Professional Documents
Culture Documents
DSR REPORT
Name Bhavan Dept 2021-22 Year 2021-2022
17243 21-1 Excavation for foundation in earth, soil of all types, sand, gravel 228.00 Cu.M
0 and soft murum, including removing the excavated material up
to a distance of 50 m. beyond the building area and
stacking and spreading as directed, dewatering, preparing the
bed for the foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete. (Lift upto
1.50 m.) By Manual Means
17243 21-2 Excavation for foundation in earth, soil of all types, sand, gravel 191.00 Cu.M
1 and soft murum, including removing the excavated material up
to a distance of 50 m. beyond the building area and
stacking and spreading as directed, dewatering, preparing the
bed for the foundation and necessary back filling, ramming,
watering including shoring and strutting etc. complete. (Lift upto
1.5 m.) By Mechanical Means
17243 21-3 Excavation for foundation in earth, soils of all types, sand,gravel 300.00 Cu.M
2 and soft murum, including removing the excavated material upto a
distance of 50 metres beyond the building area and stacking and
spreading as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift from 1.5m to
3.0m) By Manual Means
17243 21-4 Excavation for foundation in earth, soils of all types, sand,gravel 238.00 Cu.M
3 and soft murum, including removing the excavated material upto a
distance of 50 metres beyond the building area and stacking and
spreading as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift from 1.5m to
3.0m) By Mechanical Means
17243 21-5 Excavation for foundation in hard murum including removing 348.00 Cu.M
4 the excavated material upto distance of 50 metres beyond
the building area and stacking and spreading as directed,
dewatering, preparing the bed for the foundation and
necessary back filling, ramming, watering including shoring and
Bhavan Dept 2021-22 strutting etc. complete.
- 2021-2022 - (Lift upto
Page 1.50 m) By Manual Means
1 of 350 22/04/21 3:36
22/04/2021 - 21
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17244 21-22 Providing preconstructional antitermite treatment as per I.S. 90.00 Sq.m
7 6313 (Part-II) by treating the bottom surface and sides of
excavation at the rate of 5 litres of emulsion concentrate of 1.0
percent of chlorophyrifos per square meter of surface area
covering 10 years guarantee on bond paper.
17244 21-23 Providing preconstructional antitermite treatment as per I.S. 95.00 Sq.m
8 6313 (Part-II) treatment by treating the backfill in immediate
contact with foundation at the rate of 5 litres of emulsion
concentrate of 1.0 percent of clorophyrifos per square metre of
vertical surface area covering 10 years guarantee on bond paper.
17244 21-24 Providing preconstructional antitermite treatment as per I.S. 6313 91.00 Sq.m
9 (Part-II) by treating the top surface of plinth filling at the rate
of 5 litres of emulsion concentrate at 1.0 percent of
clorophyrifos per square metre of surface area covering ten years
guarantee on bond paper.
17245 21-25 Providing preconstructional antitermite treatment as per I.S. 6313 149.00 Sq.m
0 (Part-I) to the soil along the external face of building by punching
holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm
c/c as close to the wall as possible and to inject 0.5
percent of aldrin or clorophyrifos at the rate of 7.5 litres per
hole and sealing the same with proper filling and covering 10
years guarantee on bond paper.
17245 21-26 Providing antitermite treatment to the wooden frames of 64.00 Per No
1 doors/windows of the existing building as per I.S. 6313 (Part-III)
by drilling 6mm dia. holes at four corners on one side and four
corners on other side at a downward angle of about 45 degree at
the junction of wood work and masonary and injecting 150 ml. of
chlorodane 5% W.C. and sealing by filling putty etc. complete
covering 2 years guarantee on bond paper.
17245 21-27 Providing antitermite treatment to the joints of wooden 50.00 Per No
2 beams/joist used for the roof work of the existing building as
per I.S. 6313 (Part-III) by drilling 6mm dia. holes at a
downward angle of about 45 degree at the junction of wood work
and masonary and injecting 80 ml. of chlorodane 5% W.C. and
sealing by filling putty etc. complete covering 2 years guarantee on
bond paper.
17245 21-28 Providing antitermite treatment to the sides of flooring of 23.00 Per No
3 the existing building as per I.S. 6313 (Part-III) by punching
holes 6mm dia. drilled at a distance of 30cm. centre to centre and
injecting one percent of chlorodane emulsion concentrate at the
rate of 50 ml per hole and sealing by filling putty etc. complete
covering 2 years guarantee on bond paper.
Bhavan Dept 2021-22 - 2021-2022 - Page 4 of 350 22/04/21 3:36
22/04/2021 - 21
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17246 22-1 Providing and laying cast in situ / Ready Mix Cement Concrete 820.00 Rmt
5 M-20 RCCsingle rim bored pile of 225 mm dia. each of load
capacity as per design and of specified diameter of pile and bulb as
directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully
automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by tremie arrangement, compaction of concrete including
chipping and dressing including chipping and dressing if required
etc. complete. (Excluding steel reinforcement)
17246 22-2 Providing and laying cast in situ / Ready Mix Cement Concrete of 1,063.00 Rmt
6 M2O grade RCC single rim bored pile of 300 mm dia. each of load
capacity as per design and of specified diameter of pile and bulb as
directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully
automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)
etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangement compaction of concrete including chipping
and dressing etc. complete. (Excluding steel reinforcement)
17246 22-3 Providing and laying cast in situ / Ready Mix Cement Concrete 1,384.00 Rmt
7 M-20 for single rim bored pile of 380 mm dia. each of load
capacity as per design and of specified diameter of pile and bulb as
directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully
automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by tremie arrangement compaction of concrete including
chipping and dressing etc. complete. (Excluding steel
reinforcement)
17246 22-4 Providing and laying cast in situ / Ready Mix Cement Concrete 1,787.00 Rmt
8 M-20 for single rim bored pile of 450 mm dia. each of load capacity
as per design and of specified diameter of pile and bulb as
directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully
automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by tremie arrangement compaction of concrete including
chipping and dressing etc. complete. (Excluding steel
Bhavan Dept 2021-22 reinforcement)
- 2021-2022 - Page 6 of 350 22/04/21 3:36
22/04/2021 - 22
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
reinforcement)
17248 22-20 Providing and laying cast in situ / Ready Mix Cement Concrete 5,772.00 Rmt
4 M-25 for in situ double rim bored pile of 600 mm dia. each of load
capacity as per design and of specified diameter of pile and bulb
as directed, sunk to the required depth through all strata
except rock, excluding provision of reinforcement including
placing with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by concrete prepared in reversible drum type
concrete mixer by tremie arrangement, compaction of concrete
including chipping and dressing etc. complete.concrete prepared in
reversible drum type concrete mixer by tremie arrangement,
compaction of concrete including chipping and dressing etc.
complete. (Excluding steel reinforcement)
17248 22-21 Providing and laying cast in situ / Ready Mix Cement Concrete 2,826.00 Rmt
5 M-30 for bored piles each of load capacity and as per design and of
325 mm diameter or as directed placed through steel shells sunk
to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings
and design approved by the Engineer-in- charge including
placing with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by concrete prepared by tremie
arrangement, compaction of concrete including chipping and
dressing etc. complete. concrete by tremie arrangements,
compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
17248 22-22 Providing and laying cast in situ / Ready Mix Cement Concrete 2,888.00 Rmt
6 M-30 for bored piles each of load capacity and as per design and
of 350mm diameter or as directed placed through steel shells
sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings
and design approved by the Engineer-in- charge
includingplacing with fully automatic micro processor based
PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade) by tremiearrangements,
compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel
reinforcement)
Rate In (Rs)
Item Description Rate Unit
17248 22-23 Providing and laying cast in situ / Ready Mix Cement Concrete 3,029.00 Rmt
7 M-30 for bored piles each of load capacity and as per design and
of 400 mm diameter.or as directed placed through steel shells
sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings
and design approved by the Engineer-in- charge including
placing with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangements, compaction of
concrete including chipping and dressing and withdrawal of
shell etc. complete. (Excluding steel reinforcement)
17248 22-24 Providing and laying cast in situ / Ready Mix Cement Concrete 3,103.00 Rmt
8 M-30 for bored piles each of load capacity and as per design and
of 425mm diameter or as directed placed through steel shells
sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings
and design approved by the Engineer-in- charge including
placing with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangements, compaction of
concrete including chipping and dressing and withdrawal of
shell etc. complete. (Excluding steel reinforcement)
17248 22-25 Providing and laying cast in situ / Ready Mix Cement Concrete 3,299.00 Rmt
9 M-30 for bored piles each of load capacity and as per design and
of 475mm diameter or as directed placed through steel shells
sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings
and design approved by the Engineer-in- charge including
placing with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangements, compaction of
concrete including chipping and dressing and withdrawal of
shell etc. complete. (Excluding steel reinforcement)
17249 22-26 Providing and laying cast in situ / Ready Mix Cement Concrete 3,711.00 Rmt
0 M-30 for bored piles each of load capacity and as per design and
of 500mm diameter or as directed placed through steel shells
sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings
and design approved by the Engineer-in- charge including
placing with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
Bhavan Dept 2021-22 - 2021-2022 - Page 12 of 350 22/04/21 3:36
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
22/04/2021 - 22
sand VSI Grade) by tremie arrangements, compaction of
concrete including chipping and dressing and withdrawal of
shell etc. complete. (Excluding steel reinforcement)
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17252 23-1 Providing and fabricating structural steel work in rolled sections 79,735.00 MT
6 like joists, channels, angles, tees etc. as per detailed design
and drawings or as directed including cutting, fabricating,
hoisting, erecting, fixing in position making riveted /
bolted /welded connections without connecting plates, braces
etc. and including one coat of anticorrosive paint and over it two
coats of oil painting of approved quality and shade etc. complete.
17252 23-2 Providing and fabricating structural steel work in rolled sections, 76,058.00 MT
7 fixed with connecting plates or angle cleats in main and cross
beams, hip and jack rafters, purlins connecting to truss
members and the like, as per detailed designs and drawing or as
directed including cutting, fabricating, hoisting, erecting, fixing in
position, making riveted/ bolted/ welded connections and one coat
of anticorrosive paint and over it two coats of oil painting of
approved quality and shade etc. complete.
17252 23-3 Providing structural steel work in single stanchions composed 75,683.00 MT
8 of R.S.J. Channel etc. with caps, bases, mild steel plated,
angle brackets, cleats, gusset plates, anchor bolts etc. as
per detailed designs and drawings or as directed including cutting,
fabrication, hoisting, erecting fixing in position, making riveted/
bolted/ welded connection and one coat of anticorrosive paint
and over it two. coats of oil painting approved quality and shade
etc. complete.
17252 23-4 Providing structural steel work in trusses, other similar trussed 96,415.00 MT
9 purlins and members with all bracing, gusset plates etc. as per
detailed designs and drawings or as directed including cutting,
fabricating, hoisting, erecting fixing in position, Making
riveted/ bolted/ welded connection and one coat of anticorrosive
paint and over it 2 coats of oil painting approved quality and
shade etc. complete.
17253 23-5 Providing and fixing 50 mm. dia. medium class G.I.pipe gate with 6,711.00 Sq.m
0 wicket gate of approved drawing with all fixtures and fittings in
two leaves with strong hold fast embedded in c.c. block at top
and bottom with locking arrangement including cutting, bending,
making holes and with one coat of primer etc. complete.
17253 23-6 Providing and erecting structural steel for sakav with all 1,01,631.00 MT
1 bracing gusset plates etc. as per detailed design and drawing
or as directed including cutting, fabricating, hoisting, erecting,
fixing in position, making riveted/ bolted/welded connection and oil
painting with 2 coats of approved quality and shade etc. complete.
complete.
Bhavan Dept 2021-22 - 2021-2022 - Page 20 of 350 22/04/21 3:36
22/04/2021 - 23
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
complete.
17253 23-7 Providing, fabricating and erecting at site of work the tubular 89,616.00 MT
2 steel structure (shed) as per standard design and specifications
having various spans in between trusses and in multiples of
standard length of bays as specified as per standard specifications,
inclusive of cost of steel tubular trusses, tubular columns purlins,
tie runners, foundation bolts, base plates, nuts and bolts, welding
wherever required etc. as per detailed drawing inclusive of
one coat of anticorrosive paint and two coats of oil painting of
approved quality and shade etc. complete. Spec. Number : As
directed by Engineer-in-charge.
17253 23-8 Providing Gas or Electrical welding for structural steel section, 11.00 Cm
3 plates as per detailed drawing.
For less than 10 mm thick section.
17253 23-9 Providing and fixing mild steel grill gate as per the detailed 2,013.00 Sq.m
4 drawing including hinges, locking arrangements and painting in
three coats of oil paint of approved colour and shade etc.
complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.)
Spec.Number: As directed by Engineer- in-charge.
17253 23-11 Providing structural steel work of rectangular hollow steel 97,178.00 MT
5 section for steel trusses, other similar trussed items like
purlin and members with all bracing, gusset plates etc. as
per detailed designs and drawings or as directed including cutting,
fabricating, hoisting, erecting, fixing in position making
riveted/bolted/ welded connections and one coat of
anticorrosive paint and over it two coats of oil painting of approved
quality and shade complete.
Spec. Number : As directed by Engineer-in-charge.
17253 23-12 Providing structural steel work in hollow section of various 1,02,403.00 MT
6 thickness and sizes in square, rectanular and round shape from
25mm to 450mm section as per IS 4923 YST 310 Grade produced
from iron ore and blast furnace route etc. as per detailed designs
and drawing or as directed including cutting, fabricating,
hoisting, erecting, fixing in position, making riveted/bolted/
welded connections and painting complete.
Specification:
17253 24-1 Providing and laying Cast in situ/Ready Mix cement concrete 6,204.00 Cu.M
7 in M-10 of trap/ granite/ quartzite/ gneiss metal for
foundation and bedding including bailing out water, Steel
centering, formwork, laying/pumping, compacting, roughening
them if special finish is to be provided, finishing if required and
curing complete, with fully automatic micro processor based
PLC with SCADA enabled reversible Drum Type mixer/concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
17253 24-4 Providing and laying Cast in situ/Ready Mix cement 6,617.00 Cu.M
8 concrete in M15 of trap/ granite/quartzite/gneiss metal for
steps including steel centering, formwork, laying/pumping,
compacting, roughening them if special finish is to be
provided, finishing uneven and honeycombed surface and curing
etc. complete. The Cement Mortar 1:3 plaster is considered for
rendering uneven and honeycombed surface, only. Newly laid
concrete shall be covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering will not be allowed.),with fully automatic
micro processor based PLC with SCADA enabled
reversible Drum Type mixer/concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade)
17253 24-6 Providing and laying Cast in situ/Ready Mixcement 6,926.00 Cu.M
9 concrete in M20 of trap/ granite/quartzite/gneiss metal for
steps including steel centering, formwork, laying/pumping,
compacting, roughening them if special finish is to be
provided, finishing uneven and honeycombed surface and curing
etc. complete. The Cement Mortar 1:3 plaster is considered for
rendering uneven and honeycombed surface, only. Newly laid
concrete shall be covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering will not be allowed.), with fully automatic
micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
17254 24-8 Providing and laying Cast in situ/Ready Mix cement 6,615.00 Cu.M
0 concrete in M15 of trap/ granite/quartzite/gneiss metal for
bed blocks, foundation blocks and such other items including
bailing out water, Steel centering, formwork, laying/
pumping, compacting, roughening them if special finish is to
be provided, finishing uneven and honeycombed surface and
curing etc. complete. The Cement Mortar 1:3 plaster is considered
for rendering uneven and honeycombed surface only. Newly laid
Bhavan Dept 2021-22 concrete shall- be covered by
- 2021-2022 gunny
Page bag,
22 of 350plastic, tarpaulin etc. 22/04/21 3:36
22/04/2021 - 24 (Wooden centering will not be allowed.), with fully automatic
micro processor based PLC with SCADA enabled reversible Drum
Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
With fine aggregate (Crushed sand VSI Grade)
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17254 25-11 Providing and laying in situ /Ready Mix cement concrete M-20 of 7,198.00 Cu.M
6 trap / granite /quartzite/ gneiss metal for R.C.C. work in
foundations like raft, strip foundations, grillage and footings of
R.C.C. columns and steel stanchions etc. including bailing
out water, Steel centering formwork, laying/pumping cover
blocks, compaction and curing roughening the surface if special
finish is to be provided (Excluding reinforcement and structural
steel) etc. complete, with fully automatic micro processor based
PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
17254 25-13 Providing and laying Cast in situ/Ready Mix cement concrete 7,374.00 Cu.M
7 M-25 of trap / granite
/quartzite/ gneiss metal for R.C.C. work in foundations like
raft, strip foundations, grillage and footings of R.C.C. columns
and steel stanchions etc. including bailing out water, Steel
centering, formwork ,cover blocks, laying/pumping, compaction
and curing roughening the surface if special finish is to be
provided (Excluding reinforcement and structural steel) etc.
complete, with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
17254 25-15 Providing and laying Cast in situ/Ready Mix cement concrete 7,551.00 Cu.M
8 M-30 of trap / granite
/quartzite/ gneiss metal for R.C.C. work in foundations like
raft, strip foundations, grillage and footings of R.C.C. columns
and steel stanchions etc. columns as per detailed designs and
drawing or as directed including Steel centering formwork,
cover blocks laying/pumping, compaction finishing the formed
surfaces with cement mortar 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening if
special finish is to be provided and curing etc. complete.
(Excluding reinforcement and structural steel). with fully automatic
micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
17254 25-17 Providing and laying Cast in situ/Ready Mix cement concrete 7,639.00 Cu.M
9 M-35 of trap / granite
/quartzite/ gneiss metal for R.C.C. work in foundations like raft,
strip foundations, grillage and footings of R.C.C. columns and
steel stanchions etc. columns as per detailed designs and drawing
Bhavan Dept 2021-22 or as directed
- 2021-2022 - including Steel
Pagecentering,
25 of 350 formwork, cover 22/04/21 3:36
22/04/2021 - 25 blocks, laying/pumping, compaction finishing the formed
surfaces with cement mortar 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening if
special finish is to be provided and curing etc. complete,(Excluding
reinforcement and structural steel).with fully automatic micro
processor based PLC with SCADA enabled reversible Drum
Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17256 26-5 Providing and laying Cast in situ/Ready Mixcement concrete M-20 13,508.00 Cu.M
6 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per
detailed design and drawings including steel centering, formwork,
cover blocks, laying/pumping, compacting and roughening the
surface if special finish is to be provided and curing complete.
(Excluding reinforcement and structural steel). with fully
automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade)
17256 26-7 Providing and laying Cast in situ/Ready Mixcement concrete M-25 13,684.00 Cu.M
7 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per
detailed design and drawings including steel centering, formwork,
cover blocks, laying/pumping, compacting and roughening the
surface if special finish is to be provided and curing complete.
(Excluding reinforcement and structural steel). with fully
automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade)
17256 26-9 Providing and laying Cast in situ/Ready Mix cement concrete 13,508.00 Cu.M
8 M-20 of trap / granite / quartzite / gneiss metal for R.C.C.
canopy as per detailed designs and drawings including steel
centering, formwork, laying/pumping, compacting and roughening
the surface if special finish is to be provided and curing etc.
complete (excluding reinforcement), with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
17256 26-11 Providing and laying Cast in situ/Ready Mix cement concrete 13,684.00 Cu.M
9 M-25 of trap / granite / quartzite / gneiss metal for R.C.C.
canopy as per detailed designs and drawings including steel
centering, formwork, laying/pumping, compacting and roughening
the surface if special finish is to be provided and curing etc.
complete (excluding reinforcement). with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
17257 26-17 Providing and laying Cast in situ/Ready Mix cement concrete 15,304.00 Cu.M
0 in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.
pardi of required thickness including steel centering,
formwork, cover blocks, laying/pumping, compacting , curing ,
Bhavan Dept 2021-22 - 2021-2022 - Page 31 of 350 22/04/21 3:36
finishing and rougheningthem if special finish is to be provided
22/04/2021 - 26
and curing complete.(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17257 26-26 Providing and laying Cast in situ/Ready Mix cement concrete 14,464.00 Cu.M
4 in M-25 of trap / quartzite
/granite /gneiss metal for R.C.C. Waist slab, and steps of
staircases as per detailed design and drawings or as directed
including steel centering, plywood/ steel formwork, steel
props, laying/pumping, compaction, finishing uneven and
honeycombed surface with C.M. 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening the
surface if special finish is to be provided and curing etc. complete.
(Excluding einforcement, including cover block).(Newly laid
concrete shall be covered by gunny bag, plastic, tarpaulin etc.)
with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
17257 26-27 Providing and laying Cast in situ/Ready Mix cement concrete 12,425.00 Cu.M
5 in M-20 of trap / quartzite
/granite /gneiss metal for R.C.C.newel posts of staircase as per
detailed design and drawings including steel centering,
plywood / steel formwork, steel props, laying /
pumping, compaction, finishing uneven and honeycombed surface
with C.M.1:3 of sufficient minimum thickness to give a smooth and
even surface or roughening the surface if special finish is to be
provided and curing etc. complete. (Excluding reinforcement,
including cover block). (Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc.) with fully automatic micro
processor based PLC with SCADA enabled reversible Drum
Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
With fine aggregate (Crushed sand VSI Grade)
17257 26-28 Providing and laying Cast in situ/Ready Mix cement concrete 12,601.00 Cu.M
6 in M-25 of trap / quartzite
/granite /gneiss metal for R.C.C.newel posts of staircase as per
detailed design and drawings including steel centering, plywood /
steel formwork, steel props, laying/pumping, compaction, finishing
uneven and honeycombed surface with C.M.1:3 of sufficient
minimum thickness to give a smooth and even surface or
roughening the surface if special finish is to be provided and
curing etc. complete. (Excluding reinforcement, including
cover block). (Newly laid concrete shall be covered by gunny
bag, plastic, tarpaulin etc.) with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
Rate In (Rs)
Item Description Rate Unit
17257 26-29 Providing and laying Cast in situ/Ready Mix cement concrete 13,640.00 Cu.M
7 in M-20 of trap /granite / gneiss/ quartzite metal for R.C.C.
arches with skew backs as per detailed design and drawings or as
directed including steel centering, plywood/steel formwork, steel
props, laying/pumping, compaction, finishing uneven and
honeycombed surface with C.M. 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening the
surface if special finish is to be provided and curing etc. complete.
(Excluding reinforcement, including cover block). Newly laid
concrete shall be covered by gunny bag, plastic, tarpaulin etc. with
fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)
etc. complete. With fine aggregate (Crushed sand VSI Grade)
17257 26-30 Providing and laying Cast in situ/Ready Mix cement concrete 13,816.00 Cu.M
8 in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C.
arches with skew backs as per detailed design and drawings or as
directed including steel centering, plywood/steel formwork, steel
props, laying/pumping, compaction, finishing uneven and
honeycombed surface with C.M. 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening the
surface if special finish is to be provided and curing etc. complete.
(Excluding reinforcement, including cover block). Newly laid
concrete shall be covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering will not be allowed) With fine aggregate
(Crushed sand VSI Grade)
17257 26-31 Providing and laying Cast in situ/Ready Mix cement concrete 14,171.00 Cu.M
9 in M-20 of trap / granite
/gneiss / quartzite metal for R.C.C. fins of required thickness
in position as shown on the drawings or as directed by
Engineer-in-charge including steel centering, plywood / steel
formwork, steel props, laying/pumping, compaction, finishing
uneven and honeycombed surface with C.M. 1:3 of sufficient
minimum thickness to give a smooth and even surface or
roughening the surface if special finish is to be provided and curing
etc. complete. (Excluding reinforcement, including cover block)
Newly laid concrete shall be covered by gunny bag, plastic,
tarpaulin etc. with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
17258 26-32 Providing and laying Cast in situ/Ready Mix cement concrete 14,348.00 Cu.M
0 in M-25 of trap / granite
/gneiss / quartzite metal for R.C.C. fins of required thickness
in position as shown on the drawings or as directed by
Bhavan Dept 2021-22 - 2021-2022 - Page 34 of 350 22/04/21 3:36
Engineer-in-charge including steel centering, plywood / steel
22/04/2021 - 26
formwork, steel props, laying/pumping, compaction, finishing
uneven and honeycombed surface with C.M. 1:3 of sufficient
minimum thickness to give a smooth and even surface or
roughening the surface if special finish is to be provided and curing
etc. complete. (Excluding reinforcement, including cover block)
Newly laid concrete shall be covered by gunny bag, plastic,
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
structures.)
Note : The item should be executed with prior approval of
Superintending Engineer. FREQUENCY OF TEST OF FUSION
BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than
one full length bar every twenty bars for each size
b) continuity of coating shall be determined by testing one full
length bar in every twenty bars for each size
c) Coating thickness over the whole of the coated bar
section shall be determined by sectioning and examining one
bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from
each size according to the frequency given below:
Nominal Size of Bar, MM Number of Samples
For all types of bar : Minimum 1 for every diameter or as directed
by engineer in charge
17258 26-38 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars 16,191.00 MT
5 of 10mm diameter as per IS: 13620-1993 specifications for a
thickness of 175micron Permissible variation of 50 micron
including testing of coating at plant, including cost for careful
handling using PVC coating, binding wires instead of G. I.
wires to and from Plant) touching up the material supplied
repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new
structures.)
Note : The item should be executed with prior approval of
Superintending Engineer. FREQUENCY OF TEST OF FUSION
BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than
one full length bar every twenty bars for each size
b) continuity of coating shall be determined by testing one full
length bar in every twenty bars for each size
c) Coating thickness over the whole of the coated bar
section shall be determined by sectioning and examining one
bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from
each size according to the frequency given below:
For all types of bar : Minimum 1 for every diameter or as directed
by engineer in charge
17258 26-39 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars 13,970.00 MT
6 of 12mm diameter as per IS: 13620-1993 specifications for a
thickness of 175micron Permissible variation of 50 micron
including testing of coating at plant, including cost for careful
handling using PVC coating, binding wires instead of G. I.
wires to and from Plant) touching up the material supplied
Bhavan Dept 2021-22 - 2021-2022 - Page 36 of 350 22/04/21 3:36
repair work etc complete as per detailed specifications. (Lead
22/04/2021 - 26
200km from plant) etc complete. (Item shall be used for new
structures.)
Note : The item should be executed with prior approval of
Superintending Engineer. FREQUENCY OF TEST OF FUSION
BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17259 27-1 Providing second class Burnt Brick masonry with conventional/ 7,272.00 Cu.M
9 I.S. type bricks in cement mortar 1:6 in foundations and plinth
of inner walls/ in plinth external walls including bailing out water
manually , striking joints on unexposed faces, raking out joints on
exposed faces and watering etc. Complete.
17260 27-2 Providing first class Burnt Brick masonry with conventional/ 7,094.00 Cu.M
0 I.S. type bricks in cement mortar 1:6 in plinth including bailing
out water manually, striking joints on unexposed faces, pointing
with cement mortar 1:3 on exposed face and watering etc.
Complete.
17260 27-3 Providing second class Burnt Brick masonry with conventional/ 7,042.00 Cu.M
1 I.S. type bricks in cement mortar 1:6 in plinth as backing in
composite masonry including bailing out water manually, striking
joints, raking out joints and watering etc Complete.
17260 27-5 Providing second class Burnt Brick masonry with conventional/ 7,494.00 Cu.M
2 I.S. type bricks in cement mortar 1:6 in superstructure
including striking joints, raking out joints, watering and
scaffolding etc. Complete
17260 27-6 Providing second class Burnt Brick masonry with conventional/ 1,002.00 Sq.m
3 I.S. type bricks in cement mortar 1:4 in half brick thick wall
including mild steel longitudinal reinforcement of 2 bars of 6 mm
diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every
third course, properly bent and bonded at ends scaffolding, racking
out joints and watering etc. complete.
17260 27-7 Providing Burnt Brick-on-edge masonry with second class bricks of 729.00 Sq.m
4 conventional type bricks in cement mortar 1:3 including mild
steel longitudinal reinforcement of 2 bars of 6mm diameter /
one strips of hoop iron 25 mm X 1.6 mm placed at every third
course, properly bent and bonded at ends, scaffolding, raking out
joints and watering etc .complete.
17260 27-8 Providing first class Burnt Brick masonry with conventional / 7,993.00 Cu.M
5 I.S. type bricks in cement mortar 1:4 including scaffolding,
racking out joints pointing in C.M. 1:3 and watering in pillars
of rectangular or square shape as shown on the drawing or as
directed etc.complete.
17260 27-9 Providing first class Brick masonry with conventional / IS. type 9,296.00 Cu.M
6 bricks in cement mortar 1:4 including scaffolding, racking out
joints pointing in C.M 1:3 and watering etc. in pillars of curved
shapes, as shown on the drawing or as directed etc. complete.
Rate In (Rs)
Item Description Rate Unit
17260 27-10 Providing second class Burnt Brick masonry with conventional / 7,906.00 Cu.M
7 I.S. type bricks in cement mortar 1:4 including scaffolding, racking
out joints and watering etc. in pillar of rectangular shapes as
shown in the drawings or as directed complete.
17260 27-11 Providing second class Burnt Brick masonry with conventional / 9,370.00 Cu.M
8 I.S. type bricks in cement mortar 1:4 including scaffolding, racking
out joints and watering etc.in pillar of curved shapes as shown in
the drawing or as directed complete.
17260 27-12 Providing fly ash brick masonry with conventional / I.S. type fly 6,645.00 Cu.M
9 ash bricks in C.M. 1:6 in foundation and plinth including bailing
out water manually striking joints, racking out joints watering and
scaffolding etc. complete.
17261 27-13 Providing fly ash brick masonry with conventional/ I.S. type bricks 6,879.00 Cu.M
0 in cement mortar 1:6 in superstructure including striking joints,
raking out joints, watering and scaffolding etc. Complete
17261 27-14 Providing Second class fly ash brick masonry with conventional / 998.00 Sq.m
1 I.S. type bricks in cement mortar 1:4 in half brick thick wall
including mild steel longitudinal reinforcement of two bars of 6 mm
diameter / two hoop iron strips 25 mm x 1.60 mm at every third
course, properly bent and bounded at ends scaffolding raking out
joints and watering etc. complete.
17261 27-15 Providing Autoclaved Aerated Concrete Block masonary of 6,969.00 Cu.M
2 Ecolite or equivalent make conforming to IS:2185 (Part 3) -
1984 in extra fine jointing mortar of fixoblock of UltraTech or
equivalent in superstructure including striking joints, raking out
joints and scaffolding etc. Complete. (The test shall be carried out
conforming to IS:6441 (Part I) - 1972)
17261 27-16 Providing Autoclaved Aerated Concrete Block masonary of 981.00 Sq.m
3 Ecolite or equivalent make conforming to IS:2185 (Part 3) -
1984 in extra fine jointing mortar of fixoblock of UltraTech or
equivalent in Half brick thick wall including striking joints,
raking out joints and scaffolding etc. Complete. (The test shall
be carried out conforming to IS:6441 (Part I) - 1972)
Specification:
17261 28-1 Providing uncoursed rubble masonry of trap / granite / 5,431.00 Cu.M
4 quartzite / gneiss stones in cement mortar 1:6 in foundation
and plinth of inner walls / in plinth of external walls
including bailing out water manually , striking joints on un exposed
faces and watering etc.complete.
17261 28-2 Providing uncoursed rubble masonry of trap / granite / 5,558.00 Cu.M
5 quartzite / gneiss stones in cement mortar 1:5 in basements
including scaffolding, bailing out water manually, racking out joints
when plastering is to be done striking joints where no pointing or
plastering is to be done and watering etc.complete.
17261 28-3 Providing uncoursed rubble masonry of trap / granite / 5,801.00 Cu.M
6 quartzite / gneiss stone in cement mortar 1:3 in basement
with patent water proofing compound added to it at rate of
1Kilogramper bag of cement including bailing out water
manually, scaffolding racking out joints when plastering is to be
done and watering etc. complete.
17261 28-4 Providing uncoursed rubble masonry of trap / granite / 5,921.00 Cu.M
7 quartzite / gneiss stones in cement mortar 1:6 in
superstructure including racking out joints when plastering is
to be done / striking joints when no plastering is to be
done on inside watering and scaffolding etc.complete.
17261 28-5 Providing random rubble masonry second sort of trap / granite / 5,152.00 Cu.M
8 quartzite / gneiss stones in cement mortar 1:6 in plinth
including bailing out water manually , striking joints on
unexposed faces. (Excluding pointing) etc.complete.
17261 28-6 Providing random rubble masonry second sort of trap / granite / 5,813.00 Cu.M
9 quartzite / gneiss stones in cement mortar 1:6 in superstructure
racking out joints when plastering is to be done / striking joints
when no pointing or plastering is to be done on the inside
watering and scaffolding etc.complete.
17262 28-7 Providing random rubble masonry first sort of trap / 6,314.00 Cu.M
0 granite / quartzite / gneiss stones in cement mortar 1:6 in
external walls of plinth including bailing out water manually ,
racking out joints when pointing is to be done and striking
joints from inside including watering etc.complete.
17262 28-8 Providing random rubble masonry first sort of trap /granite / 6,645.00 Cu.M
1 quartzite / gneiss stones in cement mortar 1:6 in superstructure
including bailing out water manually, raking out joints from
outside and striking joints when no pointing or plastering is
to be done from inside watering and scaffolding etc.complete.
Bhavan Dept 2021-22 - 2021-2022 - Page 43 of 350 22/04/21 3:36
22/04/2021 - 28
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17262 29-1 Providing and laying masonry of I.S. Standard C.C. hollow block 1,189.00 Sq.m
7 100 x 200 x 400 mm with 100mm thick in cement mortar 1:6
proportion for superstructure including curing, scaffolding etc.
complete.
17262 29-2 Providing and laying masonry of I.S. Standard C.C. hollow 1,351.00 Sq.m
8 block 200 x 200 x 400 with 200mm thick mm in cement
mortar 1:6 proportion for superstructure including curing,
scaffolding etc. complete.
17262 29-3 Providing and constructing masonry in precast solid Concrete Block 7,308.00 Cu.M
9 (Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987)
having compressive strength 5-00 N/mm2) of size (300 mm x 200
mm x 150mm) in cement mortar 1:6 for superstructure including
striking joints on unexposed faces, racking out joints on exposed
faces, watering, curing and scaffolding etc. complete.
17263 29-4 Providing and constructing masonry in Autoclaved Areaclaved 7,548.00 Cu.M
0 ( Celluar) Concrete Block of aproved manufacturer confirming to IS
2185 Part III 1984 of size ( 625x240x225)mm in extra fine jointing
mortar of fixoblock of Ultra Tech or equivalent in foundaions and
plinth of inner walls/in plinth external walls including bailing
out water,striking joints on unexposed faces,racking out joints
on exposed faces and watering etc.complete
17263 29-5 Providing and constructing masonry in Autoclaved Areaclaved 7,628.00 Cu.M
1 ( Celluar) Concrete Block of aproved manufacturer confirming to IS
2185 Part III 1984 of size ( 625x240x225)mm in extra fine
jointing mortar of fixoblock of Ultra Tech or equivalent
in superstucture including,striking joints,racking out joints
watering and scaffolding etc.complete
17263 29-6 Providing and constructing masonry in Autoclaved Areaclaved 1,010.00 Sq.m
2 (Celluar) Concrete Block of aproved manufacturer confirming to IS
2185 Part III 1984 of size (625x 240x100)mm in extra fine jointing
mortar of fixoblock of Ultra Tech or equivalent in half brick thick
wall including 2 hoop iron strips 25mm x 1.6mm at every third
course,properly bend and bonded at ends scaffolding racking
out joints and watering compete
17263 29-11 Providing Green Build Product (GBP) Build Fast Plus masonry 1,454.00 Sq.m
3 ecofriendly wet mix /Blocks laying Adhesive is a
pre-polymerized, wet mix jointing adhesive which is suitable
for Building masonry walls with all kind of blocks with thickness of
thin layer of 2mm to 4mm between masonry units. There is no
need to pre-wet the Blocks nor to post cure the wall with
water.Confirming to IS 2185 of size 75 x 240x 650 mm in
Bhavan Dept 2021-22 - 2021-2022 - Page 45 of 350 22/04/21 3:36
superstructure including striking joints, racking outjoints faces and
22/04/2021 - 29
scaffolding etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17263 30-1 Providing expansion joints in R.C.C. framed structure 3,858.00 Sq.m
6 (interior column) with plain premoulded filler 25 mm thick
including fixing T.W. battens on both faces and finishing as directed
etc. Complete.
17263 30-2 Providing expansion joints in R.C.C. framed structure 4,548.00 Sq.m
7 (exterior Columns) with plain premoulded filler 25 mm thick
and 3 mm thick alluminium plate, hold fast, fixing T.W.
battens on internal face, finishing etc. complete as directed.
17263 30-3 Providing expansion joints in R.C.C. framed structure (at floor 4,661.00 Sq.m
8 level) with premoulded filler 25 mm thick and 3 mm thick
aluminium plate as required, bitumen poured filler and fixing T.W.
battens on rear faces etc. complete as directed.
17263 30-4 Providing expansion joints in R.C.C. framed structure (at terrace 4,553.00 Sq.m
9 level) with premoulded filler 25 mm thick and 3 mm thick
aluminium plate as required, bituminous poured filler, fixing lead,
flashing on upper side and T.W. battens on inner face finishing etc.
Complete as directed.
17264 30-5 Providing expansion joints in reinforced cement concrete framed 4,813.00 Sq.m
0 structure (interior columns) with plain premoulded filler with
confirming to IS 1838,1961, 25 mm thick with 75 mm wide
and 1 mm thick stainless steel plate finishing etc. complete as
directed
17264 30-6 Providing expansion joints in R.C.C. framed structure (exterior 5,007.00 Sq.m
1 column) with plain premoulded filler 25 mm thick with 75 mm
wide and 1 mm thick stainless steel plate and finishing etc.
complete.
17264 30-7 Providing expansion joints in R.C.C. framed structure (at floor 5,612.00 Sq.m
2 level) with plain premoulded filler 25 mm thick with 75 mm
wide and 1 mm thick stainless steel plat and finishing etc.
complete.
17264 30-8 Providing expansion joints in R.C.C. framed structure (at 5,587.00 Sq.m
3 Terrace level) with premoulded filler 25 mm thick with 40 mm
wide and 1 mm thick stainless steel plate as required, bitumen
poured filler and finishing etc. complete as directed.
17264 30-9 Providing and fixing of BITUFLEX CLOSE CELL FOAM of size 30 mm 2,172.00 Rmt
4 x 30 mm in double layer in the expansion joints in R.C.C
framed structure (at floor level / at terrace level / interior
columns) for overlapping of closed cell foam joints, applying
TP- 40 PRIMER on both the sides of concrete surface, filling the
Bhavan Dept 2021-22 25 mm x 25 mm
- 2021-2022 - gap with the POLYDEE-41
Page 47 of 350 highly flexible sealant 22/04/21 3:36
22/04/2021 - 30 and covering the joint with Polydee-LM, 150 mm width in 2 coats
etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17264 31-1 Providing and laying damp proof course 50 mm thick in M20 449.00 Sq.m
7 cement concrete layer and bitumen / using cement with
waterproofing compound curing, formwork etc. complete.
17264 31-2 Providing and applying Bitumen VG30/VG40 layer at 2 Kilogram. 105.00 Sq.m
8 per square meter over the terrace, structural slab including
cleaning the surface for waterproofing as directed complete
17264 31-3 Providing leak proof treatment by Injection grouting method to 37.00 litre
9 old floor without removing tiles of W.C., bath, with cement sand
proportion of 1:1.5 and waterproofing compound at 2
Kilogram/bag of cement mixed in 35 liters of water including
drilling holes in required position grouting with above mixed
solution and ceiling etc. complete.
17265 31-4 Providing cement based water proofing treatment to terraces 1,181.00 Sq.m
0 (Indian water proofing or alike) with brick bats laid in required
slope to drain the water for any span after cleaning the base
surface. Applying a coat of cement slurry admixed with approved
water proofing compound and laying the brick bats on bottom
layer in C.M.1:5 admixed with approved water proofing compound
filling up to half depth of brick bats, curing this layer for 3 days,
applying cement slurry over this layer joints of brick bats with
C.M.1:3 admixed with approved water proofing compound and
finally top finishing with average 20 mm. thick layers of same
mortar added with jute fiber at 1Kilogramper bag including
finishing the surface smooth with cement slurry admixed with
approved water proofing compound. Marking finished surface
with false squares of 300mm x 300 mm. making the junctions at
the parapet rounded and tapered top for required height, with
drip mould at the junction of plaster and parapet and curing
and covering 10 years Guarantee against leakproofness on
Court fee stamp paper of Rs. 500/- including ponding test etc.
complete.
17265 31-5 Providing water proof bedding for flooring of Bath and WC 425.00 Sq.m
1 25 mm thick in C.M. 1:3 including using approved water
proofing compound in specified proportion as per
manufacturers specifications for per bag of cement including
leveling, curing and covering 10 years guarantee on court fee
stamp paper of Rs.500/- including ponding test etc. complete.
17265 31-6 Providing waterproof plaster in W.C. and bath 12 mm thick for 381.00 Sq.m
2 dado in cement mortar 1:3 with neat finishing, floating using
waterproofing compound at the rate of 1 Kilogram. per bag of
cement of approved make and manufacturer and curing etc.
Bhavan Dept 2021-22 complete.
- 2021-2022(Excluding
- Tiles) Page 49 of 350
(As directed by Engineer in Charge) 22/04/21 3:36
22/04/2021 - 31
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17266 32-1 Providing internal cement plaster 6 mm thick in a single coat in 206.00 Sq.m
5 cement mortar 1:4 without neeru finish to concrete surface in all
positions including scaffolding and curing etc. complete.
17266 32-2 Providing internal cement plaster 6 mm thick in a single coat in 212.00 Sq.m
6 cement mortar 1:3 without neeru finish to concrete surface in all
positions including scaffolding and curing etc. complete.
17266 32-3 Providing internal cement plaster 12mm thick in single coat 276.00 Sq.m
7 in cement mortar 1:5 without neeru finish to concrete or brick
surfaces, in all positions including scaffolding and curing etc.
complete.
17266 32-4 Providing internal cement plaster 12mm thick in single coat 290.00 Sq.m
8 in cement mortar 1:4 without neeru finish to concrete or brick
surfaces, in all positions including scaffolding and curing etc.
complete.
17266 32-5 Providing internal cement plaster 12mm thick in single coat 301.00 Sq.m
9 in cement mortar 1:3 without neeru finish to concrete or brick
surfaces, in all position including scaffolding and curing etc.
complete.
17267 32-6 Providing internal cement plaster 20mm thick in Single coats in 390.00 Sq.m
0 cement mortar 1:5 without
neeru finish, to concrete, brick surface, in all positions including
scaffolding and curing etc. complete
17267 32-7 Providing internal cement plaster 20mm thick in Single coats in 406.00 Sq.m
1 cement mortar 1:4 without neeru finish, to concrete, brick
surface, in all positions including scaffolding and curing
etc.complete.
17267 32-8 Providing internal cement plaster 20mm. thick in Single coats in 416.00 Sq.m
2 cement mortar 1:3 without
neeru finish, to concrete, brick surface, in all positions including
scaffolding and curing etc. complete.
17267 32-11 Providing sand faced plaster externally in cement mortar using 657.00 Sq.m
3 approved screened sand, in all positions including base coat of
15 mm thick in cement mortar 1:4 using waterproofing
compound at 1Kilogramper cement bag curing the same for not
less than 2 days and keeping the surface of the base coat
rough to receive the sand faced treatment 6 to 8 mm thick
in cement mortar 1:4 finishing the surface by taking out
grains and curing for fourteen days scaffolding etc.complete.
Rate In (Rs)
Item Description Rate Unit
17267 32-12 Providing rough cast cement plaster externally in two coats 578.00 Sq.m
4 to concrete, brick or stone masonry surfaces in all positions with
base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast
treatment 12mm thick in proportion 1:1 1/2:3 including
scaffolding and fourteen days curing complete.
17267 32-13 Providing rough cast cement plaster externally in two coats 585.00 Sq.m
5 with coloured cement finish to concrete/ brick/ stone masonry
surfaces in all positions with base coat 12 to 15 mm. thick in C.M.
1:4 using gray cement and rough cast treatment 12 mm thick in
proportion of 1:1 1/2:3 using colour pigment including scaffolding
and fourteen days curing etc. complete.
17267 32-15 Providing neeru finish to plastered surfaces in all positions 61.00 Sq.m
6 including scaffolding and curing etc. complete.
17267 32-16 Providing flush grooved pointing with cement mortar 1:3 for brick 171.00 Sq.m
7 work including scaffolding and curing etc. complete.
17267 32-17 Providing flush grooved pointing with cement mortar 1:3 for stone 180.00 Sq.m
8 masonry work including scaffolding and curing etc. complete.
17267 32-18 Providing tuck pointing with cement mortar 1:3 for stone/Brick 179.00 Sq.m
9 masonry including scaffolding and curing etc. complete.
17268 32-19 Providing weathered pointing with cement mortar 1:3 for 178.00 Sq.m
0 stone/ Brick masonary including scaffolding and curing etc.
complete.
17268 32-20 Providing vee pointing with cement mortar 1:3 for stone / 171.00 Sq.m
1 Brick masonry including scaffolding and curing etc. complete
17268 32-21 Providing fine cement finish 1.5 mm thick over green plaster 69.00 Sq.m
2 surface including scaffolding curing etc. complete.
17268 32-22 Labour charges for providing groove in external plaster having 47.00 Rmt
3 width and spaced as directed by engineer incharge etc. complete.
17268 32-23 Providing patti/ band 75mm wide on plastered surface 12 mm to 52.00 Rmt
4 15 mm thick in C.M. 1:3 line and level including neat finishing
scaffolding curing etc. complete.
17268 32-24 Providing patti/ band 100mm wide on plastered surface 12 mm to 68.00 Rmt
5 15 mm thick in C.M. 1:3 line and level including neat finishing
scaffolding curing etc. complete.
17268 32-25 Providing patti/ band 150mm wide on plastered surface 12 mm to 82.00 Rmt
6 15 mm thick in C.M. 1:3 line and level including neat finishing
scaffolding curing etc. complete.
Rate In (Rs)
Item Description Rate Unit
17268 32-26 Providing and fixing chicken mesh of 22 gauge, with about 30 cm. 134.00 Rmt
7 width at the junction of
R.C.C members and brick work, of approved quality including
fixing mesh in position by necessary drilling in
concrete /B.B.masonry and or tying by binding wire etc. complete.
17268 32-27 Providing and applying plaster with plaster of paris in 6mm 137.00 Sq.m
8 thickness to previously plaster surface in all position including
preparing the surface scaffolding etc. complete.
17268 32-28 Providing and applying spray plaster made with finely graded 317.00 Sq.m
9 marble and quartz in 2 mm thickness in two coats using putty
knife or trowel to newly plaster fairly even surface after minimum
30 days gap in all position including finishing the surface using
zero number sand paper or fine emry paper gently level the area
by moving paper in round circles removing the dust and clean the
surface with dry cloth and scaffolding including all materials and
labour etc. complete.
17269 32-29 Providing and applying laying Aggregate plaster in granite / 1,505.00 Sq.m
0 marble stones, as decorative finish to give granite / marble
like appearance to concrete, brick or block surfaces in all
position including preparation of surface smoothly, evenly by
racking of joints in case of Brick or block work including
backing layer of 12 mm thick with cement mortar 1:3 with 2%
integral cement water proofing compound, roughening for wall
keying hardening and drying the surface for a minimum five days
gaps including second coat of cement lime mortar into a proportion
1:4 preparing the surface for three coat of marble finish plaster
giving a thin coat of white cement and two parts of course calcite
powder, applying the mortar with steel float on the surface in
proper evenness applying at coat of white cement and lime to set
a smooth finish then applying a thin coat of slurry made of
white cement and black oxide colour in required proportion by
the steel float to get black streaks on the surface and curing the
surface for two days including all materials and labour etc.
complete.
17269 32-30 Providing and applying plaster / wall punning with plaster of 540.00 Sq.m
1 paris ( with plaster of paris material of Ambuja / Mor Chap
or equivalent make ) in 10 to 13 millimeter thickness to
previously plastered surface / or on newly brick surface ( Excluding
rough cast plaster ) in all position including preparing and Finishing
the surface scaffolding etc.complete.
17269 32-31 Providing and applying gypsum plaster ( with Gypsum material of 631.00 Sq.m
2 Gypsum India / Mega Sign or equivalent make ) with finishing with
gypsum material in 10 to 13 millimeter thickness to previously
Bhavan Dept 2021-22 - 2021-2022 - Page 55 of 350 22/04/21 3:36
plastered surface / or on newly brick surface ( Excluding rough
22/04/2021 - 32
cast plaster ) in all position including preparing and Finishing the
surface scaffolding etc.complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17269 33-1 Providing and laying Rough Shahabad Stone Flooring 25mm to 721.00 Sq.m
8 30mm thick and of required width in plain/ diamond pattern on a
bed of 1:6 C.M. including cement float, striking joints, pointing in
cement mortar 1:3 curing and cleaning etc. complete.
17269 33-2 Providing and laying Rough Shahabad Stone Flooring 40mm.to 45 796.00 Sq.m
9 mm. thick and of required width in plain/ diamond pattern on a
bed of 1:6 C.M. including cement float, striking joints, pointing in
cement mortar 1:3 curing and cleaning etc. etc. complete
17270 33-3 Providing and laying Rough Shahabad Stone Flooring 50mm to 869.00 Sq.m
0 60mm thick and of required width in plain/ diamond pattern on a
bed of 1:6 C.M. including cement float, striking joints, pointing in
cement mortar 1:3 curing and cleaning etc. etc. complete.
17270 33-4 Providing and laying Polished Shahabad Stone flooring 25mm to 806.00 Sq.m
1 30mm thick and required width wide in plain/ diamond pattern
on a bed of 1:6 C.M. including cement float, filling joints,
with neat cement slurry, curing, polishing and cleaning etc.
complete.
17270 33-5 Providing and laying Polished Tandur Stone flooring 25mm to 1,029.00 Sq.m
2 30mm thick required width in plain/ diamond pattern on a bed of
1:6 C.M. including cement float, filling joints with neat cement
slurry, curing, polishing and cleaning etc. complete.
17270 33-6 Providing and laying machine cut machine Polished Kota stone 1,234.00 Sq.m
3 flooring 25mm to 30mm thick and required width in plain/
diamond pattern on bed of 1:6 C. M. including cement float,
filling joints with neat cement slurry, curing, polishing and cleaning
etc. complete.
17270 33-7 Providing and laying handcut polished Kotah Stone flooring 25mm 1,166.00 Sq.m
4 to 30mm thick and 30cm wide in plain/diamond pattern on a bed
of 1:6 C.M. including cement float, filling joints with neat cement
slurry, curing, polishing and cleaning etc. complete.
17270 33-8 Providing and laying polished hand cut Kotah Stone flooring 25mm 1,298.00 Sq.m
5 to 30mm thick and 45cm to 55cm wide in plain/diamond pattern
on a bed of 1:6 C.M. including cement float, filling joints with neat
cement slurry, curing, polishing and cleaning complete.
17270 33-9 Providing and laying cement concrete flooring 40 mm thick with 529.00 Sq.m
6 M15 cement concrete laid to proper level and slope in alternate
bays including compaction, filling joints, marking lines to give the
appearance of tiles of 30 cm x 30 cm or other size laid
diagonally /square etc finishing smooth (with extra cement) in
Bhavan Dept 2021-22 any colour as -directed and curing
- 2021-2022 etc.of complete.with
Page 57 350 Crushed sand 22/04/21 3:36
22/04/2021 - 33 VSI Grade
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17271 33-16 Providing and laying cement concrete flooring 50mm thick with 462.00 Sq.m
3 M20 cement concrete laid to proper level and slope in alternate
bays including compaction, filling joints, marking lines to give the
appearance of tiles of 30cm x 30cm or other size laid diagonally/
square etc. finishing smooth (with extra cement) in any colour as
directed and curing etc. complete. With Crushed Sand.
17271 33-17 Providing and laying machine cut machine polished shahabad 1,095.00 Sq.m
4 Stone slabs 20 to 25mm thick for treads and risers of steps and
staircases, with rounded nosing for the treads on a bed of 1:4
cement mortar including cement float, filling joints with neat
cement slurry, curing, polishing and cleaning etc. complete.
17271 33-18 Providing and laying machine cut machine polished machine cut 1,508.00 Sq.m
5 Kota stone slabs 20 to 25 mm thick for treads and risers of steps
and staircases, with rounded nosing for the treads on a bed of 1:4
cement mortar including cement float, filling joints with neat
cement slurry, curing, polishing and cleaning etc. complete.
17271 33-19 Providing sills of polished Kota stone 25 mm to 30mm thick, on a 1,231.00 Sq.m
6 bed of 1:4 cement mortar including cement float, filling joints
with slurry, curing,moulding edges, polishing and cleaning etc.
complete.
17271 33-20 Providing sills of polished Kadappa stone 25mm to 30mm 1,078.00 Sq.m
7 thick, on a bed of 1:4 cement mortar including cement float,
filling joints with slurry, curing polishing and cleaning etc.
complete.
17271 33-21 Providing sills of required material 20mm to 25mm thick, on 2,153.00 Sq.m
8 a bed of cement mortar 1:4 including cement float, filling
joints with neat cement slurry, curing, polishing, moulding
edges, cleaning complete.
a) Marble other than white makrana
17271 33-22 Providing sills of required material 20mm to 25mm thick, on a 3,871.00 Sq.m
9 bed of cement mortar 1:4 including cement float, filling joints with
neat cement slurry, curing, moulding edges, polishing,cleaning
complete. b) Granite
17272 33-23 Providing and fixing black kadappa stone as shelves 25mm. 1,174.00 Sq.m
0 thick machine polished, extending the polish upto 20 cm
width on lowerside, rounding corners, laying in position
jointing with bedding cement mortar 1:4 proportion curing etc etc.
complete.
17272 33-24 Providing and laying matt finish ceramic tiles of having size 30 1,152.00 Sq.m
1 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to
8 mm thick for flooring in required position laid on a bed of 1:4
Bhavan Dept 2021-22 cement
- 2021-2022 -
mortar including Page 59 of 350
cement float, filling joint with 22/04/21 3:36
22/04/2021 - 33 white/colour cement slurry cleaning curing etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17274 33-48 Providing and fixing green marble of 18 to 20 mm thick for 2,358.00 Sq.m
5 door frame/ dado/ window boxing etc. On C.M. 1:6 including
filling joints with polymer base filler nosing / moulding the sharp
edges wherever necessary, curing, etc. complete.
17274 33-49 Providing and fixing heavy duty inter locking concrete Grey 913.00 Sq.m
6 paving blocks of 60 mm thickness of having a strength of 300
Kilogram/Sq.cm. of approved quality and shape on a bed of
crushed sand of 25 to 30 mm thick including skirting joints and
cleaning etc. complete.
17274 33-50 Providing and fixing heavy duty inter locking concrete Grey 1,018.00 Sq.m
7 paving blocks of 80 mm thickness of having a strength of 300
Kilogram/Sq.cm. of approved quality and shape on a bed of
crushed sand of 25 to 30 mm thick including skirting joints and
cleaning etc. complete.
17274 33-51 Providing and fixing heavy duty inter locking concrete 873.00 Sq.m
8 Coloured paving blocks of 60 mm thickness of having a
strength of 300 Kilogram/Sq.cm. of approved quality and shape
on a bed of crushed sand of 25 to 30 mm thick including skirting
joints and cleaning etc. complete
17274 33-52 Providing and fixing heavy duty inter locking concrete 1,150.00 Sq.m
9 Coloured paving blocks of 80 mm thickness of having a
strength of 300 Kilogram/Sq.cm. of approved quality and shape
on a bed of crushed sand of 25 to 30 mm thick including skirting
joints and cleaning etc. complete
17275 33-53 Providing and fixing heavy duty inter locking concrete 936.00 Sq.m
0 RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter
thickness of having a strength of 400 Kilogram/sq.m of approved
quality and shape on a bed of crushed sand of 25 to 30 millimeter
thick including striking joints and cleaning etc. complete. (using
100% crushed sand)
17275 33-54 Providing and fixing heavy duty inter locking concrete Rubber 1,359.00 Sq.m
1 mould glossy paving blocks of 80 mm thickness of having a
strength of 400 Kilogram/Sq.cm. of approved quality and shape on
a bed of crushed sand of 25 to 30 mm thick including skirting
joints and cleaning etc. complete. (using 100% crushed sand)
17275 33-55 Providing and fixing heavy duty inter locking concrete 822.00 Sq.m
2 Coloured paving blocks of 40 mm thickness of having a
strength of 200 Kilogram/Sq.cm. of approved quality and shape
on a bed of crushed sand of 25 to 30 mm thick including skirting
joints and cleaning etc. complete.
Rate In (Rs)
Item Description Rate Unit
17275 33-56 Providing leather finished polishing to Granite Stone slab by 647.00 Sq.m
3 continuous grinding in 4 coats of different bits to receive rough
and matt finish including buffing process before laying and fixing
of stone as per drawing and design, including cleaning,
washing and finishing etc. complete.
17275 33-57 Providing leather finished polishing to Kota / Marble / 548.00 Sq.m
4 Shahabad / Kadappa Stone slab by continuous grinding in 4
coats of different bits to receive rough and matty finish including
buffing process before laying and fixing of stone as per
drawing and design, including cleaning, washing and finishing
etc. complete.
17275 33-58 Providing and laying Vitrified mirror/glossy finish having 1,180.00 Sq.m
5 decorative type of size 590 millimeter to 605 millimeter x 590
millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a
existing flooring) with bonding chemical and confirming to IS
15622-2006 (Group Bla) of approved make shade and pattern for
flooring in required position laid on a bed of bonding chemical
filling joints curing and cleaning etc . complete.
17275 33-59 Providing and laying Vitrified MATT finish having decorative type of 1,624.00 Sq.m
6 size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness
(on a existing flooring) with bonding chemical and confirming to
IS 15622-2006 (Group Bla) of approved make shade and
pattern for flooring in required position laid on a bed of
bonding chemical filling joints curing and cleaning
etc .complete.
17275 33-61 Providing and laying Vitrified MATT finish having decorative type of 2,284.00 Sq.m
7 size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter
thickness (on a existing flooring) with bonding chemical and
confirming to IS 15622-2006 (Group Bla) of approved make
shade and pattern for flooring in required position laid on a
bed of bonding chemical filling joints curing and cleaning
etc .complete.
17275 33-62 Providing and laying Vitrified RUSTIC MATT STONE finish having 1,735.00 Sq.m
8 decorative type tiles of size 600 millimeter x 600 millimeter of 8
to 10 millimeter thickness (on a existing flooring) with bonding
chemical and confirming to IS 15622-2006 (Group Bla) of
approved make shade and pattern for flooring in required position
laid on a bed of bonding chemical filling joints curing and cleaning
etc. complete.
17275 33-65 Providing and laying Vitrified STONE EFFECT FINISH having 1,775.00 Sq.m
9 decorative type tiles of size 590 millimeter to 605 millimeter x
590 millimeter to 605 millimeter of 8 to 10 millimeter
Bhavan Dept 2021-22 thickness
- 2021-2022 Page 64 with
(on- a existing flooring) of 350bonding chemical and 22/04/21 3:36
22/04/2021 - 33 confirming to IS 15622-2006 (Group Bla) of approved make shade
and pattern for flooring in required position laid on a bed of
bonding chemical filling joints curing and cleaning etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17277 34-1 Providing and applying boiled linseed oil in one coat, to the 25.00 Sq.m
0 new wood work, including knotting, preparing the surface,
scaffolding etc. complete as directed.
17277 34-2 Providing and applying boiled linseed oil in two coats to the 42.00 Sq.m
1 new wood work, including knotting, preparing the surface,
scaffolding etc. complete as directed.
17277 34-3 Providing and applying Wax polish to the new wood work including 54.00 Sq.m
2 knotting, preparing the surface, scaffolding etc. complete as
directed.
17277 34-4 Providing and applying Wax polish to the old wood work including 43.00 Sq.m
3 knotting, preparing the surface, scaffolding etc. complete as
directed.
17277 34-5 Providing and applying French polish for required finish on 120.00 Sq.m
4 previously polished wood including knotting, preparing the
surfaces, scaffolding etc. complete as directed
17277 34-6 Providing and applying french polish to new wood work, for 235.00 Sq.m
5 required finishing including. knotting, preparing the surfaces,
scaffolding etc. complete as directed.
17277 34-7 Providing and applying varnish in one coat on previously varnished 38.00 Sq.m
6 wood work including knotting, preparing the surface, scrapping,
scaffolding, etc. complete.
17277 34-8 Providing and applying Varnish in two coats on new wood work 60.00 Sq.m
7 including knotting, preparing the surface, scaffolding etc.
Complete.
17277 34-9 Providing and applying melamine polish of required finish to 772.00 Sq.m
8 the wood work by spray machine including knotting and
preparing the even surface by scraping, applying French
polish , scaffolding if required etc. complete.
Note:The work to be executed on prior approval of Superintending
Engineer will be necessary.
17277 34-10 Providing and applying coal tar in one coat on previously coal 62.00 Sq.m
9 tarred wood including preparing the surface, scaffolding
etc.complete. (coal tar shall be minimum 300 grams per Square
Metre.)
17278 34-11 Providing and applying coal tar in two coats on new wood 98.00 Sq.m
0 work including preparing the surface, scaffolding etc. complete.
(coal tar shall be minimum 500 grams per Square Metre.)
Specification:
17278 35-1 Providing and applying two coats of lead/zinc base oil paint/ 86.00 Sq.m
1 bituminous paint of approved colour and shade to new wood
work and fiber boards including preparing the surface,
knotting, scaffolding if necessary, excluding primer coat etc.
complete.
17278 35-2 Providing and applying one coat of lead/zinc base oil paint/ 45.00 Sq.m
2 bituminous paint of approved colour and shade to old wood work
previously painted and fiber boards including if necessary
scaffolding, preparing surface excluding primer coat etc. complete.
17278 35-3 Providing and applying two coats of lead/zinc base oil 70.00 Sq.m
3 paint/bituminious paint of approved colour and shade to old wood
work and fiber boards previously painted including if necessary
scaffolding, preparing the surface excluding priming coat etc.
complete.
17278 35-4 Providing and applying two coats of lead/zinc base oil paint/ 86.00 Sq.m
4 bituminious paint of approved colour to new structural steel
work and iron work in buildings including scaffolding if
necessary, cleaning and preparing the surface etc. complete.
(excluding primer coat).
17278 35-5 Providing and applying one coat of aluminium paint of approved 71.00 Sq.m
5 make to new structural steel work in building and workshop
including scaffolding if necessary, cleaning and preparing
surface (excluding primer coat) etc. complete.
17278 35-6 Providing and applying 2 coats of alluminium paint of approved 108.00 Sq.m
6 make to new structural steel work in buildings and workshops
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat)etc. complete.
17278 35-7 Providing and applying two coats of synthetic enamel paint of 84.00 Sq.m
7 approved colour to new /old structural steel work and wood work
in buildings, including scaffolding if necessary, cleaning and
preparing the surface (excluding primer coat) etc. complete.
17278 35-8 Providing and applying one coat of flat oil paint of approved colour 56.00 Sq.m
8 to the old structural steel work and iron work previously
painted in building including scaffolding, if necessary, cleaning
and preparing surface (excluding primer coat) etc. complete.
17278 35-9 Providing and applying two coats of flat oil paint of approved 82.00 Sq.m
9 colour to the old structural steel work and iron work previously
painted in building including scaffolding, if necessary, cleaning
and preparing the surface (excluding primer coat) etc. complete.
Bhavan Dept 2021-22 - 2021-2022 - Page 69 of 350 22/04/21 3:36
22/04/2021 - 35
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17279 35-10 Providing and applying one coat of flat oil paint of approved colour 51.00 Sq.m
0 and shade to internal / external plastered surfaces including
scaffolding if necessary, cleaning and preparing the surface
(excluding primer coat) etc. complete.
17279 35-11 Providing and applying two coats (exterior quality) of flat oil paint 85.00 Sq.m
1 of approved colour and shade to the plastered surface in buildings
and workshops including scaffolding if necessary, cleaning the
surface and preparing surface etc. complete. (excluding primer
coat)
17279 35-12 Providing and applying two coats of flat oil paint of approved 98.00 Sq.m
2 colour and shade to internal / external plastered surfaces
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat) etc. complete.
17279 35-13 Providing and applying two coats of water proof cement paint of 76.00 Sq.m
3 approved manufacture and of approved colour to the plastered
surfaces including scaffolding if necessary, cleaning and preparing
the surface, watering for two days etc. complete.
17279 35-14 Providing and applying two coats of water proof cement paint of 77.00 Sq.m
4 approved manufacture and of approved colour to old plastered
surfaces including scaffolding if necessary, cleaning and preparing
the surface, watering for two days etc. complete.
17279 35-15 Providing and applying three coats of water proof cement paint of 100.00 Sq.m
5 approved manufacture and of approved colour to new plastered
surfaces including scaffolding if necessary, cleaning and preparing
the surface, watering for two days etc. complete.
17279 35-16 Providing and applying three coats of water proof cement paint of 92.00 Sq.m
6 approved manufacture and of approved colour to old plastered
surfaces including scaffolding if necessary, cleaning and preparing
the surface, watering for two days etc. complete.
17279 35-18 Removing old paint from steel and other metal surfaces and 17.00 Sq.m
7 making the surfaces even with hand scrapping, scaffolding etc.
complete.
17279 35-19 Providing and applying priming coat over new wood and 30.00 Sq.m
8 wood based surfaces, including preparing the surface by
thoroughly cleaning oil, grease, dirt and other foreign matter, sand
papering and knotting, scaffolding etc. complete.
17279 35-20 Providing and applying priming coat over new/old steel and 34.00 Sq.m
9 other metal surfaces including preparing the surface by
thoroughly cleaning oil, grease, dirt and other foreign matter
and scoured with wire brushes, fine steel wool, scrappers and
Bhavan Dept 2021-22 sand paper, -scaffolding etc.
- 2021-2022 complete.
Page 70 of 350 22/04/21 3:36
22/04/2021 - 35
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17280 36-2 Providing and applying white-wash in one coat on old / new 7.00 Sq.m
7 plastered or masonry surfaces and asbestos cement sheets
including scaffolding and preparing the surface by brushing and
brooming down etc. complete.
17280 36-3 Providing and applying white-wash in two coats on old / new 11.00 Sq.m
8 plastered or masonry surfaces and asbestos cement sheets
including scaffolding and preparing the surface by brushing and
brooming down etc. complete.
17280 36-4 Providing and applying colour-wash of approved colour and shade 8.00 Sq.m
9 in one coat to new surface including scaffolding, brushing and
brooming down (excluding base coats of white wash) etc.
complete.
17281 36-5 Providing and applying colour-wash of approved colour and 17.00 Sq.m
0 shade in two coats to new surface including scaffolding,
brushing and brooming down (excluding base coat of white-
wash) etc. complete.
17281 36-6 Providing and applying colour-wash of approved colour and shade 7.00 Sq.m
1 in one coat to old surfaces which are to be recoloured including
scaffolding, brushing and brooming down. (excluding base coat of
white wash) etc. complete.
17281 36-7 Providing and applying colour-wash of approved colour and 15.00 Sq.m
2 shade in two coats to old surfaces which are to be
recoloured including scaffolding, brushing and brooming down.
(excluding base coat of white-wash) etc. complete.
17281 36-8 Providing and applying washable powder distemper of approved 18.00 Sq.m
3 colour and shade to old and new surfaces in one coat including
scaffolding, preparing the surfaces (excluding the priming coat)etc.
complete.
17281 36-9 Providing and applying washable powder distemper of approved 27.00 Sq.m
4 colour and shade to old and new surfaces in two coats including
scaffolding, preparing the surfaces. (excluding the primer coat)
etc .complete.
17281 36-10 Providing and applying washable oil-bound distemper of approved 30.00 Sq.m
5 colour and shade to old and new surfaces in one coat
including scaffolding, preparing the surfaces. (excluding the
primer coat.)etc. complete.
17281 36-11 Providing and applying washable oil-bound distemper of approved 45.00 Sq.m
6 colour and shade to old and new surfaces in two coats including
scaffolding, preparing the surfaces. (excluding the primer coat.)
Bhavan Dept 2021-22 etc.
- 2021-2022
complete.- Page 73 of 350 22/04/21 3:36
22/04/2021 - 36
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17282 37-1 Providing and fixing Indian teak wood planking 25 mm thick for 3,045.00 Sq.m
5 flooring plained on both sides, tongued and grooved including
scaffolding, if necessary, and one coat of primer etc. complete.
17282 37-2 Providing and fixing Indian teak wood planking 50 mm thick for 5,951.00 Sq.m
6 flooring plained on both
sides, tongued and grooved including scaffolding, if necessary,
and one coat of primer etc. complete.
17282 37-3 Providing and fixing Indian teak wood joists and girders in timber 1,12,309.00 Cu.M
7 floors of single, double or framed type including scaffolding if
necessary, and one coat of primer etc. complete.
17282 37-4 Providing and fixing Jungle (hard) wood of approved species joists 59,609.00 Cu.M
8 and girders in timber floor of single, double or framed type
including scaffolding if necessary and one primer coat etc.
complete.
17282 37-5 Providing and fixing Indian teak wood plank ceiling 20 mm thick 2,599.00 Sq.m
9 plain underside tongued and grooved including iron screws,
scaffolding, if necessary, including one primer coat on under
side and one coat of coal tar on upper side etc. complete.
17283 37-6 Providing and fixing Indian teak wood framed collar beam / king 1,52,477.00 Cu.M
0 post / queen post truss, with all Iron work including scaffolding, if
necessary, and one coat of primer etc. complete.
17283 37-7 Providing and fixing in teak wood framed collar beam / king post / 87,350.00 Cu.M
1 queen post truss, with all iron work including scaffolding, if
necessary and primer coat etc. complete.
17283 37-8 Providing and fixing country teak wood common rafters, purlins 1,36,588.00 Cu.M
2 and purlin cleats, hip rafters, jack rafters, ridges, wall plates, post
plates and posts for roofing etc. including scaffolding, if necessary,
all iron work and one coat of primer etc. complete.
17283 37-9 Providing and fixing teak wood common rafters, purlins and purlin 70,467.00 Cu.M
3 cleats, hip rafters, jack rafters, ridges, wall plates, post plates
and posts for roofing, etc. including scaffolding, if necessary
all iron work and one coat of primer etc. complete.
17283 37-10 Providing and fixing teak wood hand rail of 60 mm x 75 mm as 1,181.00 Rmt
4 per detailed drawings or as directed by the Engineer, including
french polishing, etc. complete.
(Note : The work to be executed on preapproval of Superintending
Engineer).
Rate In (Rs)
Item Description Rate Unit
17283 37-11 Providing and fixing country teak wood two way trellis work with 1,885.00 Sq.m
5 battens or laths 2.5 cm x 1.2 cm and 5 cm x 5 cm openings
including frame of 8 cm x 5 cm vertical and horizontal scantlings
and coat of primer etc. complete.
17283 37-12 Providing and fixing hard wood of approved species two way 866.00 Sq.m
6 trellis work with battens or laths 2.5 cm x 1.2 cm and 5 cm x 5
cm openings including frame of 8 cm x 5 cm vertical and horizontal
scantlings and coat of primer etc. complete.
17283 37-13 Providing and fixing decorative teak plywood veneer lining 4 mm 1,202.00 Sq.m
7 thick with backing of teak wood frame work of battens 12 mm X
25 mm at 30 cm center to center fixed to walls and pillars with
12 mm thik phywood building without skirting and cornice as
per drawings including necessary iron work and finishing the
exposed wood work with french polish etc. complete.
17283 37-14 Providing and fixing 20 mm thick superior veneer board pelmet 3,760.00 Sq.m
8 box 150 to 200 mm wide to doors or window frames including
20mm dia. Aluminium curtain rod with sockets and finishing
with french polishing (without top)etc. complete.
17283 37-15 Providing and fixing 20 mm thick Laminated sheet board pelmet 3,424.00 Sq.m
9 box 150 to 200mm wide to doors or window frames including
20 mm dia. Aluminium curtain rod with sockets and finishing
with french polishing (without top) etc.complete.
17284 37-16 Providing and fixing Indian teak wood eaves boards 15 cm 630.00 Rmt
0 wide and 25 mm thick plain decorative type including scaffolding
and painting with two coats etc. complete.
17284 37-17 Providing and fixing seasoned and treated jungle wood of approved 439.00 Rmt
1 species eaves board 15 cm wide and 25 mm thick plain decorative
type including scaffolding and painting with two coats etc.
complete.
17284 37-18 Providing and fixing Teak wood eaves plate of size 10cm wide and 332.00 Rmt
2 20 mm thick including scaffolding and painting in two coats etc.
complete.
17284 37-19 Providing and fixing country teak wood barge board 22 cm wide 690.00 Rmt
3 and 20mm thick plain type including scaffolding and painting in
two coats etc. complete.
17284 37-20 Providing and fixing seasoned and treated jungle wood of approved 417.00 Rmt
4 species barge board 22 cm wide and 20 mm thick plain type
including scaffolding and painting in two coats etc. complete.
Rate In (Rs)
Item Description Rate Unit
17284 37-21 Providing and fixing shutter to wall cupboard made from 19 mm 3,281.00 Sq.m
5 thick Teak particle board with approved coloured laminated face
1.5 mm thick bonded with phenol formaldehyde synthetic resin
B.W.P. grade including lipping beading iron oxidised fixtures and
fastening and oil primer coat etc. complete. (Excluding cupboard
frame).
17284 37-22 Providing and fixing Shutter to wall Cupboard consisting of Teak 3,507.00 Sq.m
6 Wood styles and Rails 25 mm thick and 75 mm wide with panel
insert of 12 mm thick particle Board with one approved coloured
Laminated Face on one side 1.5 mm thick, bonded with
Phenol Formaldehyde Synthetic Resin including Lipping
Beading. Iron oxidised fixtures and fastening and oil primer
coat etc. complete. (Excluding cupboard frame).
17284 37-23 Providing and fixing jungle wood ballies of approved species 463.00 Rmt
7 85 mm average dia. for common rafters, purlins, ridges, hip
and valley rafters, jack rafters, wall plates, post plates, posts
etc. including all iron work scaffolding if necessary and oiling in
one coat etc. complete.
17284 37-24 Providing and fixing 100 mm dia. Country teak wood ballies for 317.00 Rmt
8 post truss of 6.00 m. span as per drawing or as directed by
Engineerin-charge including all iron work, scaffolding if
necessary and oiling etc. complete.
17284 37-25 Providing and applying Wax polishing to the old wood work 54.00 Sq.m
9 including knotting, preparing the surface, scaffolding etc. complete
as directed.
17285 37-26 Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling 4,507.00 Sq.m
0 made out of 50 x 25 mm (finished size) C.C.T.W. frame work or
size of 600 x 600 mm center or as per site condition covered by 6
mm thick marine plywood of the generally confiriming to I:S
710-1980 finished with 3.5 to 4 mm thick matching Veneer
of approved color and in satin wallnut groov matched veneer
pattern and design including melamine polishing & design
with antitermite treatment etc. to plywood and woodwork
with ten years guarantee bond etc. including all lead and lifts
complete as per Architects Drawing and instructions of Engineer
Incharge.
Specification:
17285 38-1 Providing and fixing Mangalore tiled roofing with class ’ AA’ tiles 1,072.00 Sq.m
1 including securing the last course of tiles near the eaves with steel
flat 40 mm x 3 mm and 1.22 mm wire fixing 50 mm x 25 mm
horizontal teak wood battens and iron works and oiling the
battens etc. complete. (Excluding ridge and hip tiles).
17285 38-2 Providing and fixing Mangalore tiled roofing with class ’AA’tiles 1,090.00 Sq.m
2 including securing the last course of tiles near the eaves with steel
flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood
sloping battens of 25 x 12 mm teak wood horizontal battens of
50mm x 25mm over the slopping battens, all iron work and coal
tarring the battens etc. complete (Excluding ridge and hip tiles).
17285 38-3 Providing and fixing Mangalore tile ridge and hip tiles of class 281.00 Rmt
3 ’AA’including scaffolding if necessary, pointing with coloured
cement mortar and curing etc. complete.
17285 38-4 Providing and fixing corrugated galvanised iron sheets of 816.00 Sq.m
4 0.63mm thick (24 B.W.G.) for roofing without wind tiles
including fastening with galvanised iron screws and bolts, lead and
bitumen washers as per drawing etc. complete.(Weight of 5.5
Kilogram/sq.m.).
17285 38-5 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 1,085.00 Sq.m
5 B.W.G.) over the ridge hip or valley to galvanized iron sheet
roofing including all fastening and bolt galvanised iron screws and
bolts, lead and bitumen washers etc. complete.(Weight of 6.8
Kilogram/sq.m.).
17285 38-6 Providing and fixing 6.00 mm thick ISI mark Asbestos 402.00 Sq.m
6 Cement Corrugated sheet roofing including galvanised iron ’J’or
’L’hook bolts galvanised iron band bituminous G.I. washers,
galvanised iron clamps, bolts, nuts and scaffolding etc. complete.
17285 38-7 Providing and fixing 6 mm thick ISI mark Asbestos Cement 589.00 Rmt
7 ridge capping for roofing including galvanised iron hooks, bolts,
galvanised iron and bituminous washers, galvanised iron clamps,
bolts, nuts including scaffolding etc. complete.
17285 38-8 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain 2,690.00 Rmt
8 galvanised iron sheets 120 cm wide with teak wood planking 20
mm thick including two coats of coal-tarring the upper
surface of plank etc. complete. (excluding painting to underside of
plank).
17285 38-9 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain 2,044.00 Rmt
9 galvanised iron sheets 90 cm wide with teak wood planking 20
Bhavan Dept 2021-22 mm thick including
- 2021-2022 - two coats of of
Page 79 coal-tarring
350 the upper 22/04/21 3:36
22/04/2021 - 38 surface of plank etc. complete. (excluding painting to underside of
plank).
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17286 38-16 Providing and fixing false ceiling of teak wood particle board half 941.00 Sq.m
6 perforated sheet 12 mm thick including scaffolding, if necessary,
all iron work and two coats of oil painting to boards and beading
i.e. visible surface etc. complete. (excluding frame work and
runners)
17286 38-17 Providing and fixing false ceiling of 10 to 12 mm thick decorative 1,145.00 Sq.m
7 boards of fibrous plaster of paris including scaffolding if necessary
all architectural work like mouldings, cornices, coves, domes, cups
as per detailed drawings and three coats of spray painting
to boards etc. complete. (excluding frame work, runners and mild
steel suspenders).
17286 38-18 Providing and fixing false ceiling of 12mm thick as per drawings 1,450.00 Sq.m
8 including powder coated G.I. wall angle of 20mm x 20mm size,
G.I. grid runners of size 20mm x 38mm at 600mm center to
center both ways and suspended using G.I. 3mm wire
including fixing using butterfly clips and fasteners including
transporting, scaffolding all necessary labour and machinery,
finishing etc. complete.
17286 38-19 Providing and fixing false ceiling of 15mm thick as per drawings 1,642.00 Sq.m
9 including powder coated G.I. wall angle of 20 mm x 20 mm x 0.60
mm size, G.I. grid runners of size 15 mm x 38 mm at 600 mm
center to center both ways and suspended using G.I. 3 mm wire
including fixing using butterfly clips and fasteners including
transporting, scaffolding all necessary labour and machinery,
finishing etc. complete.
17287 38-20 Providing and fixing false ceiling of T.W. partical board half 1,458.00 Sq.m
0 perforated sheets 12 mm thick with frame work of M.S. angle 40 x
40 x 5 mm and T of size 40 x 40 x 6 mm at 60 cm center to center
including 12 mm dia. hangers, T.W. battens 50 x 25 mm and
beading 25 x 15 mm thick scaffolding, if necessary, all iron work
and two coats of painting to boards and beading
i.e. visible surface etc. complete.
17287 38-21 Providing and fixing False ceiling of 12 mm thick Laminated board 2,091.00 Sq.m
1 with frame of M.S. angle 40 x 40 x 5 mm and Tee of size 40 x 40 x
6mm at 60 cm c/c including 12 mm dia. hangers, T.W. battens 50
x 25 mm and beading 25 x 15 mm thick scaffolding if necessary,
all Iron work etc. complete.
17287 38-22 Providing and applying two coats of bitumen to roof on new 147.00 Sq.m
2 dungaree cloth one coat on each side etc. complete as directed.
17287 38-23 Providing and applying one coat of bitumen to roof (without cloth) 46.00 Sq.m
3 including scaffolding etc. complete as directed.
Bhavan Dept 2021-22 - 2021-2022 - Page 81 of 350 22/04/21 3:36
22/04/2021 - 38
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17287 38-24 Removing and resetting Mangalore tiles from roof including refixing 92.00 Sq.m
4 loose battens etc. complete.
17287 38-25 Removing the tiles, battens and dungry cloth purlins, rafters and 69.00 Sq.m
5 ridges etc. from roof, sorting out the serviceable and unserviceable
materials and stacking the same as and where directed in the
compound, scaffolding etc. complete.
17287 38-26 Removing G.I. or A.C. sheet roofing including purlins, principal 86.00 Sq.m
6 rafters etc. including sorting serviceable and unserviceable
materials, stacking the same as and where directed in the
compound including scaffolding etc. complete.
17287 38-27 Removing and lowering the roof truss carefully without damaging 741.00 Per No
7 the members and stacking as and where directed in the compound
including scaffolding etc. complete.
17287 38-28 Removing R.S. girders of any size and span lowering the same and 2,308.00 MT
8 stacking neatly wherever directed in the compound scaffolding etc.
complete.
17287 38-29 Providing fixing country teak wood battens 50 mm x 25 mm for 108.00 Rmt
9 Mangalore tile roof work with all iron work scaffolding and oiling
the battens etc. complete.
17288 38-30 Providing fixing teak wood battens 25 mm x 12 mm for Mangalore 46.00 Rmt
0 tile roof work with iron work scaffolding and oiling the battens etc.
complete.
17288 38-31 Providing and fixing sky light in R.C.C. roof including frame made 1,202.00 Sq.m
1 of M.S. angle 50 x 50 x 6 mm with hold fast, sheet glass 12 mm
thick, Chicken mesh 24 gauge with all accessories and required
fixtures and fastening fitting including painting etc. complete.
17288 38-32 Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. 126.00 Per No
2 length for anchor rods with necessary threading nuts and bolts
etc. complete.
17288 38-33 Providing fixing Mangalore tile roofing with class AA tiles in cement 997.00 Sq.m
3 mortar 1:4 on sloping slab including necessary scaffolding, curing,
finishing, etc. complete.
17288 38-34 Providing and fixing colour coated Zincalume (R) AZ150 (min 1,094.00 Sq.m
4 150 gms/sq.mt. total on each side ) profiled sheets for roofing.
The feed material is manufactured out of nominal 0.45 mm Base
Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with
min.550 MPa yield strength, metallic hot dip coated with
Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)
with COLORBOND ( R ) steel quality super durable polyester paint
coat ( with inorganic pigment). The paint shall have a total
Bhavan Dept 2021-22 coating
- 2021-2022 -
thickness of nominalPage 82 of
35 um, 350
comprising of nominal 25 22/04/21 3:36
22/04/2021 - 38 um exterior coat on top surface and nominal 10 um reverse coat
on back surface. Profile sheet shall have nom. 950-1050 mm
effective cover width and nominal 25-30 mm deep ribs with subtle
square fluting in the five pan at nominal 180-250 mm center-
to-center. The end rib shall be designed for anti-capillary
groove. and return leg. The feed material should have coil
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17289 38-40 Providing and fixing false ceiling with eco-friendly light-weight 2,312.00 Sq.m
0 calcium silicate tiles of spintone surface texture aerolite make or
equivalent of size 595mm x 595mm having 15mm thick densified
micro look edge and 100% humidity resistance incombustible
as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC
and NRC 0.50 placed in true horizontal level suspended grid of
size 600x600mm made from hot dipped G.I. steel sections
ion silhouette profile, rotary stitched double webbed white with
6mm reveal profile (white/black), wherein, main T runner of size
42mmx14mm between main tee 600mm center-tocenter and
secondary cross T of size 33x14x0.43mm thick of length 600mm
long spaced inter-locked at middle of the first crossed T in
each panel to form grid of 1200mmx600mm resting on
periphery wall Profile wall section 19mm (7+7) x
19mmx0.40thicknesses and laying false ceiling for services like
diffusers grills including cutting, making opening for light
fittings, fixtures, , smoke detectors etc., wherever required.
Main T runners suspended from ceiling with using G.I. soffit
cleats of size 25x35x1.6 mm of required length fixed to the ceiling
with 6mm dia and 50mm long dash fastener, 4mm dia G.I.
adjustable rods with powder- coated/good quality G.I. level
adjustment clips of 35x35x0.8mm spaced @1200, center-to-
center along main T all complete at all heights as per the
specifications, drawings and as per
17289 38-41 Providing and fixing self supporting steel roofing system for a 2,081.00 Sq.m
1 Godown or alike made up of structural grade steel sheet of 912
millimeter width ( tolerance +/- 2 millimeter ), moulded at site
using mechanical press dies to the desired curve and shape to
form 605 millimeter wide interlocking panels . The interlocking
panels shall be pressed to close the seam forming water tight
joints for a span of 15.30 meter having arch rise as 3.06 meter,
arch length 17.75 meter. The base material made up of imported
galvalume steel complying to ASTM A792 having base metal
thickness of 0.80 millimeter ( tolerace + / - 0.02 millimeter ) with
alloy coating AZ 150 and paint coating of regular modified
polyster , top coat 25 micron and bottom coat 12 micron as per
approved colour , including fixing hangers , clamps etc.as may be
necessary of Proflex standard, including fixing sky light of 2
millimeter thick polycarbonate sheet of size 2’ x 7’ and turbo
ventilator of 24’’diameter to be installed at every 30 feet along the
length of roof including finishing, testing and cleaning etc.
complete.
Rate In (Rs)
Item Description Rate Unit
17289 38-42 Providing and fixing self supporting steel roofing system for a 2,164.00 Sq.m
2 Godown or alike made up of structural grade steel sheet of 912
millimeter width ( tolerance + / - 2 millimeter ), moulded at site
using mechanical press dies to the desired curve and shape to
form 605 millimeter wide interlocking panels . The interlocking
panels shall be pressed to close the seam forming water tight
joints for a span of 21.30 meter having arch rise as 4.26 meter,
arch length 25.13 meter. The base material made up of imported
galvalume steel complying to ASTM A792 having base metal
thickness of 1.00 millimeter ( tolerace + / - 0.02 millimeter ) with
alloy coating AZ 150 and paint coating of regular modified
polyster , top coat 25 micron and bottom coat 12 micron as per
approved colour , including fixing hangers , clamps etc.as may be
necessary of Proflex standard, including fixing sky light of 2
millimeter thick polycarbonate sheet of size 2’ x 14’ and turbo
ventilator of 24’’diameter to be installed at every 30 feet along the
length of roof including finishing , testing and cleaning etc.
complete.
17289 38-43 Providing and fixing self supporting steel roofing system for a 2,285.00 Sq.m
3 Godown or alike made up of structural grade steel sheet of 912
millimeter width ( tolerance + / - 2 millimeter ), moulded at site
using mechanical press dies to the desired curve and shape to
form 605 millimeter wide interlocking panels . The interlocking
panels shall be pressed to close the seam forming water tight
joints for a span of 25.00 meter having arch rise as 5.00 meter,
arch length 29.00 meter The base material made up of imported
galvalume steel complying to ASTM A792 having base metal
thickness of 1.20 millimeter ( tolerace + / - 0.02 millimeter ) with
alloy coating AZ 150 and paint coating of regular modified
polyster , top coat 25 micron and bottom coat 12 micron as per
approved colour , including fixing hangers , clamps etc.as may be
necessary of Proflex standard, including fixing sky light of 2
millimeter thick polycarbonate sheet of size 2’ x 14’ and turbo
ventilator of 24’’diameter to be installed at every 30 feet along the
length of roof including finishing , testing and cleaning etc.
complete.
17289 38-44 Providing and fixing self supporting steel roofing system for a 2,628.00 Sq.m
4 Godown or alike made up of structural grade steel sheet of 912
millimeter width ( tolerance + / - 2 millimeter ), moulded at site
using mechanical press dies to the desired curve and shape to
form 605 millimeter wide interlocking panels . The interlocking
panels shall be pressed to close the seam forming water tight
joints for a span of 28.75 meter having arch rise as 5.75 meter,
arch length 33.92 meter. The base material made up of imported
Bhavan Dept 2021-22 galvalume
- 2021-2022steel
- complying Pageto ASTM
86 of A792
350 having base metal 22/04/21 3:36
22/04/2021 - 38 thickness of 1.40 millimeter ( tolerace + / - 0.02 millimeter ) with
alloy coating AZ 150 and paint coating of regular modified
polyster , top coat 25 micron and bottom coat 12 micron as
perapproved colour , including fixing hangers , clamps etc.as may
be necessary of Proflex standard, including fixing sky light of 2
millimeter thick polycarbonate sheet of size 2’ x 14’ and turbo
ventilator of 24’’diameter to be installed at every 30 feet along the
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and
beams including rounding of the edges with alluinium T of x 1·
(5·0 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium
sections shall be anodized) including all labour, material, lifts etc.
complete.
Specification:
17290 39-1 Providing and fixing frame with / without ventilator of size as 1,83,483.00 Cu.M
3 specified with Country cut teak wood for doors and windows
including chamfering, rounding, rebating, iron holdfast of size
300mm x 40mm x 5mm with oil painting, etc. complete
17290 39-2 Providing and fixing frame with / without ventilator of size as 1,00,295.00 Cu.M
4 specified with Country non teak wood for doors and windows
including chamfering, rounding, rebating, iron holdfast of size
300mm x 40mm x 5mm with oil painting, etc. complete.
17290 39-3 Providing and fixing the Country cut teak wood second class fully 4,708.00 Sq.m
5 glazed openable fanlight rectangular in shape as per detailed
drawing excluding the frame,stainless steel fixtures and fastenings
and finishing the wood work with 3 coats of oil painting.
17290 39-4 Providing and fixing Country cut teak wood double or single leaf 8,800.00 Sq.m
6 second class fully panelled door shutter with 35mm thick style and
rail with 25 mm thick panels with openable fan light as per detailed
drawings. Excluding the door frame 60mm x 100mm stainless
steel fixtures and fastening and finishing the wood work with
oil painting 3 coats. (Excluding the door frame)
17290 39-5 Providing and fixing Country cut teak wood single leaf panelled 5,419.00 Sq.m
7 door shutter without fanlight and 25mm thick as per drawing
consisting of T.W. top rail size 100mm x 25mm and bottom lock
rail 200mm x 25mm insert pannel 12 mm thick commercial
ply faced T.W. particle board with phenol formaldehyde synthetic
resin (Generally confirming to ISI 3097) excluding frame,
including stainless steel fixture and fastening and T.W.
beading to junctions of panelled inserts and as instructed by the
Engineer in charge including 3 coats of oil painting etc. complete.
17290 39-6 Providing and fixing single leaf panelled door shutter without 7,536.00 Sq.m
8 fanlight and shutter 35 mm thick as per drawing consisting of
T.W. top rail size 100mm x 35 mm and bottom and lock rail
200mm x 35mm insert panel 12 mm thick commercial ply faced
T.W. particle board with phenol formaldehyde synthetic resin
(Generally confirming to ISI 3097) excluding frame, including
stainless steel fixtures fastening and T.W. beading at junction of
panels inserts and as instructed by the Engineer in charge
including 3 coats of oil painting etc. complete.
17290 39-7 Providing and fixing single or double leaf panelled door shutter 6,733.00 Sq.m
9 excluding frame with glazed openable fanlight shutter 35 mm
thick as per detailed drawing consistingpanelled vertical styles
100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and
panels 12 mm thick both side commercial ply faced particle board
Bhavan Dept 2021-22 - 2021-2022 - Page 91 of 350 22/04/21 3:36
including stainless steel fixtures and fastening and T.W. beading at
22/04/2021 - 39
junctions of panel inserts and as instructed by the Engineer in
charge including 3 coats of oil painting etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
stainless steel fixtures and fastening and three coats of oil painting
etc. complete.
17291 39-15 Providing and fixing fully glazed double leaf window shutter 4,329.00 Sq.m
7 with openable fanlight including Country cut teak wood 25
mm thick style and rails with plain / obscured glass panels 5
mm thick as per drawing or as directed by the Engineer in charge
with stainless steel fixtures and fastening and finishing the wood
work with oil painting three coats etc. complete.
17291 39-16 Providing and fixing Country cut teak wood window with double 5,007.00 Sq.m
8 leaf half glazed and half panelled shutter with style 70 x 20 mm
thick rails 95 x 20 mm thick and pannels 15mm thick with
ventilator including wrought iron hold fast, stainless steel
fixtures and fastenings and finishing the wood work with oil
painting 3 coats etc. complete.
17291 39-17 Providing and fixing Country cut teak wood windows with double 6,070.00 Sq.m
9 leaf 25 mm thick planked shutters without ventilators as per
detailed drawings including stainless steel fixtures and
fastenings and finishing the wood work with oil painting 3 coats
etc. complete
17292 39-18 Providing and fixing Country cut teak wood windows / ventilators 7,023.00 Sq.m
0 with double leaf panelled shutters 25 mm thick without
ventilators as per detailed drawing including stainless steel
fixtures and fastenings and finishing the wood work with oil
painting 3 coats etc. complete.
17292 39-19 Providing and fixing steel window of various sizes as per detailed 3,767.00 Sq.m
1 drawing without hot dip zinc coating, without ventilators, including
fabricating / glazing with plain / obscured glass panels of
approved type and quality, iron oxidised fixtures and fastenings,
oil painting two coats complete.
17292 39-20 Providing and fixing steel window of various sizes as per detailed 3,855.00 Sq.m
2 drawing without hot dip zinc coating, without ventilators, including
fabricating / glazing with plain / obscured glass panels of
approved type and quality, iron oxidised fixtures and fastenings,
finishing with oil painting two coats complete (with guard bars 12
mm square at 10 cm c/c.)
17292 39-21 Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 3,481.00 Sq.m
3 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24
gauge single leaf joined by fusion welding at appropriate points
with vertical grooves of 15 mm wide and 15 mm deep at a
distance of 45 mm. The first and last rib should be 60 mm
away from vertical edge of the shutter. the shutter shall be
welded, with angle to from the periphery of the shutter. At the
Bhavan Dept 2021-22 center
- 2021-2022 -
of the frame Page
there shall 93 of 350
be angle welded to bifurcate the 22/04/21 3:36
22/04/2021 - 39 frame into segments with two leaf shutter square 12 mm
square guard bars at 120 mm center with all accessories
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17294 39-38 Providing and fixing in position. (as per I.S.1868 / 1982) 5,536.00 Sq.m
0 Aluminium sliding window of two tracks with rectangular pipe
having overall dimension 63.50 x 38.10 x 1.02 mm at weight
0.547 Kilogram/Running metre. and window frame bottom track
section 61.85 x 31.75 x 1.20 mm at weight 0.695
Kilogram/Running metre. Top and side track section 61.85 x
31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The
shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight
0.417 Kilogram/Running metre. Inter locking section 40 x 18 x
1.10 mm at weight 0.469 Kilogram / Running metre. And
handle section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. and top section 40 x 18 x 1.25 mm
at weight 0.417 Kilogram/Running metre. As per detailed
drawings and as directed by Engineer in charge with all
necessary Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking catch fitted in
vertical section of shutter including 5 mm thick plain glass with all
required screws and nuts etc, complete. With colour Anodising
without box
17294 39-39 Providing and fixing in position. (as per I.S.1868 / 1982) 5,034.00 Sq.m
1 Aluminium sliding window of two tracks with rectangular pipe
having overall dimension 63.50 x 38.10 x 1.02 mm at weight
0.547 Kilogram/Running metre. and window frame bottom track
section 61.85 x 31.75 x 1.20 mm at weight 0.695
Kilogram/Running metre. Top and side track section 61.85 x
31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The
shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight
0.417 Kilogram/Running metre. Inter locking section 40 x 18 x
1.10 mm at weight 0.469 Kilogram/Running metre. And handle
section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running
metre. and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. As per detailed drawings and as
directed by Engineer in charge with all necessary Aluminium
sections fixtures and fastenings such as roller bearing in nylon
casting and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass with all required screws and nuts
etc, complete. With powder coating with box
17294 39-40 Providing and fixing in position. (as per I.S.1868 / 1982) 5,007.00 Sq.m
2 Aluminium sliding window of two tracks with rectangular pipe
having overall dimension ?63.50 x 38.10 x 1.02 mm at weight
0.547 Kilogram/Running metre. and window frame bottom track
section 61.85 x 31.75 x 1.20 mm at weight 0.695
Kilogram/Running metre. Top and side track section 61.85 x
31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The
Bhavan Dept 2021-22 shutter should- be of bearing Page
- 2021-2022 bottom
97 40 x 18 x 1.25 mm at weight
of 350 22/04/21 3:36
22/04/2021 - 39 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x
1.10 mm at weight 0.469 Kilogram/Running metre. And handle
section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running
metre. and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram / Running metre. As per detailed drawings and as
directed by Engineer in charge with all necessary Aluminium
sections fixtures and fastenings such as roller bearing in nylon
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
on flush door and solvent cement adhesive on the PVC lipping etc.
as per direction of Engineer in charge and manufacturers
specification and drawing etc. complete.
17295 39-49 Providing and fixing cold rolled steel hollow door frame 1,834.00 Rmt
0 105mm x 60mm for anysizes including hold fast hinges, tie
members with red oxide and gray paint etc. complete as per
I.S.I. specifications and code of practice prescribed including
anticorrosive treatment as directed by the engineer.
17295 39-50 Providing and fixing in position aluminium openable window 5,011.00 Sq.m
1 of any size as per detailed drawing and as directed by
Engineer in charge with all necessary aluminum sections
including necessary fixtures and fastening with 5 mm thick clear
float glass etc. complete. a) Without powder coating Note While
arriving at the rate of item of item weight at 6.90
Kilogram/Square Metre is considered.
39-51 Providing and fixing in position aluminium openable window of any
size as per detailed drawing and as directed by Engineerincharge
with all necessary alluminium sections including necessary fixtures
and fastening with 5 mm thick clear float glass etc. complete.
17295 39-51-a Colour anodized 5,946.00 Sq.m
2
17295 39-51-b Powder Coated 5,322.00 Sq.m
3
17295 39-52 Providing and fixing in position aluminium fixed window fully 4,759.00 Sq.m
4 glazed of any size as per detailed drawing and as directed by
Engineerincharge with all necessary alluminium sections including
necessary fixtures and fastening such as 5 mm thick clear float
glass etc. complete.
a) Without powder coating. Note While arriving at the rate of
item of item weight at 6.90 Kilogram/Square Metre is
considered.
39-53 Providing and fixing in position aluminium fixed window fully
glazed of any size as per detailed drawing and as directed by
Engineerincharge with all necessary alluminium sections including
necessary fixtures and fastening such as 5 mm thick clear float
glass etc. complete.
17295 39-53-a Colour anodized 5,748.00 Sq.m
5
17295 39-53-b Powder Coated 5,088.00 Sq.m
6
Rate In (Rs)
Item Description Rate Unit
17295 39-54 Providing and fixing in position aluminium partly openable and 5,568.00 Sq.m
7 partly fixed window of any size as per detailed drawing and as
directed by Engineerincharge with all necessary alluminium
sections including necessary fixtures and fastening with 5 mm
thick float glass etc. complete. a) Without powder coating
Note While arriving at the rate of item of item weight at 6.90
Kilogram/Square Metre is considered.
17295 39-55 Providing and fixing in position aluminium partly openable and 6,115.00 Sq.m
8 partly fixed window of any size as per detailed drawing and as
directed by Engineerincharge with all necessary alluminium
sections including necessary fixtures and fastening with 5 mm
thick float glass etc. complete.
b) With powder coating Note While arriving at the rate of item of
item weight at 6.90 Kilogram/Square Metre is considered.
17295 39-56 Providing and fixing M40 grade thick vibrated pull cast or similar 874.00 Rmt
9 type concrete frame with chamfer conforming to I.S. 65241983
having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and
fixing in wall with 6 Nos of hold fast of 12 mm dia bars
500 mm long including primer and oil painting etc, complete)
frame size 60 mm x 100 mm .
17296 39-57 Providing and fixing M40 grade thick vibrated pull cast or similar 948.00 Rmt
0 type concrete frame with chamfer conforming to I.S. 65241983
having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in
wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long
including primer and oil painting etc, complete) frame size 60 mm
x 125 mm
17296 39-58 Providing and fixing fiber glass reinforced polyster door shutter 30 2,937.00 Sq.m
1 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without
ventilator including chromium plated fixtures and fastening
with chromium plated handles on both sides, etc complete
17296 39-59 Providing and fixing fiber glass reinforced polyster door shutter 35 3,127.00 Sq.m
2 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without
ventilator including chromium plated fixtures and fastening
with chromium plated handles on both sides, etc complete.
17296 39-60 Providing and fixing acrylic plastic sheet panels of approved 1,447.00 Sq.m
3 quality in required thickness plain clear or any colour or
obscured linings in lieu of glass pans to doors/windows including
providing and fixing clips, putty etc. complete. (a) 2.00 mm thick.
17296 39-61 Providing and fixing acrylic plastic sheet panels of approved 1,679.00 Sq.m
4 quality in required thickness plain clear or any colour or
obscured linings in lieu of glass pans to doors/windows including
providing and fixing clips, putty
Pageetc.
102complete.
of 350 (b) 3.00 mm thick. 22/04/21 3:36
Bhavan Dept 2021-22 - 2021-2022 -
22/04/2021 - 39
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
providing and fixing clips, putty etc. complete. (b) 3.00 mm thick.
17296 39-62 Providing and fixing 24 gauge plain aluminium sheet on the face 1,075.00 Sq.m
5 of door shutter including cutting to required size and fixing the
screws including making good the damages if any to existing door
shutter and frame etc. complete as directed or as per detailed
drawing
17296 39-63 Providing and fixing in position, Double shuttered aluminium 8,219.00 Sq.m
6 extruded powder coated openable door of specified size with
aluminium door frame of powder coated section 101.60 x
44.75mm , 3.18 mm thick and shutter comprising of powder
coated section having bottom and lock rail of size 150 mm x 44.5
mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm
thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for
shutter plain glass panes 5 mm thick for top panels and 12mm
thick both side laminated phenol bonded particle board panels for
bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic
floor spring of 150Kilogramcapacity , having heavy duty
concealed lock, necessary beading, glazing clips, PVC gaskets,
250mm length aluminium tower bolts, 150mm dia. pad
handle, etc. as per detailed design and drawing or as
directed by engineer in charge including all materials ,
labours, and equipment etc.complete
17296 39-64 Providing and fixing in position, Single shuttered aluminium 7,621.00 Sq.m
7 extruded powder coated openable door of overall size 0.90 m x
2.40 m with aluminium door frame of powder coated section
101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 150 mm
x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00
mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for
shutter plain glass panes 5 mm thick for top panels and
12mm thick both side laminated phenol bonded particle board
panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic
floor spring of 150Kilogramcapacity , having heavy duty
concealed lock, necessary beading, glazing clips, PVC gaskets,
250mm length tower bolts, 150mm diam. pad handle, etc. as per
detailed design and drawing or as directed by engineer in
charge including all materials , labours, and equipment
etc.Complete
17296 39-65 Providing and fixing in position, Single shuttered aluminium 8,706.00 Sq.m
8 extruded powder coated openable door of overall size 0.90 m x
2.40 m with aluminium door frame of powder coated section
101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 150 mm
x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00
Bhavan Dept 2021-22 - 2021-2022 - Page 103 of 350 22/04/21 3:36
mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for
22/04/2021 - 39
shutter plain glass panes 5 mm thick for top panels and
12mm thick both side laminated phenol bonded particle board
panels for bottom panels etc. , I.S.I. mark , with bijagiri having
heavy duty concealed lock, necessary beading, glazing clips,
PVC gaskets, 250mm length tower bolts, 150mm diam. pad
handle, etc. as per detailed design and drawing or as
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17298 39-79 Providing and fixing welded mesh of 11 gauge wires having 2,237.00 Sq.m
1 mesh size 50 mm x 25 mm including M.S Angle frame of size
35 mm x 35 mm x5 mm in position with oil painting 3 coats etc.
complete
17298 39-80 Providing and Fixing 32 mm thick One piece single 4,665.00 Sq.m
2 moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door
shutter for internal use including toilets made up of outer ABS
sheet of 1.2 mm thick having puff insulation of 35 to 40
Kilogram/Cubic Metredensity and 10 mm dia.for steel bars 2 Nos.,
wooden block to receive fixtures, having
M.S. hinges 100 mm length, M.S. handles 150 mm length and 10
mm dia sliding door bolt etc. complete
17298 39-81 Providing and fixing 30mm thick SOLID PANEL PVC 5,776.00 Sq.m
3 INTERNAL DOOR SHUTTER consisting of frame made out of M.S.
tubes of 19 gauge thickness and size of 40mm x 20mm for
stiles ,top, lock and bottom rails. M.S. frame shall have a coat of
steel primers of approved make and manufacture. M.S. frame
shall be covered with 5mm thick heat molded PVC channel
of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide
PVC sheets for top rail, lock rail and bottom rail on either side, and
15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert
for top rail and bottom rail. Paneling of 10 mm thick prelam PVC
sheet to be fitted in the M.S. frame welded / sealed to the stiles
and rails with 30mm wide x 5mm thick PVC sheet beading on
either side, and joined together with solvent cement adhesive
etc. An additional 5mm thick PVC strip of 20mm width is to be
stuck on the interior side of the C Channel using PVC solvent
cement adhesive. including stainless steel fixtures and fastening
Complete as per direction of Engineer in charge, manufacturer’s
specification and drawing.
17298 39-82 Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER 5,845.00 Sq.m
4 consisting of panel of hollow PVC profile of 20 mm thickness
consisting frame made out of M.S. tubes of 19 gauge thickness
and size of 19mm x 19mminserted inside the hollow section of
stiles rails top ?and bottom rails and two 19x 19 mm MS tubes
inserted horizontally inside the hollow profile section using 4/5
mm sheet using screws hollow profile shall be lipped with 10 mm
(5mm x2) thick x 20 mm width on stiles and rails using
solvent cement. The inner panel shall be laminated with 5mm
thick termite proof waterproof plain /prelam PVC sheet using
solvent cement on the both sides of the panel including
stainless steel fixtures and fastening etc. Complete as per
direction of Engineer incharge, manufacturers specification and
drawing.
Bhavan Dept 2021-22 - 2021-2022 - Page 106 of 350 22/04/21 3:36
22/04/2021 - 39
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
drawing.
17298 39-83 Providing and fixing partition 4 mm thick Indian teak Veneer 2,947.00 Sq.m
5 on one side and 6mm commercial type plywood on the other
side including C.T.W. frame of 70 x 35 mm at 60 cm C/C on both
ways, including finishing with French polishing to Veneer face and
oil painting / french polishing to other face etc.complete. (without
skirting)
17298 39-84 Providing and fixing partitions with 12 mm thick three layered flat 3,047.00 Sq.m
6 pressed teakwood particle board both faces commercial bonded
with phenol formal dehyde synthetic resin including CTW
vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and
covering batten of 20 x 10 mm at 1.00 metre apart on both ways
or as directed including finishing with one coat of primer complete.
17298 39-85 Providing and fixing partitions with 12 mm thick three layerd 3,657.00 Sq.m
7 flat pressed teakwood commercial board compressed one
face and other teak veneer bonded with phenol
formaldehyde synthetic resin including CTW vertical 70 x 70 mm
and top and bottom rail of 70 x 35 mm and covering batten of
20 x 10 mm at 1.00 metre apart on both ways or as
directed including finishing with one coat of primer complete.
17298 39-86 Providing and fixing partition with 12mm thick three layered flat 2,745.00 Sq.m
8 pressed veneer teak wood partical board with both faces teak
veneer bonded with phenol formaldehyde synthetic resin including
C.T.W. vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm
and covering battern of 20 x 10 mm at 1.00 metre apart on both
ways or as directed including finishing with one coat of primer
complete.
17298 39-87 Providing and fixing in position C.C.T.W. brackets for weather 1,20,443.00 Cu.M
9 sheds of section 70 x 45 mm with mortise and tenon joinery at
1.2 to 1.5 metre center to center or as directed and teak
wood battens of required section, including fixing three numbers of
iron nut and bolts to each bracket, necessary scaffolding and two
coats of painting to wood work etc. complete.
17299 39-88 Providing and fixing 22 B.W.G. plain galvanised iron sheets 778.00 Sq.m
0 on top of weather shed, including scaffolding, fixing by means
of nut and bolts or as directed etc. complete. (Brackets of 70 x 45
mm to be paid separately)
17299 39-89 Providing and fixing 22 B.W.G. plain FRP sheets on top of 3,301.00 Sq.m
1 weather shed, including
scaffolding, fixing by means of nut and bolts or as directed etc.
complete. (Brackets of 70 x 45 mm to be paid separately)
Rate In (Rs)
Item Description Rate Unit
17299 39-90 Providing and fixing 4 mm thick plain A.C. sheets (of IS std.) 499.00 Sq.m
2 on top of the weather shed including scaffolding, fixing by means
of nuts and bolts or as directed etc. complete as per detailed
drawing (Brackets of 70 x 45 mm to be paid separately).
17299 39-92 Providing and fixing country teak wood runner size 150 x 75 mm 1,137.00 Rmt
3 over partition, including rounding, fixing in the masonry
where necessary beading on sides etc. complete.
17299 39-93 Providing and fixing teak wood cover moulding 45 x 20 mm over 158.00 Rmt
4 doors and windows in the required shape and size as per
drawing, including all mouldings and finishing with french
polishing etc. complete.
17299 39-94 Providing and fixing aluminium grill‘(5.13 Kilogram/Square 2,364.00 Sq.m
5 Metre) decorative of various sizes as per detail drawing and
specification etc. complete. (Prior permission to be obtained from
S.E. before execution of this item) ( 5.13 Kilogram / Square Metre)
17299 39-95 Providing and fixing solid core flush door shutter in double leaf 32 3,373.00 Sq.m
6 mm thick decorative type of exterior grade as per detailed
drawings approved face veneers 3 mm thick on both faces or as
directed, all necessary beads, mouldings and lipping, wrought iron
hold fasts, chromium plated fixtures and fastenings, with brass
mortise lock, chromium plated handles on both sides, and
finishing with French Polish etc. complete.
17299 39-96 Providing and fixing Country teak wood Four leaf paneled 6,988.00 Sq.m
7 shutters, 35 mm thick style and rail and 25 mm thick panels
without ventilator as per detailed drawing excluding the door
frame, stainless steel fixtures and fastening and finishing the
wood work with oil painting 3 coats complete
Specification:
17299 40-1 Providing and fixing mild steel grill work for windows, ventilators 1,650.00 Sq.m
8 etc. 20 Kilogram/Square Metre as per drawing including fixtures,
necessary welding and painting with one coats of anticorrosive
paint and two coats of oil painting complete.
17299 40-2 Providing and fixing mild steel grill work for windows, ventilators, 1,361.00 Sq.m
9 etc. 15 Kilogram/Square Metre as per drawing including
fixtures necessary welding and painting with one coat of
anticorrosive paint and two coats of oil painting complete.
17300 40-3 Providing and fixing mild steel grill railing 20 Kilogram/sq.m with 2,636.00 Sq.m
0 teak wood hand rail of size 75mm x 60 mm.and sill of
75mm.x 25 mm.and newel posts for staircases, including
fabricating, fix-tures, erecting, painting the grill work with one
coat of anti-corrosive paint and two coats of oil painting with
approved colour and polishing the sill, hand rail and the newel post
with french polish.
17300 40-4 Providing and fixing mild steel grill railing 15 Kilogram/sq.m with 2,394.00 Sq.m
1 Ghanateak wood hand rail of size 75mm x 60 mm and sill of
75mm.x 25mm and newel posts for staircases, including
fabricating, fixtures, erecting, painting the grill work with one coat
of anticorrosive paint and two coats of oil painting with approved
colours and polishing the sill, hand rail and the newel post with
french polish.
17300 40-5 Providing and erecting Y type barbed wire fencing with seven rows 767.00 Rmt
2 of wire with 2.45 mm dia G.I. pipe ( Rezan / concenti Deleted ire
0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing
supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c
including fixing and fastening with wire, painting M.S. angles with
one coat of red lead primer and two coat of oil paint etc. complete.
17300 40-6 Providing and fixing 40mm diameter and 1.5 mm thick Stainless 2,054.00 Rmt
3 steel hand railing in S.S.304 Grade including
fabricating ,fixtures, errecting, necessary welding, grinding,
finishing, buffing to stainless steel pipe etc. complete
17300 40-7 Providing and fixing 900mm high S.S.304 Grade Stainless steel 4,114.00 Rmt
4 railing with 40mm diameter and 1.5mm thick at top,40mm
diameter and 1.5mm thick vertical supports spaced at 1.5m
center to center and 8mm thick toughened glass including
fabricating ,fixtures, errecting , necessary welding , grinding ,
finishing, buffing to stainless steel pipe etc. complete
Rate In (Rs)
Item Description Rate Unit
17300 40-8 Providing and Fixing mat finish stainless steel (of 302 grade ) 3,363.00 Sq.m
5 railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia
at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in
three rows, all pipes of 2 mm thick including buffing,fabricating
fixtures and fastening including pipe base of appropriate diameter
and ball base of 75 mm dia above newel post of 75 mm diameter
etc. complete (Prior approval of sample and brand by
Ex.Engineer is necessary before use)
17300 40-9 Providing and fixing mild steel grill railing weighing 15Kilogram/ 2,497.00 Sq.m
6 Square Metre. with teak wood hand rail of size 75mm.x
60mm. and sill 75mm.x 25mm.and posts for verandah
including fabricating, fixtures, erecting and painting the grill
work with one coat of anticorrosive paint and two coats of oil
paint and polishing the grill, hand rail with French polish. Spec.
Number : Bd.U.3
17300 40-10 Providing and fixing mild steel grill railing weighing 15Kilogram/ 2,189.00 Sq.m
7 Square Metre. with PVC handrail cover and newel post for
staircases, including fabricating, fixtures, drilling holes in
concrete / other surface, erecting the grill work, necessary
welding, fixing by nuts and bolts, fixing PVC handrail cover, with
one coat of anticorrosive paint and two coats of oil painting with
approved colour and shade, remaking the damaged surface,
cleaning, etc. complete.
Spec. Number : As directed by Engineer in charge.
17300 40-11 Providing and fixing mild steel grill railing weighing 20Kilogram/ 2,757.00 Sq.m
8 Square Metre. with PVC handrail cover and newel post for
staircases, including fabricating, fixtures, drilling holes in
concrete / other surface, erecting the grill work, necessary
welding, fixing by nuts and bolts, fixing PVC handrail cover, with
one coat of anticorrosive paint and two coats of oil painting with
approved colour and shade, remaking the damaged surface,
cleaning, etc. complete.
Spec. Number : As directed by Engineer in charge.
Specification:
17300 41-41.01 Providing and laying cast iron pipes of B class of 80mm 1,175.00 Rmt
9 diameter with sockets and spigot ends/ flanges and cast
centrifugally / vertically including specials, laying pipes and
back filling the trench complete including excavation.
17301 41-41.02 Providing and laying cast iron pipes of B class of 100mm diameter 1,455.00 Rmt
0 with sockets and spigot ends/ flanges and cast
centrifugally/vertically including specials, laying pipes and back
filling the trench complete including excavation.
17301 41-41.03 Providing and laying cast iron pipes of B class of 150mm diameter 2,833.00 Rmt
1 with sockets and spiget ends/ flanges and cast centrifugally/
vertically including specials, laying pipes and back filling the trench
complete including excavation.
17301 41-41.04 Providing and making lead joints for 80mm diameter cast iron pipe 681.00 Per No
2 line including lead and testing.
17301 41-41.05 Providing and making lead joints for 100mm diameter cast iron 736.00 Per No
3 pipes line including lead and testing.
17301 41-41.06 Providing and making lead joints for 150mm diameter cast iron 797.00 Per No
4 pipe line including lead and testing
17301 41-41.07 Providing and making flanged connection for the 80mm diameter 216.00 Per No
5 cast iron pipe line including painting rubber insertion, nuts and
bolts etc. complete.
17301 41-41.08 Providing and making flanged connection for the 100mm 271.00 Per No
6 diameter cast iron pipe line including painting rubber insertion,
nuts and bolts etc. complete.
17301 41-41.09 Providing and making flanged connection for the 150mm 322.00 Per No
7 diameter cast iron pipe line including painting rubber insertion,
nuts and bolts etc. complete.
17301 41-41.1 Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy 403.00 Rmt
8 grade having embossed as ISI Mark galvanised iron pipes
weight of 1.48 Kilogram/metre with necessary fittings.
remaking good the demolished portion and applying primer of
anti-corrosive oil paint 2 coats Including necessary scaffolding and
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17301 41-41.11 Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy 480.00 Rmt
9 grade having embossed as ISI Mark galvanised iron pipes of 1.93
Kilogram/meter with necessary fitting remaking good the
demolished portion and applying primer of anti-corrosive oil
Bhavan Dept 2021-22 paint, 2 coats- Including necessary
- 2021-2022 Page 111scaffolding
of 350 and removing 22/04/21 3:36
22/04/2021 - 41 existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17304 41-41.32 Providing and fixing 100mm diameter water meter with non-return 32,078.00 Per No
0 valve including strainer, sockets / union nut and including water
meter box making locking arrangements and lock. [Without
chamber].
17304 41-41.4 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass 601.00 Per No
1 including necessary socket union nut complete.
17304 41-41.41 Providing and fixing 20 mm dia. screw down bib/ stop tap of brass 910.00 Per No
2 including necessary socket union nut complete.
17304 41-41.42 Providing and fixing 25 mm dia. screw down bib/ stop tap of brass 1,247.00 Per No
3 including necessary socket union nut complete.
17304 41-41.43 Providing and fixing screw down 15 mm dia. wheeled stop tap of 461.00 Per No
4 brass including necessary sockets/union nut complete
17304 41-41.44 Providing and fixing screw down for 20 mm dia. wheeled 610.00 Per No
5 stop tap of brass including necessary sockets / union nut
complete.
17304 41-41.45 Providing and fixing screw down for 25 mm dia. wheeled 774.00 Per No
6 stop tap of brass including necessary sockets / union nut
complete.
17304 41-41.46 Providing and fixing screw down for 32 mm dia. wheeled 880.00 Per No
7 stop tap of brass including necessary sockets / union nut
complete.
17304 41-41.47 Providing and fixing screw down for 40 mm dia. wheeled 1,058.00 Per No
8 stop tap of brass including necessary sockets / union nut
complete.
17304 41-41.48 Providing and fixing screw down for 50 mm dia. wheeled 1,800.00 Per No
9 stop tap of brass including necessary sockets/ union nut
complete.
17305 41-41.49 Providing and fixing screw down for 65 mm dia. wheeled 2,478.00 Per No
0 stop tap of brass including necessary sockets /union nut
complete.
17305 41-41.5 Providing and fixing screw down for 80 mm. dia. wheeled 4,114.00 Per No
1 stop tap of brass including necessary sockets /union nut
complete.
17305 41-41.51 Providing and fixing 100 mm dia. chromium plated brass showers 470.00 Per No
2 rose to 15mm dia. supply pipe including necessary bend and
socket complete.
Rate In (Rs)
Item Description Rate Unit
17305 41-41.52 Providing and fixing 15mm diameter concussion push button 320.00 Per No
3 type brass/gun metal self- closing tap including necessary socket
complete.
17305 41-41.53 Providing and fixing 25mm diameter concussion push button 432.00 Per No
4 type brass/gun metal self- closing tap including necessary socket
complete
17305 41-41.54 Providing and fixing push cock (Self closing tap) symet type 419.00 Per No
5 of 15 mm dia. including necessary socket, testing etc.
complete.
17305 41-41.55 Providing and fixing push cock (Self closing tap) symet type 431.00 Per No
6 of 20 mm dia. including necessary socket, testing etc.
complete.
17305 41-41.56 Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm 1,209.00 Rmt
7 mild steel flat stringers and steps of 18 mm dia. mild steel
bar for water tank including fixing it in (1:2:4) M-15 cement
concrete block 60cm x 30cm x 30cm and painting the
ladder complete. (Anti Corossive Paint)
17305 41-41.57 Providing and fixing White Glazed Earthenware full stall type 8,829.00 Per No
8 Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting,
inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia.
P.V.C flush pipe with fittings and flushing arrangement including
lead soil pipe, lead trap, soil pipe connectionup to the outside face
of the wall
17305 41-41.58 Providing and fixing White Glazed Earthenware Squatting plate 4,184.00 Per No
9 (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with
fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32
mm dia. P.V.C flush pipe with fittings and flushing arrangement
including lead soil pipe, lead trap, soil pipe connectionup to the
outside face of the wall
17306 41-41.59 Providing and fixing coloured glazed earthenware full stall type 9,036.00 Per No
0 Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting,
inlet pipes and stop tap brackets for fixing the cistern 32mm dia.
P.V.C. flush pipe with fittings and flushing arrangement including
lead soil pipe, lead trap soil pipe connection up to the outside face
of the wall.
17306 41-41.6 Providing and fixing white glazed earthenware lipped flat 4,173.00 Per No
1 back/corner type Urinal with PVC 5 liters flushing cistern with
fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32
mm diameter P.V.C. flush pipe with fitting including lead soil pipe,
lead trap and soil pipe connection up to the outside face of wall.
Rate In (Rs)
Item Description Rate Unit
17306 41-41.61 Providing and fixing coloured glazed earthenware lipped flat 4,173.00 Per No
2 back/corner type urinal with PVC 5 liters flushing cistern with
fittings,capacity with fittings, inlet pipe and stop tap, brackets
for fixing the cistern, P.V.C. flush pipe with fittings including lead
soil pipe, lead trap and soil pipe connection up to the outside face
of the wall.
17306 41-41.62 Providing and laying 100 mm dia. half round white glazed 346.00 Rmt
3 earthenware pipes in 1:5:10 cement concrete bedding including
bends, etc. complete.
17306 41-41.63 Providing and fixing white glazed earthenware Wash Hand 5,582.00 Per No
4 Basin of 55cm. x 40 cm. size including cold water pillar
tap/cold and hot water pillar tap brackets, rubber plugs and brass
chain, stop tap and necessary pipe connections including P.V.C.
waste pipe and trap up to the outside face of the wall. Making
good the damaged surface, testing etc. complete.
17306 41-41.64 Providing and fixing white glazed earthenware Wash Hand 4,947.00 Per No
5 Basin of 45cm x 30cm size including cold water pillar tap/cold
and hot water pillar tap brackets, rubber plugs and brass chain,
stop tap and necessary pipe connection including P.V.C. waste pipe
and trap up to the outside face of the wall. Making good the
damaged surface, testing etc. complete.
17306 41-41.65 Providing and fixing white glazed earthenware Wash Hand 6,421.00 Per No
6 Basin of 63cm x 45cm size including Bib cock stop tap brass
heavy 15mm, brackets, rubber plugs and brass chain, stop tap and
necessary pipe connection including P.V.C. waste pipe and trap up
to the outside face of the wall.
17306 41-41.66 Providing and fixing coloured glazed earthenware Wash Hand Basin 5,157.00 Per No
7 of 55cm x 40 cm size including cold water pillar tap/cold and hot
water pillar tap brackets, rubber plugs and brass chain, stop tap
and necessary pipe connection including P.V.C. waste pipe and trap
up to the outside face of the wall. Making good the damaged
surface, testing etc. complete.
17306 41-41.67 Providing and fixing coloured glazed earthenware Wash Hand Basin 5,297.00 Per No
8 of 45 cm x 30 cm size including cold water pillar tap/cold and hot
water pillar tap brackets, rubber plugs and brass chain, stop tap
and necessary pipe connection including P.V.C. waste pipe and trap
up to the outside face of the wall. Making good the damaged
surface, testing etc. complete.
17306 41-41.69 Providing and fixing White glazed with bottle trap earthenware 6,904.00 Per No
9 Wash Hand Basin of 55x40 cm size including cold water piller
taps, brackets, rubber plugs and brass chain, stop tap,
chromium plate bottle trapPageand
117 necessary
of 350 pipe connections 22/04/21 3:36
Bhavan Dept 2021-22 - 2021-2022 -
including UPAC waste pipe and trap upto the outside face of the
22/04/2021 - 41
wall, making good the damaged surface, testing etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17307 T-42.01 Providing and laying 100mm diameter half round salt glazed 488.00 Rmt
9 stoneware pipes in brick masonry including fittings such as
bends, tees, single junction, necessary excavation and jointing
complete.
17308 T-42.02 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap 1,431.00 Per No
0 in cement concrete 1:4:8 outside the building including cast iron
grating in the sink, connecting glazed stoneware pipe, brick
masonry chamber with cast iron lid and cast iron grating for the
gully trap.
17308 T-42.03 Providing and laying 100 mm dia salt glazed stoneware pipe 320.00 Rmt
1 including fittings such as bends, tees, single junction, double
junctions laying, jointing (including excavation and refilling the
trenches) complete.
17308 T-42.04 Providing and laying for 150 mm dia salt glazed stoneware pipe 395.00 Rmt
2 including fittings Such as bends, tees, single junction, double
junctions laying, jointing (including excavation and refilling the
trenches) complete.
17308 T-42.05 Providing and laying for 225mm dia. salt glazed S.W. Pipe 428.00 Rmt
3 including fitting such as bends, tees, single junction, double
junctions laying, jointing (including excavation and refilling the
trenches) complete
17308 T-42.06 Providing and laying concrete pipes of I.S.NP. class of 100mm 497.00 Rmt
4 diameter in proper line, level and slope including necessary collars,
excavation, laying, fixing with collars in cement mortar 1:1 and
refilling the trench complete.
17308 T-42.07 Providing and laying concrete pipes of I.S.NP. class of 150mm 525.00 Rmt
5 diameter in proper line, level and slope including necessary collars,
excavation, laying, fixing with collars in cement mortar 1:1 and
refilling the trench complete.
17308 T-42.08 Providing and laying concrete pipes of I.S.NP. class of 225mm 554.00 Rmt
6 diameter in proper line, level and slope including necessary collars,
excavation, laying, fixing with collars in cement mortar 1:1 and
refilling the trench complete.
17308 T-42.09 Providing and laying concrete pipes of I.S.NP. class of 300mm 740.00 Rmt
7 diameter in proper line, level and slope including necessary collars,
excavation, laying, fixing with collars in cement mortar 1:1 and
refilling the trench complete.
Rate In (Rs)
Item Description Rate Unit
17308 T-42.1 Providing and constructing Brick Masonry Inspection Chamber 13,096.00 Per No
8 60cm x 45cm x 90cm including 1:4:8 cement concrete
foundation 1:2:4 cement concrete channels half round G.S.W.
pipes, Brick Masonry, plastering from inside and airtight C. I.
cover of 75 Kilogram with lid and frame fixed in cement concrete.
17308 T-42.11 Providing and constructing Brick Masonry Inspection Chamber 14,328.00 Per No
9 90cm x 45cm x 90cm including 1:4:8 cement concrete
foundation 1:2:4 cement concrete channels half round
G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid
cover of 75Kilogramwith lid and frame fixed in cement concrete.
17309 T-42.12 Providing and constructing Brick Masonry Inspection Chamber 8,633.00 Per No
0 60cm x 45cm x 90cm including 1:4:8 cement concrete
foundation 1:2:4 cement concrete channels half round G.S.W.
pipes, Brick Masonry, plastering from inside and with frame fixed in
cement concrete with R.C.C. Cover medium duty 140Kilogramwith
frame etc complete.
17309 T-42.13 Providing and constructing Brick Masonry Inspection Chamber 10,450.00 Per No
1 90cm x 45cm x 90cm including 1:4:8 cement concrete
foundation 1:2:4 cement concrete channels half round
G.S.W.pipes, Brick Masonry, plastering from inside and with frame
fixed in cement concrete with R.C.C. Cover medium duty
140Kilogramwith frame etc complete.
17309 T-42.14 Providing and constructing Brick Masonry inspection Chamber 15,006.00 Per No
2 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4
C.C.channels/half round glazed stoneware pipe channel, salt
glazed stone-ware intercepting trap with rodding pipe set in
1:4:8 cement concrete block, brick masonry plastering inside
and Outside, with C.I. lead cover of 75Kilogramwith frame fixed in
cement concrete.
17309 T-42.15 Providing and constructing Brick Masonry inspection trap Chamber 11,036.00 Per No
3 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4
C.C.channels/half round glazed stoneware pipe channel, salt
glazed stone-ware intercepting trap with rodding pipe set in
1:4:8 cement concrete block, brick masonry plastering inside
and Outside, fixed in cement concrete with R.C.C. Cover
medium duty 140 Kilogram. etc complete
17309 T-42.16 Providing and constructing Brick Masonry Inspection Chamber 8,588.00 Per No
4 60cm x 45cm With R.C.C. raft in B.C. soil area including cost
of reinforcement, 1:2:4 cement concrete channels half round
G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75
mm thick R.C.C. cover medium duty 100Kilogrametc. complete.
Rate In (Rs)
Item Description Rate Unit
17309 T-42.17 Providing and constructing Brick Masonry Inspection Chamber 10,300.00 Per No
5 90cm x 45cm With R.C.C. raft in B.C. soil area including cost
of reinforcement, 1:2:4 cement concrete channels half round
G.S.W. pipes, Brick Masonry, plastering from inside and airtight
with 75 mm thick R.C.C. cover medium duty 140Kilogrametc.
complete.
17309 T-42.18 Providing and fixing hume pipe septic tank 900mm diameter with 15,241.00 Per No
6 vent pipe and cap including necessary (including excavation and
laying)
17309 T-42.19 Providing soak pit of size 120cm x 120cm x 120cm including 2,720.00 Per No
7 excavating and filling with brick-bats.
17309 T-42.2 Providing and fixing 450mm x 550mm size superior type 784.00 Per No
8 Belgium mirror with 16mm dia. nickel plated towel rod etc.
complete.
17309 T-42.21 Providing, laying and fixing P.V.C. pipe of 15mm dia. with 77.00 Rmt
9 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17310 T-42.22 Providing, laying and fixing P.V.C. pipe of 20mm dia. with 104.00 Rmt
0 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17310 T-42.23 Providing, laying and fixing P.V.C. pipe of 25mm dia. with 138.00 Rmt
1 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17310 T-42.24 Providing, laying and fixing P.V.C. pipe of 32mm dia. with 187.00 Rmt
2 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17310 T-42.25 Providing, laying and fixing P.V.C. pipe of 40mm dia. with 277.00 Rmt
3 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
Rate In (Rs)
Item Description Rate Unit
17310 T-42.26 Providing, laying and fixing P.V.C. pipe of 50mm dia. with 362.00 Rmt
4 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17310 T-42.27 Providing, laying and fixing P.V.C. pipe of 75mm dia. with 368.00 Rmt
5 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17310 T-42.28 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with 507.00 Rmt
6 fittings such as bends, tees, reducers, clamps, etc. including
necessary excavation, trench filling etc. complete. Including
removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
17310 T-42.29 Providing and fixing partition with kadappa stone of all sizes and 1,020.00 Sq.m
7 25 mm thick polished on both side and edges to original including
fixing in position in cement mortor 1:4 curing polishing, cleaning
etc complete.
17310 T-42.3 Providing and fixing Orissa type white glazed earthenware 3,402.00 Per No
8 575 mm water closet pan including S trap with earthenware foot
rests, cast iron soil and vent pipe upto outside face of the wall
1:2:4 brick bat lime concrete bedding without flushing tank and its
accessories etc. complete.
17310 T-42.31 Providing and fixing chromium plated towel rod 16 mm dia and 75 267.00 Per No
9 cm. in length including all accessories complete.
17311 T-42.32 Providing and Fixing half turn 25 mm dia gun metal flushing cock 826.00 Per No
0 including all accessories etc. complete.
17311 T-42.33 Providing and fixing 1st class white glazed earthenware Orissa 6,690.00 Per No
1 Type W.C. Pan 580 mm dia including P or S trap cast iron soil and
vent pipe upto the outside face of the wall (1:5:1 0) cement
concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with
all necessary pipe connection etc. complete.
17311 T-42.34 Providing and fixing European type white glazed earthenware 9,702.00 Per No
2 coupled closet symphonic trap with symphonic low level white
glazed 10 litres cistern with black backlite seat with all
necessary pipe connection etc. complete.
17311 T-42.35 Providing and fixing orissa type colour glazed earthenware 625 x 8,758.00 Per No
3 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the
out side face of wall including 100 mm. dia. C.I. plug, bend,
Bhavan Dept 2021-22 15mm. thick 10
- 2021-2022 - litre PVC flushing cistern
Page 123 with all necessary
of 350 22/04/21 3:36
22/04/2021 - T pipe connection etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17313 T-42.59 Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe 424.00 Rmt
7 with necessary fittings, remaking good the demolished portion etc.
complete. Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed
etc. complete.
17313 T-42.6 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe 629.00 Rmt
8 with necessary fittings, remaking good the demolished portion etc.
complete.
17313 T-42.61 Providing and laying in trenches 15 mm dai. CPVC pipe 224.00 Rmt
9 including necessary excavation, fittings. Refilling trenches etc.
complete Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed
etc. complete.
17314 T-42.62 Providing and laying in trenches 20 mm dai. CPVC pipe 251.00 Rmt
0 including necessary excavation, fittings. Refilling trenches etc.
complete. Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed
etc. complete.
17314 T-42.63 Providing and laying in trenches 25 mm dai. CPVC pipe 291.00 Rmt
1 including necessary excavation, fittings. Refilling trenches etc.
complete. Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed
etc. complete.
17314 T-42.64 Providing and laying in trenches 32 mm dai. CPVC pipe 363.00 Rmt
2 including necessary excavation, fittings. Refilling trenches etc.
complete. Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed
etc. complete.
17314 T-42.65 Providing and laying in trenches 40mm dai. CPVC pipe 452.00 Rmt
3 including necessary excavation, fittings. Refilling trenches etc.
complete. Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed
etc. complete.
17314 T-42.66 Providing and laying in trenches 50mm dai. CPVC pipe 651.00 Rmt
4 including necessary excavation, fittings. Refilling trenches etc.
complete. Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed
etc. complete.
17314 T-42.67 Providing and fixing 10 cm PVC nahani trap with grating etc. 492.00 Per No
5 complete.
Rate In (Rs)
Item Description Rate Unit
17314 T-42.68 Providing and fixing reinforced cement concrete cover of size 90 5,089.00 Per No
6 cm x 45 cm with frame over inspection chamber etc. complete.
Heavy duty (225 Kilogram)
17314 T-42.69 Providing and fixing reinforced cement concrete cover of size 90 3,724.00 Per No
7 cm x 45 cm with frame over inspection chamber etc. complete.
Medium duty (140 Kilogram)
17314 T-42.7 Providing and fixing reinforced cement concrete cover of size 60 5,275.00 Per No
8 cm x 45 cm with frame over inspection chamber etc. complete.
Heavy duty (160 Kilogram)
17314 T-42.71 Providing and fixing reinforced cement concrete cover of size 60 3,151.00 Per No
9 cm x 45 cm with frame over inspection chamber etc.
complete.Medium duty (100 Kilogram)
17315 T-42.72 Providing and making ISI Mark ferrule connection of 15 mm dia. 1,139.00 Per No
0 to water main including ferrule coupling cast iron bell mouth
cover, built in non return valve and fixing including
excavation and reinstatement complete.
17315 T-42.73 Providing and making ISI Mark ferrule connection of 20 mm dia. 1,540.00 Per No
1 to water main including ferrule coupling cast iron bell mouth
cover, built in non return valve and fixing including
excavation and reinstatement complete.
17315 T-42.74 Providing and making ISI Mark ferrule connection of 25mm 2,295.00 Per No
2 dia.to water main including ferrule coupling cast iron bell
mouth cover, built in non return valve and fixing including
excavation and reinstatement complete.
17315 T-42.75 Providing and making ISI Mark ferrule connection of 32 mm dia. 3,455.00 Per No
3 to water main including ferrule coupling cast iron bell mouth
cover, built in non return valve and fixing including
excavation and reinstatement complete.
17315 T-42.76 Providing and making ISI Mark ferrule connection of 40mm 4,758.00 Per No
4 dia. to water main including ferrule coupling cast iron bell
mouth cover, built in non return valve and fixing including
excavation and reinstatement complete.
17315 T-42.77 Providing and making ISI Mark ferrule connection of 50 mm dia. 7,694.00 Per No
5 to water main including ferrule coupling cast iron bell mouth
cover, built in non return valve and fixing including
excavation and reinstatement complete.
17315 T-42.78 Providing and fixing stainless steel sink of size 600 x 510 x 15,241.00 Per No
6 200 mm incluidng coupling, outlet pipe, elbow and other
necessary fitting, finishing etc. complete.
Rate In (Rs)
Item Description Rate Unit
17315 T-42.79 Providing and fixing C.P. Angular stop clock with wall flange of 2,562.00 Per No
7 approved make continental including necessary sockets/union nut
etc. complete.
17315 T-42.8 Providing and fixing C.P.Two way BIB cock of approved make 1,306.00 Per No
8 continental including necessary sockets/union nut etc. complete.
17315 T-42.81 Providing and fixing C.P. wall mixer with provision for overhead 3,941.00 Per No
9 shower with 115mm long bend pipe and wall flange of
approved make including necessary sockets/union nut etc.
complete.
17316 T-42.82 Providing and fixing C.P. pillar cock long neck with aerator 1,298.00 Per No
0 of approed make including necessary sockets/union nut etc.
complete.
17316 T-42.83 Providing and fixing C.P. BIB cock with wall flange of approved 1,032.00 Per No
1 make including necessary sockets/ union nut etc. complete.
17316 T-42.84 Providing and fixing C.P. sink cock with raised J" shaped swinging 1,620.00 Per No
2 casted spout ofapproved make including necessary sockets/ union
nut etc. complete."
17316 T-42.85 Providing and fixing P.V.C. Rain water pipes of 160mm outer 1,315.00 Rmt
3 diameter and having wall thickness of 2.2 to 2.7 mm
confirming to I.S. 13592-1992 including proper rainwater
receiving recess with P.V.C. plug, bend, necessary fittings, such as,
offsets, shoes, inluding fixing the pipe on wall using approved
wooden cleats projecting 25mm to 40mm from face of wall a fixing
with clips of approved quality and number ,filing the joint using
rubber gasket with solvent cement and properly resting the
shoe of pipes on C.C. or masonry blocks, including necessary
scaffolding and maintenance for 3 yrs for any leakages or
dislocations of pipes. All the P.V.C. fittings and additional 2 piece
socket clips shall be got approved from engineer in charge etc.
complete.
17316 T-42.86 Providing and fixing European type wall-hung white water 13,011.00 Per No
4 closet of approved make with push valve concealed type with
cover plate 32mm size of approved make including soil pipe, vent
pipe up to outside face of wall ,100mm dia. G.I. plug bend
inlet pipe all fittings, cuttingand making good walls, floors etc.
complete.
17316 T-42.87 Providing and fixing P.V.C. Rain water pipes of 110mm outer 482.00 Rmt
5 diameter and having wall thickness of 2.2 to 2.7 mm
confirming to I.S. 13592-1992 including proper rainwater
receiving recess with P.V.C. plug, bend, necessary fittings, such as,
offsets, shoes, inluding fixing the pipe on wall using approved
Bhavan Dept 2021-22 wooden
- 2021-2022 Pageto
cleats- projecting 25mm 129 of 350
40mm from face of wall a fixing 22/04/21 3:36
22/04/2021 - T with clips of approved quality and number ,filing the joint using
rubber gasket with solvent cement and properly resting the
shoe of pipes on C.C. or masonry blocks, including necessary
scaffolding and maintenance for 3 yrs for any leakages or
dislocations of pipes. All the P.V.C. fittings and additional 2 piece
socket clips shall be got approved from engineer in charge etc.
complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17318 T-43.22 Providing and fixing European type Colour glazed earthenware 9,681.00 Per No
8 water closet pan with UPVC seat and lid with chromium plated
brass hinges and rubber buffers including UPVC and vent pipe up
to the outside face of wall without flushing cistern with flush cock
and with water Jet and necessary fittings including cutting and
making good to the walls and floors testing etc. complete.( prior
approval of sample and brand by Ex. Engineer is necessary before
use)
17318 T-43.23 Providing and fixing Anglo Indian type white glazed earthenware 6,678.00 Per No
9 water closet pan with trap with UPVC seat and lid with
chromium plated brass hinges and rubber buffers including
UPVC and vent pipe up to the outside face of wall with flushing
cistern and necessary fittings including cutting and making good
to the walls and floors testing etc. complete.( prior approval
of sample and brand by Ex. Engineer is necessary before use)
17319 T-43.24 Providing and fixing high level 10 liter capacity with fittings inlet 1,224.00 Per No
0 PVC pipe with stop tap, brackets for fixing the cistern,32 mm dia.
PVC flush pipe with fitting and clamps 20 mm dia. PVC overflow
pipe with mosquito proof couplings, galvanised iron chain and
pulley painting if ordered to cistern pipe etc. and cutting and
making good the damaged wall and testing etc. complete ( Prior
approval of sample and brand by Ex. Engr. is necessary before
use)
17319 T-43.25 Providing and fixing in position UPVC ultra violet stabilized 110 158.00 Per No
1 mm outer diameter cowl dome confirming to I.S.-4985 including
making joints with solvent cement etc. complete
17319 T-43.26 Providing and fixing Glass self 125 mm wide and 600 mm long 332.00 Per No
2 with necessary chromium plated brackets providingT.W.gutties
etc. complete
17319 T-43.27 Providing , constructing and fixing 250 mm dia. Inspection 3,658.00 Per No
3 chamber made up of UPVC material of thickness 3.5 mm and
height of 259 mm with inlet and outlet of 110 mm dia. with 75 mm
dia. U Trap, Ultra shaft pipe of Upvc material having height of 470
mm and fixing Ultra 250 mm dia. UPVC cover and frame in 150
mm thick in c.c.1:2:4, having crushed sand bed of 100 mm
thick of size 550 mm dia. Including excavation and refilling
the sides of chamber by crushed sand cushioning 150 mm
thickness, connecting all required UPVC fittings with rubber
lubricant etc. complete.
17319 T-43.28 Providing , constructing and fixing 450 mm dia. 10,858.00 Per No
4 Inspection chamber made up of Polypropylene / polyethylene
material of thickness 3.5 mm and height of 388 mm with 160 or
Bhavan Dept 2021-22 200
- 2021-2022 Page
mm main- inlet (s) outlet 134
and 110of and
350 / or 160 mm branch 22/04/21 3:36
22/04/2021 - T inlets, with 450 mm dia. Ultra shaft pipe of HDPE material having
height of 460 mm, having R.C.C. cover and frame fixing in 150
mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick
of size 750 mm dia. Including excavation and refilling the sides of
chamber by sand crushed cushioning 150 mm thickness,
connecting all required UPVC fittings with rubber lubricant etc.
complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17320 T-43.34 Providing and fixing 15 mm diameter PVC Aqua kraft type of 629.00 Per No
0 approved make super Two Way bib tap with flange and extender
including all accessories etc complete
17320 T-43.35 Providing and fixing 15 mm diameter PVC Aqua kraft type of 417.00 Per No
1 approved make super push button type cock / tap with flange
including all accessories etc complete
17320 T-43.36 Providing and fixing 15 mm diameter PVC Aqua kraft type of 908.00 Per No
2 approved make super wall sink type tap with flange including all
accessories etc complete
17320 T-43.37 Providing and fixing 15 mm diameter PVC Aqua kraft type of 696.00 Per No
3 approved make super jet spray with flange 2 in 1 faucet 1.50
metre long including all accessories etc complete
17320 T-43.38 Providing and fixing 15 mm diameter PVC Aqua kraft type of 405.00 Per No
4 approved make super right angle stop tap with flange including
all accessories etc complete
17320 T-43.39 Providing and fixing 15 mm diameter PVC Aqua kraft type of 526.00 Per No
5 approved make super Pillar tap with flange including all
accessories etc complete
17320 T-43.4 Providing and fixing ISI 1729/2002 grade 75 mm dia Cast Iron 1,605.00 Rmt
6 Waste Water Pipe with lugs necessary fittings such as bends, tees,
single junction, double junction, slotted vent, offsets on wall or
into the ground including filling joints with cement mortar 1:2
proportion fixing on wall by means by galvanised Mild Steel
bracket of 30 x 5 mm plate and 8 mm square rod with Galvanised
Iron clamp with washer as per design drawing and as directed to
keep pipe 50 mm away from wall including necessary scaffolding
and painting the exposed faces with one coat of red lead oil paint
and two coats of gray oil paint including removing the existing
pipe if necessary and conveying and stacking in PWD Chowky or as
directed by Engineer-in-Charge.
17320 T-43.41 Providing and fixing ISI 1729/2002 grade 100 mm dia Cast 1,867.00 Rmt
7 Iron Soil Pipes With lugs including plug bend necessary fittings
such as bends, tees, single junction, double junction, slotted vent,
offsets on wall or into the ground including filling joints with
cement mortar 1:2 proportion fixing on wall by means of
galvanised Mild Steel bracket of 30 x 5 mm plate and 8 mm
square rod with Galvanised Iron clamp with washer as per
design, drawing and as directed to keep pipe 50 mm away from
wall including necessary scaffolding and painting the exposed faces
with one coat of red lead oil paint and two coats of white oil paint
including removing the existing pipe if necessary and conveying
and stacking in PWD Chowky or as
Page directed
136 of 350 by Engineer-in-Charge. 22/04/21 3:36
Bhavan Dept 2021-22 - 2021-2022 -
22/04/2021 - T
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17320 U-44.01 Guniting by dry mix process as per IS 9012 ( 1978) to ceiling sofit 556.00 Sq.m
9 etc. in C.M. 1:3, 20mm thick under pressure of 2.1Kilogramto 2.8
Kilogramper sq.cm including forms, scaffolding, floating the
surface, curing for 14 days etc. complete (Excluding
reinforcement)
17321 U-44.02 Guniting by dry mix process as per IS 9012 ( 1978) to ceiling sofit 590.00 Sq.m
0 etc. in C.M. 1:3, 25mm thick under pressure of
2.1Kilogramto 2.8Kilogramper sq.cm including forms,
scaffolding,floating the surface, curing for 14 days etc. complete
( Excluding reinforcement)
17321 U-44.03 Guniting by dry mix process as per IS 9012 ( 1978) to ceiling sofit 683.00 Sq.m
1 etc. in C.M. 1:3,40mm thick under pressure of
2.1Kilogramto 2.8Kilogramper sq.m including forms,
scaffolding,floating the surface, curing for 14 days etc. complete
( Excluding reinforcement)
17321 U-44.04 Guniting by dry mix process as per IS 9012 ( 1978) to ceiling sofit 798.00 Sq.m
2 etc. in C.M. 1:3,50mm thick under pressure of
2.1Kilogramto 2.8Kilogramper sq.cm including forms,
scaffolding,floating the surface, curing for 14 days etc. complete
( Excluding reinforcement)
17321 U-44.05 Guniting by dry mix process as per IS 9012 ( 1978) to beams in 591.00 Sq.m
3 C.M. 1:3,20mm thick under pressure of 2.1Kilogramto
2.8Kilogramper sq.cm including forms, scaffolding,floating the
surface, curing for 14 days etc. complete ( Excluding
reinforcement)
17321 U-44.06 Guniting by dry mix process as per IS 9012 ( 1978) to beams in 625.00 Sq.m
4 C.M. 1:3,25mm thick under pressure of 2.1Kilogramto
2.8Kilogramper sq.cm including forms, scaffolding,floating the
surface, curing for 14 days etc. complete ( Excluding
reinforcement)
17321 U-44.07 Guniting by dry mix process as per IS 9012 ( 1978) to 537.00 Sq.m
5 the vertical surface ( other than column) in C.M.
1:3,20mm thick under pressure of 2.1Kilogramto
2.8Kilogramper sq.cm.including forms, scaffolding, floating the
surface curing for 14 days etc.complete ( excluding
reinforcement)
17321 U-44.08 Guniting by dry mix process as per IS 9012 ( 1978) to 569.00 Sq.m
6 the vertical surface ( other than column) in C.M. 1:3,
25mm thick under pressure of 2.1Kilogramto 2.8Kilogramper
sq.cm.including forms, scaffolding, floating the surface curing
Bhavan Dept 2021-22 for 14 days -etc.complete Page
- 2021-2022 138 of reinforcement)
( excluding 350 22/04/21 3:36
22/04/2021 - U
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17322 U-44.18 Providing and fixing lioghtening conductor system comprising of 23,295.00 Per No
6 erecting Air-Termination consisting of tubular copper rod of 25mm
dia. 1.2 mm thick with multiple points head 1.2 mt. long ( Heavy
Duty) welded or clamped to G.I. pipe pole B grade 50 mm
diaof requiired length with M.S. round bnase plate 25 Cm
diam and 10mm thick at bottom embeded in cement concrete
1:3:6 dfoundation of size 45 cm diam x 45 cm Height and
providing earthing with copper earth plate of size 60 x 60 x
0.3 cms with cadmium plated nut bolts to fix earthing strip
burried in specially prepared earth pits 1.5 metre below
ground level with 40Kilogramcharcoal and salt with altemate
layers of charcoal and salt and G.I.pipe 40mm dia 2 meter length
burried in earthe upto earthling plate remining portion above
ground level for watering and refilling comcpete Note- Copper
strip fropm lightening conductor is not considered in this item.
17322 U-44.19 Providing and fixing copper strip 25mm wide and 3mm thick 685.00 Rmt
7 for lightening conductor including fixing with screws required
scaffolding etc.complete Note- Lightening conductor and earthinf
pits is not considered in this item
17322 U-44.2 Providing and fixing in position alluminium strips of size 50mm x 260.00 Rmt
8 3mm for nosing the steps including fixing with screws and raval
plugs, bending and cutting to the required shape and size,
finishing with paint, necessary mortar bedding of 1:3 cement
mortar to get exact line and level including watering and curing
etc.complete
17322 U-44.21 Providing and fixing crimped with G.I. mesh and size 20 mm x 655.00 Sq.m
9 20mm 10 guage to iron angle frame including welding crimp
mesh to angle frame and steel flat, fixing the frame in its
original position and oil painting etc.complete ( excluding cost of
structural steel)
17323 U-44.23 Providig and fixing wleded mesh fabric for guniting of mesh 901.00 Sq.m
0 size 75 mm x 75mm and 10 guage thick including scaffolding
etc.complete
17323 U-44.24 Providing and fixing welded mesh fabric for guniting of mesh size 866.00 Sq.m
1 150mm x 150mm and 10 guage i.e. 3.25mm thick including
scaffolding etc.complete
17323 U-46.01 Removing double country tiled roof with ridge and with battens 107.00 Sq.m
2 and stacking the materials as directed with all leads and lifts,
complete including removing wood work below etc. complete
17323 U-46.02 Removing planking from roof or ceiling and stacking them sa 47.00 Sq.m
3 directed with all leads and lifts etc. complete
Bhavan Dept 2021-22 - 2021-2022 - Page 140 of 350 22/04/21 3:36
22/04/2021 - U
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17323 U-46.03 Removing Queen Post truss from roof and stacking the materials 1,713.00 Per No
4 as directed with all leads and lifts etc. complets
17323 U-46.04 Removing King Post truss from roof and stacking the materials as 1,117.00 Per No
5 directed with all leads and lifts etc. complets
17323 U-46.05 Removing other type truss below 5 metres span from roof 838.00 Per No
6 and stacking the materials as directed with all leads and lifts
etc. complets
17323 U-46.06 Dismantling flat wooden or A.C. Sheet ceiling with frame 58.00 Sq.m
7 work including stacking the materials as directed with all leads,
lifts etc. complete.
17323 U-46.07 Removing cloth ceiling including frame work and stacking the 28.00 Sq.m
8 materials as ditected with all leads, lifts etc. complete
17323 U-46.08 Dismantling brick masonry in Mud and stacking the materials as 249.00 Cu.M
9 directed with all leads, lifts etc. complete.
17324 U-46.09 Dismantling brick masonry in lime or cement mortar and 320.00 Cu.M
0 stacking the materils as directed with all leads, lifts etc.
17324 U-46.1 Dismantling stone masonry in Mud including stacking the materials 256.00 Cu.M
1 as directed with all leads, lifts etc. complete.
17324 U-46.11 Dismantling stone masonry in lime or cement mortar 363.00 Cu.M
2 including stacking the materils as directed with all leads, lifts
etc.
17324 U-46.12 Removing lime or lean cement concrete including stacking 533.00 Cu.M
3 the spoils as directed with all leads, lifts etc, complete.
17324 U-46.13 Removing rich mix cement concrete including stacking the spoils 889.00 Cu.M
4 as directed with all leads, lifts etc, complete.
17324 U-46.14 Removing brick bat coba including stacking the spoils as 605.00 Cu.M
5 directed with all leads, lifts etc, complete.
17324 U-46.15 Removing doors and windows with frames and stacking the 149.00 Per No
6 materials as directed with all leads, lifts etc. complete.
17324 U-46.16 Removing ventilators and small windows with frame and stacking 127.00 Per No
7 the materials with all leads, lifts etc. complete.
17324 U-46.17 Removing wooden or A.C. partition including frame work and 39.00 Sq.m
8 stack-ing the materials as with all leads, lifts etc. complete.
17324 U-46.18 Removing teak wood trellies work with frame including stacking 32.00 Sq.m
9 the materials as directed with all leads, lifts etc. complete.
Rate In (Rs)
Item Description Rate Unit
17325 U-46.19 Removing cement tiles, or marble or polished shahabad floor or 43.00 Sq.m
0 dado without bed concrete including stacking the materials as
directed with all leads, lifts etc. complete
17325 U-46.21 Dismantling wooden floor including beams and joists, stacking the 35.00 Sq.m
1 materials as directed with all leads, lifts etc. complete.
17325 U-46.23 Removing mud plaster including disposing of the spoils as directed 15.00 Sq.m
2 with all leads, lifts etc, complete.
17325 U-46.24 Removing wire fencing with wooden post and stacking the material 47.00 Rmt
3 with all leads, lifts etc. complete.
17325 U-46.25 Removing wire fencing with iron/ C.C. fencing post and stacking 64.00 Rmt
4 the materials as directed with all leads, lifts etc. complete.
17325 U-46.26 Removing iron pipe raling having wooden R.C.C. or C.C. or 66.00 Rmt
5 iron post and stacking the materials as directed etc. complete.
17325 U-46.27 Removing earthen, stonewate pipe and stacking them as 21.00 Rmt
6 directed with all leads, lifts etc. complete.
17325 U-46.28 Removing cast iron or wrought iron or A.C. pipe and stacking 21.00 Rmt
7 them as directed with all leads, lifts etc. complete.
17325 U-46.29 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials 1,387.00 Cu.M
8 such as steel etc. as directed and stacking them within the
specified lead as directed etc. complete.
17325 U-46.3 Removing Np-2 and Np-3 class pipes including stacking at 242.00 Rmt
9 road side as directed by the Engineer in charge. Upto 900mm
dia. etc complete.
17326 U-46.31 Removing Np-2 and Np-3 class pipes including stacking at 313.00 Rmt
0 road side as directed by the Engineer in charge. Upto 900mm
dia and above. etc complete.
17326 U-46.32 Removing single country tiled roof with battens and stacking the 67.00 Sq.m
1 materials as directed with all leads and lifts etc. complete.
17326 U-46.33 Removing battens from roof and stacking them as directed 8.00 Rmt
2 with all leads and lifts etc. complete.
17326 U-46.34 Removing matting from roof and stacking as directed with all 19.00 Sq.m
3 leads and lifts etc. complete.
17326 U-46.35 Removing purlins from roof including stacking as directed with all 20.00 Rmt
4 leads , lifts etc. complete.
17326 U-46.36 Removing rafters from roof including the materials as 20.00 Rmt
5 directed with all leads , lifts etc. complete.
Rate In (Rs)
Item Description Rate Unit
17326 U-46.37 Removing cloth partition with frame work and stacking the 18.00 Sq.m
6 materials as directed with all leads , lifts etc. complete.
17326 U-46.38 Providing and fixing Jute Kantan (Tarat) screen to the 60.00 Sq.m
7 scaffold-ing for external guniting as directed including removing
the same after the work is over etc. complete.
17326 U-46.39 Providing and erecting chain link fencing 1.6 M. height with G.I. 2,062.00 Rmt
8 chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm
above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size,
includind excavating pits for foundation and embedded in C.C.
block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c
with iron bar 16mm dia as hold fast including welding link with
angle frame at 30 cm c/c with nuts and bolts and horizontal M.S.
Angles at top and bottom of 25 x 25 x 5 mm size and vertical
M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross
support of 40 x 40 x 6 mm angles both side at every corner or
bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x
670 mm including 3 coats of oil painting etc. complete.
17326 U-46.4 Removing urinal pans or wash hand basins with frame including 91.00 Per No
9 disconnecting the sanitary and water supply connections,
removing the same carefully and stacking the serviceable
materials as and where directed including throwing the
unserviceable materials outside etc complete
17327 U-46.41 Removing W.C. pans including disconnecting the sanitary and 198.00 Per No
0 water supply connections, removing and breaking flooring and
bed con-crete around pan removing the same carefully and
stacking the serviceable materials as adn where directed
including throwing the unserviceable materiasls out side etc.
carefully and throwing out the refusal outside etc. complete.
17327 U-46.42 Providing and fixing double scaffolding system (cup lock 197.00 Sq.m
1 type) on the exterior side of building/structure, including
additional rows of scaffolding in stepped manner as per
requirement of site, made with 40mm dia M.S. tube, placed
1.5 metre centre to centre, horizontal & vertical tubes joint with
cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps
and staircase system in the scaffolding for working platform etc.
and maintaining it in a serviceable condition for execution of
work of cleaning and/ or pointing and/ or applying chemical
and removing it thereafter. The scaffolding system shall be
stiffened with bracings, runners, connecting with the
building etc, wherever required, if feasible, for inspection of
work at required locations with essential safety features for the
workmen etc., complete as per directions and approval of
Engineer-in-charge. Note:- (1) The elevational area of the
Bhavan Dept 2021-22 - 2021-2022 - Page 143 of 350 22/04/21 3:36
scaffolding shall be measured for payment purpose. (2) The
22/04/2021 - U
payment will be made once only for execution of all items for such
works.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17327 U-46.5 Replacement of damaged Tower Bolt 300 mm Chromium 166.00 Per No
9 plated of approved quality and make to door/window shutter
including removing existing the same in original position
making proper adjustment for smooth operation etc.
complete as per sample approved by Engineer in-charge.
17328 U-46.51 Replacement of damaged Alluminium Handle 125 mm of 160.00 Per No
0 approved quality and make to door/window shutter including
removing existing the same in original position making proper
adjustment for smooth operation etc. complete as per sample
approved by Engineer in-charge.
17328 U-46.52 Replacement of damaged Lock of approved quality and make 197.00 Per No
1 to cupboard and doorwer including Removing and Refixing
with necessary screw, making proper adjustment for smooth
operation etc. complete as per sample approved by Engineer
in-charge.
17328 U-46.53 Removing chockes and leakages from down take G.I/CI/PVC pipe 300.00 Per No
2 line on walls floor level by using zoola / scaffolding and rectify the
same for functioning with all lifts etc. complete.
17328 U-46.54 Manualy clearing the chockes from under ground drainage line 47.00 Rmt
3 including Inspection chambers with the help of required tools for
propre functioning line chamber to chamber etc. complete.
17328 U-46.55 Manualy clearing by removeing the chockes from Nahni Trap, Gully 177.00 Per No
4 Trap, Wash basin unit, Sink and WC with the help of required tools
for proper functioning the same etc. complete.
17328 U-46.56 Filling tiles joint portion of flooring and dado filling with white 218.00 Sq.m
5 cement by removing existing loose morter/ cement slurry from
joint with tools and finish with washing cleaning and curing etc.
complete.
17328 U-46.57 Providing and fixing 6 mm thick commercial plywood with jungle 987.00 Sq.m
6 wood frame work of 50 x 35 mm size at 60 cm on both ways for
closing the window portion/openings for protection from falling
debris, dust etc. including cutting, fixing with nails and removing
after the same after completion of the work. (To be used after
approval of Superintending Engineer)
17328 U-46.58 Removal of plants / ficus grown by pulling out root system 188.00 Per No
7 embedded in masnory, cutting stem and application of
high/gur/lime formulation as specified by the Architect or
other patented chemical biocide treatment such as biocide
’Glycel’ (iso proplamine salt of glyphosate) or other chemical as
specified by the Engineer in charge etc. complete.
Rate In (Rs)
Item Description Rate Unit
17328 U-46.59 Lowering down the debris obtained from breaking and removing 680.00 Cu.M
8 the cement plaster / burnt brick masonry of the first floor by any
means without causing dust nuisance and damage to structure,
stacking the same as and where directed including cleaning the
site complete.
Specification:
17328 47-1 Providing & Applying chemical for cleaning the exposed steel 4,019.00 Sq.m
9 structure, TMT bars, etc. of structure by grinding the surface by
grinder machine, wire brush, removing existing corrosion from the
metal also removing loose particles, of the area by water jet,
(using other mechanical / manual means) and apply on prepared
surface of DuraGuard- as corrosion preventive coat on prepared
TMT bars, steel structure,metal surface etc. to protect it from
corrosion etc. as per manufacturer’s specification ( using other
manual / mechinical means) after that Providing and
applying high abrasive resistant, self curing, UV
resistant,impermeable ,high strength, non shrink, Poly Ironite
Ceramic Cementatious (PICC) repair mortar resurfacing on
concrete surface of thickness up to 10 mm including
breaking honey comb area, (using manual/mechanical
means) , clean the concrete surface with special chemical clonon
with pressure water jet for removing of algae fungi, apply bond
coat Kelox water misible epoxy before PICC application with all
leads and lifts, Material, Machinery, labour, scaffolding, etc.
complete as per specification and as directed by
engineer-in-charge.
17329 47-2 Providing and grouting the holes by Poly Ceramic Cementitious 80.00 kg
0 i.e NicGrout G 06 + 53 grade cement material of as per
requirement to reduce the porosity of concrete / Masonry
structure and to increase the strength of structure using grouting
pipes , grouting m/c, mixer etc and all relevant safety with all
leads and lifts, material, machinery, labour, etc. Complete as per
specification and as directed by Engineer-in-Charge.
17329 47-3 Providing and applying high abrasive resistant, UV 1,537.00 Sq.m
1 resistant,impermeable ,self curing,high strength, non shrink,
Poly Ironite Ceramic Cementatious (PICC) repair mortar for
water proofing on concrete surface with thickness up to 5
mm, , apply bond coat Kelox Water Misible epoxy before
PICC application (using manual/mechanical means) and
Providing and Applying PCC up to 50 mm thickness for
desire slope to drain the water and kept ponded for
continuous period of 3 days to detect any seepage / leakage/
dampness if any, the surface then shall be cleared, complete
as per specification including cost of all materials, machinery,
labour, insurance charges as directed by the Engineer in charge.
17329 47-6 Providing & Applying DuraClean- WR for cleaning the TMT 1,534.00 Sq.m
2 bars, steel structure etc. of structure by Waterjet cleaning/
grinding the surface by grinder machine, wire brush, removing
Bhavan Dept 2021-22 existing corrosion
- 2021-2022 - from the Page
metal147
surface also removing
of 350 22/04/21 3:36
22/04/2021 - 47 loose particles(using other mechanical / manual means) and
apply on prepared surface of DuraGuard - as corrosion
preventive coat on prepared TMT bars, steel structure,metal
surface etc. to protect it from corrosion etc. as per
manufacturer’s specification ( using other manual / mechinical
means) complete as per specification including cost of all
materials, machinery, labour, insurance charges as directed by
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Specification:
17329 48-1 Providing and constructing non load bearing wall with 200mm 1,911.00 Sq.m
9 Horizontally perforated clay hollow blocks of approved make with
compressive strength not less than 35 Kilogram/Sqcm, U value of
47.0 W/m2K, Water Absorption of 15%, masonry to be done using
fine aggregate (natural sand/crushed sand VSI grade finely
washed etc.) cement mortar 1:6 with blocks of size 400mm x
200mm x 200mm (12.5 bricks per Square Metre. excluding
mortar joint thickness) including cost of materials, labour
charges, scaffolding, curing at all heights, complete as per
specifications & directions of Engineer-in Charge. Cost shall be
inclusive of filling the Blocks with Cement mortar at exposed
junctions and filling with concrete using 12mm down size
aggregates at Window and door Jambs for fixing hold fast, anchors
etc.
17330 48-2 Providing and constructing non load bearing wall with 150mm 1,607.00 Sq.m
0 Horizontally perforated clay hollow blocks of approved make with
compressive strength not less than 35Kilogram/Sqcm, U value of
47.0 W/m2k, Water Absorption of 15%, with cement mortar 1:6
with blocks of size 400mm x 150mm x 200mm (12.5 bricks
per Sq.m excluding mortar joint thickness) including cost of
materials, labour charges, scaffolding, curing at all heights,
complete as per specifications & directions of Engineer-in Charge.
Cost shall be inclusive of filling the Blocks with Cement mortar at
exposed junctions and filling with concrete using 12mm down
size aggregates at Window and door Jambs for fixing hold fast,
anchors etc.
17330 48-3 Providing and constructing non load bearing wall with 100mm 1,398.00 Sq.m
1 Horizontally perforated clay hollow blocks of approved make with
compressive strength not less than 35Kilogram/Sq.cm, U value of
47.0 W/m2k, Water Absorption of 15%, with cement mortar 1:6
with blocks of size 400mm x 100mm x 200mm (12.5 bricks
per Square Metre. excluding mortar joint thickness) At every
5th course level, Concrete band of 100mm thick with 1:3:6 Mix
Concrete along with Nominal Reinforcement to be provided. The
rate inclusive of cost of materials, labour charges, scaffolding,
curing at all height, complete as per specifications & directions of
Engineer-in Charge. Cost shall be inclusive of filling the
Blocks with Cement mortar at exposed junctions and filling with
concrete using 12mm down size aggregates at Window and door
Jambs for fixing hold fast, anchors etc.
Rate In (Rs)
Item Description Rate Unit
17330 48-4 Providing and laying 18 mm thick ADONI BROWN LEATHER FINISH 3,779.00 Sq.m
2 stone for flooring, machine cut in required size, approved shade,
color and texture laid using white cement slurry over 20 mm
(average) thick base of cement mortar 1:4 followed by laying,
fixing and jointed with white cement slurry mixed with
matching pigment, including rubbing and curing moulding and
polishing to edge to give high gloss finish etc complete. The
application rate for tile adhesives shall be as per
manufacturer’srecommendations. as per detail drawing. The rate
shall be inclusive of all labour, material, wastage, scaffolding,
transportation, taxes, including all leads, lifts at all levels and as
directed by Engineer in charge. Complete.
a) Flooring
17330 48-5 Providing and laying 18 mm thick ADONI BROWN LEATHER FINISH 4,763.00 Sq.m
3 stone for flooring, machine cut in required size, approved shade,
color and texture laid using white cement slurry over 20 mm
(average) thick base of cement mortar 1:4 followed by laying,
fixing and jointed with white cement slurry mixed with
matching pigment, including rubbing and curing moulding and
polishing to edge to give high gloss finish etc complete. The
application rate for tile adhesives shall be as per
manufacturer’srecommendations. as per detail drawing. The rate
shall be inclusive of all labour, material, wastage, scaffolding,
transportation, taxes, including all leads, lifts at all levels and as
directed by Engineer in charge.
Complete.
a) Skirting
17330 48-6 Providing and Laying factory made coloured chamfered edge 1,050.00 Sq.m
4 Cement concrete grass paver blocks of required
strength,thickness & size/shape, made by table vibratory method
using PU mould, laid in required colour & pattern over 50mm
thick compacted bed of fine fine aggregate (natural
sand/crushed sand VSI grade finely washed etc.), compacting and
proper embedding/laying of inter locking paver blocks into the fine
aggregate (natural sand/crushed sand VSI grade finely washed
etc.) bedding layer through vibratory compaction by using plate
vibrator, filling the joints with fine aggregate (natural
sand/crushed sand VSI grade finely washed etc.) and cutting
of paver blocks as per required size and pattern, finishing
and sweeping extra fine aggregate (natural sand/crushed sand VSI
grade finely washed etc.) and complete as per manufacturer
spsecifications & direction of Engineer-in-Charge. 60mm thick CC
paver block of M-35 grade concrete with approved colour and
design & pattern.
Bhavan Dept 2021-22 - 2021-2022 - Page 152 of 350 22/04/21 3:36
22/04/2021 - 48
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17331 48-13 Providing and applying 2 Coats of high quality acrylic 149.00 Sq.m
1 copolymer matt latex low VOC emulsion paint of approved
shadethat gives smooth, flat and washable and durable finishing of
approved make. Paint should have good flow levelling property
with good colour retention and incan antibacterial property.
Paint has to be applied on smooth and uniform surface
prepared by an acrylic copolymer low VOC & Odour putty. This
surface should be primed with water based low VOC acrylic
copolymer based primer sealer that has incan antibacterial
property. The work activity should cover all aspects of
applying paints from surface preparation, filling to erecting
and dismantling of scaffolding, finishing the surface etc as
directed by Engineer in charge.
17331 48-14 Providing and applying 2 Coats of 100% Pure acrylic low VOC 210.00 Sq.m
2 water based paint with to withstand for period of atleast 5 years
of approved make. Paint should provide durable long lasting silk
finish with high resistance to UV and resistance to spreading
of flame. Paint should protect against concrete carbonation with R
value of minimum 600 and ability to built cracks upto min
0.7mm. The paint has to be applied on High quality water
based acrylic copolymer primer with good alkali resistance
properties. With all leads and lifts at all levels etc. complete, as
directed by Engineer in charge.
17331 48-15 Providing and applying impression 24 carrat Luxury paint of 187.00 Sq.m
3 approved make & approved brand Emulsion paint to interior
walls and ceilings of approved quality, colour and shade to new
surface in two coats, including sub surface prparation by
Acrylic putty and Acrylic primer coats including scaffolding,
preparing the surface. etc. complete (Low VOC).
17331 48-16 Providing and applying antipeel paint of approved make & 210.00 Sq.m
4 approved brand exterior Emulsion paint of approved quality,
colour and shade to old and new surface in two coats, including
exterior acrylic primer coat, scaffolding, preparing the surface etc.
complete (Heat Reflective Paint).
17331 48-17 Providing and applying top coat exterior paint to terrace of 91.00 Sq.m
5 approved make, shade and quality and one coat of primer
before applying textured paint including scaffolding if
necessary preparing surface by throughly cleaning of oil, grease,
dirt and other material and fine aggregate (natural sand/crushed
sand VSI grade finely washed etc.) preparing as required, etc.
complete.
Rate In (Rs)
Item Description Rate Unit
17331 48-18 Providing & laying water proof treatment of terrace slab with B.B. 1,537.00 Sq.m
6 Coba in all position with an average thickness of 150mm
consisting specialised materials as per the manufactures
specifications and covering 10 years guarantee on court fee
stamp paper including all lead, lift, etc. complete.
17331 48-19 Providing and applying two coats of High Albedo paint having 250.00 Sq.m
7 minimum Solar Reflective Index (SRI) 108 (with solar reflectance
& thermal emittance tested as per ASTM) C 1549 and ASTM C
1371 respectively, VOC less than 10 cc/gm. The coating
thickness and the methodology of application shall strctly as per
manufacturer’sspecifitions and as approved by engineer in charge.
Surface preparation includes cleaning with metal wire brush to
remove all dust, fungus etc, washing with water all complete.The
contractor shall give guarantee for the performance of SRI and
also the durabitity of coating, all complete as per direction
of Engineer - in- incharge.
17331 48-20 Bamboowood paneling or paneling and glazing in paneled and 3,762.00 Sq.m
8 glazed shutters for doors of 25 to 40mm thick. Providing &
fixing in position Phenol bonded Bamboowood paneling of
10mm thick, in 25 to 40 mm thick paneled or paneled and glazed
shutters for doors, windows, clerestorey windows in approved
colous, texture & finishi. The bamboo wood planks shall have
minimum density of 1000 Kilogram/cum & minimum Hardness
1000 Kilogramf. The panels shall have profiled interlocking system
locked in place with bamboo pins, all complete as per direction of
the Entgineer inchargeand (Area of opening for panel inserts
excluding portion inside grooves or rebates)
17331 48-21 Bamboowood paneled or paneled and glazed Shutters of 5,641.00 Sq.m
9 Doors Providing of fixing, in position Phenol bonded
Bamboowood panelled or paneled and glazed shutters for
doors, windows, clerestorey windows with pre-molded 30mm
thick planks, in approved colous, texture & finish. It shall
have 10mm wide, 25mm deep grove to fit inpanels. The
bamboowood shall have minimum density of 1000 Kilogram/cum,
minimum Hardness 1000 Kilogramf. All styles and rails shall
have profiled interlocking system locked in place by bamboo
pins, all complete as per direction of Engineer in-charge (The
paneling will be paid for separately)
17332 48-22 Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl 9,935.00 Sq.m
0 Chloride) having multi- chambered outer frame section (73 x
50)mm with an outer wall thickness of 2mm & steel
reinforcement, multi-chambered slider frame (73x 60) mm
with steel reinforcement, multi- chambered slider sash (46x
Bhavan Dept 2021-22 82) mm with -steel reinforcement
- 2021-2022 designed
Page 156 of 350 to give optimum 22/04/21 3:36
22/04/2021 - 48 strength, 5 mm thick toughened double glass with 12 mm spacer
of good quality including alluminium track, Inter-locking
profile, coextruded beadings, EPDM gaskets,silicon
sealent,sliding handle, fixtures and fastenings (couplings, hinges)
including with all required screws and nuts with all necessary
U.P.V.C. sections as per the detailed drawing and as directed
by Engineer-In-Charge etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17332 48-31 Providing and fixing white glazed urinal of series with 10,839.00 Per No
9 Pressmatic auto closing valve of having 32mm diameter P.V.C.
flush pipe with fitting and flushing of approved make and
arrangement including lead soil pipe, lead trap & soil pipe
connection upto the outside face of wall etc.complete as directed
by Engineer in charge.
17333 48-32 Providing and fixing wall hung white wash basin of size 6,395.00 Per No
0 350x450x165mm with approved make pillar cock, C.P. Angular
stop cock long thread approved make continental including SS
bottle trap of approved make having necessary pipe connection up
to the outside face of the wall etc complete as directed by Engineer
in charge.
17333 48-33 Providing and fixing Shower Head with shower arm of approved 17,207.00 Per No
1 make shower tube hand shower with divertor of spout
including all necessary pipe fittings and connections etc.
complete as directed by Engineer in charge.
17333 48-34 Providing and fixing Shower Head, with shower arm of approved 6,973.00 Per No
2 make mixer of including all necessary pipe fittings and
connections etc. complete as directed by Engineer in charge.
17333 48-35 Providing and fixing Oval Type Under Counter Wash Hand Basin of 19,577.00 Per No
3 420 x 590 x 195mm size with pillar cock, C.P.Angular stop
cock, long thread of approved make continental including SS
bottle trap of necessary pipe connection up to the outside
face of the wall, having Telephonic Black / Colour Granite of
180 mm thick fixed on Black Kadappa Framework, etc.
Complete as directed by Engineer in charge.
17333 48-36 Providing and fixing Table top white wash basin of size 24,600.00 Per No
4 120x635x405mm rubber plugs and brass chain, with pillar cock,
C.P.Angular stop cock long thread, continental including S.S.
bottle trap of approved make having necessary pipe connection up
to theoutside face of the wall.etc complete as directed by Engineer
in charge.
17333 48-37 Providing and fixing white Opal series European type 24,600.00 Per No
5 wall-hung, of size 400mmx370mmx575mm with approved
make flush valve including soil pipe, vent pipe upto outside face of
wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting &
making good walls, floors etc as directed by Engineer in charge.
17333 48-38 Providing and fixing Orissa Pan of size 580x445x260 mm with 7,496.00 Per No
6 approved make flush valve including trap, C.I. soil and vent pipe
upto outside face of wall including 100mm dia. C.I. plug, bend
and necessary pipe connection, etc complete. As directed by
Engineer in charge. Page 158 of 350 22/04/21 3:36
Bhavan Dept 2021-22 - 2021-2022 -
22/04/2021 - 48
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Engineer in charge.
17333 48-39 Providing and fixing C.P. a 2-Way BIB cock with wall flange of 2,482.00 Per No
7 approved make including necessary sockets/ union nut etc.
complete as directed by Engineer in charge.
17333 48-40 Providing and fixing white wash basin with half pedestal of size 11,521.00 Per No
8 515mmX615mmX460mm including pillar cock auto-closing system
CP angular stop cock long thread of approved make continental
including S.S. bottle trap of necessary pipe connection upto the
outside face of the wall.
17333 48-41 Providing and fixing white european type wall-hung pan, of size 31,969.00 Per No
9 350mm x 355mm x 570 mm concealed flush tank with
floor-mounting frame installing kit and drain pipe connection set
for wall hung WC, with approved make square control plates
including soil pipe, vent pipe upto the outside face of wall,
100mm dia C.I. plug bend inlet pipe all fittings,cutting &
making good walls, floors etc. complete.
17334 48-42 Providing and fixing Orissa type white glazed earthenware water 3,526.00 Per No
0 closet pan of size 260mm x 440mm x 580mm with approved
make Slim wall hung cistern with installation kit including S or P
trap with cast iron soil and vent pipe upto outside face of the wall
1:2:4 brick bat lime concrete bedding without flushing tank and its
accessories etc.complete.
17334 48-43 Providing and fixing white glazed urinal of size 16,788.00 Per No
1 710x460x300mm with sensotronic concealed type flushing valve
for urinal with complete kit having fittings, inlet pipe with stop tap,
brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe
with fitting and flushing arrangement including lead soil pipe, lead
trap & soil pipe connection upto the outside face of wall etc
complete.
17334 48-44 Providing and fixing of approved make white aquafree Waterless 18,898.00 Per No
2 Urinal of with cartride size of 31.5x33x60cm including other
necessary fittings etc. complete.
17334 48-45 Providing and fixing wall-hung white wash basin of size 9,246.00 Per No
3 470x575x190mm of approved make half pedestal, pillar cock,
C.P.Angular stop cock, long thread continental including S.S. bottle
trap of having necessary pipe connections up to the outside
face of the wall.etc complete.
17334 48-46 RWH - Shallow Percolation Pit providing, constructing 2.0m deep 54,075.00 Per No
4 shallow depth percolation pit comprising of 1.0m dia pre-cast RCC
rings, 300mm thick side filling around outside of RCC rings
(annular space) with 40mm size boulders including filling of
Bhavan Dept 2021-22 percolation
- 2021-2022pit- up to 0.5m depth
Page (from
159 ofbottom
350 up) with 25-75mm 22/04/21 3:36
22/04/2021 - 48 clean washed gravels followed by 0.5m depth of 10-25mm of clean
washed stones followed by 0.5m of washed river fine aggregate
(natural sand/crushed sand VSI grade finely washed etc.)
including netlon mesh between each gravel/fine aggregate
(natural sand/crushed sand VSI grade finely washed etc.) media
layer including covering with RCC slab, manhole frame &
cover, PVC rungs etc. including arrangement for inlet & outlet
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17334 48-49 Supplying, assembling, lowering and fixing in vertical position 503.00 Rmt
7 in bore well, unplasticized PVC medium well-casing pipe of
150mm dia, conforming to IS:12818, including required hire
and labour charges, fittings & accessories etc. all complete,
for all depths, as per the direction of Engineer in charge.
17334 48-50 Supplying, assembling, lowering and fixing in vertical position 340.00 Per No
8 in bore well, unplasticized PVC medium well screen pipes with
ribs of 100mm dia, conforming to IS:12818, including required
hire and labour charges, fittings & accessories etc. all complete,
for all depths, as per the direction of Engineer in charge.
17334 48-51 Supplying, filling, spreading & leveling stone boulders of size range 760.00 Cu.M
9 5cm to 20cm in recharge pit, in the required thickness, for all
leads & lifts, all complete as per the direction of Engineer-
in-charge.
17335 48-52 Supplying, filling, spreading & leveling gravels of size range 5mm 1,300.00 Cu.M
0 to 10mm, in the recharge pit, over the existing layer of boulders,
in required thickness, for all leads & lifts, all complete as per
direction of Engineer-incharge.
17335 48-53 Supplying, filling, spreading & leveling coarse fine aggregate 1,321.00 Cu.M
1 (crushed sand VSI grade finely washed etc.) of size range 1.5mm
to 2mm in recharge pit, in required thickness over gravel layer, for
all leads & lifts, all complete as per direction of Engineer in charge.
17335 48-54 Gravel packing in tubewell construction in accordance with 1,330.00 Cu.M
2 IS:4097, including providing gravel: fine/ medium/ coarse, in
required grading & sizes as per the actual requirement, all
complete as per direction of Engineer in charge.
17335 48-55 Providing and Fixing Sun Louvre panels roll formed, 0.6mm 7,446.00 Sq.m
3 thick, pre-painted stove enameled aluminium strip of a
corrosion resistant alloy, including necessary fitting etc.
complete, as directed by Engineer in Charge.
17335 48-56 Providing & fixing heat insulation by wrapping the pipes with glass 231.00 Rmt
4 wool/asbestos fibre rope or tape/videoflex 32 mm as directed by
Engineer in charge.
17335 48-57 Providing & fixing heat insulation by wrapping the pipes with glass 177.00 Rmt
5 wool/asbestos fibre rope or tape/videoflex 25 mm as directed by
Engineer in charge.
17335 48-58 Providing & fixing heat insulation by wrapping the pipes with glass 143.00 Rmt
6 wool/asbestos fibre rope or tape/videoflex 15 mm as directed by
Engineer in charge.
Rate In (Rs)
Item Description Rate Unit
17335 48-59 CoolMortar - Providing & fixing 40mm thick CoolMortar 3,383.00 Sq.m
7 for insulation which has proportioned blend of white cement,
well-graded fine aggregate (natural sand/crushed sand VSI grade
finely washed etc.) and selected assortment of fine metal and
mineral stabilizers to provide a heat barrier including filling joints,
curing and cleaning complete. The rate shall be inclusive of all
labour, material, scaffolding, transportation, taxes, including all
leads, lifts at all levels and shall be as directed by Engineer in
charge.
17335 48-60 Bamboowood 10mm thick Wall Cladding including Threshold & 7,232.00 Sq.m
8 T-mold - Providing & fixing in position Phenol bonded
Bamboowood wall cladding at all height with planks of sizes
10mm thick, 1900mm length (minimum) and 135mm wide
approved colour, texture and finish, having Performance
Appraisal Certificate (PAC) issued by Building materials &
Technology Promotion Council (BMTPC). with necessary profiled
edges fixed with BR nails to frame work made of second class teak
wood of size 50 x 50mm in centre and ends of each tile. The
bamboowood cladding shall be laid over teak wood frame
and hold in place by 50mm thick teak wood placed in centre of
two teak wood and backlayment and covered with 1.00mm thick
expanded poly ethylene foam of density 25 Kilogram / cum in
two layers first layer on wall surface before fixing wooden frame
and second layer on frame under cladding. The Bamboowood
planks shall have minimum density of 1000 Kilogram/cum &
minimum Hardness 1000 Kilogramf. with Eco friendly UV
coating, all complete as per direction of Engineer in-charge.
17335 48-61 Bamboowood 10mm thick Wall Cladding including Threshold & 6,764.00 Sq.m
9 T-mold for Accoustic purpose Providing & fixing in position
Phenol bonded Bamboowood wall cladding at all height with
planks of sizes 10mm thick, 1900mm length (minimum) and
135mm wide approved colour, texture and finish, having
Performance Appraisal Certificate (PAC) issued by Building
Materials & Technology Promotion Council (BMTPC) with necessary
profiled edges fixed with BR nails to frame work made of second
class teak wood of size 50 x 50 mm in centre and ends of each
tile. The bamboowood cladding shall be laid over glass wool of
50mm thickness filled in between two teak wood frame and hold in
place by 50mm thick teak wood placed centre of two teak wood
and covered with mesh (rabbit) fixed to teak woodframe work with
wire nails as backlayment and covered with 1.00mm thick
expanded poly ethylene foam of density 25Kilogram/cum in
two layers first layer on wall surface before fixing wooden
frame and second layer on frame under cladding. The
Bhavan Dept 2021-22 Bamboowood
- 2021-2022 - planks shallPage
have
162 minimum
of 350 density of 1000 22/04/21 3:36
22/04/2021 - 48 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco
friendly UV coating, all complete as per direction of Engineer
in-charge.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
5
17337 49-F-5 Plastizer (Rheobuild) 825 RMt. 159.00 litre
6
17337 49-F-6 Concrete Spacer Block 15 mm 3.00 Per No
7
17337 49-F-7 Concrete Spacer Block 20 mm 3.00 Per No
8
17337 49-F-8 Concrete Spacer Block 25 mm 3.00 Per No
9
17338 49-F-9 Concrete Spacer Block 30 / 40 mm 5.00 Per No
0
17338 49-F-10 Anticorrrisive Primer Coat 161.00 litre
1
17338 49-F-11 Swaling Coat 140.00 litre
2
49-F-12 PVC Coated GI Wire
49-F-13 Repairs to cut ends and damages with special liquid epoxy
17338 49-F-14 Epoxy paint 380.00 litre
3
17338 49-F-15 R.C.C.Jali 80mm thick 760.00 Sq.m
4
49-G Building (Bd-G : Brick Work)
17338 49-G-1 I’st Class Bricks (Red) 6.00 Per No
5
17338 49-G-2 AAC Block 600x200x100 mm 52.00 Per No
6
17338 49-G-3 Jointing Mortar 20.00 kg
7
17338 49-G-4 Fly ash Bricks 6.00 Per No
8
49-H Building (Bd-H : Stone Masonry)
17338 49-H-1 Corner stone 38*20*30cm 87.00 Per No
9
17339 49-H-2 Khandakies 76.00 Per No
0
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17347 49-O-1 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) 285.00 litre
8
17347 49-O-2 Synthetic paint (ready mix) 263.00 litre
9
17348 49-O-3 Catonic emulsion paint 335.00 kg
0
17348 49-O-4 White oil paint 100ml pack tin 41.00 Per No
1
17348 49-O-5 Red Oxide paint 171.00 litre
2
17348 49-O-6 Cement paint 64.00 kg
3
17348 49-O-7 Steel Primer 177.00 litre
4
17348 49-O-8 Primer for plaster surface 199.00 litre
5
17348 49-O-9 Putty 29.00 kg
6
17348 49-O-10 Boiled linseed oil 80.00 litre
7
17348 49-O-11 Linseed oil double boiled 123.00 litre
8
17348 49-O-12 Terpentine 98.00 litre
9
17349 49-O-13 Wood Primer 138.00 litre
0
17349 49-O-14 Brush for lettring 43.00 Per No
1
17349 49-O-15 Brush for road marking 5cm 99.00 Per No
2
17349 49-O-16 Brush for marking road 8cm 191.00 Per No
3
17349 49-O-17 Brush for road marking 10cm 227.00 Per No
4
17349 49-O-18 Lustre paint 227.00 litre
5
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
3
49-Q Building (Bd-Q : Wood work)
17351 49-Q-1 Country Teak Wood 1,02,750.00 Cu.M
4
17351 49-Q-2 Ghana teak wood 85,600.00 Cu.M
5
17351 49-Q-3 Teak Wood planks above 2.5 m length 92,000.00 Cu.M
6
17351 49-Q-4 Teak wood bidding 1/2" * 1/2" 21.00 Rmt
7
17351 49-Q-5 T.W.Balli 100 mm dia 185.00 Rmt
8
17351 49-Q-6 Jungle wood (non teak) normal 37,750.00 Cu.M
9
17352 49-Q-7 Bamboo 25mm dia.(4.5 to 6m) 23.00 Per No
0
17352 49-Q-8 Bamboo 50mm dia. 26.00 Per No
1
17352 49-Q-9 Bamboo Matting 1.2*1.8m 59.00 Sq.m
2
17352 49-Q-10 Ply wood 12mm thick 451.00 Sq.m
3
17352 49-Q-11 Ply wood 6mm thick 340.00 Sq.m
4
17352 49-Q-12 Mica laminate as per ISI 0.1 mm thick 832.00 Sq.m
5
17352 49-Q-13 Face Veneel board 4 mm thick 478.00 Sq.m
6
17352 49-Q-14 Particle board B.W.P.Phinol bond 12mm thick 372.00 Sq.m
7
17352 49-Q-15 Particle board B.W.P.Phinol bond 19 mm thick 642.00 Sq.m
8
17352 49-Q-16 Formica 1.5 mm thick 985.00 Sq.m
9
17353 49-Q-17 Tower bolt brass oxidised 10 mm dia length 150 mm 211.00 Per No
0
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
8
17354 49-R-13 Mangalore Glass tiles 383.00 Per No
9
17355 49-R-14 Mangalore Pattern cowl Ventilator 245.00 Per No
0
17355 49-R-15 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured 735.00 Sq.m
1 Sheet
17355 49-R-16 G.I. Pre coated Ridge Sheet 529.00 Rmt
2
17355 49-R-17 Gypsum powder 20.00 kg
3
17355 49-R-18 Aluminium Alloy plate 2mm thick 1,385.00 Sq.m
4
17355 49-R-19 Aluminium sheeting fixed with encapsuled lens type reflective 164.00 kg
5 sheeting including 2% towards lettering , cost of angle iron, cost of
drilling holes , nuts, bolts etc. and signs as applicable.
17355 49-R-20 Plaster Of Paris 235.00 bag
6
17355 49-R-21 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm 383.00 Sq.m
7
17355 49-R-22 Acoustic Board 12 mm thick 271.00 Sq.m
8
17355 49-R-23 Gypsum Board 12.5 mm thick 207.00 Sq.m
9
17356 49-R-24 UPVC 3 layer trapezoidal 2.00 mm sheet 835.00 Sq.m
0
17356 49-R-25 Light weight calcium silicate tile of size 595 x 595 mm of texture 988.00 Sq.m
1 spin stone / cosmos / plain / Glode fine fissured.
17356 49-R-26 Bioguard Board 16 mm 1,013.00 Sq.m
2
17356 49-R-27 Ultima tile 1,269.00 Sq.m
3
17356 49-R-28 Optra tile 1,630.00 Sq.m
4
17356 49-R-29 Proflex Sheet 1 mm 85.00 kg
5
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
1
17360 49-T-10 G.I.Screw 25mm 16.00 Dozen
2
17360 49-T-11 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 76.00 Per No
3
17360 49-T-12 Tower bolt Aluminium 10mm dia.length 250mm 85.00 Per No
4
17360 49-T-13 Tower bolt Aluminium 10mm dia.length 200mm 73.00 Per No
5
17360 49-T-14 Tower bolt M.S. Chromium plated 10mm dia,length 300mm 81.00 Per No
6
17360 49-T-15 Tower bolt M.S. Chromium plated 10mm dia,length 200mm 75.00 Per No
7
17360 49-T-16 Cold Rolled Steel Hollow Section Door frame 1829*610mm 1,850.00 Per No
8
17360 49-T-18 Aluminium stay 25cm 70.00 Per No
9
17361 49-T-19 Aluminium stay 30cm 80.00 Per No
0
17361 49-T-20 Jali fly proof 245.00 Sq.m
1
17361 49-T-21 Jali chicken mesh 65.00 Sq.m
2
17361 49-T-22 Jali welded mesh 25*25* 13 Guage 173.00 Sq.m
3
17361 49-T-23 Jali welded mesh 25*25* 11 Guage 268.00 Sq.m
4
17361 49-T-24 Jali welded mesh 50*25 13 Guage 193.00 Sq.m
5
17361 49-T-25 Jali welded mesh 50*25 11 Guage 330.00 Sq.m
6
17361 49-T-26 Hold fast Iron 300*40*5mm 70.00 Per No
7
17361 49-T-27 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length 110.00 Per No
8
17361 49-T-28 Glass plain 3mm 325.00 Sq.m
9
Bhavan Dept 2021-22 - 2021-2022 - Page 178 of 350 22/04/21 3:36
22/04/2021 - 49
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
9
17362 49-T-29 Glass plain 5mm 461.00 Sq.m
0
17362 49-T-30 Glass obscured (bajara) 5mm 485.00 Sq.m
1
17362 49-T-31 G.I. Nut Bolt 105.00 kg
2
17362 49-T-32 Housing box to rolling shutter 1,312.00 Sq.m
3
17362 49-T-33 Mechanical Gear For Rolling Shutter 2,106.00 Per No
4
17362 49-T-34 Mortice lock superior 831.00 Per No
5
17362 49-T-35 Solid Core commercial shutter 30mm thick phenol bonded 867.00 Sq.m
6 with face veneer 3 mm thick both side
17362 49-T-36 Iron washer 12mm to 16mm 1.00 Per No
7
17362 49-T-37 Aluminium Section 189.00 kg
8
17362 49-T-38 Nylon / PVC Gasket 29.00 Rmt
9
17363 49-T-39 Alluminium Screw 32 x 6 mm, 25 x 6 mm 25.00 Dozen
0
17363 49-T-40 Concealed locking arrangement of 100 mm length for sliding 125.00 Per No
1 window
17363 49-T-41 Alluminium Grill 7.50 mm thick 1,160.00 Sq.m
2
17363 49-T-42 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark 1,118.00 Per No
3
17363 49-T-43 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia 87.00 Per No
4
17363 49-T-44 Powder and Chemicals for colour anodizing process of 45.00 kg
5 alluminium sections
17363 49-T-45 Lock for Sliding Shutter 134.00 Per No
6
17363 49-T-46 All Bearing Roller 99.00 Per No
7
Bhavan Dept 2021-22 - 2021-2022 - Page 179 of 350 22/04/21 3:36
22/04/2021 - 49
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
7
17363 49-T-47 All Frame Rail Angle 219.00 kg
8
17363 49-T-48 Welding Electrodes 5.00 Per No
9
17364 49-T-49 C.R.C. Sheet 563.00 Sq.m
0
17364 49-T-50 Abstrone Butadyne Styrine (ABS) Door Shutter including 648.00 Per No
1 Transportation
17364 49-T-51 Puff Insulation 35-40 Kg/Cumt. Density 281.00 kg
2
17364 49-T-52 PVC Door Shutter 34 mm thick Factory Made Shutter 3,919.00 Sq.m
3
17364 49-T-53 FRP Door Shutter 30 mm thick Factory Made Shutter 1,258.00 Sq.m
4
17364 49-T-54 FRP Door Shutter 35 mm thick Factory Made Shutter 1,377.00 Sq.m
5
17364 49-T-55 Bison Pannel 478.00 Sq.m
6
17364 49-T-56 PVC factory made solid panel door shutter with stainless steel 3,813.00 Sq.m
7 fixutres & fastening
17364 49-T-57 PVC factory made flush door 30 mm with stainless steel fixutres & 3,758.00 Sq.m
8 fastening
17364 49-T-58 Sliding door bolt Chromium plated 250mm 83.00 Per No
9
17365 49-T-59 Acrylic Plain Sheet 3 mm 853.00 Sq.m
0
17365 49-T-60 Aldrop Stainless steel 300*16mm 358.00 Per No
1
17365 49-T-61 Aldrop Stainless steel 250*16 mm 308.00 Per No
2
17365 49-T-62 Handle 150mm Stainless Steel (Rounded Shape) 31.00 Per No
3
17365 49-T-63 Handle 200mm Stainless Steel (Rounded Shape) 71.00 Per No
4
17365 49-T-64 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) 42.00 Per No
5
Bhavan Dept 2021-22 - 2021-2022 - Page 180 of 350 22/04/21 3:36
22/04/2021 - 49
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
5
17365 49-T-65 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 70.00 Per No
6
17365 49-T-66 Housing box to rolling shutter 1,465.00 Sq.m
7
17365 49-T-67 Mechanical Gear For Rolling Shutter 2,168.00 Per No
8
17365 49-T-68 Door Stopper Stainless Steel 143.00 Per No
9
17366 49-T-69 Tower Bolt Stainless Steel 200 mm 85.00 Per No
0
17366 49-T-70 Tower Bolt Stainless Steel 250 mm 142.00 Per No
1
17366 49-T-71 Sliding Door Bolt Stainless Steel 250 mm 100.00 Per No
2
17366 49-T-72 Handle Stainless Steel 100 mm 42.00 Per No
3
17366 49-T-73 Eye Hole Lens 215.00 Per No
4
17366 49-T-74 Rolling Shutter 1,950.00 Sq.m
5
17366 49-T-75 Ply Wood 414.00 Sq.m
6
17366 49-T-76 Stainless steel hooks and eyes 200 mm 73.00 Per No
7
17366 49-T-77 Steel Window 52.00 kg
8
17366 49-T-78 Powder Coating 469.00 Sq.m
9
17367 49-T-79 Rubber Lining 26.00 Rmt
0
17367 49-T-80 Ply wood 9 mm thick 426.00 Sq.m
1
17367 49-T-81 Laminated board double 12mm thick 828.00 Sq.m
2
17367 49-T-82 Alluminium Section anodized 232.00 kg
3
Bhavan Dept 2021-22 - 2021-2022 - Page 181 of 350 22/04/21 3:36
22/04/2021 - 49
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
3
17367 49-T-83 Handle iron oxidised 150 mm 59.00 Per No
4
17367 49-T-84 Hinges iron oxidised 100 mm 43.00 Per No
5
17367 49-T-85 T. W. Particle board, both face laminated 12 mm 416.00 Sq.m
6
17367 49-T-86 Battens T.W. 70 x 45 mm 83,500.00 Cm
7
17367 49-T-87 Nuts and Bolts 110.00 Per No
8
17367 49-T-88 Plain FRP Sheet 22 B.W.G. 2,405.00 Sq.m
9
17368 49-T-89 TW Runner (6" x 3") 84,250.00 Cm
0
17368 49-T-90 Alluminium Screw 8.00 Dozen
1
17368 49-T-91 F Patti 193.00 kg
2
17368 49-T-92 Teak wood planks above 2.5m length 94,500.00 Cu.M
3
17368 49-T-93 Vision Panel 224.00 Per No
4
17368 49-T-94 Solid core shutter 35 mm thick with commercial veneer facing and 1,237.00 Sq.m
5 phenol bonded
17368 49-T-95 Oil Paint 281.00 litre
6
17368 49-T-96 Acrylic Plain Sheet 2 mm thick 733.00 Sq.m
7
17368 49-T-97 Aluminium Sheet 24 B.W.G 393.00 Sq.m
8
17368 49-T-98 Alluminium Section with Powder Coating 215.00 kg
9
17369 49-T-99 Concealed lock 138.00 Per No
0
17369 49-T-100 Mosquito proof Nylone net 224.00 Sq.m
1
Bhavan Dept 2021-22 - 2021-2022 - Page 182 of 350 22/04/21 3:36
22/04/2021 - 49
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
1
17369 49-T-101 Solid Core commercial shutter 30mm thick phenol bonded with 945.00 Sq.m
2 face veneer 3 mm thick both side with bidding patty
49-V Building (Bd-V : Water supply and sanitory fittings)
17369 49-V-1 G.I. Pipe 100mm dia. Medium type 823.00 Rmt
3
17369 49-V-2 G.I. Pipe 100mm dia. Heavy type 1,090.00 Rmt
4
17369 49-V-3 G.I. Pipe 15mm dia. Medium type 145.00 Rmt
5
17369 49-V-4 G.I. Pipe 15mm dia. Heavy type 178.00 Rmt
6
17369 49-V-5 G.I. Pipe 20mm dia. Medium type 170.00 Rmt
7
17369 49-V-6 G.I. Pipe 20mm dia.Heavy type 200.00 Rmt
8
17369 49-V-7 G.I. Pipe 25mm dia. Medium type 208.00 Rmt
9
17370 49-V-8 G.I. Pipe 25mm dia. Heavy type 277.00 Rmt
0
17370 49-V-9 G.I. Pipe 32mm dia. Medium type 255.00 Rmt
1
17370 49-V-10 G.I. Pipe 32mm dia.Heavy type 298.00 Rmt
2
17370 49-V-11 G.I. Pipe 40mm dia. Medium type 305.00 Rmt
3
17370 49-V-12 G.I. Pipe 40mm dia. Heavy type 347.00 Rmt
4
17370 49-V-13 G.I. Pipe 50mm dia. Medium type 401.00 Rmt
5
17370 49-V-14 G.I. Pipe 50mm dia. Heavy type 475.00 Rmt
6
17370 49-V-15 G.I. Pipe 65mm dia. Medium type 507.00 Rmt
7
17370 49-V-16 G.I. Pipe 65mm dia. Heavy type 593.00 Rmt
8
Rate In (Rs)
Item Description Rate Unit
17370 49-V-17 G.I. Pipe 80mm dia. Medium type 629.00 Rmt
9
17371 49-V-18 G.I. Pipe 80mm dia. Heavy type 800.00 Rmt
0
17371 49-V-19 PVC Nahani Trap 75 mm 115.00 Per No
1
17371 49-V-20 G.I.Clamps 100mm to 150mm 22.00 Per No
2
17371 49-V-21 PVC Nahani Trap 150 mm 145.00 Per No
3
17371 49-V-22 G.I.Clamps 12mm to 32mm 25.00 Per No
4
17371 49-V-23 G.I.Clamps 40mm to 80mm 17.00 Per No
5
17371 49-V-24 Anglo Indian W.C. Pan Colour 1,115.00 Per No
6
17371 49-V-25 G.I.Fixtures 90.00 kg
7
17371 49-V-26 P.V.C. Cowl 100 mm 65.00 Per No
8
17371 49-V-27 G.I.Screws 30mm 5.00 Per No
9
17372 49-V-28 G.I.Screws 40mm 6.00 Per No
0
17372 49-V-29 G.I.Union 25mm dia. 94.00 Per No
1
17372 49-V-30 Gully trap cover with frame 563.00 Per No
2
17372 49-V-31 Gun Metal stop tap with crutch wheel 20mm 473.00 Per No
3
17372 49-V-32 Gun metal stop tap with crutch wheel 25mm 755.00 Per No
4
17372 49-V-33 Gun metal stop tap with crutch wheel 15mm 344.00 Per No
5
17372 49-V-34 Gun metal stop tap with crutch wheel 20mm 613.00 Per No
6
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17387 49-V-179 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) 45.00 Rmt
1
17387 49-V-180 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) 65.00 Rmt
2
17387 49-V-181 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) 95.00 Rmt
3
17387 49-V-182 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) 145.00 Rmt
4
17387 49-V-183 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) 227.00 Rmt
5
17387 49-V-184 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) 317.00 Rmt
6
17387 49-V-185 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) 195.00 Rmt
7
17387 49-V-186 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure 220.00 Rmt
8
17387 49-V-187 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) 195.00 Rmt
9
17388 49-V-188 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) 280.00 Rmt
0
17388 49-V-189 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure 195.00 Rmt
1
17388 49-V-190 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure 327.00 Rmt
2
17388 49-V-191 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) 458.00 Rmt
3
17388 49-V-192 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) 610.00 Per No
4
17388 49-V-193 P.V.C.pipe 160mm dia.Soil Pipe 644.00 Rmt
5
17388 49-V-194 P.V.C.pipe 160mm dia. Rain Water Pipe 644.00 Rmt
6
17388 49-V-195 P.V.C.Socket 15mm dia. 7.00 Per No
7
17388 49-V-196 P.V.C.Socket 20mm dia. 9.00 Per No
8
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17397 49-V-285 Male adapter (Brass Threads) for 25mm dia. 268.00 Per No
7
17397 49-V-286 Male adapter (Brass Threads) for 32mm dia. 545.00 Per No
8
17397 49-V-287 Male adapter (Brass Threads) for 40mm dia. 668.00 Per No
9
17398 49-V-288 Male adapter (Brass Threads) for 50mm dia. 1,275.00 Per No
0
17398 49-V-289 Male adapter (Plastic Threads) for 15mm dia. 15.00 Per No
1
17398 49-V-290 Male adapter (Plastic Threads) for 20mm dia. 19.00 Per No
2
17398 49-V-291 Male adapter (Plastic Threads) for 25mm dia. 30.00 Per No
3
17398 49-V-292 Male adapter (Plastic Threads) for 32mm dia. 52.00 Per No
4
17398 49-V-293 Male adapter (Plastic Threads) for 40mm dia. 76.00 Per No
5
17398 49-V-294 Male adapter (Plastic Threads) for 50mm dia. 139.00 Per No
6
17398 49-V-295 Female adapter (Brass Threads) for 15mm dia. 130.00 Per No
7
17398 49-V-296 Female adapter (Brass Threads) for 20mm dia. 175.00 Per No
8
17398 49-V-297 Female adapter (Brass Threads) for 25mm dia. 265.00 Per No
9
17399 49-V-298 Female adapter (Brass Threads) for 32mm dia. 558.00 Per No
0
17399 49-V-299 Female adapter (Brass Threads) for 40mm dia. 616.00 Per No
1
17399 49-V-300 Female adapter (Brass Threads) for 50mm dia. 1,193.00 Per No
2
17399 49-V-301 Female adapter (Plastic Threads) for 15mm dia. 18.00 Per No
3
17399 49-V-302 Female adapter (Plastic Threads) for 20mm dia. 27.00 Per No
4
Rate In (Rs)
Item Description Rate Unit
17399 49-V-303 Female adapter (Plastic Threads) for 25mm dia. 40.00 Per No
5
17399 49-V-304 Union for 15mm dia. 79.00 Per No
6
17399 49-V-305 Union for 20mm dia. 94.00 Per No
7
17399 49-V-306 Union for 25mm dia. 106.00 Per No
8
17399 49-V-307 Union for 32mm dia. 151.00 Per No
9
17400 49-V-308 Union for 40mm dia. 244.00 Per No
0
17400 49-V-309 Union for 50mm dia. 428.00 Per No
1
17400 49-V-310 Cross for 15mm dia. 30.00 Per No
2
17400 49-V-311 Cross for 20mm dia. 59.00 Per No
3
17400 49-V-312 Step over Bend 15mm dia. 59.00 Per No
4
17400 49-V-313 Step over Bend 20mm dia. 94.00 Per No
5
17400 49-V-314 Tee holder for 15mm dia. 28.00 Per No
6
17400 49-V-315 Tee holder for 32mm dia. 85.00 Per No
7
17400 49-V-316 End plug threaded for 15mm dia. 13.00 Per No
8
17400 49-V-317 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg 3,570.00 Per No
9
17401 49-V-318 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg 2,320.00 Per No
0
17401 49-V-319 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg 3,145.00 Per No
1
17401 49-V-320 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg 1,915.00 Per No
2
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17403 49-V-339 White Glaze Earth Sink 0.6 x 0.2 x 0.45 1,660.00 Per No
1
17403 49-V-340 Clamp for G.I.pipe 200mm 38.00 Per No
2
17403 49-V-341 Earopean type glazed W.C.pan 68cm 2,388.00 Per No
3
17403 49-V-342 Earopean white glazed earthen ware closet pan 2,388.00 Per No
4
17403 49-V-343 P.V.C. Nahni Trap 151.00 Rmt
5
17403 49-V-344 P.V.C. Connector. 15 mm dia 63.00 Per No
6
17403 49-V-345 Low level flushing cistern 1,025.00 Per No
7
17403 49-V-346 Upvc sanitary pipes all 20 mm dia. 90.00 Rmt
8
17403 49-V-347 Upvc sanitary pipes all 75 mm dia. 211.00 Rmt
9
17404 49-V-348 Bib cock stop tap brass heavy 15mm 796.00 Per No
0
17404 49-V-349 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or 9,205.00 Per No
1 equivalent make
17404 49-V-350 Upvc sanitary pipes all 63 mm dia. 1,385.00 Rmt
2
17404 49-V-351 W.C.PAN Colour glazed 57.50 CM (Orissa) 1,413.00 Per No
3
17404 49-V-352 Piller cock mixer & Angle cock 763.00 Per No
4
17404 49-V-353 Upvc sanitary pipes all 25 mm dia. 370.00 Rmt
5
17404 49-V-354 Upvc sanitary pipes all 15 mm dia. 180.00 Rmt
6
17404 49-V-355 Cement 275.00 bag
7
17404 49-V-356 Upvc sanitary pipes all 40 mm dia. 610.00 Rmt
8
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17406 49-V-375 PVC Aqua kraft type super bib tap 15 mm 202.00 Per No
7
17406 49-V-376 PVC Aqua kraft type super Two Way bib tap 15 mm 381.00 Per No
8
17406 49-V-377 Super push button type cock / tap with flange 15 mm 215.00 Per No
9
17407 49-V-378 PVC Aqua kraft type super jet spray 15 mm 425.00 Per No
0
17407 49-V-379 PVC Aqua kraft type super right angle stop tap 216.00 Per No
1
17407 49-V-380 PVC Aqua kraft type super Pillar tap 15 mm 313.00 Per No
2
17407 49-V-381 Fixing in CC BK Clamp, Battan 25.00 Per No
3
17407 49-V-382 Wall Mounted European type glazed W.C.pan 6,680.00 Per No
4
17407 49-V-383 Super wall sink type tap with flange 15 mm 602.00 Per No
5
17407 49-V-384 Two Way bib tap with flange 382.00 Per No
6
17407 49-V-385 super jet spray with flange 2 in 1 faucet 1.50 metre long 435.00 Per No
7
49-W Building (Bd-W : Water supply and sanitory fittings)
17407 49-W-1 Chloryphyriphos 256.00 litre
8
17407 49-W-2 Solvent 379.00 litre
9
17408 49-W-3 D.D.V.P. 514.00 litre
0
17408 49-W-4 Malathion 288.00 litre
1
17408 49-W-5 Pine Oil 460.00 litre
2
17408 49-W-6 S.S. Pipe 40 mm dia 150.00 Rmt
3
17408 49-W-7 Mild Steel 35,605.00 MT
4
Bhavan Dept 2021-22 - 2021-2022 - Page 204 of 350 22/04/21 3:36
22/04/2021 - 49
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
4
17408 49-W-8 Barbed Wire 87.00 kg
5
17408 49-W-9 Concentina Coil Wire 169.00 Rmt
6
17408 49-W-10 M.S. Steel 36.00 kg
7
17408 49-W-12 RCC Pole 276.00 Per No
8
17408 49-W-14 Green marble 1,243.00 Sq.m
9
17409 49-W-15 Telephone black granite 2,537.00 Sq.m
0
17409 49-W-16 Karva (for roof and sides 10kg bundle) 25.00 Bundle
1
17409 49-W-17 Tatti 20.00 Sq.m
2
17409 49-W-18 Bamboo 25mm dia. 19.00 Rmt
3
17409 49-W-20 Lightening Conductor 8,835.00 Per No
4
17409 49-W-21 Salt 20.00 kg
5
17409 49-W-22 Copper Tape width 25mm*3mm thick 418.00 kg
6
17409 49-W-23 Aluminium Strips 50 mm x 3 mm 63.00 Rmt
7
17409 49-W-24 Cripped wire 3’ - 0" , 4’ - 0" and 5’ - 0" wide 209.00 Sq.m
8
17409 49-W-25 Welding Electrodes 5.00 Per No
9
17410 49-W-26 Welded Mesh 75 X 75 mm 197.00 Sq.m
0
17410 49-W-27 Welded Mesh 150 X 150 mm 169.00 Sq.m
1
17410 49-W-28 Tarat 36" width (Gunny cloth) 33.00 Rmt
2
Bhavan Dept 2021-22 - 2021-2022 - Page 205 of 350 22/04/21 3:36
22/04/2021 - 49
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
2
17410 49-W-29 Chain link 3’ - 0" , 4’ - 0" and 5’ - 0" wide 191.00 Sq.m
3
17410 49-W-30 Bamboo 50mm dia. 15.00 Rmt
4
17410 49-W-31 Hold Fast for Steel Gate 59.00 Per No
5
17410 49-W-32 Nut Boldts 12 mm dia. /Nails all size 78.00 Per No
6
17410 49-W-33 M.S. Pipe 40 mm dia 140.00 Rmt
7
17410 49-W-34 Welding Rod 383.00 Box
8
17410 49-W-35 PVC hand rail cover 218.00 Rmt
9
17411 49-W-36 Antitermite Liquid 3,463.00 kg
0
17411 49-W-37 Lock for Drawer/Cupboard 126.00 Per No
1
17411 49-W-38 Glycel 279.00 litre
2
17411 49-W-39 Hing 3,075.00 kg
3
17411 49-W-40 Hot lime 5.00 kg
4
17411 49-W-41 Ladder 111.00 Per No
5
17411 49-W-42 Fine tooth chisel 59.00 Per No
6
17411 49-W-43 Saw 33.00 Per No
7
17411 49-W-44 Gloves 11.00 Per No
8
Specification:
17411 50-1 Waterproofing Treatment to existing Terrace by using Polymeric 2,080.00 Sq.m
9 cementitious membrane of approved make & approved by
Engineer in charge by replacing the existing waterproofing
treatment. Break open the existing I.P.S. and brick bat coba of the
terrace slab to expose the bare slab. (If there are cracks on the
bare slab open the crack in V Groove and fill it with P.M.M. and
if there are lots of honeycombs and identified bad patches of
concrete the same should be grouted by grouting procedures).
Clean the entire surface thoroughly and over this prepared
surface, apply three coats of polymeric waterproofing coating
having a breathable non toxic acrylic polymer liquid of approved
make & approved by Engineer in charge, over this waterproofing
treatment, provide and lay brick bat coba of average 112 mm
thickness.
17412 50-2 Waterproofing Treatment to existing Toilet and bathrooms by using 2,080.00 Sq.m
0 Polymeric cementitious membrane of approved make & approved
by Engineer in charge and replacing the existing waterproofing
treatment. Break open the existing I.P.S. and brick bat coba of the
toilet and bathroom areas to expose the bare slab. (If there are
cracks on the bare slab open the crack in V Groove and fill it
with P.M.M. and if there are lots of honeycombs and
identified bad patches of concrete the same should be
grouted by grouting procedures). Clean the entire surface
thoroughly and over this prepared surface, apply three
coats of polymeric waterproofing coating having a
breathable non toxic acrylic polymer liquid of approved make &
approved by Engineer in charge over this waterproofing
treatment, provide and lay brick bat coba of average 112 mm
thickness.
17412 50-6 Providing and applying two coats of protective membrane over the 259.00 Sq.m
1 cured concrete surface like R.C.C. footings, columns, plinth
beams etc. which will be submerged under soil so as to
protect the same. Apply two pack coal tar epoxy system of
Sunepoxy Coaltar of approved make & approved by Engineer in
charge, having solid content ranges from 80-100%, Tack free time
4-6 hrs. Recoat after 16-24 hrs. Mix Part A and Part B of
Sunepoxy Coaltar of approved make & approved by Engineer in
charge in 1:1 ratio with slow speed stirrer and apply the same
on a clean R.C.C. surface by brush. Allow to set for 8-10 hours and
apply the second coat. The rate to include for application at all
levels to various RCC elements to the satisfaction of the EIC etc.
complete.
Bhavan Dept 2021-22 - 2021-2022 - Page 207 of 350 22/04/21 3:36
22/04/2021 - 50
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17412 50-7 Providing & Supplying corrosion inhibiting admixture in concrete to 221.00 kg
2 protect steel bars for all concrete in every part Polyalk CP 293 of
approved make & approved by Engineer in charge migrating,
non-nitrite based corrosion inhibiting admixture shall be
added at a dose of 3 Kilograms per cum of concrete. The
admixture should protect both cathodic and anodic sites and have
been accredited by Indian Roads Congress, recommended for
use by Ministry of Road Transport & Highways and should have a 4
year track record of use in both the Gulf Region and India.
Admixture should have evaluated test reports demonstrating a
corrosion rate of zero coulombs after 9 test cycles as per ASTM
G 109 when tested from a research institution NBA accredited
Grade A and internationally ranked among top 5 research
institutions in the world in Annual Survey conducted by
Georgia Institute of Technology ranking of research institutions.
PH of admixture should be alkaline in nature, specific gravity of
0.99 –1.1, colour : brownish. The contractor must intimate the
engineer in charge prior to addition in concrete for recording. If
the admixture is put in the concrete mix at the batching plant, a
written record of the amount of admixture used shall be supplied
to the engineer. The engineer must ensure that the specified
dosage of admixture is added in the concrete mix. (Material
Cost Analysis only)
50-8 Providing and mixing shrinkage compensating admixture cum
plasticizer –Sunplex 330 gms pouch of approved make &
approved by Engineer in charge, adding per 50Kilogrambag of
cement in sand faced cement plaster to internal/external surfaces
in finished in proper line and level. Add Sunplex in dry machine
mix before addition of gauging water. (Material Cost Analysis
only)
17412 50-9 Providing and applying one pack bonding coat between concrete 57.00 Sq.m
3 members like RCC slabs, columns, beams, chajjas, pardis etc
and cement mortar plaster using Hack Aid Plast of approved
make & approved by Engineer in charge. Clean the concrete
surface thoroughly to remove dust, dirt, grime, deshuttering oils
and rub down to a clean surface. Apply Hack Aid Plast of approved
make & approved by Engineer in charge by spray on the entire
concrete surface. Provide a lean cement - sand dash coat over the
same. Allow the dash coat to set for around 24 hours. Further
plastering as per specifications can continue.
50-1 DOORS AND WINDOWS
50-1-50.11 Providing and fixing factory made door/Window frames of required
colour made with wood Polymer composite (WPC) extuded internal
Bhavan Dept 2021-22 ribbed sections
- 2021-2022 - conformingPageto American
208 of 350Society for testing and 22/04/21 3:36
22/04/2021 - 50 materials (ASTM) in regard with density, tensile strength,
flexural strength, Izod impact, water absorption and screw
withdrawal strength with wall thickness of 5mm (+/1mm) and
with frames having mitred joints at each corner, joined together by
two nos. of 10 x 8 mm & 40 mm long PVC dovetail keys including
hard wood piece support along the full vertical and horizontal
length in rebate portion hole for fixing hinges and fixtures and the
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17414 50-9-50.81-b b)Shutter : Providing of 65mm thick asbestos free composite - 3 8,763.00 Sq.m
9 criteria - fire, heat and smoke check Accoustic Door Shutter with
flame guard of 120 minutes IS3614 part -II comprising of 2x9mm
Calcium Silicate boards, Chemical treated internal timber with
Fire retardant chemicals in pressure impregnation vessels
under 160 PSI pressure as per IS:401and kiln seasoned to
moisture below 15% as per IS:1141 frame work of 100x32 mm
with 32mm thick infill of ceramic fiber (density
128Kilograms/CMT), vermaculite mix faced with 6mm Fire
retardant High Density ply, internally lipped with hardwood
beading, and pasted in Hydraulic Press under 50 tonnes pressure,
spray quoted with 2 coats of In tumescent paint of minimum 200
micron, and with 1 row of Brush- Type Astroflamefi intumescent
strip (imported) of size 10mmx4mm concealed for fire and smoke
sealing in the grooves in the shutter on all edges except bottom,
without any external lipping.
17415 50-9-50.81-c c) Vision Panel: 34,993.00 Sq.m
0 1 HR rated E Class clear high stress fire rated glass is pre
fabricated strategically inside the shutter structure with 10 mm
inside the shutter on all sides with U- glazing. An additional
insulated powdercoated ’Z’ channel of 16 swg MS sheet to be fixed
for reinforcement of the joints. With clear fire resistant glass panes
11mm thick having minimum 120 minutes fire Description
50-9-50.82 Providing of Accoustic Door to effectively control noise
inconference rooms, broadcasting studios, theatres and music
practice rooms. with prior approval of concerned Superitending
Engineer.
17415 50-9-50.82-a a)Door Frame: Providing Frames for Accoustic door shutters with 1,908.00 Rmt
1 double rabbit of 68mm 1st class Malaysian Hardwood Frame
densified and pressure treated with chemicals in vacuum
impregnation vessel under 160 PSI pressure as per IS:401and kiln
seasoned to moisture below 15% as per IS:1141 of section 120 X
70 mm spray quoted with 2 coats of In tumescent paint of
minimum 200 micron, with 1 row of Hafele Accoustic seals
concealed in the groove of the Frame for noise control, etc.
complete as per direction of Engineer in Charge
17415 50-9-50.82-b b)Shutter: Providing of 65mm thick Accoustic Door 13,768.00 Sq.m
2 Shutters with wooden structure comprising of Chemical
treated internal timber with anti termite chemicals in
pressure impregnation vessels under 160 PSI pressure as per
IS:401and kiln seasoned to moisture below 15% as per IS:1141
frame work of 100x 48 mm with 48 mm thick infill of ceramic
vermiculite mix of density 54Kilograms/CMT, 3mm sheet rubber
Bhavan Dept 2021-22 interlayer sheet
- 2021-2022 - on one side Page
for acoustic property, faced with 6mm
215 of 350 22/04/21 3:36
22/04/2021 - 50 High Density Waterproof Ply confirming to IS Code 2201,
internally lipped with hardwood beading, and pasted in
Hydraulic Press under 50 tonnes pressure, spray quoted with 2
coats of PU paint of minimum 200 micron of color of engineer
choice (any Veneer or Lamination will cost extra), without
any external lipping along with double rebatting in shutters &
accoustic seal
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
51-A ACCOUSTIC
17415 51-A-1 Providing & Fixing in position, Acoustical Panelling made from 4,820.00 Sq.m
8 Fabric wrapped Compressed polyester fibre nonwoven 9 mm
panels on, 50 x 50 mm sal-wood frame of 600 x 600 c to c having
wooden supports from wall of required length, in front of 1000
gsm synthetic wool 50 mm thick with chicken mesh on wall
side, including cost of required Cut-Outs, decorative
mouldings / finishing-items / paint & Scaffolding, as per
Architectural & Acoustical Design & Instructions & Complete in all
aspects.including all materials labour,finishing etc complete
17415 51-A-2 Providing & Fixing in position, Acoustical Panelling made from 3,602.00 Sq.m
9 Wood-wool board 20mm on, 50 x 50 mm Sal-wood frame of 600 x
600 c to c having wooden supports from wall of required length, in
front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh
on wall side, including cost of required Cut-Outs, decorative
mouldings / finishing-items / paint & Scaffolding, as per
Architectural & Acoustical Design & Instructions & Complete
in all aspects. including all materials labour,finishing etc complete
17416 51-A-3 Providing & Fixing in position, Acoustical Panelling made from 2,415.00 Sq.m
0 Gypsum plain 12mm panels on, 50 x 50 mm Sal-wood frame of
600 x 600 c to c having wooden supports from wall of required
length, in front of 1000 Gsm synthetic wool 50 mm thick with
chicken mesh on wall side, including cost of required Cut-Outs,
decorative mouldings / finishing-items / paint & Scaffolding, as
per Architectural & Acoustical Design & Instructions &
Complete in all aspects. including all materials labour,finishing
etc complete
17416 51-A-4 Providing & Fixing in position, Acoustical Panelling made from 5,345.00 Sq.m
1 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm
Sal-wood frame of 600 x 600 c to c having wooden supports
from wall of required length, in front of 1000 Gsm synthetic wool
50 mm thick with chicken mesh on wall side, including cost of
required Cut-Outs, decorative mouldings / finishing-items /
paint & Scaffolding, as per Architectural & Acoustical
Design & Instructions & Complete in all aspects.including all
materials labour,finishing etc complete
17416 51-A-5 Providing & Fixing in position Acoustical Doors along with 150 x 24,885.00 Sq.m
2 150 mm teak wood frame, doors made from 50mm Teak wood
frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm
thick and 3mm Tecsound from both sides, 12mm waterproof ply &
veneer from both sides , including 150mm heavy duty SS hinges
Bhavan Dept 2021-22 (Geze / Dorma
- 2021-2022 - or eq.) Page
4 no219 of 350
each leaf, with Door-closer 22/04/21 3:36
22/04/2021 - 51 (Dorma / Geze or eq.) including cost of required Cut-Outs,
decorative mouldings / finishing-items / melamine polish &
Scaffolding as per Architectural & Acoustical Design &
Instructions & Complete in all aspects .including all
materials labour,finishing etc complete
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17417 51-A-18 Providing & fixing in position, heavy duty fully upholstered 6,300.00 Per No
5 Auditorium chairs 520 mm c to c tip-up type. Height of back
should be less than 1030 mm with plastic protective cover on back
and bottom having teak wood handles. Back to back distance
is 1000mm. The auditorium chairs should be of following
specifications 1. Powder Coated Heavy duty MS Stand. 2.
Individually moulded , ergonomically designed seat and
back cushions. 3.Moulded Polyurethane Foam cushion. PU
foam density 48 –52 Kilograms/cu.mtr 4. Moulded
Polyurethane Foam manufactured in certified ISO 9001 facility
to ensure consistency in density for longevity .5.Upholstered
in Foam laminated stretch sandwich Fabric for clean finish and
soft comfortable feel as per the colour & pattern selected by the
client. 6.Seat and Back should have moulded synthetic
protective cover. 7. Wooden or PU armrest 65mm x 20mm -
330mm long . 8.Mounted using Anchor fasteners.
17417 51-A-19 Providing and Fixing Rollar Blinds AMI Make or approved make & 2,260.00 Sq.m
6 shade of 38mm round Aluminium channel with Blackout fabric
& telting with chain (Ball) system with all necessary fixtures
and fitting etc. complete. (Sample to be final by Engineer
In-charge prior execution of work)
17417 51-A-20 Providing and Fixing Vertical Blinds of approved Make and shade of 1,076.00 Sq.m
7 100mm regular fabric with powder coated aluminium channel with
telting PVC chain & bottom weight plate with all necessary
fixtures and fitting etc. complete. (Sample to be final by
Engineer In-charge prior execution of work)
51-B FURNITURE
17417 51-B-21 Executive’s Table @ 1800Lx900Dx750HT 18,093.00 Per No
8 Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE
END to be made of Membrane finish with soft water fall edges &
curved panel & Decorated Anodized section MODESTY PANEL to
be made of 18 mm thick Prelaminated particle board with PVC
edge band as per drawing
17417 51-B-22 Pedestal Unit @ 420Lx450Dx650HT 9,454.00 Per No
9 Providing & Fixing of PEDESTAL @ 420Lx450Dx650HT :- To be
made out of Complete Membrane consist of three Drawers as per
drawing.
17418 51-B-23 Credestal @ 1200Lx450Lx650HT 18,373.00 Per No
0 Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X
650H :- To be made out of Membrane Finish ( 2 Openable Shutter
& 3 Drawer Pedestal in between )as per drawing.
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
having overall size 392L x 450D x 680Ht. mm. with central lock
and key. 3 Drawers and body are complete metal with
powder coat finish, facia in 18 mm prelaminated particle board,
17418 51-B-31 Conference Table @ 3600Lx1400Dx750HT 1,04,060.00 Per No
8 Providing & Fixing of Main Table @ 3600Lx1400Dx750HT - made
up of 18+18mm Thick MDF top with PVC Membrane finish and
waterfall edge profile. Aluminium Anodizied finish beeding of 4mm
thich is running all over the table top edge. Gable ends is
Aerofoiled Shape with front edges in PVC Membrane finish and
rest in Prelaminated MDF with batton structure. Gable ends
should be hollow from inside for the provision of passing electrical
and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick
Prelaminated particle board with PVC edge band
Access Flap:- For Wire manager 2 Nos.
17418 51-B-32 Conference Table @ 1800 x 900 x 750 mm Ht. 22,163.00 Per No
9 Providing & Fixing of Main Table @ 1800Lx900Dx750HT - made up
of 18+18mm Thick MDF top with PVC Membrane finish and
waterfall edge profile. Aluminium Anodizied finish beeding of 4mm
thich is running all over the table top edge. Gable ends is
Aerofoiled Shape with front edges in PVC Membrane finish and
rest in Prelaminated MDF with batton structure. Gable ends
should be hollow from inside for the provision of passing electrical
and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick
Prelaminated particle board with PVC edge band
Access Flap:- For Wire manager 1 Nos.
17419 51-B-33 12 Seater Reading Table for Library @ 3600Lx1200Dx750HT 31,013.00 Per No
0 Providing and Fixing 12 Seater Reading Table for Liberary @
3600Lx1200Dx750HT Top: made from 25 mm Prelaminated
Particle board. All edges are covered by 2 mm. Thk. PVC edge
bands glued by hot melt glue applied by auto edge banding
machine.
Gable Ends : made from 25 mm Prelaminated Particle board. All
edges are covered by 2 mm. Thk. PVC edge bands glued by hot
melt glue applied by auto edge banding machine. Modesty panel :
Made from 18mm both side prelaminated particle boards.All
edges are covered by 0.8mm PVC edge bands glued by hot melt
glue applied by auto edge banding machine.
17419 51-B-34 3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm. 8,513.00 Per No
1 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x
680Ht. mm. with central lock and key. 3 Drawers and body are
complete metal with powder coat finish, facia in 18 mm
prelaminated particle board.
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17419 51-B-42 Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , 10,041.00 Per No
9 Fixed Armrest , Gaslift for Seat height adjustment, Standard
5-prong/Nylon Base with Leather Upholstery
17420 51-B-43 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed 6,846.00 Per No
0 Armrest , Gaslift for Seat height adjustment, Standard 5-prong
P/Nylon Base with Fabric Upholstery
17420 51-B-44 Public Seating Chair. - 3 Seater 18,959.00 Per No
1 Providing and Fixing 3 seater Public seating chair made of
complete metal with Legs in Crome finish and seates in silver
powder coating finish.
17420 51-B-45 Double Faced Mobile Unit for Compactor 2150mmH x 2745mmW x 1,42,598.00 Per No
2 900mmD
Providing and fixing Double Faced Mobile Unit for Compactor
2150mmH x 2745mmW x 900mmD - BASE FRAME : Base Frame
shall be fabricated in channel Type from minimum
2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm.
GUIDE RAILS : The guide rails shall be made out of 28mm Bright
bar placed on 1.2 mm thick M.S. Plate which will be above the
floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system
will consist of knock down type panels. All the components such
as shelves, front panel, end panel, vertical rear panel, central
partition etc. Will act as an integral member of the Unit. SHELVES :
Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10
folds each will be provided each designed to carry a U.D.L. of 70
Kilograms. VERTICAL PANEL : Vertical panel consists of the front,
Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of
shelves.
DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime
quality Steel to cover the entire drive mechanism. CENTRE
PARTITION : The Centre partition will comprise of a full C.R.C.A.
prime quality Mild Steel 22SWG Sheet. LOCKING : System will be
provided with individual rack locking as well as centralised locking
arrangement on the last unit when all units are brought together,
central lock when operated gets locked with the floor & does not
allow access to the units. DRIVE MECHANISM : Driving
Mechanism will be provided externally supported on special
grade anti-friction bearing to have smooth & effortless
movement. Entire mechanism or gear & sprockets shall be
incorporated within the front panel provided in the front of the unit
within an area of 1000mm x 200mm x 60mm. DRIVING WHEEL :
Fully Powder Coated three pronged drive wheel for better torque &
free movement of the rack over the guide rail. INDEXING
Bhavan Dept 2021-22 - 2021-2022 - Page 227 of 350 22/04/21 3:36
ARRANGEMENT : Acrylic card holders provided on the front
22/04/2021 - 51
panel for easy identification & retrieval. FINAL FINISH :
Powder Coating (8 tanks process with 70 microns).
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
will consist of knock down type panels. All the components such
as shelves, front panel, end panel, vertical rear panel, central
partition etc. Will act as an integral member of the Unit. SHELVES :
Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10
folds each will be provided each designed to carry a U.D.L. of 70
Kilograms. VERTICAL PANEL : Vertical panel consists of the front,
Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of
shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C.
A. prime quality Steel to cover the entire drive mechanism.
CENTRE PARTITION : The Centre partition will comprise of a full
C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING :
System will be provided with individual rack locking as well as
centralised locking arrangement on the last unit when all units are
brought together, central lock when operated gets locked with the
floor & does not allow access to the units. DRIVE MECHANISM :
Driving Mechanism will be provided externally supported on
special grade anti-friction bearing to have smooth &
effortless movement. Entire mechanism or gear & sprockets shall
be incorporated within the front panel provided in the front of the
unit within an area of 1000mm x 200mm x 60mm. DRIVING
WHEEL : Fully Powder Coated three pronged drive wheel for better
torque & free movement of the rack over the guide rail.
INDEXING ARRANGEMENT : Acrylic card holders provided on
the front panel for easy identification & retrieval. FINAL
FINISH : Powder Coating (8 tanks process with 70 microns).
17420 51-B-49 Single Faced Mobile Unit for Compactor 2150mmH x 1830mmW x 73,395.00 Per No
6 457mmD
Providing and fixing Single Faced Mobile Unit for Compactor
2150mmH x 1830mmW x 457mmD - BASE FRAME : Base
Frame shall be fabricated in channel Type from minimum
2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm.
GUIDE RAILS : The guide rails shall be made out of 28mm Bright
bar placed on 1.2 mm thick M.S. Plate which will be above the
floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system
will consist of knock down type panels. All the components such
as shelves, front panel, end panel, vertical rear panel, central
partition etc. Will act as an integral member of the Unit. SHELVES :
Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10
folds each will be provided each designed to carry a U.D.L. of 70
Kilograms. VERTICAL PANEL : Vertical panel consists of the front,
Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of
shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C.
Bhavan Dept 2021-22 A. prime quality
- 2021-2022 - Steel to Page
cover
230the entire drive mechanism.
of 350 22/04/21 3:36
22/04/2021 - 51 CENTRE PARTITION : The Centre partition will comprise of a
full C.R.C.A. prime quality Mild Steel 22SWG Sheet.
LOCKING : System will be provided with individual rack
locking as well as centralised locking arrangement on the last
unit when all units are brought together, central lock when
operated gets locked with the floor & does not allow
access to the units. DRIVE MECHANISM : Driving Mechanism
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
floor & does not allow access to the units. DRIVE MECHANISM :
Driving Mechanism will be provided externally supported on
special grade anti-friction bearing to have smooth &
effortless movement. Entire mechanism or gear & sprockets shall
be incorporated within the front panel provided in the front of the
unit within an area of 1000mm x 200mm x 60mm. DRIVING
WHEEL : Fully Powder Coated three pronged drive wheel for better
torque & free movement of the rack over the guide rail. INDEXING
ARRANGEMENT : Acrylic card holders provided on the front panel
for easy identification & retrieval. FINAL FINISH : Powder Coating
(8 tanks process with 70 microns).
17420 51-B-51 Stool for Lab and Class-IV 2,748.00 Per No
8 Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45
MM Outer dimension MS Pipe, Duly painted, With a 304 Grade
Stainless steel 12 inch wide seat with a 1 inch collar, Height
adjustment via a screw. as per design and drawing and
instructions of Engineer in charge.
17420 51-B-52 Alluminium foldable ladder for store 4,159.00 Per No
9 Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht.
17421 51-B-53 Sofa Set 3+1+1 41,593.00 Per No
0 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather
DIMENSION Length: 182.5 (cms) Breadth (cms): 100
(cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram)
Seating Capacity: Five Seat
17421 51-B-54 Tea Table 900mm X 750mm X 450mm for m.s. ante chamber 11,679.00 Per No
1 Providing And Fixing Of Tea Table 900mm X 750mm X 450mm
With 12mm Thick Colour Eitched Tempered Glass With Bevelled
Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer
Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm
Thik Mica Etc.
17421 51-B-55 Single Bed @ 2025LX 1000DX 650H 20,335.00 Per No
2 Providing and fixing Single Bed of Size 2025Lx1000Dx650H with
matress and pillow.
Understructure: - The legs are made of Square tube of size 25 x
25mm made out of MS with a thickness of 1.2 mm. The legs
should have corner brackets welded to it at two levels. The
corner brackets are made of 2mm thick CRCA having a L shaped
structure to join the side panels and headboard to the leg. Three
nos. of Horizontal stiffeners are provided at equal intervals. The
stiffeners are made of Square tube of size 25 x 25mm made out of
MS with a thickness of 1.2mm. The middle Horizontal Stiffener has
a leg attached to it to transfer the load to the ground and add to
the strength and stability of the complete structure. This leg is also
Bhavan Dept 2021-22 made
- 2021-2022 - tube of sizePage
of Square 25 x232 of 350
25mm made out of MS with a 22/04/21 3:36
22/04/2021 - 51 thickness of 1.2mm. All Metal components to undergo 7 tank
treatment process and should be powder coated to the thickness
of minimum 50 Microns DFT.
Side Panel: - The side panels are made up of 18mm thick Prelam
Particle Board with both side decorative laminate. All exposed
edges are sealed with 2mm thick PVC edge Banding. The overall
width of the side panel is 150mm. The side panels have
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
the strength and stability of the complete structure. This leg is also
made of Square tube of size 25 x 25mm made out of MS with a
thickness of 1.2mm. All Metal components to undergo 7 tank
treatment process and should be powder coated to the thickness
of minimum 50 Microns DFT.
Side Panel: - The side panels are made up of 18mm thick Prelam
Particle Board with both side decorative laminate. All exposed
edges are sealed with 2mm thick PVC edge Banding. The overall
width of the side panel is 150mm. The side panels have
18mm thick prelam particle board Baton running for required
length to add rigidity to the structure.
Head Board :- The head board is made up of 18mm thick Prelam
Particle Board with both side decorative laminate. All exposed
edges are sealed with 2mm thick PVC edge Banding. The head
board size to be considered as 1000 x 650mm.
Foot Board :- The foot board is made up of 18mm thick Prelam
Particle Board with both side decorative laminate. All exposed
edges are sealed with 2mm thick PVC edge Banding. The head
board size to be considered as 1000 x 450mm.
Bed Base: - The Bed Base is made up of 12mm thick Prelam
Particle Board with both side White laminate.
17421 51-B-56 Dressing Table @400LX 400DX 1800H 18,220.00 Per No
3 Providing & Fixing Dressing Table of size 400LX 400DX 1800H.The
Dressing table unit is made up of 18mm thick Prelam Particle
Board with both side decorative laminate. All exposed edges
are sealed with 2mm thick PVC edge Banding. The unit has one
drawer and one shelf. The dressing table has a mirror of 4mm
thick pasted on 18mm thick prelm particle board attached to the
base unit. The mirror size considered is 1155 x 360 x 4(t). The
mirror has been pasted using high quality 3M sticker.
17421 51-B-57 Wardrobe with Mirror @ 900LX 600DX 1965H 42,408.00 Per No
4 Providing and Fixing Wardrobe with Mirror of size 900LX 600DX
1965H The wardrobe side panels and doors are made up of
18mm thick Prelam Particle Board with both side decorative
laminate. All exposed edges are sealed with 2mm thick PVC edge
Banding. The shelves are made of 18mm thick Prelam Particle
Board with decorative laminate on both sides. The top is made
of 36mm prelam particle board with decorative laminate on both
sides. (18mm Prelam Particle board and 18mm batons on all
sides to achieve 36mm overall thickness). The exposed edges of
the top are sealed with 2mm thick PVC edge Banding. The top
most part of the wardrobe has an aluminum hanger rod of EBCO
make. One drawer of size 400(W) x 150(H) x 450 (D) made
of 18mm thick prelam Particle Board has been considered.
The drawer will have a multipurpose lock of EBCO premium
Bhavan Dept 2021-22 - 2021-2022 - Page 233 of 350 22/04/21 3:36
make. The wardrobe handles are Satin SS finish of 160mm pitch.
22/04/2021 - 51
The wardrobe has a multipurpose lock of EBCO make. All hinges
considered are Hettich make. Necessary good quality hardwares
have been considered as required.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17424 51-E-92 Providing & fixing factory-made steel door of Single leaf External 6,384.00 Sq.m
9 Plain Wood finish type with a.) frame of size 100x58 mm
conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized
sheet with mitred and welded cones , frame stretches, hinge
reinforcing plates , fixing plates and hardware mounting plates
and Polyurethane foam infill b.) Shutter of thickness 46mm
made of 0.8 mm thick slip coated pre galvanized steel sheet on
both sides conforming to ASTM A527/ASTM A525, BS 2989 1994,
IS 277 , Zinc coating 120 GSM . Lock formed panels with internal
stiffeners of 3mm thick made of galvanized sheet, 3 mm thick
hinge reinforcing hardware mounting plates and lock protection
with Honey-comb craft paper infill of thickness 150 GSM of load
bearing capacity 500 Kilogram/Square Metre. c.) Finish: Powder
coated surface finished with thermosetting polyurethane paint
of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8
Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges
of Dorset make, Dorset Mortise lock, SS Tower bolt of 200 mm
size, Eye hole, Door stopper complete.
Sizes up to 1200 x2439 mm
17425 51-E-93 Providing & fixing factory-made steel door of Single leaf External 6,080.00 Sq.m
0 Plain Wood finish type with a.) frame of size 100x58 mm
conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized
sheet with mitred and welded cones , frame stretches, hinge
reinforcing plates , fixing plates and hardware mounting plates
and Polyurethane foam infill b.) Shutter of thickness 46mm
made of 0.8 mm thick slip coated pre galvanized steel sheet on
both sides conforming to ASTM A527/ASTM A525, BS 2989 1994,
IS 277 , Zinc coating 120 GSM . Lock formed panels with internal
stiffeners of 3mm thick made of galvanized sheet, 3 mm thick
hinge reinforcing hardware mounting plates and lock protection
with Honey-comb craft paper infill of thickness 150 GSM of load
bearing capacity 500 Kilogram/Square Metre. c.) Finish: Powder
coated surface finished with thermosetting polyurethane paint
of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8
Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges
of Dorset make, Dorset Mortise lock, SS Tower bolt of 200 mm
size, Eye hole, Door stopper complete.
Sizes up to 1200 x2439 mm
17425 51-E-94 Providing & fixing factory-made steel door of Single leaf 5,784.00 Sq.m
1 Internal Plain Wood finish type with a.) frame of size 100x58
mm conforming to IS : 4351-2003 , 1.2 mm thick pre
galvanized sheet with mitred and welded cones , frame
stretches, hinge reinforcing plates , fixing plates and hardware
mounting plates and Polyurethane foam infill b.) Shutter of
Bhavan Dept 2021-22 thickness 46mm
- 2021-2022 - made of 0.8 mm241
Page thick
of slip
350coated pre galvanized 22/04/21 3:36
22/04/2021 - 51 steel sheet on both sides conforming to ASTM A527/ASTM A525,
BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock formed
panels with internal stiffeners of 3mm thick made of galvanized
sheet, 3 mm thick hinge reinforcing hardware mounting plates
and lock protection with Honey-comb craft paper infill of thickness
150 GSM of load bearing capacity 500 Kilogram/Square Metre. c.)
Finish: Powder coated surface finished with thermosetting
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17426 51-F-105 Providing internal cement plaster 20mm thick in a single coat 472.00 Sq.m
2 using Ready to use wall plaster in cement mortar 1:3 to stone
masonry surfaces in all positions including scaffolding and
curing. Providing groove at joint of stone masonry and concrete
members complete.
With Prior Approval of Concerned S.E.
17426 51-F-106 Providing internal cement plaster 12 mm thick in a single coat 230.00 Sq.m
3 using Ready to use wall plaster to concrete or brick surface in
all positions including scaffolding and curing complete.
Providing groove at joint of B.B. Masonry and concrete members
complete.
a) cement ratio 1:5 With Prior Approval of Concerned S.E.
17426 51-F-107 Providing internal cement plaster 12 mm thick in a single coat 243.00 Sq.m
4 using Ready to use wall plaster to concrete or brick surface in
all positions including scaffolding and curing complete.
Providing groove at joint of B.B. Masonry and concrete members
complete.
b) cement ratio 1:4 With Prior Approval of Concerned S.E.
17426 51-F-108 Providing internal cement plaster 12 mm thick in a single coat 246.00 Sq.m
5 using Ready to use wall plaster to concrete or brick surface in
all positions including scaffolding and curing complete.
Providing groove at joint of B.B. Masonry and concrete members
complete.
c) cement ratio 1:3 With Prior Approval of Concerned S.E.
17426 51-F-109 Providing internal cement plaster 6 mm thick in a single coat using 188.00 Sq.m
6 Ready to use wall plaster in cement mortar 1:3 to concrete
surface in all positions including scaffolding and curing.
Providing groove at joint of B.B.Masonry and concrete members
complete.
With Prior Approval of Concerned S.E.
51-G BRICK MASNORY
17426 51-G-110 Providing Autoclaved areated concrete block masonry of approved 6,359.00 Cu.M
7 manufacture confirming to IS 2185 Part III 1984 of size 600 mm x
200mm and thickness 100,150, 200 or 250 mm using Ready to
use BLOCK JOINT MORTAR1:6 in foundations and plinth of
inner walls / external walls including bailing out water,
striking joints on unexposed faces, racking out joints on
exposed faces and watering complete..
With Prior Approval of Concerned S.E.
17426 51-G-111 Providing and fixing 50mm diameter and 1.5 mm thick Stainless 3,413.00 Rmt
8 steel hand railing in S.S.304 Grade including
fabricating ,fixtures, errecting, necessary
Page 245 of 350 welding, grinding, 22/04/21 3:36
Bhavan Dept 2021-22 - 2021-2022 -
finishing, buffing to stainless steel pipe etc. complete
22/04/2021 - 51
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17428 51-H-117 Providing internal / external 12 mm thick Ready Mix plaster 225.00 Sq.m
3 confirming to IS:4031(Part-4) 1988 and IS 383-1970 in a
single coat using Cement mortar of proportion 1:4 containing
special type of polymer additives about 0.4%, to all type of
surfaces in all positions including scaffolding and curing complete.
17428 51-H-118 Providing internal / external 20 mm thick Ready Mix plaster 397.00 Sq.m
4 confirming to IS:4031(Part-4) 1988 and IS 383-1970 in a
single coat using Cement mortar of proportion 1:4 containing
special type of polymer additives about 0.4%, to all type of
surfaces in all positions including scaffolding and curing complete
17428 51-H-119 Providing brick masonry with interlock "Fourlock" bricks in 1,337.00 Sq.m
5 retaining walls ,diaphragm wall
,compound wall ,plinth & partition wall etc of specified 150 mm
thick including construction with interlock "Fourlock" brick, filling
the hollow spaces with cementious grout material of proportion of
C:M 1:6 using trap stone grit metal/artificial sand dusting off the
finished brick masonry"Fourlock" bricks, surface,watering &
curing etc complete. ( Including steel reinforcement of
8mm bar as strengthening bar in hollow spaces of fourlock
bricks with cementious greet material )
51-I BRICK MASNORY
17428 51-I-120 Providing brick masonry with interlock "Fourlock" bricks in 1,154.00 Sq.m
6 plinth & superstructure of specified 150 mm thick including
construction with interlock "Fourlock" bricks,filling the hollow
spaces with cementious grout material of proportion of C:M 1:6
using trap stone grit metal/artificial sand including dusting off
the finished brick masonry surface,watering & curing etc
complete. ( Excluding steel reinforecement for strengthening )
17428 51-I-121 Providing brick masonry with interlock "Fourlock" bricks in 1,139.00 Sq.m
7 retaining walls ,diaphragm wall
,compound wall ,plinth & partition wall etc of specified 100 mm
thick including construction with interlock "Fourlock" brick, filling
the hollow spaces with cementious grout material of proportion of
C:M 1:6 using trap stone grit metal/artificial sand dusting off the
finished brick masonry"Fourlock" bricks, surface,watering &
curing etc complete. ( Including steel reinforcement of
8mm bar as strengthening bar in hollow spaces of fourlock
bricks with cementious greet material )
17428 51-I-122 Providing brick masonry with interlock "Fourlock" bricks in 948.00 Sq.m
8 plinth & superstructure of specified 100 mm thick including
construction with interlock "Fourlock" bricks,filling the hollow
spaces with cementious grout material of proportion of C:M 1:6
Bhavan Dept 2021-22 using
- 2021-2022 -
trap stone Page 249 sand
grit metal/artificial of 350including dusting off 22/04/21 3:36
22/04/2021 - 51 the finished brick masonry surface,watering & curing etc
complete. ( Excluding steel reinforecement for strengthening )
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
5. Diameter: 50 mm
5. Height: 18 mm
6. Surface Area: 6751 sq mm
It shall be applied as per manufacturers specification.
(If scaffolding is required, same shall be provided and will be paid
under relevant item)
17430 52-26 Make the surface clean of loose particles, dirt, dust, oils, 162.00 Sq.m
7 and paints etc. by wire brush. Remove all laitance from
surface. On the entire clean surface, apply a coat of Ter polymer of
enoates of 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate
(MPBP) and propenonitrile as approved by Engineer in charge and
cement (1:0.25) by spray or ordinary cement brush. Fill up all
bug holes with above slurry. Apply slurry generously on
entire surface without pinholes. Similar treatment to be given to
other block surface immediately. Place coated area of one block
over coated area of another block immediately after
application. Polymeric bonding agent to be used for AAC
Block to AAC Block & CC Brick Block to CC Brick Block should
have following minimum properties:
1. Base: Polymeric Emulsion
2. Specific Gravity: 1.03 – 0.02
3. pH Value: 7.5 - 8
,WVKDOOEHDSSOLH
G D V S H
(If scaffolding is required, same shall be provided and will be paid
under relevant item)
17430 52-27 It is ready to use inorganic, bio compatible, low viscosity, non 589.00 kg
8 hazardous, soil stabilizing two component colloidal silica base
chemical grout. Providing and carrying out this grouting to
stabilize the strata above the tunnel, foundations, cutting slope
stabilization and sub structures by using ultimate fine Nano grout
as approved by Engineer in charge. Drill injecting holes to required
depth in loose soil strata. Fix the grouting pipes. Grout must be
continuously stirred during addition of accelerator and fully mixed
to transparent solution prior to grouting into the soil/strata. No
white precipitates should remain in the grout mix. This is
ultimate fine grouting can be completed by Nano grout.
Solvent Free, Inorganic, Hydrophilic, Non- hazardous, Low
Viscosity Chemical Grout for Stabilization and Consolidation of
Sandy/Silty Soil should have following minimum properties:
Grout: (Rate for fixing nozzle is not included in this item).
1) Specific Gravity: 1.2 – 0.1 2) pH: 11.3 – 0.1 3) Viscosity in
B4 Ford cup at 28 C: 12- 15 sec
Accelerator:
1) Specific Gravity: 1.07 – 0.01 2) pH: 7.0 – 0.1 3) Viscosity in
Bhavan Dept 2021-22 - 2021-2022 - Page 262 of 350 22/04/21 3:36
B4 Ford cup at 28 C: 10-12 sec
22/04/2021 - 52
Sungeogrout Mix:
1) Specific Gravity: 1.2 – 0.1 2) Viscosity in B4 Ford cup at 28 C:
12-15 sec
,WVKDOOEHDSSOLH
G D V S H
(If scaffolding is required, same shall be provided and will be paid
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17431 53-1 Supplying, Drilling/Cleaning hole and injecting Hilti make ETA 256.00 Per No
9 Approved RE500V3 chemical. Application to be designed
separately for Rebars as Simply Supported, Moment or Splice
Connection as per EC2/TR 023 or relevant tested and accepted
rebar guidelines. The chemical should have ETA approval for
seismic rebar as a minimum qualifying criterion. Drilling hole
with double flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill, cleaning with brush and
jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery
dispenser along with piston plug. The installation and the setting
instructions should be strictly followed as per the P D Q X
rIecoDmmFendWatioXns. UTheHadeUqua¶te Vdiameter and
embedment of rebars to be decided as per PROFIS Rebar
Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to
be done to avoid hitting existing rebars. Re 500 -8mm dia 160mm
depth
17432 53-2 Supplying, Drilling/Cleaning hole and injecting Hilti make ETA 458.00 Per No
0 Approved RE500V3 chemical. Application to be designed
separately for Rebars as Simply Supported, Moment or Splice
Connection as per EC2/TR 023 or relevant tested and accepted
rebar guidelines. The chemical should have ETA approval for
seismic rebar as a minimum qualifying criterion. Drilling hole
with double flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill, cleaning with brush and
jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery
dispenser along with piston plug. The installation and the setting
instructions should be strictly followed as per the P D Q X
rIecoDmmFendWatioXns. UTheHadeUqua¶te Vdiameter and
embedment of rebars to be decided as per PROFIS Rebar
Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to
be done to avoid hitting existing rebars. Re 500 -10 mm dia
200mm depth
17432 53-3 Supplying, Drilling/Cleaning hole and injecting Hilti make ETA 569.00 Per No
1 Approved RE500V3 chemical. Application to be designed
separately for Rebars as Simply Supported, Moment or Splice
Connection as per EC2/TR 023 or relevant tested and accepted
rebar guidelines. The chemical should have ETA approval for
seismic rebar as a minimum qualifying criterion. Drilling hole
with double flute type drill bits or hollow drill bits to the
Bhavan Dept 2021-22 required
- 2021-2022 - by rotary hammerPage 268 of 350 22/04/21 3:36
depth drill, cleaning with brush and
22/04/2021 - 53 jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery
dispenser along with piston plug. The installation and the setting
instructions should be strictly followed as per the P D Q X
rIecoDmmFendWatioXns. UTheHadeUqua¶te Vdiameter and
embedment of rebars to be decided as per PROFIS Rebar
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
with double flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill, cleaning with brush and
jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery
dispenser along with piston plug. The installation and the setting
instructions should be strictly followed as per the P D Q X
rIecoDmmFendWatioXns. UTheHadeUqua¶te Vdiameter and
embedment of rebars to be decided as per PROFIS Rebar
Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to
be done to avoid hitting existing rebars. Re 500 -12 mm dia
240mm depth
17432 53-4 Supplying, Drilling/Cleaning hole and injecting Hilti make ETA 831.00 Per No
2 Approved RE500V3 chemical. Application to be designed
separately for Rebars as Simply Supported, Moment or Splice
Connection as per EC2/TR 023 or relevant tested and accepted
rebar guidelines. The chemical should have ETA approval for
seismic rebar as a minimum qualifying criterion. Drilling hole
with double flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill, cleaning with brush and
jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery
dispenser along with piston plug. The installation and the setting
instructions should be strictly followed as per the P D Q X
rIecoDmmFendWatioXns. UTheHadeUqua¶te Vdiameter and
embedment of rebars to be decided as per PROFIS Rebar
Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to
be done to avoid hitting existing rebars. Re 500 -16 mm dia
320mm depth
17432 53-5 Supplying, Drilling/Cleaning hole and injecting Hilti make ETA 1,238.00 Per No
3 Approved RE500V3 chemical. Application to be designed
separately for Rebars as Simply Supported, Moment or Splice
Connection as per EC2/TR 023 or relevant tested and accepted
rebar guidelines. The chemical should have ETA approval for
seismic rebar as a minimum qualifying criterion. Drilling hole
with double flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill, cleaning with brush and
jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery
dispenser along with piston plug. The installation and the setting
instructions should be strictly followed as per the P D Q X
rIecoDmmFendWatioXns. UTheHadeUqua¶te Vdiameter and
embedment of rebars to be decided as per PROFIS Rebar
Software & the report to be submitted to the project
Bhavan Dept 2021-22 - 2021-2022 - Page 269 of 350 22/04/21 3:36
manager/ design engineer for approval. Scanning before drilling to
22/04/2021 - 53
be done to avoid hitting existing rebars. Re 500 -20 mm
dia400mm depth
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17433 53-13 Supplying, Drilling/Cleaning hole and injecting Hilti make ETA 2,352.00 Per No
1 Approved HY-200-R chemical. Application to be designed
separately for Rebars as Simply Supported, Moment or Splice
Connection as per EC2/TR 023 or relevant tested and accepted
rebar guidelines. The chemical should have ETA approval for
seismic rebar as a minimum qualifying criterion. Drilling hole
with double flute type drill bits or hollow drill bits to the
required depth by rotary hammer drill, cleaning with brush and
jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery
dispenser along with piston plug. The installation and the setting
instructions should be strictly followed as per the P D Q X
rIecoDmmFendWatioXns. UTheHadeUqua¶te Vdiameter and
embedment of rebars to be decided as per PROFIS Rebar
Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to
be done to avoid hitting existing rebars. HY 200 -25mm dia
500mm depth
17433 53-14 Providing and supplying HIT-RE500V3 with HIT-V Threaded Rod. 220.00 Per No
2 The product should be approved by ETA, ICC, CSTB, COLA,
BZS with Shock approval, Seismic (C1 & C2) approval, Fatigue
and Fire Approvals in anchors to use in cracked concrete, tested
for service temperature of -40 deg. C to +80 deg. C. The chemical
should have an ETA approval for 100 years age testing. Anchoring
with HIT-V with RE500V3 to be designed as per guidelines of TR
029. Drilling hole with double flute type drill bits/ hollow drill bits
to the required depth by rotary hammer drill, cleaning with
brush and jet of clean air, filling resin and hardener using
serrated nozzle to eliminate mixing error with standard HDE
A22 battery dispenser along with piston plug. The installation and
the setting instructions should be strictly followed as per the P
D Q X rIecoDmmFendWatioXns.
UTheHadUequ¶ateVembedment depth & number of anchors to
be calculated as per PROFIS Anchor Software & the report to be
submitted to the project manager, design engineer for approval.
Scanning before drilling to be done to avoid hitting existing
rebars. For zones with high seismicity, seismic designs are
mandatory. For shear loads, base plate designed by SOFA, filling
sets are mandatory. Anchor RE500V3 + HIT M10 x 125mm
17433 53-15 Providing and supplying HIT-RE500V3 with HIT-V Threaded Rod. 293.00 Per No
3 The product should be approved by ETA, ICC, CSTB, COLA,
BZS with Shock approval, Seismic (C1 & C2) approval, Fatigue
and Fire Approvals in anchors to use in cracked concrete, tested
for service temperature of -40 deg. C to +80 deg. C. The chemical
Bhavan Dept 2021-22 should have an
- 2021-2022 - ETA approval for 100
Page 273 years
of 350age testing. Anchoring 22/04/21 3:36
22/04/2021 - 53 with HIT-V with RE500V3 to be designed as per guidelines of TR
029. Drilling hole with double flute type drill bits/ hollow drill bits
to the required depth by rotary hammer drill, cleaning with
brush and jet of clean air, filling resin and hardener using
serrated nozzle to eliminate mixing error with standard HDE
A22 battery dispenser along with piston plug. The installation and
the setting instructions should be strictly followed as per the P
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
should have an ETA approval for 100 years age testing. Anchoring
with HIT-V with RE500V3 to be designed as per guidelines of TR
029. Drilling hole with double flute type drill bits/ hollow drill bits
to the required depth by rotary hammer drill, cleaning with
brush and jet of clean air, filling resin and hardener using
serrated nozzle to eliminate mixing error with standard HDE
A22 battery dispenser along with piston plug. The installation and
the setting instructions should be strictly followed as per the P
D Q X rIecoDmmFendWatioXns.
UTheHadUequ¶ateVembedment depth & number of anchors to
be calculated as per PROFIS Anchor Software & the report to be
submitted to the project manager, design engineer for approval.
Scanning before drilling to be done to avoid hitting existing
rebars. For zones with high seismicity, seismic designs are
mandatory. For shear loads, base plate designed by SOFA, filling
sets are mandatory. Anchor RE 500V3+ HIT M20x240
17433 53-18 Providing and supplying HIT-RE500V3 with HIT-V Threaded Rod. 2,881.00 Per No
6 The product should be approved by ETA, ICC, CSTB, COLA,
BZS with Shock approval, Seismic (C1 & C2) approval, Fatigue
and Fire Approvals in anchors to use in cracked concrete, tested
for service temperature of -40 deg. C to +80 deg. C. The chemical
should have an ETA approval for 100 years age testing. Anchoring
with HIT-V with RE500V3 to be designed as per guidelines of TR
029. Drilling hole with double flute type drill bits/ hollow drill bits
to the required depth by rotary hammer drill, cleaning with
brush and jet of clean air, filling resin and hardener using
serrated nozzle to eliminate mixing error with standard HDE
A22 battery dispenser along with piston plug. The installation and
the setting instructions should be strictly followed as per the P
D Q X rIecoDmmFendWatioXns.
UTheHadUequ¶ateVembedment depth & number of anchors to
be calculated as per PROFIS Anchor Software & the report to be
submitted to the project manager, design engineer for approval.
Scanning before drilling to be done to avoid hitting existing
rebars. For zones with high seismicity, seismic designs are
mandatory. For shear loads, base plate designed by SOFA, filling
sets are mandatory. Anchor RE 500V3+ HIT M24x300
17433 53-19 Providing and supplying HIT-HY200R with HIT-V Threaded Rod. 194.00 Per No
7 The product should be approved by ETA, ICC, CSTB, COLA,
BZS with Shock approval, Seismic (C1 & C2) approval,
Fatigue and Fire Approvals in anchors to use in
cracked/un-cracked concrete. Anchoring with HIT-V with HY200R
to be designed as per guidelines of TR 029. Drilling hole with
double flute type drill bits/hollow drill bits to the required depth by
rotary hammer drill, cleaning with brush and jet of clean air, filling
Bhavan Dept 2021-22 - 2021-2022 - Page 275 of 350 22/04/21 3:36
resin and hardener using serrated nozzle to eliminate mixing error
22/04/2021 - 53
with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be
strictly followed as per the
P D Q X reI coDmmFendWatioXns. UTheHadeUqua¶te
eVmbedment depth & number of anchors to be calculated as per
PROFIS Anchor Software & the report to be submitted to
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
rotary hammer drill, cleaning with brush and jet of clean air, filling
resin and hardener using serrated nozzle to eliminate mixing error
with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be
strictly followed as per the
P D Q X reI coDmmFendWatioXns. UTheHadeUqua¶te
eVmbedment depth & number of anchors to be calculated as per
PROFIS Anchor Software & the report to be submitted to
the project manager, design engineer for approval. Scanning
before drilling to be done to avoid hitting existing rebars. For
zones with high seismicity, seismic designs are mandatory.
For shear loads, base plate designed by SOFA, filling sets are
mandatory. Anchor HY200 + HIT M10x125
17433 53-20 Providing and supplying HIT-HY200R with HIT-V Threaded Rod. 289.00 Per No
8 The product should be approved by ETA, ICC, CSTB, COLA,
BZS with Shock approval, Seismic (C1 & C2) approval,
Fatigue and Fire Approvals in anchors to use in
cracked/un-cracked concrete. Anchoring with HIT-V with HY200R
to be designed as per guidelines of TR 029. Drilling hole with
double flute type drill bits/hollow drill bits to the required depth by
rotary hammer drill, cleaning with brush and jet of clean air, filling
resin and hardener using serrated nozzle to eliminate mixing error
with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be
strictly followed as per the
P D Q X reI coDmmFendWatioXns. UTheHadeUqua¶te
eVmbedment depth & number of anchors to be calculated as per
PROFIS Anchor Software & the report to be submitted to
the project manager, design engineer for approval. Scanning
before drilling to be done to avoid hitting existing rebars. For
zones with high seismicity, seismic designs are mandatory.
For shear loads, base plate designed by SOFA, filling sets are
mandatory. Anchor HY200+HIT M12x150
17433 53-21 Providing and supplying HIT-HY200R with HIT-V Threaded Rod. 500.00 Per No
9 The product should be approved by ETA, ICC, CSTB, COLA,
BZS with Shock approval, Seismic (C1 & C2) approval,
Fatigue and Fire Approvals in anchors to use in
cracked/un-cracked concrete. Anchoring with HIT-V with HY200R
to be designed as per guidelines of TR 029. Drilling hole with
double flute type drill bits/hollow drill bits to the required depth by
rotary hammer drill, cleaning with brush and jet of clean air, filling
resin and hardener using serrated nozzle to eliminate mixing error
with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be
strictly followed as per the
Bhavan Dept 2021-22 - 2021-2022 - Page 276 of 350 22/04/21 3:36
P D Q X reI coDmmFendWatioXns. UTheHadeUqua¶te
22/04/2021 - 53
eVmbedment depth & number of anchors to be calculated as per
PROFIS Anchor Software & the report to be submitted to
the project manager, design engineer for approval. Scanning
before drilling to be done to avoid hitting existing rebars. For
zones with high seismicity, seismic designs are mandatory.
For shear loads, base plate designed by SOFA, filling sets are
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17435 53-40 Suppling, Drilling/Cleaning hole and fixing HILTI make heavy duty 2,239.00 Per No
8 ETA Approved HAS- U Chemical Anchor of appropriate size and
fixing plates subsequently. Anchor comprises of HVU-2 flexible
foil capsule that contains styrene free Urethane Methacrylate resin,
hardener, quartz, sand/corundum and HAS-U threaded rod of
minimum 5.8 steel grade, galvanized to minimum 5 microns.
Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design
report based on design loads & other parameters as provided by
consultants. Chemical anchors should be designed in accordance
with EOTA-TR-029 ‡ J X Lfor GancHhoraOge Lof
cQhemHicaVl anchors for use in F R QforF approval.
Application at site should be done as per manufacturer
guidelines. Any report submittal with Installation pictures should
be done using CFS-DM Software, which shall be charged extra.
Anchor HVU2+ HAS U M24x300
17435 53-41 Suppling, Drilling/Cleaning hole and fixing HILTI make heavy duty 6,615.00 Per No
9 ETA Approved HAS- U Chemical Anchor of appropriate size and
fixing plates subsequently. Anchor comprises of HVU-2 flexible
foil capsule that contains styrene free Urethane Methacrylate resin,
hardener, quartz, sand/corundum and HAS-U threaded rod of
minimum 5.8 steel grade, galvanized to minimum 5 microns.
Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design
report based on design loads & other parameters as provided by
consultants. Chemical anchors should be designed in accordance
with EOTA-TR-029 ‡ J X Lfor GancHhoraOge Lof
cQhemHicaVl anchors for use in F R QforF approval.
Application at site should be done as per manufacturer
guidelines. Any report submittal with Installation pictures should
be done using CFS-DM Software, which shall be charged extra.
Anchor HVU2+ HAS U M30 x 270
Specification:
Rate In (Rs)
Item Description Rate Unit
17436 54-3-2 Supplying, installing, testing and commissioningwith perfect 1,22,465.00 Each
7 aligning, proper levelling of jockey pump of 240 LPM at 105 m
head 20 HP(15 kW), 3 phase, 415 volt, 50Hz or ofsuitable HP with
suitable stages as perspecification no. FF-MFP/JP
54-4 Booster Pump
17436 54-4-1 Supplying, installing, testing and commissioningwith perfect 30,172.00 Each
8 aligning, proper levelling of booster pump of 180 LPM at 40 m
Head, 5 HP(3.75 KW), 3 phase, 415 volt, 50Hz or ofsuitable HP
with suitable stages as perspecification no. FF-MFP/BP
17436 54-4-2 Supplying, installing, testing and commissioningwith perfect 36,979.00 Each
9 aligning, proper levelling of booster pump of 450 LPM at 35 m
head 7.5 HP(5.5 KW), 3 phase, 415 volt, 50Hz or ofsuitable HP
with suitable stages as perspecification no. FF-MFP/BP
17437 54-4-3 Supplying, installing, testing and commissioningwith perfect 44,347.00 Each
0 aligning, proper levelling of boosterpump of 460 LPM at 40m head
10 HP(7.5 KW), 3 phase, 415 volt, 50Hz or ofsuitable HP with
suitable stages as perspecification no. FF-MFP/BP
17437 54-4-4 Supplying, installing, testing and commissioningwith perfect 57,098.00 Each
1 aligning, proper levelling of boosterpump of 460 LPM at 40m head
10 HP(7.5 KW), 3 phase, 415 volt, 50Hz or ofsuitable HP with
suitable stages as perspecification no. FF-MFP/BP
54-5 Pipes
17437 54-5-1 Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of 311.00 Meter
2 size 20 mm dia with necessary fittings complete as per
specification no. FF-PP
17437 54-5-2 Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of 403.00 Meter
3 size 25 mm dia with necessary fittings complete as per
specification no. FF-PP
17437 54-5-3 Supplying and erecting G.I. pipe above groundof ‘C’ class ERW of 723.00 Meter
4 size 50 mm dia with necessary fittings complete as per
specification no.FF-PP
17437 54-5-4 Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of 953.00 Meter
5 size 65 mm dia with necessary fittings complete as per
specification no. FF-PP
17437 54-5-5 Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of 1,148.00 Meter
6 size 75/80 mm dia with necessary fittings complete as per
specification no. FF-PP
Rate In (Rs)
Item Description Rate Unit
17437 54-5-6 Supplying and erecting G.I. pipe above groundof ‘C’ class ERW of 1,566.00 Meter
7 size 100 mm dia with necessary fittings complete as per
specification no.FF-PP
17437 54-5-7 Supplying and erecting G.I. pipe above groundof ‘C’ class ERW of 2,293.00 Meter
8 size 150 mm dia with necessary fittings complete as per
specification no.FF-PP
17437 54-5-8 Supplying and erecting G.I. pipe above groundof ‘C’ class ERW of 3,583.00 Meter
9 size 200 mm dia with necessary fittings complete as per
specification no.FF-PP
17438 54-5-9 Providing coating of bitumen paint & 4mmthick wrapping for 381.00 Meter
0 underground 100 mmring main of fire fighting system.
17438 54-5-10 Providing coating of bitumen paint & 4mmthick wrapping for 503.00 Meter
1 underground 150 mmring main of fire fighting system.
17438 54-5-11 Providing coating of bitumen paint & 4mmthick wrapping for 679.00 Meter
2 underground 200 mmring main of fire fighting system
54-6 Valves
17438 54-6-1 Supplying and erecting cast iron foot valve ball type/flap type of 4,750.00 Each
3 size 80 mm dia with strainer for negative suction complete as per
specification no. FF-VL/FV
17438 54-6-2 Supplying and erecting cast iron foot valve ball type/flap type of 6,823.00 Each
4 size 100 mm dia with strainer for negative suction complete as per
specification no. FF-VL/FV
17438 54-6-3 Supplying and erecting cast iron foot valve balltype/flap type of 17,005.00 Each
5 size 150 mm dia with strainerfor negative suction complete as per
specificationno. FF-VL/FV
17438 54-6-4 Supplying and erecting cast iron foot valve balltype/flap type of 29,285.00 Each
6 size 200 mm dia with strainerfor negative suction complete as per
specificationno. FF-VL/FV
17438 54-6-5 Supplying and erecting 75/80 mm dia end linestrainer for positive 4,245.00 Each
7 suction complete as perspecification no. FF-VL/ELS
17438 54-6-6 Supplying and erecting 100 mm dia end linestrainer for positive 6,010.00 Each
8 suction complete as perspecification no. FF-VL/ELS
17438 54-6-7 Supplying and erecting 150 mm dia end linestrainer for positive 9,583.00 Each
9 suction complete as perspecification no. FF-VL/ELS
17439 54-6-8 Supplying and erecting 200 mm dia end linestrainer for positive 54,041.00 Each
0 suction complete as perspecification no. FF-VL/ELS
Rate In (Rs)
Item Description Rate Unit
17439 54-6-9 Supplying and erecting cast iron double flangesluice valve 75/80 5,441.00 Each
1 mm dia. complete as perspecification no. FF-VL/SV
17439 54-6-10 Supplying and erecting cast iron double flangesluice valve 100 mm 7,994.00 Each
2 dia. complete as perspecification no. FF-VL/SV
17439 54-6-11 Supplying and erecting cast iron double flange sluice valve 160 12,444.00 Each
3 mm dia. complete as per specification no. FF-VL/SV
17439 54-6-12 Supplying and erecting cast iron double flange sluice valve 200 21,188.00 Each
4 mm dia. complete as per specification no. FF-VL/SV
17439 54-6-13 Supplying & erecting cast iron double flangebutterfly valve of size 2,297.00 Each
5 50 mm dia. completeas per specification no. FF-VL/BFV
17439 54-6-14 Supplying & erecting cast iron double flangebutterfly valve of size 2,471.00 Each
6 65 mm dia. completeas per specification no. FF-VL/BFV
17439 54-6-15 Supplying & erecting cast iron double flangebutterfly valve of size 2,930.00 Each
7 75/80 mm dia.complete as per specification no. FF-VL/BFV
17439 54-6-16 Supplying & erecting cast iron double flangebutterfly valve of size 3,784.00 Each
8 100 mm dia. completeas per specification no. FF-VL/BFV
17439 54-6-17 Supplying & erecting cast iron double flangebutterfly valve of size 6,021.00 Each
9 150 mm dia. completeas per specification no. FF-VL/BFV
17440 54-6-18 Supplying & erecting cast iron double flangebutterfly valve of size 8,958.00 Each
0 200 mm dia. completeas per specification no. FF-VL/BFV
17440 54-6-19 Supplying and erecting cast iron double flangeNRV of size 75/80 5,620.00 Each
1 mm dia complete as perspecification no. FF-VL/NRV
17440 54-6-20 Supplying and erecting cast iron double flangeNRV of size 100 mm 7,855.00 Each
2 dia complete as perspecification no. FF-VL/NRV
17440 54-6-21 Supplying and erecting cast iron double flangeNRV of size 150 mm 12,303.00 Each
3 dia complete as perspecification no. FF-VL/NRV
17440 54-6-22 Supplying and erecting cast iron double flangeNRV of size 200 mm 19,399.00 Each
4 dia complete as perspecification no. FF-VL/NRV
17440 54-6-23 Supplying and erecting cast iron double flange ball type NRV of 8,180.00 Each
5 size 75/80 mm dia complete asper specification no. FF-VL/NRV
17440 54-6-24 Supplying and erecting cast iron double flange ball type NRV of 10,951.00 Each
6 size 100 mm dia complete as per specification no. FF-VL/NRV
17440 54-6-25 Supplying and erecting cast iron double flange ball type NRV of 25,755.00 Each
7 size 150 mm dia complete asper specification no. FF-VL/NRV
Rate In (Rs)
Item Description Rate Unit
17440 54-6-26 Supplying and erecting cast iron double flange ball type NRV of 42,334.00 Each
8 size 200 mm dia complete as per specification no. FF-VL/NRV
17440 54-6-27 Supplying & erecting gun metal gate valveof size 20 mm dia 933.00 Each
9 complete as perspecification no. FF-VL/GV
17441 54-6-28 Supplying & erecting gun metal gate valveof size 25 mm dia 1,196.00 Each
0 complete as perspecification no. FF-VL/GV
17441 54-6-29 Supplying & erecting gun metal gate valveof size 50 mm dia 1,255.00 Each
1 complete as perspecification no. FF-VL/GV
17441 54-6-30 Supplying and erecting gun metal singleoutlet hydrant valve fitted 8,303.00 Each
2 with necessaryaccessories complete as per specification no. FF
VL/HV
17441 54-6-31 Supplying and erecting stainless steel singleoutlet hydrant valve 5,307.00 Each
3 fitted with necessaryaccessories complete as per specification no.
FF VL/HV
17441 54-6-32 Supplying and erecting gun metal doubleoutlet hydrant valve fitted 16,064.00 Each
4 with necessaryaccessories complete as per specification no. FF
VL/HV
17441 54-6-33 Supplying and erecting stainless steel doubleoutlet hydrant valve 11,445.00 Each
5 fitted with necessaryaccessories complete as per specification no.
FF VL/HV
54-7 Fire Fighting Accessories
17441 54-7-1 Supplying & installing one piece mouldedHDPE / fibre water tank 10,404.00 Each
6 for negative suctiononly, having capacity 1000 litres fitted
withnecessary accessories complete as per specificationno.
FF-FFA/PT
17441 54-7-2 Supplying and installing wall mounting swinging Hose reel drum 6,592.00 Each
7 fitted with 19 mm dia. 30mlong high pressure polypropylene
(Polyhose)fitted with necessary accessories complete as
perspecification no. FF-FFA/HV
17441 54-7-3 Supplying fire fighting controlled percolation(C.P.) Hose pipe, 3,918.00 Each
8 63mm dia, 15m inlength, fitted with necessary accessories
completeas per specification no. FF-FFA/CPH
17441 54-7-4 Supplying fire fighting reinforced rubber lined(R.R.L.) hose pipe, 4,854.00 Each
9 63mm dia, 15m inlength, fitted with necessary accessories
completeas per specification no. FF-FFA/RRL
17442 54-7-5 Supplying & erecting high pressure poly propylene hose pipe 19 182.00 Meter
0 mm dia complete asper specification no. FF-FFA/HOP
Rate In (Rs)
Item Description Rate Unit
17442 54-7-6 Supplying & erecting high pressure rubber hosepipe 19 mm dia 129.00 Meter
1 complete as per specificationno. FF-FFA/RHP
17442 54-7-7 Supplying & erecting gun metal branch pipeof 63 mm dia fitted 1,787.00 Each
2 with 20 mm diadetachable hexagonal nozzle complete as
perspecification no. FF-FFA/NZ
17442 54-7-8 Supplying & erecting stainless steel branchpipe 63 mm dia fitted 1,820.00 Each
3 with 20 mm diadetachable hexagonal nozzle complete as
perspecifications no. FF-FFA/NZ
17442 54-7-9 Supplying & erecting gun metal chromeplated nozzle, 19 mm dia 907.00 Each
4 complete as perspecification no. FF-FFA/NZ
17442 54-7-10 Supplying and erecting fire brigade header of150 mm dia, for 8,589.00 Each
5 supplying water in fire tankcomplete as per specification no.
FF-FA/FBC
17442 54-7-11 Supplying and erecting fire brigade header(Siamese connection) of 1,059.00 Each
6 150 mm dia forsupplying water to wet riser system complete asper
specification no. FF-FFA/SMC
17442 54-7-12 Supplying and installing air vessel of 300 mmdia 1.5m in height 15,468.00 Each
7 M.S. tank installedinside pump house / on terrace complete as
perspecification no. FF-FFA/ACT
17442 54-7-13 Supplying and erecting 20/25mm dia gun metal air release cock, 764.00 Each
8 with necessary G.I. coupling to be fitted on top of air vessel or on
wet riser complete as per specification no. FFFFA/ARV
17442 54-7-14 Supplying and installing pressure gauge of 100mm dia., 0-300 PSI 702.00 Each
9 or 0-14 kg per cm squarefitted with 12/15 mm dia. pad cock
valve, and G.I.pipe, elbow etc. complete as per specification no.
FF-FFA/PG
17443 54-7-15 Supplying and installing pressure switch with12/15 mm dia 1,603.00 Each
0 isolation valve, G.I. nipple,elbow, etc complete as per specification
no. FF FFA/PS
17443 54-7-16 Supplying and erecting one no. brass orifice platehaving 6 mm. 920.00 Each
1 thickness, 140 mm outer diaand required/proper diameter of inner
hole at everysingle outlet hydrant valve as per specification no.
FF-FFA/OP
17443 54-7-17 Supplying and erecting one no. brass orifice platehaving 6 mm. 932.00 Each
2 thickness, 160 mm outer diaand required/proper diameter of inner
hole at everydouble outlet hydrant valve as per specification no.
FF-FFA/OP
Rate In (Rs)
Item Description Rate Unit
17443 54-7-18 Supplying and erecting M.S./CRCA cabinet forhousing single 4,923.00 Each
3 hydrant valve (size 400 x 400x 400mm.) made from 16 SWG
sheet and angleiron 25 mm. x 25 mm. x 4 mm. having front
doorswith viewing glass (8"x6") and lockingarrangement with
necessary fixing material suchas rubber bidding etc. duly painted
in post box redcolour.
17443 54-7-19 Supplying and erecting M.S./CRCA cabinet forhousing Fire 7,570.00 Each
4 Brigade / SIEMESEconnections (size 1250 x 400 x 300 mm.)
madefrom 16 SWG sheet and angle iron 25 mm. x 25mm. x 4 mm.
having front doors with viewing glass(8" x 6") and locking
arrangement with necessaryfixing material such as rubber bidding
etc. dulypainted in post box red colour.
17443 54-7-20 Supplying and erecting M.S./CRCA cabinetfor housing Floor 14,549.00 Each
5 Hydrant valve, hosepipe, hose reel and branch pipe (size 1000x
736 x 736 mm.) made from 16 SWG sheetand angle iron 25 x 25 x
4 mm. having front doorswith viewing glass (8"x6") and
lockingarrangement with necessary fixing material such asrubber
bidding etc. duly painted in post box redcolour.
54-8 Conventional Fire Alarm System
17443 54-8-1 Supplying, installing, testing and commissioning heat detector 1,620.00 Each
6 complete on box as perspecification no. FF-FAS/HD
17443 54-8-2 Supplying, installing, testing and commissioning optical type 1,736.00 Each
7 smoke detector complete on boxas per specification no. FF-FAS/SD
17443 54-8-3 Supplying, installing, testing and commissioning four wire 33,008.00 Each
8 conventionally single endedreflected type beam smoke detector
with 8“ receiver . The range of smoke detector is max 164 feet
17443 54-8-4 Supplying, installing, testing and commissioning four wire 53,556.00 Each
9 conventionally single endedreflected type beam smoke detector
with 8"receiver . The range of smoke detector is max 325 feet.For
large areas and passages beam detectors should be preferably
used (Item no. 54-8-3 & 54-8-4)
17444 54-8-5 Supplying, installing, testing and commissioning manual call point 546.00 Each
0 (Pill box) with break glasspush button in metal enclosure complete
as perspecification no. FF-FAAS/MCP
17444 54-8-6 Supplying, installing, testing and commissioning hooters with 643.00 Each
1 CRCA enclosure complete as perspecification no. FF-FAAS/HTR
17444 54-8-7 Supplying, installing, testing and commissioning remote response 212.00 Each
2 indicators complete as per specification no. FF-FAAS/RRI
Rate In (Rs)
Item Description Rate Unit
17444 54-8-8 Supplying, installing, testing and commissioning FR, XLPE 98.00 Meter
3 armoured cable 2 core 1.5sq.mm. copper conductor complete
erected onwall/ ceiling complete as per specification no. CB LT/CU
17444 54-8-9 Supplying, installing, testing and commissioning FR, XLPE 120.00 Meter
4 armoured cable 4 core 1.5sq.mm. copper conductor complete
erected onwall/ ceiling complete as per specification no. CB LT/CU
17444 54-8-10 Supplying, installing, testing and commissioning FR, XLPE 234.00 Meter
5 armoured cable 8 core 1.5sq.mm. copper conductor complete
erected onwall/ ceiling complete as per specification no. CB LT/CU
17444 54-8-11 Supplying, installing, testing and commissioning FR, XLPE 325.00 Meter
6 armoured cable 12 core 1.5sq.mm. copper conductor complete
erected onwall/ ceiling complete as per specification no. CB LT/CU
17444 54-8-12 Supplying, installing, testing and commissioning of 2 Zones 17,617.00 Each
7 Microprocessor basedconventional fire alarm control panel(FACP)
with standard accessories complete asper specification no.
FF-FAAS/FACP Note:- 1. Increase overall rate by 25 % for
additional zone as per requirement.2. For item no 54-8-8 to
54-8-11 increase overall rate by 7.5% for FRLS.3. Above rates are
for Non-Addressable type
17444 54-8-13 Supplying, installing, testing and commissioning 2 Zone, local 5,350.00 Each
8 signal control panel (LCP) withstandard accessories complete as
per specificationno. FF-FAAS/LCP Note:- 1. Increase overall rate by
10 % for additional zone as per requirement.2. Above items are
for Non-Addressable type
54-9 P A System
17444 54-9-1 Supplying, erecting, testing and commissioning amplifier 120 W for 17,149.00 Each
9 public address systemsuitable to operate on 230 Volts A.C. / 12
VoltsD.C. supply complete as per specification no. FF PA/AFR
17445 54-9-2 Supplying, erecting, testing and commissioning sound column 15 2,608.00 Each
0 Watts complete as perspecification no. FF-PA/SOC
17445 54-9-3 Supplying, erecting, testing and commissioning microphone 4,972.00 Each
1 complete as per specification no.FF-PA/MIC
17445 54-9-4 Supplying, erecting, testing and commissioning stand for 1,767.00 Each
2 microphone complete
17445 54-9-5 Supplying, erecting, testing and commissioning table stand for 1,109.00 Each
3 microphone complete.
17445 54-9-6 Supplying, erecting, testing and commissioning of 2 core shielded 547.00 Meter
4 microphone cable complete as per specification no. FF-PA/MCC
Rate In (Rs)
Item Description Rate Unit
17445 54-9-7 Supplying, erecting, testing and commissioning of 0.5 sq mm 36.00 Meter
5 speaker wire complete.
17445 54-9-8 Supplying, erecting, testing and commissioning of 0.75 sq mm 45.00 Meter
6 speaker wire complete.
17445 54-9-9 Supplying, erecting, testing and commissioning of 1 sq mm 51.00 Meter
7 speaker wire complete.
17445 54-9-10 Supplying, erecting, testing and commissioning of 1.5 sq mm 67.00 Meter
8 speaker wire complete.
54-10 Sprinklers
17445 54-10-1 Supplying, erecting, testing and commissioningof 15 mm (½") dia. 438.00 Each
9 NBCM Body chrome finished quartzoid bulb sprinkler having 68º
Cfixed temperature rating with deflector disc ofconventional
construction complete as perspecification no. FF-SPR
17446 54-10-2 Supplying, erecting, testing and commissioningvane type water 6,701.00 Each
0 flow detector suitable for detecting flow of water in wet sprinkler
pipe ofmain line or branch lines of 75/80 mm diahaving following
features 1) Visual switchactivation 2) Rugged switch assembly 3)
Heavyduty aluminium pipe saddles 4) Durable metalenclosure 5)
Steel U bolts for secure mounting 6)Two SPDT ( Single pole double
track )synchronised switches 7) serviceable withoutdraining pipes
17446 54-10-3 Supplying, erecting, testing and commissioningvane type water 7,652.00 Each
1 flow detector suitable for detecting flow of water in wet sprinkler
pipe ofmain line or branch lines of 100 mm dia havingfollowing
features 1) Visual switch activation 2)Rugged switch assembly 3)
Heavy duty aluminiumpipe saddles 4) Durable metal enclosure 5)
Steel Ubolts for secure mounting 6) Two SPDT ( Singlepole double
track ) synchronised switches 7)serviceable without draining pipes
54-11 FIRE SEALANT SYSTEM
17446 54-11-1 Supplying and erecting fire resistant mortar(20 kg) with fire 8,646.00 Per Job
2 resistance class S90 as per National Electrical Code (NEC)
SP30-2011suitable to seal the openings with all kinds ofcables,
pipes and cable support system in steel andaluminium and plastic
profiles ( Except hollow coreconductors). The residual openings
shall be closedwith filler, as per specification no. FF-FRM Note:- For
estimating purpose consider one bag of 20kg to cover 300mm x
400mm area 150mm thick or 0.018 m3
54-12 FIRE SAFETY AUDIT
17446 54-12-1 Complete fire Audit (54.12.1) 7.00 Sq.m
3 Providing/conducting complete fire audit
Bhavan Dept 2021-22 including submission
- 2021-2022 - of fire Page
audit 295
report for the
of 350 22/04/21 3:36
22/04/2021 - 54 whole premises
Note:- Specification of the above all items conform
to respective Indian Standards.
Above items are conforming to relevant IS
as mentioned below:-
IS 1520:1980 Horizontal Centrifugal Pumps For
Clear, Cold, Fresh Water
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17449 60-11 (Providing second class Burnt Brick masonry in pillar of curved 5,069.00 Cu.M
3 shapes with 100% crush sand )
Providing second class Burnt Brick masonry with conventional /
I.S. type bricks in cement mortar 1:4 including scaffolding, racking
out joints and watering etc.in pillar of curved shapes as shown in
the drawing or as directed complete.
17449 60-12 ( Providing fly ash brick masonry in foundation and plinth with 4,761.00 Cu.M
4 100% crush sand )
Providing and laying fly ash brick masonry with conventional / I.S.
type fly ash bricks in C.M. 1:6 in foundation and plinth including
bailing
out water manually striking joints, racking out joints watering and
scaffolding etc. complete.
17449 60-13 ( Providing fly ash brick masonry in superstructure with 100% 4,915.00 Cu.M
5 crush sand )
Providing and laying fly ash brick masonry with conventional/ I.S.
type bricks in cement mortar 1:6 in superstructure including
striking joints,raking out joints, watering and scaffolding etc.
Complete
17449 60-14 ( Providing Second class fly ash brick masonry with 657.00 Sq.m
6 conventional /I.S. type bricks in cement mortar 1:4 in half brick
thick wall with 100% crush sand )
Providing and laying Second class fly ash brick masonry with
conventional /I.S. type bricks in cement mortar 1:4 in half brick
thick wall including mild steel longitudinal reinforcement of two
bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at
every third course, properly bent and bounded at ends scaffolding
raking out joints and watering etc. complete.
17449 60-15 ( Providing uncoursed rubble masonry in foundation and plinth 2,850.00 Cu.M
7 with 100% crush sand )
Providing and laying uncoursed rubble masonry of trap / granite /
quartzite / gneiss stones in cement mortar 1:6 in foundation and
plinth of inner walls / in plinth of external walls including bailing
out water manually , striking joints on un exposed faces and
watering etc.complete.
17449 60-16 ( Providing uncoursed rubble masonryin basements with 100% 2,230.00 Cu.M
8 crush sand )
Providing and laying uncoursed rubble masonry of trap / granite /
quartzite / gneiss stones in cement mortar 1:5 in basements
including scaffolding, bailing out water manually, racking out joints
when plastering is to be done striking joints where no pointing or
plastering is to be done and watering etc.complete.
Bhavan Dept 2021-22 - 2021-2022 - Page 300 of 350 22/04/21 3:36
22/04/2021 - 60
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17449 60-17 ( Providing uncoursed rubble masonry in superstructure with 100% 2,550.00 Cu.M
9 crush sand )
Providing and laying uncoursed rubble masonry of trap / granite /
quartzite / gneiss stones in cement mortar 1:6 in superstructure
includingracking out joints when plastering is to be done / striking
jointswhen no plastering is to be done on inside watering and
scaffolding etc.complete.
17450 60-18 ( Providing and laying masonry hollow block 100 x 200 x 400 mm 558.00 Sq.m
0 with 100% crush sand for superstructure )
Providing and laying masonry of I.S. Standard C.C. hollow block
Sq.m 100 x 200 x 400 mm with 100 mm thick in cement mortar
1:6 proportion for superstructure including curing, scaffolding etc.
complete.
17450 60-19 ( Providing and laying masonry hollow block 200 x 200 x 400 mm 659.00 Sq.m
1 with 100% crush sand for superstructure )
Providing and laying masonry of I.S. Standard C.C. hollow block
200 x 200 x 400 with 200mm thick mm in cement mortar 1:6
proportion for superstructure including curing, scaffolding
etc.complete
17450 60-20 ( Providing and constructing masonry in precast solid Concrete 4,527.00 Cu.M
2 Block with 100% crush sand )
Providing and constructing masonry in precast solid Concrete Block
(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987)having
compressive strength 5-00 N/mm2) of size (300 mm x 200mm x
150mm) in cement mortar 1:6 for superstructure including striking
joints on unexposed faces, racking out joints on exposed faces,
watering, curing and scaffolding etc. complete.
17450 60-21 Providing and laying Rough Kota Stone Flooring 50mm to 60mm 975.00 Sq.m
3 thick and of required width in plain/ diamond pattern on a bed of
1:6 C.M. including cement float, striking joints, pointing in cement
mortar 1:3 curing and cleaning etc. etc. complete.
17450 60-22 Providing and laying River Finish kota Stone Flooring 50mm to 1,025.00 Sq.m
4 60mm thick and of required width in plain/ diamond pattern on a
bed of 1:6 C.M. including cement float, striking joints, pointing in
cement mortar 1:3 curing and cleaning etc. etc. complete.
17450 60-23 Providing and laying in position flooring of Flame finish granite 4,250.00 Sq.m
5 stone of approved shade and size 18 mm to 20 mm thick on bed
1:6 cement mortar including cement floats striking joints, pointing
in C.M. 1:3 curing and cleaning etc. complete.
17450 60-24 Providing and fixing machine cut machine polished 18 mm to 20 4,400.00 Sq.m
6 mm thick Flame finish granite stone for treads and risers of steps
and staircases of approved Pagecolour
301 ofand
350 shade with rounded 22/04/21 3:36
Bhavan Dept 2021-22 - 2021-2022 -
moulding and three grooved line for the treads on bed of 1:4
22/04/2021 - 60
Cement mortar including float filling joints with neat cement slurry
curing polishing and cleaning etc. complete.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17453 62-1 Providing and fixing corrugated deck sheets for roofing with 1,300.00 Sq.m
2 including fastening with struds and bolts, lead and bitumen
washers as per drawing etc. complete.
17453 62-2 Puff Sheet ( 60 mm ) : Providing and fixing in position sandwich 3,350.00 Sq.m
3 puff panel using 0.8 mm thick precoated Zinkaluminium sheet with
profile with 48 kg/m^3 density expanded foam 9 puff item to
include necessary fixure and fittings scaffolding for erection
etc.complete
17453 62-3 Puff Sheet ( 80 mm ) :Providing and fixing in position sandwich 3,500.00 Sq.m
4 puff panel using 0.8 mm thick precoated Zinkaluminium sheet with
profile with 48 kg/m^3 density expanded foam 9 puff item to
include necessary fixure and fittings scaffolding for erection
etc.complete
17453 62-4 Commercial plywood : 961.00 Sq.m
5 Providing and fixing commercial plywood 12 mm thickness (ISI
mark) for partition and ceiling (as per department instruction )
Recommended plywood companies : durian ucotech greenply,
mars (marsgold 100% garjan), euro, orchid, century with phenol
bonded etc.
17453 62-5 Providing and fixing 6 mm thick commercial plywood ( durian 641.00 Sq.m
6 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
17453 62-6 Providing and fixing 8 mm thick commercial plywood ( durian 748.00 Sq.m
7 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
17453 62-7 Providing and fixing 12 mm thick commercial plywood ( durian 773.00 Sq.m
8 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
17453 62-8 Providing and fixing 19 mm thick commercial plywood ( durian 1,388.00 Sq.m
9 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
17454 62-9 Providing and fixing 6 mm thick waterproof plywood ( durian 983.00 Sq.m
0 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
17454 62-10 Providing and fixing 8 mm thick waterproof plywood( durian 1,175.00 Sq.m
1 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
Rate In (Rs)
Item Description Rate Unit
17454 62-11 Providing and fixing 12 mm thick waterproof plywood ( durian 1,324.00 Sq.m
2 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
17454 62-12 Providing and fixing 19 mm thick waterproof plywood( durian 1,602.00 Sq.m
3 ucotech greenply, mars (marsgold 100% garjan), euro, orchid,
century with phenol bonded etc (ISI) )
17454 62-13 Providing and fixing 6 mm thick commercial ply with salwood 960.00 Sq.m
4 strips of 50-75 mm size
62-14 Hardware fittings for Toughen glass partition : Providing hardware
fittings for Toughen glass partition
17454 62-14-A P.S 9500 floorspring 9,545.00 Per No
5
17454 62-14-B H.H.H 32 door handle 3,672.00 Per No
6
17454 62-14-C H.T.P 40 Hoare /side panel 3,055.00 Per No
7
17454 62-14-D H.H.H 14 glass to glass hinge 4,575.00 Per No
8
17454 62-14-E H.T. P 64 connector patch 999.00 Per No
9
17455 62-14-F H.T.P 65 side connector 1,162.00 Per No
0
17455 62-14-G H.T.P 61 connector 2,282.00 Per No
1
17455 62-14-H H.T.P 30 over panel without pivot 2,858.00 Per No
2
17455 62-14-I H.T.P 10 bottom patch 1,576.00 Per No
3
17455 62-14-J H.T.P 20 top patch 1,527.00 Per No
4
17455 62-14-K H.P 2-10 3,050.00 Per No
5
17455 62-14-L Cut outs 425.00 Per No
6
17455 62-14-M Making required holes from company 170.00 Per No
7
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17457 62-28 Providing & fixing 3” 5” size Aluminum Brackets/Runners as per 150.00 Rmt
1 site in charge instructions etc. completed.(Including all
necessaryFittings)
62-29 Providing & fixing all Furniture hardware as per site in charge
instructions Including all brass hardware fittings. ( 3” to 5”sizes )
17457 62-29-A Hinges 150.00 Per No
2
17457 62-29-B Handles 100.00 Per No
3
17457 62-29-C Locks (For cupboards & wardrobes) 275.00 Per No
4
17457 62-29-D Rubber roller (Heavy Duty) 200.00 Per No
5
62-30 Curtains
Providing clothes for curtain of Bombay Dyeing/Binni/Mafatlal etc
brands, stitching as per required size with Frill (Zaller) & fixing at
required places ( including rings ) Note:-Measurement would be
taken as per actual length of window& default width ( i.e . 48”
panha)
17457 62-30-A Curtain (Material Clothes & cost of clothes starting from Rs 100/- 500.00 Rmt
6 Rmt Onwards)
17457 62-30-B Curtain (Material Synthetic Clothes & cost of clothes starting from 1,120.00 Rmt
7 Rmt Rs 250/- onwards)
62-31 Stainless Steel Pipe curtain rod
17457 62-31-A Providing & fixing of SS pipe curtain rods including Brackets as per 225.00 Rmt
8 site in charge instructions & all necessary Fittings etc. completed
17457 62-31-B Providing & fixing of powder coated curtain rods including Brackets 155.00 Rmt
9 as per site in charge instructions & all necessary Fittings
etc .Completed
17458 62-32 Fiber Cushion Chairs 3,050.00 Per No
0 Providing (ORNET MAKE) fiber cushion chairs of
Supremo,Neelkamal brand.Note:-Cushion should be on both Seat
& Backrest.
17458 62-33 PVC Carpet 555.00 Sq.m
1 Providing 1.5 mm thick pvc carpet of approved design n color &
fixing at site as per site in charge instructions etc. completed.Note:
- Dimensions would be considered as per actual carpet size
fixed at site.
Bhavan Dept 2021-22 - 2021-2022 - Page 308 of 350 22/04/21 3:36
22/04/2021 - 62
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17459 62-46 Repairing of old sofa : As per engineer in charge instructions Meter 9,112.00 Rmt
4 repairing of old sofa using
good quality company cloth ( D'decor, Bombay
dyeing,binni,mafatlal etc .) with appropriate density of
foam,providing elastic,new wooden battens, also using good
quality criss cotton as per requirements including hardware fittings
and labour rate
17459 62-47 Water base p u polish : 2,513.00 Sq.m
5 Water base p u polish on old surface
17459 62-48 Supplying Fabric covers for Furniture using approved fabric (250 3,450.00 Sq.m
6 Rs/m), inclusing stiching charges etc complete
17459 62-49 Providing & fixing all Furniture hardware as per site in charge 850.00 Sq.m
7 instructions Including brass hinges, brass handles, Godrej lock,
magnets, and imported sliding channel hardware fittings
17459 62-50 Computer Chairs : 3,100.00 Per No
8 Providing and fixing of computer chairs, including cushion seat and
comfortable back (up and down adjustment) with iron frame as per
drawing and specification approved by Bhavan Rachana
Department, also including transportation and neccessary work,
etc. complete.
Specification:
Rate In (Rs)
Item Description Rate Unit
17460 63-10 Imported Wallpaper including wastage and overlap with all 2,286.00 Sq.m
8 adhesive-providing and fixing of Imported Wallpaper including
wastage and overlap with all adhesive
17460 63-11 All weather synthetic application : 946.00 Sq.m
9 providing and applying five layer all weather synthetic coating for
vollyball,basketball,tennis court over existing concrete or bitumen
base.this includes cleaning existing surface,removing existing
dust,dirt and repairing minor cracks and surface depressions using
crack filler and then applying first layer of primer(uniqprimer) or
filler chemical.then applying second and third layer of sealer or
resurfacer (100% acrylic , concentrated and pigmented emulsion )
which includes repairing all cracks and surface depression using
priroof crack filler and then applying sealer (black or natural white
colour) using silica sand and potable water.after this applying
fourth and fifth layer of synthetic color coating(100% acrylic ,
highly pigmented emulsion) using silica sand.colour coating will be
green,red or bule in colour as per the instructions of site in
charge.after all layers are applied, line marking shall be donewith
width and measurements as per the international standards and
instructions of site in charge.this work will include gurantee of
atleast three years from the application of coat.
17461 63-12 Poviding & Applying Semi Acrylic Paint As per below steps 130.00 Sq.m
0 1)Cleaning 2) 2 coats of acrylic wall putty 3) 1 coat professional
interior wall primer water based 4) 2 coats of Tractor Emulsion
including claning and preparing the existing surface and scaffolding
if necessary
17461 63-13 Providing & Applying External Textured Paint + Applying 402.00 Sq.m
1 Waterproofing Coat as per below steps 1) Cleaning + crack filling
2) 1coat of Waterproofing Chemical 3) 1 Coat Apex Duracast
CrossTex (2mm Thk) 4) 2 Coat of Professional Premium Exterior
Emulsion Apex including claning and preparing the existing surface
and scaffolding if necessary
Specification:
Chapter Name Marble Plate, Granite Plate, Carving of Letter, Image Transfer Technology, Name board
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
MAHANGAR PALIKA & Rest Bottom Design in Eco solvent Print. &
Auditorium Name. In & Direction Arrow 5 mm Thickness Acrylic
Laser cutting with RED HIP
Specification:
Rate In (Rs)
Item Description Rate Unit
17464 65-3-B Central Table (12 x 2 feet) tablecloth with fimbria (zhaller). 121.00 Per No
1 Stage Erection
17464 65-3-C Providing Fibre Cushion chairs 50.00 Per No
2 Stage Erection
17464 65-3-D Providing Iron Chairs 12.00 Per No
3
17464 65-3-E Rostrum (Podium) 294.00 Per No
4
17464 65-3-F Executive Chairs 147.00 Per No
5
17464 65-3-G Fibre Chairs 15.00 Per No
6
65-4 Box Type Arches (Kamani)
As per the Road width providing Box type Arches, ornating the
arches with white cloth & fimbria (zhaller), on the centre of arch
flex should be provided. The height of Arch should be minimum 20
feet.
Notice:-
1) In this work Excavation in any type of road, soil, loose or hard
rock should be done and after the work Excavated pits should be
refill.
2) The rate of the above work is for 3 days and because of if any
reason days exceed beyond 3 days as per engineer incharge per
day 5% of original rate will be given.
17464 65-4-A If Road width till 50 feet 4,620.00 Per No
7
17464 65-4-B If Road width exceed 50 feet (For two side of Road) 6,647.00 Per No
8
17464 65-5 Simple Arch (Kaman) 1,192.00 Per No
9 Providing Bamboo from two side ornate the Arch with cloth.
Instruction
1) In this work Excavation in any type of road , soil, loose or hard
rock should be done and after the work Excavated pits should be
refill.
2) The rate of the above work is for 3 days and because of if any
reason days exceed beyond 3 days as per engineer incharge per
day 5% of original rate will be given.
17465 65-6 Railing of Bamboo 100.00 Rmt
0 As per department Instruction the height of Railing should be 1 to
1.5 m. After the completion of work the Railing should be
Bhavan Dept 2021-22 removed.
- 2021-2022 - Page 318 of 350 22/04/21 3:36
22/04/2021 - 65 Instructions:-
1) In this work Excavation in any type of road, soil, loose or hard
rock should be done and after the work Excavated pits should be
refill.
2) The rate of the above work is for 3 days and because of if any
reason days exceed beyond 3 days as per engineer incharge per
day 5% of original rate will be given.
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
9
17466 65-10-E Providing Bolster with covering of white cloth 30.00 Per No
0
65-11 Preparing Wooden Platform Stage as per Dept. Instruction.
Instructions:-
1) In this work Excavation in any type of road, soil, loose or hard
rock should be done and after the work Excavated pits should be
refill.
2) The rate of the above work is for 3 days and because of if any
reason days exceed beyond 3 days as per engineer incharge per
day 5% of original rate will be given.
17466 65-11-A At Height of 1 feet 200.00 Sq.m
1
17466 65-11-B Erecting the wooden Poles (Prepare the Bajuband cover with the 100.00 Sq.m
2 white cloth at height of 10 feet)
65-12 At the distance of 8 to 10 feet erect the wooden poles & in that at
the height of 10 feet & join the Fimbria (Zhaller) of width 6 inches
to 1 feet.
Instructions:-
1) In this work Excavation in any type of road, soil, loose or hard
rock should be done and after the work Excavated pits should be
refill.
2) The rate of the above work is for 3 days and because of if any
reason days exceed beyond 3 days as per Engineer incharge per
day 5% of original rate will be given.
17466 65-12-A At the height 10 feet & join the Fimbria (Zhaller) of width 6 inches 85.00 Sq.m
3 to 1 feet
17466 65-13 Pendall using Cloth (Kapadi Mandav) 135.00 Sq.m
4 Erect the Bamboo at a distance of 10 feet/3 m & over that using
the cloth provide the roof.The ht. of pendall should be minimum 10
feet to 20 feet.
Instructions:-
1) In this work Excavation in any type of road, soil, loose or hard
rock should be done and after the work Excavated pits should be
refill.
2) The rate of the above work is for 3 days and because of if any
reason days exceed beyond 3 days as per Engineer incharge per
day 5% of original rate will be given.
17466 65-14 G.I sheet (Patra) Partition 70.00 Sq.m
5 As per Instruction erect the vertical poles at a distance of 8 to 10
feet & on that provide the horizontal poles & prepare the square,
on that fix the GI sheet (patra) .
Bhavan Dept 2021-22 - 2021-2022 - Page 320 of 350 22/04/21 3:36
Provide the opening in patra where required.
22/04/2021 - 65
Instructions:-
1) In this work Excavation in any type of road, soil, loose or hard
rock should be done and after the work Excavated pits should be
refill.
2) The rate of the above work is for 3 days and because of if any
reason days exceed beyond 3 days as per Engineer incharge per
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17468 66-16 SITC of Repeater panel for the above panel 78,663.00 Per No
9
17469 66-17 SITC of optical smoke detectors 2,045.00 Per No
0
17469 66-18 SITC of Manual Call Points 1,573.00 Per No
1
17469 66-19 SITC of Hooters 1,888.00 Per No
2
17469 66-20 SITC of 2c*1.5 mm2 Cu FRLS cable (multicore) with PVC conduit 157.00 Rmt
3 with all necessary supports
17469 66-22 Fire Extinguishers : 1,840.00 Per No
4 ABC type fire Extinguishers with all required fittings capacity 4
kg.ISI marked
17469 66-25 Fire Extinguishers : 3,067.00 Per No
5 Water foam type fire Extinguishers with all required fittings
capacity 9 liter kg.ISI marked
17469 66-26 Fire Extinguishers : 12,589.00 Per No
6 fire bucket 10 liters capacity heavy quality ISI marked 4 nos with
MS stand
17469 66-27 FM 200 Cylinder : 2,75,319.00 Per No
7 Providing and fixing of FM 200 Cylinder,75 Ltr,Cap with Valve
Assembly
17469 66-28 Pilot Cylinder : 54,355.00 Per No
8 Providing and fixing of Pilot Cylinder,3 Kg Capacity with pnuematic
& Solenoid Valve
17469 66-29 Manifold & Cylinder frame : 15,473.00 Per Set
9 Providing and fixing of Manifold & Cylinder frame, to acuumodate 6
Cylinder
17470 66-30 Non- Return Valve : 3,933.00 Per No
0 Providing and fixing of Non- Return Valve (Master)
17470 66-31 Interconnecting Hoses : 755.00 Per No
1 Providing and fixing of Interconnecting Hoses
17470 66-32 Hose Assembly : 1,699.00 Per No
2 Providing and fixing of Hose Assembly
17470 66-33 Directional Valve : 5,664.00 Per No
3 Providing and fixing of Directional Valve 40 mm dia
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
base coat using river sand and second coat in silica sand final coat
in lime putty (lime + sand + jaggery + bale fruit + linseed oil) in
proportion (1:1:2:4 one part Molasis, 1 part brick powder, 2 part
lime & 4 part sand) in plain finish to stone/brick wall including
slaking of lime not less than for 1 day, preparing jaggery slurry,
bale fruit, raking of joints up to 10 mm thick including double
scaffolding, curing etc. complete.
17473 67-12 Lead sheet of 400mm to 900mm width : 6,642.00 Sq.m
6 Providing and laying lead sheet of 400mm to 900mm width and
upto 1mm thick including proper fixing jointing, soldering joints
with lead rod , including scaffolding if necessary and as directed by
in charge etc. complete
17473 67-13 External 12 to 25 mm thick lime plaster : 583.00 Sq.m
7 Providing and Applying external 12 to 25 mm thick lime plaster in
required coats using (lime + sand + jaggery + bale fruit + linseed
oil) in proportion (first coat 1:2.5, 2nd coat of 1:3, 3rd coat of 1:3)
in plain finish to stone/brick wall including slaking of lime not less
than for 1 day, preparing jaggery slurry, bale fruit, raking of joints
up to 10 mm thick including double scaffolding, curing etc.
complete.( SINGLE COAT PLASTER )
17473 67-14 Cleaning of manglore tiles : 91.00 Sq.m
8 Cleaning of manglore tiles by water pressure without damaging the
existing tiles
17473 67-15 Providing and applying Wacker Chemical ( water base antifungal 185.00 Sq.m
9 silicon treatment )on manglore tiles or stone surface.
17474 67-16 Injecting cement grout : 57.00 kg
0 Injecting cement grout with conbex - 100/- intraplast N-200grout
into concrete / brick work by suitable gun/pump at required
pressures by providing necessary scaffolding, drilling and inserting
12 mm dia aluminium grouting multi-perforated nipples up to
30mm to 40mm depth, using M Seal around the nipple cutting of
nipples after curing, cleaning etc. complete. (This item shall be
paid on actual consumption of cement used in kgs).(Including all
types of machineries)
17474 67-17 Lime putti : 167.00 Sq.m
1 Providing 4 to 6 mm thick in lime putti in 1:1 mixed with white
cement over plastered surface in all positions including scaffolding
and curing complete.
17474 67-18 Erecting H frame scaffolding : 181.00 Sq.m
2 Erecting H frame scaffolding on site for period of 1 Month.( below
rate is appiled on actual nos. of H frame provided on site )
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17476 68-4-A Hand rails Made in SS 304 with 38mm OD, 16 gauge pipe with 3" 1,568.00 Rmt
0 support height and 3mm thick glange fixed with SS Cotch Screw.
Make :- Cryster Engineering
17476 68-4-B Overflow Gratings Suitable for 12" wide over flow gutter modular 1,322.00 Rmt
1 type available in different colors made in PP Plastic Make :- Cryster
Engineering
17476 68-4-C Wall Inlet Regulable type floor inlets mead in ABS plastic having 890.00 Per No
2 max. Flow 10000 Make :- Cryster Engineering
17476 68-4-D Pool Drain 1,525.00 Per No
3
68-5 Pool Ladders MADE in SS 304 with 38 mm OD ,16 gauge hand rails
and anti skid SS trades fitted with nut bolts, 4” dia. flange for
fixing on walls. Height 30”. Step size - 21” length and 3”/4” width
Make :- Cryster Engineering
17476 68-5-A 3 steps 15,720.00 Per No
4
17476 68-5-B 4 steps 17,627.00 Per No
5
68-6 MAINTENANCE EQUIPMENTS
17476 68-6-A Suction Trolley Made in SS 304 wirh FRP Platform mounted with 56,780.00 Per No
6 self priming pump, starter and cable etc. suitable to adopt suction
hose for maintenance and cleaning purpose.
Make :- Cryster Engineering
17476 68-6-B Leaf Rack 932.00 Per No
7
17476 68-6-C Poo brush curved type 1,060.00 Per No
8
17476 68-6-D Suction head maid in SS with Rope wheels and brush 19,068.00 Per No
9
17477 68-6-E Aluminum Telescopic pole 5m long 5,085.00 Per No
0
17477 68-6-F Suction hose 30m long 5,085.00 Per No
1
17477 68-6-G 2 in 1 pH & CL testing kit 865.00 Per No
2
17477 68-6-H Electrical and cabling 297.00 Rmt
3
Rate In (Rs)
Item Description Rate Unit
17477 68-6-I Electrical Control Panel Supply & Installation of Electrical fittings – 55,085.00 Per No
4 Motor control center to house all switch gear and components such
as mains isolator, motor starters, ammeters, switches, fuses,
single phase preventor for pumps. Required MCC for single phase
if required, etc. internally wired and shall be completed in all
respects including all components supplying, laying power &
control cabling in the field of the battery limits
17477 68-7 Dosing System for Chlorine & PH with Container Constant Flow 31,822.00 Per No
5 membrane Dosing System chlorine Dosing to have residual
chlorine presence in the Swimming Pool and act as a backup for
Ozoniser. 15lph @5 bar.
Make:- Pentair or Equivalent
17477 68-8 Ozonisation System Ozonator with concentrator to get the 5,50,847.00 Per No
6 necessary disinfection to kill germs, bacteria and prevent algal
growth to get 2 ppm ozone Booster Pump and Venturi system
sutable for 500000 lit. Pool capacity. Make :- Elteck
68-9 LIFE SAVING EQUIPMENTS
17477 68-9-A Life Buoy 6,780.00 Per No
7
17477 68-9-B Life Saving Loop 4,280.00 Per No
8
17477 68-9-C Loop Holder Pipe 2,860.00 Per No
9
17478 68-9-D Life Guard Chairs 21,186.00 Per No
0
17478 68-9-E Oxygen Cylinder with mask 13,983.00 Per No
1
17478 68-9-F Stretcher 4,237.00 Per No
2
Specification:
17478 69-1 Providing & fixing plain glass of 4 mm thickness for window and 560.00 Sq.m
3 wherever necessary as per dept. instructions, it includes providinG
& using glezing clips, Putty of Kumbh Company etc. complete.
17478 69-2 Providing & fixing plain glass of 5 mm thickness for window and 761.00 Sq.m
4 wherever necessary as per dept. instructions, it includes providing
& using glezing clips, Putty of Kumbh Company etc. complete.
17478 69-3 Providing & fixing plain glass of 6 mm thickness for window and 892.00 Sq.m
5 wherever necessary as per dept. instructions, it includes providing
& using glezing clips, Putty of Kumbh Company etc. complete.
17478 69-4 Providing & fixing plain glass of 8 mm thickness for window and 1,115.00 Sq.m
6 wherever necessary as per dept. instructions, it includes providing
& using glezing clips, Putty of Kumbh Company etc. complete.
17478 69-5 Providing & fixing plain glass of 10 mm thickness for window and 1,382.00 Sq.m
7 wherever necessary as per dept. instructions, it includes providing
& using glezing clips, Putty of Kumbh Company etc. complete.
17478 69-6 Providing & fixing plain glass of 12 mm thickness for window and 1,528.00 Sq.m
8 wherever necessary as per dept. instructions, it includes providing
& using glezing clips, Putty of Kumbh Company etc. complete.
17478 69-7 Providing & fixing frosted glass of 6 mm thickness, it includes 1,193.00 Sq.m
9 providing & using glezing clips, Putty of Kumbh Company etc.
complete.
17479 69-8 Providing & fixing frosted glass of 8 mm thickness, it includes 1,433.00 Sq.m
0 providing & using glezing clips, Putty of Kumbh Company etc.
complete.
17479 69-9 Providing & fixing frosted glass of 10 mm thickness, it includes 1,543.00 Sq.m
1 providing & using glezing clips, Putty of Kumbh Company etc.
complete.
17479 69-10 Providing & fixing plain glass of 12 mm thickness for window and 2,150.00 Sq.m
2 wherever necessary as per dept. instructions, it includes providing
& using glezing clips, Putty of Kumbh Company etc. complete.
17479 69-11 Glass filming / Frosted Film ( Garware / 3 M ) company 523.00 Sq.m
3
17479 69-12 filmimg black / Semi Black 436.00 Sq.m
4
17479 69-13 Providing & fixing 5 mm thick wired glass for window and 830.00 Sq.m
5 wherever necessary as per dept. instructions, it includes providin &
using glezing clips, Putty of Kumbh Company etc. complete.
Bhavan Dept 2021-22 - 2021-2022 - Page 335 of 350 22/04/21 3:36
22/04/2021 - 69
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17479 69-14 Providing & fixing 6 mm thick wired glass for window and 934.00 Sq.m
6 wherever necessary as per dept. instructions, it includes providin &
using glezing clips, Putty of Kumbh Company etc. complete.
17479 69-15 Providing and fixing 12mm thick Toughen glass as per drawing 2,929.00 Sq.m
7 with all required fittings, etc. and as per instruction by engineer
incharge. (Complete job.)
17479 69-16 Providing and fixing 12 mm toughen glass partition as per drawing 9,120.00 Sq.m
8 and instruction including transport and hardware fittings ( patch
fitting, floor spring , SS handle etc. complete )
17479 69-17 Provding and fixing 12 mm toughen glass partition or paneling as 4,250.00 Sq.m
9 per drawing and instruction including transport and hardware
fittings ( Heavy duty top and bottom section necessary fitting and
filling silicon complete.
17480 69-18 Black board: Providing Black board of cement mortar 1:2 including 450.00 Sq.m
0 8 cm border & 2 coats of color primer colour type-com. Asian,
Color Code- M.B.20, matt 2504 yorder etc. complete.
17480 69-19 Picture Rail : Providing and fixing of Piuchure rail including wooden 155.00 Sq.m
1 block in wall, teak wood strips size of 8 cm x 2.5 cm, primer paint,
2 coats of oil paint of appproved company or futch polish etc
complete
17480 69-20 Grill Rolling Shutter: Providing and fixing approved iron grill rolling 3,831.00 Sq.m
2 shutter moving up and down, including both side locking system,
24 gauge cover boxes with width of 8 cm iron grill strips and
handles, Red oxide primer paint, etc. complete.
17480 69-21 Structural Glazing : Providing structural glezing using min.6mm 4,737.00 Sq.m
3 thick saint-gobain make reflective glass in any shade as per
requirement.it includes aluminium framework of rectangular
aluminium tube of size 64mm X 58mm and electro coloured to 15
microns .the aluminium extrusions is manufactured asper IS
63400.dow corning 995 silicone Structural Glazing sealant is to be
used for fixing glass with aluminium frame.high quality expansion
bolts with good load bearing capacity is to be used for fixing
aluminium frame to wall.it also includes scaffolding and other
necessary fittings.
17480 69-22 Shera Plank Cladding : Providing and fixing 8 mm thick shera 2,400.00 Sq.m
4 planks (uncoloured) directly on wall as per drawing and design
with two tone painting, scaffolding, etc. with complete job.
17480 69-23 Providing and fixing in position sliding door using readymade flush 3,235.00 Sq.m
5 door specified size with veneer finish on both side using approve
grade hardware and slider ,shutter to have teakwood lipping 6 mm
Bhavan Dept 2021-22 thk. on all sides.item
- 2021-2022 - to include
Pagemelamine
336 of 350polish to veneer as per 22/04/21 3:36
22/04/2021 - 69 approve shade,handel ,stopper,and lock Etc. complete
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
17480 70-1 Providing & Applying Chemical Waterproofing On Pcc For 332.00 Sq.m
8 Ugwt /Swimming Pool
1) Floor Treatment Before Casting :- 1a) The PCC shall be finished
smoothly and cured for 2 days…...1b) High Density Polyethylene
sheet 150 microns shall be loosely laid over the PCC surface and
overlapping with self adhesive double …...1c) side tape of
minimum 4 to 6 inches.......1d) The reinforcement for the raft shall
be tied over the High Density Polyethylene sheet laid.......
1e)Crystalline waterproofing sysytem CERA CRYSTALLINECERTE /
EQUIVALENT MAKE shall be spread over the area in qty of 1.5
kg/m2 in dry state..... 1f) Raft slab, padadi and other features to
be casted after the above treatment.
2) Surface Preparation :- 2a)After Deshuttering Complete
Cleaning of Rcc Padadi, Raft, Gutter, Core Area by Jet Machine /
Blower & wire Brush….2b) " V " Grooves ( Haunching) shall be cut
on slab & along the floor & wall joints ( 13mm x 13mm )
3) Crack Filling :- 3a) "V"Grooves will be filled with Polymer
Modified Mortar along the Periphery wall joints ( 13mm x 13mm )
Inner…...3b)"V"Grooves of the Slab will be filled with non -shrink
grout Paste ( CERAGROUT 40/EQUIVALENT MAKE + WATER-160ml
Per Bag)......3c) Dry it for 12 Hrs. before Ponding
4) Filling of Water for 1st time - 48 hrs
5) Checking :- 5a) Checking at for leakages from all Sides &
Bottom, If minor Leakage then remove the water and clean the
Sunk portion and continue the process of Waterproofing….5b) If
majour Leakage found then,- Repeat the process from Sr. no. 1,2
and 3.....5c) Socketing / Grouting with presure by using cement
slurry admixed with expanding grouting additive CERA EXPAN 250/
EQUIVALENT MAKE ( 225 gms. Per bag of cement).......5d) G. I
Nipples shall be removed after two days and the holes will be
finished with Polymer Modified Mortar......5e) Filling of Water for 48
hrs......5f) Checking at for leakages from all Sides & Bottom.....5g)
Leave 24 hrs. to get Dry
6) Crystalline Coat :- 6a) Cera Crystallinecrete / Equivalent Make
shall be mixed in the ratio of 3 Parts powder 1.5 to 2 parts of
water and shall be applied in two coats …..6b) Dosage of 1 kg/m2
( for 2 coats) over the concrete Padadi, Gutter and Raft Surface
from Inner Side Only......6c) In between 1 st and 2 coat application
there should be a time gap of 6 hrs.
7) Plastering :- 7a) The Treated Wall Area shall be Plaster ( 1 : 4 )
admixed with CERA PROOF IWP (L) /EQUIVALENT MAKE @dosage
of 200ml per bag of cement - thickness 12-15 mm
8) Base Coat :- Prepare Base Coat Mortar (Screed) ( 1: 3 : 5
Cement : Crush Sand :10mm Metal + CERAPROOF
Bhavan Dept 2021-22 IWP
- 2021-2022 -
/EQUIVALENT Pageml338
MAKE - 200 perofBag
350of Cement ),Thickness 22/04/21 3:36
22/04/2021 - 70 of Basecoat should be -Min. 20mm & Max. 40mm…....8a) Base
Coat to be done on the Floor with above Mortar with slope ( 20
mm ) on SUMP, Finish of top of Base Coat with Slope 25MM Per
3.0m Length, Pack the cores for ponding.
9) Ponding :- 9a) After Gap of 12 hrs Check whetherit has became
dry, If dried ….9b) Fill with Water ( Full tank ) for 2nd time - 3
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
Rate In (Rs)
Item Description Rate Unit
17483 71-22-H plot size above 10000 sq m -for each additional point 5,000.00 Per Job
7
71-23 Labour insurance reimbursable amount
17483 71-23-A For work upto 25 lakhs (1 % percentage is on total estimated 0.01 Percent
8 amount) age
17483 71-23-B For work above 25 lakhs (0. 5 % percentage is on total estimated 0.01 Percent
9 amount) due to technical reason instead of 0.5 % of Total age
estimated amount consider 1% on half estimated the amount
71-24 Providing and applying SD make cello coated and so finish gold
coin or coast sand metallic paint for statue with spray machine
using good quality thinner. this includes cleaning of statue with soft
polish paper, filling of small hole using paint,cleaning of paint
spilled on floor, using required height scaffolding without any
damage to statue. contractor will have to arrange electrical
connection for spray painting if required at his expenditure.
17484 71-24-1 Full size statue 4,250.00 Per No
0
17484 71-24-2 Equestrian statue (Horse Mounted Statue ) 8,500.00 Per No
1
17484 71-24-3 Half size statue 2,080.00 Per No
2
71-25 Double height MS staging
17484 71-25-1 Providing and cotructing double height MS staging for columns of 360.00 Sq.m
3 arch or slabs or beams above 3.8 m and upto 7.6m height as per
the instructions of department and the drawing of rcc consultant.it
includes all material and labour cost ,safty measures for
labours ,also includes removing of staging after completion of
work.(for measurment elevation area between two columns above
3.6m height will be considered)
17484 71-25-2 Providing and cotructing double height MS staging for slabs or 1,800.00 Sq.m
4 beams above 3.8 m and upto 7.6m height as per the instructions
of department and the drawing of rcc consultant.it includes all
material and labour cost ,safty measures for labours, also includes
removing of staging after completion of work. (for measurment
slab area will be considered)
17492 71-26 Transportation of material obtained from excavation including soil, 331.00 Cu.M
7 rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes,
channels etc. Obtained from excavation, dismantling, loading in a
Truck of minimum 5 Cu M capacity or designed capacity and
transporting within the municipal limits or any designated place,
Bhavan Dept 2021-22 - 2021-2022 - Page 343 of 350 22/04/21 3:36
unloading, stacking or spreading of material etc. complete. As
22/04/2021 - 71
directed by Engineer In charge
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
72-1 CEMENT.
17484 72-1-A Standard Consistancy, Fineness, Specific Gravity, Setting Time 3,550.00 Per Test
5 ( Initial & Final ), Compressive Strength, Soundness.
72-2 AGGREGATE.
17484 72-2-A Water Absorption, Specific Gravity,Impact Value, Crushing Value. 2,450.00 Per Test
6
17484 72-2-B Sieve Analysis. 650.00 Per Test
7
17484 72-2-C Abrasion Value. 1,100.00 Per Test
8
17484 72-2-D Flakiness Index & Elongation Index. 800.00 Per Test
9
17485 72-2-E Stripping Value. (for Bituminous Work) 700.00 Per Test
0
17485 72-2-F Soundness. 2,350.00 Per Test
1
72-3 MIX DESIGN.
17485 72-3-A GSB Mix Design./Cement Treated Sub Base 15,300.00 Per Test
2 ( CTSB)
17485 72-3-B Wet Mix Macadam Mix Design. 15,300.00 Per Test
3
72-4 FINE AGGREGATE.
17485 72-4-A Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 1,300.00 Per Test
4
17485 72-4-B Chloride & Sulphate Content. 750.00 Per Test
5
17485 72-4-C Silt Factor. 800.00 Per Test
6
72-5 BRICKS
17485 72-5-A Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 2,050.00 Per Test
7 5 Bricks), Efflorescence (Set of 5 Bricks).
72-6 FLOORING TILES (MOSSAIC / CEMENT)
Rate In (Rs)
Item Description Rate Unit
17485 72-6-A Flexural test ( Set of 6 Tiles), Water Absorption ( Set of 6 2,350.00 Per Test
8 Tiles).Resistance to wear ( Set of 6 Tiles).
17485 72-6-B Flooring of Natural Stone (Kota,Marble, Granite,Tandur.etc.) 1,300.00 Per Test
9 Water absorption, Specific gravity
72-7 CERAMIC TILES / VITRIFIED TILES
17486 72-7-A Water Absorption, Modulus of Rupture (Set of 6 Tiles) 1,500.00 Per Test
0
72-8 MANGLORE TILES
17486 72-8-A Water Absorption (Set of 6 Tiles), Flexural test (Set of 6 Tiles). 1,400.00 Per Test
1
17486 72-8-B Permeability. 900.00 Per Test
2
72-9 CONCRETE
17486 72-9-A Compressive Strength OF C.C. Cube (Set of 3 cubes). 650.00 Per Test
3
17486 72-9-B Concrete Mix Design (With all Tests on basic materials) 12,950.00 Per Test
4
17486 72-9-C Flexural strength of Beam. 700.00 Per Test
5
17486 72-9-D Permeability Test. 1,450.00 Per Test
6
72-9-E Concrete mix design by Accelerated curing method. (By
Accelerated curing method)
17486 72-9-F Taking of core samples in concrete pavement. (Excluding Dead 2,700.00 Per Test
7 Journey Charges)
17486 72-9-G Dead Journey Charges. 16.00 Km
8
72-10 CONCRETE PAVING BLOCKS
17486 72-10-A Compressive Strength , Water Absorption,(Set of 8 Blocks) 2,350.00 Per Test
9
72-11 MORTOR
17487 72-11-A Compressive Strength.( Set of 3 Cubes) 650.00 Per Test
0
72-12 STONE/ RUBBLE
Rate In (Rs)
Item Description Rate Unit
17487 72-12-A Crushing Value/Compressive Strength, Water Absorption & 1,900.00 Per Test
1 Specific Gravity,
72-13 SOIL / MURUM
17487 72-13-A Sieve Analysis. 650.00 Per Test
2
17487 72-13-B Liquid limit & plastic Limit. 1,100.00 Per Test
3
17487 72-13-C Compaction Test ( Proctor Density ). 1,750.00 Per Test
4
17487 72-13-D C.B.R. Test ( Lab ) With compaction test. 6,500.00 Per Test
5
17487 72-13-E C.B.R. Test ( Field Determination Test) Excluding 2,450.00 Per Test
6 Transportation.As per IS 2720 Part XXXI
17487 72-13-F Dead Journey Charges of inspection Vehical 16.00 Km
7
17487 72-13-G Dead Journey Charges of Truck/Tipper 58.00 Km
8
17487 72-13-H Field Density by Sand replacement method. 1,050.00 Per Test
9
17488 72-13-I Sulphate & Chloride Contents. 750.00 Per Test
0
17488 72-13-J Mechanical Analysis. 2,100.00 Per Test
1
17488 72-13-K Plate Load Bearing Test. (Excluding Transportation) 29,400.00 Per Test
2
17488 72-13-L Free Swell Test for Soil. 850.00 Per Test
3
72-14 HOLLOW / SOLID /AAC BLOCKS
17488 72-14-A Density Test . (Set of 3 Blocks ),Compressive Strength. (Set of 3 1,850.00 Per Test
4 Blocks ),Water Absorption Test ( Set of 3 Blocks )
72-15 WATER
17488 72-15-A PH Value, Sulphate & Chloride Content. 1,050.00 Per Test
5
72-16 WOOD
17488 72-16-A Density, Moisture Content. 1,000.00 Per Test
6
Bhavan Dept 2021-22 - 2021-2022 - Page 347 of 350 22/04/21 3:36
22/04/2021 - 72
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit
6
72-17 FLUSH DOOR
17488 72-17-A Knife Test, Adhesion Test, End Immersion Test. 2,550.00 Per Test
7
72-1 PLYWOOD
17488 72-1-A Determination of Resistance to dry heat,Determination of Moisture 3,200.00 Per Test
8 Content,Determination of Density,Thickness of
Plywood.
17488 72-1-B Test for Glue Adhesion 500.00 Per Test
9
72-19 PARTICAL BOARD
17489 72-19-A Determination of Moisture Content,Determination of Density 1,500.00 Per Test
0
72-20 ALUMINIUM SECTION
17489 72-20-A Thickness, Mass Per Running meter, 650.00 Per Test
1
17489 72-20-B Test on Powder Coating 750.00 Per Test
2
72-21 A.C. PIPES
17489 72-21-A Water Absorption 650.00 Per Test
3
17489 72-21-B Bursting Strength 500.00 Per Test
4
72-22 G.I. PIPES
17489 72-22-A Weight per running meter,Diameter of pipe & wall thickness 250.00 Per Test
5 of pipe
17489 72-22-B Weight of Zinc coating per sq. m. 300.00 Per Test
6
72-23 P.V.C. PIPES (NONPLASTISIZED)
17489 72-23-A Weight per running meter,Diameter of pipe & wall thickness 250.00 Per Test
7 of pipe
72-24 STEEL ANTI CORROSIVE TEST
17489 72-24-A Resistance to applied Voltage. (1 Hr. Test) (Set of 2 Bars) 1,050.00 Per Test
8
Rate In (Rs)
Item Description Rate Unit
17489 72-24-B Resistance to applied Voltage. (30 Days Test) (Set of 2 Bars) 2,950.00 Per Test
9
17490 72-24-C Thickness of Coating. (Set of 2 Bars) 550.00 Per Test
0
17490 72-24-D Chemical Resistance Test.( Set of 8 Bars ) 2,250.00 Per Test
1
17490 72-24-E Hardness of Coating Test . 300.00 Per Test
2
17490 72-24-G Salt Spray Test ( 4 Cycles ) ( Set of 2 Bars ) 1,400.00 Per Test
3
72-25 STEEL BAR TESTING
17490 72-25-A Upto 16 mm (Set of 3 Bars) 1,200.00 Per Test
4
17490 72-25-B Above 16 mm (Set of 3 Bars) 1,500.00 Per Test
5
17490 72-25-C (Tensile strength, %, Elongation, Yield Stress,Weight-Per 3,650.00 Per Test
6 Meter, Bend / Rebend Test, Proof Stress.) Nitrol Solution Test. (Set
of 3 Bars)
72-26 PAINT / THERMO-PLASTIC PAINT
17490 72-26-A Glass bead contents & grading analysis. 3,650.00 Per Test
7
17490 72-26-B Reflectance & yellowness index. 1,050.00 Per Test
8
17490 72-26-C Flowability.(Percentage residue). 1,050.00 Per Test
9
17491 72-26-D Softening Point. (Ring & ball method). 950.00 Per Test
0
17491 72-26-E Drying Time. 750.00 Per Test
1
72-27 COAL TAR EPOXY PAINT
17491 72-27-A Drying Time. 750.00 Per Test
2
17491 72-27-B Dry Film Thickness. 700.00 Per Test
3
17491 72-27-C Flexibility. 300.00 Per Test
4
Bhavan Dept 2021-22 - 2021-2022 - Page 349 of 350 22/04/21 3:36
22/04/2021 - 72
Rate Card PMC Effective Date 22/04/2021
Rate In (Rs)
Item Description Rate Unit