Professional Documents
Culture Documents
Catalogue 52 KV v13
Catalogue 52 KV v13
CATALOGUE 2019
NEXANS NETWORK SOLUTIONS DIV. EUROMOLD
COMPANY PRESENTATION
While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility
can be accepted for any inaccuracy. Nexans Network Solutions N.V. - Div. Euromold reserves the right to alter or
modify the characteristics of its products described in this catalogue as standards and technology evolve.
TABLE OF CONTENTS
Test report
AFN 52 - Slip-on termination
52TTGI1 - Heat-shrinkable indoor termination
52TTGE1 - Heat-shrinkable outdoor termination
52GTS1 - Heat-shrinkable straight joint
Accessories F interface
Q909TB - Tee connector
Q909PB - Coupling tee connector
Q900AR-1/-2 - Equipment bushing
Cable arrangements & testing
04/2019
TEST REPORT
Tested accessories:
Combination of separable tee connector and coupling connector with "F" interface on Q900AR-1 bushings and with
outdoor terminations AFN 52-6-D (described in the test report as AFNP 36-6).
AFN 52 SLIP-ON TERMINATION
APPLICATION
A termination for indoor and
outdoor use (up to pollution class
d) and exposed to prolonged
sunshine and other weather
conditions.
Terminations for pollution class e
on request. To connect polymeric
insulated cable to equipment,
overhead lines or busbars.
SPECIFICATIONS AND
STANDARDS 4
Type tested according to IEC
60840. Creepage distance 5
according to EN50124-1, IEC/
6
TS 60815-3 pollution class d,
IEC60112-CTI>600.
Note:
Distance depends on
7
the cable lug used. See
also table X.
4
KIT CONTENTS
A kit always comprises 1 sealing mastic, adhesive tape,...
termination housing, 1 or 2 An earthing lug is not included
modules with sheds, cable lug, in the standard kit, but can be
water sealing sleeve, installation ordered separately.
instructions, special lubricant,
wiper, earthing clamp, water
according to the conductor size 31.5 41.0 15 660 135 1325 AFN 52-4-D-X
39.0 50.0 15 660 135 1325 AFN 52-5-D-X
and type.
52 46.0 58.0 15 660 135 1325 AFN 52-6-D-X
53.0 60.0 13 660 180 1455 AFN 52-7-D-X
59.0 67.0 13 660 180 1455 AFN 52-8-D-X
66.0 73.0 13 660 180 1455 AFN 52-9-D-X
72.0 82.0 13 660 180 1455 AFN 52-10-D-X
EXAMPLE:
One outdoor termination for a TABLE X
52 kV - 630 mm2 stranded
aluminium cable with copper wire Con- Aluminium and Copper
Aluminium conductor
screen with a bolted cable core ductor copper conductor conductor Distance K
lug, with cable core lug to be used (typical)
sizes
Deep DIN DIN (mm)
in a d-pollution class environment. (mm2)
indent hexagonal
Bolted
hexagonal
The diameter over core insulation
is 50 mm. Order a AFN 95 CAA 95-M 12 95x12 ALU-F-V 95x12 KU-F-V
52-6-D+C400-630x16
C95-240x16
800 - - -
1000 - - -
1200 - - -
For use with copper For use with For other pullution For use with other Other cable lugs on No heating or flame
wire screened cables. copper tape classes. cable types. request. is required.
No earthing screened cables. Please contact our Please contact our
device is Order: -/MT. representative. representative.
necessary.
5
CREEN
p to 26/45 (52) kV
APPLICATION TECHNICAL
The 52TTGI1 heat-shrinkable CHARACTERISTICS
indoor terminations are designed A stress control patch is applied at
for plastic or EPR insulated cables the screen cut of the termination
with Cu wire screen or Cu tape and helps to control the field
screen. together with stress control tubing.
Semiconductive tubing creates a
bridge for leakage currents placed
onto and covering the screen wires
or earth braid.
Another layer of stress control
mastic covers the top end of the
semiconductive tubing.
Red anti-tracking mastic is
wrapped onto the top end of the 26/45 (52) kV
tubing.
The lug and cable outer sheath is
sealed with anti-tracking mastic. Meets specifications:
Heavy wall anti-tracking tube and IEC 60840
anti-tracking rain sheds complete
the termination.
For cables with AL Please add a the Earth kit included For other cable Trifurcating kits “TK” Various earth Design Various earth
foil screen/ vapor letter “A” at the end for cables with types please contact available separately. connection design accommodates connection kits are
screen please of the product code wire screens. our sales office. Please see available solutions exist for various lug types. available for screen
contact our sales for cables with Cu sizes of specific armoring. For exact connection. For
office. tape screen. catalogue page. details contact our exact details contact
sales office. our sales office.
04/2019
6
TAPE SCREEN
Up to 26/45 (52) kV
HEAT-SHRINKABLE
OUTDOOR TERMINATION 52TTGE1
APPLICATION TECHNICAL
The 52TTGE1 heat-shrinkable CHARACTERISTICS
outdoor terminations are designed A stress control patch is applied at
for plastic or EPR insulated cables the screen cut of the termination
with Cu wire screen or Cu tape and helps to control the field
screen. together with stress control tubing.
Semi-conductive tubing creates a
bridge for leakage currents placed
onto and covering the screen wires
or earth braid.
An other layer of stress control
mastic covers the top end of the
semiconductive tubing.
Red anti-tracking mastic is
wrapped onto the top end of the
26/45 (52) kV
tubing.
The lug and cable outer sheath is
sealed with anti-tracking mastic.
Meets specifications: Heavy wall anti-tracking tube and
IEC 60840 anti-tracking rain sheds complete
the termination.
Designed for For cables with AL Please add a the Earth kit included For other cable Trifurcating kits “TK” Various earth Design Various earth
outdoor application. foil screen/ vapor letter “A” at the end for cables with types please contact available separately. connection design accommodates connection kits are
screen please of the product code wire screens. our sales office. Please see available solutions exist for various lug types. available for screen
contact our sales for cables with Cu sizes of specific armoring. For exact connection. For
office. tape screen. catalogue page. details contact our exact details contact
sales office. our sales office.
WIRE / TAPE SCREEN
Up to 26/45 (52) kV
52GTS1 HEAT-SHRINKABLE
STRAIGHT JOINT
APPLICATION TECHNICAL
52GTS1 straight joint are CHARACTERISTICS
designed for unarmored plastic NGS semi-conductive tape is
or HEPR insulated cables with Cu used to fill the gaps, cover the
wire screen. connector.
The screen cut on both sides are
covered with stress grading mastic
plates as well as the connector
area.
The joint body consists of a stress
control tubing, an insulating,
heavy wall tubing and finally
heavy dual wall screened
insulating tube.
The outer sheath is restored with 26/45 (52) kV
GT4 adhesive lined heavy wall
tubing.
Meets specifications:
IEC 60840
For cables with AL Please add a the letter Earth kit included For other cable Please contact our Various earth Design accom- Various earth
foil screen/ vapor “A” at the end for cables with types please contact sales office when connection design modates various connection kits are
screen please of the product code for wire screens. our sales office. inquiring joints for solutions exist for connector/ferrule available for screen
contact our sales cables with Cu tape same type cables armoring. For exact types. connection. For
office. screen. with different cross details contact our exact details contact
sections. sales office. our sales office.
04/2019
8
ACCESSORIES
900GP-B 900GP-SBT
APPLICATION TECHNICAL
Separable tee shape connector CHARACTERISTICS
(bolted type) designed to connect • The thick conductive EPDM jacket
polymeric insulated cable provides a total safe to touch
to equipment (transformers, screen which ensures safety for
switchgear, motors, ...). personnel.
Also connects cable to cable when • Each separable connector is
using the appropriate mating tested for AC withstand and
parts. partial discharge prior to leaving
the factory.
250 mm
DESIGN 26/45 (52) kV
Separable connector
comprising:
1. Conductive EPDM insert. 1250 A
2. Conductive EPDM jacket.
3. Insulating EPDM layer
8
moulded between the insert 4 9
SPECIFICATIONS AND
STANDARDS
The Q909TB separable connector
is type tested according IEC
60840.
10
KIT CONTENTS
The complete Q(M)(H)909TB/G The kit also comprises silicone grease,
tee connector kit comprises 1x the watersealing mastic, gloves, roll adhesive
tape, heatshrink sleeve, installation
following components: instructions and crimp chart.
Q(M)(H)909TB/G-S-
W-X
connector kit
Basic insulating
plug
Connector housing Stud+nut+ Conductor contact Q900BIPA Cable reducer
Q909BT/G washer 900TBC-X + rubber cap Q972CA-W
TABLE W
ORDERING INSTRUCTIONS
Order QM909TB or QH909TB Ordering Dia. over core insulation (mm)
depending on the connector part number min max
routine test required (see table Y). Q(M)(H)909TB/G-S-25-X 27.0 33.5
To order the tee connector, select Q(M)(H)909TB/G-S-30-X 32.5 41.0
the ordering part number which Q(M)(H)909TB/G-S-37-X 40.0 48.0
Q(M)(H)909TB/G-S-43-X 46.5 51.0
gives the best centring of the core
Q(M)(H)909TB/G-S-46-X 49.5 55.0
insulation diameter and substitute Q(M)(H)909TB/G-S-50-X 54.0 59.0
X using table X, according to the Q(M)(H)909TB/G-S-53-X 57.0 64.0
conductor size and type. Q(M)(H)909TB/G-S-58-X 62.5 68.0
TABLE X
EXAMPLE:
The copper wire screened cable Aluminium and Copper
is 52 kV, 1000 mm2 stranded Conduc- Aluminium conductor
copper conductor conductor
tor sizes
aluminium with a diameter over (mm2) Deep DIN DIN
core insulation of 58 mm. Bolted
indent hexagonal hexagonal
Order 95 95KM-12-1 95KM-12-2 95(K)M-11-2
QM909TB/G-S-53-1000(K)M-12- 120 120KM-12-1 120KM-12-2 120(K)M-11-2
1 tee connector kit. 150 150KM-12-1 150KM-12-2 95.240-14-5 150(K)M-11-2
185 185KM-12-1 185KM-12-2 185(K)M-11-2
TABLE Y 240 240KM-12-1 240KM-12-2 240(K)M-11-2
185.400-14-5
300 300KM-12-1 300KM-12-2 300(K)M-11-2
Type Partial AC 400 400KM-12-1 400KM-12-2 400(K)M-11-2
discharge voltage
extinction 500 500KM-12-1 500KM-12-2 400.630-14-5 500(K)M-11-2
QM909TB 5 Pc @ 52 kV 1' @ 97 kV 630 630KM-12-1 630KM-12-2 630(K)M-11-2
800 800KM-12-1 - 800(K)M-11-2
1' @ 115 kV
1000 1000KM-12-1 - 800.1200-14-5 1000(K)M-11-2
QH909TB 5 Pc @ 52 kV +
30' @ 90 kV 1200 1200KM-12-1 - 1200(K)M-11-2
For use with copper For use with Components can be ordered When installed on an
wire screened cables. other cable types. individually. appropriate equipment
No earthing Please contact our bushing:
device is representative. 1250 A continuously.
necessary.
11
Q909PB INTERFACE F
COUPLING CONNECTOR
APPLICATION TECHNICAL
Separable coupling connector CHARACTERISTICS
(bolted type) for dual cable • The thick conductive EPDM jacket
arrangement. It has been provides a total safe to touch
designed to be used with Q909TB screen which ensures safety for
separable tee connector. personnel.
• Each separable connector is
tested for AC withstand and
partial discharge prior to leaving
the factory.
DESIGN 425 mm
VD point).
7. Cable reducer.
8. Conductive rubber cap.
9. Stud+nut+washer.
10. Earthing lead. 10
SPECIFICATIONS AND
STANDARDS
The Q909PB coupling connector
is type tested according IEC
60840.
12
KIT CONTENTS
The complete Q(M)(H)909PB/G The kit also comprises silicone grease,
tee connector kit comprises the watersealing mastic, gloves, roll adhesive
tape, heatshrink sleeves, installation
following components: instructions and crimp chart.
Q(M)(H)909PB/G-S-
W-X
coupling connector kit
TABLE W
ORDERING INSTRUCTIONS
Order QM909PB or QH909PB de-
Ordering Dia. over core insulation (mm)
pending on the connector routine
part number min max
test required (see table Y). To order
the tee connector, select the order- Q(M)(H)909TB/G-S-25-X 27.0 33.5
Q(M)(H)909TB/G-S-30-X 32.5 41.0
ing part number which gives the
Q(M)(H)909TB/G-S-37-X 40.0 48.0
best centring of the core insulation Q(M)(H)909TB/G-S-43-X 46.5 51.0
diameter and substitute X using Q(M)(H)909TB/G-S-46-X 49.5 55.0
table X, according to the conductor Q(M)(H)909TB/G-S-50-X 54.0 59.0
size and type. Q(M)(H)909TB/G-S-53-X 57.0 64.0
Q(M)(H)909TB/G-S-58-X 62.5 68.0
EXAMPLE: TABLE X
The copper wire screened cable
is 52 kV, 1000 mm2 stranded Aluminium conductor
Aluminium and Copper
Conduc- copper conductor conductor
aluminium with a diameter over tor sizes
core insulation of 58 mm. (mm2) Deep DIN DIN
Bolted
Order indent hexagonal hexagonal
QM909PB/G-S-53-1000(K)M-12-1 95 95KM-12-1 95KM-12-2 95(K)M-11-2
tee connector kit. 120 120KM-12-1 120KM-12-2 120(K)M-11-2
150 150KM-12-1 150KM-12-2 95.240-14-5 150(K)M-11-2
185 185KM-12-1 185KM-12-2 185(K)M-11-2
TABLE Y
240 240KM-12-1 240KM-12-2 240(K)M-11-2
185.400-14-5
Type Partial AC 300 300KM-12-1 300KM-12-2 300(K)M-11-2
discharge voltage 400 400KM-12-1 400KM-12-2 400(K)M-11-2
extinction 500 500KM-12-1 500KM-12-2 500(K)M-11-2
400.630-14-5
QM909TB 5 pC @ 52 kV 1' @ 97 kV
630 630KM-12-1 630KM-12-2 630(K)M-11-2
1' @ 115 kV 800 800KM-12-1 - 800(K)M-11-2
QH909TB 5 pC @ 52 kV + 1000 1000KM-12-1 - 800.1200-14-5 1000(K)M-11-2
30' @ 90 kV
1200 1200KM-12-1 - 1200(K)M-11-2
1800 A
For use with copper For use with Components can be When installed on an When in a daisy chain
wire screened cables. other cable types. ordered individually. appropriate equipment arrangement or
No earthing Please contact our bushing: similar:
device is representative. 1250 A continuously. 1800 A continuously.
necessary.
13
Q900AR-1/Q900AR-2 INTERFACE F
EQUIPMENT BUSHING
APPLICATION TECHNICAL
Moulded epoxy insulated CHARACTERISTICS
bushings for use in equipment, • Each bushing is tested for
typically for transformers, AC withstand and partial
switchgear, capacitors... discharge prior to leaving
the factory.
SPECIFICATIONS AND
STANDARDS
The bolted type equipment 26/45 (52) kV
bushings Q900AR-X are moulded 110.5
A
Dia. 110+50
ORDERING INSTRUCTIONS B
Type Partial AC
discharge voltage
extinction
QM900AR-X 5 pC @ 52 kV 1' @ 97 kV
1' @ 115 kV
QH900AR-X 5 pC @ 52 kV +
30' @ 90 kV
04/2019
14
FIXINGS FOR EQUIPMENT BUSHINGS
Q900AR-X/J BUSHING
bushing interface
fixing flange
Min. 60
Max. 30
stud clamp
equipment
connection
earth
plate earth
jumper
15
POSSIBLE ARRANGEMENTS
Q909TB/G Q909TB-P2
Single cable arrangement. Dual cable arrangement.
250 mm 425 mm
150 mm Q900BIPA 325 mm max.
Q900BIPA
basic
basic
insulating
plug insulating
plug
Q909PB
coupling connector
CABLE TESTING
AFN
test cable
Note:
Test cable has to be supported. The weight of the test cable must not be borne by the connection bushing/TB connector.
04/2019
16
Nexans Power Accessories
power.accessories@nexans.com
www.nexans.com/power_accessories
04/2019