Professional Documents
Culture Documents
1. For the feedback amplifiers shown below find the topology, the corresponding gain with
feedback and the input and output resistance with feedback.
Vdd
RC
RS
VO
+
VS −
RE
Vdd
RD
RG
VO
RS
VS + RM
−
Prepared by: Getachew T./ Daniel D./ Abel G./ Yonathan W./ Ermias T./ Selameab S. 1
Vdd Vdd
R2 R3
Vout
R1
Vin
R4
R6 R5
Vdd
R4
R3 Vout
Vin
R1
R2
Prepared by: Getachew T./ Daniel D./ Abel G./ Yonathan W./ Ermias T./ Selameab S. 2
2.5 V
0.5mA
vS
vG1 Q1 Q2 vG2
vD1 vD2
4 k ohm 4 k ohm
-2.5 V
Figure 5
(a) For vG1 = vG2 = 0V , |VOV | and VSG for each of Q1 and Q2 . Also find VS , VD1 , and
VD2 .
(b) If the current source requires a minimum voltage of 0.4 V, find the input common-
mode range.
0
3. For the differential amplifier shown in Figure 5, let Q1 and Q2 have kp W/L = 4mA/V 2 ,
and assume that the bias current source has an output resistance of 30kΩ. Find |VOV |,
gm , |Ad |, |Acm |, and the CMRR(in dB) obtained with the output taken differentially. The
drain resistances are known to have a mismatch of 2%.
Prepared by: Getachew T./ Daniel D./ Abel G./ Yonathan W./ Ermias T./ Selameab S. 3