Professional Documents
Culture Documents
2. Top stator bar long pushed, 2 2510520011- 05 suitable for unit no. 2 6 nos.
3. Bottom stator bar short pushed , 2 2510520011- 04 suitable for unit no. 2 6 nos
4. Top stator bar short pushed, 2 2510520011-03 Suitable for unit no. 2 6 nos.
5. Bottom stator bar normal, 2 2510520011-02 suitable for unit no. 2 60 nos.
6. Top stator bar normal, 2 2510520011-01 suitable for unit no. 2 140 nos.
8. HS lubrication system with AC motor & pump complete in all respect, drg. no., 2 sets
32550501400(Rev. 04)
9. Rotor Fan locking items as per Annexure-A2 1 set
a) F- class field coil assembly as per drg. no.02530220012-03 suitable for Unit no.2 & 6 nos.
4
b) Rotor lead assembly suitable for Unit no.1 to 4 complete in all respects including 2 sets
collector to spider inside shaft & spider to poles (drg. no. H-3005221)
c) Rotor lead assembly suitable for Unit no.5 (Fixing specification shall be as per new 1 set
shaft procured vide PO 553/PHD/Dehar/383 dated 27.04.2011) complete in all
respect including collector to spider inside shaft & spider to poles, drg. no.
H-3005420
11. Motor pump set for LP lubricating system as per drg. no. G-3017812-3 1 no.
1
Annexure-AI
10. Epoxy Glass Texolite Under Wedge Packer (800 x 200 nos.
19.7 x 0.5 mm)
11. Epoxy Glass Texolite Under Wedge Packer (800 x 200 nos.
19.7 x 0.8 mm)
12. Epoxy Glass Separator (800 x 710 x 3 mm) 60 nos.
2
Annexure-A2
LIST OF ITEMS FOR ROTOR FAN LOCKING
1. 1 1/2'' BSW x 4 3/4'' lg. hex. hd. S. Screw - 4 nos as per drg. no. 4 nos.
D3402048 (2) for Bottom Fan
2. 1 1/2'' BSW x 4 3/4'' lg. hex. hd. S. Screw - 4 nos as per drg. no. 4 nos.
D3402048 (1) for Top Fan
3. Clamp Bush (top) as per drawing no. D 3276444(1) 4 nos.
4. Clamp Bush (Bottom) as per drawing no. D 3276444(2) 4 nos.
5. Locking Plate as per drawing no. B3402048 8 nos.
3
4