Professional Documents
Culture Documents
Websita: www.met.co.in
Office 1-4, First Floor. Mukund House, Lab.: Plot No. 43, HSIIDC, Indl. Estate. Emait: info@met.co.in
TEST
REPORT
METL/RH/186 (71)/2018
Deseription of Sample: Design Mix of M-35 Report No.
Date of Report: 25/08/2018
Letter Dated: 8/2018
08-24/08/2018
Date of Testing:
Date of Receipt:07/08/2018
ssucd to:
Sieve Analysis
LS. Sieve
%Passing 100
40 mm 100
IS-2386 (Part-1-1963, R-2016
96.4 85-100
20 mm
16.1 0-20
10 mm
0-5
IV. 4.75 mm 2.4
Authorised Signatory
Analyst
of
applicable parameters endorsement
T6C1 The to the tested samples and
Lab. is limited to the
invoiced amount. 3.
Produceresultlisted refer onty ofour
implied. 2. Total liability 4. This report is not be
date of issue of test report. lawand should not be
Sampleswil e rinferednor
after 90 Days from the court of
ASSESSMENTS
eprocucete destroyed an evidence in the
cannot be used as
Usedina oyorin part and in wiung.
media without ourspecialpermission
ddvertising
AlmlCR ENGINEERING
& T E S T I N G L A B O R A T O R Y
14001:2015)
& ISO
(Accredited a per ISO 17025:2005, ISO
001:2008
Website: www.meti.co.n
Emait: info@metl.co.in
TEST REPORT
12.5mm Method of Test
Aggregate
8 Coarse Parameteers Test Value Requirement as
S No.
Sieve Analysis %Passing Per IS-383-2016
LS. Sieve
16.0 m m 100 100 IS-2386 (Part-I)-1963, R-2016
5.6 0-10
V.4.75 mm
Coarse Agg.
CSieveAnalysisofMixed
Fracion-I
(20mm) -52 %
Fraction-I (1Omm)-48% Method of Test
Requirement as
Test Value
Parameters Per IS-383-2016
S.No. %Passing
.
Sieve Analysis
LS. Sieve 100
100 IS-2386 (Part--1963, R-2016
40.0 mm
94.7 90-100
20.0 mm
28.6 5-55
10.0 mm
0-10
3.9
V.4.75 mm
to IS-383: 2016
of Coarse Agg. Conforming
Sieve Analysis
Method of Test
D. Fine Aggregate (Stone Dust)_ Test Value
Requirement as
Per IS-383-2016
S.No. Parameters %Passing
. Sieve Analysis
LS. Sieve 100
100
L 10mm 90-100
97.4
4.75mm 83.7
75-100
IS-2386 (Part-)-1963, R-2016
2.36 mm 55-90
74.1
1.18 mm 35-59
51.0
. 600 micron 8-30
26.9
300 micron 0-10
9.2
VIL.150micron
Authorised Sigeátory
Analyst
endorsement of
samples and applicable parameters
invoicedamount. 3.
Lab. is limited the
tested to
to the
i s t e d refer only liability ofour This report is not be
issue of test report 4.
Jct is neitheeri Total
inferednorimplied. 2. ASSESSMENTS
the date of and should not be
amples will beerestroyed after 90 Days from courtoflaw
producer destroyed an
inpartand
usedas
cannot be
an evidence in the
in wning.
edinanvard or
u v e r t i s i n g media without our
specialpermission
A T I C E N G I N E E R I N G
&TESTING LABORATOR Y
1:2015
14001:20
& ISO
9001:2008
ISO
ACcredited as per ISO17025:200s, Website: www.metl.co.in
Emai: info@metl.co.in
Estate,
HSIIDC,
Indl. metlsonyahoo.com
Lab.: Plot No. 43,
Office:1-4, First Floor, Mukund House, | 131o29
Hai, Sonepat, Haryene-13102S
TEST REPORT
Stipulations
forM35
in the field at 28 day 35 N/mm
EDesien ristic Comp. Stg. required
20
Chara
mm
Aggregate,
size of
Maxvimum
25-75
Workability(Shump) m m
Good
Contro!
of
Quality 43.25 N/mm (Min.)
Degre 28 days
strength, after
mean
Target
Concrete characteristics.workability
M-35
resultFor cubic Meter Comp. Stg.
Typical test
material per Stg. At
Eqvt Comp. at 7 days
of condition
Comp. Stg
Quantities
on Dry Slump,
28 days, as per Normal Curing,
concrete
Coarse Coarse Accelerated in
of
Water Fine mm
IS 9013, N/mm
Cement
Agg.20mm Agg.125mm boiling water, Nimm
Mix Kg. Agg Fraction-I Fraction-II
Kg Kg.
N'mm 31.9
No.
52%, kg 48%, kg 44.8
22.4
634 586 60
450
168 633
(38.5%)
(WIC-O373)
Ca
Fa
Cement Water
Mix Proportion: 2.711
0.373 1.407
1
of cement (50kg) for M-35
Material required for the mix/bag
50.000 kg.
a)Cement
70.350 kg.
b) Fine Ag
135.550 kg.
)CoarseAge. 70.486 kg.
Fraction-L, 20mm
65.064 kg.
Fraction-I1, 12.5mm
Authorised signatory
Analyst
endorsement of
14001:2015)
&ISO
CAceredited as per 1SO 17025:2005, 1SO 9001:200be
Website: www.meti.co.in
Email: info@meti.co.in
TEST REPORT
Ratio
water-cement
. For
tity
2. Extra q u a n t i t y of water to be added=(#)0.664 kg as water absorption of coarse agg. is 0.49 %w/w
Extraquantityof of water to be added =
(+) 1.316 kg as watcr absorption of fine aggiis 1.87 %w/w
quantity
of w a t e r 20.630 Kg.
4. Actual
Required
aActual
quantity ofcoarse agg.
70.486-0.345 = 70.141 kg.
) Fraction-I, 20mm
Analyst Authorsedsig