Professional Documents
Culture Documents
Questions (13) Resultscore (30/48) : Options
Questions (13) Resultscore (30/48) : Options
ResultScore (30/48)
1
which of the following acts as buffer
Options
A. common source
B. common gate
C. common drain
CORRECTLY ATTEMPTED
D. cascode stage
2/2
2
the current ib through the base of a silicon npn transistor is 1+0.1cos(1000*pi*t) mA. At 300K, the
rpi in the small signal model of the transistor.
Options
A. 250 ohm
B. 25 ohm
CORRECTLY ATTEMPTED
C. 27.5 ohm
D. 22.5 ohm
4/4
3
In figure, both the transistors are identical and have a high value of β. Take the DC base emitter
voltage drop as 0.7 V. KT/q=25mv.the small signal low frequency voltage gain.
Less
Options
A. 100
CORRECT ANSWER
B. 110
C. 120
INCORRECTLY ATTEMPTED
D. 12
-1/4
4
In the cascode amplifier shown below, if the common emitter stage(Q1) has a transconductance
gm1 and the common base stage (Q2) has transconductance gm2 , the overall transconductance
gm of the cascode amplifier
Less
Options
A. (gm1)/2
B. (gm2)/2
C. gm1
CORRECT ANSWER
D. gm2
INCORRECTLY ATTEMPTED
-1/4
5
For the amplifier shown in the figure the bjt parameters are Vbe=0.7V and β=200 and thermal
voltage Vt=25mV. The voltage gain of the amplifier is.
Options
A. -232
CORRECTLY ATTEMPTED
B. -280
C. -182
D. -382
4/4
6
In the circuit shown below, assume the opamp is ideal.
If R=1 and Is=1pA and the thermal voltage Vt=25mV, then what is the value of the output voltage
Vo for an output voltage Vs of 1V.
Less
Options
A. -0.56V
B. -0.66V
C. -0.81V
CORRECTLY ATTEMPTED
D. -0.90V
4/4
7
The CMRR of the differential amplifier shown is
Options
A. infinity
B. 0
C. 900
CORRECTLY ATTEMPTED
D. 1800
4/4
8
Options
A. A
B. B
CORRECT ANSWER
C. C
D. D
INCORRECTLY ATTEMPTED
-1/4
9
Determine Io and Vop if Vi=2V. Assume Beta=99 and Vbe=0.7V
Vee=-15V
Options
A. Io=2.5A Vop=5.25V
B. Io=1.7 A, Vop=4.25V
C. Io=1.7A Vop=5.25V
CORRECTLY ATTEMPTED
D. Io=2.5A,Vop=4.25V
4/4
10
each transistor in darlington pair has β=100. the overall hfe of the composite transistor and
transconductance are (neglecting the leakage current):
Options
A. 10000, gm2
B. 10100,0.5gm2
CORRECTLY ATTEMPTED
B. CG+CD
C. CS+CS
D. CG+CS
INCORRECTLY ATTEMPTED
-1/2
12
Options
A. A
CORRECTLY ATTEMPTED
B. B
C. C
D. D
4/4
13
If the repetition of the switching action is 104 times per second, C1=100pF, C2=10pF and
V=10mV.what is the average change of output voltage?
Options
A. -500V/sec
B. -1000V/sec
CORRECTLY ATTEMPTED
C. -1500V/sec
D. -2000V/sec
4/4
Subjective Questions
Questions attempted: 1 of 1
#Questions (1)
Score (0/2)
1
in order that the circuit of figure work as a differentiator it should be modified to.....(draw the
modified circuit)
Expected answer Submission
Differentiator consists of a
negative terminal of am op
grounded and there is a fee