Professional Documents
Culture Documents
4. Remove bell nipple. Dropping bell nipple and fingers getting Watch for pinch points.
pinched.
5. Shut down koomey and vent pressure. Pressure remaining on koomey lines. Ensure all gauges for zero reading.
6. Remove koomey pressure lines. Trapped pressure and fingers getting Be careful on lines and pinch points.
pinched.
7. Remove choke and kill lines. Struck by and pressure remaining on lines. Check for pressure on lines.
8. Using BOP winches, take slack from Falling of BOP. Use safety harness and fall arrest devices.
shackles.
9. Remove bolts from BOP. Slipping, eye injury and finger injuries. Wear harness, safety glasses and watch for
pinch points.
10. Lift BOP and place on set back stump. Caught in, on or between, dropping BOP. Remain alert and clear, ensure proper lifting.
List Below the Personal Protective Equipment, Special Tools and Other Safety Equipment Required to do this Job
Fall arrest, safety harness, safety boots, hard hat, safety glasses and gloves.
SIGN-OFF
JSA Written By: JSA Approved By:
Original – Rig Files Copy – Area Office Copy – Beijing Office Page 1 of 1
F0782 (2)
Original – Rig FilesCopy – Area OfficeCopy - Operator