Professional Documents
Culture Documents
MC-7884
870 MHz CATV 25 dB POWER DOUBLER AMPLIFIER
D
DESCRIPTION
The MC-7884 is a GaAs Multi-chip Module designed for use in CATV applications up to 870 MHz. This unit has
UE
low distortion, low noise figure and return loss across the entire frequency band.
Reliability and performance uniformity are assured by our stringent quality and control procedures.
FEATURES
• Low distortion
• High linear gain GL = 25.0 dB MIN. @ f = 870 MHz
• Low return loss
Part Number
MC-7884
IN Order Number
MC-7884-AZ
Package
25 pcs MAX./Tray
NT
(Pb-Free)
Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
D
Operating Case Temperature TC 30 +25 +85 C
UE
Parameter Symbol Test Conditions MIN. TYP. MAX. Unit
Operating Current
Cross Modulation
CTB
XM
CSO
RF OFF
110 channel,
360
60
55
63
mA
dBc
dBc
dBc
NT
Input Return Loss 1 RLi1 f = 40 to 160 MHz 20 dB
PACKAGE DIMENSIONS
D
UE
IN
NT
PIN CONNECTION
O
SC
DI
D
(to prevent undesired oscillation)
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
UE
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Note
Partial Heating Peak temperature (pin temperature) : 350C or below
Soldering time (per pin of device) : 3 seconds or less
IN
Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead.
NT
O
SC
DI
D
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
UE
IN
NT
O
SC
DI