Professional Documents
Culture Documents
1.2KVA 12V MultiPlus 230 Volt System Example With Argo Fet and MPPT
1.2KVA 12V MultiPlus 230 Volt System Example With Argo Fet and MPPT
COLOR CONTROL GX
victron energy
ISOLATOR
BLUE POWER
victron energy
BLUE POWER
AC Input Inverting AC Loads
victron energy
0W 250W
75%
+
PV-Charger
victron energy
320W
MPPT 100 | 30
14W
DC Power
12.8V 1.1A -45W
CCGX POWER + V+
name
CCGX POWER - GND
! i
0 OFF 0 OFF
Absorbtion
Float
Bulk
color control BATTERY PV
Charge light
MAIN DC DISTRIBUTION + - - +
VE-direct-1
VE-direct-2
VE BUS-1
ETHERNET
VE-direct
VRM
IGNITION
WORLD FUSE
MEGA xx AMP.
xxxA Load+
OFF 15 30
MAIN SWITCH-1
MEGA
xxxA Load+
m ON
ARGOFET BATTERY ISOLATOR ALTERNATOR
ENGINE SYSTEM
MEGA
100A Argo Fet Out-2+
AMI
PRE-MAIN-FUSE 100A
CCGX-1A FUSE
INTERNAL
ANL ALTERNATOR
40 AMPERE
250A
D+
285040F
victron energy
BLUE POWER
B+ B-
BMV-100mA FUSE MPPT+
www.victronenergy.com
30 FROM STARTER+(30)
OFF
STARTER
ENERGIZE OUTPUT-2 OUTPUT-1 INPUT GROUND MOTOR
ALTERNATOR
100A 2 Output 200A 2 Output
MEGA BMV-B2 / 100mA FUSE
m ON Multiplus Batt + ARGOFET Battery Isolator
175A 100A 3 Output 200A 3 Output
31 MAIN SWITCH-3
Charger Starter Battery 3A FUSE
12V-80A
MAIN SWITCH-2 OFF
MAIN V
MULTIPLUS 1200VA/12V DC/230V AC
VE-direct
SETUP SELECT INVERTER/CHARGER
STARTER BATTERY
victron energy
BLUE POWER AGM 12-100
SUPPLIED UTP CABLE AGM Super Cycle Battery
Load-
Bx
T Bx
T
test regularly test regularly
Load- Inverter
0 0 OFF 0 OFF 0 0 OFF 0 OFF
Alarm
earth fault indicator earth fault indicator victron energy
BLUE POWER
Multiplus Case GR 2 N 2 N
Recommended AC Out cable/breaker size MultiPlus Recommended DC cable/fuse size MultiPlus Recommended AC In cable/breaker size MultiPlus WARNING
With Power assist the MultiPlus can add 0-5 m cable length: 35SQmm AC IN must be protected by a circuit 230 VOLT IS EXTREMELY HAZARDOUS
1 KW to the output load when needed. Cable length stands for the total distance between breaker rated at 16A max or less. DO NOT TOUCH ANY LIVE WIRED
Together with the adjustable 16A input this the battery connections plus and minus and the This depends heavily on the size of the PARTS OF THE INSTALLATION !
all adds up to the max sum of input and MultiPlus connections ! Recommendations are connected power source.The input current WHEN IN DOUBT, ALWAYS CONSULT
output current of 16+4.3=20.3A. An Earth without other loads in the system and these also must be adjusted to fit the size of the YOUR VICTRON DEALER !
leakage with breaker or a combination should be taken into account for proper main connected power source.
MCB/RCD must be installed on the output. battery, main fuse & main switch cables ! The breaker and cable size for AC IN
Cable size must be adjusted accordingly. INTERNAL Fuse size should be 200A. should be adjusted accordingly.