Professional Documents
Culture Documents
SGS HDPE Shrink Termina SGS Nylon heat shrink SGS Single Wall tubing SGS Dual Wall tubing
butt connector
Hampool Enterprise Co.,Ltd is a professional company to supply wire and SGS Medium & Heavy Wall
Shrink Tubing
SGS Fabric Shrink Tubing SGS PVDF Shrink Tubing
(Kynar)
SGS Fiberglass Sleeve
SGS Expandable Braid Sleeve SGS PVC Tubing SGS Corrugated Tubing SGS Spiral Wrap Sleeve
HAMPOOL
IN
THE WORLD
CONTENTS
Shrink Solder Sleeve 01-17 HP-MWTA(HR) Medium wall shrink Tubing with Heat resistant glue
HP-MWTA(M) Medium wall shrink Tubing with Mastic
76
77
Non-Rohs Soldersleeve 0 1 -0 6 HP-HWTA Heavy wall Tubing with EVA glue 78
HP-SST-105 Shrink Soldersleeve 01 HP-HWTA(6X) Heavy wall Tubing with glue 79
HP-SST-105-SD Shrink Step-Down Soldersleeve 02 HP-DWT(SC) Dual Wall Tubing with Semi-Conductive Tubing outside 80
HP-SST-205 Shrink Soldersleeve 03
HP-SST-D05 Dual wall Soldersleeve 04 Non-Shrink Tubing 81-94
HP-SST-SGRS-05 Solder Grip Device Stub Splice 05 HP-PVC PVC Tubing 81-82
HP-CWT-XX-W122-5 Shrink Soldersleeve with lead (Non-Rohs) 06 HP-FGS Fiberglass Sleeve 83-84
Rohs Soldersleeve 0 7 -1 7 HP-EBS Expandable Braid Sleeve 85
HP-SST-100 Shrink Soldersleeve (Rohs) 07 HP-SCS Self-locked protective tubing 86
HP-SST-100-SD Shrink Step-Down Soldersleeve (Rohs) 08 HP-SCW Self-locked expandable protective tubing 87
HP-SST-200 Shrink Soldersleeve (Rohs) 09 HP-SWS Spiral Wrap Sleeve 88
HP-SST-300 Shrink Soldersleeve (Rohs) 10 HP-PTFE PTFE Sleeve 89-90
HP-SST-D00 Dual wall Soldersleeve (Rohs) 11 HP-CGT Corrugated Tubing 91
HP-SST-SGRS-00 Solder Grip Device Stub Splice (Rohs) 12 HP-CGT(Al) Aluminum Foil Corrugated Tube 92
HP-SST-150-X High Temperature Shrink Soldersleeve (Rohs) 13 HP-SRS Silicon Rubber Sleeve 93
HP-SST-150-X-55 High Temperature Shrink Soldersleeve with wire (Rohs) 14 HP-Mylar Mylar Insulation Sleeve 94
HP-SST-D-103 High Temperature Shrink Soldersleeve (Rohs) 15
HP-SWT-MC Mini Shrink Soldersleeve (Rohs) 16 MRO Customized Packing 95-125
HP-B-155-380X Shrink Soldersleeve (Rohs) 17 Assorted Plastic Box 95-111
Terminal 18-43 HP-ABox(HST)B-170 Shrink Single Wall Tubing Black
HP-ABox(HST)C-170 Shrink Single Wall Tubing Color
95
96
HDPE Shrink Terminal 1 8 -3 0 HP-ABox(HST)C-180 Shrink Single Wall Tubing Color 97
HP-DS-06 Shrink Butt Connector 18 HP-ABox(HST)C-30 Shrink Single Wall Tubing Color 98
HP-DS-R06 Ring Terminal 19 HP-ABox(HST)C-590 Shrink Single Wall Tubing Color 99
HP-DS-R06E Ring Terminal (Easy Entry) 20 HP-ABox(DW)C-261 Shrink Dull Wall Tubing Color 100
HP-DS-F06 Fork Terminal 21 HP-ABox(DW)B-87 Shrink Dual Wall Tubing Black 101
HP-DS-F06E Fork Terminal (Easy Entry) 22 HP-ABox(DW)C-87 Shrink Dual Wall Tubing Color 102
HP-DS-T06E Tab Terminal (Easy Entry) 23 HP-ABox(DS)-142 Shrink Terminal 103
HP-DS-P06E Push-on full insulated Terminal (Easy Entry) 24 HP-ABox(DS)-210 Shrink Terminal 104
HP-DS-PH06E Push-on half insulated Terminal (Easy Entry) 25 HP-ABox(DS)-250 Shrink Terminal 105
HP-DS-B06E Bullet Terminal (Easy Entry) 26 HP-ABox(DS)-480 Shrink Terminal 106
HP-DS-P106 Push-on Terminal 27 HP-ABox(DS)-720 Shrink Terminal 107
HP-DS-T106 Tab Terminal 28 HP-ABox(DS,SST)-150 Shrink Terminal and Soldersleeve 108- 109
HP-DS-B106 Bullet Terminal 29 HP-ABox(DS,SST)-180 Shrink Terminal and Soldersleeve 110- 111
HP-DS-ENDCAP Shrink Endcap terminal 30 Blister 112- 114
Nylon Shrink Terminal 3 1 -4 2 HP-Blister(HST) Shrink Single Wall Tubing BlackColor 112
HP-DS-N06 Shrink Butt Connector 31 HP-Blister(DS) Shrink Terminal 113
HP-DS-N06-SD Shrink Step-Down Butt Connector 32 HP-Blister(SST) Shrink Soldersleeve 114
HP-DS-NR06 Ring Terminal 33 Paper Core 115
HP-DS-NR06E Ring Terminal (Easy Entry) 34 HP-PCore(HST) 115
HP-DS-NF06 Fork Terminal 35
HP-DS-NF06E Fork Terminal (Easy Entry) 36 Paper box 116- 117
HP-DS-NT06E Tab Terminal (Easy Entry) 37 HP-PBox(HST) Shrink Single Wall Tubing 116
HP-DS-NP06E Push-on full insulated Terminal (Easy Entry) 38 HP-PBox(DW) Shrink Dual Wall Tubing 117
HP-DS-NPH06E Push-on half insulated Terminal (Easy Entry) 39
HP-DS-NB06E Bullet Terminal (Easy Entry) 40 Small Plastic Box 118- 119
HP-DS-46 High Temperature Butt Connector 41 HP-SPBox(DS) Shrink Terminal Color 118
Cold Applied Splices 4 2 -4 3 HP-SPBox(SST) Shrink Solder Sleeve Color 119
HP-CAS-436 Cold Applied Splices 42 Blue zip bag 120- 125
HP-CAS(E)-436 Cold Applied Splices(Economic) 43 HP-Zbag(DS) Shrink terminal color 120
HP-Zbag(SST) Shrink solder sleeve color 121
Shrink Tubing 44-80 HP-Zbag(HST) Shrink Single Wall Tubing Color 122- 123
Single Wall tubing HP-Zbag(DW) Shrink Dual Wall Tubing Color 124- 125
4 4 -6 6
HP-HST General Purpose shrink Tubing
HP-HST(YG) Yellow and Green Shrink Tubing
4 4 -4 5
4 6 -4 7
Special Products 126-145
HP-HST(TMS) Identification Shrink Tubing 48 HP-HSEC Heat Shrink End Cap 126
HP-HST(GRIP) Grip & Non Skid Shrink Tubing 49 HP-HSB2 Heat Shrink Breakout(2 Cores) 127
HP-HST(Rubber) Silicon Rubber Shrink Tubing 5 0 -5 1 HP-HSB3 Heat Shrink Breakout(3 Cores) 128
HP-HST(PTFE) PTFE Shrink Tubing 5 2 -5 3 HP-HSB4 Heat Shrink Breakout(4 Cores) 129
HP-HST(Viton) Viton Shrink Tubing 54 HP-HSB5 Heat Shrink Breakout(5 Cores) 130
HP-HST(DR) Diesel Resistant Shrink Tubing 55 HP-MP-I Shrink Moulded Parts I Type 131
HP-HST(DR-2) Heat Shrink Diesel-Resistant Neoprene Tubing 56 HP-MP-L Shrink Moulded Parts L Type 132
HP-KY(150) PVDF Shrink Tubing (Kynar) 57 HP-MP-Y Shrink Moulded Parts Y Type 133
HP-KY(175) PVDF Shrink Tubing (Kynar) 58 HP-MP-S Shrink Moulded Parts S Type 134
HP-HFT(5000) Fabric Shrink Tubing 59 HP-MP-W Shrink Moulded Parts W Type 135
HP-MWT Medium Wall Shrink Tubing 60 HP-HB-1506 Shrink Tape 1KV 136
HP-HWT Heavy Wall Shrink Tubing 61 HP-HB-1501 Shrink Tape 137
HP-ATT Anti Tracking Shrink Tubing 62 HP-HFSP Fiber Optic Fusion Splice Protection Sleeves 138- 139
HP-SCT Stress Control Shrink Tubing 63 HP-RSW Shrink Repair Sleeve Wraparound 140
HP-SCIT Semi Conductive Insulation Tubing 64 HP-HB-1101 Filling Mastic Tape 141
HP-BBT Busbar Shrink Tubing 6 5 -6 6 HP-HB-1103 Anti-Tracking Mastic Tape 142
HP-HB-1104 Stress-Control Mastic Tape 143
Dual Wall tubing 6 7 -8 0 HP-SLPT Self-locked protective tubing 144
HP-DW Heat Shrink Dual wall Tubing(with Adhesive) 6 7 -6 8 HP-CSS(Silicone Rubber) Cold shrink Sleeve(Silicone Rubber) 145
HP-DW-AT Heat Shrink Dual wall Tubing(Adhesive Thicker) ATUM 6 9 -7 0
HP-DW(06) HDPE shrink Tubing for Terminal 71 Tool 146-149
HP-DW(N06) Nylon shrink Tubing for Terminal 72
HP-MWTA Medium wall shrink Tubing with EVA glue 73 Crimping Tool 146- 148
HP-MWTA(PA) Medium wall shrink Tubing with Polyamide glue 74 Stripping Tool 149
HP-MWTA(FR) Medium wall shrink Tubing with Flame retardant glue 75
HP-SST-105 Shrink Soldersleeve (Non-Rohs) HP-SST-105-SD Shrink Step-Down Soldersleeve (Non-Rohs)
Characteristics Characteristics
Non-Rohs Soldersleeve
Non-Rohs Soldersleeve
● Shrinkage ratio 2:1 ● Shrinkage ratio 2:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 60℃ ● Minimum Shrink Temp. 60℃
● Minimum Fully Recover Temp.150℃ ● Minimum Fully Recover Temp.150℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation Pre-fluxed solder provide
controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides
insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to
component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire component terminals, such as motor tabs, connector pins, and switch terminals.Step Down design make it easy to connect
dimension. big size and small size wire or one wire connecting two wires.
L
L
ΦC
ΦC
A
A
ΦB ΦB ΦB ΦB
3 1 2 3
3 1 2 3
Characteristics Characteristics
Non-Rohs Soldersleeve
Non-Rohs Soldersleeve
● Shrinkage ratio 2:1 ● Shrinkage ratio 3:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 60℃ ● Minimum Shrink Temp. 60℃
● Minimum Fully Recover Temp.150℃ ● Minimum Fully Recover Temp.150℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides
controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides
insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to
component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire
dimension. dimension. Provides insulation, inspection, strain relief and water proof. The color tube appear a proper wire size and
makes installation easier and decrease the installed cost.
Technical Data
Technical Data
Operating temperature -55℃~125℃
voltage Resistant >600V Operating temperature -55℃~125℃
L MAX
ΦC
ΦA min L
ΦB ΦB ΦA min.
Characteristics Characteristics
Non-Rohs Soldersleeve
Rohs Soldersleeve
● Shrinkage ratio 2:1 ● Shrinkage ratio 2:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 90℃ ● Minimum Shrink Temp. 90℃
● Minimum Fully Recover Temp. 200℃ ● Minimum Fully Recover Temp.150℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation .Pre-fluxed solder provides
controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides controlled soldering process.These controlled soldering devices are designed for termination of a bare or tin-plated copper
insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to shield on a cable having an insulation rated for at least +85°C, meeting the dimensional criteria listed in the table above.
One piece with lead design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation and
component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire
lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to component
dimension. Shrink closed-end connectors can replace wire nuts in environments where need to be sealed. terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire dimension.
L J J
B ΦF MIN ΦG MAX
ΦA
Characteristics Characteristics
Rohs Soldersleeve
Rohs Soldersleeve
● Shrinkage ratio 2:1 ● Shrinkage ratio 2:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 60℃ ● Minimum Shrink Temp. 60℃
● Minimum Fully Recover Temp.150℃ ● Minimum Fully Recover Temp.150℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation Pre-fluxed solder provide
controlled soldering process. One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides
insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to
component terminals, such as motor tabs, connector pins, and switch terminals, it is very convenience to use the exact wire component terminals, such as motor tabs, connector pins, and switch terminals.Step Down design make it easy to connect
dimension. big size and small size wire or one wire connecting two wires.
L L
ΦC ΦC
A A
ΦB ΦB ΦB ΦB
3 1 2 3 3 1 2 3
Size Code Wire Dimensions (mm) Size Code Wire Dimensions (mm)
Φ A Min Cable size Φ A Min Cable size
Product Code Color L(mm) Qty Item 2 B Max Product Code Color L(mm) Qty Item 2 B Max
(mm) B Min C Min AWG (mm2) (mm) B Min C Min AWG (mm2)
item 3 C Max item 3 C Max
HP-SST-100- 01 White 26 1 1.7 0.4 1.7 0.76 26-24(0.25-0.5) HP-SST-100- SD-WR White/Red 40 1 1.7 1.3 2.7 0.76 26-18(0.25-1.5)
HP-SST-100-02 Red 40 1 2.7 1.3 2.7 1.2 22-18(0.5-1.5) HP-SST-100- SD-RB Red/ Blue 40 1 2.7 1.8 4.5 1.2 22-14(0.5-2.5)
HP-SST-100-03 Blue 40 1 4.5 1.8 4.5 2.0 16-14(1.5-2.5) HP-SST-100- SD-BY Blue/ Yellow 40 1 4.5 2.8 6.0 2.0 16-10(1.5-6.0)
HP-SST-100-04 Yellow 40 1 6.0 2.8 6.0 3.4 12-10(4.0-6.0) Other sizes are available upon request. Standard color: White/Red,Red/Blue,Blue/Yellow
● Item 1: Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin. Other colors are available upon request.
Other sizes are available upon request. Standard color: White, Red, Blue,Yellow ● Item 2: Solder Ring with flux
● Item 1: Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin. Other colors are available upon request. ● Item 3: Glue rings
● Item 2: Solder Ring with flux
● Item 3: Glue rings
Characteristics Characteristics
Rohs Soldersleeve
Rohs Soldersleeve
● Shrinkage ratio 2:1 ● Shrinkage ratio 2:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 60℃ ● Minimum Shrink Temp. 60℃
● Minimum Fully Recover Temp.150℃ ● Minimum Fully Recover Temp.150℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides
controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides
insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to
component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire
dimension. dimension.
L MAX L MAX
ΦC ΦC
ΦA min ΦA min
ΦB ΦB ΦB ΦB
Size Code Wire Dimensions (mm) Size Code Wire Dimensions (mm)
Φ A Min Cable size Φ A Min Cable size
Product Code Color L(mm) Qty Item 2 B Max Product Code Color L(mm) Qty Item 2 B Max
(mm) B Min C Min AWG (mm2) (mm) B Min C Min AWG (mm2)
item 3 C Max item 3 C Max
HP-SST-200-01 White 26 1 1.7 0.4 1.7 0.76 26-24(0.25-0.5) HP-SST-300-01 White 26 2 1.7 0.4 1.7 0.76 26-24(0.25-0.5)
HP-SST-200-02 Red 40 2 2.7 1.3 2.7 1.2 22-18(0.5-1.5) HP-SST-300-02 Red 30 3 2.7 1.3 2.7 1.2 22-18(0.5-1.5)
HP-SST-200-03 Blue 40 2 4.5 1.8 4.5 2.0 16-14(1.5-2.5) HP-SST-300-03 Blue 35 3 4.5 1.8 4.5 2.0 16-14(1.5-2.5)
HP-SST-200-04 Yellow 40 2 6.0 2.8 6.0 3.4 12-10(4.0-6.0) HP-SST-300-04 Yellow 40 3 6.0 2.8 6.0 3.4 12-10(4.0-6.0)
Other sizes are available upon request. Standard color: White, Red, Blue,Yellow Other sizes are available upon request. Standard color: White, Red, Blue,Yellow
● Item 1: Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin. Other colors are available upon request. ● Item 1: Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin. Other colors are available upon request.
● Item 2: Solder Ring with flux ● Item 2: Solder Ring with flux
● Item 3: Glue rings ● Item 3: Glue rings
Characteristics Characteristics
Rohs Soldersleeve
Rohs Soldersleeve
● Shrinkage ratio 3:1 ● Shrinkage ratio 2:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 60℃ ● Minimum Shrink Temp. 90℃
● Minimum Fully Recover Temp.150℃ ● Minimum Fully Recover Temp.200℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides
controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides
insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to
component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire
dimension. Provides insulation, inspection, strain relief and water proof. The color tube appear a proper wire size and dimension. Shrink closed-end connectors can replace wire nuts in environments where need to be sealed.
makes installation easier and decrease the installed cost.
Technical Data
Technical Data
Operating temperature -55℃~175℃
Operating temperature -55℃~125℃ voltage Resistant >600V
voltage Resistant >600V Protection type IP67
Protection type IP67 Volume Resistivity (Ω cm) ≥1013
Volume Resistivity (Ω cm) ≥1015 Dielectric Strength (KV/mm) ≥31.5
Dielectric Strength (KV/mm) ≥25
L
B
L
ΦA
ΦA min.
Characteristics Characteristics
Rohs Soldersleeve
Rohs Soldersleeve
● Shrinkage ratio 2:1 ● Shrinkage ratio 2:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 60℃ ● Minimum Shrink Temp. 60℃
● Minimum Fully Recover Temp. 200℃ ● Minimum Fully Recover Temp. 200℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Combined by high temperature PVDF shrinkable sleeve and preassembled earth conductor, the solder terminal is Combined by high temperature PVDF shrinkable sleeve and preassembled earth conductor, the solder terminal is
specially used for shielding and insulating high temperature electric wires and cables with tinplated or silver plated specially used for shielding and insulating high temperature electric wires and cables with tinplated or silver plated
terminal, and meets requirements of SAE-AS83519/2 and VG95343-101.Performance Characteristics: Integrated terminal, and meets requirements of SAE-AS83519/2 and VG95343-101.Performance Characteristics: Integrated
structural design reduces welding requirements on workers;Transparent shrinkable tube ensures the continuity of structural design reduces welding requirements on workers;Transparent shrinkable tube ensures the continuity of
insulating layer and plays a role of stress relieving;Accurately mixed soldering tin and soldering flux ensure cleaning of insulating layer and plays a role of stress relieving;Accurately mixed soldering tin and soldering flux ensure cleaning of
welding spot and welding reliability;Melting of fusible seal ring ensures the tightness of two ends of welding welding spot and welding reliability;Melting of fusible seal ring ensures the tightness of two ends of welding
spot;Optional preassembled outgoing line can be used for outputting shielding signal. spot;Optional preassembled outgoing line can be used for outputting shielding signal.
L L1 ΦD Φ D1 Φ D2 Φ D3 Φ D4 Φ D4 L2 L L1 ΦD Φ D1 Φ D2 Φ D3 Φ D4 Φ D4 L2
Part No Part No
mm Min mm Min mm Min mm Max mm Min mm Max mm Min mm mm mm Min mm Min mm Min mm Max mm Min mm Max mm Min mm mm
HP-SST-150-01 16.5 8.25 1.90 2.70 2.70 0.90 1.90 0.50 6.35~8.25 HP-SST-150-01-55 16.5 8.25 1.90 2.70 2.70 0.90 1.90 0.50 7.5
HP-SST-150-02 16.5 8.25 2.70 3.70 3.70 1.40 2.70 0.75 6.35~8.25 HP-SST-150-02-55 16.5 8.25 2.70 3.70 3.70 1.40 2.70 0.75 7.5
HP-SST-150-03 16.5 8.25 4.30 5.00 5.10 2.15 4.30 1.25 6.35~8.25 HP-SST-150-03-55 16.5 8.25 4.30 5.00 5.10 2.15 4.30 1.25 7.5
HP-SST-150-04 19.1 8.25 6.00 6.50 6.50 3.30 6.00 1.80 6.35~8.25 HP-SST-150-04-55 19.1 8.25 6.00 6.50 6.50 3.30 6.00 1.80 7.5
HP-SST-150-05 19.1 8.25 7.00 7.50 7.60 4.30 7.00 2.50 6.35~8.25 HP-SST-150-05-55 19.1 8.25 7.00 7.50 7.60 4.30 7.00 2.50 7.5
Other sizes are available upon request. Standard color: Blue Other sizes are available upon request. Standard color: Blue
Other colors are available upon request. Other colors are available upon request.
Characteristics Characteristics
Rohs Soldersleeve
Rohs Soldersleeve
● Shrinkage ratio 2:1 ● Shrinkage ratio 2:1
● Waterproof for wiring splices ● Waterproof for wiring splices
● Transparent sleeve provides precise inspection ● Transparent sleeve provides precise inspection
● Easy control soldering process ● Easy control soldering process
● Minimum Shrink Temp. 80℃ ● Minimum Shrink Temp. 60℃
● Minimum Fully Recover Temp. 200℃ ● Minimum Fully Recover Temp.150℃
● Fully melt temperature of solder: 138℃ ● Fully melt temperature of solder: 138℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Integrated structural design reduces welding requirements on workers;�Transparent shrinkable tube ensures the continuity Mini Shrink Soldersleeve with heat-shrinkable radiation cross-linked modified polyolefin insulation.Transparent insulation
of insulating layer and plays a role of stress relieving;�Accurately mixed soldering tin and soldering flux ensure cleaning of sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides controlled soldering process.
welding spot and welding reliability;�Melting of fusible seal ring ensures the tightness of two ends of welding spot;� One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation and lower the
Optional preassembled outgoing line can be used for outputting shielding signal.Combined by high temperature PVDF installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to component terminals, such as
shrinkable sleeve and preassembled earth conductor, the solder terminal is specially used for shielding and insulating high motor tabs, connector pins, and switch terminals, it is very convenience to use the exact wire dimension.
temperature electric wires and cables with tinplated or silver plated terminal, and meets requirements of SAE-AS83519/2
and VG95343-101. Technical Data
Operating temperature -55℃~125℃
Technical Data
voltage Resistant >600V
Operating temperature -55℃~175℃
Protection type IP67
voltage Resistant >600V
Volume Resistivity (Ω cm) ≥1015
Protection type IP67
Dielectric Strength (KV/mm) ≥25
Volume Resistivity (Ω cm) ≥1015
Dielectric Strength (KV/mm) ≥25
Characteristics Characteristics
Rohs Soldersleeve
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides HP-DS-06 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and
controlled soldering process. One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides corrosion. Providing strain relief and against vibration in rugged environment, which completely insulates and protects
insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to electrical connections. In the middle of the splice is high pure copper tube, with excellent conductivity property. HP-DS-06
component terminals, such as motor tabs, connector pins, and switch terminals, it is very convenience to use the exact wire offers long-term performance, easy installation, and a low installed cost, which is more reliable than conventional crimp
dimension. terminals.
d D
Characteristics Characteristics
HDPE Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-R06 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and HP-DS-R06E the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals. than conventional crimp terminals.
Technical Data Technical Data
Property Specification Requirements Test Methods Typical Value Property Specification Requirements Test Methods Typical Value
Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa
Elongation at break (Room temp.) Min. 200% ISO37 280% Elongation at break (Room temp.) Min. 200% ISO37 280%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 200% Elongation after aging(158℃/168hrs) Min.100% ISO37 200%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity Min. 1014Ω-cm ASTMD2671 Pass Volume resistivity Min. 1014Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Part No D d1 d2 B E L Color Conductor Wall Of Cooper Terminal Part No D d1 d2 B E L Color Conductor Wall Of Cooper Terminal
HP-DS-R06R4 4.8 1.6 4.3 8.0 21 28 HP-DS-R06R4E 4.8 1.6 4.3 8.0 21 28
HP-DS-R06R5 4.8 1.6 5.3 9.5 21 30 HP-DS-R06R5E 4.8 1.6 5.3 9.5 21 30
Red 0.5-1.5mm2 0.7mm Red 0.5-1.5mm2 0.7mm
HP-DS-R06R6 4.8 1.6 6.5 11.6 21 33 HP-DS-R06R6E 4.8 1.6 6.5 11.6 21 33
(AWG22-18) (AWG22-18)
HP-DS-R06R8 4.8 1.6 8.5 11.6 21 35 HP-DS-R06R8E 4.8 1.6 8.5 11.6 21 35
HP-DS-R06R10 4.8 1.6 10.5 13.6 21 38 HP-DS-R06R10E 4.8 1.6 10.5 13.6 21 38
HP-DS-R06B4 5.8 2.2 4.3 8.5 21 28 HP-DS-R06B4E 5.8 2.2 4.3 8.5 21 28
HP-DS-R06B5 5.8 2.2 5.3 9.5 21 30 HP-DS-R06B5E 5.8 2.2 5.3 9.5 21 30
HP-DS-R06B6 5.8 2.2 6.5 12 21 33 1.5-2.5mm2 HP-DS-R06B6E 5.8 2.2 6.5 12 21 33 1.5-2.5mm2
Blue 0.8mm Blue 0.8mm
HP-DS-R06B8 5.8 2.2 8.5 12 21 35 (AWG16-14) HP-DS-R06B8E 5.8 2.2 8.5 12 21 35 (AWG16-14)
HP-DS-R06B10 5.8 2.2 10.5 13.6 21 38 HP-DS-R06B10E 5.8 2.2 10.5 13.6 21 38
HP-DS-R06B12 5.8 2.2 12.5 19.2 21 38 HP-DS-R06B12E 5.8 2.2 12.5 19.2 21 38
HP-DS-R06Y4 6.8 3.4 4.3 9.5 25 32 HP-DS-R06Y4E 6.8 3.4 4.3 9.5 25 32
HP-DS-R06Y5 6.8 3.4 5.3 9.5 25 34 HP-DS-R06Y5E 6.8 3.4 5.3 9.5 25 34
HP-DS-R06Y6 6.8 3.4 6.5 12 25 37 HP-DS-R06Y6E 6.8 3.4 6.5 12 25 37
Yellow 4.0-6.0mm Yellow 4.0-6.0mm
2 2
1.0mm 1.0mm
HP-DS-R06Y8 6.8 3.4 8.5 15 25 39 (AWG12-10) HP-DS-R06Y8E 6.8 3.4 8.5 15 25 39 (AWG12-10)
HP-DS-R06Y10 6.8 3.4 10.5 15 25 42 HP-DS-R06Y10E 6.8 3.4 10.5 15 25 42
HP-DS-R06Y12 6.8 3.4 12.5 19.2 25 42 HP-DS-R06Y12E 6.8 3.4 12.5 19.2 25 42
Other sizes are available upon request. Standard color: Red, Blue,Yellow. Other sizes are available upon request. Standard color: Red, Blue,Yellow
Characteristics Characteristics
HDPE Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-F06 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and HP-DS-F06E the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals. than conventional crimp terminals.
HP-DS-F06B4 5.8 2.2 4.3 8.1 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm HP-DS-F06B4E 5.8 2.2 4.3 8.1 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm
HP-DS-F06B5 5.8 2.2 5.3 9.5 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm HP-DS-F06B5E 5.8 2.2 5.3 9.5 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm
Characteristics Characteristics
HDPE Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-T06E the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and HP-DS-P06E the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals.
than conventional crimp terminals.
HP-DS-T06Y48E 6.8 3.4 4.8x0.8 25 32 Yellow 4.0-6.0mm2 (AWG12-10) 0.4mm HP-DS-P06Y48E 6.8 3.4 5.2 4.8x0.8 32 Yellow 4.0-6.0mm2 (AWG12-10) 0.4mm
HP-DS-T06R63E 4.8 1.6 6.3x0.8 21 28 Red 0.5-1.5mm2 (AWG22-18) 0.4mm HP-DS-P06R63E 6.2 1.6 6.6 6.3x0.8 30 Red 0.5-1.5mm2 (AWG22-18) 0.4mm
Characteristics Characteristics
HDPE Shrink Terminal
Application: Application:
HP-DS-PH06E the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and HP-DS-B06E the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals.
than conventional crimp terminals.
Technical Data
Technical Data
Property Specification Requirements Test Methods Typical Value
Property Specification Requirements Test Methods Typical Value Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa
Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa Elongation at break (Room temp.) Min. 200% ISO37 280%
Elongation at break (Room temp.) Min. 200% ISO37 280% Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa Elongation after aging(158℃/168hrs) Min.100% ISO37 200%
Elongation after aging(158℃/168hrs) Min.100% ISO37 200% Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Withstand 2.5 KV for 1minute and breakdown
Voltage withstand (Aged) at least half of un-aged breakdown voltage UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Characteristics Characteristics
HDPE Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-P106 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and HP-DS-T106 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and
corrosion. Half part non shrink plug-in terminal providing strain relief and against vibration in rugged environments, which corrosion. Half part non shrink plug-in terminal providing strain relief and against vibration in rugged environments,
excellently insulates and protects electronic connections. It offer long-term performance, easy installation, and a low which excellently insulates and protects electronic connections. It offer long-term performance, easy installation, and a
installed cost, which is more reliable than conventional crimp terminals. low installed cost, which is more reliable than conventional crimp terminals.
HP-DS-P106Y63 8.0 6.6 0.8 35 Yellow 4.0-6.0mm2 (AWG12-10) 0.4mm HP-DS-T106Y63 8.0 6.6 0.8 35 Yellow 4.0-6.0mm2 (AWG12-10) 0.4mm
Other sizes are available upon request. Standard color: Red, Blue,Yellow. Other sizes are available upon request. Standard color: Red, Blue,Yellow.
Characteristics Characteristics
HDPE Shrink Terminal
Application: Application:
HP-DS-B106 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and HP-DS-END CAP the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Half part non shrink plug-in terminal providing strain relief and against vibration in rugged environments, which
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable excellently insulates and protects electronic connections. It offer long-term performance, easy installation, and a low
installed cost, which is more reliable than conventional crimp terminals.
than conventional crimp terminals.
Technical Data
Technical Data
Property Specification Requirements Test Methods Typical Value
Property Specification Requirements Test Methods Typical Value
Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa Tensile strength(Room temp.) Min. 16Mpa -ISO37 17.2Mpa
Elongation at break (Room temp.) Min. 200% ISO37 280%
Elongation at break (Room temp.) Min. 200% ISO37 280%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 200% Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Elongation after aging(158℃/168hrs) Min.100% ISO37 200%
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% Withstand 2.5 KV for 1minute and breakdown
UL224 Pass Voltage withstand (Aged) UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass at least half of un-aged breakdown voltage
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
ΦB Volume resistivity Min. 10 Ω-cm
14
ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Wall Of Cooper
Part No Type A min B nom C L max Color Conductor
Terminal
HP-DS-B106MR4 M 6.2 4 35 Red 0.5-1.0mm2 (AWG22-18) 0.4mm
Characteristics Characteristics
Nylon Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-N06 the high transparency heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from HP-DS-06(SD) the high transparency heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices
water and corrosion. Providing strain relief and against vibration in rugged environment, which completely insulates and from water and corrosion. Providing strain relief and against vibration in rugged environment, which completely insulates
protects electrical connections. In the middle of the splice is high pure copper tube, with excellent conductivity property. It and protects electrical connections. In the middle of the splice is high pure copper tube, with excellent conductivity
offers long-term performance, easy installation, and a low installed cost, which is more reliable than conventional crimp property. It offers long-term performance, easy installation, and a low installed cost, which is more reliable than
terminals. conventional crimp terminals.
Technical Data
Technical Data
Property Specification Requirements Test Methods Typical Value Property Specification Requirements Test Methods Typical Value
Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Elongation at break (Room temp.) Min. 200% ISO37 450%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa Elongation at break (Room temp.) Min. 200% ISO37 450%
Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Withstand 2.5 KV for 1minute and breakdown
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Voltage withstand (Aged) UL224 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass at least half of un-aged breakdown voltage
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
d D
Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity Min. 10 Ω-cm
14
ASTMD2671 Pass
F Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
L
Characteristics Characteristics
Nylon Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-NR06 the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and HP-DS-NR06E the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals.
than conventional crimp terminals.
Technical Data
Property Specification Requirements Test Methods Typical Value
Technical Data
Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa Property Specification Requirements Test Methods Typical Value
Elongation at break (Room temp.) Min. 200% ISO37 450% Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa Elongation at break (Room temp.) Min. 200% ISO37 450%
Elongation after aging(158℃/168hrs) Min.100% ISO37 220% Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage Withstand 2.5 KV for 1minute and breakdown
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Voltage withstand (Aged) at least half of un-aged breakdown voltage UL224 Pass
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Characteristics Characteristics
Nylon Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-NF06 the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and HP-DS-NF06E the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals. than conventional crimp terminals.
Technical Data Technical Data
Property Specification Requirements Test Methods Typical Value Property Specification Requirements Test Methods Typical Value
Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Elongation at break (Room temp.) Min. 200% ISO37 450% Elongation at break (Room temp.) Min. 200% ISO37 450%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 220% Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
HP-DS-NF06B4 5.8 2.2 4.3 8.1 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm HP-DS-NF06B4E 5.8 2.2 4.3 8.1 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm
HP-DS-NF06B5 5.8 2.2 5.3 9.5 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm HP-DS-NF06B5E 5.8 2.2 5.3 9.5 21 30 Blue 1.5-2.5mm2 (AWG16-14) 0.8mm
Characteristics Characteristics
Nylon Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-NT06E the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and HP-DS-NP06E the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals.
than conventional crimp terminals.
Technical Data Technical Data
Property Specification Requirements Test Methods Typical Value Property Specification Requirements Test Methods Typical Value
Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Elongation at break (Room temp.) Min. 200% ISO37 450% Elongation at break (Room temp.) Min. 200% ISO37 450%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 220% Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity Min. 1014Ω-cm ASTMD2671 Pass Volume resistivity Min. 1014Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
HP-DS-NT06Y48E 6.8 3.4 4.8x0.8 25 32 Yellow 4.0-6.0mm2 (AWG12-10) 0.4mm HP-DS-NP06Y48E 6.8 3.4 5.2 4.8x0.8 32 Yellow 4.0-6.0mm2 (AWG12-10) 0.4mm
HP-DS-NT06R63E 4.8 1.6 6.3x0.8 21 28 Red 0.5-1.5mm2 (AWG22-18) 0.4mm HP-DS-NP06R63E 6.2 1.6 6.6 6.3x0.8 30 Red 0.5-1.5mm2 (AWG22-18) 0.4mm
Characteristics Characteristics
Nylon Shrink Terminal
Application: Application:
HP-DS-NPH06E the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and HP-DS-NB06E the heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and
corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals. than conventional crimp terminals.
Characteristics Characteristics
Nylon Shrink Terminal
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DS-46 The Mini Sealing crimp connector consist of the PVDF heat shrink outer and copper nickel tin crimp sealed HP-CAS-436 cold applied splice product line is designed as a single-component in-line splice that requires no heat to
with waterproof hot melt adhesive. It can be used in The variety of harsh environment for it is high temperature install. It seals the termination and prevents the ingress of moisture which can lead to insulation failure and breakdown of
resistant , immersion-Resistant, chemical-resistant. Such as aviation, military and other fields. the electrical connection.
In this product, sealing is achieved by replacing traditional methods, such as grommets, greases, and tapes with a novel gel
Technical Data technology. A polymer outer layer provides electrical isolation.
Property Specification Requirements Test Methods Typical Value Technical Data
Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa Property Specification Requirements Test Methods Typical Value
Elongation at break (Room temp.) Min. 200% ISO37 450% Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Elongation at break (Room temp.) Min. 200% ISO37 450%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 220% Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Withstand 2.5 KV for 1minute and breakdown
Withstand 2.5 KV for 1minute and breakdown Voltage withstand (Aged) UL224 Pass
at least half of un-aged breakdown voltage
Voltage withstand (Aged) UL224 Pass
at least half of un-aged breakdown voltage Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Volume resistivity Min. 1014Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
ΦB ΦA
A A
B
d D
End Cap L±1.0 ФA±0.5 ФB±0.25 ФC±0.5 E±0.25 J±0.25
L Part No
Color code (mm) (mm) (mm) (mm) (mm) (mm)
Wire Range
Characteristics Characteristics
Cold Applied Splices
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
The cold applied splice(Economic) product line is designed at a single component in-line splice to provide high HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke generating, abrasion resistant and in
environmental protection to seal the termination from moisture and provide electrical isolation. If moisture is present,it
case of burning products no dioxin. HP-HST has excellent electrical and physical properties, including excellent acid
can lead to insulation failure and breakdown of the electrical connection.
fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive electronics, terminal lugs, small
Technical Data electrical parts, lead wires of toy motors and transformers etc. This product is UL listed under file number E361230.
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Volume resistivity 10 Ω•cm min.
14
ASTM D 876 ≥1014 Ω•cm
Corrosion No corrosion ASTM D 2671 No corrosion
Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Flammability VW-1 UL224 pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass As supplied After recovered Standard Package
Size (mm)
Internal diameter(mm) Internal diameter Max(mm) Wall thickness Nom(mm) M/Roll
■ 3:1
Ф1.5 1.5 0.5 0.45±0.1 200
Ф3.0 3 1 0.55±0.1 200
Ф4.5 4.5 1.5 0.60±0.1 100
Ф6.0 6 2 0.65±0.1 100
Ф9.0 9 3 0.75±0.15 50
Ф12.0 12 4 0.75±0.15 50
Part No Color code L±1.0 (mm) ФA±0.5 (mm) ФB±0.25 (mm) ФC±0.5 (mm) E±0.25 (mm)
Ф15.0 15 5 0.80±0.15 50
HP-CAS(E)-436-01 Red 36 4.8 4.5 4.7 15 Ф18.0 18 6 0.85±0.15 50
Ф12 12.5±0.3 6 0.6 100 Elongation at break 200% min. ASTM D 638 ≥400%
Tensile strength after ageing (175℃,168hrs) 7.28 MPa min. ASTM D 638 ≥10.4 MPa
Ф13 13.5±0.3 6.5 0.65 100
Elongation after ageing (175℃,168hrs) 100% min. ASTM D 638 ≥300%
Ф14 14.5±0.3 7 0.65 100
Heat shock(250℃,4hrs) No crack ASTM D 2671 No crack
Ф15 15.5±0.4 7.5 0.7 100
Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack
Ф16 16.5±0.4 8 0.7 100
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown
Ф17 17.5±0.4 8.5 0.7 100 Dielectric strength 19.7 KV/mm min. ASTM D 2671 ≥25 KV/mm
Ф18 19.0±0.5 9 0.8 100 Volume resistivity 1014 Ω•cm min. ASTM D 876 ≥1014 Ω•cm
Ф20 21.0±0.5 10 0.8 100 Corrosion No corrosion ASTM D 2671 No corrosion
Ф22 23.0±0.5 11 0.8 100 Flammability VW-1 UL224 pass
Φ4.5 5.0±0.4 0.25±0.08 ≤2.30 0.45±0.10 2.35~4.0 100 -55℃ >60° 2:1
Φ50 51.0±0.7 0.55±0.15 ≤25.0 1.00±0.20 26~49 25 Φ 1.6 2.00±0.20 3.7±0.3 0.47±0.10 ≤0.53 0.52±0.06
Φ 2.4 2.79±0.20 5.0±0.3 0.47±0.10 ≤0.79 0.57±0.06
Φ60 ≥60 0.60±0.15 ≤30.0 1.10±0.20 35~55 25
Φ 3.2 3.64±0.23 6.3±0.4 0.48±0.10 ≤1.06 0.61±0.06
Φ70 ≥70 0.65±0.15 ≤35.0 1.20±0.20 40~65 25
Φ 4.8 5.26±0.25 8.9±0.4 0.49±0.10 ≤1.59 0.67±0.06
Φ80 ≥80 0.70±0.15 ≤40.0 1.30±0.20 45~75 25 Φ 6.4 6.92±0.28 11.5±0.4 0.50±0.10 ≤2.36 0.71±0.06
Φ90 ≥90 0.75±0.15 ≤45.0 1.50±0.20 50~88.0 25 Φ 9.5 10.2±0.32 16.7±0.5 0.52±0.11 ≤3.18 0.77±0.06
Φ100 ≥100 0.80±0.20 ≤50.0 1.65±0.20 55~95.0 25 Φ 12.7 13.5±0.36 21.8±0.6 0.53±0.11 ≤4.75 0.80±0.07
Characteristics Characteristics
Single Wall Tubing
and upgrade product value. ● Thermal insulation & heat shock protection
● Different colors and private pattern are available on
● Voltage Class: 1000V
request for individual design.
● Economical and easy to install, it’s extremely proper ● High & Low temperature resistance
to DIY market.
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Non-Slip Heat Shrink Tubing(NHST) is Widely applied in tennis racket, badminton racket, fishing rod, baseball ● Suitable for medical apparatus that require sterilization treatment
bat,billiard cue, hockey stick, industrial hand tool, athletic equipment and various handles. Increased friction and ● Heating element insulation and electrical wiring terminal insulation
safety on smooth surfaces minimizes slipping. ● Fiber optic bundle sheathing
Technical Data
Technical Data
Property Requirement Test method Typical data
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5% Property Test Methods Typical data
Tensile strength 10.4 MPa min. ASTM D 638 ≥12 MPa
Shrink Temperature Company Standard 135℃
Elongation at break 200% min. ASTM D 638 ≥400%
Tensile strength after ageing (175℃,168hrs) 7.28 MPa min. ASTM D 638 ≥10.4 MPa Operating Temperature Range UL224 -70℃-200℃
Elongation after ageing (175℃,168hrs) 100% min. ASTM D 638 ≥300%
Tensile Strength ASTM D638 ≥19MPa
Heat shock(250℃,4hrs) No crack ASTM D 2671 No crack
Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack Elongation at break ASTM D638 ≥200%
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown
Dielectric strength 19.7 KV/mm min. ASTM D 2671 ≥25 KV/mm Anti-aging at high temperature ASTM D2671(300℃,168h) No Crack,No flow
Size As supplied (mm) After recovered (mm) Standard Corrosion Resistance ASTM D2671 Great
0.5±0.1 2
Application:
Φ3.5 3.5 0.7±0.1 1.75 0.75±0.1
HP-HST(PTFE) is specially used in the surroundings of extreme electricity, chemistry and heat.
Φ4.0 4 0.5±0.1 2.5 0.7±0.1 2 0.75±0.1
Technical Data
Φ4.0 4 0.5±0.1 2.5 0.7±0.1 2 0.75±0.1
Item Test Method Specifications
Φ4.5 4.5 0.5±0.1 2.8 0.7±0.1 2.25 0.75±0.1 Specific Gravity(g/cm3) ASTM D792 2.16
Tensile Strength(MPa) ASTM D638 24.5
Φ5.0 5 0.5±0.1 3 0.7±0.1 2.5 0.75±0.1
Elongation Ratio(%) ASTM D638 350
Φ6.0 6 0.5±0.1 3.8 0.7±0.1 3 0.75±0.1 Flexural Modulus(MPa) ASTM D790 490
Impact Strength ASTM D256+23℃-54℃J/m -No Break-107
Φ6.5 6 0.5±0.1 3.8 0.7±0.1 3 0.75±0.1
Hardness (Shore D) ASTM D2240 55
Φ7.0 7 0.5±0.1 4 0.7±0.1 3.5 0.75±0.1 Coefficient Of Dynamic Friction -- 0.1
Melting Point(℃) -- 327
Φ8.0 8 0.5±0.1 4.8 0.7±0.1 4 0.75±0.1
Service Temperature 20000h With 50% Retention Of Ultimate Elongation(℃) -- 260
Φ9.0 9 0.5±0.1 5 0.7±0.1 4.5 0.75±0.1 Inflammability UL-224 VW-1
Dielectric Constant At 103-106Hz ASTM D150 2.1
Φ10 10 1.0±0.1 6.5 1.7±0.1 5 1.5±0.1
Dissipation Factor At 106Hz ASTM D150 0.0002
Φ11 10 1.0±0.1 6.5 1.7±0.1 5 1.5±0.1 Arc Resistance(S) ASTM D495 (Stainless Steel Electrodes) >300
Volume Resistivity(Ω·cm) ASTM D257 >1018
Φ12 12 1.0±0.1 7 1.7±0.1 6 1.5±0.1
Weather Resistance “Weather-O-Meter” (2000h) No cracking
Φ13 12 1.0±0.1 7 1.7±0.1 6 1.5±0.1 Solvent Resistance ASTM D543 Excellent
Chemical Resistance ASTM D543 Excellent
Φ15 15 1.0±0.1 9 1.7±0.1 7.5 1.5±0.1
Withstanding voltage ASTM D543 1.5KV
Φ16 16 1.0±0.1 9 1.7±0.1 8 1.5±0.1
Size:
Φ16 16 1.0±0.1 9 1.7±0.1 8 1.5±0.1 As Supplied (mm) After Recovery Wall-thickness(mm)
Size
Inside Diameter Thin section Thick section
Φ18 18 1.0±0.1 9 1.7±0.1 9 1.5±0.1
■ 4:1
Φ20 20 1.0±0.1 13 1.7±0.1 10 1.5±0.1 Φ1.5 1.5±0.2 ≤0.40 0.25±0.05
Φ25 25 1.0±0.1 15 1.7±0.1 12.5 1.5±0.1 Φ2.0 2.0±0.2 ≤0.50 0.25±0.05
Φ2.5 2.5±0.2 ≤0.50 0.25±0.05
Φ30 30 1.0±0.1 18 1.7±0.1 15 1.5±0.1
Φ3.0 3.0±0.2 ≤0.70 0.25±0.05
Φ35 35 1.0±0.1 20 1.7±0.1 17.5 1.5±0.1 Φ3.5 3.5±0.2 ≤0.80 0.25±0.05
Φ4.0 4.0±0.2 ≤1.0 0.25±0.05
Φ40 40 1.0±0.1 30 1.7±0.1 20 1.5±0.1
Φ4.5 4.5±0.2 ≤1.20 0.30±0.05
Φ60 60 1.5±0.1 38 2.5±0.1 30 1.5±0.1 Φ5.0 5.0±0.2 ≤1.30 0.30±0.05
Φ70 70 1.5±0.1 45 2.5±0.1 35 1.5±0.1 Φ6.0 6.0±0.3 ≤1.50 0.30±0.05
Φ8.0 8.0±0.3 ≤2.0 0.35±0.05
Φ80 80 1.5±0.1 48 2.5±0.1 40 1.5±0.1
Φ9.0 9.0±0.3 ≤2.2 0.35±0.05
Other sizes are available upon request. Standard color: Clear, Black, other colors are available upon request. Other Size and wall thickness is available as customer’s order. The standard color is clear.
We can pack according to customer’s requests.
Ф18.0 18.0±0.3 ≤10.5 0.6±0.1 1/8 Ф3.2 3.2 1.6 0.76±0.13 100
3/16 Ф4.8 4.8 2.4 0.89±0.18 50
Ф19.0 19.0±0.3 ≤11.2 0.6±0.1 1/4 Ф6.4 6.4 3.2 0.89±0.18 50
3/8 Ф9.5 9.5 4.8 0.89±0.18 50
Ф20.0 20.0±0.3 ≤11.8 0.6±0.1
1/2 Ф12.7 12.7 6.4 0.89±0.18 50
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-HST(DR) is flexible, flame-retardant Diseal-Resistant elastomer heat shrinkable tubing. It is made of irradiation HP-HST(DR-2) is made of irradiation cross-linked flexible neoprene rubber. It is very flexible, excellent resistance to diesel,
cross-linked specially formulated flexible elastomeric compounds. With resistance to aviation and diesel fuels, hydraulic fluids and solvents. Particularly suitable applied to resistance of diesel fuels, hydraulic fluids, lubrication oils, and abrasion
fluids, and lubricating oils, DR is ideal for applications require resistance to fuels, fluids and solvents. It is particularly resistance. Widely used for insulation, strain relief, and abrasion protection on cable harnesses and wire bundles in the
suitable for protecting and bundling of high-performance cables and wiring harnesses. commercial military and aerospace industries.
Size: Size:
Size As supplied (mm) After recovered (mm) Standard packing Size As supplied (mm) After recovered (mm) Standard packing
inch mm Inside diameter (min.) Inside diameter (max.) Wall thickness (m/roll)
inch mm Inside diameter (min.) Inside diameter (max.) Wall thickness (m/roll)
3/32 Ф2.4 2.4 1.2 0.51±0.15 200
3/32 Ф2.4 2.4 1.2 0.51±0.08 200 1/8 Ф3.2 3.2 1.6 0.69±0.20 100
1/8 Ф3.2 3.2 1.6 0.76±0.15 100 3/16 Ф4.8 4.8 2.5 0.84±0.25 100
3/16 Ф4.8 4.8 2.4 0.84±0.15 100 1/4 Ф6.4 6.4 3.6 0.88±0.25 100
3/8 Ф9.5 9.5 5.4 1.02±0.25 50
1/4 Ф6.4 6.4 3.2 0.89±0.15 100
1/2 Ф12.7 12.7 7.3 1.21±0.38 50
3/8 Ф9.5 9.5 4.8 1.02±0.20 50 5/8 Ф15.9 15.9 9.1 1.32±0.38 50
1/2 Ф12.7 12.7 6.4 1.22±0.20 50 3/4 Ф19.1 19.1 10.9 1.44±0.38 30
3/4 Ф19.1 19.1 9.5 1.45±0.28 30 7/8 Ф22.2 22.2 12.7 1.65±0.38 30
1 Ф25.4 25.4 14.5 1.78±0.50 30
1 Ф25.4 25.4 12.7 1.78±0.28 30
11/4 Ф31.8 31.8 18.1 2.20±0.50 30
1 1/2 Ф38.1 38.1 19.1 2.41±0.41 30 11/2 Ф38.1 38.1 21.8 2.41±0.50 30
2 Ф50.8 50.8 25.4 2.79±0.41 25 2 Ф50.8 50.8 29 2.79±0.50 25
Other sizes are available upon request. Standard color: Black. Other sizes are available upon request. Standard color: Black.
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-KY(150) is clear, thin wall, flexible, flame Retardant heat shrinkable tubing with excellent Resistance. It is made of HP-KY(175) is clear, thin-wall, semi-rigid, flame-retardant heat-shrinkable tubing with both high temperature and chemical
irradiation cross-linked special fluoropolymer with outstanding chemical and solvent resistance to be used for where to resistance. Especially suitable for applications requiring high temperature performance, outstanding abrasion resistance
need high-temperature and abrasion resistance. To prevent wire and cable markers from mechanical and chemical abuse. and cut-through resistance, or superior chemical and solvent properties. Provides electrical insulation and strain relief of
It is especially suitable for applications requiring abrasion and cut-through resistance, or superior chemical and solvent multipoint connectors and solder joints. HP-KY(175℃) Ideal for applications that require dense packing of components or
resistance properties. Provides electrical insulation and strain relief of multipoint connectors and solder joints. visual inspection of covered components. Standard: UL224, SAE-AMS-DTL25053/8
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5% Longitudinal shrinkage ≤10% ASTM D 2671 ≤5%
Tensile strength 17.3MPa min. ASTM D 638 ≥35MPa Tensile strength 34.5 MPa min. ASTM D 638 ≥45MPa
Elongation at break 150% min. ASTM D 638 ≥300% Elongation at break 150% min. ASTM D 638 ≥300%
Elongation after ageing (225℃,168hrs) 100% ASTM D 638 ≥200% Elongation after ageing (250℃,168hrs) 50% min. ASTM D 638 ≥200%
Heat shock(275℃,4hrs) No crack ASTM D 2671 No crack Heat shock(300℃,4hrs) No crack ASTM D 2671 No crack
Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown
Volume resistivity 1011 Ω•cm min. ASTM D 876 ≥1012 Ω•cm Volume resistivity 1013 Ω•cm min. ASTM D 876 ≥1013 Ω•cm
Corrosion No corrosion ASTM D 2671 No corrosion Corrosion No corrosion ASTM D 2671 No corrosion
Size: Size:
Size As supplied (mm) After recovered (mm) Standard packing Size As supplied (mm) After recovered (mm) Standard packing
inch mm Inside diameter (min.) Inside diameter (max.) Wall thickness (m/pc, m/roll) inch mm Inside diameter (min.) Inside diameter (max.) Wall thickness (m/pc, m/roll)
3/64 Ф1.2 1.2 0.6 0.25±0.05 1.2/200 3/64 Ф1.2 1.2 0.6 0.25±0.05 1.2/200
1/16 Ф1.6 1.6 0.8 0.25±0.05 1.2/200 1/16 Ф1.6 1.6 0.8 0.25±0.05 1.2/200
3/32 Ф2.4 2.4 1.2 0.25±0.05 1.2/200 3/32 Ф2.4 2.4 1.2 0.25±0.05 1.2/200
1/8 Ф3.2 3.2 1.6 0.25±0.05 1.2/200 1/8 Ф3.2 3.2 1.6 0.25±0.05 1.2/200
3/16 Ф4.8 4.8 2.4 0.25±0.05 1.2/200 3/16 Ф4.8 4.8 2.4 0.25±0.05 1.2/200
1/4 Ф6.4 6.4 3.2 0.30±0.08 1.2/200 1/4 Ф6.4 6.4 3.2 0.30±0.08 1.2/200
3/8 Ф9.5 9.5 4.8 0.30±0.08 1.2/200 3/8 Ф9.5 9.5 4.8 0.30±0.08 1.2/200
1/2 Ф12.7 12.7 6.4 0.30±0.08 1.2/200 1/2 Ф12.7 12.7 6.4 0.30±0.08 1.2/200
3/4 Ф19.1 19.1 9.5 0.43±0.08 1.2/50 3/4 Ф19.1 19.1 9.5 0.43±0.08 1.2/50
1 Ф25.4 25.4 12.7 0.48±0.08 1.2/50 1 Ф25.4 25.4 12.7 0.48±0.08 1.2/50
1 1/2 Ф38.1 38.1 19.1 0.51±0.08 1.2/50 1 1/2 Ф38.1 38.1 19.1 0.51±0.08 1.2
2 Ф50.8 50.8 25.4 0.58±0.08 1.2/50 2 Ф50.8 50.8 25.4 0.58±0.08 1.2
Other sizes are available upon request. Standard color: Clear, Black, other colors are available upon request. Other sizes are available upon request. Standard color: Clear, Black, other colors are available upon request.
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-HFT(5000) is flexible, braided cloth fiber tube designed primarily to provide outstanding mechanical abrasion It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation
protection for components such as rubber hoses, plastic pipes and harness wiring bundles. Also suitable for noise and and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
rattle suppression.Ideal for application in auto hose, wire harness, automatic equipment, railway, general manufacturing Technical Data
industry where wire and cable are required to has a tough and durable protection.
Property Test method Typical data
Outside Insulation Jacket Property
Technical Data Tensile Strength(Mpa) ASTM D2671 ≥10.4
Elongation(%) ASTM D2671 ≥300
Item Test condition Specifications Density(g/cm3) ASTM D792 1.2
Longitudinal change(%) UL 224 ≤±10
23℃ No wear to underlying rubber hose Elongation after aging(%) UL224 158ºċX168hrs ≥200
Abrasion resistance 200g load, 144 000 cycles 80℃ No wear to underlying rubber hose Heat shock UL224 225ºċX4hrs No cracking
Dielectric strength(kv/mm) IEC 243 ≥20
125℃ No wear to underlying rubber hose Volume resistivity(Ω.cm) IEC93 ≥1014
Cooper stability ASTM D 2671 pass
Thermal ageing 3000 hrs at 125℃ No deterioratioin in abrasion resistance at 80℃ Water absorption(%) ASTM-D570 ≤0.5
Low temperature flexibility 4 hrs at -40℃, 10X diameter mandrel No cracking Hot Melting Adhesive Property
Water absorptivity ASTM D570 ≤0.2%
Cold impact 200g weight from 100mm at -40℃ No cracking Softening Point ASTM E28 95℃
Peel Strength(PE) ASTM D1000 120N/25mm
Thermal shock 100cycles between -40℃ and 125℃ No deterioratioin in abrasion resistance at 80℃ Peel strength(AL) ASTM D1000 80N/25mm
Fluid resistance 24 hrs immersion at 23℃ No deterioratioin in abrasion resistance at 80℃
Size:
Size: Size
As supplied(mm) After recovered(mm) Standard packing
Inside diameter Wall thickness Inside diameter Wall thickness (m/pc)
Size ID as supplied (mm) ID after recovery (mm) Packing (M/Roll)
HP-MWT-8/2 8 0.70±0.20 2 1.7 1.22
HP-HFT(5000)-12/6 ≥12 ≤6 100 HP-MWT-12/3 12 0.80±0.20 3 2.0 1.22
HP-MWT-16/5 16 0.80±0.20 5 2.2 1.22
HP-HFT(5000)-20/10 ≥20 ≤10 50
HP-MWT-22/6 22 0.90±0.20 6 2.5 1.22
HP-HFT(5000)-25/12.5 ≥25 ≤12.5 50
HP-MWT-28/6 28 0.90±0.20 6 2.5 1.22
HP-HFT(5000)-30/15 ≥30 ≤15 50 HP-MWT-33/8 33 0.90±0.20 8 2.7 1.22
HP-HFT(5000)-35/17.5 ≥35 ≤17.5 50 HP-MWT-40/12 40 0.90±0.20 12 2.7 1.22
HP-MWT-55/16 55 0.90±0.20 16 2.7 1.22
HP-HFT(5000)-40/20 ≥40 ≤20 50
HP-MWT-65/19 65 0.90±0.20 19 2.8 1.22
HP-HFT(5000)-50/25 ≥50 ≤25 50 HP-MWT-75/22 75 1.00±0.25 22 3.0 1.22
HP-HFT(5000)-60/30 ≥60 ≤30 50 HP-MWT-85/25 85 1.00±0.25 25 3.0 1.22
HP-MWT-95/25 95 1.00±0.25 25 3.0 1.22
HP-HFT(5000)-70/35 ≥70 ≤35 50
HP-MWT-115/34 115 1.00±0.25 34 3.0 1.22
HP-HFT(5000)-80/40 ≥80 ≤40 50
HP-MWT-140/42 140 1.00±0.25 42 3.0 1.22
Wall thickness includes adhesive thickness. Standard color: Black HP-MWT-160/50 160 1.00±0.25 50 3.0 1.22
Other sizes are available upon request.
HP-MWT-175/58 180 1.00±0.25 58 3.0 1.22
HP-MWT-205/65 205 1.00±0.25 65 3.0 1.22
Other sizes are available upon request. Standard color: Black, other colors are available upon request.
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation ● Suitable for indoor & outdoor applications
and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors. ● Ideal for external insulation and protection of power cable termination
Technical Data
Technical Data
Property Test method Typical data
Property Test method Typical data
Property of Jacket
Tensile strength ASTM D 2671 ≥20 MPa
Tensile strength ASTM D2671 ≥14MPa
Breakdown elongation ASTM D 2671 ≥450%
Elongation at break ASTM D2671 ≥400%
Tensile strength ASTM D 2671 ≥16 MPa
Elongation at break after aging D2671/150℃ ≥300%
Breakdown elongation ASTM D 2671 ≥360%
Density ASTM D792 1.05g/cm3
Water absorptioin(23℃/336hrs) ASTM D 570 ≤0.5%
Eccentricity ASTM D 2671 ≤30%
Density ASTM D 2671 1.10~1.20
Longitudinal shrinkage UL224 0 to 10%
Low temperature flexibility(-40℃/4hrs) ASTM D 2671 No cracking
Dielectric strength IEC243 ≥20KV/mm
Heat shock(250℃/30mins) ASTM D 2671 No drop, No flow, No cracking
Volume resistivity IEC93 ≥1014 Ω•cm
Thermal endurance IEC 216 105℃
Cooper stability ASTM D 2671 pass
CI:900ppm max.Br:900ppm max.
Water absorption 14days ≤0.15% Halogen free IEC 61249-2-21 Total(Cl+Br):1500ppm max.
Property of Adhesive Volume resistivity ASTM D2671 ≥1013Ω•cm
Water absorptivity ISO 62 <0.2% Dielectric strength(in insulation oil) ASTM D2671 ≥15KV/mm.
Softening Point ASTM-E28 85℃ After 1hr at 2.5kV
Peel Strength(PE) DIN 30672 4N/cm and 1hr at 2.75kV
Copper stability ASTM D2671 Non-corrosive Tracking and erosion resistance ASTM D2303
and 1hr at 3.00kV
Resistance to fungus and decay ISO 846 pass and 20mins at 3.25kV Pass
Flammability ASTM D2863 OI≥25
Compare between exposed
Size:
Color fastness to light IEC 60684-3 and unexposed parts
As supplied(mm) After recovered(mm) Standard packing the color does not change
Size
Inside diameter Wall thickness Inside diameter Wall thickness (m/pc)
Size:
HP-HWT-9/3 9 0.90±0.20 3 1.8 1.22
HP-HWT-13/4 13 0.90±0.20 4 2.4 1.22 Size As supplied (mm) After recovered(mm) Standard packing
HP-HWT-22/6 22 1.0±0.20 6 2.7 1.22 inch ID ID Thickness ( m/pc, m/roll)
HP-HWT-205/60 205 1.3±0.30 60 4.3 1.22 Other sizes are available upon request. Standard color: Red, Black.
Other sizes are available upon request. Standard color: Black, other colors are available upon request.
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Stress control tube controls the electrical stress at the end of the copper screen. Without stress control tube if the Semi-conductive tube is used in Cable Joints upto 36 KV to provide insulation screen on the build-up insulation over
copper screen is cut and removed from the terminal section with no further precautions taken, the electrical field is connectors. The Semi Conductive Tubing is made from thermally stabilize cross linked semi-conductive Polymeric
concentrated on the end of the copper screen, causing electrical breakdown. With stress control tube when a stress material.
control tube with a high dielectric constant is installed, it disperses the electrical field at the end of the insulation screen.
Technical Data
Technical Data
Property Test Methods Typical Data
Property Test Methods Typical Data
Tensile strength ASTM D 412 ≥10MPa
Tensile strength ASTM D 412 ≥11MPa Elongation at break ASTM D 412 300%
Elongation at break ASTM D 412 300% Volume resistance ASTM D 257 ≤1.0 x 103 Ω.cm
HP-SCT-40/18 ≥40 1.1 ≤18 2.5±0.25 HP-SCIT-65/25 ≥65 3.3 ≤25 6.5±0.5
HP-SCT-50/20 ≥50 1.2 ≤20 2.5±0.25 HP-SCIT-77/30 ≥77 3.3 ≤30 6.5±0.5
136℃/168h break down elongation after aging ASTM D2671 ≥400% HP-BBT-10-210/84 ≥210 1.1±0.3 84 3.0±0.2
Oxygen index ASTM D2863 ≥27 Other Size and wall thickness is available as customer’s order. The standard color is Red
We can pack according to customer’s requests.
Dielectric strength ASTM D2671 ≥15kV/mm
Characteristics
Dual Wall Tubing
HP-DW Semi-flexible Heat Shrink Dual wall tubing with is manufactured by co-extrusion of irradiated cross-linking 3:1
polyolefin and hot-melt adhesive. This tubing may be used in a wide variety of electrical applications, including back Φ2.4/0.8 2.4 0.8 1.00±0.28 0.3 1.22/200
end connector sealing, breakouts, and connector-to-cable transitions. High expansion ratio makes it possible to repair
most damaged cable jackets without removing connectors. HP-DW is anti rodent sleeve, it can protect cable from rat. Φ3/1 3 1 1.00±0.28 0.3 1.22/200
This product is UL listed under file number E361230. Φ4.8/1.6 4.8 1.6 1.00±0.28 0.3 1.22/100
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5% Φ12.7/4.2 12 4 1.78±0.38 0.53 1.22/ 50
Heat shock No crack ASTM D 2671 No crack Φ39/13 39 13 2.54±0.55 0.76 1.22/ 25
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown Φ4/1 4 1 1.00±0.28 0.3 1.22/100
Characteristics
Dual Wall Tubing
HP-DW-AT Semi-flexible Heat Shrink Dual wall tubing with is manufactured by co-extrusion of irradiated cross-linking 3:1
polyolefin and more hot-melt adhesive. This tubing may be used in a wide variety of electrical applications, including Φ2.4/0.8 2.4 0.8 1.00±0.28 0.40~0.50 1.22/200
back end connector sealing, breakouts, and connector-to-cable transitions. High expansion ratio makes it possible to
repair most damaged cable jackets without removing connectors. HP-DW-AT is anti rodent sleeve, it can protect cable Φ3/1 3 1 1.00±0.28 0.40~0.50 1.22/200
from rat. This product is UL listed under file number E361230. Φ4.8/1.6 4.8 1.6 1.00±0.28 0.40~0.50 1.22/100
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5% Φ12.7/4.2 12.7 4.2 1.78±0.38 0.60~0.70 1.22/ 50
Heat shock No crack ASTM D 2671 No crack Φ39/13 39 13 2.54±0.55 0.90~1.00 1.22/ 25
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown Φ4/1 4 1 1.00±0.28 0.40~0.50 1.22/100
Characteristics Characteristics
Dual Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-DW(06) is manufactured by co-extrusion of irradiated cross-linking polyolefin and specifically designed hot melt HP-DW(N06) is manufactured by co-extrusion of irradiated cross-linking Nylon and specifically designed hot melt
adhesive. It has excellent tensile strength, puncture resistance and waterproof properties. Specially designed for adhesive. It is high transparency heat shrinkable tube and has more excellent tensile strength, puncture resistance and
environmental sealing and protection of crimp splices and terminations. This product is UL listed under file number waterproof properties compared with HP-DS(06). Specially designed for environmental sealing and protection of crimp
E361230. splices and terminations. This product is UL listed under file number E361230.
Tensile strength(Room temp.) Min. 16Mpa -ISO37 17.2Mpa Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Elongation at break (Room temp.) Min. 200% ISO37 280% Elongation at break (Room temp.) Min. 200% ISO37 450%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 200% Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Withstand 2.5 KV for 1minute and breakdown Withstand 2.5 KV for 1minute and breakdown
Voltage withstand (Aged) UL224 Pass Voltage withstand (Aged) UL224 Pass
at least half of un-aged breakdown voltage at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Size: Size:
Part As supplied(mm) After recovered (mm) Standard Package Part As supplied(mm) After recovered (mm) Standard Package
Color Color
Number (m/roll) Number (m/roll)
I.D. W.T. I.D.(max) W.T. I.D. W.T. I.D.(max) W.T.
HP-DW(06)-3.2/1.0 Yellow / Clear Ф3.2±0.3 0.35±0.05 Ф1.0 1.0±0.1 100 HP-DW(N06)-3.2/1.0 Clear Ф3.2±0.3 0.35±0.05 Ф1.0 1.0±0.1 100
HP-DW(06)-4.8/1.6 Red Ф4.8±0.3 0.45±0.05 Ф1.4 1.1±0.1 100 HP-DW(N06)-4.8/1.6 Red Ф4.8±0.3 0.45±0.05 Ф1.4 1.1±0.1 100
HP-DW(06)-5.3/1.6 Red Ф5.3±0.3 0.50±0.05 Ф1.6 1.3±0.1 100 HP-DW(N06)-5.3/1.6 Red Ф5.3±0.3 0.50±0.05 Ф1.6 1.3±0.1 100
HP-DW(06)-6.2/2.0 Red Ф6.2±0.3 0.50±0.05 Ф2.0 1.3±0.1 100 HP-DW(N06)-6.2/2.0 Red Ф6.2±0.3 0.50±0.05 Ф2.0 1.3±0.1 100
HP-DW(06)-5.8/1.9 Blue Ф5.8±0.3 0.45±0.05 Ф1.7 1.2±0.1 100 HP-DW(N06)-5.8/1.9 Blue Ф5.8±0.3 0.45±0.05 Ф1.7 1.2±0.1 100
HP-DW(06)-6.2/2.0 Blue Ф6.2±0.3 0.55±0.05 Ф2.0 1.4±0.1 100 HP-DW(N06)-6.2/2.0 Blue Ф6.2±0.3 0.55±0.05 Ф2.0 1.4±0.1 100
HP-DW(06)-6.8/2.2 Yellow Ф6.8±0.3 0.5±0.05 Ф2.1 1.4±0.1 100 HP-DW(N06)-6.8/2.2 Yellow Ф6.8±0.3 0.5±0.05 Ф2.1 1.4±0.1 100
HP-DW(06)-7.0/2.5 Yellow Ф7.0±0.3 0.5±0.05 Ф2.5 1.5±0.1 100 HP-DW(N06)-7.0/2.5 Yellow Ф7.0±0.3 0.5±0.05 Ф2.5 1.5±0.1 100
HP-DW(06)-8.3/3.0 Yellow Ф8.3±0.3 0.65±0.05 Ф3.0 1.65±0.1 100 HP-DW(N06)-8.3/3.0 Yellow Ф8.3±0.3 0.65±0.05 Ф3.0 1.65±0.1 100
Other sizes are available upon request. Standard color: Clear / Red / Blue / Yellow Other sizes are available upon request. Standard color: Clear / Red / Blue / Yellow
Characteristics Characteristics
Dual Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation
insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors. and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
Technical Data
Technical Data
Property Test method Typical data
Property Test method Typical data
Outside Insulation Jacket Property
Outside Insulation Jacket Property Tensile Strength(Mpa) ASTM D2671 ≥10.4
Tensile Strength(Mpa) ASTM D2671 ≥10.4 Elongation(%) ASTM D2671 ≥300
Elongation(%) ASTM D2671 ≥300 Density(g/cm3) ASTM D792 1.2
Density(g/cm3) ASTM D792 1.2 Longitudinal change(%) UL 224 ≤±10
Longitudinal change(%) UL 224 ≤±10 Elongation after aging(%) UL224 158ºċX168hrs ≥200
Elongation after aging(%) UL224 158ºċX168hrs ≥200 Heat shock UL224 225ºċX4hrs No cracking
Heat shock UL224 225ºċX4hrs No cracking Dielectric strength(kv/mm) IEC 243 ≥20
Dielectric strength(kv/mm) IEC 243 ≥20 Volume resistivity(Ω.cm) IEC93 ≥1014
Volume resistivity(Ω.cm) IEC93 ≥1014 Cooper stability ASTM D 2671 pass
Water absorption(%) ASTM-D570 ≤0.5
Cooper stability ASTM D 2671 pass
Hot Melting Adhesive Property
Water absorption(%) ASTM-D570 ≤0.5
Water absorptivity ASTM D570 ≤0.2%
Hot Melting Adhesive Property
Softening Point ASTM E28 95℃
Water absorptivity ASTM D570 ≤0.2%
Peel Strength(PE) ASTM D1000 120N/25mm
Softening Point ASTM E28 95℃ Peel strength(AL) ASTM D1000 80N/25mm
Peel Strength(PE) ASTM D1000 120N/25mm
Peel strength(AL) ASTM D1000 80N/25mm Size:
Size: Size
As supplied(mm) After recovered(mm) Standard packing
Inside diameter Wall thickness Inside diameter Wall thickness (m/pc)
Part As supplied(mm) After recovered(mm) Standard packing
Number (m/pc) HP-MWTA(PA)-8/2 8 0.70±0.20 2 1.7 1.22
Inside diameter Wall thickness Inside diameter Wall thickness
HP-MWTA(PA)-12/3 12 0.80±0.20 3 2.0 1.22
HP-MWTA-8/2 8 0.70±0.20 2 1.7 1.22
HP-MWTA(PA)-16/5 16 0.80±0.20 5 2.2 1.22
HP-MWTA-12/3 12 0.80±0.20 3 2.0 1.22
HP-MWTA-16/5 16 0.80±0.20 5 2.2 1.22 HP-MWTA(PA)-22/6 22 0.90±0.20 6 2.5 1.22
HP-MWTA-22/6 22 0.90±0.20 6 2.5 1.22 HP-MWTA(PA)-28/6 28 0.90±0.20 6 2.5 1.22
HP-MWTA-28/6 28 0.90±0.20 6 2.5 1.22 HP-MWTA(PA)-33/8 33 0.90±0.20 8 2.7 1.22
HP-MWTA-33/8 33 0.90±0.20 8 2.7 1.22 HP-MWTA(PA)-40/12 40 0.90±0.20 12 2.7 1.22
HP-MWTA-40/12 40 0.90±0.20 12 2.7 1.22 HP-MWTA(PA)-55/16 55 0.90±0.20 16 2.7 1.22
HP-MWTA-55/16 55 0.90±0.20 16 2.7 1.22 HP-MWTA(PA)-65/19 65 0.90±0.20 19 2.8 1.22
HP-MWTA-65/19 65 0.90±0.20 19 2.8 1.22 HP-MWTA(PA)-75/22 75 1.00±0.25 22 3.0 1.22
HP-MWTA-75/22 75 1.00±0.25 22 3.0 1.22 HP-MWTA(PA)-85/25 85 1.00±0.25 25 3.0 1.22
HP-MWTA-85/25 85 1.00±0.25 25 3.0 1.22
HP-MWTA(PA)-95/25 95 1.00±0.25 25 3.0 1.22
HP-MWTA-95/25 95 1.00±0.25 25 3.0 1.22
HP-MWTA(PA)-115/34 115 1.00±0.25 34 3.0 1.22
HP-MWTA-115/34 115 1.00±0.25 34 3.0 1.22
HP-MWTA(PA)-140/42 140 1.00±0.25 42 3.0 1.22
HP-MWTA-140/42 140 1.00±0.25 42 3.0 1.22
HP-MWTA(PA)-160/50 160 1.00±0.25 50 3.0 1.22
HP-MWTA-160/50 160 1.00±0.25 50 3.0 1.22
HP-MWTA-175/58 180 1.00±0.25 58 3.0 1.22 HP-MWTA(PA)-175/58 180 1.00±0.25 58 3.0 1.22
HP-MWTA-205/65 205 1.00±0.25 65 3.0 1.22 HP-MWTA(PA)-205/65 205 1.00±0.25 65 3.0 1.22
Other sizes are available upon request. Standard color: Black, other colors are available upon request. Other sizes are available upon request. Standard color: Black, other colors are available upon request.
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
It is designed especially ideal for outdoor electrical equipment and connections in wet and underground environments It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical
such as marine vessels, off-shore oil platforms, shipyard and harbor applications. 3:1 shrink ratio allows it easily fit over insulation and water proof are required. Especially for high temperature protection. 3:1 shrink ratio allows it easily fit
irregular shape and large connectors. over irregular shape and large connectors.
Technical Data Technical Data
Property Test method Typical data Property Test method Typical data
Outside Insulation Jacket Property Outside Insulation Jacket Property
Tensile Strength(Mpa) ASTM D2671 ≥10.4 Tensile Strength(Mpa) ASTM D2671 ≥10.4
Elongation(%) ASTM D2671 ≥300 Elongation(%) ASTM D2671 ≥300
Density(g/cm3) ASTM D792 1.2 Density(g/cm3) ASTM D792 1.2
Longitudinal change(%) UL 224 ≤±10 Longitudinal change(%) UL 224 ≤±10
Elongation after aging(%) UL224 158ºċX168hrs ≥200 Elongation after aging(%) UL224 158ºċX168hrs ≥200
Heat shock UL224 225ºċX4hrs No cracking Heat shock UL224 225ºċX4hrs No cracking
Dielectric strength(kv/mm) IEC 243 ≥20 Dielectric strength(kv/mm) IEC 243 ≥20
Volume resistivity(Ω.cm) IEC93 ≥1014 Volume resistivity(Ω.cm) IEC93 ≥1014
Cooper stability ASTM D 2671 pass Cooper stability ASTM D 2671 pass
Water absorption(%) ASTM-D570 ≤0.5 Water absorption(%) ASTM-D570 ≤0.5
Hot Melting Adhesive Property Hot Melting Adhesive Property
Water absorptivity ASTM D570 ≤0.2% Water absorptivity ASTM D570 ≤0.2%
Softening Point ASTM E28 95℃ Softening Point ASTM E28 95℃
Peel Strength(PE) ASTM D1000 120N/25mm Peel Strength(PE) ASTM D1000 120N/25mm
Peel strength(AL) ASTM D1000 80N/25mm Peel strength(AL) ASTM D1000 80N/25mm
Size: Size:
As supplied(mm) After recovered(mm) Standard packing As supplied(mm) After recovered(mm) Standard packing
Size Size
Inside diameter Wall thickness Inside diameter Wall thickness (m/pc) Inside diameter Wall thickness Inside diameter Wall thickness (m/pc)
HP-MWTA(FR)-8/2 8 0.70±0.20 2 1.7 1.22 HP-MWTA(HR)-8/2 8 0.70±0.20 2 1.7 1.22
HP-MWTA(FR)-12/3 12 0.80±0.20 3 2.0 1.22 HP-MWTA(HR)-12/3 12 0.80±0.20 3 2.0 1.22
HP-MWTA(FR)-16/5 16 0.80±0.20 5 2.2 1.22 HP-MWTA(HR)-16/5 16 0.80±0.20 5 2.2 1.22
HP-MWTA(FR)-22/6 22 0.90±0.20 6 2.5 1.22 HP-MWTA(HR)-22/6 22 0.90±0.20 6 2.5 1.22
HP-MWTA(FR)-28/6 28 0.90±0.20 6 2.5 1.22 HP-MWTA(HR)-28/6 28 0.90±0.20 6 2.5 1.22
HP-MWTA(FR)-33/8 33 0.90±0.20 8 2.7 1.22 HP-MWTA(HR)-33/8 33 0.90±0.20 8 2.7 1.22
HP-MWTA(FR)-40/12 40 0.90±0.20 12 2.7 1.22 HP-MWTA(HR)-40/12 40 0.90±0.20 12 2.7 1.22
HP-MWTA(FR)-55/16 55 0.90±0.20 16 2.7 1.22 HP-MWTA(HR)-55/16 55 0.90±0.20 16 2.7 1.22
HP-MWTA(FR)-65/19 65 0.90±0.20 19 2.8 1.22 HP-MWTA(HR)-65/19 65 0.90±0.20 19 2.8 1.22
HP-MWTA(FR)-75/22 75 1.00±0.25 22 3.0 1.22 HP-MWTA(HR)-75/22 75 1.00±0.25 22 3.0 1.22
HP-MWTA(FR)-85/25 85 1.00±0.25 25 3.0 1.22 HP-MWTA(HR)-85/25 85 1.00±0.25 25 3.0 1.22
HP-MWTA(FR)-95/25 95 1.00±0.25 25 3.0 1.22 HP-MWTA(HR)-95/25 95 1.00±0.25 25 3.0 1.22
HP-MWTA(FR)-115/34 115 1.00±0.25 34 3.0 1.22 HP-MWTA(HR)-115/34 115 1.00±0.25 34 3.0 1.22
HP-MWTA(FR)-140/42 140 1.00±0.25 42 3.0 1.22 HP-MWTA(HR)-140/42 140 1.00±0.25 42 3.0 1.22
HP-MWTA(FR)-160/50 160 1.00±0.25 50 3.0 1.22 HP-MWTA(HR)-160/50 160 1.00±0.25 50 3.0 1.22
HP-MWTA(FR)-175/58 180 1.00±0.25 58 3.0 1.22 HP-MWTA(HR)-175/58 180 1.00±0.25 58 3.0 1.22
HP-MWTA(FR)-205/65 205 1.00±0.25 65 3.0 1.22 HP-MWTA(HR)-205/65 205 1.00±0.25 65 3.0 1.22
Other sizes are available upon request. Standard color: Black, other colors are available upon request. Other sizes are available upon request. Standard color: Black, other colors are available upon request.
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-MWTA(M) is mastic lined heat shrinkable tubing, designed specially for protecting metal pipe's joint, soil nails and It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical
other connectors requiring environmental sealing. insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
Characteristics Characteristics
Single Wall Tubing
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Heavy Wall Heat Shrinkable Tubing High Shrink Ratios 6:1 is designed for applications to seal and protect electrical splices, Heat shrinkable Semi-Conductive Insulation Tubing is dual wall heat shrinkable tubing which inner layer is made from
cable terminations and joints where electrical insulation and water proof are required. Ideal for applications to extremely insulation material to provide high insulation and external layer is made from semi-conductive materials to provide
different diameter cables connectors and components. The very high shrink ratio provides closely fit to a wide variety of electric shielding. The tubing manufactured with special technology, is very suitable for applications in power cable
irregular profile connector and figuration. joints up to 36kV.
Size
Characteristics Type
Non-Shrink Tubing
Non-Shrink Tubing
ID(MM) WT(MM)
● Material: PVC
● Shrink ratio: 2:1 HP-PVC 2.0±0.15 0.50±0.10
● Operating range : -50℃--+105℃ HP-PVC 2.5±0.15 0.50±0.10
● Flammability : VW-1
HP-PVC 3.0±0.15 0.50±0.10
● Standard color: Black / Clear
● UL, RoHs, Halogen Free HP-PVC 3.5±0.15 0.50±0.10
electronics, terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed HP-PVC 9.0±0.15 0.50±0.10
under file number E361230 for all colors except clear. Ideal for application in wire harness, automatic equipment,
HP-PVC 10.0±0.15 0.50±0.10
railway, general manufacturing industry where wire and cable are required to has a protection.
HP-PVC 11.0±0.15 0.50±0.10
Technical Data
HP-PVC 12.0±0.15 0.50±0.10
Property Test Methods Typical data Result
HP-PVC 13.0±0.15 0.50±0.10
Temperature Rating UL224 105℃
HP-PVC 14.0±0.15 0.50±0.10
Longitudinal Change ASTM D2671 -5%--+5% -3%
HP-PVC 15.0±0.15 0.50±0.10
Tensile strength ASTM D638 ≥10.4MPa 14.0MPa
HP-PVC 16.0±0.15 0.7±0.15
Tensile Strength after Aging ASTM D638 ≥7.3MPa 9.3MPa HP-PVC 18.0±0.15 0.75±0.15
Elongation at break after Aging ASTM D638 ≥100% 200% HP-PVC 19.0±0.15 0.75±0.15
Other Size and wall thickness is available as customer’s order. Standard color are black and clear, other colors are available as
customer’s requirements.
Non-Shrink Tubing
7000V 7000V (m/roll)
High temperature resistant (200℃) (mm) 1500V 2500V 4000V
● Fiberglass Inside Fiberglass outside
● Flame-Retardant: VW-1
HP-FGS 1.0 1.0+0.20/-0 0.25±0.05 0.25±0.05 0.30±0.05 0.35±0.05 0.50±0.05 200
● Good mechanical properties
● Good flexibility HP-FGS 1.5 1.5+0.20/-0 0.25±0.05 0.25±0.05 0.35±0.05 0.40±0.05 0.50±0.05 200
Technical Data HP-FGS 5.5 5.5+0.5/-0.1 0.35±0.05 0.35±0.05 0.50±0.05 0.55±0.05 1.00±0.1 100
Property Typical data HP-FGS 6.0 6.0+0.5/-0.1 0.35±0.05 0.35±0.05 0.50±0.05 0.60±0.05 1.00±0.1 100
Continuous Operating Temperature -60℃+200℃ HP-FGS 7.0 7.0+0.6/-0.1 0.35±0.05 0.35±0.05 0.50±0.05 0.65±0.05 1.00±0.1 100
Submerge Water Test Not gum, not distortion and emolliated HP-FGS 16.0 16+0.6/-0.2 0.40±0.05 0.45±0.05 0.60±0.05 0.70±0.05 1.20±0.15 50
Other sizes are available upon request. Standard color: Black, White.
Characteristics Characteristics
Non-Shrink Tubing
Non-Shrink Tubing
● Material: Polyester ● Material: PET(Polyester)
● Operating range : -50℃-+150℃ ● Operating range : -50℃--+150℃
● Melt point: 250±5℃ ● Melt point: 250±5℃
● Flammability : VW-1 ● Flammability : VW-1
● Standard color: Black and grey ● Standard colour: Black
● Certificate: UL, CSA, RoHS, PFOS, REACH, Halogen Free ● Certificate : RoHS, Halogen Free
● Cutting tool: Hot knife ● Cutting tool : hot knife
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-EBS expandable sleeve is flame-retardant and halogen-free. It offers durable abrasion resistance in a wide range of HP-SCS Self Closing Braided Wrap is a non-expandable sleeve woven from monofilament (weft) and multifilament (warp)
industrial applications. The open weave construction allows an easy installation on a bundle of hoses and cables, even if polyester yarns. It provides a lightweight, cost-effective and tough solution for the protection of a wide range of
some with bulky or large connectors. Totally expanded the sleeve can reach at least one point five times than the initial components. Its inherent flexibility allows it to bend, coil and conform to irregular shapes, while its open design allows it to
dimension. Ideal for application in wire harness, automatic equipment, railway, general manufacturing industry where be installed on completed assemblies. Most commonly used over wire harnesses, cable assemblies, flat ribbon cables,
wire and cable are required to has a tough and durable protection. tubes and hoses to provide a tough, durable protection in automotive, automatic equipment,railways and panel boards.
Size:
Drawing
Size Expandable Range Packing
Code No.
mm Min.(mm) Max.(mm) M/Rol
HP-EBS-003 8 1 6 1000
HP-EBS-006 12 3 9 500
HP-EBS-008 16 5 16 350
HP-EBS-010 22 7 19 350
Size:
HP-EBS-012 28 8 24 300
Code No. ID Supplied(mm) Max Bundle Dia.mm Packing(L)
HP-EBS-014 33 9 26 250
HP-SCS-005 5 6 100M/Spool
HP-EBS-016 40 10 28 250
HP-SCS-008 8 9 100M/Spool
HP-EBS-020 55 14 30 200 HP-SCS-010 10 11 100M/Spool
HP-SCS-019 19 20 25M/Spool
HP-EBS-038 85 25 60 150
HP-SCS-025 25 27 25M/Spool
HP-EBS-045 95 35 75 100
HP-SCS-029 29 31 25M/Spool
HP-EBS-050 115 40 80 100
HP-SCS-032 32 34 25M/Spool
HP-EBS-055 140 45 90 100 HP-SCS-038 38 40 25M/Spool
Other Size and wall thickness is available as customer’s order. The standard color is Black and grey.
We can pack according to customer’s requests.
Characteristics Characteristics
Non-Shrink Tubing
Non-Shrink Tubing
● Material: PET(Polyethylene Terephthalate ) ● Material: Polyolefin
● Operating range : -50℃--+150℃ ● Operating range : -30℃--+100℃
● Melt point: 250±5℃ ● Standard color: Black / White
● Flammability : VW-1
● Standard colour: black
● Certificate : RoHS, Halogen Free
● Cutting tool : hot knife
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-SCW Self Closing Braided Wrap is an expandable sleeve woven from monofilament (weft) and multifilament (warp) HP-SWS(Spiral Wrap Sleeve) is halogen-free, flexible, polyolefin sleeve. It is low smoke generating, abrasion resistant
polyester yarns. HP-SCW offers innovative solutions for the protection of breakout areas and provides easy removal when and in case of burning products no dioxin. HP-SWS has excellent electrical and physical properties. It is widely used for
is necessary an inspection or maintenance of cables. The special open structure allows to be installed after other cable protection.
components, for example copper terminals and connectors. A strong resilience protects wires and cables and meanwhile
provides exceptional and flame resistance. It's ideal for application in wire harness, automatic equipment, railways, general
W O
manufacturing industry where wires and tubes need a tough and durable protection.
Drawing
L
25
%
d
Size:
L
Code No. OD(mm) ID(mm) Thickness(mm) Width(mm) Bundle(mm)
Other Size and wall thickness is available as customer’s order. The standard color is Black / White.
We can pack according to customer’s requests.
Non-Shrink Tubing
● Material: PTFE AWG MM S-TYPE T-TYPE L-TYPE S-TYPE T-TYPE L-TYPE
● Operating range : -80~260℃ 30 0.30±0.05 305 305 305
● Flammability : VW-1
28 0.38±0.05 0.23±0.05 0.23±0.05 305 305 305
● Standard color: Clear (other colors are available
according to orders ) 26 0.46±0.05 305 305 305
Characteristics Characteristics
Non-Shrink Tubing
Non-Shrink Tubing
● Material: PP ● Material: Aluminum-Glass Fiber-Aluminum
● Temperature Range: -40°C to 135°C ● Temperature Range: -40°C to 250°C
● Great Shape permanence to heat ● High-temperature resistant,water and oil resistant
● Enormous cold impact strength ● Radial shrinkage
● High Strength ● Opening shape is changeable
● Bending Stabile
● Excellent Chemical Resistance
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Corrugated Tube is flexible, flame-retardant tube. It has excellent electrical and physical properties, including excellent Aluminum Corrugated Tube is widely applied in the field of auto air-condition units, auto cables, power steering devices.
acid fastness and corrosion resistance. It is suitable in automotive electronics, terminal lugs, small electrical parts, lead We are able to design and produce customized heat protection hoses according to your requirements.
wires of toy motors and transformers etc.
Basic information:
Materials
Layers Inner-diameter range Wall thickness range Length range
(from outter to inner)
Aluminum-Glass
3 8.4mm ~ 100mm 1mm ~ 2mm 50mm ~6000mm
Fiber-Aluminum
R
Specification:
ITEMS RATING
POS.
Size: Quality Standard: CB/182009624 001-2009
Other Size and wall thickness is available as customer’s order. The standard color is Black.
We can pack according to customer’s requests.
Characteristics Characteristics
Non-Shrink Tubing
Non-Shrink Tubing
● High Temperature, soft, RoHS approval ● Color: Sleeve can be supplied in colors, striped
● Operate temperature: -50℃-200℃ ● Size: Inside Diameter: 0.026”--2” (0.66-50.8mm)
● Wall Thickness: 0.001”--0.03” (0.0254-0.76mm)
● Length: 0.064”-48” (1.57--1219mm)
+125℃
-55℃ >60° 2:1
Application: Application:
Silicone rubber tubing ideally suited for many automotive, appliance, electrical/electronic, and aerospace custom rubber Mostly used for welding point, contact, loop, transformer, motor, Electrical wire, electric heating component, capacitance,
requirements where high resistance to both high and low temperature extremes are involved telephony relay etc. for temperature resistance and insulation, mechanism protection.
Size:
Water Absorption ASTM D638 1% max, 24hr, immersion @25℃
Size ID Wall thickness Size Inside diameter Wall thickness
Φ0.8 0.8±0.15 0.5±0.1 Φ16 16±0.15 1.0±0.15 Corrosive effect on Copper __ Negligible
Φ1.0 1.0±0.15 0.5±0.1 Φ18 18±0.15 1.0±0.15
Resistance to industrial solvents, transformer
Φ1.5 1.5±0.15 0.5±0.1 Φ20 20±0.15 1.2±0.15 oil, acids, bases, impregnants, varnishes __ Excellent
Φ2.0 2.0±0.15 0.5±0.1 Φ22 22±0.15 1.2±0.15
Φ2.5 2.5±0.15 0.5±0.1 Φ25 25±0.15 1.2±0.15 Resistance to Freon, Fungus and bacteria __ Excellent
Φ3.0 3.0±0.15 0.5±0.1 Φ30 30±0.15 1.2±0.15
Φ3.5 3.5±0.15 0.5±0.1 Φ35 35±0.15 1.2±0.15 Resistance to tear, puncture, abrasion __ Excellent
Φ4.0 4.0±0.15 0.5±0.1 Φ40 40±0.15 1.5±0.15
Φ5.0 5.0±0.15 0.5±0.1 Φ45 45±0.15 1.5±0.15 Peel Strength __ 357 grams/CM(min)
Φ6.0 6.0±0.15 0.5±0.1 Φ50 50±0.15 1.5±0.15
Φ7.0 7.0±0.15 0.7±0.1 Φ55 55±0.15 1.5±0.15 Bending Recovery __ Excellent
Φ8.0 8.0±0.15 0.7±0.1 Φ60 60±0.15 1.5±0.15
Φ9.0 9.0±0.15 0.7±0.1 Φ70 70±0.15 1.5±0.15 Other Size and wall thickness is available as customer’s order. Sleeve can be supplied in colors, striped
Φ10 10±0.15 1.0±0.1 Φ80 80±0.15 1.8±0.15
Φ11 11±0.15 1.0±0.1 Φ90 90±0.15 1.8±0.15
Φ12 12±0.15 1.0±0.1 Φ100 100±0.15 1.8±0.15
Φ13 13±0.15 1.0±0.1 Φ110 110±0.15 1.8±0.15
Φ14 14±0.15 1.0±0.1 Φ120 120±0.15 1.8±0.15
Φ15 15±0.15 1.0±0.1 Φ130 130±0.15 1.8±0.15
Other size and wall thickness are available according to orders. Standard color:Red, Grey, White, Blue, Green, Yellow
Other colors are available upon request.
Characteristics Characteristics
Assorted Plastic Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-ABox(HST)B-170 is Assorted Plastic Box of HP-HST. It is customized minipacking, mainly for MRO (Mainterance HP-ABox(HST)C-170 is Assorted Plastic Box of HP-HST. It is customized minipacking, mainly for MRO (Mainterance
Repairness Operation ) market .HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke Repairness Operation ) market. HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke
generating, abrasion resistant and in case of burning products no dioxin. HP-HST has excellent electrical and physical generating, abrasion resistant and in case of burning products no dioxin. HP-HST has excellent electrical and physical
properties, including excellent acid fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive properties, including excellent acid fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive
electronics, terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed electronics, terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed
under file number E361230. under file number E361230.
No. Part No. Details Color PCS/ Set MM/ PCS M/Set No. Part No. Details Color PCS/ Set MM/ PCS M/Set
1 HP-HST 1.2/0.6 Black 60 100 6 1 HP-HST 1.2/0.6 5*12=60 100 6
2 HP-HST 2.4/1.2 Black 40 100 4 2 HP-HST 2.4/1.2 5*8=40 100 4
3 HP-HST 3.2/1.6 Black 30 100 3 3 HP-HST 3.2/1.6 Red/ Yellow/ 5*6=30 100 3
HP-ABox(HST)B-170 HP-ABox(HST)C-170 Black/ White/
4 HP-HST 4.8/2.4 Black 20 100 2 4 HP-HST 4.8/2.4 5*4=20 100 2
5 HP-HST 6.4/3.2 Black 10 100 1 5 HP-HST 6.4/3.2 Blue 5*2=10 100 1
6 HP-HST 9.5/4.8 Black 10 100 1 6 HP-HST 9.5/4.8 5*2=10 100 1
Total 170 17 Total 170 17
Other sizes are available upon request. Standard color: Black. Other sizes are available upon request. Standard color:White, Black,Red,Blue,Yellow.
Other colors are available upon request. Other colors are available upon request.
Characteristics Characteristics
Assorted Plastic Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-ABox(HST)C-180 is Assorted Plastic Box of HP-HST. It is customized minipacking, mainly for MRO (Mainterance HP-ABox(HST)C-30 is Assorted Plastic Box of HP-HST. It is customized minipacking, mainly for MRO (Mainterance
Repairness Operation ) market .HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke Repairness Operation ) market .HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke
generating, abrasion resistant and in case of burning products no dioxin. HP-HST has excellent electrical and physical generating, abrasion resistant and in case of burning products no dioxin. HP-HST has excellent electrical and physical
properties, including excellent acid fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive properties, including excellent acid fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive
electronics, terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed electronics, terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed
under file number E361230. under file number E361230.
No. Part No. Details Color PCS/ Set MM/ PCS M/Set No. Part No. Details Color PCS/ Set MM/ PCS M/Set
1 HP-HST 1.6/0.8 5*10=60 90 4.5 1 HP-HST 12.7/6.4 Red/ Yellow/ 5*3=15 180 2.7
2 HP-HST 2.4/1.2 5*5=40 90 4.5 2 HP-ABox(HST)C-30 HP-HST 19.1/9.5 Black/ White/ 5*2=10 180 1.8
3 HP-HST 3.2/1.6 Red/ Yellow/ 5*5=25 90 2.25 3 HP-HST 25.4/12.7 5*1=5 180 0.9
Blue
4 HP-ABox(HST)C-180 HP-HST 4.8/2.4 Black/ White/ 5*3=25 90 2.25 Total 30 5.4
5 HP-HST 6.4/3.2 Blue 5*3=15 90 1.35 Other sizes are available upon request. Standard color:White, Black,Red,Blue,Yellow.
6 HP-HST 9.5/4.8 5*3=15 90 1.35 Other colors are available upon request.
Total 180 16.2
Other sizes are available upon request. Standard color:White, Black,Red,Blue,Yellow.
Other colors are available upon request.
Characteristics Characteristics
Assorted Plastic Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-ABox(HST)C-590 is Assorted Plastic Box of HP-HST. It is customized minipacking, mainly for MRO (Mainterance HP-ABox(DW)C-261 is Assorted Plastic Box of HP-DW. It is customized minipacking, mainly for MRO (Mainterance
Repairness Operation ) market .HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke Repairness Operation ) market. HP-DW is manufactured by co-extrusion of irradiated cross-linking polyolefin and hot-melt
generating, abrasion resistant and in case of burning products no dioxin. HP-HST has excellent electrical and physical adhesive. This tubing may be used in a wide variety of electrical applications, including back end connector sealing,
properties, including excellent acid fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive breakouts, and connector-to-cable transitions. High expansion ratio makes it possible to repair most damaged cable
electronics, terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed jackets without removing connectors. HP-DW is anti rodent sleeve, it can protect cable from rat. This product is UL listed
under file number E361230. under file number E361230.
No. Part No. Details Color PCS/ Set MM/ PCS M/Set
1 HP-HST 1.2/0.6 5*20=100 50 5 No. Part No. Details Color PCS/ Set MM/ PCS M/Set
2 HP-HST 1.6/0.8 5*20=100 50 5 1 HP-DW 2.4/0.8 3*30=90 100 9
3 HP-HST 2.4/1.2 5*20=100 100 10 2 HP-DW 3.2/1.1 3*20=60 100 6
4 HP-HST 3.2/1.6 5*20=100 100 10 3 HP-DW 4.8/1.6 3*12=36 100 3.6
Red/ Yellow/ 4 HP-DW 6.4/2.1 3*10=30 100 3
5 HP-HST 4.8/2.4 5*10=50 100 5 Black/ Red/ Clear
HP-ABox(HST)C-590 Black/ White/ 5 HP-DW 9.5/3.2 3*6=18 100 1.8
6 HP-HST 6.4/3.2 5*10=50 100 5 HP-ABox(DW)C-261
Blue 6 HP-DW 12.7/4.2 3*4=12 100 1.2
7 HP-HST 9.5/4.8 5*6=30 100 3
8 HP-HST 12.7/6.4 5*6=30 100 3 7 HP-DW 15.4/5.1 3*2=6 150 0.9
9 HP-HST 19.1/9.5 5*3=15 150 2.25 8 HP-DW 19.1/6.0 3*2=6 150 0.9
10 HP-HST 25.4/12.7 5*3=15 200 3 9 HP-DW 25.4/8.4 3*1=3 150 0.45
Total 590 51.25 Total 261 26.85
Other sizes are available upon request. Standard color:White, Black,Red,Blue,Yellow. Other sizes are available upon request. Standard color:White, Black,Red,Blue,Yellow.
Other colors are available upon request. Other colors are available upon request.
Characteristics Characteristics
Assorted Plastic Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-ABox(DW)B-87 is Assorted Plastic Box of HP-DW. It is customized minipacking, mainly for MRO (Mainterance HP-ABox(DW)C-87 is Assorted Plastic Box of HP-DW. It is customized minipacking, mainly for MRO (Mainterance
Repairness Operation ) market. HP-DW is manufactured by co-extrusion of irradiated cross-linking polyolefin and hot-melt Repairness Operation ) market. HP-DW is manufactured by co-extrusion of irradiated cross-linking polyolefin and hot-melt
adhesive. This tubing may be used in a wide variety of electrical applications, including back end connector sealing, adhesive. This tubing may be used in a wide variety of electrical applications, including back end connector sealing,
breakouts, and connector-to-cable transitions. High expansion ratio makes it possible to repair most damaged cable breakouts, and connector-to-cable transitions. High expansion ratio makes it possible to repair most damaged cable
jackets without removing connectors. HP-DW is anti rodent sleeve, it can protect cable from rat. This product is UL listed jackets without removing connectors. HP-DW is anti rodent sleeve, it can protect cable from rat. This product is UL listed
under file number E361230. under file number E361230.
No. Part No. Details Color PCS/ Set MM/ PCS M/Set No. Part No. Details Color PCS/ Set MM/ PCS M/Set
1 HP-DW(3X) 2.4/0.8 Black 30 100 3 1 HP-DW(3X) 2.4/0.8 3*10=30 100 3
2 HP-DW(3X) 3.2/1.0 Black 21 100 2.1 2 HP-DW(3X) 3.2/1.0 3*7=21 100 2.1
3 HP-DW(3X) 4.8/1.6 Black 15 100 1.5 3 HP-DW(3X) 4.8/1.6 3*5=15 100 1.5
HP-ABox(DW)B-87 HP-ABox(DW)C-87 Blk/Red/Clr
4 HP-DW(3X) 6.4/2.0 Black 12 100 1.2 4 HP-DW(3X) 6.4/2.0 3*4=12 100 1.2
5 HP-DW(3X) 9.5/3.0 Black 6 100 0.6 5 HP-DW(3X) 9.5/3.0 3*2=6 100 0.6
6 HP-DW(3X) 12.7/4.0 Black 3 100 0.3 6 HP-DW(3X) 12.7/4.0 3*1=3 100 0.3
Total 87 8.7 Total 87 8.7
Wall thickness includes adhesive thickness. Standard color: Black Wall thickness includes adhesive thickness. Standard color: Black,Red,Color
Other sizes are available upon request. Other colors are available upon request. Other sizes are available upon request.
Characteristics Characteristics
Assorted Plastic Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-ABox(DS)-142 is Assorted Plastic Box of HP-DS-N. It is customized minipacking, mainly for MRO (Mainterance HP-ABox(DS)-210 is Assorted Plastic Box of HP-DS-N. It is customized minipacking, mainly for MRO (Mainterance
Repairness Operation ) market.The heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from Repairness Operation ) market.The heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from
water and corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and water and corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and
protects electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more protects electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more
reliable than conventional crimp terminals. reliable than conventional crimp terminals.
Technical Data Technical Data
Property Specification Requirements Test Methods Typical Value Property Specification Requirements Test Methods Typical Value
Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Elongation at break (Room temp.) Min. 200% ISO37 450% Elongation at break (Room temp.) Min. 200% ISO37 450%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 220% Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
No. Part No. Details Color PCS/ Set No. Part No. Details Color PCS/ Set
1 HP-DS-NR06R5 Red 7 1 HP-DS-NR06R5 Red 10
2 HP-DS-NR06R6 Red 7 2 HP-DS-NR06R6 Red 10
3 HP-DS-NT06R63E Red 10 3 HP-DS-NT06R63E Red 15
4 HP-DS-NR06R63E Red 10 4 HP-DS-NR06R63E Red 15
5 HP-DS-N06-1.25 Red 20 5 HP-DS-N06-1.25 Red 30
6 HP-DS-NR06B6 Blue 7 6 HP-DS-NR06B6 Blue 10
7 HP-ABox(DS)-142 HP-DS-NR06B8 Blue 7 7 HP-ABox(DS)-210 HP-DS-NR06B8 Blue 10
8 HP-DS-NT06B63E Blue 10 8 HP-DS-NT06B63E Blue 15
9 HP-DS-NR06B63E Blue 10 9 HP-DS-NR06B63E Blue 15
10 HP-DS-N06-2 Blue 20 10 HP-DS-N06-2 Blue 30
11 HP-DS-NR06Y6 Yellow 7 11 HP-DS-NR06Y6 Yellow 10
12 HP-DS-NR06Y8 Yellow 7 12 HP-DS-NR06Y8 Yellow 10
13 HP-DS-N06-5.5 Yellow 20 13 HP-DS-N06-5.5 Yellow 30
Total 142 Total 210
Other sizes are available upon request. Standard color: Red, Blue,Yellow. Other sizes are available upon request. Standard color: Red, Blue,Yellow.
Web:www.hampool.com Skype:shrinkproducts Web:www.hampool.com Skype:shrinkproducts
103 Email:sales@hampool.com info@hampool.com Email:sales@hampool.com info@hampool.com 104
Tel:-86-21-69927651 -86-18016407650 Fax:-86-21-69927652 Tel:-86-21-69927651 -86-18016407650 Fax:-86-21-69927652
HP-ABox(DS)-250 Shrink Terminal HP-ABox(DS)-480 Shrink Terminal
Characteristics Characteristics
Assorted Plastic Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-ABox(DS)-250 is Assorted Plastic Box of HP-DS.It is customized minipacking, mainly for MRO (Mainterance Repairness HP-ABox(DS)-480 is Assorted Plastic Box of HP-DS.It is customized minipacking, mainly for MRO (Mainterance Repairness
Operation ) market.The heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water Operation ) market.The heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water
and corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects and corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects
electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable
than conventional crimp terminals. than conventional crimp terminals.
Technical Data Technical Data
Property Specification Requirements Test Methods Typical Value Property Specification Requirements Test Methods Typical Value
Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa
Elongation at break (Room temp.) Min. 200% ISO37 280% Elongation at break (Room temp.) Min. 200% ISO37 280%
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 200% Elongation after aging(158℃/168hrs) Min.100% ISO37 200%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
at least half of un-aged breakdown voltage at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
No. Part No. Details Color PCS/ Set No. Part No. Details Color PCS/ Set
1 HP-DS-06-1.25 Red 20 1 HP-DS-06-1.25 Red 30
2 HP-DS-06-2 Blue 15 2 HP-DS-06-2 Blue 20
3 HP-DS-06-5.5 Yellow 5 3 HP-DS-06-5.5 Yellow 10
4 HP-DS-R06R4 Red 15 4 HP-DS-R06R4 Red 30
5 HP-DS-R06R6 Red 15 5 HP-DS-R06R6 Red 30
6 HP-DS-R06R8 Red 15 6 HP-DS-R06R8 Red 30
7 HP-DS-R06B4 Blue 10 7 HP-DS-R06B4 Blue 20
8 HP-DS-R06B6 Blue 10 8 HP-DS-R06B6 Blue 20
9 HP-DS-R06B8 Blue 10 9 HP-DS-R06B8 Blue 20
10 HP-DS-R06Y4 Yellow 5 10 HP-DS-R06Y4 Yellow 10
11 HP-DS-R06Y6 Yellow 5 11 HP-DS-R06Y6 Yellow 10
12 HP-ABox(DS)-250 HP-DS-R06Y8 Yellow 5 12 HP-ABox(DS)-480 HP-DS-R06Y8 Yellow 10
13 HP-DS-F06R4 Red 15 13 HP-DS-F06R4 Red 30
14 HP-DS-F06R5 Red 15 14 HP-DS-F06R5 Red 30
15 HP-DS-F06B4 Blue 10 15 HP-DS-F06B4 Blue 20
16 HP-DS-F06B5 Blue 10 16 HP-DS-F06B5 Blue 20
17 HP-DS-F06Y4 Yellow 5 17 HP-DS-F06Y4 Yellow 10
18 HP-DS-F06Y5 Yellow 5 18 HP-DS-F06Y5 Yellow 10
19 HP-DS-T06R63E Red 15 19 HP-DS-T06R63E Red 30
20 HP-DS-P06R63E Red 15 20 HP-DS-P06R63E Red 30
21 HP-DS-T06B63E Blue 10 21 HP-DS-T06B63E Blue 20
22 HP-DS-P06B63E Blue 10 22 HP-DS-P06B63E Blue 20
23 HP-DS-T06Y63E Yellow 5 23 HP-DS-T06Y63E Yellow 10
24 HP-DS-P06Y63E Yellow 5 24 HP-DS-P06Y63E Yellow 10
Total 250 Total 480
Other sizes are available upon request. Standard color: Red, Blue,Yellow. Other sizes are available upon request. Standard color: Red, Blue,Yellow.
Characteristics Characteristics
HP-SST:
-55℃ >60° 2:1
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
Application:
at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg HP-ABox(DS,SST)-150 is Assorted Plastic Box of HP-DS.It is customized minipacking, mainly for MRO (Mainterance
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Repairness Operation ) market.The heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices
Cold bend(-30℃/1hrs) No crack ISO6722 Pass from water and corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
and protects electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass more reliable than conventional crimp terminals.
HP-ABox(DS,SST)-150 is Assorted Plastic Box of HP-SST.It is customized minipacking, mainly for MRO (Mainterance
No. Part No. Details Color PCS/ Set Repairness Operation ) market.Transparent insulation sleeve provides encapsulation,inspect, strain relief, and
1 HP-DS-06-1.25 Red 40 insulation.Pre-fluxed solder provides controlled soldering process.One piece design, it consists of transparent heat
2 HP-DS-06-2 Blue 30
3 HP-DS-06-5.5 Yellow 20 shrinkable sleeve and fluxed solder. Provides insulation and lower the installed cost. Color hot-melt glue on two ends of
4 HP-DS-R06R4 Red 40 heat shrinkable tube, connecting wires to component terminals, such as motor tabs, connector pins, and switch terminals,it
5 HP-DS-R06R6 Red 40 is very convenience to use the exact wire dimension.
6 HP-DS-R06R8 Red 40
7 HP-DS-R06B4 Blue 30
8 HP-DS-R06B6 Blue 30
9 HP-DS-R06B8 Blue 30 HP - ABox (DS,SST) - 150
10 HP-DS-R06Y4 Yellow 20
11 HP-DS-R06Y6 Yellow 20
12 HP-ABox(DS)-720 HP-DS-R06Y8 Yellow 20
13 HP-DS-F06R4 Red 40
14 HP-DS-F06R5 Red 40
15 HP-DS-F06B4 Blue 30
16 HP-DS-F06B5 Blue 30
17 HP-DS-F06Y4 Yellow 20
18 HP-DS-F06Y5 Yellow 20
19 HP-DS-T06R63E Red 40
20 HP-DS-P06R63E Red 40
21 HP-DS-T06B63E Blue 30
22 HP-DS-P06B63E Blue 30
23 HP-DS-T06Y63E Yellow 20
24 HP-DS-P06Y63E Yellow 20
Total 720
Other sizes are available upon request. Standard color: Red, Blue,Yellow.
2 HP-DS-06-2 Blue 30
3 HP-DS-06-5.5 Yellow 15
HP-ABox(DS,SST)-150
4 HP-SST-105-02 Red 30
5 HP-SST-105-03 Blue 30
6 HP-SST-105-04 Yellow 15
Total 150
Other sizes are available upon request. Standard color: Red, Blue,Yellow.
Blister
Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa
● Material: Polyolefin
● Shrink ratio: 2:1
Elongation at break (Room temp.) Min. 200% ISO37 280%
● Operating range : -55℃--+125℃
Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa ● Flammability : VW-1
Elongation after aging(158℃/168hrs) Min.100% ISO37 200% ● Excellent electrical, physical and chemical properties.
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass ● UL, RoHS and REACH compliant.
Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass Application:
HP-Blister(HST)is Blister of HP-HST. It is customized minipacking, mainly for MRO (Mainterance Repairness Operation )
Cold bend(-30℃/1hrs) No crack ISO6722 Pass
market. HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke generating, abrasion resistant
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass and in case of burning products no dioxin. HP-HST has excellent electrical and physical properties, including excellent acid
fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive electronics, terminal lugs, small
Volume resistivity Min. 1014Ω-cm ASTMD2671 Pass electrical parts, lead wires of toy motors and transformers etc. This product is UL listed under file number E361230.
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Technical Data
Property Requirement Test method Typical data
HP-SST:
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5%
Operating temperature -55℃~125℃ Tensile strength 10.4 MPa min. ASTM D 638 ≥12 MPa
Elongation at break 200% min. ASTM D 638 ≥400%
voltage Resistant >600V Tensile strength after ageing (175℃,168hrs) 7.28 MPa min. ASTM D 638 ≥10.4 MPa
Elongation after ageing (175℃,168hrs) 100% min. ASTM D 638 ≥300%
Protection type IP67 Heat shock(250℃,4hrs) No crack ASTM D 2671 No crack
Volume Resistivity (Ω cm) ≥10 15 Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown
Dielectric Strength (KV/mm) ≥25 Dielectric strength 19.7 KV/mm min. ASTM D 2671 ≥25 KV/mm
Volume resistivity 1014 Ω•cm min. ASTM D 876 ≥1014 Ω•cm
Corrosion No corrosion ASTM D 2671 No corrosion
Size:
Flammability VW-1 UL224 pass
No. Part No. Details Color PCS/ Set
1 HP-DS-06-0.5 Yellow 15
HP - Blister (HST)
2 HP-DS-06-1.25 Red 30
3 HP-DS-06-2 Blue 30
4 HP-DS-06-5.5 Yellow 15
HP-ABox(DS,SST)-150
5 HP-SST-105-01 White 15
6 HP-SST-105-02 Red 30
Characteristics Characteristics
Blister
Blister
● Shrink ratio 3:1 ● Shrinkage ratio 2:1
● Excellent conductivity property ● Waterproof for wiring splices
● High transparency,High tensile strength
● Transparent sleeve provides precise inspection
● Excellent stretch and mechanical damage resistance
● High elasticity keeps steady performance ● Easy control soldering process
● Water proof and moisture resistance ● Minimum Shrink Temp. 60℃
● Operating temperature : -45℃ ~ 135℃ ● Minimum Fully Recover Temp.150℃
● Minimum shrink temperature: 60℃
● Fully melt temperature of solder: 138℃
● Minimum fully recovery temperature: 180℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-Blister(DS) is Blister of HP-DS-N.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation ) HP-Blister(SST) is Blister of HP-SST.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation )
market. The heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and corrosion. market. Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides
Providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides
connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable than insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to
conventional crimp terminals. component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire
Technical Data dimension.
HP - Blister (DS)
Characteristics Characteristics
Paper Core
Paper Box
● Material: Polyolefin ● Material: Polyolefin
● Shrink ratio: 2:1 ● Shrink ratio: 2:1
● Operating range : -55℃--+125℃ ● Operating range : -55℃--+125℃
● Flammability : VW-1 ● Flammability : VW-1
● Excellent electrical, physical and chemical properties. ● Excellent electrical, physical and chemical properties.
● UL, RoHS and REACH compliant. ● UL, RoHS and REACH compliant.
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-PCore(HST)B is PaperCore of HP-HST.It is customized minipacking, mainly for MRO (Mainterance Repairness HP-PBox(HST)B is PaperBox of HP-HST.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation )
Operation ) market.HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke generating, market.HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke generating, abrasion resistant
abrasion resistant and in case of burning products no dioxin.HP-HST has excellent electrical and physical properties, and in case of burning products no dioxin. HP-HST has excellent electrical and physical properties, including excellent acid
including excellent acid fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive electronics, fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive electronics, terminal lugs, small
terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed under file electrical parts, lead wires of toy motors and transformers etc. This product is UL listed under file number E361230.
number E361230.
Technical Data
Technical Data
Property Requirement Test method Typical data
Property Requirement Test method Typical data Longitudinal shrinkage ≤10% ASTM D 2671 ≤5%
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5% Tensile strength 10.4 MPa min. ASTM D 638 ≥12 MPa
Tensile strength 10.4 MPa min. ASTM D 638 ≥12 MPa Elongation at break 200% min. ASTM D 638 ≥400%
Elongation at break 200% min. ASTM D 638 ≥400% Tensile strength after ageing (175℃,168hrs) 7.28 MPa min. ASTM D 638 ≥10.4 MPa
Tensile strength after ageing (175℃,168hrs) 7.28 MPa min. ASTM D 638 ≥10.4 MPa Elongation after ageing (175℃,168hrs) 100% min. ASTM D 638 ≥300%
Elongation after ageing (175℃,168hrs) 100% min. ASTM D 638 ≥300% Heat shock(250℃,4hrs) No crack ASTM D 2671 No crack
Heat shock(250℃,4hrs) No crack ASTM D 2671 No crack Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack
Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown Dielectric strength 19.7 KV/mm min. ASTM D 2671 ≥25 KV/mm
Dielectric strength 19.7 KV/mm min. ASTM D 2671 ≥25 KV/mm Volume resistivity 1014 Ω•cm min. ASTM D 876 ≥1014 Ω•cm
Volume resistivity 1014 Ω•cm min. ASTM D 876 ≥1014 Ω•cm Corrosion No corrosion ASTM D 2671 No corrosion
Corrosion No corrosion ASTM D 2671 No corrosion Flammability VW-1 UL224 pass
Flammability VW-1 UL224 pass
No. Part No. Details Color M/Set No. Part No. Details Color M/Box
1 HP-PCore(HST)B-1.2/0.6 HP-HST Φ1.2/0.6 Black 10 1 HP-PBox(HST)B-1.2/0.6 HP-HST 1.2/0.6 Black 15
2 HP-PCore(HST)B-1.6/0.8 HP-HST Φ1.6/0.8 Black 10 2 HP-PBox(HST)B-1.6/0.8 HP-HST 1.6/0.8 Black 15
3 HP-PCore(HST)B-2.4/1.2 HP-HST Φ2.4/1.2 Black 10 1 HP-PBox(HST)B-2.4/1.2 HP-HST 2.4/1.2 Black 15
4 HP-PCore(HST)B-3.2/1.6 HP-HST Φ3.2/1.6 Black 10 2 HP-PBox(HST)B-3.2/1.6 HP-HST 3.2/1.6 Black 15
5 HP-PCore(HST)B-4.8/2.4 HP-HST Φ4.8/2.4 Black 10 3 HP-PBox(HST)B-4.8/2.4 HP-HST 4.8/2.4 Black 12
6 HP-PCore(HST)B-6.4/3.2 HP-HST Φ6.4/3.2 Black 5 4 HP-PBox(HST)B-6.4/3.2 HP-HST 6.4/3.2 Black 12
7 HP-PCore(HST)B-9.5/4.8 HP-HST Φ9.5/4.8 Black 5 5 HP-PBox(HST)B-9.5/4.8 HP-HST -9.5/4.8 Black 8
8 HP-PCore(HST)B-12.7/6.4 HP-HST Φ12.7/6.4 Black 5 6 HP-PBox(HST)B-12.7/6.4 HP-HST 12.7/6.4 Black 8
9 HP-PCore(HST)B-19.1/9.5 HP-HST Φ19.1/9.5 Black 5 7 HP-PBox(HST)B-19.0/9.5 HP-HST 19.0/9.5 Black 5
10 HP-PCore(HST)B-25.4/12.7 HP-HST Φ25.4/12.7 Black 5 8 HP-PBox(HST)B-25.4/12.7 HP-HST 25.4/12.7 Black 5
Other sizes are available upon request. Standard color:White, Black,Red,Blue,Yellow. Other sizes are available upon request. Standard color: Black,White,Red,Blue,Yellow,Clear.
Other colors are available upon request. Other colors are available upon request.
Characteristics Characteristics
Paper Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-PBox(DW)B is PaperBox of HP-DW.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation ) HP-SPBox(DS-06) is shrink terminal packing in Small Plastic Box .It is customized minipacking, mainly for MRO
market.HP-DW is manufactured by co-extrusion of irradiated cross-linking polyolefin and hot-melt adhesive. This tubing may
(Mainterance Repairness Operation ) market. The heat shrinkable tubing made by HDPE or Nylon, with adhesive lining
be used in a wide variety of electrical applications, including back end connector sealing, breakouts, and connector-to-cable
transitions. High expansion ratio makes it possible to repair most damaged cable jackets without removing for protecting splices from water and corrosion. Providing strain relief and against vibration in rugged environments,
connectors.HP-DW is anti rodent sleeve, it can protect cable from rat. This product is UL listed under file number E361230. which excellently insulates and protects electronic connections. It offer long-term performance, easy installation, and a
low installed cost, which is more reliable than conventional crimp terminals.
Technical Data
Property Requirement Test method Typical data
Technical Data
Property Specification Requirements Test Methods Typical Value
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5%
Tensile strength(Room temp.) Min. 16Mpa ISO37 17.2Mpa
Tensile strength 10.3MPa min. ASTM D 638 ≥12 MPa Elongation at break (Room temp.) Min. 200% ISO37 280%
Elongation at break 200% min. ASTM D 638 ≥400% Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 11.5Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 200%
Tensile strength after ageing (158℃,168hrs) 70% of original ASTM D 638 ≥90%
Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Elongation after ageing (158℃,168hrs) 100% min. ASTM D 638 ≥300% Withstand 2.5 KV for 1minute and breakdown
Voltage withstand (Aged) at least half of un-aged breakdown voltage UL224 Pass
Heat shock No crack ASTM D 2671 No crack
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity 1014 Ω•cm min. ASTM D 876 ≥1014 Ω•cm Volume resistivity Min. 1014 Ω.cm ASTMD2671 Pass
Copper corrosion No corrosion ASTM D 2671 No corrosion Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
Flammability AL TUBING FLAME TEST UL224 pass
HP - SPBox (DS)
HP - PBox (DW)
Item No. Part No. Description Color Type & Size Packing(PCS/Box)
HP-SPBox(DS-06/N06) Small Plastic Box of HDPE/Nylon Heat Shrink Terminal
No. Part No. Details Color M/Set 1 HP-SPBox(DS-06/N06)C-30 Clear HP-DS-06/N06-0.5 30
1 HP-PBox(DW)B-3.0/1.0 HP-DW 3.0/1.0 Black 10 2 HP-SPBox(DS-06/N06)R-50 HDPE Shrink Terminal packing Red HP-DS-06/N06-1.25 50
2 HP-PBox(DW)B-6.0/2.0 HP-DW 6.0/2.0 Black 5 in Small Plastic Box
3 HP-SPBox(DS-06/N06)B-50 Blue HP-DS-06/N06-2 50
3 HP-PBox(DW)B-9.0/3.0 HP-DW 9.0/3.0 Black 5 4 HP-SPBox(DS-06/N06)Y-30 Yellow HP-DS-06/N06-5.5 30
4 HP-PBox(DW)B-12.0/4.0 HP-DW 12.0/4.0 Black 5 HP-DS-06/N06-0.5 5
5 HP-PBox(DW)B-18.0/6.0 HP-DW 18.0/6.0 Black 4 HDPE Shrink Terminal Mixed Clear/ Red/ HP-DS-06/N06-1.25 20
5 HP-SPBox(DS-06/N06)M-50
6 HP-PBox(DW)B-24.0/8.0 HP-DW 24.0/8.0 Black 3 packing in Small Plastic Box Blue/ Yellow HP-DS-06/N06-2 20
Wall thickness includes adhesive thickness. Standard color: Black,Red,Clear HP-DS-06/N06-5.5 5
Other sizes are available upon request.
Other sizes are available upon request. Standard color: Clear,Red, Blue,Yellow.
Web:www.hampool.com Skype:shrinkproducts Web:www.hampool.com Skype:shrinkproducts
117 Email:sales@hampool.com info@hampool.com Email:sales@hampool.com info@hampool.com 118
Tel:-86-21-69927651 -86-18016407650 Fax:-86-21-69927652 Tel:-86-21-69927651 -86-18016407650 Fax:-86-21-69927652
HP-SPBox(SST) Shrink Solder Sleeve Color HP-Zbag(DS) Shrink terminal color
Characteristics Characteristics
Small Plastic Box
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-SPBox(SST)Shrink Solder Sleeve Color is shrink solder sleeve packing in small plastic box .It is customized HP-Zbag(DS) is Blue zip bag of HP-DS.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation )
market. The heat shrinkable tubing made by Nylon, with adhesive lining for protecting splices from water and corrosion.
minipacking, mainly for MRO (Mainterance Repairness Operation ) market. Transparent insulation sleeve provides
Providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic
encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides controlled soldering process.One piece connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable than
design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation and lower the installed conventional crimp terminals.
cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to component terminals, such as motor
tabs, connector pins, and switch terminals,it is very convenience to use the exact wire dimension.
Technical Data
Property Specification Requirements Test Methods Typical Value
Technical Data Tensile strength(Room temp.) Min. 16Mpa ISO37 18.5Mpa
Elongation at break (Room temp.) Min. 200% ISO37 450%
Operating temperature -55℃~125℃ Tensile strength after aging(158℃/168hrs) Min.11.5Mpa ISO37 15Mpa
Elongation after aging(158℃/168hrs) Min.100% ISO37 220%
voltage Resistant >600V Voltage withstand(Un-aged) Wifhstand 2.5 KV for 1minute and breakdown UL224 Pass
Voltage withstand (Aged) Withstand 2.5 KV for 1minute and breakdown UL224 Pass
Protection type IP67 at least half of un-aged breakdown voltage
Copper corrosion(158℃/168 hrs) No corrosion of bare copper UL224 No sign of deg
Volume Resistivity (Ω.cm) ≥10 15 Copper stability(158℃/168 hrs) No sign of degradation Min. Elongation 100% UL224 Pass
Cold bend(-30℃/1hrs) No crack ISO6722 Pass
Dielectric Strength (KV/mm) ≥25 Maximum secant modulus(2%) 250Mpa ASTMD882 Pass
Volume resistivity Min. 1014 Ω-cm ASTMD2671 Pass
Heat shock(250℃/4 hrs) No crack ASTMD2671 Pass
HP - SPBox (SST)
HP - Zbag (DS)
Item No. Part No. Description Color Type & Size Packing(PCS/Box)
HP-SPBox(SST-105/200) Small Plastic Box of Shrink Solder Sleeve
No. Supplier's Part No. Description Color Packing(Pcs/Bag)
1 HP-SPBox(SST-105/200)W-30 White HP-SST-105/200-01 30 1 HP-Zbag(DS-06)W-10 Clear 10
Shrink Solder Sleeve HDPE Heat Shrink Butt
2 HP-SPBox(SST-105/200)R-50 Red HP-SST-105/200-02 50 2 HP-Zbag(DS-06)R-10 Red 10
(Non-Rohs/Rohs) Connector packing in
3 HP-SPBox(SST-105/200)B-50 packing in Small Plastic Box Blue HP-SST-105/200-03 50 3 HP-Zbag(DS-06)B-10 Blue Zip Box Blue 10
4 HP-Zbag(DS-06)Y-10 Yellow 10
4 HP-SPBox(SST-105/200)Y-30 Yellow HP-SST-105/200-04 30
1 HP-Zbag(DS-N06)W-10 Clear 10
White HP-SST-105/200-01 5 Nylon Heat Shrink Butt
2 HP-Zbag(DS-N06)R-10 Red 10
Shrink Solder Sleeve Connector packing in
(Non-Rohs/Rohs) Red HP-SST-105/200-02 20 3 HP-Zbag(DS-N06)B-10 Blue Zip Box Blue 10
5 HP-SPBox(SST-105/200)M-50
Mixed packing in Small 4 HP-Zbag(DS-N06)Y-10 Yellow 10
Blue HP-SST-105/200-03 20
Plastic Box (Non-Rohs) Other quantity are available upon request. Standard color: Clear,Red, Blue,Yellow.
Yellow HP-SST-105/200-04 5
Other sizes are available upon request. Standard color: White, Red, Blue,Yellow
● Item 1 : Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin. Other colors are available upon request.
● Item 2: Solder Ring with flux
● Item 3: Glue rings
Characteristics Characteristics
Blue zip bag
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
HP-Zbag(SST)Shrink Solder Sleeve Color is shrink solder sleeve packing in blue zip box.It is customized minipacking, HP-Zbag(HST) is packing in blue zip bag of HP-HST. It is customized minipacking, mainly for MRO (Mainterance Repairness
mainly for MRO (Mainterance Repairness Operation ) market. Transparent insulation sleeve provides encapsulation,inspect, Operation ) market. HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke generating,
strain relief, and insulation.Pre-fluxed solder provides controlled soldering process.One piece design, it consists of abrasion resistant and in case of burning products no dioxin. HP-HST has excellent electrical and physical properties,
transparent heat shrinkable sleeve and fluxed solder. Provides insulation and lower the installed cost. Color hot-melt glue including excellent acid fastness and corrosion resistance. HP-HST is suitable for insulation use in automotive electronics,
on two ends of heat shrinkable tube, connecting wires to component terminals, such as motor tabs, connector pins, and terminal lugs, small electrical parts, lead wires of toy motors and transformers etc. This product is UL listed under file
switch terminals,it is very convenience to use the exact wire dimension. number E361230.
Technical Data Technical Data
Property Requirement Test method Typical data
Operating temperature -55℃~125℃
Longitudinal shrinkage ≤10% ASTM D 2671 ≤5%
voltage Resistant >600V Tensile strength 10.4 MPa min. ASTM D 638 ≥12 MPa
Elongation at break 200% min. ASTM D 638 ≥400%
Protection type IP67
Tensile strength after ageing (175℃,168hrs) 7.28 MPa min. ASTM D 638 ≥10.4 MPa
Volume Resistivity (Ω cm) ≥10 15 Elongation after ageing (175℃,168hrs) 100% min. ASTM D 638 ≥300%
Heat shock(250℃,4hrs) No crack ASTM D 2671 No crack
Dielectric Strength (KV/mm) ≥25 Low-temperature flexibility(-55℃,4hrs) No crack ASTM D 2671 No crack
Dielectric voltage withstand 2500V,60sec, no breakdown ASTM D 2671 No breakdown
Dielectric strength 19.7 KV/mm min. ASTM D 2671 ≥25 KV/mm
HP - Zbag (SST) Volume resistivity 1014 Ω•cm min. ASTM D 876 ≥1014 Ω•cm
Corrosion No corrosion ASTM D 2671 No corrosion
Flammability VW-1 UL224 pass
HP - Zbag (HST)
Item No. Part No. Description Color Type & Size Packing(PCS/Box)
1 HP-ZPBox(SST-105/200)W-30 White HP-SST-105/200-01 10
2 HP-ZPBox(SST-105/200)R-50 Shrink Solder Sleeve Red HP-SST-105/200-02 10
(Non-Rohs/Rohs) HP-Zbag(HST)C50-25 Heat Shrink Thin Wall Tubing(Color) Composition Qty: 25 PCS,1.25M
3 HP-ZPBox(SST-105/200)B-50 packing in Blue Zip Box Blue HP-SST-105/200-03 10
Part No. No. Type and Size Color PCS/ Set MM/ PCS M/Set Zip bag size
4 HP-ZPBox(SST-105/200)Y-30 Yellow HP-SST-105/200-04 10
White HP-SST-105/200-01 3 1 HP-HST Φ3.2/1.6 Black 5 50 0.25
Shrink Solder Sleeve Red HP-SST-105/200-02 10 2 HP-HST Φ4.8/2.4 Blue 5 50 0.25
5 HP-ZPBox(SST-105/200)C-50 (Non-Rohs/Rohs)
Mixed packing in Blue Zip Box Blue HP-SST-105/200-03 9 HP-Zbag(HST)C-25 3 HP-HST Φ6.4/3.2 Red 5 50 0.25
10X13.5
Yellow HP-SST-105/200-04 3 4 HP-HST Φ9.5/4.8 White 5 50 0.25
Other sizes are available upon request. Standard color: White, Red, Blue,Yellow
● Item 1 : Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin. Other colors are available upon request. 5 HP-HST Φ12.7/6.4 Yellow 5 50 0.25
● Item 2: Solder Ring with flux
● Item 3: Glue rings
Total 25 1.25
MM/ PCS
Total 25 12
HP-Zbag(HST)B150-25 Heat Shrink Thin Wall Tubing(Black) Composition Qty: 25 PCS, 3.75M
Part No. No. Type and Size Color PCS/ Set MM/ PCS M/Set Zip bag size
1 HP-HST Φ3.2/1.6 4X5=20 200 4 HP-Zbag(DW)C-25 Heat Shrink Dual Wall Tubing specially for shrink terminal(Color) Composition Qty: 25 PCS, 0.94M
2 HP-HST Φ4.8/2.4 4X5=20 200 4 Part No. No. Type and Size Color PCS/ Set MM/ PCS M/Set Zip bag size
Black/Blue
HP-Zbag(HST)B200-60 3 HP-HST Φ6.4/3.2 /Red/White 2X5=20 200 2 1 HP-DW 4.8/1.6 Red 10 36.5 0.37
/Yellow 15X26
HP-Zbag(DW)C-25 2 HP-DW 5.8/1.9 Blue 10 36.5 0.37
4 HP-HST Φ9.5/4.8 1X5=20 200 1 10X13.5
3 HP-DW 6.8/2.2 Yellow 5 42.5 0.21
5 HP-HST Φ12.7/6.4 1X5=20 200 1
Total 25 0.94
Total 25 12
Other quantity are available upon request. Standard color:White, Black,Red,Blue,Yellow.
Other colors are available upon request.
Part No. No. Type and Size Color PCS/ Set MM/ PCS M/Set Zip bag size
Blue zip bag
Special Products
1 HP-DW Φ2.4/0.8 Black 6 150 0.9
Total 24 3.6
+125℃
-55℃ >60° 2:1
HP-Zbag(DW)C150-24 Heat Shrink Dual Wall Tubing(Color) Composition Qty: 24 PCS, 3.6M
Application:
Part No. No. Type and Size Color PCS/ Set MM/ PCS M/Set Zip bag size
Heat shrinkable end cap lined with hot melt adhesive providing electric insulation, satisfied sealing, water proof and
1 HP-DW Φ2.4/0.8 2X3=6 150 0.9 resistance to chemical corrosion and and abrasion for power cable and telecommunication cables during they are stored,
2 HP-DW Φ-3.2/1.1 2X3=6 150 0.9 transported and installed.
5 HP-DW Φ-9.5/3.2 1X3=6 150 0.45 Tensile strength ASTM D 2671 ≥13 MPa
Tensile strength after thermal aging ASTM D 2671/120℃,168hrs ≥10 MPa
6 HP-DW Φ-12.7/4.2 1X3=6 150 0.45
Ultimate elongation ASTM D 2671 ≥300%
Total 24 3.6 Ultimate elongation after thermal aging ASTM D 2671/120℃,168hrs ≥250%
HP-Zbag(DW)B200-24 Heat Shrink Dual Wall Tubing(Black) Composition Qty: 24 PCS, 3.6M Dielectric strength IEC 243 ≥15KV/mm
Volume resistance IEC 93 ≥1013 Ω .cm
Part No. No. Type and Size Color PCS/ Set MM/ PCS M/Set Zip bag size
Water absorption ISO62 ≤1%
1 HP-DW Φ2.4/0.8 Black 15 200 3
Size:
2 HP-DW Φ-3.2/1.1 Black 15 200 3
Code No ID(mm) Length(mm)
3 HP-DW Φ-4.8/1.6 Black 9 200 1.8
HP-Zbag(DW)B200-24 HP-HSEC105 12/4-40MM 12/4 40
4 HP-DW Φ-6.4/2.1 Black 9 200 1.8 15X26
HP-HSEC110 14/5-45MM 14/5 45
5 HP-DW Φ-9.5/3.2 Black 3 200 0.9 HP-HSEC115 20/6-55MM 20/6 55
6 HP-DW Φ-12.7/4.2 Black 3 200 0.9 HP-HSEC120 25/8.5-68MM 25/8.5 68
Total 24 3.6
Other quantity are available upon request. Standard color: Black,Red,Color
Other colors are available upon request.
Characteristics Characteristics
Special Products
Special Products
● MCrosslinked polyolefin ● Crosslinked polyolefin
● UV and weather resistant ● UV and weather resistant
● Available for 2 to 5 cores cables ● Available for 2 to 5 cores cables
● Excellent sealing properties ● Excellent sealing properties
● Adhesive lined ● Adhesive lined
● Operating temp.: -55℃ to+110℃ ● Operating temp.: -55℃ to+110℃
● Min.shrink temp.: 110℃ ● Min.shrink temp.: 110℃
● Min.full recovery temp.: 130℃ ● Min.full recovery temp.: 130℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Heat shrinkable breakout is applied to the branch of high, medium, low voltage power cable or some special field. It is Heat shrinkable breakout is applied to the branch of high, medium, low voltage power cable or some special field. It is
made of crosslinked polyolefin which has elastomeric properties. High quality hot melt adhesive is coated on the inner made of crosslinked polyolefin which has elastomeric properties. High quality hot melt adhesive is coated on the inner
surface if needed that provides excellent sealing ability against moisture. surface if needed that provides excellent sealing ability against moisture.
Size: Size:
D I Recovered length±10% Recovered wall±20% D I Recovered length±10% Recovered wall±20%
Code No
Code No a*(Min) b*(Min) a*(Min) b*(Min) L F DW LW
a*(Min) b*(Min) a*(Min) b*(Min) L F DW LW 4.5
HP-HSB310-38/16 38 17 14 98 23 2.7 2.7
HP-HSB205-22/8 22 8 9 3.5 55 18 2.2 1.8 HP-HSB320-60/24 60 25 25 8 165 50 3 2.5
HP-HSB210-30/12 30 12 14 4.5 93 23 2.6 2.2 HP-HSB330-80/36 80 38 35 11 185 55 3.5 3.5
HP-HSB340-110/48 110 50 46 17.5 250 65 4 4
HP-HSB215-40/16 40 16 15 5 125 35 2.1 2.1
HP-HSB350-125/57 125 57 55 20 260 75 4 4
HP-HSB220-60/23 60 23 25 7.5 118 29 2.6 2.6 HP-HSB360-140/70 140 70 62 26 280 75 4 4
HP-HSB220L-60/23 60 23 25 7.5 155 45 2.6 2.6 HP-HSB370-170/77 170 77 75 28 280 80 4 4
HP-HSB310-40/16 40 16 15 4.5 125 35 2.1 2.1
HP-HSB230-100/42 100 42 30 9 155 55 3.1 3.1
HP-HSB320L-60/24 60 24 25 8 180 45 3.2 2.8
HP-HSB240-150/75 150 75 20 6 170 64 3.8 3.8 HP-HSB330L-80/36 80 38 35 11 215 57 4 4
Remark:a*=as supplied b*=after recovery Remark:a*=as supplied b*=after recovery
Characteristics Characteristics
Special Products
Special Products
● Crosslinked polyolefin ● Crosslinked polyolefin
● UV and weather resistant ● UV and weather resistant
● Available for 2 to 5 cores cables ● Available for 2 to 5 cores cables
● Excellent sealing properties ● Excellent sealing properties
● Adhesive lined ● Adhesive lined
● Operating temp.:-55℃ to+110℃ ● Operating temp.:-55℃ to+110℃
● Min.shrink temp.:110℃ ● Min.shrink temp.:110℃
● Min.full recovery temp.:130℃ ● Min.full recovery temp.:130℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Heat shrinkable breakout is applied to the branch of high, medium, low voltage power cable or some special field. It is Heat shrinkable breakout is applied to the branch of high, medium, low voltage power cable or some special field. It is
made of crosslinked polyolefin which has elastomeric properties. High quality hot melt adhesive is coated on the inner made of crosslinked polyolefin which has elastomeric properties. High quality hot melt adhesive is coated on the inner
surface if needed that provides excellent sealing ability against moisture. surface if needed that provides excellent sealing ability against moisture.
Size:
D I Recovered length±10% Recovered wall±20% Size:
Code No
a*(Min) b*(Min) a*(Min) b*(Min) L F DW LW D I Recovered length±10% Recovered wall±20%
HP-HSB410-40/15 42 15 14 3.5 105 26 2.2 2 Code No
a*(Min) b*(Min) a*(Min) b*(Min) L F DW LW
HP-HSB420-55/21 55 21 20 5 150 40 3.1 2.6
HP-HSB510-40/19 40 19 13 4 98 25 2.5 2.2
HP-HSB425-65/26 65 26 26 7 175 45 3.3 2.9
HP-HSB520-55/24 55 24 18 5 155 40 3.2 2.6
HP-HSB430-75/26 75 26 28 7 175 45 3.3 2.9
HP-HSB530-80/33 80 33 26 8 175 53 3 2.8
HP-HSB440-82/37 82 37 30 9 190 60 4 3
HP-HSB540-100/42 100 42 34 10 190 60 3 3
HP-HSB445-90/37 90 37 32 9 190 60 4 3
Remark:a*=as supplied b*=after recovery
HP-HSB450-100/47 102 47 38 12 198 58 4 3
HP-HSB460-125/52 130 52 52 15 240 75 4 4
HP-HSB470-160/70 160 70 64 19 260 75 4 4
Remark:a*=as supplied b*=after recovery
Characteristics Characteristics
Special Products
Special Products
● Cross-link modified polyolefin:Flexible,Flame ● Cross-link modified polyolefin:Flexible,Flame retarding,
retarding,Operating temperature range: -55℃-135℃ Operating temperature range:-55℃-135℃
● Fluoropolymer:Flexible,Flame retarding,Operating ● Fluoropolymer:Flexible,Flame retarding,Operating
temperature range:-55℃-200℃
temperature range:-55℃-200℃
● Cross-link modified polyolefin:Semihard, Oil and
● Cross-link modified polyolefin:Semihard, Oil and
solvent retardence,Operating temperature range:
solvent retardence,Operating temperature range:
-55℃-135℃
-55℃-135℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress
release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurcation release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurcation
and connection position from severe enviroment with high humidity. The heat shrinkable cable bifurcation sleeve is widely and connection position from severe enviroment with high humidity. The heat shrinkable cable bifurcation sleeve is widely
used in cable bifurcaiton connection position,it can provide convenient installation and reliable enviromental sealing used in cable bifurcaiton connection position,it can provide convenient installation and reliable enviromental sealing
protection. protection.
4 HP-MP-I5 36.0 36.0 21.0 2.0±0.10 7.8 2.0±0.10 87.0 3 HP-MP-L2 31.0 31.0 17.0 1.8±0.10 6.6 1.8±0.10 42.0
Other sizes are available upon request. Standard color: Black, other colors available on request.
5 HP-MP-I6 43.0 43.0 28.0 2.2±0.10 10.8 2.2±0.10 113.5
Other sizes are available upon request. Standard color: Black, other colors available on request.
Characteristics Characteristics
Special Products
Special Products
● Cross-link modified polyolefin:Flexible,Flame ● Cross-link modified polyolefin:Flexible,Flame retarding,
retarding,Operating temperature range: -55℃-135℃ Operating temperature range:-55℃-135℃
● Fluoropolymer:Flexible,Flame retarding,Operating ● Fluoropolymer:Flexible,Flame retarding,Operating
temperature range:-55℃-200℃ temperature range:-55℃-200℃
● Cross-link modified polyolefin:Semihard, Oil and ● Cross-link modified polyolefin:Semihard、Oil and solvent
solvent retardence,Operating temperature range: retardence,Operating temperature range:-55℃-135℃
-55℃-135℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress
release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurcation release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurcation
and connection position from severe enviroment with high humidity. The heat shrinkable cable bifurcation sleeve is widely and connection position from severe enviroment with high humidity. The heat shrinkable cable bifurcation sleeve is widely
used in cable bifurcaiton connection position,it can provide convenient installation and reliable enviromental sealing used in cable bifurcaiton connection position,it can provide convenient installation and reliable enviromental sealing
protection. protection.
Size: Size:
SIZE AS SUPPLIED MOULDED SIZE(complete shrink) SIZE AS SUPPLIED MOULDED SIZE(complete shrink)
NO. TYPE NO. TYPE
Hmin (J&K)min Hmax HW (J&K)max (J&K)W P Hmin (J&K&L)min Hmax HW (J&K&L)max (J&K&L)W P
1 HP-MP-Y1 27 13 12 2.5±0.10 5.6 1.7±0.10 40 1 HP-MP-S2 27.0 13.0 13.5 2.5±0.15 6.9 2.2±0.10 112.0
Other sizes are available upon request. Standard color: Black, other colors available on request. Other sizes are available upon request. Standard color: Black, other colors available on request.
Characteristics Characteristics
Special Products
Special Products
● Cross-link modified polyolefin:Flexible,Flame ● It is adhesive coated and when heated it will shrink to
retarding,Operating temperature range: -55℃-135℃ insure a complete lap-to-lap seal.
● Fluoropolymer:Flexible,Flame retarding,Operating ● UV-resistance Anti-aging.
temperature range: -55℃-200℃ ● Simple and easy installation over a wide variety of
● Cross-link modified polyolefin:Semihard、Oil and substrates and configurations.
solvent retardence,Operating temperature range: ● Temperature: -30℃to 100℃
-55℃-135℃
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress HP-1506 is heat-shrinkable insulation tape suitable for insulation busbar up to 1kV, designed for complex busbar geometry
release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurcation and restricted access areas where no open end is available. It's designed to be compatible with low-voltage insulation
and connection position from severe enviroment with high humidity. The heat shrinkable cable bifurcation sleeve is widely tubing.
used in cable bifurcaiton connection position,it can provide convenient installation and reliable enviromental sealing
protection.
Technical Data
Property Testing method Typical data
Technical Data
Tensile strength ASTM D638 ≥15MPa
● Property:Low shink temperature, Flame retarding, Flexible
● Installation temperature:150℃ Elongation at break ASTM D638 ≥480%
● Shrink ratio:Radial direction≥50%, Longitudinal change≤10%
Dielectric strength UL224 ≥25kV/mm
● Standard colour: Black
Dielectric constant UL224, AC2500V, 1min No Crack
1 HP-MP-W2 27.0 13.0 13.5 2.5±0.25 6.0 1.8±0.10 108.0 Defend mildew ASTM D638 Level 2
Other sizes are available upon request. Standard color: Black, other colors available on request.
Size:
Characteristics Characteristics
Special Products
Special Products
● It's adhesive-coated tape which provides insulation ● Working Temperature : -45 ~ 110 ℃
enhancement and protection against accidentally ● Shrinking temperature range: 120 ℃
induced discharge. ● Standard color: Clear
● Easily installed over a wide variety of shapes
● Other 12 colors available: White, Blue, Grey,
Yellow, Brown, Black, Orange, Pink, Red, Cyan,
including complex connections.
Green, Purple
● Excellent anti-tracking and UV-resistance properties
● Suitable for both indoor and outdoor use
+125℃
-55℃ >60° 2:1
Application: Application:
HP-1501 is heat-shrinkable insulation tape suitable for insulation busbar up to 10KV and 35kV, designed for complex Consist of cross linked polyolefin, Hot fusion tubing and Stainless Reinforcing Steel Rod which keep optic transmission
restricted access areas where no open end is available. It's designed to be compatible with high-voltage insulation tubing. properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during
installation without damaging and clear sleeve make it easy to detect splice before shrinkage. Sealing structure make the
splice free from influence of temperature and humidity in special environment.
Technical Data
Technical Data
Property Testing method Typical data
Dielectric strength UL224, AC2500V, 1min 5-10 kV/mm Property Test Method Typical data
Voltage ASTM D2671 42kV/1min(Min.space 30mm) no attack Tensile strength ASTM D 2671 ≥18 MPa
Thunder impact ASTM D638 75±15kV(Min.space 30mm) no attack Ultimate elongation ASTM D 2671 700%
Density ISO R 1183 D 0.94g/cm²
Volume resistance ASTM D2671 ≥1.0×1013 Ω•cm
Dielectric strength IEC 243 20KV/mm
Dielectric constant UL224 ≤3.5
Dielectric constant IEC 243 2.5 max.
Microtherm tenacity UL224 -55±2℃,4 hrs pass
Longitudinal change ASTM D2671 ±5%
Rust testing ASTM D 2671 23±2℃,humidity,95%,24 hrs Pass
Tensile strength ASTM D638 ≥12.0Mpa Size:
Elongation at break ASTM D638 ≥400%
Splice Protection Sleeves
Fusion Tubing Quartz or Ceramic Rod
Thermo aging ASTM D638 136℃,168 hrs Pass (After Shrinking)
Model
Outer Diameter Length Width x Height Length Width x Height Length
flammability UL224 ≥28 (±0.2) (±1) (±0.1) (±1) (±0.1) (±1)
Code Thickness(mm) Width(mm) Length(mm) Standard packin HP-HSFP-2C-6core 4.6 40 3.0x1.2 40 3.0x1.5 40
Special Products
Model
Outer Diameter Length Inner Diameter Length Outer Diameter Length ● Material: Polyolefin
(±0.2) (±1) (±0.1) (±1) (±0.1) (±1)
● Operating range : -45℃--+105℃
HP-HSFP-H-61x1.5x3.0 3.0 61 1.5 61 1.5 55
● High shrink Ratio at 3:1 for irregular shapes
HP-HSFP-H-45x1.5x3.0 3.0 45 1.5 45 1.5 40 ● With adhesive lined provides water-Proof
HP-HSFP-H-40x1.5x3.0 3.0 40 1.5 40 1.5 35 ● Flammability : VW-1
HP-HSFP-H-25x1.5x3.0 3.0 25 1.5 25 1.5 20 ● Standard color: Black
Notes: HSFP-H: High quality level(same as Tyco SMOUV) Other Size and wall thickness is available as customer’s order. The standard color is Black
HSFP-E: Economical Quality Level We can pack according to customer’s requests.
Characteristics Characteristics
Special Products
Special Products
● Excellent Bonding strength, waterproof, elasticity ● Excellent Bonding strength, waterproof, sealing,
● Excellent self-fusing sealing elasticity
● Resistance to water and humidity ● Excellent anti-tracking, anti-aging, self-sticking
● Color: Black ● Resistance to water and humidity
● Filling irregular shape and voids ● Color: Red
● Filling irregular shape and voids
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Filling Mastic Tape is used to filling the cable cores for insulation,sealing and waterproof performance. Suitable for used in Anti-Tracking Mastic Tape is used to filling the spacing between cable cores for insulation, sealing and waterproof
11kv, 24kv and 36kv joints and terminations. Filling mastic tape provide sealing for power cable termination and joints for performance. Suitable for used in 11kv, 24kv and 36kv joints and terminations. Anti-tracking mastic tape provide sealing
heat shrink and cold shrink technology. It is also used to bonding and sealing for connectors of electrical equipment and and anti-tracking for power cable termination and joints for heat shrink and cold shrink technology. It is also used to
heat shrink mould parts. bonding and sealing for connectors of electrical equipment and heat shrink mould parts.
Technical Data
Technical Data
Property Test method Typical data
Property Test method Typical data
Tensile strength ASTM D 2671 ≥0.1Mpa
Tensile strength GB/T 528-92 ≥0.1Mpa
Elongation at break ASTM D 2671 ≥1000%
Elongation at break GB/T 528-92 ≥1000%
Volume resistance IEC93 ≥1.0X1014 .cm
Volume resistance GB/T 1692-92 ≥1.0X1014 .cm
Dielectric strength IEC 243 ≥15KV/mm
Dielectric strength GB/T 1695-81 ≥15KV/mm Dielectric constant IEC 250 2--3
Dielectric constant GB/T 1693-81 2--3 Adhesive to steel DIN 30672 10N/cm
Characteristics Characteristics
Special Products
Special Products
● Reduce the electrical stress and equilibrate the ● Live installation
electrical field ● lightweight
● Excellent self-sticking
● anti-tracking
● weather resistance
● Resistance to water and humidity
● superior UV and Abrasion resistance
● Color: Yellow ● localized installation
● Filling irregular shape and voids ● range taking
● quick installation
+125℃ +125℃
-55℃ >60° 2:1 -55℃ >60° 2:1
Application: Application:
Stress Control mastic provides stress relief of the electrical field in all MV cable joints and terminations for power cable Designed to provide reliable protecting for different cables such as power cables and meshwork of tunnel, suitablefor
applications. The stress control mastic with excellent stress controlling and self-sticking properties make it widely use in single-phase 50Hz/25KV alternating current.
heat shrink and cold shrink technologies. Stress control mastic equilibrate the electrical field and reduce the electrical It can provide high resistance to tracking andarcing, as well as to enhance the insulation properties of cable from 1KV to
stress. Stress control mastic resistance to water and humidity, filling voids and irregular shapes. 35KV.without heating and easy to install and economic.
Used for railway contact network overhead line system, improve insulating performance and prevent electrical outages
Technical Data
caused by incidental contact from tree branches or wildlife.
Property Test method Typical data If overhead lines get across trees or are close to trees or buildings, it may lead to electrical outages caused by incidental
contact from tree branches or wildlife. Overhead line insulation sleeves can provide unique insulating protection solution
Tensile strength GB/T 528-92 ≥0.1Mpa
for those kind of problems.
Elongation at break GB/T 528-92 ≥1000%
Technical Data
Volume resistance GB/T 1692-92 ≥1.0X10 11 .cm
Property Test method Typical data
Dielectric strength GB/T 1695-81 ≥15KV/mm
Tensile strength GB/T 1040-92 ≥10MPa
Dielectric constant GB/T 1693-81 ≥13
Elongation at break GB/T 1040-92 500%
Adhesive to steel GB/T 2790-95 10N/cm
Dielectric strength GB/T 1408-89 ≥20KV/mm
Oxygen resistance - Pass
Volume resistance GB/T 1410-2006 ≥1.0×1014Ω·cm
Heat shock (105℃) - Pass
Dielectric constant GB/T 1409-2006 ≤3.0
Packing:Thickness* Width* Length (MM) 2*30*360MM Standard color: Yellow
other sizes and packing are available on request Flammability GB/T 2406-1993 ≥27
Size:
Crimping Tool
●
+125℃
-55℃
HP-HS-30J Crimping Tool
>60° 2:1
Crimping Tool 0.5-6.0mm2
Application:
Hampool Cold Shrink Sleeves are openended, tubular, rubber sleeves which are factory expanded and assembled onto a Crimping Capacity: 0.5-1.5, 1.5-2.5, 4.0-6.0mm2
removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal AWG: 22-10AWG
lug, etc, allowing the tube to shrink and form a water-resistant seal. The sleeve is made of Silicon rubber which contains no Color: Blue, Red, Orange
chlorides or sulfurs.
Technical Data
Technical data Typical Test Standard
Tensile Strength (MPa) ≥7.16 ASTM D 412-06a
Elongation at break(%) ≥670 ASTM D 412-06a
HP-LY-03C-D3 Crimping Tool Set
Crimping Tool Sets of HP-LY-03C with another 4 die
Shore A harness (HA) 43±3 ASTM D 2240-05
Tear Strength (N/mm) ≥35 ASTM D 624-00 Crimping Capacity: 0.5-1.5, 1.5-2.5, 4.0-6.0mm2
Size:
Supplied Recovery
NO. Size
ID(mm) ID(mm) Length (mm) Wall (mm)
Other sizes are available upon request. Standard Color: Black / Grey, other colors are available upon request.
Stripping Tool
Crimping Tool 0.5-10mm 2
Crimping Tool 6-50mm2
Crimping Capacity: 0.5-10mm2 Crimping Capacity: 6-50mm2
AWG: 22-10AWG AWG: 10-1AWG
Color: Blue, Red, Orange Length 390mm
Weight 1.3Kg
Web:www.hampool.com Skype:shrinkproducts
149 Email:sales@hampool.com info@hampool.com
Tel:-86-21-69927651 -86-18016407650 Fax:-86-21-69927652