Professional Documents
Culture Documents
Networking cables · CATV Co-axail cables · CCTV Cables · Fire Alarm Cables · Data Cables
ISO 9001
Devidayal Mehta
Founder
Devidayal Mehta the doyen of Devidayal group of companies has been leading industrialist
of Delhi in Aluminium, Copper and other non- ferrous metals for several years now. A gentle
hearted man, shri Devidayal Mehta was also known as philanthropist of Delhi. He started
manufacturing of Aluminium wire in the year 1950 by setting up his own foundary shop and
getting Aluminium wire rod manufactured from it, to be converted into Aluminium wire.
It was the most prestigious moment for him when he was approached by official of Defence
services for developing special Alumunium alloys to be used by Army. He has been
instrumental in developing many import substitutes for Aluminium alloy wires. Under his
able guidance and patronage “Mahindayal” cables began its journey and now is poised to
capture the wires and cables market through its quality products.
Introduction
Mahindayal wires & cables are design & manufactured according to various national &
international standards such as British standard (BSS), American standard for testing
method (ASTM), Indian Railways specification (IRS) Indian Telecom Department (ITD),
Telecom Engineering Centre (TEC), Engineers India Limited (EIL) & Bureau of Indian
standards (BIS).
Mahindayal PVC insulated industrial wires & cables are manufactured at most
sophisticated plants under stringent quality control right from the procurement of raw
material till dispatch of finished goods. All test are carried out at our quality assurance and
testing laboratories as per the requirement of the relevant quality standard or clients
stipulations. Pure electronic grade bright annealed bare copper / annealed tin copper is
used with 100% conductivity . Our wires offer greater flexibility and are easy to pull through
conduits without any damage or extra effort.
By ensuring pace with the latest technological advancement and interaction with the
customers, dedicated team of engineers always focus on new ides with deep scientific
knowledge to not only meet but to exceed customers expectation every time with same
passion and endeavour which allowed us to introduce cables which are extruded from
specially formulated PVC polymer that restrict toxic & hazardous gases and smoke. These
cables are recommended to use at the places with high human concentration like Hospitals,
Hotels, shopping Malls & other high rise buildings to save human life from causalities
happen due to chocking caused by generation of toxic & hazardous gases. Research &
development at Devidayal & Mahindra cable industries is an endless process.
RANGE OF POLYMERS
Flame Retardand Low Smoke & Halogen: These wires are extruded with special polymer with
special flame retardant, low smoke & halogen emiting and toxic fumes suppressing properties.
Mahidayal FR-LSH wires are self extinguish and do not allow fire to spread.?
Zero Halogen Low Smoke: These wires are extruded using specially formulated polymer from
the hydrocarbon family of insulants, Mahindayal ZHLS wires disables the release of halogen
gas and toxic fumes, the inhanlation of which can be fatal for lungs.
TECHNICAL FEATURES
Zero Halogen
Lead Free Flame Flame Retardant
Low Smoke &
S.N. Feature Low Smoke
Retardant (LFFR) Halogen FR-LSH
(ZHLS)
1. Insulation Material Spl. PVC Spl. PVC Spl. Polymer
10. Release of Halogen Gas During Burning (%) NA < 20% Good < 2% Excellent
Today, communication in remote areas is gaining more importance. VSAT networks offer
the most cost effective solution for such communication needs. Here, the user's terminal
can be connected to a remote office via the VSAT network. Hence day-to-day business
communications, such as high quality telephone calls, conferencing, high speed fax
transmission, e-mail and more can be done with great convenience. These remote offices
can also have high speed data connections that use the satellite to transmit voice and data
services. In VSAT networks the cable that connects the Dish to Receiver and the Network
Control Centre must be reliable and of high quality. The cables used are of two types 75-
ohm impedance and 50-ohm impedance. The cables available in 75-ohm impedance are of
RG-6F and RG-11F types and that in 50-ohm impedance are of RG-8F and RG 213F types.
Mahindayal co-axial cables are ideal for use in VSAT and Cable TV networks. They are
designed for optimum performance and value for money. In VSAT networks Mahindayal
coaxial cables provide complete reliability. This means instant, secure communications,
without any breakdown. Mahindayal co-axial cables have the centre conductor of
solid/stranded bare electrolytic grade99.97% pure copper. The secondary conductor is
specially designed with polyaluminium tape, applied longitudinally which overlaps and is
bonded on the foam dielectric. Aluminium alloy wires with high tensile strength are braided
and applied over the aluminium tape with specified coverage. The cable is then jacketed
with a special long lasting UV resistant PVC compound.
TECHNICAL DATA
A.CONSTRUCTION A.CONSTRUCTION
1 Inner Conductor Solid Bare Stranded Bare 1 Inner Conductor Solid Bare Solid Bare
Copper Copper Copper Copper
2 Nominal Conductor Diameter 2.70 2.25 2 Nominal Diameter (mm) 1.02 1.63
(mm) (7x0.75 mm)
3 Dielectric Foam PE Foam PE
3 Dielectric Foam PE Foam PE
4 Nominal Dielectric Diameter 4.57 7.11
4 Nominal Dielectric Diameter 7.20 4.90 (mm)
5 First Outer Conductor Bonded Al Tape Bonded Al Tape
5 First Outer Conductor Bonded Al Tape Bonded Al Tape
6 Second Outer Conductor Al Alloy Braid Al Alloy Braid 6 Second Outer Conductor Al Alloy Braid Al Alloy Braid
7 Nominal Coverage (%) 90 95 7 Nominal Coverage (%) 60 60
PVC (Black) PVC (Black) 8 Jacket PVC (Black) PVC (Black)
9 Nominal Jacket Diameter (mm) 10.30 7.40 9 Nominal Diameter (mm) 7.0 10.0
10Bending radius, Minimum (mm) 100 75 10Bending radius, Minimum (mm) 65 75
B.ELECTRICAL
1 Nominal Capacitance (pf/mtr.) 78 100 1 Nominal Capacitance (pf/mtr.) 53 53
2 Nominal Impedance (Ohm) 50 50 2 Nominal Impedance (Ohm) 75 75
3 Nominal Velocity Ratio (%) 66 66 3 Nominal Velocity Ratio (%) 85 85
C.ATTENUATION (@ 20 0C) C.ATTENUATION (@ 20 0C)
FREQUENCY MHz dB/100m Max. dB/100m Max. FREQUENCY MHz dB/100m Max. dB/100m Max.
50 3.39 3.94 55 5.20 3.15
100 4.34 7.55 83 6.20 3.87
400 9.18 15.75 400 13.30 8.53
500 9.84 - 500 14.95 9.51
1000 13.94 29.53 1000 21.45 14.27
CATV CO-AXAIL CABLES 75 Ohms.
Mahindayal co-axial cables used for CATV networks are designed for optimum
performance and value for money. The arithmetic is very simple. The cables offer higher
bandwidth, so your customers can receive the maximum number of channels with a high
level of picture and sound quality. These cables are uniquely designed for specialised
application. This translates to more happy customers, larger cable TV networks and more
profits for the cable operators. The cable is with central conductor of Copper Clad
Aluminium (CCA) which offers less weight and hence can support longer span of cables.
Also due to the principle of skin effect, the copper cladding over the central aluminium
conductor carry signal without any loss of signal quality. The cable is also suitable for
power pass application.
Mahindayal co-axial cables used for DTH and CATV networks are designed for optimum
performance and value for money. The arithmetic is very simple.The cables offer higher
bandwidth, so your customers can receive the maximum number of channels with a high
level of picture and sound quality.These cables are uniquely designed for specialised
applications. This translates to more happy customers, larger cable TV networks and more
profits for the cable operators. The cable is with central conductor of Copper Clad Steel
(CCS) which offers high mechanical strength and hence can support longer span without
stretching. The cable withstands all mechanical abuses during operations. Due to the
principle of skin effect, the copper cladding over steel conductor carries signal without any
loss of signal quality.
Applications :
Building Automation System Cables Available with us are used in multiplexes, malls and High rise buildings. For this a
total complement of cables for control, connectivity, alarm, security, sound, water sprinklers to be used for, CCTV
Cameras, Access control, P.A. systems and Building management systems .i.e Total IBMS solutions
TECHNICAL DATA
Voltage Drop
Nominal Thickness
Insulation (Nom)
Max. conductor
per KM at 20ºC
Nominal Cross
Current Rating
/Amp/Meter
Sectional Area
Number/Nom.
Of Conductor
Thickness
Dia of Cond.
Resistance
DC or Single
DC or Single
Appx. Overall
Sheath
Strands*
Phase AC
Phase AC
Diameter
of
AC
of
Note :Available in 100 meters length with black outer sheath & in bigger packing on request. Any colour on specific request can be
supplied, in economical run.
*The number and diameter of conductor strands are for reference only. Conductor resistance as per IS:8130 is the governing criteria.
PVC INSULATED CCTV CABLE S 75 Ohms.
CCTV Cables
We specialize in manufacturing CCTV Surveillance Cables with
crystal clear picture quality and safe and reliable transmission of
voice ,video and data.These are characterized by Multi-core
construction,75 Ohms Co-axial Cable for Video signal , Flexible wire
cores for audio signal & 12 V power supply, used for CC camera &
surveillance systems. Available in 3+1, 4+1, 6+1, 8+1 combination
or as per clients stipulation .
CONSTRUCTION
Tape Polyester
Overlapping 25%
Diameter 6.50 MM
TECHNICAL DATA
Sr.No. No.of No of Strands Cond. Size Overall dia. Cross sec. Area Max. Conductor
Cores SWG mm mm Sq mm Resistance at 20°C
1 3+1 7/36 0.193 6.0 0.2048 127
2 4+1 7/36 0.193 6.2 0.2048 127
3 6+1 7/36 0.193 7.2 0.2048 127
4 3+1 14/38 0.152 6.3 0.2542 81
5 4+1 14/38 0.152 6.4 0.2542 81
6 6+1 14/38 0.152 7.5 0.2542 81
7 3+1 14/40 0.122 6.2 0.164 130
8 4+1 14/40 0.122 6.3 0.164 130
9 6+1 14/40 0.122 6.8 0.164 130
PVC INSULATED ROUND DATA CABLES
CONSTRUCTION
Conductor Solid/Stranded/Flexible
Insulation PVC/HR/Polyethylene
Sheathing PVC/HR/FR/FRLS/Polyethylene
TECHNICAL DATA
No. Of
strands SWG 7/38 7/36 14/38 14/36
Size 26 AWG 24 AWG 23 AWG 21 AWG
Product Overview
Manhindayal Category 5e UTP Cables are manufactured, tested and verified to the ISO/IEC
11801 2nd Edition, EN 50173:2007 and ANSI/TIA-568-C.2 standards for enhanced
performance Category 5e cables. Each cable consists of 8 colour coded polyethelene
insulated conductors. These are twisted together to form 4 pairs with varying lay lengths.
These pairs, together with a strong nylon rip cord are jacketed in a heat resistantPVC
material. The printing detail on the sheath, includes the cables part number, specification
details and a unique 305-0 metre marking within each box supplied, allowing for quick and
easy measurement of cable installed and the amount remaining within the box. A choice of
jacket colour enables departmental or application identification where necessary.
Performance Overview
Mahindayal Category 5e cables are manufactured and tested to the Category 5 enhanced
standards as defined by the EIA/TIA and ISO standards’ bodies. Swept frequency tests are
applied to each critical performance characteristic,such as near end cross talk (NEXT) and far
end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual
performance exceeds the required standard by a considerable margin ensuring sufficient
headroom for even the most demanding applications.
TECHINCAL DATA
Frequency Insertion Loss NEXT Return Loss ACR-N ACR-F PS NEXT PS ACR-F
(MHZ) (dB) (dB) (dB) (dB) (dB) (dB) (dB)
1 2 62 20 60 64 62 64
4 3.8 53 23 49.2 52 53 51
10 6.5 47 25 40.5 44 47.3 44
16 8.2 44 25 35.8 39.9 44.2 40.9
20 9.2 43 25 33.8 38 42.8 39
31.25 11.7 40 23.6 38.3 34.1 39.9 35.1
62.5 17 35 21.5 18 28.1 35.4 29.1
100 22 32 20.1 10 24 32.3 25
Impedance (1-100 MHz) = 100 ± 15O
Category 5e UnscreenedTwisted Pair (U/UTP) Cable- External Grade
Product Overview
Manhindayal Category 5e UTP Cables are manufactured, tested and verified to the ISO & TIA
standards for enhanced performance Category 5e cables.Each cable consists of 8 colour coded
polyethelene insulated conductors. These are twisted together to form 4pairs with varying lay
lengths. These pairs, together with a strong nylon rip cord are jacketed in a heat and UV,moisture
resistant black polyethylene outer sheath, make this cable ideal for outdoor installation. The printing
detailon the sheath, includes the cables part number, specification details and a unique 305-0 metre
marking within each box supplied, allowing for quick and easy measurement of cable installed and
the amount remaining within the box.Due to the risk of lightning or over-voltage damage both ends of
the external cable must be fitted with equipment suitable of protecting the computer system and
operators from a direct or indirect lightning strike or other overvoltagesituation.. These devices are
available in many forms, but are usually system specific and you will need to contact the
manufacturer of these devices to ensure the requirements of the network is met. Manhindayal
recommends the use of optical fibre in all external cabling, and any damage to the cabling system
dueto lightning strikes or over-voltage is solely at the risk of the installer.
SPECIFICATION
1. Outer Sheath UV and Moisture Resistant Polyethylene
2. Nominal Overall Diameter 5.2mm
3. Installation Temperature Range: 0°C to +50°C
4. Operation Temperature Range -10°c to +60°c
5. Bend Radius 4 x overall diameter installed, 8x installing
6. Conductor Solid Copper
7. Conductor Insulator Solid Polyethylene
8. NVP 70%
TECHINCAL DATA
Frequency Impedance SRL Attenuation NEXT NEXT ELFEXT ELFEXT Velocity of
(MHZ) (Ohm) (dB) (dB/100m) Worst Pair (dB) Power Sum (dB) Worst Pair (dB) Power Sum (dB) Propagation (%)
0.772 — 1.8 67 64 — —
1.0 19 2.0 66 62 64 61
4.0 20.8 4.1 57 53 52 49
8.0 21.7 5.8 52 48 46 43
10.0 22 6.5 51 47 44 41 70
16.0 100 ± 15 22 8.2 48 44 40 37
20.0 22 9.3 46 42 38 35
25.0 21.3 10.4 45 41 36 33
31.25 20.6 11.7 43 39 34 31
62.5 18.5 17.0 39 35 28 25
100.0 17.1 22.0 36 32 24 21
Category 5e Screened Twisted Pair (F/UTP) Cable
Product Overview
Mahindayal Category 5e FTP Cables are manufactured, tested and independently verified to
the ISO11801 and EIA/TIA standards for enhanced performance Category 5e. Each cable
consists of 8 colour coded 24AWG polyethelene insulated conductors. These are twisted
together to form 4 pairs with varying lay lengths.These pairs are wrapped in an aluminium mylar
tape screen with a solid 24AWG drain wire and jacketed in a heat resistant PVC or low smoke
zero halogen rated material. The printing detail on the sheath, includes the cables part number,
specification details and sequential metre marking.
Performance Overview
Mahindayal Category 5e cables are manufactured to and tested to the current Category 5
enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency
tests are applied to each critical performance characteristic, such as near end cross talk
(NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are
applied. Actual performance exceeds the required standard by a considerable margin
ensuring sufficient headroom for even the most demanding applications.
TECHINCAL DATA
Frequency Impedance Return Attenuation NEXT NEXT ELFEXT ELFEXT Velocity of
(MHZ) (Ohm) Loss (dB) (dB/100m) Worst Pair (dB) Power Sum (dB) Worst Pair (dB) Power Sum(dB) Propagation (%)
0.772 — 1.8 67 64 — —
1.0 19 2.0 66 62 64 61
4.0 20.8 4.1 57 53 52 49
8.0 21.7 5.8 52 48 46 43
10.0 22 6.5 51 47 44 41
16.0 100 ± 15 22 8.2 48 44 40 37 70
20.0 22 9.3 46 42 38 35
25.0 21.3 10.4 45 41 36 33
31.25 20.6 11.7 43 39 34 31
62.5 18.5 17.0 39 35 28 25
100.0 17.1 22.0 36 32 24 21
Category 6 Unscreened Twisted Pair (UTP) Cable - PVC
Product Overview
Mahindayal Category 6 UTP cables are manufactured and tested to the TIA/EIA 568-B.2-1,
EN50173-1 and ISO/IEC 11801 Category 6 specifications. Each cable consists of 8 colour coded
23AWG polyethylene insulated conductors. These are twisted together to form 4 pairs with varying
lay lengths. These pairs are then formed around a central ‘X’ shaped polyethylene filler. This filler
assists in maintaining and enhancing the cables performance. The printing detail along the outer
sheath includes the cable part code, specification detail and our new 305 to 0 metre marked system.
As the cable is dispensed from the box the sequential marking counts down from 305 to 0 metres, as
well as reducing waste and accounting easily for cables installed, this innovative print legend finally
removes the guesswork from assessing the amount of cable remaining in partly used boxes.
SPECIFICATION
1. Overall Diameter 6.2mm
2. Installation Temperature Range 0°C to +50°C
3. Nominal Velocity of Propagation (NVP) 69%
4. Operation Temperature Range -10°c to +60°c
5. Bend Radius 4 x overall diameter installed, 8x during installation
TECHINCAL DATA
Freq Insertion Loss (dB) NEXT (dB) RL (dB) ACR-F (dB) PS NEXT (dB) PS ACR-F (dB)
(MHz) Standard MCAB* Standard MCAB* Standard MCAB* Standard MCAB* Standard MCAB* Standard MCAB*
1 - - - - 20 28 - - - - - -
4 3.8 3.6 66.3 83.7 23 37.2 56 83.4 63.3 77.7 53 73.3
10 6 5.7 60.3 67.6 25 41.8 48 75 57.3 66.5 45 63.7
16 7.6 7.3 57.2 70.1 25 48.4 43.9 70.6 54.3 66.8 40.9 57.2
20 8.5 8.2 55.8 71.9 25 46.3 42 64.9 52.8 63.9 39 55.1
31.25 10.7 10.3 52.9 63.4 23.6 38.2 38.1 66.1 49.9 61.6 35.1 55.9
62.5 15.5 14.7 48.4 60.9 21.5 35.8 32.1 46.6 45.4 59.4 29.1 45.2
100 19.9 18.8 45.3 56.2 20.1 29.5 28 43.1 42.3 54.3 25 39.3
200 29.1 27.2 40.8 55.1 18 24.9 22 38.9 37.8 51 19 34.9
250 33 30.2 39.3 50.9 17.3 23.8 20 29.3 36.3 50.5 17 26.3
*Typical Result
Nominal velocity of propagation (NVP 69%)
Category 6 Unscreened Twisted Pair (U/UTP) Cable - External Grade
Product Overview
Mahindayal Category 6 UTP cables are manufactured and tested to the TIA/EIA 568-B.2-1, EN50173-1 and
ISO/IEC 11801 Category 6 specifications. Each cable consists of 8 colour coded 23AWG polyethylene insulated
conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs are then formed
around a central ‘X’ shaped polyethylene filler. This filler assists in maintaining and enhancing the cables
performance. A jacket of UV and moisture resistant polyethelene is applied making this cable ideal for outdoor
installation. The printing detail along the outer sheath includes the cable part code, specification detail and our
new 305 to 0 metre marked system. As the cable is dispensed from the box the sequential marking counts down
from 305 to 0 metres, as well as reducing waste and accounting easily for cables installed, this innovative print
legend finally removes the guesswork from assessing the amount of cable remaining in partly used boxes. Due to
the risk of lightning or over-voltage damage both ends of the external cable must be fitted with equipment suitable
for protecting the computer system and operators from a direct or indirect lightning strike or other overvoltage
situation. These devices are available in many forms, but are usually system specific and you will need to contact
the manufacturer of these devices to ensure the requirements of the network is met. Mahindayal recommends
the use of optical fibre in all external cabling, and any damage to the cabling system due to lightning strikes or
over-voltage is solely at the risk of the installer.
SPECIFICATION
1. UV and Moisture Resistant Polyethylene Outer Sheath
2. Nominal Overall Diameter 6.3mm
3. Operation Temperature Range -10°c to +75°c
4. Bend Radius 4 x overall diameter installed, 8x installing
5. Conductor Solid Copper
6. Conductor Insulator Solid Polyethylene
7. ‘X’ Shaped Central Filler Polyethylene
8. NVP 70%
Product Overview
Manhindayl Category 6 F/UTP - foil screened - cables are manufactured and tested to the TIA-568-C.2, EN50173-1
andISO/IEC 11801 Category 6 specifications. Each cable consists of 8 colour coded 23AWG polyethylene insulated,solid
bare copper, conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs are then formed
around a central ‘X’ shaped polyethylene filler. This filler assists in maintaining and enhancing the cables performance. A
clear Mylar tape is then wrapped around this unit and a foil tape screen with 24AWG drain wire applied. The foil screen
provides protection from Electromagnetic Interference (EMI) which can occur when data is transmitted at high frequencies.
The printing detail along the outer sheath includes the cable part code, specification detail and our new 305 to 0 metre marked
system. As the cable is dispensed from the reel the sequential marking counts down from 305 to 0 metres, as well as reducing
waste and accounting easily for cables installed, this innovative print legend finally removes the guesswork from assessing
the amount of cable remaining on partly used reels.
SPECIFICATION
1. Overall Diameter 7.57mm
2. Installation Temperature Range 0°C to +50°C
3. Operation Temperature Range -10°c to +60°c
4. Minimum Bend Radius 4 x overall diameter installed, 8x during installation
5. Cable weight 5.08 Kg/100m
6. Cable jacket tested to IEC 62321, US EPA 3540C, BS EN 14582
7. ZHLS Properties ISO IEC 332-1
TECHINCAL DATA
Freq Insertion Loss (dB) NEXT (dB) RL (dB) ACR-F (dB) PS NEXT (dB) PS ACR-F (dB)
(MHz) Standard MCAB* Standard MCAB* Standard MCAB* Standard MCAB* Standard MCAB* Standard MCAB*
1 - - - - 20 28.6 - - - - - -
4 3.8 3.4 66.3 86.5 23 35.8 56 96.7 63.3 82.4 53 85.7
10 6 5.4 60.3 77.6 25 43.2 48 87.3 57.3 75.4 45 77.1
16 7.6 6.9 57.2 76.7 25 41.5 43.9 78.8 54.3 68.5 40.9 72.6
20 8.5 7.7 55.8 73.7 25 47.1 42 76.8 52.8 67.4 39 70.7
31.25 10.7 9.7 52.9 73 23.6 44.4 38.1 68.6 49.9 69.6 35.1 69.1
62.5 15.5 13.9 48.4 65.7 21.5 42.7 32.1 62.3 45.4 57.9 29.1 63.6
100 19.9 17.7 45.3 69.1 20.1 35 28 60.6 42.3 58.2 25 53.5
200 29.1 25.2 40.8 54 18 28.4 22 63.6 37.8 49.7 19 45.4
250 33 28.3 39.3 53.8 17.3 23.4 20 46.5 36.3 53.2 17 44.8
*Typical Result
Nominal velocity of propagation (NVP 83.6%)
Category 6A Screened Twisted Pair (U/FTP) Cable – LSOH
Product Overview
Mahindayal Category 6A – Augmented Category 6 – cables, and associated connectors, take the performance capabilities of
copper infrastructure to new levels. The cable has been designed to exceed the ISO/IEC, TIA and CENELEC for Category
6A/Augmented Category 6 component requirements. This delivers Class EA/ Augmented Category 6 link performance over
distances of up 90 metres which supports the applications including 10GBASE-T, 10 Gigabit Ethernet. Each cable consists of 4
pairs individually wrapped in a covering of high quality, strong, aluminium/polyester foil tape providing an individual screen for
each pair. These sub units are then cabled together, with the pairs set to different lay lengths to ensure optimum performance.
Mahindayal Category 6A cables are jacketed in an Ice Blue zero halogen low smoke (ZHLS) compound compliant with flame
retardant standards as defined in IEC 60332-1, and smoke emission standards IEC61034. Supplied on 500 metre plywood
drums, each cable has a print legend identifying the specification, part code and sequential metre marking which counts down
from 500 metres to 1 metre, on each drum to reduce waste.
Construction
1. Conductor 23AWG, Solid Plain Copper
2. Insulation Foamed Polyethylene
3. Screen applied to each pair unit Aluminium Foil Tape
4. Outer Sheath Flame resistant, Low Smoke Zero Halogen
5. Outer Diameter 7.25mm +/- 0.3mm
6. Installation Temperature Range 0°c to +50°c
7. Operating Temperature Range -10°c to +60°c
8. Minimum Bend Radius during installation 58mm
9. Minimum Bend Radius during operation 31mm
10. Flame Retardance IEC 60332-1
11. Smoke Emission IEC 61034
12. NVP 76%
13. Construction IEC 61156-5 ed2.0 Augmented Category 6A
14. Coupling Attenuation 30-100 MHz: = 55 dB
Performance Overview
Mahindayal Category 6A cables are designed, manufactured and tested in
accordance with the ISO and TIA standards for Cat 6A. As such they are
suitable for the support of high speed enterprise LAN and data centre
applications such as 10 Gigabit Ethernet. The use of high quality foil tape
screens in the design of this cable ensure that correctly installed systems JACKET
areimmune to performance concerns sometimes found in high speed, high SUB UNIT
frequency copper cable networks. Cables designed with pair and overall FOIL SCREEN
screening such as this act against Alien Crosstalk, the inducement of noise CONDUCTOR
from one 4 pair cable to an adjoining (or number of adjoining cables) as well INSULATION
as protecting against from signal loss though emissions and enabling
immunity from disturbance’s which could potentially be recieved from DRAIN WIRE
external sources such as other cables or electronic devices.
Technical Data
Ins. Loss Return Loss Pair to Pair Power Sum Po. Delay
Frequency (dB/100m) (dB) NEXT ACR-F NEXT ACR-F NEXT ELFEXT (ns/100)
(MHz) Max. Min. (dB/100m) (dB/100m)
Min. Min. Min. Min. Min. Min. (dB/100m)
Max.
1 2.1 2.0 76.3 71.8 74.3 69.8 75.0 75.0 570
10 6.0 25.0 61.3 51.8 59.3 49.8 72.5 58.2 538
16 7.6 25.0 58.2 47.7 56.2 45.7 70.5 54.1 536
20 8.5 25.0 56.8 45.8 54.8 43.8 69.5 52.2 536
31.25 10.8 23.6 53.9 41.9 51.9 39.9 67.6 48.3 535
62.5 15.5 21.5 49.4 35.9 47.4 33.9 64.5 42.3 535
100 19.9 20.1 46.3 31.8 44.3 29.8 62.5 38.2 534
200 29.2 18.0 41.8 25.8 39.8 23.8 58.0 32.2 534
250 33.0 17.3 40.3 23.8 38.3 21.8 56.5 30.2 534
300 36.6 16.8 39.1 22.3 37.1 20.3 55.3 28.7 534
400 43.2 15.9 37.3 19.8 35.3 17.8 53.5 26.2 534
450 46.3 15.5 36.5 18.7 34.5 16.7 52.7 25.1 534
500 49.2 15.2 35.8 17.8 33.8 15.8 52.0 24.2 534
Nominal velocity of propagation (NVP 76% Note 1: All tests include 401 points swept frequency measurements.
Note 2: All electrical characteristics are given at 20°C
Category 6A Shielded Twisted Pair (F/FTP) Cable – LSOH
Product Overview
Mahindayal Category 6A – Augmented Category 6 – cables, and associated connectors, take the performance capabilities
of copper infrastructure to new levels. The cable has been designed to exceed the ISO/IEC, TIA and CENELEC for
Category 6A/Augmented Category 6 component requirements. This delivers Class EA/ Augmented Category 6 link
performance over distances of up 90 metres which supports the applications including 10GBASE-T, 10 Gigabit Ethernet.
Each cable consists of 4 pairs individually wrapped in a covering of high quality, strong, aluminium/polyester foil tape
providing an individual screen for each pair. These sub units are then cabled together, with the pairs set to different lay
lengths to ensure optimum performance, an overall 360 degree foil tape screen plus drain wire is applied to provide further
immunity to outside noise and to mitigate any risk of alien cross talk.
Mahindayal Category 6A cables are jacketed in an Ice Blue zero halogen low smoke (ZHLS) compound compliant with
flame retardant standards as defined in IEC 60332-1, and smoke emission standards IEC61034. Supplied on 500 metre
plywood drums, each cable has a print legend identifying the specification, part code and sequential metre marking which
counts down from 500 metres to 1 metre, on each drum to reduce waste.
Construction
1. Conductor 23AWG, Solid Plain Copper
2. Insulation Foamed Polyethylene
3. Screen applied to 1 pair unit Aluminium Foil Tape
4. Screen applied to 4 pair unit Aluminium Foil Tape
5. Outer Sheath Flame resistant, Zero Halogen Low Smoke
6. Outer Diameter 7.7mm +/- 0.3mm
7. Installation Temperature Range 0c0 to +50c0
8. Operating Temperature Range -10c0 to +60c0
9. Minimum Bend Radius during installation 32mm
10. Minimum Bend Radius during operation 32mm
11. Flame Retardance IEC 60332-1
12. Smoke Emission IEC 61034
13. NVP 76%
14. Construction IEC 61156-5 ed2.0 Augmented Category 6A
15. Coupling Attenuation 30-100 MHz: = 55 dB
Thermal Power Stations · Industries · Oil Reneries · Electricity Boards · Telecommunications · Nuclear Plants
Products at a Glance
· “Mahindayal” Single Core Flexible unsheathed / Sheathed Cables PVC Insulated (FR/FR-LSH/ZHLS) with copper conductor, 1100 volts
confirming to IS:694.
· “Mahindayal” Multi Core Round Flexible PVC insulated & PVC Sheathed Cables with copper conductor, 1100 volts confirming to IS:694.
· “Mahindayal” Three Core Flat Flexible PVC Insulated PVC Sheathed Cable for submersible with copper conductor, 1100V confirming to
IS:694.
· “Mahindayal” PVC insulated Telephone cable for indoor applications confirming to TEC Specifications G/WIR06/02.
· “Mahindayal” CATV Co-axial/CCTV Cable-75 Ohms.
· “Mahindayal” Computer Cable for networking & DSL Wiring
· “Mahindayal” PVC Screened/instrumentation Cable Armoured/Unarmoured Confirming to DIN-VDE0815/BS 5308, IS:5608.
· “Mahindayal” Thermocouple Extension and Thermocouple compensating cables.
· “Mahindayal” Single Core/Multi Core, Round/Flat PVC insulated, PVC Sheathed with aluminium conductor, 1100 volts confirming to IS:694.
· “Mahindayal” XLPE/PVC insulated PVC sheathed (heavy duty) armoured/unarmoured electric cables with aluminium/copper conductor for
working voltage 1100 volts to IS:7098 (Part-I) IS:1554 (Part-I) as applicable.