Professional Documents
Culture Documents
1 Uniswitch
Cubicle Types
Switch Disconnector Cubicle,
type SDC
Switch disconnector cubicle type SDC, Basic equipment
is mainly used as an incoming, ring or Top unit, including
branch cubicle. The basic unit is equipped – 3-position switch disconnector
with an SF6-insulated, 3-position switch – operating mechanism with
disconnector type SFG with its operation mechanical position indication
mechanism. The 3-position switch dis- – enclosure of busbar compartment
connector may be in one of three posi- – integrated low voltage
tions, “closed”, “open” or “earthed”, there- compartment
fore preventing incorrect operation. – interlocking unit
Access to the cable compartment is – busbars
possible in earthed position. “Open” and – earthing bar
“earthed” positions are “visible” through
the inspection windows placed behind Bottom unit, including
the low voltage compartment door. – enclosure of cable compartment
Inspection of cable connections and fault – cable entry with cable support
indicators, when used, is easily carried
out through the front-door window.
ABB 13
UNIS 5 GB
4.2 Uniswitch
Cubicle Types
Switch Disconnector cubicle with Fuse,
type SDF
Fused switch disconnector cubicle type Basic equipment
SDF, is primarily used for transformer Top unit, including
protection voltage metering. The cubicle – 3-position switch disconnector
is equipped with a SF6-insulated, 3-posi- – operating mechanism with
tion switch disconnector and with earth- mechanical position indication
ing switch. For fuse earthing, the inte- – enclosure of busbar compartment
grated earthing switch operates on the – integrated low voltage
upstream side and separate earthing compartment
switch operates on the downstream side – interlocking unit
of the fuses.The mechanism used is a – fuse tripping with indication
double spring mechanism with automatic – busbars
fuse-tripping. Access to cable compart- – earthing bar
ment is possible in earthed-position.
“Open” and “earthed” positions are Bottom unit, including
“visible” through inspection windows – earthing switch type EF
placed behind the low voltage compart- – fuse base
ment door. Inspection of cable connec- – enclosure of cable compartment
tions and fault indicators when used, is – cable entry with cable support
easily carried out through the front-door
window.
Cubicle Accessories
– integrated voltage indicators
or socket interface for portable
indicators
– auxiliary contacts for close
(2NO+2NC) and earth (2NO+2NC)
position
– auxiliary contacts for fuse
tripped, 1NO+1NC
– gas density indication with alarm
contact
– emergency tripping
– tripping coil
– motor operation device
– voltage transformers
– arc-gas channel
– channel for control cables
– anti condensation heater
– through-going earthing bar
– apparatus earthing bar
14 ABB
UNIS 5 GB
4.3 Uniswitch
Cubicle Types
Circuit Breaker Cubicle,
type CBC
The circuit breaker cubicle, type CBC Basic equipment
is designed for control and protection Top unit on right hand side, including
of distribution lines, networks, motors, – 3-position switch disconnector
transformers, capacitor banks, etc. The – operating mechanism with
cubicle can be equipped with a vacuum mechanical position indication
or a SF6-gas circuit breaker. The breaker – enclosure of busbar compartment
is rail mounted and fixed to the busbars. – interlocking unit
To achieve the disconnecting function – busbars
a 3-position switch disconnector with an – earthing bar
earthing switch is mounted between
the breaker and busbars. Top unit on left hand side, including
– integrated low voltage
The door is mechanically interlocked compartment for secondary
with the switch disconnector's earthing components
position to provide personal safety. The – enclosure of busbar compartment
cubicle is designed to be equipped with
CTs and VTs (Standard DIN size, see Bottom unit, including
item 5.10). – earthing switch type EM
– enclosure of cable compartment
– cable entry with cable support
Cubicle Accessories
– circuit breaker, vacuum- or
SF6-type
– integrated voltage indicators
or socket interface for portable
indicators
– current transformers
– voltage transformers
– cable core transformer
– auxiliary contacts for close
(2NO+2NC) and earth (2NO+2NC)
position
– gas density indication with alarm
contact for switch disconnector
– motor operation device
– arc-gas channel
– channel for control cables
– anti condensation heater
– through-going earthing bar
– apparatus earthing bar
ABB 15
UNIS 5 GB
4.4 Uniswitch
Cubicle Types
Withdrawable Circuit Breaker cubicle,
type CBW
The CBW panel is a circuit breaker panel Basic equipment
with a withdrawable circuit breaker. The Basic cubicle, including
circuit breaker cubicle is designed for – metal enclosed Alu-zinc steel
control and protection of distribution cubicle enclosure with integrated
lines, networks, motors, transformers, rear-mounted arc gas channel
capacitor banks, etc. The cubicle is avail- – busbars
able with either vacuum or SF6-gas – non-metallic partitioning and shutter
circuit breaker. The CB truck handles – low voltage compartment for
the disconnecting function of the circuit secondary components
breaker. A separate earthing switch – withdrawable circuit breaker,
enables earthing of the cables. vacuum- or SF6-type, including
interlocked LV cable plug
The door is mechanically interlocked with – earthing switch, including inter-
the circuit breaker and the earthing locked operation device
switch to provide personnel safety. – cable entry with cable support
16 ABB
UNIS 5 GB
4.5 Uniswitch
Cubicle Types
Direct Busbar connection Cubicle,
type DBC
To connect cables to the busbars, a Basic equipment
busbar connection cubicle is available. Top unit, including
This cubicle is equipped with connection – bushings
lugs for fixing the cables. CT's can be – enclosure of busbar compartment
installed in the 500 mm cubicle. – interlocking unit, but only when
using earthing switch (EM)
The lower front door is fixed and can only – integrated low voltage
be opened with a tool when earthing compartment
switch is not included. The door has a – busbars
window for inspection. – earthing bar
Cubicle Accessories
– integrated voltage indicators
or socket interface for portable
indicators
– current transformers
– earthing switch for CT’s (EM)
– arc-gas channel
– channel for control cables
– surge arresters
– anti condensation heater
– through-going earthing bar
ABB 17
UNIS 5 GB
4.6 Uniswitch
Cubicle Types
Bus Riser Cubicle,
type BRC
Bus riser cubicle, type BRC, connects the Basic equipment
busbar to the bottom of a sectionalising Top unit, including
cubicle with circuit breaker or switch – bushings
disconnector. This 500 mm width cubicle – enclosure of busbar compartment
can be used as a metering cubicle with – integrated low voltage
space for 3 CTs and 3 VTs. compartment
– busbars
The lower front door is fixed to the cubicle – earthing bar
and has to be released with a tool. The
door has a window for inspection. Bottom unit, including
– enclosure with bus riser bars
– bottom cover
Cubicle Accessories
– integrated voltage indicators
or socket interface for portable
indicators
– current transformers
– voltage transformers
– earthing switch with position
indication
– auxiliary contacts for earthing
switch, 2NO+2NC
– arc-gas channel
– channel for control cables
– anti condensation heater
– through-going earthing bar
18 ABB
UNIS 5 GB
Uniswitch
Sectionalising Cubicle,
type SEC
The sectionalising cubicle is always Basic equipment
used together with the bus riser cubicle. Top unit, including
The standard version with 375 mm – 3-position switch disconnector
width is equipped with a SF6-insulated, – operating mechanism with
3-position switch disconnector for mechanical position indication
sectionalising the busbars. Earthing – enclosure of busbar compartment
facility is provided always as a standard. – integrated low voltage
compartment
– interlocking unit
– busbars
– earthing bar
Cubicle Accessories
– integrated voltage indicators
or socket interface for portable
indicators
– auxiliary contacts for close
(2NO+2NC) and earth (2NO+2NC)
position
– gas density indication with alarm
contact
– motor operation device
– current transformers
– arc-gas channel
– channel for control cables
– anti condensation heater
– through-going earthing bar
– apparatus earthing bar
– voltage transformers
ABB 19
UNIS 5 GB
4.8 Uniswitch
Cubicle Types
Sectionalising cubicle with Fuse,
type SEF
The cubicle type SEF is used when a Basic equipment
sectionalising cubicle with fuse protec- Top unit, including
tion is needed, or if there is a require- – 3-position switch disconnector
ment for measuring on the transformer – operating mechanism with
feeder. For fuse earthing, the integrated mechanical position indication
earthing switch operates on the upstream – enclosure of busbar compartment
side and separate earthing switch oper- – integrated low voltage compartment
ates on the downstream side of the – interlocking unit
fuses. – fuse tripping with indication
– busbars
The mechanism used is a double spring – earthing bar
mechanism with automatic fuse tripping.
Access to cable compartment is only Bottom unit, including
possible in earthed-position. A visible – earthing switch type EF
check of the “open” and “earthed” posi- – fuse base
tions is available through inspection win-
dows placed in the low voltage compart-
ment. Busbar connections to both left
and right are possible.
Cubicle Accessories
– integrated voltage indicators
or socket interface for portable
indicators
– auxiliary contacts for close
(2NO+2NC) and earth (2NO+2NC)
position
– auxiliary contacts for fuse tripped,
1NO+1NC
– gas density indication with alarm
contact
– emergency tripping
– tripping coil
– motor operation device
– arc-gas channel
– channel for control cables
– anti condensation heater
– through-going earthing bar
– apparatus earthing bar
20 ABB
UNIS 5 GB
4.9 Uniswitch
Cubicle Types
Sectionalising Breaker Cubicle,
type SBC
Sectionalising breaker cubicle is used
Basic equipment
together with the bus riser cubicle. The
Top unit on right hand side, including
standard cubicles are equipped with
– 3-position switch disconnector
a SF6 insulated 3-position switch dis-
– operation mechanism with
connector in series with a circuit breaker
mechanical position indication
for sectionalising the busbar. The cubi-
– enclosure of busbar compartment
cle is equipped with a vacuum or a SF6-
– interlocking unit
gas circuit breaker. The breaker is rail
– busbars
mounted and fixed to the busbars. Earth-
– earthing bar
ing facility on the switch disconnector is
always included.
Top unit on left hand side, including
– integrated low voltage compartment
The door is mechanically interlocked with
for secondary components
the switch disconnector's earthing posi-
– enclosure of busbar compartment
tion to give personal safety. The cubicle
is designed to be equipped with CTs and
VTs (Standard DIN size, see item 5.9).
Cubicle Accessories
– circuit breaker, vacuum- or SF6-type
– integrated voltage indicators or socket
interface for portable indicators
– current transformers
– voltage transformers
– auxiliary contacts for close
(2NO+2NC) and earth (2NO+2NC)
position
– gas density indication with alarm
contact for switch disconnector
– motor operation device
– arc-gas channel
– channel for control cables
– earthing switch type EM
– anti condensation heater
– through-going earthing bar
– apparatus earthing bar
ABB 21
UNIS 5 GB
4.10 Uniswitch
Cubicle Types
Sectionalising Withdrawable
Breaker cubicle, type SBW
The SBW panel is a sectionalising cir- Basic equipment
cuit breaker panel with a withdrawable Basic cubicle, including
circuit breaker. The SBW is used together – metal enclosed Alu-zinc steel cubicle
with the bus riser cubicle (BRC). The enclosure with integrated
cubicle is designed for sectionalising the rear-mounted arc gas channel
busbar in the switchgear. It is available – busbars
with either vacuum or SF6-gas circuit – non-metallic partitioning and shutter
breaker. The CB truck handles the dis- – low voltage compartment for
connecting function of the circuit breaker. secondary components
A separate earthing switch enables earth- – withdrawable circuit breaker,
ing of the busbar. vacuum- or SF6-type, including
interlocked LV cable plug
The door is mechanically interlocked – earthing switch, including interlocked
with the circuit breaker and the earthing operation device
switch to provide personnel safety.
22 ABB
UNIS 5 GB
4.11 Uniswitch
Cubicle Types
Sectionalising Metering cubicle with
Disconnector, type SMD
Sectionalising metering cubicle, type Basic equipment
SMD, is mainly used when medium vol- Top unit on left hand side, including
tage metering is required and/or when – 3-position switch disconnector or
there is a requirement to sectionalise bushing
the switchgear. Cubicle is based on – operation mechanism with
operation of two separetly operated mechanical position indication
3-position, SFG type switch disconnec- – integrated low voltage compartment
tors. Switch disconnectors are located – interlocking unit
at both ends of the secitonalised bus- – busbars
bar. DIN size VT’s and CT’s are avail- – earthing bar
able on right hand side of the switchgear.
Top unit on right hand side, including
3-position switch disconnectors are – 3-position switch disconnector or
interlocked with cubicle front door and bushing
access into cable compartment is – operation mechanism with
possible only when both switch discon- mechanical position indication
nectors are in earthed-position. – integrated low voltage compartment
– interlocking unit
– busbars
– earthing bar
Cubicle Accessories
– integrated voltage indicators or socket
interface for portable indicators
– auxiliary contacts for close
(2NO-2NC) and earth (2NO+2NC)
position
– gas density indication with alarm
contact for switch disconnector
– current transformers
– voltage transformers
– channel for control cables
– arc-gas channel
– anti condensation heater
– through-going earthing bar
– apparatus earthing bar
ABB 23
UNIS 5 GB
4.12 Uniswitch
Cubicle Types
Sectionalising Metering Cubicle,
type SMC
Sectionalising metering cubicle, type Basic equipment
SMC, is mainly used when medium Top unit on left hand side, including
voltage metering is required and/or when – 3-position switch disconnector or
there is a requirement to sectionalise the bushing
switchgear. Cubicle is based on ope- – operation mechanism with
ration of one rail mounted circuit breaker mechanical position indication
and two separetly operated 3-position, – integrated low voltage compartment
SFG type switch disconnectors. Switch – interlocking unit
disconnectors are located at both ends – busbars
of the secitonalised busbar with the – earthing bar
circuit breaker in between, after left hand
side switch disconnector. DIN size VT’s Top unit on right hand side, including
and CT’s are available on right hand side – 3-position switch disconnector or
of circuit breaker, in previously mentioned bushing
order. – operation mechanism with
mechanical position indication
3-position switch disconnectors are – integrated low voltage compartment
interlocked with cubicle front door and – interlocking unit
access into cable compartment is – busbars
possible only when both switch discon- – earthing bar
nectors are in earthed-position.
Bottom unit, including
– enclosure of busbar compartment
Cubicle Accessories
– circuit breaker, vacuum- or SF6-type
– integrated voltage indicators or socket
interface for portable indicators
– auxiliary contacts for close
(2NO-2NC) and earth (2NO+2NC)
position
– gas density indication with alarm
contact for switch disconnector
– current transformers
– voltage transformers
– channel for control cables
– arc-gas channel
– anti condensation heater
– through-going earthing bar
– apparatus earthing bar
24 ABB
UNIS 5 GB
4.13 Uniswitch
Cubicle Types
Bus Metering Cubicle,
type BMC
Metering cubicle, type BMC, is mainly Basic equipment
used when medium voltage metering is Top unit on left hand side, including
required. DIN size VT’s and CT’s are – integrated low voltage compartment
available on right hand side of cubicle. – interlocking unit
Access into cable compartment is – busbars
possible only when the interlocking – earthing bar
unit is in the door open position. – bushings
Cubicle Accessories
– integrated voltage indicators or socket
interface for portable indicators
– current transformers
– voltage transformers
– channel for control cables
– arc-gas channel
– anti condensation heater
– through-going earthing bar
ABB 25
UNIS 5 GB
Uniswitch
6 main configurations
26 ABB
UNIS 5 GB