Professional Documents
Culture Documents
Smart Guide
Smart Guide
1 0 1 1 0 a GENERAL INDEX
www.SystemPlastSmartGuide.com
7 3 7 0 0 a
Wear strips
5 0 5 1 0 a
Miscellaneous
products
5 4 5 1 0 a
Curves & tracks
5 0 0 0 5 a
Frame &
structure supports
5 4 0 1 0 a
Side guide brackets
& accessories
5 3 5 1 0 a
Side guide
solutions
5 1 5 1 0 a
Roller guide
solutions
5 2 5 1 0 a
Bearings
5 6 0 1 0 a
Levelers Equipment
5 5 5 1 0 a 5 7 0 1 0 a
Chains & belts Chains
return system & sprockets
Roller transfer
5 1 0 1 0 a 1 1 0 1 0 a
Modular belts
modules & sprockets
5 2 6 7 0 a 3 0 0 1 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
MISCELLANEOUS PRODUCTS
Index miscellaneous products................................................ 54510a
CHAINS & SPROCKETS
Index metal chains & sprockets.............................................. 11010a
Index straight thermoplastic chains & sprockets..................... 11011a
Index sideflexing thermoplastic chains & sprockets................ 11012a
Index other types sideflexing chains & sprockets................... 11013a LEVELERS
Index levelers & tube ends..................................................... 55510a
WEAR STRIPS
ITEM DESCRIPTION INDEX
Index wear strips..................................................................... 50510a
Item description index............................................................. 78000a
e Co
nanc nstr
e
ucti
Maint
on
ALL
App
als
cat
M at
e ri
io n
li
Related information:
• Construction details
• Applications
• Inspections and maintenance
• Materials and calculations
Our interactive catalog is your key to direct access to the System Plast® SmartGuide® website, where you will find all possible information and tools to assist
you in selecting, applying our products
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 0 1 1 0 d LEGEND ICONS
www.SystemPlastSmartGuide.com
e Co Weight in Kg/m
nanc nstr
Link to open menu for technical
e
ucti
Maint
ALL
listed on this page.
App
als
cat
M at
e ri
io n
li
PATENTED
Wrench size.
This product includes patented features.
PATENTED
STRAIGHT SIDEFLEXING
1 1 0 2 0 a 1 1 1 5 0 a 1 1 0 6 0 a 1 1 1 6 0 a
812 - 815 - 815L 815VG - 815 VG TAB 881M -881MO 881 MO VG
1 1 0 4 0 a 1 1 0 4 0 b 1 1 0 4 0 a 1 1 0 9 0 a
1 1 1 2 0 a 1 1 1 5 0 a 1 1 0 7 0 a 1 1 1 6 0 a
800 - 802 - 805 814 VG 881R TAB - 881O TAB 8857 M VG
1 1 1 2 0 a 1 1 3 3 0 a 1 1 0 9 0 a 1 1 1 0 0 a
1 1 1 0 0 a 1 1 1 8 0 a 1 1 0 8 0 a 1 1 1 7 0 a
8157 8157 VG - 8157 TAB VG 881O 881 VG - 881 TAB VG
1 1 1 0 0 a 1 1 1 0 0 a 1 1 0 9 0 a 1 1 0 4 0 b
1 1 1 3 0 a 1 1 1 8 0 a 1 1 1 1 0 a
515 805 VG 8857 TAB - 8857M
1 1 1 3 0 a 1 1 1 2 0 a 1 1 1 0 0 a
Index
1 1 0 1 1 a Straight running thermoplastic chains
Index 1 1 1 4 0 a 1 1 4 5 0 a
1 1 0 1 2 a Sideflexing thermoplastic chains 1874 1874 GV
STRAIGHT
1 1 1 9 0 a 1 1 4 6 0 a 1 1 3 8 0 a 1 1 3 4 0 a
820 - 820P - 831 843 - 845 831 VG LBP 831
1 1 2 0 0 a 1 1 2 0 0 a 1 1 2 0 0 a
1 1 2 1 0 a 1 1 4 6 0 a 1 1 4 1 0 a 1 1 3 7 0 a
828 863 8257 VG LBP 8257
1 1 2 6 0 a 1 1 3 0 0 a 1 1 3 0 0 a
1 1 3 1 0 a 1 1 4 1 0 a 1 1 3 7 0 a
8257 821 VG LBP 821
1 1 3 0 0 a 1 1 3 2 0 b 1 1 3 2 0 b
1 1 3 2 0 a
821
1 1 3 2 0 b
1 1 3 3 0 a
SK 38
1 1 3 3 0 a
Information about this product is only available on FOR OTHER TYPES OF CHAIN GO TO:
our Smart Guide® website.
Index
1 1 0 1 0 a Metal chains
Index
1 1 0 1 2 a Sideflexing thermoplastic chains
SIDEFLEXING
1 1 2 2 0 a 1 1 4 7 0 a 1 1 3 8 0 a 1 1 4 3 0 a
879M - 880M 1843 TAB 879 M VG 878 TAB GS
1 1 2 6 0 a 1 1 2 6 0 b 1 1 2 6 0 a
1 1 2 3 0 a 1 1 4 7 0 a 1 1 3 9 0 a 1 1 4 4 0 a
877TAB - 878TAB
879TAB - 880TAB 1873 TAB 878 TAB VG - 879 TAB VG 1873 TAB GS
1 1 2 6 0 a 1 1 2 6 0 a
1 1 2 4 0 a 1 1 4 9 0 a 1 1 4 0 0 a
879 - 880 1863 TAB 882 M VG - 882 TAB VG LBP
1 1 2 6 0 a 1 1 3 0 0 a
1 1 2 4 0 b 1 1 4 2 0 a 1 1 3 5 0 a
8800P 1873 TAB VG LBP 878 TAB
VACUUM 1 1 2 6 0 a
1 1 2 6 0 a
1 1 2 8 0 a 1 1 2 3 5 a 1 1 4 2 5 a 1 1 3 5 0 a
882M 880TAB - VACUUM 1873 TAB VG - NECK STERILIZER LBP 879 M
1 1 3 0 0 a 1 1 2 6 0 a 1 1 2 6 0 a
1 1 2 9 0 a 1 1 3 6 0 a
FOR OTHER TYPES OF CHAIN GO TO:
882 BEVEL - 882 TAB LBP 882 M - LBP 882 TAB
1 1 3 0 0 a Index 1 1 3 0 0 a
1 1 0 1 0 a Metal chains
Index
1 1 0 1 1 a Straight running thermoplastic chains
Information about this product
is only available on our
Revision 001
SIDEFLEXING
1 1 5 3 0 a 1 1 5 7 0 a 1 1 5 9 0 a
1700 - 1702 - 1701 TAB CC 600 - CC 600 TAB CC 1400 - CC 1400 TAB
1 1 5 5 0 a 1 1 5 8 0 a 1 1 5 9 0 a
SAFETY CHAIN
1 1 5 3 0 a 1 1 5 7 0 a 1 1 5 9 0 a
1706 CC 600 P - CC 600 TAB P CC 1431 TAB
1 1 5 5 0 a 1 1 5 8 0 a 1 1 5 9 0 a
1 1 5 4 0 a 1 1 5 8 0 a 1 1 6 0 0 a
CC 600 F CC 1400V
1710 - 1710C TAB
CC 631 TAB CC 1400V TAB
1 1 5 5 0 a 1 1 5 8 0 a 1 1 6 0 0 a
Index
1 1 0 1 0 a Metal chains
Index
1 1 0 1 1 a Straight running thermoplastic chains
Index
1 1 0 1 2 a Sideflexing thermoplastic chains
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 0 2 0 a 815L
www.SystemPlastSmartGuide.com (SPEED-LINE) STRAIGHT RUNNING CHAINS - STAINLESS STEEL
e Co
nanc nstr
ucti
Maint
on
ALL
11020a
App
als
cat
M at
e ri
io n
li
RD
(0.26 in)
(0.12 in)
6,6 mm
3,1 mm
(0.39 in)
9,8 mm
38,1 mm
(1.5 in)
HIGH PERFORMANCE
EXTENDED LIFE 42,1 mm Ø 6,35 mm
(1.66 in) (Ø 0.25 in)
G
44 mm
(1.73 in)
L
Total
flatness
TRAVEL
Smallest
possible gap
Optimized hinge
Improved shape-calibrated hole
chamfered
edges around the
entire top plate
EXTRA PLUS HB
Information about this
product is only available on Vacuum hardened
our Smart Guide® website. stainless steel pins
Improved chamfered
edges around the entire page code:
bottom of the plate
1 1 0 4 0 a 7 3 5 6 0 a
Extra plus HB
SPSL815-K330HB 83,8 3 19∕64
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 0 3 0 a 812 - 815
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS - FERRITIC STAINLESS STEEL
e Co
nanc nstr
ucti
Maint
on
ALL
11030a
App
als
cat
M at
e ri
io n
li
RD
(0.12 in)
(0.26 in)
3,1 mm
6,6 mm
(0.39 in)
38,1 mm
9,8 mm
(1.5 in)
42,1 mm Ø 6,35 mm
(1.66 in) (Ø 0.25 in)
44 mm G
(1.73 in)
L
TRAVEL
EXTRA PLUS HB
Vacuum hardened
stainless steel pins
page
code: 7 3 5 6 0 a
Information about this
product is only available on
1 1 0 4 0 a our Smart Guide® website.
Advantages:
• Complete program to cover all applications
For chains with further improved characteristics: 1 1 0 2 0 a
• All materials For versions in austenitic and carbon steel material: 1 1 0 3 0 b
• All sizes
0,3 0.012
SSE815-K750HB 190,5 7 1/2 5,1 3.4
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 0 3 0 b 815
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS - CARBON STEEL AND AUSTENITIC STAINLESS STEEL
e Co
nanc nstr
ucti
Maint
on
RD ALL
11030b
(0.12 in)
(0.26 in)
3,1 mm
6,6 mm
App
als
(0.39 in)
38,1 mm
9,8 mm
cat
M at
e ri
io n
li
(1.5 in)
42,1 mm Ø 6,35 mm
(1.66 in) (Ø 0.25 in)
44 mm G Min. order quantity: 100 m.
(1.73 in)
1 1 0 4 0 a
L
Advantages:
• Complete program See also the chains:
to cover all applications
• All materials TRAVEL
1 1 0 2 0 a
• All sizes
1 1 0 3 0 a
MAX. WORKING LOAD FINISH FLATNESS (MAX) POLISHED WIDTH L G RD WEIGHT
ITEM DESCRIPTION MATERIAL
N lbs μm mm in HINGES mm in mm in mm in Kg/m lbs/ft.
S815-K325 82,5 3 1/4 2,6 1.7
S815-K350 88,9 3 1/2 2,7 1.8
S815-K450 C 45 12000 2700 - - - no 114,3 4 1/2 1,8 0.07 150 5.9 3,3 2.2
S815-K600 152,4 6 4,2 2.8
S815-K750 190,5 7 1/2 5,1 3.4
SSA815-K325 82,5 3 1/4 2,6 1.7
SSA815-K330 0,15 0.006 83,8 3 19∕64 2,6 1.7
SSA815-K350 88,9 3 1/2 2,7 1.8
Austenitic 5300 1190 0,3 no 1,8 0.07 150 5.9
SSA815-K450 114,3 4 1/2 3,3 2.2
SSA815-K600 0,2 0.008 152,4 6 4,2 2.8
SSA815-K750 190,5 7 1/2 5,1 3.4
Standard length: 80 pitches (3,048 m - 10 ft.) Breaking load according to standard ISO 4348 - DIN 8153
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 0 4 0 a M10 38 mm 44 mm
DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR CHAINS 812 - 815 (VG) - 881 (M-MO)
S+ 1
+0
e Co
nanc nstr
ucti
Maint
on
ALL
Ø OD
11040a
Features:
App
als
• Split versions: quick and easy replacement. cat
M at
e ri
io n
li
• Foolproof design.
• Excellent wear and chemical resistance.
• Recyclable.
DF
50 mm
38 mm 47,2 mm
S+ 1
+0
Ø OD
DF
53 mm
1 1 0 4 0 b 1 1 0 5 0 a
1 1 0 5 0 b 1 1 0 9 0 c
For machined sprockets
with flanges, go to: See also the chains:
1 1 0 9 0 d
812-815
1 1 0 2 0 a 1 1 0 3 0 a 1 1 0 3 0 b
Information about this 815 VG
product is only available on 1 1 1 5 0 a
our Smart Guide® website.
881M - 881MO
1 1 0 6 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
3 0 9 9 0 a
on
ALL
11040b
App
als
Features: cat
M at
e ri
io n
li
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance. For machined sprockets
• Recyclable. with flanges, go to:
1 1 0 9 0 d
38 mm S+ 1
+0
Ø OD ØP S
Z mm mm mm
17 103,9 105,47 55,9
Ø OD
ØP
19 117 117,34 61,9
21 129 129,26 67,8
23 142 141,21 73,8
25 154 153,21 79,8
27 166,8 165,20 85,8
29 178,5 177,24 91,8
DF 41,3 mm
881M - 881MO
1 1 0 6 0 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 0 5 0 a IDLER WHEELS
www.SystemPlastSmartGuide.com FOR CHAINS 812 - 815 (VG) - 820 - 828 - 831 (LBP) - 881 (M-MO)
e Co
nanc nstr
ucti
Maint
See also the chains:
on
Features: ALL
11050a
App
• Split versions: quick and easy replacement.
als
cat
M at
e ri
• Excellent wear and chemical resistance. io n
li
• Recyclable.
812-815 881M - 881MO
1 1 0 2 0 a 1 1 0 6 0 a
1 1 0 3 0 a 820 -820P - 831
1 1 0 3 0 b 1 1 1 9 0 a
828
Information about this LBP 831
product is only available on 1 1 3 4 0 a 1 1 2 1 0 a
our Smart Guide® website.
1 1 0 5 0 b 1 1 0 4 0 b
38 mm A1
1 1 0 9 0 c
S+ 1
+0
Ø 25 Ø 30 Ø 35 Ø 40
Z
ITEM DESCRIPTION
15 - 820-15R30M-W 820-15R35M-W 820-15R40M-W
A2
DF A3 17 820-17R25M-W 820-17R30M-W - -
19 820-19R25M-W 820-19R30M-W 820-19R35M-W 820-19R40M-W
38 mm A1
MOLDED IDLER WHEELS - SPLIT
FLOATING
21 820-21R25M-WS 820-21R30M-WS 820-21R35M-WS 820-21R40M-WS
S+ 1
+0
Material: reinforced polyamide (black); screws in stainless steel, nuts in stainless steel.
A2
DF A3
Ø OD S A1 A2 A3
Z mm mm mm mm mm
SELF-LUBE BUSHING 15 90 48,2 48 82 82
17 106 56,2 44 52 52
19 117 62,6 44 52 58
21 129,8 68,6 44 57 61
23 142,2 74,6 44 57 61
Features:
25 154,7 80,5 44 57 61 • Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
Ø 25 Ø 30 Ø 35 Ø 40
S+ 1
+0
Z
ITEM DESCRIPTION
21 820-21R25M-WL 820-21R30M-WL 820-21R35M-WL 820-21R40M-WL
Ø OD
DF 59 mm
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
11050b
App
als
cat
M at
e ri
io n
li
New design
3 0 9 9 0 a
Features:
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable. 38 mm 45 mm
S+ 1
+0
Ø OD
Ø OD S
Z mm mm
17 104 56,2
19 117 62,6
21 129,8 68,6
DF 61 mm 23 142,2 74,6
25 154,7 80,5
38 mm 45 mm
Ø 20 Ø 25 Ø 30 Ø 35 Ø 40
Z
Ø OD
ITEM DESCRIPTION
17 820-17R20M-WMS 820-17R25M-WMS 820-17R30M-WMS 820-17R35M-WMS 820-17R40M-WMS
19 820-19R20M-WMS 820-19R25M-WMS 820-19R30M-WMS 820-19R35M-WMS 820-19R40M-WMS
21 820-21R20M-WMS 820-21R25M-WMS 820-21R30M-WMS 820-21R35M-WMS 820-21R40M-WMS
23 820-23R20M-WMS 820-23R25M-WMS 820-23R30M-WMS 820-23R35M-WMS 820-23R40M-WMS
25 820-25R20M-WMS 820-25R25M-WMSDF 61 mm
820-25R30M-WMS 820-25R35M-WMS 820-25R40M-WMS
1 1 0 6 0 a 881M - 881MO
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM
e Co
nanc nstr
ucti
Maint
on
ALL
11060a
App
45 mm RD = 80 mm
als
cat
M at
e ri
io n
li
(1.77 in)
(0.26 in)
(RD = 3.15 in)
(0.12 in)
13,5 mm
6,6 mm
3,1 mm
(0.53 in)
(0.39 in)
9,8 mm
42,1 mm 38,1 mm
(1.66 in) (1.5 in)
(1.06 in)
27 mm
Ø 6,35 mm
(Ø 0.25 in)
R.
Characteristics:
• The chains series 881 M and 8857 M are securely retained in the curve by Other versions 881MO:
TRAVEL
magnets located under the hinge of the chain in the upper part of curve. As VG
there are no TAB or BEVEL shoes on these chains they can be easily removed Rubber top
from the curve for maintenance or for cleaning, without dismantling the chain.
• The enlarged surface of our 881 MO series offers improved product support
compared to the 881 M series.
11160a
Advantages:
• Optimum flatness of chains in curves
• Less power consumption
• For high speed lines 5 0 0 1 0 a
• Best product transfer along as well as across the running direction Information about this
• All advantages of the magnetic system product is only available on
our Smart Guide® website.
• The best choice for the most demanding applications, like
pressureless combiners and high speed applications
1 1 0 4 0 a
• Improved flatness
• Optimum product stability EXTRA PLUS HB
ucti
Maint
on
ALL
11070a
App
als
cat
M at
e ri
io n
li
RD = 80 mm
(0.12 in)
19,4 mm
3,1 mm
(0.76 in)
6,6 mm
(0.26 in)
(RD = 3.15 in)
12,7 mm 43 mm
(0.5 in)
38,1 mm Ø 6,35 mm
(1.7 in)
45 mm (1.5 in) (Ø 0.25 in)
(1.77 in)
56,2 mm
(2.21 in)
R.
R.
TRAVEL TRAVEL
SSE881RTAB-K325 EXTRA 4850 1090 0,6 82,5 3 1/4 200 7.9 3,0 2.0
1 1 0 8 0 a 881O
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS BEVEL SYSTEM
e Co
nanc nstr
ucti
Maint
on
ALL
11080a
App
als
cat
M at
e ri
io n
li
RD = 80 mm
3,1 mm
(0.12 in)
(0.26 in)
6,6 mm
9,8 mm
(0.39 in)
SC (RD = 3.15 in)
8°
11,2 mm
(0.44 in)
38,1 mm Ø 6,35 mm
43 mm (1.5 in) (Ø 0.25 in)
(1.7 in)
R.
TRAVEL
11170a
our Smart Guide® website. 5 0 1 3 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
• Foolproof design.
on
881 MO VG ALL
11090a
App
1 1 1 6 0 a 1 1 0 9 0 b
als
• Recyclable. cat
M at
e ri
io n
li
881R TAB - 881O TAB
1 1 0 7 0 a 1 1 0 9 0 c
881O
1 1 0 8 0 a
Information about this
product is only available on
our Smart Guide® website.
New design Ø OD ØP ØM S
Z
38 mm 31 mm mm mm mm mm
3 0 9 9 0 a
17 103,9 105,47 70 55,9
Features: 19 117 117,34 70 61,9
S+ 1
+0
DF 41,3 mm
1 1 0 9 0 b IDLER WHEELS
www.SystemPlastSmartGuide.com FOR CHAINS 815VG TAB - 881R TAB - 881O TAB - 8157 - 8857M
e Co
nanc nstr
Features:
ucti
Maint
on
• Completely closed structure, easy to clean ALL
11090b
App
and to disinfect.
als
cat
M at
e ri
io n
li
• Excellent wear and chemical resistance. 38 mm A
• Recyclable.
Ø OD S
Z
S+ 1
+0
mm mm
17 104,0 56,2
19 117,0 62,6
Ø OD
21 129,8 68,6
23 142,2 74,6
25 154,7 80,5
27 167,2 86,5
29 179,3 92,8
DF B
815 VG TAB
1 1 1 5 0 a
Ø OD
8257
1 1 3 1 0 a
Information about this
product is only available on
our Smart Guide® website.
DF B
1 1 0 9 0 c IDLER WHEELS
www.SystemPlastSmartGuide.com FOR CHAINS 881O - 881MO VG
e Co
nanc nstr
ucti
Maint
on
Features: ALL
11090c
App
als
• Completely closed structure, easy to clean cat
M at
e ri
io n
li
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
38 mm A
S+ 1
+0
Ø OD
DF B
1 1 0 9 0 a
881O
1 1 0 8 0 a
881 MO VG
1 1 1 6 0 a
1 1 0 9 0 d DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR CHAINS 812 - 815 (VG) - 881 (M-MO)
e Co
STAINLESS STEEL nanc nstr
e
GUIDE RINGS
ucti
Maint
on
ALL
11090d
App
als
cat
M at
e ri
io n
li
STAINLESS STEEL PLASTIC
GUIDE RINGS GUIDE RINGS
48,6 mm 47,3 mm
38 mm 3,65 mm 383,65
mm mm 3 mm 3 mm
1,5 mm
New design
S+ 1
+0
S+ 1
+0
3 0 9 9 0 a
Features:
Ø Fixing screws
Ø Fixing screws
• Very high strength.
Ø Inside
Ø OD
Ø OD
• Split versions: quick and easy replacement.
ØP
ØP
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
DF DF41,3 mm 41,3 mm
Ø OD ØP S
Z mm mm mm
21 129 129,26 67,8
23 142 141,21 73,8
25 154 153,21 79,8
See also the chains: See also the sprockets and idler wheels:
1 1 1 0 0 a 8157
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS HEAVY DUTY SINGLE HINGE
e Co
nanc nstr
ucti
Maint
RD
on
ALL
11100a
(0.26 in)
6,6 mm
(0.12 in)
3,1 mm
(0.39 in)
9,8 mm
App
38,1 mm
als
cat
M at
e ri
(1.50 in) io n
li
57 mm Ø 6,35 mm Other versions 8157:
(2.24 in) (Ø 0.25 in)
59 mm VG
G Rubber top
(2.32 in)
11180a
EXTRA PLUS HB
Vacuum hardened
L
stainless steel pins
page code:
7 3 5 6 0 a
Advantages:
• High strength TRAVEL
• Helps standardising your conveyor constructions.
• Same hinge width available in many chain types, both steel and plastic; also LBP.
chains and rubber top chains.
MAX. WORKING LOAD FINISH WIDTH L G RD WEIGHT
ITEM DESCRIPTION MATERIAL
N lbs μm mm in mm in mm in Kg/m lbs/ft.
SSE8157-K750 Extra plus
10400 2340 0,3 190,5 7 1/2 1,8 0.07 150 5.9 5,6 3.8
SSE8157-K750HB Extra plus HB
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
DRIVE SPROCKETS
FOR CHAINS 8157 - 8857M - 8857M VG - 8157VG - 8157TAB VG
38 mm
S+ 1
+0
8857 M VG
New design
3 0 9 9 0 a 1 1 1 6 0 a
8157VG
Features:
• Very high strength.
DF 57 mm
1 1 1 8 0 a
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean For machined sprockets
and to disinfect. with flanges, go to:
• Excellent wear and chemical resistance. 1 1 1 0 0 b
• Recyclable.
1 1 1 0 0 b DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR CHAINS 8157 - 8857M
e Co
STAINLESS STEEL nanc nstr
e
GUIDE RINGS
ucti
Maint
on
ALL
11100b
App
als
cat
M at
e ri
io n
li
STAINLESS STEEL PLASTIC
New design GUIDE RINGS GUIDE RINGS
64,3 mm 63 mm
3 0 9 9 0 a
38 mm 3,65 mm 38 mmmm
3,65 3 mm 3 mm
Features: 1,5 mm
• Very high strength.
S+ 1
+0
S+ 1
+0
• Split versions: quick and easy replacement.
• Foolproof design.
Ø Fixing screws
• Completely closed structure, easy to clean
Ø Fixing screws
Ø Inside
and to disinfect.
Ø Inside
Ø OD
Ø OD
ØP
ØP
• Excellent wear and chemical resistance.
• Recyclable.
Ø
Ø OD ØP S Ø
Z FIXING
mm mm mm INSIDE SCREWS
21 129 129,26 67,8 79 104
DF 57 mm DF 57 mm
23 142 141,21 73,8 92 116
25 154 153,21 79,8 104 128
PLASTIC
GUIDE RINGS
1 1 1 1 0 a 8857 TAB
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS HEAVY DUTY
e Co
nanc nstr
ucti
Maint
on
ALL
11110a
App
als
cat
M at
e ri
io n
li
18,8 mm
(0.12 in)
(0.74 in)
3,1 mm
(0.26 in)
RD = 150 mm
6,6 mm
(0.39 in)
9,8 mm
(RD = 5.9 in)
58 mm 38,1 mm Ø 6,35 mm
12,7 mm
(0.5 in)
EXTRA PLUS HB
L
Vacuum hardened
stainless steel pins
R.
page code:
7 3 5 6 0 a
TRAVEL
Advantages: 1 1 0 4 0 b
High strength
8857M
SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM HEAVY DUTY
60 mm
(2.36 in) (0.26 in)
6,6 mm
RD = 150 mm
(0.12 in)
(0.67 in)
3,1 mm
17 mm
57 mm
(0.39 in)
9,8 mm
38,1 mm Ø 6,35 mm
(1.5 in) (Ø 0.25 in)
EXTRA PLUS HB
Vacuum hardened
stainless steel pins Other versions 8857M:
L
Advantages: 11160a
K 134
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 1 2 0 a 802 - 805
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS DOUBLE HINGE
e Co
nanc nstr
ucti
Maint
on
RD
ALL
11120a
(0.26 in)
(0.12 in)
6,6 mm
App
(0.39 in)
3,1 mm
als
9,8 mm
38,1 mm cat
M at
e ri
io n
li
(1.5 in)
80,5 mm Ø 6,35 mm
(3.17 in) G (Ø 0.25 in) Other versions 805:
82,5mm
VG
(3.25 in)
Rubber top
L
stainless steel pins
page code:
Min. order quantity: 18 m.
7 3 5 6 0 a Information about this
product is only available on
Advantages: TRAVEL our Smart Guide® website.
• Very high strength.
• For heavy duty applications.
SR800-K750 C45 28000 6300 not applicable 2,8 0.11 75 2.9 5,7 3.8
SSA805-K750 Austenitic 9600 2160 1,8 0.07 150 5.9 5,8 3.9
SSE805-K750 190,5 7 1/2 1,8 0.07 150 5.9 5,8 3.9
Extra plus 15000 3370 0,3
SSER805-K750 2,8 0.11 75 2.9 5,7 3.8
SSE805-K750HB Extra plus HB 15000 3370 1,8 0.07 150 5.9 5,8 3.9
Standard length: 80 pitches (3,048 m - 10 ft.) Breaking load according to standard ISO 4348 - DIN 8153
Features:
• Very high strength.
Ø OD
ØP
1 1 1 2 0 b DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR CHAINS 800 - 802 - 805 (VG)
STAINLESS STEEL PLASTIC e Co
GUIDE RINGS GUIDE RINGS nanc nstr
ucti
Maint
87,3 mm 86 mm
on
New design 3,65 mm
ALL
11120b
38 mm 38 mm 3,65 mm 3 mm 3 mm
App
als
1,5 mm
3 0 9 9 0 a cat
M at
e ri
io n
li
S+ 1
+0
S+ 1
+0
Features:
• Very high strength.
Ø Fixing screws
Ø Fixing screws
• Split versions: quick and easy replacement.
Ø Inside
Ø OD
Ø OD
• Foolproof design.
ØP
ØP
• Completely closed structure, easy to clean and
to disinfect. Information about this
• Excellent wear and chemical resistance. product is only available on
• Recyclable. our Smart Guide® website.
DF 80 mm
DF 80 mm
IDLER WHEELS
FOR CHAINS 800 - 802 - 805 - 805VG
New design 38 mm 85 mm
3 0 9 9 0 a
S+1
+0
Features:
• Very high strength.
• Split versions: quick and easy replacement. See also the chains:
Ø OD
• Foolproof design.
• Completely closed structure, easy to clean and
1 1 1 2 0 a
to disinfect.
• Excellent wear and chemical resistance. See also the sprockets:
• Recyclable.
DF
100 mm
1 1 1 2 0 a
MACHINED IDLER WHEELS - SPLIT
Ø 30 Ø 35 Ø 40 Ø OD S
Z Z
ITEM DESCRIPTION mm mm
19 800-19R30M-WMS 800-19R35M-WMS 800-19R40M-WMS 19 117 62,6
21 800-21R30M-WMS 800-21R35M-WMS 800-21R40M-WMS 21 129,8 68,6
Revision 001
1 1 1 3 0 a 515
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS SINGLE HINGE (PITCH 1” - 25,4 mm)
e Co
nanc nstr
(0.12 in)
ucti
3,1 mm
Maint
(0.26 in)
(0.39 in)
6,6 mm
9,8 mm
on
RD ALL
11130a
App
als
cat
M at
e ri
io n
li
42,1 mm 25,4 mm Ø 6,35 mm
(1.66 in) (Ø 0.25 in)
(1 in)
44 mm G
(1.73 in)
L
TRAVEL
Advantages:
• Small pitch offering short product transfers.
Ø OD
ØP
DF 43,5 mm
New design
MACHINED DRIVE SPROCKETS - SPLIT 3 0 9 9 0 a
FIXED Features:
Ø 23* Ø 30 Ø 40 • Very high strength.
Z • Split versions: quick and easy replacement.
ITEM DESCRIPTION
• Foolproof design.
13 - 515-13R30M-DMS 515-13R40M-DMS • Completely closed structure, easy to clean and
15 - 515-15R30M-DMS 515-15R40M-DMS to disinfect.
18 - 515-18R30M-DMS 515-18R40M-DMS • Excellent wear and chemical resistance.
19 - 515-19R30M-DMS 515-19R40M-DMS • Recyclable.
21 - 515-21R30M-DMS 515-21R40M-DMS
Ø OD ØP S
MACHINED RETURN SPROCKETS -SPLIT Z mm mm mm
1 1 1 4 0 a 1874
www.SystemPlastSmartGuide.com SIDEFLEXING PLATE TOP CHAINS WITH BASE ROLLER CHAINS
(PITCH ¾” - 19,05 mm)
e Co
nanc nstr
ucti
Maint
on
ALL
11140a
App
als
cat
M at
e ri
io n
li
RD = 260 mm
(0.12 in)
3,1 mm
(0.83 in)
21 mm
(0.75 in)
(RD = 10.23 in)
19 mm
14,7 mm
(0.58 in)
31,8 mm Ø 5,08 mm
23,8 mm
19,05 mm 19,05 mm
(0.94 in)
12,7 mm
(0.5 in)
L
Advantages:
• High speed
R.
• Very high loads
• Longer conveyors
• Flights removeable TRAVEL
• Lower noise
• No chain elongation 5 0 1 6 0 a
MATERIAL MAX. WORKING LOAD FINISH WIDTH L R MIN. WEIGHT
ITEM DESCRIPTION
PLATE ROLLER CHAIN N lbs μm mm in mm in Kg/m lbs/ft.
1874TAB-K325 C45 C45 27000 6080
1874SS-TAB-K325 Austenitic 21000 4730 0,6 82,5 3 1/4 380 15 4,2 2.8
EXTRA
1874A-TAB-K325 C45 27000 6080
Standard length: 160 pitches (10 ft. - 3,048 m) - 80 Flights Breaking load according to standard ISO 4348 - DIN 8153
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
Characteristics: ALL
11150a
App
Flat top chains with vulcanized NBR rubber.
als
cat
M at
e ri
io n
li
Tabs reduce friction on the return section of the conveyor.
RD
(0.12 in)
15,9 mm
Other versions 815:
(0.63 in)
(0.26 in)
6,6 mm
3 mm
(0.39 in)
9,8 mm
38,1 mm
FT
Flat top (1.5 in)
1 1 0 4 0 a
(0.12 in)
3,1 mm
42,1 mm Ø 6,35 mm
(1.66 in) (Ø 0.25 in)
11020a 44 mm
(1.73 in)
RD
22,4 mm
(0.88 in)
(0.12 in)
(0.26 in)
6,6 mm
(0.12 in)
3,1 mm
3 mm
38,1 mm
(1.5 in)
43 mm Ø 6,35 mm
12,7 mm
1 1 0 9 0 a
19,4 mm
(0.76 in)
(0.5 in)
(1.69 in) (Ø 0.25 in)
45 mm G
(1.77 in)
56,2 mm
(2.21 in)
(3.22 in)
82 mm
L
TRAVEL
814 VG
STRAIGHT RUNNING CHAINS WITH HIGH FRICTION SURFACE
RD
15,4 mm
2,5 mm
(0.26 in)
(0.12 in)
(0.1 in)
(0.6 in)
(0.39 in)
3,1 mm
9,8 mm
6,6 mm
38,1 mm
(1.5 in)
21,7 mm Ø 6,35 mm
(0.85 in) (Ø 0.25 in)
23,7 mm G
(0.93 in)
(1.10 in)
28 mm
L
TRAVEL
SSER814-K125VG Extra plus 4000 900 31,8 1 1/4 2,8 0.11 75 2.9 1,2 0.8
70 shore A
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 1 6 0 a 881 MO VG
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS WITH HIGH FRICTION SURFACE FOR MAGNETIC CURVES
e Co
nanc nstr
ucti
Maint
on
ALL
11160a
App
als
cat
M at
e ri
io n
li
45 mm RD = 80 mm
(1.77 in)
(0.12 in)
(0.26 in)
(RD = 3.15 in)
6,6 mm
(0.12 in)
13,5 mm
3,1 mm
(0.39 in)
(0.53 in)
9,8 mm
3 mm
42,1 mm 38,1 mm
(1.66 in) (1.5 in)
(1.06 in)
27 mm
Ø 6,35 mm
(Ø 0.25 in)
Other versions 881MO:
Characteristics: FT
Flat top
Sideflexing chains with vulcanized NBR rubber.
(2.28 in)
58 mm
All advantages of the magnetic system.
L
High strength.
R.
11060a
1 1 0 9 0 a 5 0 0 1 0 a TRAVEL
K 134 8857 M VG
SIDEFLEXING CHAINS WITH HIGH FRICTION SURFACE FOR MAGNETIC CURVES
K 134
60 mm
(2.36 in) RD = 150 mm
15,9 mm
57 mm
(0.26 in)
(0.12 in)
6,6 mm
(0.39 in)
(0.67 in)
9,8 mm
3 mm
17 mm
Ø 6,35 mm
(Ø 0.25 in)
(0.12 in)
3,1 mm
Characteristics:
Sideflexing chains with vulcanized NBR rubber.
Advantages: Other versions 8857M:
• All advantages of the magnetic system.
FT
• High strength. Flat top
• Helps standardising your conveyor constructions.
(5.32 in)
135 mm
• Same hinge width available in many chain types, both steel and
plastic, also LBP chains and flat top chains.
L
R.
11110a
EXTRA PLUS HB
Vacuum hardened
5 0 0 6 0 a
Information about this stainless steel pins
product is only available on TRAVEL
our Smart Guide® website. page
code: 7 3 5 6 0 a 1 1 1 0 0 a
MATERIAL MAX. WORKING LOAD WIDTH L R MIN. WEIGHT
ITEM DESCRIPTION
CHAIN RUBBER N lbs mm in mm in Kg/m lbs/ft.
Extra plus NBR - black
Revision 001
K 134
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 1 7 0 a 881 TAB VG
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS WITH HIGH FRICTION SURFACE
e Co
nanc nstr
ucti
Maint
on
ALL
11170a
App
als
RD = 80 mm cat
M at
e ri
io n
li
(RD = 3.15 in)
12,7 mm
22,4 mm
(0.12 in)
(0.88 in)
(0.25 in)
(0.5 in)
6,6 mm
3 mm
38,1 mm
(1.5 in)
(0.12 in)
3,1 mm
43 mm Ø 6,35 mm
(1.7 in) (Ø 0.25 in)
45 mm
(1.78 in)
56,2 mm
(2.21 in)
(3.23 in)
82 mm
Other versions 881TAB:
L
FT
R.
Flat top
TRAVEL
11070a
Characteristics:
• Sideflexing chains with vulcanized NBR rubber.
• Tabs reduce friction on the return section of the conveyor.
1 1 0 9 0 a 5 0 1 1 0 a
MATERIAL MAX. WORKING LOAD WIDTH L R MIN. WEIGHT
ITEM DESCRIPTION
CHAIN RUBBER N lbs mm in mm in Kg/m lbs/ft.
NBR - black
SSE881TAB-K325VG EXTRA 4850 1090 82,5 3 1/4 500 19.7 3,1 2.1
70 shore A
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
(0.26 in)
15,8 mm
(0.12 in)
6,6 mm
(0.62 in)
(0.39 in)
9,8 mm
ucti
38,1 mm
Maint
3 mm
on
(1.5 in) ALL
11180a
App
als
cat
M at
e ri
io n
(0.12 in)
li
3,1 mm
57 mm Ø 6,35 mm
(2.24 in) (Ø 0.25 in)
59 mm
(2.32 in) Other versions 8157:
(0.24 in)
(0.12 in)
6,1 mm
(0.39 in)
RD
9,8 mm
(0.26 in)
6,6 mm
3 mm
FT
38,1 mm Flat top
12,7 mm
58 mm Ø 6,35 mm
18,8 mm
(0.74 in)
(0.5 in)
11100a
(2.28 in) (Ø 0.25 in)
60 mm G
(2.36 in)
71,5 mm
(2.82 in)
(5.32 in)
135 mm
1 1 1 0 0 a
L
EXTRA PLUS HB
Chain type 8157 TAB
1 1 0 4 0 b Vacuum hardened
stainless steel pins
Characteristics:
• Flat top chains with vulcanized NBR rubber. page code:
• Tabs reduce friction on the return section of the conveyor. TRAVEL 7 3 5 6 0 a
805 VG
STRAIGHT RUNNING CHAINS WITH HIGH FRICTION SURFACE
15,8 mm
RD
(0.12 in)
(0.62 in)
(0.26 in)
6,6 mm
3 mm
(0.39 in)
9,8 mm
38,1 mm
(1.5 in)
(0.12 in)
3,1 mm
80,5 mm Ø 6,35 mm
(3.17 in) G (Ø 0.25 in) Other versions 805:
82,5 mm FT
(3.25 in) Flat top
EXTRA PLUS HB
11120a
Vacuum hardened
(5.32 in)
135 mm
page code: 7 3 5 6 0 a
Information about this
product is only available on
our Smart Guide® website.
Characteristics:
Flat top chains with vulcanized NBR rubber.
1 1 1 2 0 a TRAVEL
ucti
Maint
RD = 50 mm
on
LF (RD = 1.97 in) ALL
11190a
(0.28 in)
7,2 mm
App
als
4 mm
38,1 mm cat
M at
e ri
io n
li
(1.5 in)
13,5 mm
(0.53 in)
42,1 mm
9,5 mm
Ø 6,35 mm
(0.37 in)
(1.66 in)
(Ø 0.25 in)
44,5 mm
(1.75 in)
RD = 50 mm
(0.19 in)
(RD = 1.97 in)
4,8 mm
(0.28 in)
7,2 mm
38,1 mm
Top plate (1.5 in)
thickness 4,8 mm
13,5 mm
(0.5 in)
Ø 6,35 mm
(0.34 in)
8,7 mm
44,5 mm
Other versions 831: (Ø 0.25 in)
NG evo conveyor components
®
(1.75 in)
made from engineered plastic resin VG LBP
Longer wearlife than acetal Rubber top (low pressure)
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
42,1 mm
(1.66 in)
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21 11380a 11340a
L
TRAVEL
Note:
The 831 series has a top plate of 4,8 mm giving long wear life.
It also simplifies conveyor design when matching chains from the series 821
879 - 882 - 8257 - 882 M. AS
Other
1 1 0 5 0 a
Anti-static materials
Pin material: Acetal Resin
1 1 2 0 0 a
Austenitic steel (SPM) or plastic pin (PPM).
BREAKING LOAD WIDTH L WEIGHT
ITEM DESCRIPTION MATERIAL PLATE PIN MATERIAL
N lbs mm in Kg/m lbs/ft.
NGE820-K250 63,5 2 1/2 0,8 0.5
NGE820-K325 82,5 3 1/4 0,9 0.6
NGE820-K330 83,8 3 19∕64 0,9 0.6
NGE820-K350 88,9 3 1/2 0,9 0.6
SPM 4500 1000
NGE820-K400 101,6 4 1 0.7
NGE
NGE820-K450 114,3 4 1/2 1 0.7
Grey Blue
NGE820-K600 152,4 6 1,3 0.8
NGE820-K750 190,5 7 1/2 1,5 1.0
NGE820P-K325 82,5 3 1/4 0,8 0.5
PPM
NGE820P-K450 1700 380 114,3 4 1/2 1 0.7
(POM-White)
NGE820P-K750 190,5 7 1/2 1,4 1.0
LF820-K250 63,5 2 1/2 0,8 0.5
LF820-K325 82,5 3 1/4 0,9 0.6
LF820-K330 83,8 3 19∕64 0,9 0.6
LF820-K350 LF 88,9 3 1/2 0,9 0.6
SPM 5000 1030
LF820-K400 Brown 101,6 4 1 0.7
LF820-K450 114,3 4 1/2 1 0.7
LF820-K600 152,4 6 1,3 0.8
LF820-K750 190,5 7 1/2 1,5 1.0
NGE831-K325 82,5 3 1/4 1 0.7
NGE
NGE831-K450 SPM 4500 1000 114,3 4 1/2 1,3 0.9
Grey Blue
NGE831-K750 190,5 7 1/2 1,8 1.2
LF831-K325 82,5 3 1/4 1 0.7
LF
LF831-K450 SPM 5000 1030 114,3 4 1/2 1,3 0.9
Revision 001
Brown
LF831-K750 190,5 7 1/2 1,8 1.2
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 2 0 0 a DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR CHAINS 820 (P) - 831 (VG-LBP)
e Co
nanc nstr
Features:
ucti
Maint
• Split versions: quick and easy replacement. A C
on
Z ALL
11200a
• Foolproof design. mm mm
App
als
cat
• Excellent wear and chemical resistance. M at
e ri
17 13 44 io n
li
• Recyclable. 19 16 44
21 16 45
M10 38 mm
23 16 45
25 16 45
S+ 1
+0
FIXED
21 820-21R25M-DS 820-21R30M-DS 820-21R35M-DS 820-21R40M-DS 820-21R45M-DS
38 mm 23 820-23R25M-DS 820-23R30M-DS 820-23R35M-DS 820-23R40M-DS -
25 820-25R25M-DS 820-25R30M-DS 820-25R35M-DS 820-25R40M-DS 820-25R45M-DS
S+ 1
+0
53 mm Material: reinforced polyamide (black); screws in stainless steel, nuts in nickel plated brass, DIN 6885 key seat.
Ø OD ØP S See also:
Z mm mm mm
DF
17
19
103,9
117
105,47
117,34
55,9
61,9
1 1 0 5 0 a
21
23
129
142
129,26
141,21
67,8
73,8
1 1 2 0 0 b
25 154 153,21 79,8
27 166,8 165,2 85,8
29 178,5 177,24 91,8 Other chains:
831 VG
3 0 9 9 0 a 1 1 3 8 0 a
Features:
Ø OD
ØP
ucti
Maint
on
ALL
11200b
45 mm
App
als
38 mm cat
M at
16 mm
e ri
io n
li
S+ 1
+0
Ø OD
Features:
• Split versions: quick and easy replacement.
• Foolproof design.
DF 53 mm
• Excellent wear and chemical resistance.
• Recyclable.
See also the chains:
MOLDED RETURN SPROCKETS - SPLIT
820 - 820P - 831
Ø 25 Ø 30 Ø 35 Ø 40 Ø 45
Z
ITEM DESCRIPTION
1 1 1 9 0 a
21 820-21R25M-RS 820-21R30M-RS 820-21R35M-RS 820-21R40M-RS 820-21R45M-RS See also the sprockets
23 820-23R25M-RS 820-23R30M-RS 820-23R35M-RS 820-23R40M-RS - and idler wheels:
25 820-25R25M-RS 820-25R30M-RS 820-25R35M-RS 820-25R40M-RS 820-25R45M-RS
1 1 0 5 0 a
Material: reinforced polyamide (black); screws in stainless steel, nuts in nickel plated brass, DIN 6885 key seat.
1 1 2 0 0 a
Ø OD ØP S
Z mm mm mm
17 103,9 105,47 55,9
19 117 117,34 61,9
21 129 129,26 67,8
23 142 141,21 73,8
25 154 153,21 79,8
38 mm 15 mm 27 166,8 165,2 85,8
New design 29 178,5 177,24 91,8
S+ 1
+0
3 0 9 9 0 a
Features:
• Very high strength.
Ø OD
ØP
Ø 23* Ø 25 Ø 30 Ø 35 Ø 40
Z
ITEM DESCRIPTION
17 820-17R23M-RMS 820-17R25M-RMS 820-17R30M-RMS 820-17R35M-RMS 820-17R40M-RMS
19 820-19R23M-RMS 820-19R25M-RMS 820-19R30M-RMS 820-19R35M-RMS 820-19R40M-RMS
21 820-21R23M-RMS 820-21R25M-RMS 820-21R30M-RMS 820-21R35M-RMS 820-21R40M-RMS
23 820-23R23M-RMS 820-23R25M-RMS 820-23R30M-RMS 820-23R35M-RMS 820-23R40M-RMS
25 820-25R23M-RMS 820-25R25M-RMS 820-25R30M-RMS 820-25R35M-RMS 820-25R40M-RMS
27 820-27R23M-RMS 820-27R25M-RMS 820-27R30M-RMS 820-27R35M-RMS 820-27R40M-RMS
29 820-29R23M-RMS 820-29R25M-RMS 820-29R30M-RMS 820-29R35M-RMS 820-29R40M-RMS
Material: polyamide (natural white); screws in stainless steel, bushings in brass, DIN 6885 key seat. * Plain bore
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 2 1 0 a 828
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS
e Co
nanc nstr
LF
ucti
Maint
on
ALL
11210a
RD = 50 mm
App
als
(RD = 1.97 in) cat
M at
e ri
io n
li
(0.15 in)
7,6 mm
(0.3 in)
38,1 mm
4 mm
(1.5 in)
(Ø 0.28 in)
42,1 mm
11,2 mm
(0.44 in)
Ø 7,14
(1.66 in)
Features:
• Standardization
• Identical sprockets as sideflexing chains
• Standard conveyor construction
• High load capacity
• Particularly suitable for accumulation tables as well as for pressure-less combiners
• Improved product stability
• Reduced gap between adjacent tracks
• Better topplate flatness in the hinge area
1 1 2 6 0 a
1 1 0 5 0 a
BREAKING LOAD WIDTH L WEIGHT
ITEM DESCRIPTION MATERIAL PLATE
N lbs mm in Kg/m lbs/ft.
NGE828-K325 NGE 82,5 3 1/4 1,1 0.7
5400 1200
NGE828-K330 Grey Blue 83,8 3 19∕64 1,2 0.8
LF828-K325 LF 82,5 3 1/4 1,1 0.7
6000 1350
LF828-K330 Brown 83,8 3 19∕64 1,2 0.8
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 2 2 0 a 879M - 880M
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM
e Co
LF nanc nstr
ucti
Maint
on
RD = 50 mm ALL
11220a
45 mm
App
als
(RD = 1.97 in) cat
(1.77 in) M at
e ri
io n
li
13,5 mm
(0.53 in)
42,1 mm 38,1 mm
(1.66 in) (1.5 in)
B
(1.06 in)
27 mm
7,55 mm
(0.3 in)
Ø 7,14 mm
11,1 mm
(0.44 in)
(Ø 0.28 in)
L
R.
Nolu®-S curves
TRAVEL
NG®evo conveyor components are strongly recommended
made from engineered plastic resin with these chains!
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
See also:
1 1 2 6 0 b
1 1 2 6 0 a
5 0 0 1 0 a
Other versions 879 M:
VG LBP
Rubber top (low pressure)
Information about this
product is only available on
our Smart Guide® website.
Revision 001
11380a 11350a
K 134
K 134
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
(RD = 1.97 in)
ucti
made from engineered plastic resin
Maint
on
Longer wearlife than acetal ALL
7 3 7 0 0 a
11,5 mm
(0.45 in)
11230a
61,8 mm 38,1 mm
Lower friction than acetal
App
(2.43 in)
als
(1.5 in)
cat
B
Good chemical resistance
M at
e ri
io n
li
High abrasion resistance
(0.33 in)
8,3 mm
It meets the requirement for materials as
7,05 mm
(0.63 in)
16 mm
stated by EC1935/2004 and FDA CFR21 42,1 mm
norms for direct food contact (0.28 in)
(1.66 in)
Less dust than with acetal chains 45 mm
More......... (1.77 in)
Corner disk
R.
1 1 2 7 0 a
TRAVEL
Ra
R.
=
diu
s
diu
s=
Characteristics:
Ra
R.
The new 878 TAB series enables the designer and the manufacturer
of sideflexing conveyors to reduce the radius of the curves. This chain is suitable for solving conveying problems in Other versions 878 TAB:
confined spaces. Can also be used where products are conveyed on an incline or decline and accumulation may occur. VG GS LBP
The characteristics of this chain make this product unique in its design. Rubber top Gripper (low pressure)
Pin material: Austenitic steel.
Advantages:
• Small sideflexing radius R=190 mm (877 TAB and 878 TAB only).
• Tangential engagement. 11390a 11430a 11350a
• Specially shaped flights to improve the contact between the product and chain.
• Small gap between flights for high product stability. RD = 50 mm
(RD = 1.97 in)
11,5 mm
(0.45 in)
38,1 mm
LF (1.5 in)
B
7,55 mm
(0.3 in)
Ø 7,14 mm
(0.63 in)
42,1 mm
16 mm
(Ø 0.28 in)
(1.66 in)
61 mm
(2.4 in)
L
5 0 1 1 0 a
R.
TRAVEL
Nolu®-S curves
are strongly recommended
with these chains! Other versions 879 / 880 TAB:
VG Rubber top FT Vacuum
Note: See also the sprockets
The 879 TAB series has a top plate of 4,8 mm giving long wear life. and idler wheels:
It also simplifies conveyor design when matching chains from the series 821, 831, 8257 and 882.
Pin material: Austenitic steel 1 1 2 6 0 a 11390a 11235a
ucti
Maint
on
ALL
11235a
App
als
cat
M at
e ri
io n
li
RD = 50 mm
(RD = 1.97 in)
11,5 mm
(0.45 in)
38,1 mm
B (1.5 in)
7,55 mm
(0.3 in)
Ø 7,14 mm
(0.63 in)
42,1 mm
16 mm
(Ø 0.28 in)
(1.66 in)
61 mm
(2.4 in)
L
Nolu®-S curves
R.
are strongly recommended
with these chains! Ø 4,3 mm
NG evo conveyor components
®
1 1 2 6 0 a
5 0 1 1 0 a
11390a 11230a
1 1 2 4 0 a 879 - 880
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS
e Co
nanc nstr
ucti
LF
Maint
on
ALL
11240a
App
als
cat
RD = 50 mm M at
e ri
io n
li
(RD = 1.97 in)
SC 38,1 mm
B (1.5 in)
7,55 mm
Ø 7,14 mm
(0.3 in)
8°
(0.63 in)
16 mm
(Ø 0.28 in)
42,9 mm
(1.69 in)
R.
TRAVEL
NG®evo conveyor components
made from engineered plastic resin
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
Note:
The 879 series has a thicker top plate (4,8 mm) giving much more wear life. Nolu®-S curves
It also simplifies conveyor design when matching chains from the
series 821, 831, 8257 and 882. are strongly recommended
with these chains!
Pin material: Austenitic steel.
1 1 2 6 0 a
5 0 1 3 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 2 4 0 b 8800P
www.SystemPlastSmartGuide.com SIDELFEXING CHAINS
e Co
nanc nstr
ucti
Maint
on
ALL
11240b
App
als
RD = 50 mm cat
M at
e ri
io n
li
(RD = 1.97 in)
38,1 mm
SC
(1.5 in)
B
7,55 mm
8° Ø 7,14 mm
(0.3 in)
(0.43 in)
11 mm
(Ø 0.28 in)
42,9 mm
(1.69 in)
Nolu®-S curves
L
are strongly recommended
R.
with these chains!
TRAVEL
1 1 2 4 0 a
BREAKING WIDTH L B THICKNESS R MIN. SC
LOAD WEIGHT
MATERIAL PIN
ITEM DESCRIPTION STRAIGHT CURVING
PLATE MATERIAL mm in mm in mm in
N lbs mm in mm in Kg/m lbs/ft.
NGE8800P-K325 82,5 3 1/4 0,7 0.5
PPM 2200 495
NGE8800P-K450 NGE 114,3 4 1/2 0,8 0.5
4 0.16 457 18 44,5 1.75 41,3 1.63
NGE8800-K325 Grey Blue 82,5 3 1/4 0,7 0.5
SPM 5400 1350
NGE8800-K450 114,3 4 1/2 0,8 0.6
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 2 6 0 a
5 0 1 3 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
16 mm
on
ALL
11260a
App
als
cat
M at
e ri
S+ 1
+0
io n
li
Ø OD ØP ØM S
Z mm mm mm mm
Ø OD
ØM
ØP
9 108 111,4 78 59,3
10 122 123,3 88 65,25
11 135 135,2 99 71,2
12 147,3 147,2 111 77,2
DF 42,5 mm
Features:
• Split versions: quick and easy replacement.
• Foolproof design.
• Excellent wear and chemical resistance.
• Recyclable.
38 mm 16 mm
MOLDED DRIVE SPROCKETS - SPLIT
FIXED
S+ 1
+0
Ø 25 Ø 30 Ø 35 Ø 40
Z
ITEM DESCRIPTION
Ø OD
ØP
1 1 2 6 0 b IDLER WHEELS
www.SystemPlastSmartGuide.com FOR CHAINS 828-879-880-880 M-879OP-880OP-LBP831-879M(VG-LBP)-879M VG
e Co
nanc nstr
ucti
Maint
on
ALL
11260b
Features:
App
als
• Completely closed structure, easy to clean cat
M at
e ri
io n
li
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
38 mm S+ 1 A1
+0
Ø OD
DF A2
THESE IDLER WHEELS
CANNOT BE USED
MOLDED IDLER WHEELS - ONE PIECE FOR TAB CHAINS
FOR NON TAB CHAINS
Ø 25 Ø 30 Ø 35 Ø 40 A1 A2 Ø OD S
Z Z
ITEM DESCRIPTION mm mm mm mm
8 8 44 52 106 56,2
9 9 44 60 118 62,6
10
FOR THESE IDLER WHEELS GO TO:
(MIN Z17 IS SUITABLE)
1 1 0 5 0 a 10 44 60 129,8 68,6
11 11 44 60 142,5 74,6
12 12 44 60 155 80,5
Material: reinforced polyamide (black); screws in stainless steel.
Application: chains series 879 - 879 M - 880 - 880 M
1 1 2 6 0 d IDLER WHEELS
www.SystemPlastSmartGuide.com FOR CHAINS 877 (TAB) - 878 (TAB-VG-LBP) - 879 (TAB-VG) - 880TAB
e Co
New design nanc nstr
ucti
Maint
3 0 9 9 0 a
on
ALL
11260d
Features:
App
als
cat
M at
e ri
• Very high strength. io n
li
• Split versions: quick and easy replacement.
• Foolproof design. 38 mm 64 mm
• Completely closed structure, easy to clean and THESE IDLER WHEELS CAN
to disinfect. NOT BE USED FOR:
S+ 1
+0
• Excellent wear and chemical resistance. • 879 M - 880 M
• Recyclable. • LBP 879 M
• 879 -880
• 879 M VG
• 879J-880J
Ø OD
DF 80 mm
Ø 25 Ø 30 Ø 35 Ø 40 Ø OD S
Z Z
ITEM DESCRIPTION mm mm
9 880T-9R25M-WMS 880T-9R30M-WMS 880T-9R35M-WMS 880T-9R40M-WMS 9 117,0 62,6
10 880T-10R25M-WMS 880T-10R30M-WMS 880T-10R35M-WMS 880T-10R40M-WMS 10 129,8 68,6
11 880T-11R25M-WMS 880T-11R30M-WMS 880T-11R35M-WMS 880T-11R40M-WMS 11 142,2 74,6
12 880T-12R25M-WMS 880T-12R30M-WMS 880T-12R35M-WMS 880T-12R40M-WMS 12 154,7 80,5
Material: polyamide (natural white); screws in stainless steel, bushings in brass.
38 mm A1
Features:
• Completely closed structure, easier to
S+ 1
+0
DF A2
ucti
Maint
on
C ALL
11270a
App
als
B cat
M at
e ri
io n
li
Ø 90 mm
Material: polyamide.
Colour: black.
Ø 60 mm
10 mm
Ø 110 mm
ITEM DESCRIPTION
Ø 60 mm
mm
LBP 878 TAB HUB110-60R18M 18*
1 1 3 5 0 a HUB110-60R25M
HUB110-60R30M
25
30
Information about this product is M8
12 mm HUB110-60R40M 40
only available on our A
Smart Guide® website. Ø DF 5 mm
60 mm
TURNING DISKS FOR CHAINS 877 & 878 TAB - MOLDED VERSION
Radius = R
Closed Version
B R
Diam. = B ITEM DESCRIPTION Z mm mm
16 mm
1 - Turning disk.
2 - Single race radial ball bearing with two sliding seals,
Ø25 mm
type 6005-2RS (25x47x12).
3 - External (retaining) ring, Ø 25 DIN 471.
Radius = R 4 - Seal ring with dust cover, 25x47x7 DIN 3760 (NBR rubber).
Diam. = B
5 - Internal (retaining) ring, Ø 47 DIN 472.
6 - Bearing spacer.
Ø 55 mm
7 7 - Seal ring with dust cover, 25x35x7 DIN 3760 (NBR rubber).
10,5 mm
16 mm
Ø 35 mm
3 Open Version
1
B R
ITEM DESCRIPTION Z
50 mm
mm mm
878-380R25M-RB 32 337 190
878-400R25M-RB 34 359 200
5 Ø 25 mm 2 6
4
Turning
disk
Ra
R.
diu
=
Tangential
us
s=
sprocket
R.
1 1 2 8 0 a 882M
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM
e Co
nanc nstr
ucti
Maint
LF
on
ALL
11280a
App
als
cat
M at
e ri
io n
li
60 mm RD = 50 mm
(2.36 in) (RD = 1.97 in)
(0.37 in)
9,5 mm
19 mm (0.19 in)
4,8 mm
57 mm 38,1 mm
(0.67 in)
17 mm
(2.24 in) (1.5 in)
(0.75 in)
(1.26 in)
32 mm
Ø 8 mm
(Ø 0.32 in)
L
Lower friction than acetal Nolu®-S curves
Good chemical resistance
High abrasion resistance are strongly recommended
R.
It meets the requirement for materials as with these chains!
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
TRAVEL
1 1 3 0 0 a 5 0 0 6 0 a
BREAKING LOAD WIDTH L R MIN. WEIGHT
ITEM DESCRIPTION MATERIAL PLATE
N lbs mm in mm in Kg/m lbs/ft.
NGE882M-K750 190,5 7 1/2 2,2 1.4
NGE
NGE882M-K1000 9000 2020 254,0 10 610 24 2,5 1.6
Grey Blue
NGE882M-K1200 304,8 12 2,7 1.8
LF882M-K750 190,5 7 1/2 2,2 1.4
LF
LF882M-K1000 10000 2250 254,0 10 610 24 2,5 1.6
K 134 Brown
LF882M-K1200 304,8 12 2,7 1.8
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
K 134
11400a 11360a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
11290a
App
als
cat
M at
e ri
io n
li
RD = 50 mm
(RD = 1.97 in)
22,3 mm
(0.88 in)
(0.37 in)
(0.19 in)
9,5 mm
4,8 mm
SC 38,1 mm
(1.5 in)
8°
5 0 1 5 0 a
17,5 mm
(0.69 in)
61 mm 8,73 mm
(2.4 in) (0.34 in)
RD = 50 mm
(RD = 1.97 in)
(0.19 in)
4,8 mm
(0.37 in)
17,2 mm
9,5 mm
(0.68 in)
(1.06 in)
27 mm
38,1 mm
(1.5 in)
22,2 mm
(0.87 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal (2.23 in)
8,73 mm
(0.34 in)
Good chemical resistance 58 mm
High abrasion resistance (2.28 in)
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
5 0 1 4 0 a 76 mm
(2.99 in)
norms for direct food contact
Less dust than with acetal chains
More.........
VG LBP
Rubber top (low pressure) Nolu®-S curves
R.
TRAVEL
Characteristics:
The 882 BEVEL and TAB types have a larger hinge geometry and because of a well
balanced distribution of the material they have an excellent carrying load capacity.
Advantages: Heavy duty.
BREAKING SC WEIGHT
MATERIAL WIDTH L R MIN.
ITEM DESCRIPTION LOAD STRAIGHT CURVING
PLATE Kg/m lbs/ft.
N lbs mm in mm in mm in mm in
NGE882TAB-K450 114,3 4 1/2 2,0 1.4
NGE882TAB-K750 NGE 190,5 7 1/2 2,5 1.7
9000 2020 610 24 62 2.44 58 2.28
NGE882TAB-K1000 Grey Blue 254,0 10 2,9 1.9
NGE882TAB-K1200 304,8 12 3,4 2.3
LF882TAB-K450 114,3 4 1/2 2,0 1.4
LF882TAB-K750 LF 190,5 7 1/2 2,5 1.7
10000 2250 610 24 62 2.44 58 2.28
LF882TAB-K1000 Brown 254,0 10 2,9 1.9
Revision 001
ucti
Maint
on
• Foolproof design. ALL
11300a
S+ 1
+0
• Excellent wear and chemical resistance.
App
als
cat
M at
e ri
• Recyclable. io n
li
Ø OD
ØP
58,5 mm
New design
8257 882 BEVEL
3 0 9 9 0 a
Features:
1 1 3 1 0 a 1 1 2 9 0 a
• Very high strength. LBP 882M-LBP 882 TAB 8257VG
•
•
Split versions: quick and easy replacement.
Foolproof design.
1 1 3 6 0 a 1 1 4 1 0 a
• Completely closed structure, easy to clean and LBP 8257 882M
to disinfect.
• Excellent wear and chemical resistance.
38 mm
22 mm
1 1 3 7 0 a 1 1 2 8 0 a
• Recyclable. 882 M VG - 882 TAB VG
S+ 1
+0
1 1 4 0 0 a
Ø OD
ØM
ØP
1 1 3 0 0 b
DF 42,5 mm
1 1 3 0 0 b IDLER WHEELS
www.SystemPlastSmartGuide.com FOR CHAINS 882 (TAB-VG-LBP)
e Co
nanc nstr
Features:
ucti
Maint
• Completely closed structure, easy to clean
on
ALL
11300b
and to disinfect.
App
als
• Excellent wear and chemical resistance. cat
M at
e ri
io n
li
• Recyclable.
38 mm 79 mm
S+ 1
+0
Ø OD
DF 95 mm
Ø 25 Ø 30 Ø 35 Ø 40 Ø OD S
Z 38 59 Z
ITEM DESCRIPTION mm mm
10 882T-10R25M-W 882T-10R30M-W 882T-10R35M-W 882T-10R40M-W 10 129,8 68,6
1
+0
882 TAB
1 1 2 9 0 a 1 1 3 0 0 a
75
882 DF
TAB VG
1 1 4 0 0 a
LBP 882 TAB
Also available:
idler wheels, 1 1 3 5 0 a
go to:
1 1 0 9 0 b
1 1 3 1 0 a 8257
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS HEAVY DUTY SINGLE HINGE
e Co
nanc nstr
ucti
Maint
on
ALL
11310a
App
als
cat
LF M at
e ri
io n
li
RD = 50 mm
(RD = 1.97 in)
(0.37 in)
9,5 mm
(0.19 in)
4,8 mm
(0.74 in)
19 mm
38,1 mm
(1.5 in)
Ø 8 mm
14,2 mm
60 mm
(0.56 in)
(2.36 in) (Ø 0.32 in)
(2.24 in)
7 3 7 0 0 a
57 mm
Lower friction than acetal
L
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
Advantages: TRAVEL
• High strength
• Helps standardising your conveyor constructions
• Same hinge width available in many chain types,both steel and
plastic, also LBP chains and rubber top chains
11410a 11370a
1 1 3 0 0 a
1 1 3 2 0 a 821
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS DOUBLE HINGE
e Co
nanc nstr
ucti
Maint
on
ALL 11320a
LF
App
als
cat
M at
e ri
io n
li
RD = 50 mm
(RD = 1.97 in)
14,3 mm
(0.19 in)
(0.56 in)
(0.32 in)
4,8 mm
8 mm
38,1 mm
(1.5 in)
Ø 6,35 mm
(0.37 in)
9,5 mm
136 mm
(5.35 in) (Ø 0.25 in)
140 mm
(5.51 in)
L
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
TRAVEL
1 1 1 2 0 a 1 1 3 2 0 b
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
S+ 1
+0
11320b
App
als
cat
M at
e ri
io n
li
Ø 55 mm
Ø OD
ØP
DF 118 mm
Z
Ø 25 Ø 30 Ø 35 Ø 40 1 1 3 2 0 a
ITEM DESCRIPTION 821 VG
NOT SUITABLE FOR LBP8257!
25 821-25R25M-D 821-25R30M-D 821-25R35M-D 821-25R40M-D
1 1 4 1 0 a
MOLDED RETURN SPROCKETS - ONE PIECE ØP Ø OD S
Z LBP 8257
mm mm mm
25 821-25R25M-R 821-25R30M-R 821-25R35M-R 821-25R40M-R 25 153,2 155,0 80,5 1 1 3 7 0 a
Material: reinforced polyamide (black); screws in stainless steel, DIN 6885 key seat. 800-802-805
1 1 1 2 0 a
38 mm 138 mm
S+ 1
+0
Ø OD
Features:
• Completely closed structure, easy to clean and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
DF 154 mm
Ø 25 Ø 30 Ø 35 Ø 40 Ø OD S
Z Z
ITEM DESCRIPTION mm mm
19 821-19R25M-W 821-19R30M-W 821-19R35M-W 821-19R40M-W 19 118,0 62,6
21 821-21R25M-W 821-21R30M-W 821-21R35M-W 821-21R40M-W 21 129,8 68,6
25 821-25R25M-W 821-25R30M-W 821-25R35M-W 821-25R40M-W 25 155,0 80,5
Material: reinforced polyamide (black); screws in stainless steel.
38 mm 138 mm
S+ 1
+0
Ø OD
DF 155 mm
New design
3 0 9 9 0 a
MACHINED IDLER WHEELS - SPLIT Features:
• Very high strength.
Ø 30 Ø 35 Ø 40 Ø OD S • Split versions: quick and easy replacement.
Z Z • Foolproof design.
ITEM DESCRIPTION mm mm
• Completely closed structure, easy to clean and
21 821-21R30M-WMS 821-21R35M-WMS 821-21R40M-WMS 21 129,8 68,6
Revision 001
to disinfect.
23 821-23R30M-WMS 821-23R35M-WMS 821-23R40M-WMS 23 142,2 74,6
• Excellent wear and chemical resistance.
25 821-25R30M-WMS 821-25R35M-WMS 821-25R40M-WMS 25 154,7 80,5 • Recyclable.
Material: polyamide (natural white); screws in stainless steel, bushings in brass.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 3 2 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
Details, go to:
3 0 3 1 0 a
Revision 001
1 1 3 3 0 a SK 38
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS MINI SINGLE HINGE
e Co
nanc nstr
ucti
Maint
on
ALL
11330a
RD=80 mm
App
als
cat
(RD= 3.15 in) M at
e ri
io n
li
12,7 mm
(0.12 in)
(0.5 in)
38,1 mm
3 mm
(1.5 in)
38 mm
3,5 mm
New design
S+ 1
+0
3 0 9 9 0 a
Features:
Ø OD
ØP
1 1 3 4 0 a LBP 831
www.SystemPlastSmartGuide.com SINGLE HINGE STRAIGHT RUNNING CHAINS
WITH LOW NOISE ACCUMULATION ROLLERS
e Co
nanc nstr
ucti
Maint
on
ALL
11340a
App
als
RD = 400 mm cat
M at
e ri
io n
li
(Ø 0.43 in)
(RD = 15.74 in)
Ø 11 mm
21,7 mm
(0.85 in)
38,1 mm
(0.28 in)
7,2 mm
(0.34 in)
8,7 mm (1.5 in)
(1.1 in)
28 mm
19,3 mm
(0.76 in)
(0.19 in)
4,8 mm
42,1 mm
Ø 6,35 mm
(Ø 0.25 in) (1.66 in)
44 mm
(1.73 in)
L
TRAVEL
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
1 1 0 5 0 a
1 1 2 0 0 a
11190a 11380a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 3 5 0 a LBP 879 M
www.SystemPlastSmartGuide.com SIDEFEXING CHAINS FOR MAGNETIC SYSTEM
WITH LOW NOISE ACCUMULATION ROLLERS
e Co
nanc nstr
ucti
Maint
RD = 400 mm
Ø10,9 mm
on
ALL
(Ø 0.43 in)
11350a
30,4 mm
19,3 mm
(0.76 in)
(1.2 in)
App
38,1 mm
als
13,5 mm
cat
(0.53 in)
(1.06 in)
M at
e ri
27 mm
io n
li
(1.5 in)
7,55 mm
(0.3 in)
TRAVEL
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21 11380a
norms for direct food contact
Less dust than with acetal chains
More.........
1 1 2 6 0 a 5 0 0 7 0 a
MATERIAL BREAKING LOAD WIDTH L R MIN. WEIGHT
ITEM DESCRIPTION
PLATE ROLLER N lbs mm in mm in Kg/m lbs/ft.
NGE
NGE879LBP-M-K325 Water blue 5100 1150 82,5 3 1/4 500 19.7 2,3 1.5
Grey Blue
Standard length: 40 pitches (5 ft. - 1,524 m) Breaking load according to standard ISO 4348 - DIN 8153
20,3 mm
34,8 mm
(0.6 in)
(1.37 in)
(0.8 in)
38,1 mm
61,8 mm
4,8 mm
(0.19 in)
Flat top
8,3 mm
11,8 mm
(0.46 in)
20,8 mm
(0.82 in)
42,1 mm
(1.66 in)
45 mm
Nolu®-S curves (1.77 in) 11230a
Grey Blue
Standard length: 40 pitches (5 ft. - 1,524 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 3 6 0 a LBP 882M
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS FOR MAGNETIC SYSTEM HEAVY DUTY SINGLE HINGE
WITH LOW NOISE ACCUMULATION ROLLERS
e Co
RD = 400 mm nanc nstr
(RD = 15.74 in)
19,3 mm
e
(0.76 in)
(0.19 in)
ucti
Maint
4,8 mm
(Ø 0.32 in)
38,1 mm L
(0.37 in)
on
ALL
9,5 mm
Ø8 mm
11360a
(1.5 in)
App
als
cat
33,5 mm
(1.32 in)
M at
e ri
io n
li
(Ø 0.37 in)
Ø 9,5 mm
14,2 mm
57 mm
(0.56 in)
(2.24 in) Other versions 882 M:
60 mm
(2.36 in) FT
Flat top
R.
11280a
TRAVEL
NG®evo conveyor components VG
made from engineered plastic resin Rubber top
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
11400a
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
1 1 3 0 0 a 5 0 0 7 0 a
MATERIAL BREAKING LOAD WIDTH L R MIN. WEIGHT
ITEM DESCRIPTION
PLATE ROLLER N lbs mm in mm in Kg/m lbs/ft.
NGE882LBP-M-K750 190,5 7 1/2 3,9 2.6
NGE Water
NGE882LBP-M-K1000 9000 2000 254,0 10 610 24.01 5.0 3.3
Grey Blue blue
NGE882LBP-M-K1200 304,8 12 5,9 3.9
Standard length: 40 pitches (5 ft. - 1,524 m) Breaking load according to standard ISO 4348 - DIN 8153
K 134
LBP 882 TAB
SIDEFLEXING CHAINS WITH LOW NOISE ACCUMULATIONK ROLLERS
134
RD = 400 mm
19,3 mm
(0.76 in)
17,2 mm
22,2 mm
(0.37 in)
(0.68 in)
(0.87 in)
9,5 mm
(1.5 in)
41,5 mm
(1.63 in)
(1.06 in)
27 mm
Ø (0.37 in)
Ø 9,5 mm
60 mm
(2.36 in)
NG evo conveyor components
® 76 mm
made from engineered plastic resin (2.99 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
R.
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
TRAVEL
11290a 11400a
5 0 1 4 0 a
MATERIAL BREAKING LOAD WIDTH L R MIN. WEIGHT
ITEM DESCRIPTION
PLATE ROLLER N lbs mm in mm Kg/min lbs/ft.
NGE882LBP-TAB-K375 95,3 3 3/4 3,3 2.2
NGE882LBP-TAB-K450 114,3 4 1/2 4,0 2.7
NGE Water
NGE882LBP-TAB-K750 9000 2000 190,5 7 1/2 610 24.01 4,7 3.2
Revision 001
1 1 3 7 0 a LBP 8257
www.SystemPlastSmartGuide.com HEAVY DUTY SINGLE HINGE STRAIGHT RUNNING CHAINS
WITH LOW NOISE ACCUMULATION ROLLERS
e Co
nanc nstr
ucti
Maint
on
ALL
11370a
App
als
cat
M at
e ri
io n
li
RD = 400 mm
(RD = 15.74 in)
(Ø 0.43 in)
Ø 11 mm
19,3 mm
(0.76 in)
(Ø 0.32 in)
(0.37 in)
(0.19 in)
38,1 mm
Ø 8 mm
9,5 mm
4,8 mm
(1.5 in) L
14,2 mm
33,5 mm
(0.56 in)
(1.32 in)
Good chemical resistance (2.24 in)
High abrasion resistance 60 mm
It meets the requirement for materials as (2.36 in)
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
TRAVEL
Other versions 821:
FT VG
Flat top Rubber top
11310a 11410a
1 1 3 0 0 a
MATERIAL BREAKING LOAD N WIDTH L WEIGHT
ITEM DESCRIPTION
PLATE ROLLER N lbs mm in Kg/m lbs/ft.
NGE8257LBP-K750 190,5 7 1/2 5,7 4.5
NGE
NGE8257LBP-K1000 Water blue 9000 2000 254,0 10 7,2 4.8
Grey Blue
NGE8257LBP-K1200 304,8 12 8,1 5.4
Standard length: 40 pitches (5 ft. - 1,524 m) Breaking load according to standard ISO 4348 - DIN 8153
LBP 821
DOUBLE HINGE STRAIGHT RUNNING CHAINS
WITH LOW NOISE ACCUMULATION ROLLERS
RD = 400 mm
(Ø 0.43 in)
Ø 11 mm
28,8 mm
(1.13 in)
(RD = 15.74 in)
(0.19 in)
4,8 mm
38,1 mm L= 190,5 mm
(0.32 in)
19,3 mm
(0.76 in)
136 mm
(0.37 in)
Ø 6,35 mm
9,5 mm
11320a 11410a
NGE
NGE821LBP-K1000 Water blue 7500 1650 254,0 10 6,9 4.6
Grey Blue
NGE821LBP-K1200 304,8 12 8,0 5.4
Standard length: 40 pitches (5 ft. - 1,524 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 3 8 0 a 831 VG
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS WITH HIGH FRICTION SURFACE
e Co
nanc nstr
RD = 50 mm
ucti
Maint
on
(RD = 1.97 in) ALL
11380a
38,1 mm
App
als
(0.12 in)
cat
3 mm
(1.5 in)
M at
e ri
io n
li
(0.28 in)
7,2 mm
16,5 mm
(0.65 in)
(0.35 in)
8,7 mm
(0.19 in)
(0.31 in)
Ø 6,35 mm
4,8 mm
7,8 mm
44 mm (Ø 0.25 in) Other versions 831:
(1.73 in) FT
15 mm Flat top
42,1 mm
(1.66 in)
WR
11190a
L
NG evo conveyor components
®
LBP
made from engineered plastic resin (low pressure)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal TRAVEL
Good chemical resistance
High abrasion resistance
11340a
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
879 M VG
SIDEFLEXING CHAINS WITH HIGH FRICTION SURFACE FOR MAGNETIC CURVES
RD=50 mm
45 mm (RD= 1.97 in)
18,9 mm
(1.77 in)
(0.74 in)
7,8 mm
(0.19 in)
(0.3 in)
4,8 mm
13,5 mm
(0.53 in)
42,1 mm 38,1 mm
(1.5 in)
(1.66 in)
27 mm
(1.06 in)
Ø 7,14 mm
(Ø 0.28 in)
7,55 mm
11,1 mm
(0.44 in)
11220a
Advantages:
• One conveyor construction
• Easy to clean 11350a
• Hygienic concept
• Easy maintenance
5 0 0 1 0 a 1 1 2 6 0 b
MATERIAL BREAKING LOAD WIDTH L R WEIGHT
ITEM DESCRIPTION
PLATE RUBBER N lbs mm in mm in Kg/m lbs/ft.
TPR
Revision 001
NGE
NGE879M-K325VG Water blue 4700 1040 82,5 3¼ 500 19.7 1,2 0.8
Grey Blue
70 shore A
K 134
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
Nolu®-S curves
on
ALL 11390a
App
are strongly recommended
als
cat
M at
e ri
io n
li
with these chains! RD = 50 mm
(RD = 1.97 in)
(0.19 in)
7,05 mm
38,1 mm
(0.28 in)
4,8 mm
(0.12 in)
3 mm
(1.5 in)
(0.33 in)
8,3 mm
(0.46 in)
11,8 mm
42,1 mm
20,8 mm
(0.82 in)
(1.66 in)
45 mm
(2.36 in)
60 mm
NG evo conveyor components
®
(1.77 in)
made from engineered plastic resin
L
Longer wearlife than acetal 61,8 mm
7 3 7 0 0 a
Lower friction than acetal (2.43 in)
Good chemical resistance
R.
High abrasion resistance
It meets the requirement for materials as 15 mm
stated by EC1935/2004 and FDA CFR21
norms for direct food contact (0.6 in)
Less dust than with acetal chains
More......... TRAVEL
Characteristics:
Turning disks can be used, as the
chain is designed to turn around a Other versions 878 TAB:
very small curve radius. FT GS LBP
Pin material: Austenitic steel Flat top Gripper (low pressure)
See also the sprockets
For Drive Disks, go to and idler wheels:
1 1 2 7 0 a 1 1 2 6 0 a 5 0 1 1 0 a 11230a 11430a 11350a
Ra
diu
s=
R.
RD = 50 mm
Ø 7,14 mm
(Ø 0.28 in)
(0.3 in)
(0.19 in)
4,8 mm
3 mm
38,1 mm
(1.5 in)
11,5 mm
(0.45 in)
42,1 mm
(0.63 in)
16 mm
(1.66 in)
45 mm
(2.36 in)
60 mm
(1.77 in)
L
61 mm
(2.4 in)
R.
1 1 4 0 0 a 882 M VG
www.SystemPlastSmartGuide.com SIDEFLEXING CHAINS WITH HIGH FRICTION SURFACE
FOR MAGNETIC CURVES
e Co
nanc nstr
ucti
Maint
on
ALL
11400a
App
als
60 mm
cat
M at
e ri
(2.36 in) RD = 50 mm io n
li
57 mm (RD = 1.97 in)
(Ø 0.32 in)
(0.87 in)
(0.12 in)
22 mm
Ø 8 mm
3 mm
14,2 mm
(2.24 in)
(0.56 in)
1 mm 38,1 mm
17 mm
(0.67
(0.04 in) (1.5 in)
(1.26 in)
32 mm
(0.19 in)
4,8 mm
(0.37 in)
NG evo conveyor components
®
9,5 mm
made from engineered plastic resin
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
(0.87 in)
High abrasion resistance
22 mm
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
WR
L
Less dust than with acetal chains
More.........
Other versions 882 M:
R.
Advantages:
• High breaking load FT LBP
Flat top (low pressure)
• Helps standardising your conveyor constructions
• Same hinge width available in many chain types, both steel and 16 mm
plastic, also LBP chains and flat top chains (0.63 in)
Note: 11280a 11360a
TRAVEL
Plastic magnetic system chains do not have tabs or bevels;
it is the Stainless Steel pin in the chain which is attracted by
the magnets embedded in the curve.
Pin material: Ferritic Stainless Steel 1 1 3 0 0 a 1 1 3 0 0 b 5 0 0 6 0 a
MATERIAL BREAKING LOAD WIDTH L WIDTH WR R MIN. WEIGHT
ITEM DESCRIPTION
PLATE RUBBER N lbs mm in mm in mm in Kg/m lbs/ft.
NGE882M-K750VG TPR 190,5 7½ 134 5 5∕16 2,1 1.4
NGE
NGE882M-K1000VG Water blue 8100 2600 254,0 10 192 7 1/2 610 24.01 2,5 1.6
Grey Blue
NGE882M-K1200VG 70 shore A 304,8 12 252 9 2,8 1.9
882 TAB
K 134 VG
RD = 50 mm
8,73 mm
4,8 mm
(0.67 in)
3 mm
17 mm
1 mm 38,1 mm
(0.04 in) (1.5 in)
(1.18 in)
30 mm
(0.37 in)
9,5 mm
Less dust than with acetal chains Other versions 882 TAB:
More.........
23 mm
FT
R.
LBP
Advantages: Flat top (low pressure)
• High breaking load
• This chain is particularly suitable where heavier
and larger products are conveyed. 16 mm
11290a 11360a
(0.63 in)
1 1 3 0 0 b 1 1 3 0 0 a 5 0 1 4 0 a
MATERIAL BREAKING LOAD WIDTH L WIDTH WR R MIN. WEIGHT
ITEM DESCRIPTION
PLATE RUBBER N lbs mm in mm in mm in Kg/m lbs/ft.
NGE882TAB-K750VG TPR 190,5 7 1/2 134 5 5/16 2,4 1.6
Revision 001
NGE
NGE882TAB-K1000VG Water blue 8100 2600 254,0 10 192 7 1/2 610 24.01 2,7 1.8
Grey Blue
NGE882TAB-K1200VG 70 shore A 304,8 12 252 10 2,9 2.0
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 4 1 0 a 8257 VG
www.SystemPlastSmartGuide.com STRAIGHT RUNNING CHAINS WITH HIGH FRICTION SURFACE
e Co
RD = 50 mm nanc nstr
ucti
Maint
(0.37 in)
(0.12 in)
(RD = 1.97 in)
9,5 mm
(0.87 in)
on
ALL
22 mm
3 mm
1 mm
11410a
38,1 mm
(0.04 in)
App
als
(1.5 in)
cat
M at
e ri
io n
li
(0.19 in)
(0.31 in)
4,8 mm
7,8 mm
14,2 mm
(0.56 in)
60 mm
(2.36 in)
16 mm
(0.63 in)
Other versions 8257:
NG evo conveyor components
®
(0.87 in)
22 mm
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as stated by
(2.24 in)
57 mm
11310a
WR
EC1935/2004 and FDA CFR21 norms for direct food contact
L
Less dust than with acetal chains LBP
More......... (low pressure)
Characteristics:
• The return section of the conveyor can be constructed using standard
wearstrips or return rollers to support the chain on its return.
11370a
Advantages:
• High strength TRAVEL
• Helps standardising your conveyor constructions
• Same hinge width available in many chain types, both steel and plastic, 1 1 3 0 0 a
also LBP chains and Flat Top chains Pin material: Austenitic steel
MATERIAL BREAKING LOAD WIDTH L WIDTH WR WEIGHT
ITEM DESCRIPTION
PLATE RUBBER N lbs mm in mm in Kg/m lbs/ft.
NGE8257-K450VG 114,3 4 1/2 90 3 1/2 2,0 1.3
NGE8257-K750VG TPR 190,5 7 1/2 134 5 5/16 2,3 1.5
NGE
Water blue 8100 2600
NGE8257-K1000VG Grey Blue 254,0 10 192 7 1/2 2,6 1.7
70 shore A
NGE8257-K1200VG 304,8 12 252 10 3,0 2.0
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
821 VG
STRAIGHT RUNNING CHAINS WITH HIGH FRICTION SURFACE
RD = 50 mm
(0.12 in)
7,95 mm
(0.68 in)
(0.31 in)
1 mm
3 mm
38,1 mm
(0.04 in)
(1.5 in)
(0.19 in)
(0.31 in)
(0.37 in)
4,8 mm
140 mm Ø 6,35 mm
7,8 mm
9,5 mm
11320a
WR
More......... LBP
(low pressure)
Characteristics:
The return section of the conveyor can be constructed using
standard wearstrips or return rollers to support the chain on its return.
Advantages: 11370a
NGE
NGE821-K1000VG Water blue 7000 1550 254,0 10 192 7 1/2 3,4 2.2
Grey Blue
NGE821-K1200VG 70 shore A 304,8 12 252 10 3,8 2.5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
Modular belts
3 &0sprockets
0 1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a(RD= 10.2 in)Side
RD= 260 mm 5 1guide5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
(0.12 in)
15,1 mm
3 mm
(0.6 in)
Ø 5,08 mm
(0.67 in)
17 mm
1 1 4 2 0 a
(Ø 0.2 in)
1873 VG
33,2 mm
(1.31 in)
(0.19 in)
4,8 mm
(0.12 in)
e
15,1 mm
ucti
3 mm
(RD= 10.2 in) Ø 5,08 mm
(0.59 in)
Maint
20,6 mm
(0.81 in)
18 mm
(0.67 in)
on
17 mm
(0.71 in) (Ø 0.2 in) ALL
11420a
App
als
cat
33,2 mm
(1.31 in)
M at
e ri
io n
li
(0.19 in)
4,8 mm
31,75 mm 19,05 mm 19,05 mm
(1.25 in) (0.75 in) (0.75 in)
35 mm
(1.38 in)
57 mm
(2.24 in)
Other versions
1873 TAB:
FT
Flat top
Ø11,89 mm Ø 11,89 mm
(Ø 0.47 in) (Ø 0.47 in)
304,8 mm
(11.02 in)
280 mm
11470a
190,5 mm
(12 in)
135 mm
(5.3 in)
(7.5 in)
GS
12,7 mm
Gripper
(0.5 in)
12,7 mm
(0.5 in)
R.
R.
11440a
VG Neck
Sterilizer
19 mm
(0.75 in) TRAVEL
19 mm
(0.74 in) TRAVEL 11425a
18 mm
RD= 260 mm
(0.12 in)
20,6 mm
(0.81 in)
(0.71 in)
15,1 mm
(RD= 10.2 in)
3 mm
(0.6 in)
1 mm Ø 5,08 mm
(0.67 in)
17 mm
Nolu®-S curves
(0.19 in)
4,8 mm
Advantages:
• High speed
• Very high loads NG evo conveyor components
®
(7.5 in)
Water blue
NGE1873TAB-K1200VG C45 Grey Blue 27000 6080
70 shore A 304,8 12 610 24.01 3,8 2.6
Revision 001
R.
19 mm
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
(0.33 in)
8,5 mm
(RD= 10.2 in) Ø 5,08 mm
15,1 mm
(0.59 in)
(0.67 in)
18 mm e Co
nanc nstr
17 mm
(0.71 in) (Ø 0.2 in)
ucti
Maint
on
ALL
App
als
cat
M at
e ri
io n
li
31,75 mm 19,05 mm 19,05 mm
4,8 mm
(1.25 in) (0.75 in) (0.75 in)
35 mm
(1.38 in)
57 mm
(2.24 in) Other versions
1873 TAB:
FT
Flat top
Ø 11,89 mm 11470a
(Ø 0.47 in)
GS
Gripper
(11.02 in)
280 mm
295 mm
(11.6 in)
NG evo conveyor components
®
12,7 mm
(0.5 in)
RD RD
= 260
= 260
mmmm
in)
(0.33 in)
8,5 mm
8,5 mm
(RD=
(RD=
10.210.2
in) in)
Ø 5,08
Ø 5,08
mmmm
15,1 mm
(0.59mm
in)
(0.59 in)
20,6 mm
(0.81mm
in)
(0.67 in)
in) 38,6 mm (0.33
18 mm
18 mm
in)
(0.81 in)
(3.29 in) 17 mm
17 mm
(0.71
(0.71
in) in) (Ø 0.2
(Ø in)
0.2 in)
(0.67
15,1
20,6
(3.29mm
in)
Advantages:
(0.19 in) 38,6
31,75
31,75
mmmm 19,05
19,05
mmmm 19,05
19,05
mmmm
4,8 mm
4,8 mm
Note:
ANSI 60 roller chain.
5 0 1 6 0 a
MATERIAL BREAKING LOAD WIDTH L WIDTH WR R MIN. WEIGHT
ITEM DESCRIPTION ROLLER 16 mm
16 mm
PLATE RUBBER N lbs mm in mm
(0.62 in) in)
(0.62 in mm in Kg/m lbs/ft.
CHAINS
NGE1873SS-TAB-K750VG85H8.5 TPR 190,5 7.5 186,5 7.4 500 19.7 3.6 2.4
NGE
Austenitic Water blue 21000 4730
Grey Blue
Revision 001
NGE1873SS-TAB-K1161VG85H8.5 85 shore A 295 11.6 280 11.02 610 24.01 4,3 2.9
Standard length: 160 pitches (10 ft. - 3,048 m) - 80 Flights Breaking load according to standard ISO 4348 - DIN 8153
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
4,8 mm 4,8 mm
K nanc nstr
ucti
Maint
on
ALL
11430a
App
als
(0.33 in) (0.33 in)
8,3 mm 8,3 mm
cat
e ri
io n
li
7,05 mm 7,05 mm
11,8 mm 11,8 mm
20,8 mm 20,8 mm
38,1 mm
61,8 mm
(2.43 in)
(0.33 in)
8,3 mm
7,05 mm
11,8 mm
(0.28 in)
(0.46 in)
42,1 mm
20,8 mm
38,1 mm
(0.82 in)
(1.66 in) (0.15 in) TRAVEL
NG evo conveyor components
®
45 mm
made from engineered plastic resin (1.77 in)
Longer wearlife than acetal TRAVEL
7 3 7 0 0 a
Lower friction than acetal
61,8 mm
(2.43 in)
GS 4
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21 Nolu®-S curves
norms for direct food contact are strongly recommended
Less dust than with acetal chains
More......... with these chains!
Advantages: TRAVEL
• Exceptional durability. NOW AVAILABLE IN
• Optimum performance. CHEMICAL RESISTANT
• Extremely low noise level. MATERIAL
• Removable gripper.
• Rubber top with high resistance. 1 1 2 6 0 a
Note:
• Not suitable with oils. 5 0 1 1 0 a
ITEM DESCRIPTION K H MATERIAL R MIN. WEIGHT
CHAINS KIT RUBBER + PIN mm in mm in PLATE GRIPPER mm in Kg/m lbs/ft.
NGE THERMO-
NGE878TAB-K325GS1 GRPN-K325-GS1-TPR 82 3.23 41 1.61 210 8.27 4,7 3.1
Grey Blue PLASTIC
NGE THERMO-
NGE878TAB-K325GS2 GRPN-K325-GS2-TPR 82 3.23 35 1.38 225 8.9 4,1 2.7
Grey Blue PLASTIC
NGE THERMO-
NGE878TAB-K325GS4 GRPN-K325-GS4-TPR 82 3.23 33 1.30 250 9.84 4,1 2.8
Grey Blue PLASTIC
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
1 1 4 4 0 a
Other versions 878 TAB:
FT VG LBP
Flat top Rubber top (low pressure)
continue
11430b
K
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a 5K 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
4,8 mm
in) in)
accessories
H
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
11,8 mm 4,8 mm
H
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
8,3 mm
in) in)
7,05 mm
in) in)
42,1 mm
20,8 mm
38,1 mm
in) in)
1 1 4 3 0 b
(0.33 (0.33
(0.28 (0.28
878 TAB GS - PP MATERIAL
(0.46 (0.46
8,3 mm
(1.66 in) (0.15 in)
(0.82 (0.82
7,05 mm
11,8 mm
42,1 mm
20,8 mm
45 mm 38,1 mm
www.SystemPlastSmartGuide.com SIDEFLEXING PLASTIC
(1.66 in) CHAINS
(1.77 in) WITH SNAP ON GRIPPER
(0.15 in)
45 mm
61,8 mm
e Co
nanc nstr
(1.77 in)
(2.43
GS 1 GS 2
61,8 mm
ucti
Maint
K
(2.43 in)
on
ALL
11430b
App
als
cat
4,8 mm
M at
(0.19 in)
e ri
io n
li
H
TRAVEL back
11430a
8,3 mm
(0.33 in)
7,05 mm
11,8 mm
(0.28 in)
(0.46 in)
42,1 mm
20,8 mm
38,1 mm
(0.82 in)
(1.66 in) (0.15 in) GS 4
45 mm
(1.77 in)
TRAVEL
61,8 mm
(2.43 in)
1 1 2 6 0 a 5 0 1 1 0 a
TRAVEL
For loose EPDM-PP grippers
Information about this
, go to:
product is only available on
our Smart Guide® website.
1 1 4 4 0 b
K H MATERIAL R MIN. WEIGHT
ITEM DESCRIPTION
mm in mm in PLATE GRIPPER mm in Kg/m lbs/ft.
PP878TAB-K325GS1 82 3.23 41 1.61 PP Grey EPDM - PP beige 210 8.27 4,7 3.1
PP878TAB-K325GS2 82 3.23 35 1.38 PP Grey EPDM - PP beige 225 8.86 4,1 2.7
PP878TAB-K325GS4 82 3.23 33 1.30 PP Grey EPDM - PP beige 250 9.84 4,1 2.8
Standard length: 80 pitches (10 ft. - 3,048 m) Breaking load according to standard ISO 4348 - DIN 8153
7,05 mm
(0.28 in)
42,1 mm
20,8 mm
(0.82 in)
(1.66 in)
45 mm
(1.77 in)
61,8 mm
(2.43 in)
L
14,3 mm14,3 mm
(0.56 in) (0.56 in)
(0.81 in) (0.81 in) (0.16 in) (0.16 in)
25,4 mm25,4 mm
20,6 mm20,6 mm 4 mm 4 mm
(1 in)
H
e Co
nanc nstr
ucti
Maint
(1 in)
on
ALL
H
11440a
App
als
31,75 cat
M a t mm
Ø 5,08 mm 19,05
e ri
io n
li
mm
(Ø 0.2 in) (0.75 in)
(1.25 in)
ROLLER
Ø 11,91x12,7 mm
31,75 Ø 5,08 mm
35 mm continue19,05 mm
11440b
K GS 1 mm
(Ø 0.47x0.5 in)
(1.38 (Ø 0.2 in) (0.75 in)
(1.25 in)
in)
57 mm
35 mm
GS 2
14,3 mm
(2.24 in)
(0.56 in)
(0.16 in)
25,4 mm
4 mm
(1.38 in)
(1 in)
H
57 mm
(2.24 in)
31,75
20,6 mm
Ø 5,08 mm
(0.81 in)
19,05 mm
mm
(Ø 0.2 in) (0.75 in)
(1.25 in)
35 mm
(1.38 in) TRAVEL
57 mm TRAVEL
NG evo conveyor components
®
Note: TRAVEL
ANSI 60 roller chain
5 0 1 6 0 a
ITEM DESCRIPTION K H MATERIAL WEIGHT
ROLLER
CHAINS KIT FLIGHT RUBBER + PIN ONLY RUBBER mm in mm in PLATE GRIPPER Kg/m lbs/ft.
CHAIN
NGE1873TAB-K325GS1 C45
GRPK-NGE1873TAB-K325GS1-TPR GRP-K325-GS1-TPR 82 3.23 NGE 4,7 3.1
NGE1873SS-TAB-K325GS1 Austenitic THERMO-
41 1.61 Grey
NGE1873TAB-K450GS1 C45 PLASTIC
GRPK-NGE1873TAB-K450GS1-TPR GRP-K450-GS1-TPR 114 4.5 Blue 7,1 4.7
NGE1873SS-TAB-K450GS1 Austenitic
NGE1873TAB-K325GS2 C45
GRPK-NGE1873TAB-K325GS2-TPR GRP-K325-GS2-TPR 82 3.23 4,1 2.7
NGE1873SS-TAB-K325GS2 Austenitic NGE THERMO-
35 1.38 Grey
NGE1873TAB-K450GS2 C45 PLASTIC
GRPK-NGE1873TAB-K450GS2-TPR GRP-K450-GS2-TPR 114 4.5 Blue 6,4 4.3
NGE1873SS-TAB-K450GS2 Austenitic
NGE1873TAB-K325GS4 C45
GRPK-NGE1873TAB-K325GS4-TPR GRP-K325-GS4-TPR 82 3.23 4,2 2.8
NGE1873SS-TAB-K325GS4 Austenitic NGE THERMO-
33 1.3 Grey
NGE1873TAB-K450GS4 C45 PLASTIC
GRPK-NGE1873TAB-K450GS4-TPR GRP-K450-GS4-TPR 114 4.5 Blue 6,6 4.4
NGE1873SS-TAB-K450GS4 Austenitic
Standard length: 160 pitches (10 ft. - 3,048 m) - 80 Flights Breaking load according to standard ISO 4348 - DIN 8153
7 3 5 6 3 a
continue
11440b
K
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
14,3 mm
(0.56 in)
(0.16 in)
4 mm
3 Modular
0 belts Chain & belt
5Frame & structure
5Bearing
6 0supports
1 0 a
H
&0sprockets
1 0 a 5return
1 0systems
1 0 a 4supports
0 1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
20,6 mm
(0.81 in)
Ø 5,08 mm 19,05 mm
25,4 mm
K
(1 in)
(Ø 0.2 in) (0.75 in)
www.SystemPlastSmartGuide.com SIDEFEXING PLASTIC CHAINS(1.25
WITHin) SNAP ON GRIPPER
35 mm ROLLER
K
14,3 mm
(0.56 in)
e Co
nanc nstr
(0.16 in)
(1.38 in) Ø 11,91x12,7 mm
4 mm
H
(Ø 0.47x0.5 in)
ucti
Maint
57 mm
on
(2.24 in) ALL
11440b
14,3 mm
(0.56 in)
(0.16 in)
App
4 mm
als
H
cat
M at
e ri
io n
li
GS 1
31,75
20,6 mm
(0.81 in) Ø 5,08 mm 19,05 mm
25,4 mm
mm
25,4 mm (1 in)
(Ø 0.2 in) (0.75 in)
(1.25 in) back
11440a
31,75
20,6 mm
35 mm
(0.81 in)
Ø 5,08 mm 19,05 mm
mm
(1 in)
(1.38 in) (Ø 0.2 in) (0.75 in)
(1.25 in)
57 mm
(2.24 35
in) mm
(1.38 in) GS 2 GS 4
57 mm
(2.24 in)
5 0 1 6 0 a
TRAVEL TRAVEL
7 3 7 0 0 a
(0.16 in)
4 mm
Advantages:
• High wear resistance
• High speeds
14,3 mm
(0.56 in)
25,4 mm
• Exceptional durability mm
(1 in)
1 1 4 5 0 a 1874 GV
www.SystemPlastSmartGuide.com SIDEFLEXING PLASTIC PLATE TOP CHAINS WITH SNAP ON GRIPPER
e Co
nanc nstr
ucti
Maint
on
ALL
11450a
App
als
cat
(0.98 in)
9,5 mm
M at
e ri
25 mm
io n
li
17 mm (0.67 in)
(0.37 in)
(0.28 in)
7 mm
(0.12 in)
3,1 mm
14,35 mm
(0.57 in)
31,8 19,05 mm
mm
23,8 mm
(0.94 in)
(0.83 in)
21 mm
(1.25 in) (0.75 in)
Ø 5,08 mm
35 mm
(Ø 0.20 in)
(1.38 in)
56,5 mm Ø 11,91 mm
(2.22 in) (Ø 0.47 in)
12,7 mm
(0.5 in)
L
R,
5 0 1 6 0 a
TRAVEL
Application:
Elevating and lowerating conveyors.
Characteristics:
Gripper pads are utilized for a wide range of applications due to their unique mechanical properties.
They offer users high laceration and abrasion resistance, good resistance to deformation and excellent
resistance to fatigue and heat.
Note:
ANSI 60 roller chain
3,15 mm
(0.94 in)
(0.12 in)
(0.36 in)
9,1 mm
Ø 3,97 mm
11,5 mm
(0.45 in)
19 mm
1 1 4 6 0 a (0.75 in)
843 - 845
(0.16 in)
www.SystemPlastSmartGuide.com STRAIGHT RUNNING PLATE TOP CHAINS WITH BASE ROLLER (PITCH ½” - 12,7 mm)
12,7 mm
(0.5 in) e Co
nanc nstr
ucti
Maint
RD 90 mm
on
23,8 mm RD 120 mm ALL
11460a
3,15 mm
(0.94 in)
(0.12 in)
App
als
(0.36 in)
9,1 mm
Ø 3,97 mm Ø 3,97 mm cat
11,5 mm
11,5 mm
(0.45 in)
(0.45 in)
19 mm
M at
e ri
io n
li
(0.16 in) R4
(0.75 in) (Ø 0.16 in)
12,7 mm 12,7 mm
(0.5 in) (0.5 in)
Advantages: Ø 7,95 mm
23,7 mm
• High speed RD 90 mm (Ø 0.31 in)
(0.93 in)
• Low noise (RD 3.54 in) 1,7 mm
(0.07 in)
7,85 mm
(0.31 in)
• Small pitch Ø 3,97 mm
11,5 mm
(0.45 in) R4
• Reduced chordal effect (Ø 0.16 in)
• Reduced sprocket diameter TRAVEL
L
• Easy maintenance
12,7 mm
• Plastic flights removable
(0.5 in)
• High loads Note: ANSI 40 roller chain Ø 7,95 mm
23,7 mm
MATERIAL (Ø 0.31 in)
BREAKING
ITEM DESCRIPTION (0.93 LOAD
in) WIDTH L WEIGHT
ROLLER CHAIN TOP PLATE 1,7
N mm lbs mm in Kg/m lbs/ft.
(0.07 in)
7,85 mm
(0.31 in)
STRAIGHT RUNNING PLATE TOP CHAINS WITH BASE ROLLER (PITCH ¾” - 19,05 mm)
14,3 mm
(0.56 in)
19,05 mm
(0.75 in)
36,5 mm
(1.44 in) Ø 11,91 mm
Ø 5,94 mm RD=115 mm
(0.16 in)
(Ø 0.47 in)
4 mm
12,7 mm
(0.5 in)
Less dust than with acetal chains conveyor lengths and faster speeds are possible.
12,7 mm
(0.5 in)
1 1 4 7 0 a 1843
www.SystemPlastSmartGuide.com SIDEFLEXING OVERLAPPING PLATE TOP CHAINS WITH BASE ROLLER
(PITCH ½” - 12,7 mm)
e Co
RD = 50 mm nanc nstr
(0.13 in)
e
(RD = 1.97 in)
3,2 mm
(0.37 in)
ucti
Maint
14,5 mm
9,5 mm
(0.57 in)
(0.43 in)
Ø 3,45 mm
on
11 mm
(Ø 0.14 in)
ALL
11470a
App
als
cat
M at
e ri
io n
li
20 mm 12,7 mm Advantages:
(0.79 in) (0.5 in) • Small pitch.
Ø 7,95 mm
7,95 mm
(0.31 in)
22,3 mm
(Ø 0.31 in) • Small sprocket diameter and chordal
(0.88 in)
31 mm effect.
(1.22 in) • Continuous flat conveying
L
surface.
Nolu®-S curves Note:
TRAVEL R.
are strongly recommended ANSI 40 roller chain
with these chains!
MATERIAL BREAKING LOAD WIDTH L R WEIGHT
ITEM DESCRIPTION
ROLLER CHAIN TOP PLATE N lbs mm in. mm in. Kg/m lbs/ft.
LF1843TAB-K125 LF 31,8 1 1/4 0,7 0.5
C45 13000 2930
LF1843TAB-K200 Brown 50,8 2 0,9 0.6
254 10
LF1843SS-TAB-K125 LF 31,8 1 1/4 0,7 0.5
Austenitic 10000 2250
LF1843SS-TAB-K200 Brown 50,8 2 0,9 0.6
Standard length: 240 pitches (10 Ft - 3,048 m) - 120 flights
1873 TAB
SIDEFLEXING PLATE TOP CHAINS WITH BASE ROLLER (PITCH ¾” - 19,05 mm)
RD = 150 mm
(0.16 in)
20,6 mm
(0.81 in)
Ø 5,08 mm
4 mm
14,3 mm
(0.56 in)
VG
(0.67 in)
19,05 mm
17 mm
11420a
Nolu®-S curves GS
are strongly recommended Ø 11,91 mm Gripper
with these chains! Ø (0.47 in)
1 1 4 9 0 a 1863 TAB
www.SystemPlastSmartGuide.com SIDEFLEXING OVERLAPPING PLATE TOP CHAINS WITH BASE ROLLER
(PITCH ¾” - 19,05 mm)
e Co
nanc nstr
ucti
Maint
on
ALL
11490a
App
als
cat
M at
e ri
RD = 150 mm io n
li
SC (RD = 5.9 in)
14,35 mm
(0.57 in)
(0.16 in) 22,9 mm
(0.67 in)
4 mm
Ø 5,08 mm
17 mm
(0.9 in) (Ø 0.2 in)
19,05 mm
25,4 mm
21,4 mm
(0.84 in)
32,1 mm
(1 in)
L
12,7 mm
(0.5 in)
NG evo conveyor components
®
Advantages:
• Overlapping flights reduce gap between flights and assure better product stability
• Improved safety because of the reduced flights gap on both the straight and curved sections of the conveyor Note:
• Interchangeable with 1873 series ANSI 60 roller chain
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
21,2 mm
(0.47 in)
(0.83 in)
12 mm
57 mm 50 mm
e Co
nanc nstr
(2.28 in) (1.97 in)
(0.94 in)
24 mm
e
(0.16 in)
ucti
Maint
4 mm
on
ALL
11530a
Ø8 mm
App
als
(Ø 0.32 in)
cat
M at
Min. opening gap in curves
e ri
io n
li
for improved safety
37 m in)
m
55,5 9 in)
SAFETY CHAIN
6
mm
(1.4
(2.1
R.
TRAVEL
(0.12 in)
Lower friction than acetal
0.45 in)
3 mm
57 mm
Good chemical resistance (2.28 in)
High abrasion resistance
(0.94 in)
24 mm
(1.42 in)
55 mm
36 mm
R.
TRAVEL
57 mm
(2.28 in)
(0.98 in)
25 mm
Ø 8 mm 50 mm
(Ø 0.32 in) (1.97 in)
53,5 mm
(2.1 in)
(1.5 in)
38 mm
R.
Pin Material:
TRAVEL Austenitic Stainless Steel
NGE1702 NGE Grey Blue 8600 1900 150 5.9 1,4 0.9
LF1702 LF Brown 9500 2100 150 5.9 1,4 0.9
LFG1702 LFG Grey 9500 2100 150 5.9 1,4 0.9
1 1 5 5 0 a LFW1702 LFW White 9500 2100 150 5.9 1,4 0.9
(0.18 in)
4,5 mm
57 mm
(2.28 in)
(0.24 in)
6 mm
(0.98 in)
25 mm
66 mm
Ø 8 mm 50 mm
(2.6 in)
(Ø 0.32 in) (1.97 in)
(1.42 in)
(2.17 in)
36 mm
55 mm
R.
TRAVEL
dimensions as 1700 series but include TAB LF1701-TAB LF Brown 9500 2100 150 5.9 1,4 0.9
configuration to hold down chains especially in curves. LFW1701-TAB LFW White 9500 2100 150 5.9 1,4 0.9
Standard length: 61 pitches (10 ft. - 3,050 m)
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 5 4 0 a 1710
www.SystemPlastSmartGuide.com MULTIFLEX CHAINS
e Co
nanc nstr
ucti
Maint
on
ALL
11540a
(0.16 in)
22,5 mm
(0.89 in)
58 mm
4 mm
App
als
(2.29 in) cat
M at
e ri
io n
li
34,5 mm
(1.36 in)
(0.94 in)
24 mm
55 mm Ø 8 mm 50 mm
(2.17 in) (Ø 0.32 in) (1.97 in)
(0.16 in)
22,5 mm
(0.89 in)
15,5 mm
(0.61 in)
4 mm
58 mm
(2.28 in)
34,5 mm
(1.36 in)
36 mmin)
24 mm
(1.42 in)
(0.94
L
(0.32 in)
50 mm
8 mm
Ø 8 mm
55 mm
(Ø 0.32 in) (1.97 in)
R
(2.17 in)
67,5 mm
(2.66 in)
(1.42 in)
36 mm
L
5 0 1 7 0 a
R
1 1 5 5 0 a TRAVEL
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
11550a
11,1 mm
App
als
50 mm
cat
M at
e ri
New design io n
li
3 0 9 9 0 a
S+ 1
+0
Features:
• Very high strength.
Ø OD
ØM
• Split versions: quick and easy replacement.
• Foolproof design.
11,1 mm
• Completely closed structure, easy to clean
50 mm and to disinfect.
DF 45 mm • Excellent wear and chemical resistance.
• Recyclable.
S+ 1
+0
50 mm 11,1 mm
ØM Ø 23* Ø 25 Ø 30 Ø 35 Ø 40 Ø OD S
Z Z
mm ITEM DESCRIPTION mm mm
S+1
+0
Material: polyamide (natural white); screws in stainless steel, bushings in brass, DIN 6885 key seat. *Plain bore
50 mm 11,1 mm
1700-1702-1701 TAB-1706
1 1 5 3 0 a
Ø OD
ØM
1710-1713
1 1 5 4 0 a
DF 45 mm
ØM Ø 25 Ø 30 Ø 35 Ø 40
Z mm ITEM DESCRIPTION
8 85 1700-8R25M-RM 1700-8R30M-RM 1700-8R35M-RM 1700-8R40M-RM
50 mm
10 110 1700-10R25M-RM 1700-10R30M-RM 1700-10R35M-RM 1700-10R40M-RM
Material: polyamide (natural white).
S+ 1
+0
50 mm 11,1 mm
S+ 1
+0
11,1 mm
Ø OD
ØM
DF
50 mm
Ø OD
ØM
DF
42 mm
S+ 1
+0
50 mm
ØM Ø 25 Ø 30
Z mm ITEM DESCRIPTION
8 55 1700-8R25M-D DF 1700-8R30M-D
Revision 001
10 65 1700-10R25M-D 1700-10R30M-D
Material: reinforced polyamide (black); hub in brass (Z-10 only). DIN 6885 key seat.
DF
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
1 - Turning disk. nanc nstr
ucti
Maint
2 - Single race radial ball bearing with two sliding seals,
on
ALL
11560a
App
als
3 - External (retaining) ring, Ø 25 DIN 471. cat
M at
e ri
io n
li
4 - Seal ring with dust cover, 25x47x7 DIN 3760 (NBR rubber).
5 - Internal (retaining) ring, Ø 47 DIN 472.
6 - Bearing spacer.
7 - Seal ring with dust cover, 25x35x7 DIN 3760 (NBR rubber).
Molded version
Ø 247 mm
Ø 55 mm
16 mm
32,2 mm
20 mm
Colour: black.
h1
TURNING DISK
32,2
ITEM DESCRIPTION
CLOSED
VERSION 1700-300R25M-RC
8,8 mm
Ø 247 mm
16 mm
Ø 55 mm
1
16 mm
h1 32,2 mm
7 Colour: black.
3
17 mm
32,2 mm
6 4 ITEM DESCRIPTION
2 5 TURNING DISK
OPEN VERSION
H = H1 + 32,2 Ø 25 mm h7 1701T-300R25M-RB
150 mm
Multiflex chains
1 1 5 3 0 a
Revision 001
1 1 5 4 0 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
28,5 mm
(1.12 in)
e
63,5 mm Ø 11 mm
ucti
Maint
on
(2.5 in) (Ø 0.43 in) ALL
11570a
App
als
cat
M at
e ri
io n
li
14,5 mm
(0.57 in)
L
(1.65 in)
42 mm
TRAVEL
R.
28,5 mm
(1.12 in)
63,5 mm Ø 11 mm
(0.67 in)
17 mm
(2.5 in) (Ø 0.43 in)
14,5 mm
(0.57 in)
LK L
(1.65 in)
42 mm
NG evo conveyor components
®
R.
Good chemical resistance
High abrasion resistance
Pin Material: Austenitic Stainless Steel
It meets the requirement for materials as BREAKING
stated by EC1935/2004 and FDA CFR21 ITEM MATERIAL R MIN. L LK WEIGHT
LOAD
norms for direct food contact DESCRIPTION
Less dust than with acetal chains LINK PIN mm N lbs in mm in mm in Kg/m lbs/ft.
More......... NGE600 NGE - - 1,3 0.9
SS 12500 2812 650 25.6 90 3.54
NGE600TAB Grey Blue 54 2.13 1,5 1.0
LFW600 W - - 1,3 0.9
1 1 5 8 0 a LFW600TAB White
SS 14000 3150 650 25.6 90 3.54
54 2.13 1,5 1.0
63,5 mm Ø 11 mm
(2.5 in) (Ø 0.43 in)
(0.14 in)
3,5 mm
14,5 mm
(0.57 in)
(1.65 in)
42 mm
90 mm
R.
63,5 mm Ø 11 mm
(0.67 in)
17 mm
90 mm
54 mm
(2.13 in) (3.54 in)
(1.65 in)
42 mm
R.
TRAVEL
e
(2.5 in) (Ø 0.43 in)
ucti
Maint
28,5 mm
on
(1.12 in)
ALL
11580a
App
als
cat
M at
e ri
io n
li
14,5 mm
(0.57 in)
L
(1.65 in)
42 mm
TRAVEL
R.
63,5 mm Ø 11 mm
14,25 mm
(0.56 in)
(2.5 in) (Ø 0.43 in)
(1.22 in)
31 mm
90 mm
(0.67 in)
17 mm
(3.54 in)
(2.13 in)
(1.65 in)
42 mm
54 mm
TRAVEL
R.
Pin Material: Austenitic Stainless Steel
MATERIAL BREAKING LOAD R MIN. WEIGHT
ITEM DESCRIPTION LINK N lbs mm in Kg/m lbs/ft.
LFW600F W
14000 3150 700 27.6 1,4 0.9
LFW631TAB White
Standard length: 48 pitches (10 ft. - 3,048 m)
12 600-12R23M-RM - -
Ø OD
ØP
DF
Ø OD ØP 14 600-14R23M-RM - -
Z mm mm
MACHINED DRIVE SPROCKETS - SPLIT
6 125.5 127 FIXED
8 172 166
8 - - 600-8R40M-DMS
10 215 205 50 mm
10 - 600-10R30M-DMS 600-10R40M-DMS
12 256 246
14 297 286 MACHINED RETURN SPROCKETS - SPLIT
10 - 600-10R30M-RMS -
Revision 001
ucti
Maint
on
82,5 mm Ø 9,5 mm ALL
11590a
19,25 mm
(0.76in)
App
als
(3.25 in) (Ø 0.37 in)
cat
M at
e ri
io n
li
38,5 mm
(1.52 in)
(1.97 in)
50 mm
118,5 mm
TRAVEL
(4.67 in)
R.
82,5 mm Ø 9,5 mm
19,25 mm
19,25 mm
(0.76in)
(3.25 in) (Ø 0.37 in)
(1.52 in)
38,5 mm
82,5 mm Ø 9,5 mm
19,25 mm
19,25 mm
(0.76in)
(1.69 in)
43 mm
65,5 mm
(1.10 in)
(1.97 in)
(2.58 in)
28 mm
50 mm
118,5 mm
NG evo conveyor components
®
TRAVEL
R.
made from engineered plastic resin (4.67 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance BREAKING
MATERIAL R MIN. WEIGHT
High abrasion resistance ITEM DESCRIPTION LOAD
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
LINK PIN N lbs mm in Kg/m lbs/ft.
norms for direct food contact LFW1400 3,2 2.2
Less dust than with acetal chains W
LFW1400TAB SS 18000 4050 660 26 3,4 2.3
More......... White
LFW1431TAB 3,4 2.3
NGE1400 3,2 2.2
NGE
NGE1400TAB SS 16200 3600 660 26 3,4 2.3
Grey Blue
NGE1431TAB 3,4 2.3
Pin Material: LFW1400R 3,2 2.2
W SSR
SS: Ferritic Stainless Steel LFW1400R-TAB 18000 4050 660 26 3,4 2.3
White Riveted
SSR: Austenitic Stainless Steel Riveted LFW1431R-TAB 3,4 2.3
NGE1400R 3,2 2.2
NGE SSR
NGE1400R-TAB 16200 3600 660 26 3,4 2.3
Grey Blue Riveted
Breaking Load according to NGE1431R-TAB 3,4 2.3
Standard ISO 4348 - DIN 8153 Standard length: 37 pitches (10 ft. - 3,053 m)
Ø 20* Ø 30 Ø 40
Revision 001
ITEM DESCRIPTION
1400-10R20M-R 1400-10R30M-D 1400-10R40M-D
Material: hub: polyamide (natural white); ring: reinforced polyamide
(black) high impact. *Plain bore
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL11600a
App
als
cat
M at
e ri
io n
li
82,5 mm Ø 9,5 mm
19,5 mm
(0.77 in)
(3.25 in) (Ø 0.37 in)
38,5 mm
(1.52 in)
118,5 mm TRAVEL
R.
(4.67 in)
82,5 mm Ø 9,5 mm
19,5 mm
19,5 mm
(Ø 0.37 in)
(0.77 in)
(0.77 in)
(3.25 in)
38,5 mm
(1.52 in)
65,5 mm
(2.58 in)
(1.97 in)
(1.10 in)
28 mm
50 mm
R.
118,5 mm
TRAVEL
(4.67 in)
RETURN SPROCKETS
FOR CRATE CONVEYOR CHAINS
Features:
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
15 mm
MACHINED RETURN
SPROCKETS ONE PIECE
PRE-BORE
Ø OD
Ø 23*
ØP
ØM
Ø OD ØP ØM
Z mm mm mm ITEM DESCRIPTION
8 227,6 218 90 1400V-8R23M-RM
10 279 267 125 1400V-10R23M-RM
Revision 001
1 1 6 0 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
Details , go to:
3 0 4 2 0 a
Imperial 2080
8 30025a
(1/3”)
6 - - - -
3 0 0 2 7 a 3 0 0 2 5 a
3 0 1 6 0 a 3 0 0 5 0 a 3 0 0 7 0 a 3 0 1 0 0 a 3 0 1 1 0 a 3 0 1 2 0 a
Metric 2122
100 30073a
- - - -
3 0 1 6 6 a 3 0 0 7 3 a
12,7
8,7
(½”)
Imperial 2121
30055a
- - - -
3 0 0 5 5 a
3 0 1 6 0 a 3 0 0 3 0 a
Metric 2124
30020a
- - -
3 0 1 6 5 a 3 0 0 3 0 a 3 0 0 9 0 a
Imperial 2190
19,05 30190a
(¾”)
8,7 - - -
3 0 2 1 0 a 3 0 2 3 0 a
3 0 2 3 5 a 3 0 2 0 0 a 3 0 2 2 0 a
Flights
Metric 2250
30300a
-
3 0 3 2 5 a 3 0 3 6 0 a 3 0 3 7 0 a
25,4
3 0 3 9 5 a 3 0 3 1 0 a 3 0 3 4 0 a 3 0 3 6 5 a
8,7
(1”) Roller top
Imperial 2253
30330a
- - -
3 0 3 9 5 a 3 0 3 3 0 a 3 0 3 9 8 a
Revision 001
Metric 2251
30410a
- -
3 0 4 4 0 a 3 0 4 9 0 a 3 0 5 0 0 a
25,4 3 0 5 5 0 a 3 0 4 2 0 a
12,7
(1”)
Imperial 2252
30410a
- - -
3 0 4 4 5 a 3 0 4 8 1 a
3 0 5 5 0 a 3 0 4 2 0 a
Draining Top
Metric 2502
30617a
12,7 - - - -
3 0 6 1 8 a 3 0 6 1 7 a
Raised rib
Imperial 2500
30610a
50,8 (2”) 16 - - - -
3 0 6 1 5 a 3 0 6 1 0 a
Anti-slip surface
Metric 2508 152,4 mm
30620a
(6 in)
22 - - - -76,2 mm
(3 in)
3 0 6 4 0 a 3 0 6 2 0 a
Anti-slip surface
Metric 2630
30645a
63,5
(2.½”)
30 - - - -
3 0 6 5 0 a 3 0 6 4 5 a
2120
12,7 Metric
30020a
8,7 - - - -
(½”)
3 0 1 6 0 a 3 0 7 2 0 a
25,4
3 0 7 1 5 a 3 0 7 1 0 a
8,7
(1”)
2260
Magnetic 30700a
chainbelt - - - -
3 0 7 1 5 a 3 0 7 0 0 a 3 0 7 0 0 a
2251
Magnetic 30700a
chainbelt - - - -
3 0 7 1 5 a 3 0 7 0 0 a
25,4 12,7
(1”)
TAB 2251 TAB
chainbelt 30710a
- - - -
3 0 7 1 5 a 3 0 7 1 0 a
Imperial 2256
25,4 30728a
12,7 - - -
(1”)
3 0 7 4 0 a 3 0 7 3 0 a 3 0 7 3 5 a
2351
2451
Metric 2551
31,75 12,7 2651 - - -
(1¼”) 30728a
3 0 7 4 5 a 3 0 7 5 5 a
3 0 7 6 0 a
(0.34 in)
8,7 mm
2120 FT
2121 FT
2124 FT
3 0 0 5 0 a 3 0 0 5 5 a 3 0 0 3 0 a
FLAT TOP VERSION WITH TRANSFER WING
2120 FT
with transfer wing
3 0 0 4 5 a
3 0 0 7 0 a 3 0 0 7 3 a
VERSIONS WITH RUBBER INSERTS
2120 VG 2124 VG / 2121 VG 2120 VGS
3 0 1 0 0 a 3 0 0 9 0 a 3 0 1 0 5 a
VERSION WITH ACCUMULATION ROLLERS
Can be used with a Nose bar
to create extremely short transfers.
2120 LBP
3 0 1 1 0 a
GB 2120
3 0 1 2 0 a
2120 M
FLOWFLEX™ BELTS
3 0 7 2 0 a
ucti
Maint
on
LFB
ALL
30025a
App
als
cat
M at
e ri
io n
li
W
152,4 mm
(6 in)
6 mm
76,2 mm
(0.23 in)
(3 in)
R 3 mm
(R 0.1 in)
NG evo conveyor components
®
(0.315 in)
3 mm
8 mm
Lower friction than acetal
(0.1 in)
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
3 0 0 2 7 a
WIDTH W ITEM DESCRIPTION
mm in NGE (GREY BLUE) LFB (BLUE)
Can be used with a Nose bar 76 3.00 NGE2080FT-K300 LFB2080FT-K300
to create extremely short transfers. 152 6.00 NGE2080FT-K600 LFB2080FT-K600
229 9.00 NGE2080FT-K900 LFB2080FT-K900
305 12.00 NGE2080FT-K1200 LFB2080FT-K1200
381 15.00 NGE2080FT-K1500 LFB2080FT-K1500
457 18.00 NGE2080FT-K1800 LFB2080FT-K1800
page code: 3 0 0 2 9 a 533 21.00 NGE2080FT-K2100 LFB2080FT-K2100
610 24.00 NGE2080FT-K2400 LFB2080FT-K2400
686 27.00 NGE2080FT-K2700 LFB2080FT-K2700
762 30.00 NGE2080FT-K3000 LFB2080FT-K3000
838 33.00 NGE2080FT-K3300 LFB2080FT-K3300
Information about
this product is only 914 36.00 NGE2080FT-K3600 LFB2080FT-K3600
available on our 991 39.00 NGE2080FT-K3900 LFB2080FT-K3900
Smart Guide® 1067 42.00 NGE2080FT-K4200 LFB2080FT-K4200
website. 1143 45.00 NGE2080FT-K4500 LFB2080FT-K4500
1219 48.00 NGE2080FT-K4800 LFB2080FT-K4800
Standard materials
1295 51.00 NGE2080FT-K5100 LFB2080FT-K5100
NGE (GREY BLUE) 1372 54.00 NGE2080FT-K5400 LFB2080FT-K5400
1448 57.00 NGE2080FT-K5700 LFB2080FT-K5700
New Generation® 1524 60.00 NGE2080FT-K6000 LFB2080FT-K6000
Also available into 1600 63.00 NGE2080FT-K6300 LFB2080FT-K6300
1676 66.00 NGE2080FT-K6600 LFB2080FT-K6600
LFB (BLUE) POM-AS (BLACK)
1753 69.00 NGE2080FT-K6900 LFB2080FT-K6900
Low friction acetal 1829 72.00 NGE2080FT-K7200 LFB2080FT-K7200
Anti-static acetal
resin 1905 75.00 NGE2080FT-K7500 LFB2080FT-K7500
1981 78.00 NGE2080FT-K7800 LFB2080FT-K7800
Revision 001
3 0 0 2 7 a DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR BELT 2080
e Co
nanc nstr
ucti
Maint
Features:
on
ALL
30027a
App
als
• Foolproof design. cat
M at
e ri
io n
li
• Completely closed structure, easy to clean and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
See 8 mm (1/3”)
pitch belts: Set collars, go to:
3 0 0 2 5 a 5 4 6 3 0 a
S+ 1
+0
Ø 30
Z
ITEM DESCRIPTION
24 2080-24R30M-DM
DF
25 mm
MACHINED DRIVE SPROCKETS - SPLIT
6 mm FIXED
Ø 20 Ø 25 Ø 30
S+ 1
+0
Z
ITEM DESCRIPTION
24 2080-24R20M-DMS 2080-24R25M-DMS -
Ø OD
ØP
32 - 2080-32R25M-DMS 2080-32R30M-DMS
36 - 2080-36R25M-DMS 2080-36R30M-DMS
DF
MACHINED RETURN SPROCKETS - SPLIT
36 - 2080-36R25M-RMS 2080-36R30M-RMS
Material: polyamide (natural white), screws in stainless steel, nuts in zinc plated steel.
S+ 1
+0
Ø OD
ØP
Ø OD ØP S
Z
mm mm mm
24 60,6 61,3 28
32 81,0 81,6 38
DF
36 90,4 91,8 43,5
S+ 1
+0
25 mm
FLOATING
ØP
6 mm
30X30
Z
ITEM DESCRIPTION
DF 24 2080-24S30M-DM
32 2080-32S25M-DMS 2080-32S30M-DMS -
36 - 2080-36S30M-DMS 2080-36S40M-DMS
Revision 001
Material: polyamide (natural white), screws in stainless steel, nuts in zinc plated steel.
DF
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
W= 228,6 mm
on
W= 228,6 mm
(W= 9 in) ALL
30029a
App
62 mm 62 mm
als
(W= 9 in) cat
M at
e ri
(2.44 in) (2.44 in) io n
li
62 mm 62 mm
(2.44 in) (2.44 in)
6,5 mm
(0.26 in)
6,5 mm
(0.26 in)
W= 152,4 mm
(W= 6 in)
W= 152,4 mm
(W= 6 in) 62 mm
(2.44 in)
62 mm
(2.44 in)
6,5 mm
(0.26 in)
6,5 mm
(0.26 in)
c li c k f
W= 76,2 mm
or (W= 3 in)
vid e o W= 76,2 mm
(W= 3 in) Sagline angle
6,5 mm
Can be used with a Nose bar (0.26 in)
to create extremely short transfers. 6,5 mm
MIN.
15
(0.26 in)
.
MAX
28
3,25 mm
(0.13 in)
3,25 mm
(0.13 in)
10 mm 16 mm
2,75 mm
(0.24 in)
(0.11 in)
mmmm
in) in)
10 mm 16 mm
30 mm
(0.11(0.62
(0.24 in)
2,7515,7
15,7 mm
(0.62 in)
30 mm
with 1/3" - 8 mm pitch: (1.18 in)
50,7 mm
(2 in)
3 0 0 2 5 a 50,7 mm
(2 in)
PATENTED
Note:
1,2 m nose bar is supplied WITHOUT holes
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30030a
App
als
-0 -0
W=34 -0.3 mm 8,7 mm W=51 -0.3 mm 8,7 mm cat
M at
W
e ri
io n
li
-0 (0.34 in) -0 (0.34 in)
(W=1.34 -0.01 in) (W=2 -0.01 in)
(R 0.4 in)
(R 0.4 in)
R 9,5 mm
R 9,5 mm
12,7 mm
12,7 mm
(0.5 in)
(0.5 in)
NG evo conveyor components
®
(R 0.4 in)
12,7 mm
12,7 mm
(0.5 in)
(0.5 in)
4,35 mm 4,35 mm
(0.17 in) K 200 to K750 (0.17 in)
Pin material: PBT (white)
WIDTH W BACKFLEX RADIUS MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in N lbs Kg/m lbs/ft.
NGE2121FT-K200 51 2 680 150 0,45 0.30
NGE2121FT-K300 76,2 3 1370 300 0,7 0.47 3 0 1 6 0 a
NGE2121FT-K325 82,6 3.25 1490 330 0,7 0.47
NGE
NGE2120FT-K330 83,8 3.3 10 0.39 1490 330 0,7 0.47
Grey Blue
NGE2121FT-K450 114,3 4.5 2060 460 1 0.67
NGE2121FT-K600 152,4 6 2750 610 1,3 0.87
NGE2121FT-K750 190,5 7.50 3430 760 1,7 1.14
Standard length: 240 pitches (3,048 m - 10 ft.)
30060b
materials details: page code: 3 0 1 7 5 a
30045a 30110a 30120a 30720a 7 3 5 6 3 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30030b
App
als
cat
M at
e ri
3,9 mm 3,9 mm
io n
li
(0.15 in) (0.15 in)
19,8 mm 35,8 mm 3,9 mm
(0.78 in) (1.41 in) L (0.15 in)
-0 -0
W=34 -0.3 mm 5,4 mm 8,7 mm W=51 -0.3 mm 5,4 mm 8,7 mm
W
NG evo conveyor components
® -0
(W=1.34 -0.01 in)
(0.21 in) (0.34 in) -0
(W=2 -0.01 in) (0.21 in) (0.34 in)
made from engineered plastic resin
R 9,5 mm
(R 0.4 in)
R 9,5 mm
(R 0.4 in)
Longer wearlife than acetal
7 3 7 0 0 a 12,7 mm
12,7 mm
Lower friction than acetal (0.5 in)
(0.5 in)
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
4,35 mm 4,35 mm
Less dust than with acetal chains K 134 (0.17 in) (0.17 in)
More.........
-0
W=51 -0.3 mm 5,4 mm 8,7 mm 5,4 mm 8,7 mm
-0
W
(W=2 -0.01 in) (0.21 in) (0.34 in) (0.21 in) (0.34 in)
R 9,5 mm
R 9,5 mm
(R 0.4 in)
(R 0.4 in)
12,7 mm
12,7 mm
(0.5 in)
(0.5 in)
4,35 mm 4,35 mm
(0.17 in) (0.17 in)
Pin material: PBT (white) K 200 to K750
L WIDTH W BACKFLEX RADIUS MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in mm in N lbs Kg/m lbs/ft.
NGE2121FT-PT-K200 35,8 1.41 51 2 680 150 0,45 0.3
NGE2121FT-PT-K300 43,1 1.7 76,2 3 1370 300 0,7 0.47
NGE2121FT-PT-K325 43,1 1.7 82,6 3.25 1490 330 0,7 0.47 3 0 1 6 0 a
NGE
NGE2120FT-PT-K330 42,1 1.66 83,8 3.3 10 0.39 1490 330 0,7 0.47
Grey Blue
NGE2121FT-PT-K450 43,1 1.7 114,3 4.5 2060 460 1 0.67
NGE2121FT-PT-K600 43,1 1.7 152,4 6 2750 610 1,3 0.87
NGE2121FT-PT-K750 43,1 1.7 190,5 7.5 3430 760 1,7 1.14
Standard length: 240 pitches (3,048 m - 10 ft.)
ucti
Maint
(2.48 in)
on
ALL
30045a
App
als
cat
M at
e ri
io n
li
3,9 mm R 80 mm
42,1 mm (R 3.15 in)
(0.15 in)
(1.66 in)
W = 83,8 mm
(W = 3.3 in)
R 9,5 mm
(R 0.4 in)
Longer wearlife than acetal
7 3 7 0 0 a
12,7 mm
(0.5 in)
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact 4,35 mm
Less dust than with acetal chains (0.17 in)
More.........
Wider versions
3,9 mm R 80 mm
42,1 mm (R 3.15 in)
(0.15 in)
W (1.66 in)
Wt = W + 24,6 mm
4,35 mm
(0.17 in)
WIDTH W
ITEM DESCRIPTION
mm in
85 3.35 NGE2120FT-PT-M0085T Backflex radius: 15 mm (0.59 in)
170 6.69 NGE2120FT-PT-M0170T Max load capacity: 18000 N/m (1260 lbs/ft.)
255 10.04
Weight: 8,6 Kg/m2 (1.75 lbs/ft2.)
NGE2120FT-PT-M0255T
Pin material: PBT (white)
340 13.39 NGE2120FT-PT-M0340T Standard length:
425 16.73 NGE2120FT-PT-M0425T width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
510 20.08 NGE2120FT-PT-M0510T width > 340 mm (13.39 in): 1,524 m (5 ft.)
Other widths available on request.
ucti
Maint
LFB
on
ALL
30050a
App
als
LFG cat
M at
e ri
W io n
li
170 mm
(6.69 in)
85 mm 8,7 mm
(3.35 in) (0.34 in)
R 9,5 mm
(R 0.4 in)
12,7 mm
(0.5 in)
NG evo conveyor components
®
ucti
Maint
on
ALL
30055a
App
als
cat
M at
e ri
io n
li
W
152,4 mm 8,7 mm
(6.in) (0.34 in)
76,2 mm
(3 in)
R 9,5 mm
(R 0.4 in)
12,7 mm
made from engineered plastic resin
(0.5 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance 4,35 mm
It meets the requirement for materials as (0.17 in)
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
WIDTH W
ITEM DESCRIPTION
mm in
76 3.00
page code: 3 0 1 7 5 a 152 6.00
Go to: 3 0 0 3 0 a
229 9.00 NGE2121FT-K900
Notes: 305 12.00 NGE2121FT-K1200
Schematic presentation of all
381 15.00 NGE2121FT-K1500
flat top 12,7 mm (½”) pitch belts
457 18.00 NGE2121FT-K1800
30030a 30030b 30045a
533 21.00 NGE2121FT-K2100
610 24.00 NGE2121FT-K2400
30050a
686 27.00 NGE2121FT-K2700
30060a
762 30.00 NGE2121FT-K3000
30060a 838 33.00 NGE2121FT-K3300
30060b
914 36.00 NGE2121FT-K3600
991 39.00 NGE2121FT-K3900
30060b
1067 42.00 NGE2121FT-K4200
30045a
3 0 1 6 0 a
1143 45.00 NGE2121FT-K4500
1219 48.00 NGE2121FT-K4800
Other versions 85 mm 1295 51.00 NGE2121FT-K5100
for 12,7 mm (½”) belts: 1372 54.00 NGE2121FT-K5400
(3.35 in) Information about this
FG VG 1448 57.00 NGE2121FT-K5700
Flush grid Rubber insert product is only available on our
Smart Guide® website. 1524 60.00 NGE2121FT-K6000
1600 63.00 NGE2121FT-K6300
Standard material 1676 66.00 NGE2121FT-K6600
30070a 30100a NGE (GREY BLUE) 1753 69.00 NGE2121FT-K6900
LBP GB Also available with 1829 72.00 NGE2121FT-K7200
Sideflex
(low pressure) (Guide bar)
85 mm (3.35 in) New Generation® 1905 75.00 NGE2121FT-K7500
modules. Go to: 1981 78.00 NGE2121FT-K7800
Revision 001
ucti
Maint
on
ALL
30060a
App
als
cat
M at
e ri
io n
li
2120 FT-P
3,9 mm
63,2 mm
(0.15 in)
(2.5 in)
5,4 mm 8,7 mm
(0.21 in) (0.34 in)
NG evo conveyor components
®
2120 FT-P2
R 9,5 mm
(R 0.4 in)
made from engineered plastic resin
12,7 mm
(0.5 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance 3,9 mm 3,9 mm
It meets the requirement for materials as (0.15 in) (0.15 in)
stated by EC1935/2004 and FDA CFR21 63,2 mm 63,2 mm
norms for direct food contact (2.5 in) (2.5 in) 4,35 mm
Less dust than with acetal chains (0.17 in)
W
More.........
170 mm
(6.69 in)
85 mm
(3.35 in)
Notes: WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION
Schematic presentation of all mm in
flat top 12,7 mm (½”) pitch belts
85 3.35 NGE2120FT-P-M0085 -
30030a 30030b 30045a
170 6.69 NGE2120FT-P-M0170 NGE2120FT-P2-M0170
255 10.04 NGE2120FT-P-M0255 NGE2120FT-P2-M0255
30050a
340 13.39 NGE2120FT-P-M0340 NGE2120FT-P2-M0340
30060a
425 16.73 NGE2120FT-P-M0425 NGE2120FT-P2-M0425
30060a
510 20.08 NGE2120FT-P-M0510 NGE2120FT-P2-M0510
595 23.43 NGE2120FT-P-M0595 NGE2120FT-P2-M0595
30060b
3 0 1 6 0 a
30060b 680 26.77 NGE2120FT-P-M0680 NGE2120FT-P2-M0680
765 30.12 NGE2120FT-P-M0765 NGE2120FT-P2-M0765
30045a
850 33.46 NGE2120FT-P-M0850 NGE2120FT-P2-M0850
935 36.81 NGE2120FT-P-M0935 NGE2120FT-P2-M0935
Other versions
for 12,7 mm (½”) belts: 1020 40.16 NGE2120FT-P-M1020 NGE2120FT-P2-M1020
Information about this
FG VG 1105 43.50 NGE2120FT-P-M1105 NGE2120FT-P2-M1105
product is only available on our
Flush grid Rubber insert Smart Guide® website. 1190 46.85 NGE2120FT-P-M1190 NGE2120FT-P2-M1190
1275 50.20 NGE2120FT-P-M1275 NGE2120FT-P2-M1275
Standard material 1360 53.54 NGE2120FT-P-M1360 NGE2120FT-P2-M1360
30070a 30100a NGE (GREY BLUE) 1445 56.89 NGE2120FT-P-M1445 NGE2120FT-P2-M1445
LBP GB 1530 60.24 NGE2120FT-P-M1530 NGE2120FT-P2-M1530
Sideflex
(low pressure) (Guide bar) 1615 63.58 NGE2120FT-P-M1615 NGE2120FT-P2-M1615
New Generation®
1700 66.93 NGE2120FT-P-M1700 NGE2120FT-P2-M1700
Revision 001
ucti
Maint
on
ALL
30060b
LFG
App
als
3,9 mm
cat
M at
e ri
io n
li
42,1 mm (0.15 in)
(1.66 in)
63,2 mm 5,4 mm 8,7 mm
(2.5 in) (0.21 in) (0.34 in)
R 9,5 mm
(R 0.4 in)
2120FT-PT2
12,7 mm
(0.5 in)
3,9 mm 3,9 mm
42,1 mm (0.15 in) (0.15 in) 42,1 mm
(1.66 in) (1.66 in)
4,35 mm
63,2 mm 63,2 mm (0.17 in)
(2.5 in) (2.5 in)
NG evo conveyor components
®
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in): 1,524 m (5 ft.) 30050a
30060b
ucti
Maint
on
W ALL
30070a
LFG
App
als
cat
M at
e ri
170 mm io n
li
(6.69 in)
85 mm
8,7 mm
(3.35 in)
(0.34 in)
R 9,5 mm
(R 0.4 in)
12,7 mm
(0.5 in)
4,35 mm
(0.17 in)
NG evo conveyor components
®
ucti
Maint
on
ALL
30073a
App
als
cat
M at
e ri
io n
li
W
200 mm
(7.87in)
100 mm 8,7 mm
(3.94 in) (0.34 in)
R 9,5 mm
(R 0.4 in)
NG evo conveyor components
®
12,7 mm
made from engineered plastic resin
(0.5 in)
Longer wearlife than acetal
7 3 7 0 0 a
4,35 mm
Lower friction than acetal (0.17 in)
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
3 0 1 6 6 a
85 mm
Information about this
(3.35 in) product is only available on our WIDTH W
Smart Guide® website. ITEM DESCRIPTION
mm in
Can be used with a Nose bar 100 3.94 NGE2122FG-M0100
Standard material 200 7.87 NGE2122FG-M0200
to create extremely short transfers.
NGE (GREY BLUE) 300 11.81 NGE2122FG-M0300
400 15.75 NGE2122FG-M0400
Also available with
85 mm (3.35 in) New Generation® 500 19.69 NGE2122FG-M0500
modules.Go to: 600 23.62 NGE2122FG-M0600
materials details: page code: 3 0 1 7 5 a 700 27.56 NGE2122FG-M0700
3 0 0 7 0 a
7 3 5 6 3 a 800 31.50 NGE2122FG-M0800
900 35.43 NGE2122FG-M0900
1000 39.37 NGE2122FG-M1000
Notes: Other versions
for 12,7 mm (½”) belts: 1100 43.30 NGE2122FG-M1100
Schematic presentation of all
flush grid 12,7 mm (½”) pitch belts FT VG 1200 47.24 NGE2122FG-M1200
Flat top Rubber insert 1300 51.18 NGE2122FG-M1300
1400 55.12 NGE2122FG-M1400
1500 59.06 NGE2122FG-M1500
30070a
30050a 30100a 1600 62.99 NGE2122FG-M1600
30075a LBP GB 1700 66.93 NGE2122FG-M1700
Sideflex
(low pressure) (Guide bar)
30075a 1800 70.87 NGE2122FG-M1800
1900 74.80 NGE2122FG-M1900
Revision 001
30075b
30075b
2000 78.74 NGE2122FG-M2000
30110a 30120a 30720a 2100 82.68 NGE2122FG-M2100
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30075a
App
als
cat
M at
e ri
io n
li
2120FG-P
3,9 mm
(0.15 in)
63,6 mm
(2.5 in)
5,4 mm 8,7 mm
(0.21 in) (0.34 in)
2120FG-P2
R 9,5 mm
(R 0.4 in)
12,7 mm
(0.5 in)
NG evo conveyor components
®
WIDTH W
Notes: ITEM DESCRIPTION ITEM DESCRIPTION
Schematic presentation of all mm in
flush grid 12,7 mm (½”) pitch belts 85 3.35 -
NGE2120FG-P-M0085
170 6.69 NGE2120FG-P-M0170 NGE2120FG-P2-M0170
255 10.04 NGE2120FG-P-M0255 NGE2120FG-P2-M0255
30070a 340 13.39 NGE2120FG-P-M0340 NGE2120FG-P2-M0340
30075a
425 16.73 NGE2120FG-P-M0425 NGE2120FG-P2-M0425
510 20.08 NGE2120FG-P-M0510 NGE2120FG-P2-M0510
30075a
3 0 1 6 0 a 595 23.43 NGE2120FG-P-M0595 NGE2120FG-P2-M0595
30075b
680 26.77 NGE2120FG-P-M0680 NGE2120FG-P2-M0680
30075b
765 30.12 NGE2120FG-P-M0765 NGE2120FG-P2-M0765
850 33.46 NGE2120FG-P-M0850 NGE2120FG-P2-M0850
935 36.81 NGE2120FG-P-M0935 NGE2120FG-P2-M0935
Other versions
for 12,7 mm (½”) belts: 1020 40.16 NGE2120FG-P-M1020 NGE2120FG-P2-M1020
Information about this
FT VG 1105 43.50 NGE2120FG-P-M1105 NGE2120FG-P2-M1105
product is only available on our
Flat top Rubber insert 1190 46.85 NGE2120FG-P-M1190 NGE2120FG-P2-M1190
Smart Guide® website.
1275 50.20 NGE2120FG-P-M1275 NGE2120FG-P2-M1275
Standard material 1360 53.54 NGE2120FG-P-M1360 NGE2120FG-P2-M1360
30050a 30100a NGE (GREY BLUE) 1445 56.89 NGE2120FG-P-M1445 NGE2120FG-P2-M1445
LBP GB 1530 60.24 NGE2120FG-P-M1530 NGE2120FG-P2-M1530
Sideflex
(low pressure) (Guide bar)
New Generation® 1615 63.58 NGE2120FG-P-M1615 NGE2120FG-P2-M1615
1700 66.93 NGE2120FG-P-M1700 NGE2120FG-P2-M1700
Revision 001
ucti
Maint
on
ALL
30075b
App
als
cat
M at
e ri
io n
li
2120FG-PT
3,9 mm
42,1 mm (0.15 in)
(1.66 in) 5,4 mm 8,7 mm
63,6 mm
(0.21 in) (0.34 in)
(2.5 in)
R 9,5 mm
(R 0.4 in)
2120FG-PT2
12,7 mm
(0.5 in)
NG evo conveyor components
®
WIDTH W
Notes: ITEM DESCRIPTION ITEM DESCRIPTION
Schematic presentation of all mm in
flush grid 12,7 mm (½”) pitch belts 85 3.35 NGE2120FG-PT-M0085 -
170 6.69 NGE2120FG-PT-M0170 NGE2120FG-PT2-M0170
255 10.04 NGE2120FG-PT-M0255 NGE2120FG-PT2-M0255
30070a
340 13.39 NGE2120FG-PT-M0340 NGE2120FG-PT2-M0340
425 16.73 NGE2120FG-PT-M0425 NGE2120FG-PT2-M0425
30075a
510 20.08 NGE2120FG-PT-M0510 NGE2120FG-PT2-M0510
30075a
595 23.43 NGE2120FG-PT-M0595 NGE2120FG-PT2-M0595
30075b
3 0 1 6 0 a 680 26.77 NGE2120FG-PT-M0680 NGE2120FG-PT2-M0680
30075b 765 30.12 NGE2120FG-PT-M0765 NGE2120FG-PT2-M0765
850 33.46 NGE2120FG-PT-M0850 NGE2120FG-PT2-M0850
935 36.81 NGE2120FG-PT-M0935 NGE2120FG-PT2-M0935
Other versions
for 12,7 mm (½”) belts: 1020 40.16 NGE2120FG-PT-M1020 NGE2120FG-PT2-M1020
Information about this
FT VG 1105 43.50 NGE2120FG-PT-M1105 NGE2120FG-PT2-M1105
product is only available on our
Flat top Rubber insert 1190 46.85 NGE2120FG-PT-M1190 NGE2120FG-PT2-M1190
Smart Guide® website.
1275 50.20 NGE2120FG-PT-M1275 NGE2120FG-PT2-M1275
Standard material 1360 53.54 NGE2120FG-PT-M1360 NGE2120FG-PT2-M1360
30050a 30100a NGE (GREY BLUE) 1445 56.89 NGE2120FG-PT-M1445 NGE2120FG-PT2-M1445
LBP GB 1530 60.24 NGE2120FG-PT-M1530 NGE2120FG-PT2-M1530
Sideflex
(low pressure) (Guide bar) 1615 63.58 NGE2120FG-PT-M1615 NGE2120FG-PT2-M1615
New Generation®
1700 66.93 NGE2120FG-PT-M1700 NGE2120FG-PT2-M1700
Revision 001
ucti
Maint
-0
on
-0
W=34 -0.3 mm W=51 -0.3 mm (0.42 in) ALL
30090a
8,7 mm
App
-0
als
-0
(W=1.34 in) (W=2 -0.01 in) cat
M at
-0.01 (0.34 in)
e ri
io n
li
(R 0.4 in)
R 9,5 mm
12,7 mm
(0.5 in)
13,7 mm
(0.54 in)
NG evo conveyor components
®
13,7 mm
(0.54 in)
4,35 mm
K 134 K200
(0.17 in)
ucti
Maint
10,7 mm
(0.42 in)
(0.08 in)
on
ALL
2 mm
30100a
App
als
cat
M at
e ri
io n
li
W
170 mm
(6.69 in)
85 mm 8,7 mm
(3.35 in)
(0.34 in)
R 9,5 mm
(R 0.4 in)
13,7 mm
(0.54 in)
NG evo conveyor components
®
12,7 mm
(0.5 in)
Longer wearlife than acetal
7 3 7 0 0 a
4,35 mm
Lower friction than acetal (0.17 in)
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
ucti
Maint
10,7 mm
(0.42 in)
(0.08 in)
on
ALL
2 mm
30100b
App
als
cat
M at
e ri
io n
li
W
170 mm
(6.69 in) 8,7 mm
85 mm
(3.35 in) (0.34 in)
R 9,5 mm
(R 0.4 in)
13,7 mm
(0.54 in)
NG evo conveyor components
®
12,7 mm
(0.5 in)
Lower friction than acetal
4,35 mm
Good chemical resistance (0.17 in)
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
Belt material: grey blue colour
Rubber material: thermoplastic rubber, black colour, 50 shore A. W
Backflex radius: 20 mm (0.8 in)
Max load capacity: 18000 N/m (1260 lbs/ft.) VG2 2120 170 VG3 2120
Pin material: PBT (white) 85 pitch
Insert every 2nd Insert every 3th pitch
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in):
1,524 m (5 ft.) Information about this
width > 1700 mm (66.93 in): on request product is only available
on our Smart Guide®
3 0 1 6 0 a website.
10,7 mm
(0.42 in)
(0.08 in)
2 mm
ucti
Maint
on
ALL
30100c
App
als
cat
M at
e ri
io n
li
3,9 mm
63,6 mm (0.15 in)
(2.5 in)
W
170 mm
(6.69 in) 5,4 mm 8,7 mm
85 mm
(0.21 in) (0.34 in)
(3.35 in)
R 9,5 mm
(R 0.4 in)
13,7 mm
(0.54 in)
NG evo conveyor components
®
12,7 mm
(0.5 in)
made from engineered plastic resin 4,35 mm
Longer wearlife than acetal (0.17 in)
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
Weight:
9,7 Kg/m2 (1.98 lbs/ft2.)
WIDTH W
ITEM DESCRIPTION
mm in
3 0 1 6 0 a 85 3.35 NGE2120FT-P-M0085VG50
170 6.69 NGE2120FT-P-M0170VG50
255 10.04 NGE2120FT-P-M0255VG50
Notes:
Schematic presentation of all 340 13.39 NGE2120FT-P-M0340VG50
VG rubber insert 12,7 mm (½”) 425 16.73 NGE2120FT-P-M0425VG50
pitch belts 510 20.08 NGE2120FT-P-M0510VG50
595 23.43 NGE2120FT-P-M0595VG50
30090a 30090a
680 26.77 NGE2120FT-P-M0680VG50
30100a
765 30.12 NGE2120FT-P-M0765VG50
30100c 850 33.46 NGE2120FT-P-M0850VG50
30100d
Standard material 935 36.81 NGE2120FT-P-M0935VG50
1020 40.16 NGE2120FT-P-M1020VG50
NGE (GREY BLUE)
1105 43.50 NGE2120FT-P-M1105VG50
Other versions
Information about this 1190 46.85 NGE2120FT-P-M1190VG50
for 12,7 mm (½”) belts: New Generation®
product is only available 1275 50.20 NGE2120FT-P-M1275VG50
FT FG
Flat top Flush grid on our Smart Guide®
materials details: 1360 53.54 NGE2120FT-P-M1360VG50
website.
1445 56.89 NGE2120FT-P-M1445VG50
7 3 5 6 3 a
1530 60.24 NGE2120FT-P-M1530VG50
30050a 30070a TPR (BLACK) 1615 63.58 NGE2120FT-P-M1615VG50
LBP GB 1700 66.93 NGE2120FT-P-M1700VG50
Sideflex
(low pressure) (Guide bar)
Thermoplastic rubber 1785 70.28 NGE2120FT-P-M1785VG50
Also available with side 1870 73.62 NGE2120FT-P-M1870VG50
Revision 001
ucti
Maint
on
ALL
30100d
App
als
10,7 mm
(0.42 in)
(0.08 in)
cat
2 mm
M at
e ri
io n
li
3,9 mm
42,1 mm
(0.15 in)
(1.66 in)
63,6 mm
(2.5 in) W
170 mm (6.69 in) 5,4 mm 8,7 mm
85 mm (3.35 in) (0.21 in) (0.34 in)
R 9,5 mm
(R 0.4 in)
13,7 mm
(0.54 in)
NG evo conveyor components
®
12,7 mm
(0.5 in)
4,35 mm
Lower friction than acetal (0.17 in)
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
Belt material: grey blue colour
Rubber material: thermoplastic rubber, black colour, 50 shore A. VG 2120-PT
Backflex radius: 20 mm (0.8 in)
Max load capacity: 18000 N/m (1260 lbs/ft.) Insert every pitch
Pin material: PBT (white)
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in) : 1,524 m (5 ft.)
width > 1700 mm (66.93 in): on request
Weight:
9,7 Kg/m2 (1.98 lbs/ft2.)
WIDTH W
ITEM DESCRIPTION
mm in
3 0 1 6 0 a 85 3.35 NGE2120FT-PT-M0085VG50
170 6.69 NGE2120FT-PT-M0170VG50
255 10.04 NGE2120FT-PT-M0255VG50
Notes:
340 13.39 NGE2120FT-PT-M0340VG50
Schematic presentation of all
VG rubber insert 12,7 mm (½”) 425 16.73 NGE2120FT-PT-M0425VG50
pitch belts 510 20.08 NGE2120FT-PT-M0510VG50
595 23.43 NGE2120FT-PT-M0595VG50
30090a 30090a
680 26.77 NGE2120FT-PT-M0680VG50
30100a 765 30.12 NGE2120FT-PT-M0765VG50
30100c 850 33.46 NGE2120FT-PT-M0850VG50
30100d Standard material 935 36.81 NGE2120FT-PT-M0935VG50
1020 40.16 NGE2120FT-PT-M1020VG50
NGE (GREY BLUE)
1105 43.50 NGE2120FT-PT-M1105VG50
Other versions Information about this
for 12,7 mm (½”) belts: 1190 46.85 NGE2120FT-PT-M1190VG50
product is only available New Generation®
FT FG 1275 50.20 NGE2120FT-PT-M1275VG50
on our Smart Guide®
Flat top Flush grid 1360 53.54 NGE2120FT-PT-M1360VG50
website. materials details:
1445 56.89 NGE2120FT-PT-M1445VG50
7 3 5 6 3 a
1530 60.24 NGE2120FT-PT-M1530VG50
30050a 30070a TPR (BLACK) 1615 63.58 NGE2120FT-PT-M1615VG50
LBP GB 1700 66.93 NGE2120FT-PT-M1700VG50
Sideflex
(low pressure) (Guide bar)
Thermoplastic rubber 1785 70.28 NGE2120FT-PT-M1785VG50
Also available with side
indent. Go to: 1870 73.62 NGE2120FT-PT-M1870VG50
Revision 001
10,7 mm
(0.08 in)
(0.42 in)
ucti
Maint
2 mm
on
ALL
30105a
App
als
cat
M at
e ri
io n
li
W
170 mm
(6.69 in) 8,7 mm
85 mm
(3.35 in) (0.34 in)
R 9,5 mm
(R 0.4 in)
13,7 mm
(0.54 in)
NG evo conveyor components
®
12,7 mm
4,35 mm
(0.5 in)
43,75 mm 43,75 mm
made from engineered plastic resin (1.72 in) (1.72 in) (0.17 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
3 0 1 6 0 a
Ø 10,9 mm
(Ø0.43 in)
ucti
Maint
on
ALL
30110a
App
als
cat
M at
e ri
21,5 mm
(0.85 in)
io n
li
W
170 mm
8,7 mm
(6.69 in)
85 mm (0.34 in)
(3.35 in)
R 9,5 mm
(R 0.4 in)
NG evo conveyor components
®
12,7 mm
(0.5 in)
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21 4,35 mm
norms for direct food contact (0.17 in)
Less dust than with acetal chains
More.........
New Generation®
materials details:
page code: 3 0 1 7 5 a
7 3 5 6 3 a
WIDTH W
3 0 1 6 0 a mm in
ITEM DESCRIPTION
85 3.35 NGE2120LBP-M0085
170 6.69 NGE2120LBP-M0170
Other versions ROLLER
for 12,7 mm (½”) belts: 255 10.04 NGE2120LBP-M0255
GUIDE
FT FG 340 13.39 NGE2120LBP-M0340
Flat top Flush grid 425 16.73 NGE2120LBP-M0425
510 20.08 NGE2120LBP-M0510
595 23.43 NGE2120LBP-M0595
30050a 30070a 680 26.77 NGE2120LBP-M0680
VG GB 765 30.12 NGE2120LBP-M0765
Sideflex
Rubber insert (Guide bar)
For roller guide. 850 33.46 NGE2120LBP-M0850
Go to: 935 36.81 NGE2120LBP-M0935
Revision 001
ucti
Maint
on
ALL
10,2 mm
30120a
(0.4 in)
(0.06 in)
1,5 mm
App
als
cat
M at
e ri
io n
li
W
170 mm
8,7 mm
(6.69 in)
85 mm (0.34 in)
(3.35 in)
(0.18 in)
4,5 mm
NG evo conveyor components
®
12,7 mm
made from engineered plastic resin
(0.5 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
4,35 mm
(0.17 in)
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
page code: 3 0 1 7 5 a
ucti
Maint
on
ALL
30120b
App
als
10,2 mm
(0.06 in)
cat
1,5 mm
(0.4 in)
M at
e ri
io n
li
W
170 mm 8,7 mm
85 mm (6.69 in) (0.34 in)
(3.35 in)
(0.18 in)
4,5 mm
NG evo conveyor components
®
12,7 mm
(0.5 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal 4,35 mm
Good chemical resistance (0.17 in)
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
page code: 3 0 1 7 5 a
3 0 1 6 0 a
Information about this
product is only available on Weight: Weight:
our Smart Guide® website. 10,4 Kg/m2 (2.12 lbs/ft2.) 9,9 Kg/m2 (2.02 lbs/ft2.)
Notes: Schematic presentation
of all GB guide bar 12,7 mm WIDTH W
(½”) pitch belts Standard material ITEM DESCRIPTION ITEM DESCRIPTION
mm in
NGE (GREY BLUE) 85 3.35 NGE2120FT-M0085GB-2 NGE2120FT-M0085GB-3
30120a
170 6.69 NGE2120FT-M0170GB-2 NGE2120FT-M0170GB-3
New Generation® 255 10.04 NGE2120FT-M0255GB-2 NGE2120FT-M0255GB-3
Other versions
for 12,7 mm (½”) belts: 340 13.39 NGE2120FT-M0340GB-2 NGE2120FT-M0340GB-3
materials details:
FT FG 425 16.73 NGE2120FT-M0425GB-2 NGE2120FT-M0425GB-3
Flat top Flush grid 7 3 5 6 3 a 510 20.08 NGE2120FT-M0510GB-2 NGE2120FT-M0510GB-3
595 23.43 NGE2120FT-M0595GB-2 NGE2120FT-M0595GB-3
680 26.77 NGE2120FT-M0680GB-2 NGE2120FT-M0680GB-3
30050a 30070a 765 30.12 NGE2120FT-M0765GB-2 NGE2120FT-M0765GB-3
VG LBP 850 33.46 NGE2120FT-M0850GB-2 NGE2120FT-M0850GB-3
Sideflex
Rubber insert (low pressure)
935 36.81 NGE2120FT-M0935GB-2 NGE2120FT-M0935GB-3
For every insert, go to: 1020 40.16 NGE2120FT-M1020GB-2 NGE2120FT-M1020GB-3
Revision 001
ucti
Maint
25 mm
on
ALL
30160a
App
als
FOR 2120 - 2121-2122 cat
M at
S+1
+0
e ri
io n
li
MOLDED DRIVE SPROCKETS SQUARE BORE
ONE PIECE - FLOATING
Ø OD
ØP
30X30 40X40
Z
ITEM DESCRIPTION
24 2120-24S30M-D 2120-24S40M-D
SQ 6 mm Material: reinforced polyamide (grey).
Notes:
Ø OD ØP S
Z Sprockets with ‘fixed’ bores (standard split types) do not follow the expansion or contraction of a belt
mm mm mm
and therefore can be used only for belts widths up to 680 mm (27-in) and temperature differences of
24 97,3 96,5 44,14 maximum 30°C (86°F).
28 113,3 112,5 52,15 For all other applications we recommend using floating sprockets. Sprockets that normally have a ‘fixed’
36 145,4 144,6 68,28 or ‘tight’ bore can be made ‘floating’ on request. In that case just add the letter P to the standard item
description.
For example, code 2120-24R30M-DPS
Sprockets with ‘tight’ bores (standard one piece types) can be a cost effective solution for many
Set collars, go to: applications; but if the belt is wider than 680 mm and large temperature fluctuations (> 30°C - 86°F) occur,
5 4 6 3 0 a we recommend using the floating versions. ‘Tight’ and ‘floating’ bore sprockets are recommended to be
kept in position with set collars or with help of the positioners of the belt.
New design
3 0 9 9 5 a
Features:
• New design with snap-assembly system included.
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Excellent wear and chemical resistance.
• Recyclable. NOT SUITABLE FOR 2122 FG !
ucti
Maint
• Split versions: quick and easy replacement.
on
• Foolproof design.
ALL
30160b
App
als
• Completely closed structure, easy to clean cat
M at
e ri
io n
li
and to disinfect.
• Excellent wear and chemical resistance. New design
• Recyclable. 3 0 9 9 0 a
S+ 1
+0
23 mm Ø 25 Ø 30 Ø 35 Ø 40
Z
12 mm ITEM DESCRIPTION
14 2120-14R25M-DM 2120-14R30M-DM - -
16 2120-16R25M-DM 2120-16R30M-DM - -
DF 20 2120-20R25M-DM 2120-20R30M-DM 2120-20R35M-DM 2120-20R40M-DM
24 2120-24R25M-DM 2120-24R30M-DM 2120-24R35M-DM 2120-24R40M-DM
MACHINED DRIVE SPROCKETS - SPLIT
FIXED
S+ 1
+0
DF Notes:
Ø OD ØP S Sprockets with ‘fixed’ bores (standard split types) do not follow the expansion or contraction of
Z a belt and therefore can be used only for belts widths up to 680 mm (27-in) and temperature
mm mm mm
differences of maximum 30°C (86°F).
14 56,4 56,6 24,17
For all other applications we recommend using floating sprockets. Sprockets that normally have
16 64,5 64,6 28,15
a ‘fixed’ or ‘tight’ bore can be made ‘floating’ on request. In that case just add the letter P to the
20 80,4 80,5 36,14 standard item description. For example, code 2120-14R25M-DPS
24 97,3 96,5 44,14
28 113,3 112,5 52,15 Sprockets with ‘tight’ bores (standard one piece types) can be a cost effective solution for many
36 145,4 144,6 68,28 applications, but if the belt is wider than 680 mm (27-in) and large temperature fluctuations (> 30°C
38 153,9 152,6 72,28 - 86°F) occur, we recommend using the floating versions. ‘Tight’ and ‘floating’ bore sprockets are
40 161,9 160,6 76,30 recommended to be kept in position with set collars or with help of the positioners of the belt.
23 mm
5 4 6 3 0 a
Ø OD
ØP
Ø 18* (R18M) Ø 25 Ø 30 Ø 35 Ø 40
Ø 23* (R23M)
S+ 1
+0
Z
ITEM DESCRIPTION
14 2120-14R18M-RM 2120-14R25M-RM 2120-14R30M-RM - -
Ø OD
ØP
3 0 1 6 0 c DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR BELTS 2120 - 2120M - 2121
e Co
nanc nstr
ucti
New design
Maint
on
Set collars, go to: ALL
30160c
3 0 9 9 5 a
App
als
5 4 6 3 0 a cat
M at
e ri
io n
li
Features:
• New design with snap-assembly system included.
• Very high strength.
See also the sprockets
• Split versions: quick and easy replacement. See 12,7 mm (½”) and idler wheels:
• Foolproof design. pitch belts:
• Excellent wear and chemical resistance. 3 0 1 6 0 a
• Recyclable. 3 0 0 2 0 a
3 0 1 6 0 b
ITEM DESCRIPTION
28 2120-28R30M-DPS-K2 2120-28R35M-DPS-K2 2120-28R40M-DPS-K2
36 2120-36R30M-DPS-K2 - 2120-36R40M-DPS-K2
MOLDED DRIVE SPROCKETS SQUARE BORE - SPLIT
DF FLOATING
Z 40X40
S+ 1
+0
24 - - -
47,5 mm 28 - - 2120-28S40M-DS
36 - - 2120-36S40M-DS
Ø OD
Material: reinforced polyamide (black), screws in stainless steel, nuts in nickel plated brass.
SQ
New design
3 0 9 9 0 a Z
Ø OD ØP S
mm mm mm
Features:
16 64,5 64,6 28,15
• Very high strength.
20 80,4 80,5 36,14
• Split versions: quick and easy replacement.
24 97,3 96,5 44,14
• Foolproof design.
• Completely closed structure, easy to clean 28 113,3 112,5 52,15
and to disinfect. 36 145,4 144,6 68,28
• Excellent wear and chemical resistance. 38 153,9 152,6 72,28
• Recyclable.
S+ 1
+0
23 mm
12 mm 30X30 35X35 40X40 60X60
Z
ITEM DESCRIPTION
16 2120-16S30M-DM - - -
SQ 20 -
2120-20S30M-DM 2120-20S35M-DM -
24 2120-24S30M-DM - 2120-24S40M-DM -
MACHINED DRIVE SPROCKETS SQUARE BORE - SPLIT
S+ 1
+0
FLOATING
28 2120-28S30M-DMS - 2120-28S40M-DMS -
Ø OD
ØP
SQ
S+ 1
+0
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
Drive sprockets capable of floating freely on the shaft, just add the letter “P” (=plus) to the existing Item description. For example, code
on
ALL
30165a
2124-16R25M-DPMS
App
als
cat
M at
e ri
io n
li
New design
3 0 9 9 0 a
Features:
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
TIGHT
A = 25
Ø OD
9,5 mm
ØP
Ø 25 Ø 30 Ø 35 Ø 40
Z
ITEM DESCRIPTION
16 2124-16R25M-DM 2124-16R30M-DM - -
24 2124-24R25M-DM 2124-24R30M-DM 2124-24R35M-DM 2124-24R40M-DM
DF
ØM
A = 34
28 2124-28R25M-DMS 2124-28R30M-DMS 2124-28R35M-DMS 2124-28R40M-DMS
A
36 2124-36R25M-DMS 2124-36R30M-DMS 2124-36R35M-DMS 2124-36R40M-DMS
Ø OD
ØP
DF
9,5 mm
Ø OD ØP ØM S
Z Set collars, go to:
mm mm mm mm
5 4 6 3 0 a
S+ 1
+0
ØM
A = 25
S+ 1
+0
Ø 18* (R18M)
Ø 25 Ø 30 Ø 35 Ø 40
Z Ø 23* (R23M)
Ø OD
ØP
ITEM DESCRIPTION
16 2124-16R18M-RM 2124-16R25M-RM 2124-16R30M-RM - -
24 2124-24R18M-RM 2124-24R25M-RM 2124-24R30M-RM 2124-24R35M-RM 2124-24R40M-RM
DF
MACHINED RETURN SPROCKETS - SPLIT
A = 34
282124-28R23M-RMS 2124-28R25M-RMS 2124-28R30M-RMS 2124-28R35M-RMS 2124-28R40M-RMS
362124-36R23M-RMS 2124-36R25M-RMS 2124-36R30M-RMS 2124-36R35M-RMS 2124-36R40M-RMS
Revision 001
Material: polyamide (natural white), screws in stainless steel, bushings in brass. *Plain bore
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
Also available:
on
ALL
30166a
molded monoblock
App
als
sprockets 24 teeth cat
M at
e ri
io n
li
with square bore.
26 mm
Go to:
14 mm
3 0 1 6 0 a
S+ 1
+0
TIGHT
ØP
26 mm
14 mm Ø 25 Ø 30 Ø 40
Z
ITEM DESCRIPTION
S+ 1
+0
14 2122-14R25M-DM 2122-14R30M-DM -
DF
20 2122-20R25M-DM 2122-20R30M-DM -
Ø OD
ØP
24 2122-24R25M-DM 2122-24R30M-DM -
MACHINED DRIVE SPROCKETS - SPLIT
FIXED
S+ 1
+0
Notes:
S+ 1
+0
Sprockets with ‘fixed’ bores (standard split types) do not follow the expansion or contraction of a belt and therefore can
DF be used only for belts widths up to 680 mm (27-in) and temperature differences of maximum 30°C (86°F).
For all other applications we recommend using floating sprockets. Sprockets that normally have a ‘fixed’ or ‘tight’ bore
Ø OD
ØP
can be made ‘floating’ on request. In that case just add the letter P to the standard item description.
For example, code 2122-14R25M-DPS
Ø OD ØP S
Z
mm mm mm Sprockets with ‘tight’ bores (standard one piece types) can be a cost effective solution for many applications, but if the
DF belt is wider than 680 mm (27-in) and large temperature fluctuations (> 30°C - 86°F) occur, we recommend using the
14 56,9 57,1 24,3 floating versions. ‘Tight’ and ‘floating’ bore sprockets are recommended to be kept in position with set collars or with
20 81,2 81,2 36,3 help of the positioners of the belt.
24 99,3 97,3 44,3
28 115,4 113,4 52,4
38 155,8 153,8 72,6 New design
3 0 9 9 0 a
Set collars, go to:
Features:
• Very high strength. 5 4 6 3 0 a
• Split versions: quick and easy replacement.
• Foolproof design.
26 mm • Completely closed structure, easy to clean Information about this
14 mm and to disinfect. product is only available See belts 2122:
• Excellent wear and chemical resistance. on our Smart Guide®
• Recyclable. website. 3 0 0 7 3 a
S+1
+0
Ø OD
ØP
26 mm
MACHINED RETURN SPROCKETS - ONE PIECE
14 mm
Ø 18* (R18M) Ø 25 Ø 30 Ø 40
S+1
+0
Z Ø 23* (R23M)
DF ITEM DESCRIPTION
Ø OD
Material: polyamide (natural white), screws in stainless steel, bushings in brass. *Plain bore
S+ 1
+0
DF
Ø OD
ØP
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
W W=255 mm
nanc nstr
ucti
Maint
(W=10.04 in)
on
85 mm 85 mm
ALL
30175a
App
als
(3.35 in) (3.35 in)
cat
M at
e ri
io n
li
5 mm 5 mm
W=255 mm (0.2 in)W=255 mm (0.2 in)
(W=10.04 in) (W=10.04 in)
85 mm 85 mm
85 mm 85 mm 8,5 mm RIBS ONLY
(3.35 in) (3.35
(3.35
in) in) (3.35 in) (0.33 in) FOR 2120M
5 mm 5 mm5 mm 5 mm
(0.2 in) (0.2(0.2
in) in) (0.2 in)
W=170 mm
(W=6.69 in)
85 mm
(3.35 in)
5 mm
W=170 mm (0.2 in)W=170 mm
(W=6.69 in) (W=6.69 in)
85 mm 85 mm 8,5 mm
(0.33 in)
(3.35 in) (3.35 in)
5 mm 5 mm
(0.2 in) (0.2 in)
c li c k f
8,5 mm 8,5 mm
(0.33 in) (0.33 in) Sagline angle
or
vid e o
W=85 mm
MIN.
15
(3.35 in)
.
MAX
28
For profiles W=85 mm W=85 mm
8,5 mm
go to: (0.33 in)
(3.35 in) (3.35 in)
5 0 5 5 0 b
8,5 mm 8,5 mm
(0.33 in) (0.33 in)
PATENTED
RIBS ONLY
(R 0.37 in)
R 9,5 mm
FOR 2120M
(0.098 in)
2,5 mm
(0.75 in)
(0.2 in)
(0.2 in)
19 mm
19 mm
5 mm
5 mm
(R 0.37 in)
R 9,5 mm
R 9,5 mm
(R 0.37 in)
(0.098 in)
R 9,5 mm
2,5 mm
2,5 mm
(0.75 in)
(0.75 in)
(0.75 in)
(0.75 in)
(0.2 in)
in)
(0.2 in)
in)
19 mm
19 mm
19 mm
19 mm
mm
mm
(0.2in)
(0.2in)
5 mm
5 mm
5 mm
5 mm
(0.53
13,5
13,5
29,5 mm
(1.16 in)
13,5 mm
13,5 mm
13,5 mm
(0.53 in)
(0.53 in)
(0.53 in)
(0.53 in)
29,5 mm
(1.16 in)
(1.16 in)
(0.74 in) (0.75 in)(0.74 in) (0.75 in) (0.74 in) (0.75 (0.74
in) in) (0
87 mm 87 mm 66,5 mm 66,5 mm
(3.4 in) (3.4 in) (2.62 in) (2.62 in)
W W Note:
See side flexing belts ITEM DESCRIPTION 1,2 m nose bar are supplied WITHOUT holes
mm in
2120M:
SNB2120M-NS-85H 85 3.35
Revision 001
3 0 2 1 0 a 3 0 2 0 0 a
3 0 2 1 5 a
3 0 2 3 0 a 3 0 2 2 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
(0.34 in)
on
W ALL
30200a
App
als
cat
M at
e ri
io n
li
NG®evo conveyor components
made from engineered plastic resin
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
Standard material
It meets the requirement for materials as NGE (GREY BLUE)
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
19,05 mm
Less dust than with acetal chains New Generation®
(0.75 in)
More.........
materials details:
4,35 mm
7 3 5 6 3 a
(0.17 in)
5,45 mm
(0.28 in)
7 mm
(0.21 in)
43,7 mm
(1.72 in) 8,7 mm
W (0.34 in)
PATENTED
19,05 mm
(0.75 in)
4,35 mm
Pin material: PBT (water blue) (0.17 in)
WIDTH W PITCH P BACKFLEX RADIUS MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in mm in N lbs Kg/m lbs/ft.
NGE2190FT-PT-K300 76,2 3 2070 460 0,6 0.4
NGE2190FT-PT-K325 82,6 3.25 2250 500 0,6 0.4
NGE
NGE2190FT-PT-K450 114,3 4.5 19,05 0.75 20 0.79 3060 680 0,8 0.54
Grey Blue
NGE2190FT-PT-K600 152,4 6 4150 910 1,1 0.74
NGE2190FT-PT-K750 190,5 7.5 5150 1140 1,4 0.94
ucti
Maint
on
W
ALL
30210a
App
als
cat
M at
(6.00 in)
e ri
io n
li
152,4 mm
76,2 mm 8,7 mm
(3.00 in) (0.34 in)
19,05 mm
NG evo conveyor components
®
(0.75 in)
made from engineered plastic resin
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance 4,35 mm
High abrasion resistance (0.17 in)
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
WIDTH W
ITEM DESCRIPTION
mm in
76 3.00
152 6.00
Go to: 3 0 2 0 0 a
229 9.00 NGE2190FT-K900
305 12.00 NGE2190FT-K1200
381 15.00 NGE2190FT-K1500
457 18.00 NGE2190FT-K1800
PATENTED 533 21.00 NGE2190FT-K2100
610 24.00 NGE2190FT-K2400
686 27.00 NGE2190FT-K2700
762 30.00 NGE2190FT-K3000
838 33.00 NGE2190FT-K3300
914 36.00 NGE2190FT-K3600
991 39.00 NGE2190FT-K3900
Standard material
1067 42.00 NGE2190FT-K4200
NGE (GREY BLUE) 1143 45.00 NGE2190FT-K4500
1219 48.00 NGE2190FT-K4800
New Generation® 1295 51.00 NGE2190FT-K5100
1372 54.00 NGE2190FT-K5400
materials details: 1448 57.00 NGE2190FT-K5700
7 3 5 6 3 a 1524 60.00 NGE2190FT-K6000
1600 63.00 NGE2190FT-K6300
1676 66.00 NGE2190FT-K6600
1753 69.00 NGE2190FT-K6900
Other version Notes: 1829 72.00 NGE2190FT-K7200
for 19,05 mm (¾”) belts: Schematic presentation of all Information about this 1905 75.00 NGE2190FT-K7500
flat top 19,05 mm (¾”) pitch belts product is only available on our 1981 78.00 NGE2190FT-K7800
2190 FG
Smart Guide® website. 2057 81.00 NGE2190FT-K8100
2134 84.00 NGE2190FT-K8400
Revision 001
e Co
nanc nstr
ucti
Maint
on
ALL
VERSION 4.8 INCHES
30215a
App
als
(TOTAL WIDTH 6 INCHES) cat
M at
e ri
io n
li
78 mm
(3.07 in)
19,05 mm
High abrasion resistance
(0.75 in)
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
R 12,5 mm
(R 0.5 in)
More.........
4,35 mm
Backflex radius: 20 mm (0.79 in)
(0.17 in)
Max load capacity:
K480T: 3300N (730lbs)
K510T: 3500N (780lbs) VERSION 5.1 INCHES
Weight: 1,2 Kg/m (0,85 lbs/ft)
Pin material: PBT (water blue)
(TOTAL WIDTH 6.3 INCHES)
Standard length: 3,048 m (10ft) 81 mm
(3.2 in)
materials details:
7 3 5 6 3 a
19,05 mm
(0.75 in)
R 12,5 mm
(R 0.5 in)
4,35 mm
(0.17 in)
WIDTH W WIDTH WT
PATENTED mm in mm in
ITEM DESCRIPTION
e
(0.34 in)
ucti
Maint
W
on
NG evo conveyor components
® ALL
30220a
App
als
made from engineered plastic resin
cat
M at
e ri
Longer wearlife than acetal
7 3 7 0 0 a io n
li
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21 Standard material
norms for direct food contact
Less dust than with acetal chains NGE (GREY BLUE)
More.........
19,05 mm
(0.75 in)
New Generation®
materials details:
4,35 mm 7 3 5 6 3 a
Pin material: PBT (water blue) Open surface: 19% (0.17 in)
5,45 mm
(0.28 in)
7 mm
(0.21 in)
43,7 mm
(1.72 in) 8,7 mm
W (0.34 in)
PATENTED
19,05 mm
(0.75 in)
4,35 mm
(0.17 in)
Pin material: PBT (water blue) Open surface: 19%
WIDTH W PITCH P BACKFLEX RADIUS MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in mm in N lbs Kg/m lbs/ft.
NGE2190FG-PT-K300 76,2 3 2070 460 0,5 0.34
NGE2190FG-PT-K325 82,6 3.25 2250 500 0,5 0.34
NGE
NGE2190FG-PT-K450 114,3 4.5 19,05 0.75 20 0.79 3060 680 0,7 0.47
Grey Blue
NGE2190FG-PT-K600 152,4 6 4150 910 1 0.67
NGE2190FG-PT-K750 190,5 7.5 5150 1140 1,2 0.81
Standard length: 160 pitches (3,048 m - 10 ft.)
30220a 30220a
product is only available on our
30210a 30230a
3 0 2 3 5 a Smart Guide® website.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30230a
App
als
cat
M at
e ri
io n
li
W
152,4 mm
(6 in) 8,7 mm
76,2 mm (0.34 in)
(3 in)
19,05 mm
(0.75 in)
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as 4,35 mm
stated by EC1935/2004 and FDA CFR21 (0.17 in)
norms for direct food contact
Less dust than with acetal chains
More.........
30220a 30220a
2210 87.00 NGE2190FG-K8700
3 0 2 3 5 a
30210a 30230a 2286 90.00 NGE2190FG-K9000
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
Sprockets with ‘fixed’ bores (standard split types) do not follow the expansion or contraction of a belt and therefore can be used only for belts
on
widths up to 680 mm (27-in) and temperature differences of maximum 30°C (86°F). ALL
30235a
App
als
For all other applications we recommend using floating sprockets. Sprockets that normally have a ‘fixed’ or ‘tight’ bore can be made ‘floating’ on cat
M at
e ri
io n
li
request. In that case just add the letter P to the standard item description.
For example, code 2190-17R25M-DPMS
Sprockets with ‘tight’ bores (standard one piece types) can be a cost effective solution for many applications, but if the belt is wider than 680 mm
(27-in) and large temperature fluctuations (> 30°C - 86°F) occur, we recommend using the floating versions. ‘Tight’ and ‘floating’ bore sprockets are
recommended to be kept in position with set collars or with help of the positioners of the belt.
New design
3 0 9 9 0 a
Features:
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
7 mm
S+ 1
+0
Ø OD
Ø OD ØP S
ØP
Z
mm mm mm
17 103,4 100,7 46
21 128,7 127,8 58,65
24 145,6 142,9 67,1
18 mm 25 151,7 149 70,15
(0.34 in)
8,7 mm
3 0 3 2 5 a 3 0 3 1 0 a
FLAT TOP - 2253 FT FLAT TOP - VACUUM - 2253 FT ROLLER TOP - 2253RTC
3 0 3 3 0 a 3 0 3 9 8 n 3 0 3 9 8 a
FLAT TOP VERSION WITH TRANSFER WING - 2250 FT
3 0 3 2 0 a
25,4 mm
FLUSH GRID VERSION - 2250 FG
(1 in)
3 0 3 4 0 a
3 0 3 6 0 a
FLUSH GRID VERSION WITH TRANSFER WING - 2250 FG
3 0 3 5 0 a
3 0 3 7 0 a 3 0 3 8 0 a
AVAILABLE ALSO CHAINBELT SIDEFLEXING
page code: 3 0 3 6 5 a
3 0 7 1 0 a 3 0 7 1 0 a 3 0 7 0 0 a
2250 TAB FT 2251 TAB FT 2251 M FT
3 0 7 0 0 a 3 0 7 0 0 a
2260 M FT 2260 M FG
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
NG evo conveyor components
®
W=83,8 mm 8,7 mm
ALL
30310a
App
als
made from engineered plastic resin (3.3 in) (0.34 in)
cat
M at
e ri
Longer wearlife than acetal
7 3 7 0 0 a io n
li
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
25,4 mm
(1 in)
4,35 mm 3 0 3 9 5 a
(0.17 in)
Pin material: PBT (white)
WIDTH W PITCH P BACKFLEX RADIUS MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in mm in N lbs Kg/m lbs/ft.
NGE2250FT-K330 NGE Grey Blue 83,8 3.3 25,4 1 25 0.98 1890 425 0,6 0.4
LFG2250FT-K330 LFG Grey 83,8 3.3 25,4 1 25 0.98 2100 470 0,6 0.4
Standard length: 120 pitches (3,048 m - 10 ft.)
5 mm
42,1 mm (0.2 in)
10 mm 8,7 mm
(1.66 in) (0.39 in) (0.34 in)
25,4 mm
(1 in)
W=83,8 mm 4,35 mm
(3.3 in) (0.17 in) 3 0 3 9 5 a
Pin material: PBT (white)
WIDTH W PITCH P BACKFLEX RADIUS MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in mm in N lbs Kg/m lbs/ft.
NGE2250FT-PT-K330 NGE Grey Blue 83,8 3.3 25,4 1 25 0.98 1890 425 0,6 0.4
LFG2250FT-PT-K330 LFG Grey 83,8 3.3 25,4 1 25 0.98 2100 470 0,6 0.4
Standard length: 120 pitches (3,048 m - 10 ft.)
Standard materials
Notes: Schematic presentation of Other versions for 25,4 mm (1”) belts:
all flat top 25,4 mm (1”) pitch belts. NGE (GREY BLUE)
Thickness: 8,7 mm (0.34 in) FG VG FT
Flush grid Rubber insert Vacuum New Generation®
30310a 30310a 30320a
30325a
30335a
LFG (GREY)
30360a 30370a 30398n
30335b
30320a
30398a
7 3 5 6 3 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
3 0 3 2 0 a 25,4 mm (1”) 2250 WITH TRANSFER WING - THICKNESS: 8,7 mm (0.34 in)
www.SystemPlastSmartGuide.com
SINGLE TRACK
e Co
nanc nstr
ucti
Maint
63 mm
on
(2.48 in) ALL
30320a
App
als
cat
M at
R=80 mm (3.15 in)
e ri
io n
li
5 mm
42,1 mm (0.2 in)
(1.66 in)
W=83,8 mm
(3.3 in) 10 mm 8,7 mm
(0.39 in) (0.34 in)
25,4 mm
New Generation®
(1 in)
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains materials details:
4,35 mm
More......... 109 mm
(4.29 in) (0.17 in) 7 3 5 6 3 a
Pin material: PBT (white)
WIDTH W PITCH P BACKFLEX RADIUS MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in mm in N lbs Kg/m lbs/ft.
NGE2250FT-PT-K330T NGE Grey Blue 83,8 3.3 25,4 1 30 1.18 1890 425 0,7 0.47
WIDER VERSIONS
5 mm
(0.2 in)
42,1 mm 21,5 mm
W (1.66 in) (0.85 in)
Wt = W + 24,6 mm 8,7 mm
10 mm
(Wt = W + 0.97 in)
(0.39 in)
25,4 mm (0.34 in)
30335b
510 20.08 NGE2250FT-PT-M0510T
30320a
30398a
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
LFB
ucti
Maint
on
W ALL
30325a
LFG
App
als
170 mm cat
M at
e ri
io n
li
(6.69 in)
85 mm 8,7 mm
(3.35 in) (0.34 in)
25,4 mm
(1 in)
NG evo conveyor components
®
4,35 mm
made from engineered plastic resin (0.17 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance 2253FT Belts with flights
High abrasion resistance
Bevelled edges:
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
30335b
2210 87.01 NGE2250FT-M2210 LFG2250FT-M2210 LFB2250FT-M2210
30320a
2295 90.35 NGE2250FT-M2295 LFG2250FT-M2295 LFB2250FT-M2295
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30330a
LFG
App
als
cat
M at
e ri
io n
li
LFB W
152,4 mm
(6 in) 8,7 mm
76,2 mm
(3 in) (0.34 in)
R=25 mm
(R =0.98 in)
Bevelled edges:
25,4 mm
(1 in)
4,35 mm
W (0.17 in)
25,4 mm
Standard materials
(1 in)
610 24.00 LFB2253FT-K2400 LFG2253FT-K2400
Other versions for 25,4 mm (1”) belts:
LFB (BLUE) 686 27.00 LFB2253FT-K2700 LFG2253FT-K2700
FG VG FT 762 30.00 LFB2253FT-K3000 LFG2253FT-K3000
Flush grid Rubber insert Vacuum
Low friction acetal resin 838 33.00 LFB2253FT-K3300 LFG2253FT-K3300
914 36.00 LFB2253FT-K3600 LFG2253FT-K3600
991 39.00 LFB2253FT-K3900 LFG2253FT-K3900
LFG (GREY)
30360a 30370a 30398n 1067 42.00 LFB2253FT-K4200 LFG2253FT-K4200
RTC 1143 45.00 LFB2253FT-K4500 LFG2253FT-K4500
Roller top Low friction acetal resin
1219 48.00 LFB2253FT-K4800 LFG2253FT-K4800
1295 51.00 LFB2253FT-K5100 LFG2253FT-K5100
materials details: 4,35
1372 54.00 LFB2253FT-K5400 LFG2253FT-K5400
30398a 7 3 5 6 3 a 1448 57.00 LFB2253FT-K5700 LFG2253FT-K5700 (0.17
1524 60.00 LFB2253FT-K6000 LFG2253FT-K6000
Notes: Schematic presentation of Other versions 1600 63.00 LFB2253FT-K6300 LFG2253FT-K6300
all flat top 25,4 mm (1”) pitch belts. for 25,4 mm (1”) belts: 1676 66.00 LFB2253FT-K6600 LFG2253FT-K6600
Thickness: 8,7 mm (0.34 in) 1753 69.00 LFB2253FT-K6900 LFG2253FT-K6900
30310a 30310a 30320a
1829 72.00 LFB2253FT-K7200 LFG2253FT-K7200
1905 75.00 LFB2253FT-K7500 LFG2253FT-K7500
30325a
1981 78.00 LFB2253FT-K7800 LFG2253FT-K7800
30335a
2057 81.00 LFB2253FT-K8100 LFG2253FT-K8100
30335a 2134 84.00 LFB2253FT-K8400 LFG2253FT-K8400
30335b
Also available 2210 87.00 LFB2253FT-K8700 LFG2253FT-K8700
in metric version. Go to: 2286 90.00 LFB2253FT-K9000 LFG2253FT-K9000
Revision 001
30335b
3 0 3 2 5 a 2362 93.00 LFB2253FT-K9300 LFG2253FT-K9300
30320a
2438 96.00 LFB2253FT-K9600 LFG2253FT-K9600
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30335a
App
als
2250FT-P cat
M at
e ri
io n
li
5 mm
(0.2 in)
63,6 mm
(2.5 in)
10 mm 8,7 mm
(0.39 in) (0.34 in)
2250FT-P2
NG evo conveyor components
®
25,4 mm
Lower friction than acetal (0.2 in) (0.2 in)
(1 in)
63,6 mm 63,6 mm
Good chemical resistance
(2.5 in) (2.5 in)
High abrasion resistance
It meets the requirement for materials as W 4,35 mm
stated by EC1935/2004 and FDA CFR21 170 mm (0.17 in)
norms for direct food contact (6.69 in)
Less dust than with acetal chains 85 mm
More......... (3.35 in)
3 0 3 9 5 a
WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION
mm in
Other versions for 25,4 mm (1”) belts:
FG VG FT
85 3.35 NGE2250FT-P-M0085 Go to: 3 0 3 3 5 b
Flush grid Rubber insert Vacuum
170 6.69 NGE2250FT-P-M0170 NGE2250FT-P2-M0170
255 10.04 NGE2250FT-P-M0255 NGE2250FT-P2-M0255
340 13.39 NGE2250FT-P-M0340 NGE2250FT-P2-M0340
30360a 30370a 30398n 425 16.73 NGE2250FT-P-M0425 NGE2250FT-P2-M0425
RTC
Roller top 510 20.08 NGE2250FT-P-M0510 NGE2250FT-P2-M0510
595 23.43 NGE2250FT-P-M0595 NGE2250FT-P2-M0595
680 26.77 NGE2250FT-P-M0680 NGE2250FT-P2-M0680
765 30.12 NGE2250FT-P-M0765 NGE2250FT-P2-M0765
30398a
850 33.46 NGE2250FT-P-M0850 NGE2250FT-P2-M0850
935 36.81 NGE2250FT-P-M0935 NGE2250FT-P2-M0935
Notes: Schematic presentation of 1020 40.16 NGE2250FT-P-M1020 NGE2250FT-P2-M1020
all flat top 25,4 mm (1”) pitch belts. Information about this
Thickness: 8,7 mm (0.34 in) product is only available on our 1105 43.50 NGE2250FT-P-M1105 NGE2250FT-P2-M1105
Smart Guide® website. 1190 46.85 NGE2250FT-P-M1190 NGE2250FT-P2-M1190
30310a 30310a 30320a
1275 50.20 NGE2250FT-P-M1275 NGE2250FT-P2-M1275
30325a Standard material 1360 53.54 NGE2250FT-P-M1360 NGE2250FT-P2-M1360
30335a
NGE (GREY BLUE) 1445 56.89 NGE2250FT-P-M1445 NGE2250FT-P2-M1445
30335a
1530 60.24 NGE2250FT-P-M1530 NGE2250FT-P2-M1530
New Generation® 1615 63.58 NGE2250FT-P-M1615 NGE2250FT-P2-M1615
30335b
1700 66.93 NGE2250FT-P-M1700 NGE2250FT-P2-M1700
Revision 001
30335b
materials details: 1785 70.28 NGE2250FT-P-M1785 NGE2250FT-P2-M1785
30320a
7 3 5 6 3 a 1870 73.62 NGE2250FT-P-M1870 NGE2250FT-P2-M1870
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
LFG ALL
30335b
App
als
cat
M at
e ri
io n
li
2250FT-PT
5 mm
(0.2 in)
21,5 mm 42,1 mm
(0.85 in) (1.66 in)
63,6 mm
10 mm 8,7 mm
(2.5 in)
(0.39 in) (0.34 in) Other versions for 25,4 mm
2250FT-PT2 (1”) belts:
FG VG
Flush grid Rubber insert
25,4 mm
63,6 mm 63,6 mm 30360a 30370a
(1 in)
Good chemical resistance (2.5 in) W (2.5 in) RTC FT
High abrasion resistance Roller top Vacuum
170 mm
It meets the requirement for materials as 4,35 mm
(6.69 in)
stated by EC1935/2004 and FDA CFR21 85 mm (0.17 in)
norms for direct food contact (3.35 in)
Less dust than with acetal chains
30398a 30398n
More.........
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in): 1,524 m (5 ft.) 30335b
width > 1700 mm (66.93 in): on request
30320a
ucti
Maint
on
ALL
30340a
App
als
cat
M at
e ri
io n
li
2250FG- K330 2250FG-PT-K330
5 mm
42,1 mm (0.2 in)
W=83,8 mm 8,7 mm (1.66 in) 10 mm 8,7 mm
(W=3.3 in) (0.34 in) (0.39 in) (0.34 in)
25,4 mm
25,4 mm
(1 in)
(1 in)
3 0 3 9 5 a
30398a
30360c
New Generation®
Revision 001
30360c
materials details:
30350a
7 3 5 6 3 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30350a
R = 80 mm (3.15)
App
als
cat
M at
e ri
5 mm io n
li
42,1 mm (0.2 in)
(1.66 in)
W=83,8 mm
(3.3 in) 10 mm 8,7 mm
(0.39 in) (0.34 in)
25,4 mm
stated by EC1935/2004 and FDA CFR21
(1 in)
norms for direct food contact New Generation®
Less dust than with acetal chains
More.........
109 mm 4,35 mm materials details:
WIDER VERSIONS
R = 80 mm (3.15 in)
5 mm
(0.5 in)
42,1 mm 21,5 mm
Wt = W + 24,6 mm
10 mm 8,7 mm
(Wt = W + 0.97 in)
(0.39 in) (0.34 in)
3 0 3 9 5 a EXAMPLE INSTALLATION
30360c
425 16.73 NGE2250FG-PT-M0425T
30350a
30398a 510 20.08 NGE2250FG-PT-M0510T
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
LFB
ucti
Maint
on
ALL
30360a
LFG
App
als
cat
M at
e ri
io n
li
W
170 mm
(6.69 in)
85 mm 8,7 mm
(3.35 in) (0.34 in)
25,4 mm
NG evo conveyor components
®
(1 in)
made from engineered plastic resin
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal 4,35 mm
Good chemical resistance
High abrasion resistance Belts with flights (0.17 in)
30360c
2210 87.01 NGE2250FG-M2210 LFG2250FG-M2210 LFB2250FG-M2210
30350a
2295 90.35 NGE2250FG-M2295 LFG2250FG-M2295 LFB2250FG-M2295
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30360b
App
als
2250FG-P cat
M at
e ri
io n
li
5 mm
(0.2 in)
63,6 mm
(2.5 in)
10 mm 8,7 mm
(0.39 in) (0.34
2250FG-P2
NG evo conveyor components
®
25,4 mm
(0.2 in) (0.2 in)
(1 in)
Lower friction than acetal 63,6 mm 63,6 mm
Good chemical resistance (2.5 in) (2.5 in)
High abrasion resistance W 4,35 mm
It meets the requirement for materials as (0.17 in)
170 mm
stated by EC1935/2004 and FDA CFR21
(6.69 in)
norms for direct food contact 85 mm
Less dust than with acetal chains (3.35 in)
More.........
3 0 3 9 5 a
WIDTH W
Other versions for 25,4 mm (1”) belts: ITEM DESCRIPTION ITEM DESCRIPTION
mm in
FT FT VG 85 3.35 NGE2250FG-P-M0085 -
Flat top Vacuum Rubber insert NGE2250FG-P2-M0170
170 6.69 NGE2250FG-P-M0170
255 10.04 NGE2250FG-P-M0255 NGE2250FG-P2-M0255
340 13.39 NGE2250FG-P-M0340 NGE2250FG-P2-M0340
30325a 30398n 30370a 425 16.73 NGE2250FG-P-M0425 NGE2250FG-P2-M0425
RTC 510 20.08 NGE2250FG-P-M0510 NGE2250FG-P2-M0510
Roller top
595 23.43 NGE2250FG-P-M0595 NGE2250FG-P2-M0595
680 26.77 NGE2250FG-P-M0680 NGE2250FG-P2-M0680
765 30.12 NGE2250FG-P-M0765 NGE2250FG-P2-M0765
30398a
850 33.46 NGE2250FG-P-M0850 NGE2250FG-P2-M0850
935 36.81 NGE2250FG-P-M0935 NGE2250FG-P2-M0935
Notes: Schematic presentation of NGE2250FG-P2-M1020
1020 40.16 NGE2250FG-P-M1020
all flush grid 25,4 mm (1”) pitch
belts. Thickness: 8,7 mm (0.34 in) Information about this 1105 43.50 NGE2250FG-P-M1105 NGE2250FG-P2-M1105
product is only available on our NGE2250FG-P2-M1190
1190 46.85 NGE2250FG-P-M1190
Smart Guide® website.
30340a 30340a 30350a
1275 50.20 NGE2250FG-P-M1275 NGE2250FG-P2-M1275
30360a Standard material 1360 53.54 NGE2250FG-P-M1360 NGE2250FG-P2-M1360
30360b
NGE (GREY BLUE) 1445 56.89 NGE2250FG-P-M1445 NGE2250FG-P2-M1445
30360b
1530 60.24 NGE2250FG-P-M1530 NGE2250FG-P2-M1530
New Generation® 1615 63.58 NGE2250FG-P-M1615 NGE2250FG-P2-M1615
30360c
1700 66.93 NGE2250FG-P-M1700 NGE2250FG-P2-M1700
Revision 001
30360c
materials details: 1785 70.28 NGE2250FG-P-M1785 NGE2250FG-P2-M1785
30350a
7 3 5 6 3 a 1870 73.62 NGE2250FG-P-M1870 NGE2250FG-P2-M1870
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30360c
App
als
2250FG-PT cat
LFG M at
e ri
io n
li
5 mm
21,5 mm (0.20 in)
42,1 mm
(0.85 in) (1.66 in)
63,6 mm
10 mm 8,7 mm
(2.5 in)
(0.39 in) (0.34 in)
2250FG-PT2
Other versions for 25,4 mm
(1”) belts:
5 mm 5 mm
21,5 mm 42,1 mm
(0.2 in) (0.2 in)
42,1 mm 21,5 mm
FT FT
(0.85 in) (1.66 in) (1.66 in) (0.85 in) Flat top Vacuum
63,6 mm 63,6 mm
25,4 mm
(1 in)
(2.5 in) (2.5 in)
W
NG®evo conveyor components 30325a 30398n
170 mm
made from engineered plastic resin 4,35 mm
Longer wearlife than acetal (6.69 in) (0.17 in) RTC VG
7 3 7 0 0 a
85 mm
Lower friction than acetal (3.35 in) Roller top Rubber insert
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21 30398a 30370a
norms for direct food contact
Less dust than with acetal chains
More.........
Notes: Schematic presentation of
all flush grid 25,4 mm (1”) pitch
Backflex radius: belts. Thickness: 8,7 mm (0.34 in)
25 mm (0.98 in) 30340a 30340a 30350a
Max load capacity (LFG):
25000 N/m (1700 lbs/ft.) 30360a
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in): 1,524 m (5 ft.)
30350a
width > 1700 mm (66.93 in): on request
e Co
2250 FT
FLAT TOP 8.7 mm nanc nstr
ucti
(0.34 in)
Maint
on
ALL
30365a
App
als
cat
M at
e ri
io n
li
30325a
2250 FG
25,4 mm
(1 in)
continue
30365b
25,4 mm
(1 in)
30360a
4,35 mm
(0.17 in)
FLUSH GRID
8.7 mm
(0.34 in)
25,4 mm
(1 in)
25,4 mm
(1 in)
4,35 mm
(0.17 in)
Example modules:
continue
30365b
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30365b
App
als
cat
M at
e ri
io n
li
30325a
2250 FG
P
back
30365a
30360a
C S
Example 1 notch
F
D
C C S
Example 2 notches
F
T
C C C S
Example 3 notches
F
Below you see an example of a questionnaire. If you select the belt version and tick the boxes of the
dimensions that you require, we know exactly what belt to produce!
SERIES 2250
Flat top
STYLE
Flush grid
Standard: multiples of 85 mm
WIDTH IN mm
Special: multiples of 17 mm
Special different: mm
Special different: mm
2 notches, distance D
DISTANCE FROM SIDE OF OUTER
Revision 001
back
30365a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
2,5 mm
(0.1 in)
ucti
Maint
on
ALL
30370a
App
als
cat
M at
e ri
io n
li
(0.44 in)
11,2 mm
W
170 mm
(6.69 in)
85 mm 8,7 mm
(3.35 in) (0.34 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
4,35 mm
(0.17 in)
Belt material: low friction acetal resin, grey colour
Rubber material: thermoplastic rubber, waterblue colour, 70 shore A.
Backflex radius: 30 mm (1.18 in)
Max load capacity: 25000 N/m (1700 lbs/ft.)
Pin material: PBT (white)
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.) VG 2250
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in): 1,524 m (5 ft.) Insert every pitch
width > 1700 mm (66.93 in): on request
3 0 3 9 5 a
Standard material
LFG (GREY) TPR (WATER BLUE) Weight:
8,7 Kg/m² (1.77 lbs/ft².)
Low friction
Thermoplastic rubber
acetal resin WIDTH W
ITEM DESCRIPTION
materials details: materials details: mm in
7 3 5 6 3 a 7 3 5 7 0 a 85 3.35 LFG2250FT-M0085VG
170 6.69 LFG2250FT-M0170VG
255 10.04 LFG2250FT-M0255VG
340 13.39 LFG2250FT-M0340VG
Other versions for 25,4 mm (1”) belts: 425 16.73 LFG2250FT-M0425VG
Information about
10,7
R 9,5 mm
R 9,5 mm
850 33.46 LFG2250FT-M0850VG
30325a 30360a
30398n
935 36.81 LFG2250FT-M0935VG
12,7
RTC
12,7
Roller top
4,35 4,35
1020 40.16 LFG2250FT-M1020VG
For insert every
2nd or 3th pitch, go to: 1105 43.50 LFG2250FT-M1105VG
1190 46.85 LFG2250FT-M1190VG
3 0 3 7 0 b 1275 50.20 LFG2250FT-M1275VG
30398a
1360 53.54 LFG2250FT-M1360VG
1445 56.89 LFG2250FT-M1445VG
Notes: Schematic presentation of all 1530 60.24 LFG2250FT-M1530VG
VG rubber insert 25,4 mm (1”) pitch 1615 63.58 LFG2250FT-M1615VG
belts. Thickness: 8,7 mm (0.34 in)
1700 66.93 LFG2250FT-M1700VG
1785 70.28 LFG2250FT-M1785VG
30370a Also available with side
indent. Go to: 1870 73.62 LFG2250FT-M1870VG
Revision 001
30370c
1955 76.97 LFG2250FT-M1955VG
3 0 3 8 0 a
30370d
2040 80.31 LFG2250FT-M2040VG
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
(0.10 in)
2,5 mm
ucti
Maint
on
ALL
30370b
App
als
cat
M at
e ri
io n
li
(0.44 in)
11,2 mm
W
170 mm
(6.69 in)
85 mm 8,7 mm
(3.35 in) (0.34 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
4,35 mm
(0.17 in)
3 0 3 9 5 a
Weight: Weight:
Other versions for 25,4 mm (1”) belts: 8,1 Kg/m² (1.66 lbs/ft².) 7,8 Kg/m² (1.59 lbs/ft².)
FT FT FG WIDTH W
Flat top Vacuum Flush grid ITEM DESCRIPTION ITEM DESCRIPTION
mm in
85 3.35 LFG2250FT-M0085VG-2 LFG2250FT-M0085VG-3
170 6.69 LFG2250FT-M0170VG-2 LFG2250FT-M0170VG-3
30325a 30398n 30360a
RTC 255 10.04 LFG2250FT-M0255VG-2 LFG2250FT-M0255VG-3
Roller top 340 13.39 LFG2250FT-M0340VG-2 LFG2250FT-M0340VG-3
425 16.73 LFG2250FT-M0425VG-2 LFG2250FT-M0425VG-3
510 20.08 LFG2250FT-M0510VG-2 LFG2250FT-M0510VG-3
Information about this 595 23.43 LFG2250FT-M0595VG-2 LFG2250FT-M0595VG-3
30398a
product is only available on
our Smart Guide® website. 680 26.77 LFG2250FT-M0680VG-2 LFG2250FT-M0680VG-3
765 30.12 LFG2250FT-M0765VG-2 LFG2250FT-M0765VG-3
Notes: Schematic presentation of all
VG rubber insert 25,4 mm (1”) pitch Standard material 850 33.46 LFG2250FT-M0850VG-2 LFG2250FT-M0850VG-3
belts. Thickness: 8,7 mm (0.34 in) LFG (GREY) 935 36.81 LFG2250FT-M0935VG-2 LFG2250FT-M0935VG-3
1020 40.16 LFG2250FT-M1020VG-2 LFG2250FT-M1020VG-3
30370a Low friction 1105 43.50 LFG2250FT-M1105VG-2 LFG2250FT-M1105VG-3
acetal resin
1190 46.85 LFG2250FT-M1190VG-2 LFG2250FT-M1190VG-3
10,7
30370c
2
30370d
materials details: 1275 50.20 LFG2250FT-M1275VG-2 LFG2250FT-M1275VG-3
W
170 7 3 5 6 3 a 1360 53.54 LFG2250FT-M1360VG-2 LFG2250FT-M1360VG-3
85 8,7
1445 56.89 LFG2250FT-M1445VG-2 LFG2250FT-M1445VG-3
R 9,5 mm
TPR (WATER BLUE) 1530 60.24 LFG2250FT-M1530VG-2 LFG2250FT-M1530VG-3
1615 63.58 LFG2250FT-M1615VG-2 LFG2250FT-M1615VG-3
Thermoplastic rubber 1700 66.93 LFG2250FT-M1700VG-2 LFG2250FT-M1700VG-3
12,7
4,35
Also available with For insert 1785 70.28 LFG2250FT-M1785VG-2 LFG2250FT-M1785VG-3
side indent. Go to: every pitch, go to: materials details: 1870 73.62 LFG2250FT-M1870VG-2 LFG2250FT-M1870VG-3
Revision 001
ucti
Maint
on
ALL
2,5 mm
30370c
(0.1 in)
App
als
cat
M at
e ri
io n
li
(0.44 in)
11,2 mm
5 mm
63,6 mm (0.2 in)
(2.5 in)
W
170 mm
(6.69 in)
85 mm 10 mm 8,7 mm
(3.35 in) (0.39 in) (0.34 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
Backflex radius: 30 mm (1.18 in)
Max load capacity: 25000 N/m (1700 lbs/ft.)
Pin material: PBT (white)
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.) 4,35 mm
(0.17 in)
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in): 1,524 m (5 ft.)
width > 1700 mm (66.93 in): on request
Standard material
LFG (GREY)
VG 2250 P1 VG2 2250 P1 VG3 2250 P1
Low friction Insert every pitch Insert every 2nd pitch Insert every 3th pitch
acetal resin
materials details:
7 3 5 6 3 a Information about this
product is only available on
TPR (WATER BLUE) our Smart Guide® website.
Thermoplastic rubber 3 0 3 9 5 a
materials details: Weight: Weight: Weight:
7 3 5 7 0 a 8,7 Kg/m² (1.77 lbs/ft².) 8,1 Kg/m² (1.66 lbs/ft².) 7,8 Kg/m² (1.59 lbs/ft².)
WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION
mm in
85 3.35 LFG2250FT-P-M0085VG LFG2250FT-P-M0085VG-2 LFG2250FT-P-M0085VG-3
170 6.69 LFG2250FT-P-M0170VG LFG2250FT-P-M0170VG-2 LFG2250FT-P-M0170VG-3
Also available with 255 10.04 LFG2250FT-P-M0255VG LFG2250FT-P-M0255VG-2 LFG2250FT-P-M0255VG-3
side indent. Go to: 340 13.39 LFG2250FT-P-M0340VG LFG2250FT-P-M0340VG-2 LFG2250FT-P-M0340VG-3
3 0 3 8 0 a 425 16.73 LFG2250FT-P-M0425VG LFG2250FT-P-M0425VG-2 LFG2250FT-P-M0425VG-3
510 20.08 LFG2250FT-P-M0510VG LFG2250FT-P-M0510VG-2 LFG2250FT-P-M0510VG-3
Other versions for 25,4 mm (1”) belts: 595 23.43 LFG2250FT-P-M0595VG LFG2250FT-P-M0595VG-2 LFG2250FT-P-M0595VG-3
FT FT FG 680 26.77 LFG2250FT-P-M0680VG LFG2250FT-P-M0680VG-2 LFG2250FT-P-M0680VG-3
Flat top Vacuum Flush grid
765 30.12 LFG2250FT-P-M0765VG LFG2250FT-P-M0765VG-2 LFG2250FT-P-M0765VG-3
850 33.46 LFG2250FT-P-M0850VG LFG2250FT-P-M0850VG-2 LFG2250FT-P-M0850VG-3
935 36.81 LFG2250FT-P-M0935VG LFG2250FT-P-M0935VG-2 LFG2250FT-P-M0935VG-3
30325a 30398n 30360a 1020 40.16 LFG2250FT-P-M1020VG LFG2250FT-P-M1020VG-2 LFG2250FT-P-M1020VG-3
RTC
Roller top 1105 43.50 LFG2250FT-P-M1105VG LFG2250FT-P-M1105VG-2 LFG2250FT-P-M1105VG-3
1190 46.85 LFG2250FT-P-M1190VG LFG2250FT-P-M1190VG-2 LFG2250FT-P-M1190VG-3
1275 50.20 LFG2250FT-P-M1275VG LFG2250FT-P-M1275VG-2 LFG2250FT-P-M1275VG-3
1360 53.54 LFG2250FT-P-M1360VG LFG2250FT-P-M1360VG-2 LFG2250FT-P-M1360VG-3
30398a
1445 56.89 LFG2250FT-P-M1445VG LFG2250FT-P-M1445VG-2 LFG2250FT-P-M1445VG-3
1530 60.24 LFG2250FT-P-M1530VG LFG2250FT-P-M1530VG-2 LFG2250FT-P-M1530VG-3
Notes: Schematic presentation of all
1615 63.58 LFG2250FT-P-M1615VG LFG2250FT-P-M1615VG-2 LFG2250FT-P-M1615VG-3
VG rubber insert 25,4 mm (1”) pitch
belts. Thickness: 8,7 mm (0.34 in) 1700 66.93 LFG2250FT-P-M1700VG LFG2250FT-P-M1700VG-2 LFG2250FT-P-M1700VG-3
1785 70.28 LFG2250FT-P-M1785VG LFG2250FT-P-M1785VG-2 LFG2250FT-P-M1785VG-3
30370a
1870 73.62 LFG2250FT-P-M1870VG LFG2250FT-P-M1870VG-2 LFG2250FT-P-M1870VG-3
Revision 001
30370c
1955 76.97 LFG2250FT-P-M1955VG LFG2250FT-P-M1955VG-2 LFG2250FT-P-M1955VG-3
30370d 2040 80.31 LFG2250FT-P-M2040VG LFG2250FT-P-M2040VG-2 LFG2250FT-P-M2040VG-3
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
2,5 mm
ucti
(0.1 in)
Maint
63,6 mm
on
(2.5 in) ALL
30370d
App
als
cat
M at
e ri
io n
li
(0.44 in)
11,2 mm
5 mm
42,1 mm (0.2 in)
(1.66 in)
W
170 mm
(6.69 in)
85 mm 10 mm 8,7 mm
(3.35 in) (0.39 in) (0.34 in)
22,5 mm
(0.89 in)
25,4 mm
70 shore A.
(1 in)
Backflex radius: 30 mm (1.18 in)
Max load capacity: 25000 N/m (1700 lbs/ft.)
Pin material: PBT (white)
Standard length: 4,35 mm
width > 340 mm (13.39 in) ≤ 1700 mm (66.93 in): 1,524 m (5 ft.)
width > 1700 mm (66.93 in): on request
Information about this
product is only available on
our Smart Guide® website.
30370c
1955 76.97 LFG2250FT-PT-M1955VG LFG2250FT-PT-M1955VG-2 LFG2250FT-PT-M1955VG-3
30370d 2040 80.31 LFG2250FT-PT-M2040VG LFG2250FT-PT-M2040VG-2 LFG2250FT-PT-M2040VG-3
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
2,5 mm
(0.1 in)
ucti
Maint
on
ALL
30380a
App
als
cat
M at
e ri
io n
li
(0.44 in)
11,2 mm
W
170 mm
(6.69 in)
85 mm 8,7 mm
(3.35 in) (0.34 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
43,75 mm 43,75 mm 4,35 mm
(1.72 in) (1.72 in) (0.17 in)
3 0 3 9 5 a
Standard material
LFG (GREY) Weight:
8,7 Kg/m² (1.77 lbs/ft².)
Low friction materials details:
WIDTH W
acetal resin 7 3 5 6 3 a ITEM DESCRIPTION
mm in
TPR (WATER BLUE) 255 10.04 LFG2250FT-M0255VGS
340 13.39 LFG2250FT-M0340VGS
materials details: Information about
Thermoplastic rubber 425 16.73 LFG2250FT-M0425VGS
7 3 5 7 0 a this product is only available
10,7
2
10,7
FT FT FG
R 9,5 mm
R 9,5 mm
850 33.46 LFG2250FT-M0850VGS
Flat top Vacuum Flush grid
12,7
4,35 4,35
2,5 mm
(0.1 in)
ucti
Maint
on
ALL
30380b
App
als
cat
M at
e ri
io n
li
(0.44 in)
11,2 mm
W
170 mm
(6.69 in)
85 mm 8,7 mm
(3.35 in) (0.34 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
43,75 mm 43,75 mm 4,35 mm
(1.72 in) (1.72 in) (0.17 in)
3 0 3 9 5 a
4,35
1020 40.16 LFG2250FT-M1020VGS-2 LFG2250FT-M1020VGS-3
For every insert,
go to: 1105 43.50 LFG2250FT-M1105VGS-2 LFG2250FT-M1105VGS-3
30325a 30398n 30360a
RTC 1190 46.85 LFG2250FT-M1190VGS-2 LFG2250FT-M1190VGS-3
Roller top 3 0 3 8 0 a
1275 50.20 LFG2250FT-M1275VGS-2 LFG2250FT-M1275VGS-3
1360 53.54 LFG2250FT-M1360VGS-2 LFG2250FT-M1360VGS-3
1445 56.89 LFG2250FT-M1445VGS-2 LFG2250FT-M1445VGS-3
30398a 1530 60.24 LFG2250FT-M1530VGS-2 LFG2250FT-M1530VGS-3
1615 63.58 LFG2250FT-M1615VGS-2 LFG2250FT-M1615VGS-3
1700 66.93 LFG2250FT-M1700VGS-2 LFG2250FT-M1700VGS-3
Notes: Schematic presentation of all
VG rubber insert 25,4 mm (1”) pitch 1785 70.28 LFG2250FT-M1785VGS-2 LFG2250FT-M1785VGS-3
For full width rubber
belts. Thickness: 8,7 mm (0.34 in) surface.Go to 1870 73.62 LFG2250FT-M1870VGS-2 LFG2250FT-M1870VGS-3
Revision 001
ucti
Notes:
Maint
on
• Sprockets with single keyway can be used ALL
30395a
S+ 1
+0
App
als
for belt widths up to 680 mm (27-in) and cat
M at
e ri
io n
li
temperature
Ø OD
differences of maximum 30°C (86°F).
ØP
• For wider belts or bigger temperature
differences, sprockets with square bores or
round bore with double keyway have to be
used. SQ 10 mm
New design 3 0 3 0 0 a
3 0 9 9 5 a
Features:
• New design with snap-assembly system included.
Set collars, go to:
• Very high strength.
• Split versions: quick and easy replacement. 5 4 6 3 0 a
• Foolproof design.
• Excellent wear and chemical resistance.
25 mm
• Recyclable. TO BE USED WITH 2250 SERIES
BELTS ONLY!
SPROCKETS FOR BELTS SERIES 2250
S+ 1
+0
Ø 30 Ø 35 Ø 40
Z
ITEM DESCRIPTION
14 2250-14R30M-DS 2250-14R35M-DS 2250-14R40M-DS
47,5 mm 16 2250-16R30M-DS 2250-16R35M-DS 2250-16R40M-DS
DF
18 2250-18R30M-DS 2250-18R35M-DS 2250-18R40M-DS
20 2250-20R30M-DS 2250-20R35M-DS 2250-20R40M-DS
20 2250-20S30M-DS - 2250-20S40M-DS
Material: reinforced polyamide (black), screws in stainless steel, nuts in nickel plated brass.
Note: These sprockets cannot be used for belt type 2253RTC and 2253FT.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30395b
Note:
App
als
cat
M at
e ri
• Sprockets with single keyway can be used for belt widths up to 680 mm (27-in) and temperature differences of maximum 30°C (86°F). io n
li
• For wider belts or bigger temperature differences, sprockets with square bores or round bore with double keyway have to be used.
Drive sprockets are manufactured for a tight fit on the shaft. To order single keyway sprockets capable of floating freely on the shaft,
just add the letter “P” (=plus) to the existing Item description. For example, Item description: 2250-14R30M-DPS
New design
3 0 9 9 0 a
Features:
• Very high strength. Ø OD ØP S
Z
• Split versions: quick and easy replacement. mm mm mm
• Foolproof design. 12 98 98,14 44,0
• Completely closed structure, easy to clean 14 114 114,18 52,0
and to disinfect.
16 130 130,2 60,0
• Excellent wear and chemical resistance.
• Recyclable. 18 146 146,27 68,5
20 162 162,37 76,5
25 mm
S+ 1
+0
Ø OD
ØP
DF
NOT SUITABLE FOR
2253 SERIES BELTS !
SPROCKETS FOR BELTS SERIES 2250
MACHINED DRIVE SPROCKETS - SPLIT
FIXED
Ø 18* (R18M) Ø 25 Ø 30 Ø 35 Ø 40
Z Ø 23* (R23M)
ITEM DESCRIPTION
12 - 2250-12R25M-DMS 2250-12R30M-DMS 2250-12R35M-DMS 2250-12R40M-DMS
14 - 2250-14R25M-DMS 2250-14R30M-DMS 2250-14R35M-DMS 2250-14R40M-DMS
16 - 2250-16R25M-DMS 2250-16R30M-DMS 2250-16R35M-DMS 2250-16R40M-DMS
18 - 2250-18R25M-DMS 2250-18R30M-DMS 2250-18R35M-DMS 2250-18R40M-DMS
20 - 2250-20R25M-DMS 2250-20R30M-DMS 2250-20R35M-DMS 2250-20R40M-DMS
3 0 3 9 5 c DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR BELT 2250
Notes: e Co
nanc nstr
• Sprockets with single keyway can be used for belt widths up to 680 mm and temperature differences of maximum 30°C.
ucti
Maint
• For wider belts or bigger temperature differences, sprockets with square bores or round bore with double keyway have
on
ALL
30395c
to be used.
App
als
cat
M at
e ri
io n
li
Features:
• New design with snap-assembly system included. Ø OD ØP S
Z
• Very high strength. mm mm mm
• Split versions: quick and easy replacement. 12 98 98,14 44,0
• Foolproof design.
• Excellent wear and chemical resistance. New design 14 113 114,18 52,0
• Recyclable. 3 0 9 9 5 a 16 129 130,2 60,0
18 145 146,27 68,5
20 162 162,37 76,5 NOT SUITABLE FOR
25 mm
2253 SERIES BELTS !
ITEM DESCRIPTION
ØP
14 2250-14R35M-DPS-K2 2250-14R40M-DPS-K2
16 2250-16R35M-DPS-K2 2250-16R40M-DPS-K2
18 2250-18R35M-DPS-K2 2250-18R40M-DPS-K2
DF 47,5 mm 20 2250-20R35M-DPS-K2 2250-20R40M-DPS-K2
Material: reinforced polyamide (black), screws in stainless steel, nuts in nickel
plated brass.
Features:
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
New design
• Excellent wear and chemical resistance. 3 0 9 9 0 a
NOT SUITABLE FOR
• Recyclable. 2253 SERIES BELTS !
Ø 30 Ø 40
Z
ITEM DESCRIPTION
12 2250-12R30M-DPM-K2 2250-12R40M-DPM-K2
Ø OD
ØP
14 2250-14R30M-DPM-K2 2250-14R40M-DPM-K2
16 2250-16R30M-DPM-K2 2250-16R40M-DPM-K2
18 2250-18R30M-DPM-K2 2250-18R40M-DPM-K2
20 2250-20R30M-DPM-K2 2250-20R40M-DPM-K2
DF
Material: polyamide (natural white).
12 2250-12S30M-DMS 2250-12S40M-DMS -
14 2250-14S30M-DMS 2250-14S40M-DMS -
16 2250-16S30M-DMS 2250-16S40M-DMS -
18 2250-18S30M-DMS 2250-18S40M-DMS 2250-18S60M-DMS
20 2250-20S30M-DMS 2250-20S40M-DMS 2250-20S60M-DMS
SQ
Material: polyamide (natural white), screws in stainless steel, bushings in brass.
ucti
Maint
on
ALL
30398a
App
als
cat
M at
e ri
io n
li
continue
30398b
W
76,2 mm 152,4 mm
8,7 mm
(3 in) (6 in) (0.34 in)
25,4 mm
(1 in)
12,7 mm
(0.5 in)
e Co
nanc nstr
ucti
Maint
on
ALL
30398b
App
als
Double speed cat
M at
e ri
io n
li
When the belt is moving and the rollers are in contact with a
fixed support area, the rollers will start rotating. This will result
in movement of the product with a speed that is twice the back
30398a
speed of the belt. This function is very useful when products
must be separated from each other.
This function enables the belt to run at lower speed, and that
improves belt life and reduces energy consumption.
When using a rotating disc underneath the roller top belt, you
can have optimum control of the rotation of the product.
Lateral movement
back
30398a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30398n
App
als
cat
M at
e ri
io n
li
W
152,4 mm
(6 in) 8,7 mm
76,2 mm
(3 in) (0.34 in)
Ø5 R=25 mm
0
(R =0.98 in)
25,4 mm
(1 in)
NG evo conveyor components
®
Bevelled edges:
WIDTH W
ITEM DESCRIPTION
mm in
W 305 12.00 NGE2253FT-K1200VAC43
3 0 3 9 5 a 381 15.00 NGE2253FT-K1500VAC43
152,4 mm 457 18.00 NGE2253FT-K1800VAC43
(6 in) 533 21.00 NGE2253FT-K2100VAC43
Other versions for 25,4 mm (1”) 76,2
belts: mm Information about this 610 24.00 NGE2253FT-K2400VAC43
8,7 m
product is only available on (0.34
FG (3VG
in) 686 27.00 NGE2253FT-K2700VAC43
FT our Smart Guide® website.
Flat top Flush grid Rubber insert 762 30.00 NGE2253FT-K3000VAC43
838 33.00 NGE2253FT-K3300VAC43
Standard materials R=25 mm
914 36.00 NGE2253FT-K3600VAC43
NGE (GREY BLUE) 991 39.00 NGE2253FT-K3900VAC43 (R =0.98 in)
30325a 30360a 30370a
RTC 1067 42.00 NGE2253FT-K4200VAC43
Roller top New Generation® 1143 45.00 NGE2253FT-K4500VAC43
1219 48.00 NGE2253FT-K4800VAC43
Revision 001
3 0 3 9 8 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
Go to:
3 0 3 9 8 a
Go to:
3 0 3 9 8 n
(0.50 in)
12,7mm
2251 FT
2251 FT 2252 FT Modules
Modules 2252 FT
76,2 mm
85 mm 3”
3 0 4 4 0 a 3 0 4 4 5 a 3 0 4 2 0 a
3 0 4 3 0 a
3 0 4 8 1 a
3 0 4 9 0 a
SIDEFLEXING CHAINBELT:
3 0 7 0 0 a 3 0 7 1 0 a
Revision 001
e
12,7 mm
ucti
Maint
on
(0.5 in)
ALL
30420a
App
als
made from engineered plastic resin
cat
M at
e ri
io n
li
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
25,4 mm
(1 in)
Less dust than with acetal chains
More.........
6,35 mm
(0.25 in)
Pin material: PBT (white)
5 mm
(0.2 in)
L
W 10 mm 12,7 mm
(0.39 in) (0.5 in)
25,4 mm
(1 in)
6,35 mm
(0.25 in)
3 0 5 5 0 a
Notes: Schematic presentation of
all flat top 25,4 mm (1”) pitch belts.
Thickness: 12,7 mm (0.50 in) Other versions Standard material
for 25,4 mm (1”) belts:
30420a 30420a 30430a NGE (GREY BLUE)
FG VG LBP
30440a
Flush grid Rubber insert (low pressure) Information about this
30450b
New Generation® product is only available on
our Smart Guide® website.
Revision 001
30450b
materials details:
30430a 30481a 30490a 30500a
7 3 5 6 3 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
A ALL
30430a
App
als
cat
M at
e ri
io n
li
R
5 mm
B (0.2 in)
W
10 mm 12,7 mm
(0.39 in) (0.5 in)
Information about this
NG evo conveyor components
®
product is only available on
made from engineered plastic resin
Longer wearlife than acetal
our Smart Guide® website.
7 3 7 0 0 a
Lower friction than acetal
Standard material
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
NGE (GREY BLUE)
25,4 mm
(1 in)
stated by EC1935/2004 and FDA CFR21
norms for direct food contact New Generation®
Less dust than with acetal chains
More......... 6,35 mm
WT
(0.25 in) materials details:
Pin material: PBT (white)
Backflex radius: 30 mm (1.18 in) 7 3 5 6 3 a
A B WIDTH W WIDTH WT R MAX LOAD CAPACITY WEIGHT
ITEM DESCRIPTION MATERIAL
mm in mm in mm in mm in mm in N lbs Kg/m lbs/ft.
NGE2251FT-PT-K330T 63 2.48 42,1 1.66 93 3.66 127 5 80 3.15 2900 650 1,7 1.14
NGE
NGE2251FT-PT-K430TL 78,6 3.095 43,2 1.7 109,5 4.31 160 6.3 150 5.91 3800 850 2,2 1.5
Grey Blue
NGE2251FT-PT-K730TL 116,7 4.6 43,2 1.7 185 7.3 236,2 9.3 150 5.91 6200 1400 3,2 2.2
Standard length: 120 pitches (3,048 m - 10 ft.)
WIDER VERSIONS
5 mm
(0.2 in)
42,1 mm 20 mm 9 mm
(1.66 in) (0.79 in) (0.35 in)
W 43 mm
(1.69 in)
Wt = W + 43 mm
(Wt = W + 1.69 in)
127,35 mm
(5.01 in)
21,5 mm 10 mm 12,7 mm
(0.85 in) (0.39 in) (0.5 in)
25,4 mm
(1 in)
6,35 mm
30450b
425 16.73 NGE2251FT-PT-M0425T
30430a 30481a 30490a 30500a 510 20.08 NGE2251FT-PT-M0510T
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
LFG
on
ALL
30440a
App
als
cat
M at
e ri
io n
li
W
170 mm
(6.69 in)
85 mm
12,7 mm
(3.35 in)
(0.5 in)
25,4 mm
Longer wearlife than acetal
7 3 7 0 0 a
(1 in)
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as 6,35 mm
stated by EC1935/2004 and FDA CFR21 (0.25 in)
norms for direct food contact
Less dust than with acetal chains
More.........
Standard materials
WIDTH W ITEM DESCRIPTION
NGE (GREY BLUE)
mm in NGE (GREY BLUE) LFG (GREY)
New Generation® 85 3.35 NGE2251FT-M0085 LFG2251FT-M0085
170 6.69 NGE2251FT-M0170 LFG2251FT-M0170
255 10.04 NGE2251FT-M0255 LFG2251FT-M0255
LFG (GREY)
340 13.39 NGE2251FT-M0340 LFG2251FT-M0340
Low friction 425 16.73 NGE2251FT-M0425 LFG2251FT-M0425
acetal resin 510 20.08 NGE2251FT-M0510 LFG2251FT-M0510
595 23.43 NGE2251FT-M0595 LFG2251FT-M0595
materials details:
680 26.77 NGE2251FT-M0680 LFG2251FT-M0680
7 3 5 6 3 a 3 0 5 5 0 a 765 30.12 NGE2251FT-M0765 LFG2251FT-M0765
850 33.46 NGE2251FT-M0850 LFG2251FT-M0850
Other versions
935 36.81 NGE2251FT-M0935 LFG2251FT-M0935
for 25,4 mm (1”) belts:
1020 40.16 NGE2251FT-M1020 LFG2251FT-M1020
FG VG LBP Information about this 1105 43.50 NGE2251FT-M1105 LFG2251FT-M1105
Flush grid Rubber insert (low pressure) product is only available on 1190 46.85 NGE2251FT-M1190 LFG2251FT-M1190
our Smart Guide® website.
1275 50.20 NGE2251FT-M1275 LFG2251FT-M1275
1360 53.54 NGE2251FT-M1360 LFG2251FT-M1360
76,2 mm
30481a 30490a 30500a 1445 56.89 NGE2251FT-M1445 LFG2251FT-M1445
(3in)
1530 60.24 NGE2251FT-M1530 LFG2251FT-M1530
Notes: Schematic presentation of 1615 63.58 NGE2251FT-M1615 LFG2251FT-M1615
all flat top 25,4 mm (1”) pitch belts. 1700 66.93 NGE2251FT-M1700 LFG2251FT-M1700
Thickness: 12,7 mm (0.50 in)
1785 70.28 NGE2251FT-M1785 LFG2251FT-M1785
30420a 30420a 30430a 1870 73.62 NGE2251FT-M1870 LFG2251FT-M1870
30440a
1955 76.97 NGE2251FT-M1955 LFG2251FT-M1955
Also available imperial 2040 80.31 NGE2251FT-M2040 LFG2251FT-M2040
30450b
widths.Go to: 2125 83.66 NGE2251FT-M2125 LFG2251FT-M2125
Revision 001
30450b
3 0 4 4 5 a 2210 87.01 NGE2251FT-M2210 LFG2251FT-M2210
30430a
2295 90.35 NGE2251FT-M2295 LFG2251FT-M2295
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30445a
App
als
cat
M at
e ri
io n
li
W
152,4 mm
(6 in)
76,2 mm
(3 in) 12,7 mm
(0.5 in)
25,4 mm
(1 in)
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains 6,35 mm
More......... (0.25 in)
Standard material
NGE (GREY BLUE) WIDTH W
ITEM DESCRIPTION
mm in
New Generation® 76 3.00 NGE2252FT-K300
152 6.00 NGE2252FT-K600
229 9.00 NGE2252FT-K900
305 12.00 NGE2252FT-K1200
381 15.00 NGE2252FT-K1500
457 18.00 NGE2252FT-K1800
533 21.00 NGE2252FT-K2100
610 24.00 NGE2252FT-K2400
3 0 5 5 0 a 686 27.00 NGE2252FT-K2700
762 30.00 NGE2252FT-K3000
838 33.00 NGE2252FT-K3300
914 36.00 NGE2252FT-K3600
Other versions
for 25,4 mm (1”) belts: 991 39.00 NGE2252FT-K3900
1067 42.00 NGE2252FT-K4200
FG VG LBP 1143 45.00 NGE2252FT-K4500
Flush grid Rubber insert (low pressure)
1219 48.00 NGE2252FT-K4800
1295 51.00 NGE2252FT-K5100
1372 54.00 NGE2252FT-K5400
30481a 30490a 30500a
85 mm 1448 57.00 NGE2252FT-K5700
(3.35 in) 1524 60.00 NGE2252FT-K6000
1600 63.00 NGE2252FT-K6300
Notes: Schematic presentation of
1676 66.00 NGE2252FT-K6600
all flat top 25,4 mm (1”) pitch belts.
Thickness: 12,7 mm (0.50 in) 1753 69.00 NGE2252FT-K6900
1829 72.00 NGE2252FT-K7200
30420a 30420a 30430a 1905 75.00 NGE2252FT-K7500
30440a Also available in 1981 78.00 NGE2252FT-K7800
30450b metric widths. 2057 81.00 NGE2252FT-K8100
Go to: Information about this 2134 84.00 NGE2252FT-K8400
product is only available on
Revision 001
30450b
3 0 4 4 0 a our Smart Guide® website. 2210 87.00 NGE2252FT-K8700
30430a
2286 90.00 NGE2252FT-K9000
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30450b
2251FT-PT
App
als
cat
M at
e ri
io n
li
5 mm
21,5 mm (0.2 in)
42,1 mm
(0.85 in) (1.66 in)
63,6 mm
(2.5 in)
2251FT-PT2 10 mm 12,7 mm
(0.39 in) (0.5 in)
63,6 mm 63,6 mm
(2.5 in) (2.5 in)
25,4 mm
(1 in)
Good chemical resistance 170 mm
High abrasion resistance 85 mm (6.69 in)
It meets the requirement for materials as (3.35 in)
stated by EC1935/2004 and FDA CFR21
6,35 mm
norms for direct food contact
(0.25 in)
Less dust than with acetal chains
More.........
Backflex radius:
25 mm (0.98 in)
Max load capacity:
38000 N/m (2600 Ibs/ft.)
Weight: 12,5 Kg/m2 (2.55 lbs/ft2)
Pin material: PBT (white)
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
width > 340 mm (13.39 in) ≤ 935 mm (36.81 in): 1,524 m (5 ft.)
width > 935 mm (36.81 in): on request
WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION
mm in
3 0 5 5 0 a 85 3.35 NGE2251FT-PT-M0085 -
170 6.69 NGE2251FT-PT-M0170 NGE2251FT-PT2-M0170
255 10.04 NGE2251FT-PT-M0255 NGE2251FT-PT2-M0255
340 13.39 NGE2251FT-PT-M0340 NGE2251FT-PT2-M0340
425 16.73 NGE2251FT-PT-M0425 NGE2251FT-PT2-M0425
Other versions 510 20.08 NGE2251FT-PT-M0510 NGE2251FT-PT2-M0510
for 25,4 mm (1”) belts: 595 23.43 NGE2251FT-PT-M0595 NGE2251FT-PT2-M0595
680 26.77 NGE2251FT-PT-M0680 NGE2251FT-PT2-M0680
Information about this FG VG LBP
product is only available on our Flush grid Rubber insert (low pressure) 765 30.12 NGE2251FT-PT-M0765 NGE2251FT-PT2-M0765
Smart Guide® website. 850 33.46 NGE2251FT-PT-M0850 NGE2251FT-PT2-M0850
935 36.81 NGE2251FT-PT-M0935 NGE2251FT-PT2-M0935
Standard materials
30481a 30490a 30500a
1020 40.16 NGE2251FT-PT-M1020 NGE2251FT-PT2-M1020
NGE (GREY BLUE) 1105 43.50 NGE2251FT-PT-M1105 NGE2251FT-PT2-M1105
1190 46.85 NGE2251FT-PT-M1190 NGE2251FT-PT2-M1190
Notes: Schematic presentation of
New Generation® 1275 50.20 NGE2251FT-PT-M1275 NGE2251FT-PT2-M1275
all flat top 25,4 mm (1”) pitch belts.
Thickness: 12,7 mm (0.50 in) 1360 53.54 NGE2251FT-PT-M1360 NGE2251FT-PT2-M1360
LFG (GREY) 1445 56.89 NGE2251FT-PT-M1445 NGE2251FT-PT2-M1445
30420a 30420a 30430a
1530 60.24 NGE2251FT-PT-M1530 NGE2251FT-PT2-M1530
Low friction 30440a
1615 63.58 NGE2251FT-PT-M1615 NGE2251FT-PT2-M1615
acetal resin 30450b
1700 66.93 NGE2251FT-PT-M1700 NGE2251FT-PT2-M1700
Revision 001
ucti
Maint
on
ALL
30481a
App
als
cat
M at
e ri
io n
li
W
152,4 mm
(6 in)
76,2 mm
(0.5 in)
(3 in) 12,7 mm
25,4 mm
(1 in)
NG evo conveyor components
®
Standard material
NGE (GREY BLUE) WIDTH W
ITEM DESCRIPTION
mm in
New Generation® 76 3.00 NGE2252PT-K300
152 6.00 NGE2252PT-K600
materials details: 229 9.00 NGE2252PT-K900
7 3 5 6 3 a 305 12.00 NGE2252PT-K1200
381 15.00 NGE2252PT-K1500
457 18.00 NGE2252PT-K1800
533 21.00 NGE2252PT-K2100
3 0 5 5 0 a 610 24.00 NGE2252PT-K2400
686 27.00 NGE2252PT-K2700
762 30.00 NGE2252PT-K3000
838 33.00 NGE2252PT-K3300
Other versions 914 36.00 NGE2252PT-K3600
for 25,4 mm (1”) belts:
991 39.00 NGE2252PT-K3900
FT VG LBP 1067 42.00 NGE2252PT-K4200
Flat top Rubber insert (Low pressure)
1143 45.00 NGE2252PT-K4500
1219 48.00 NGE2252PT-K4800
Revision 001
2,5 mm
(0.1 in)
ucti
Maint
on
ALL
30490a
App
als
cat
M at
e ri
io n
li
15,2 mm
(0.6 in)
W
170 mm
(6.69 in)
85 mm
12,7 mm
(3.35 in) (0.5 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
6,35 mm
(0.25 in)
Belt material: low friction acetal resin, grey colour
Rubber material: thermoplastic rubber, waterblue colour, 70 shore A.
Backflex radius: 30 mm (1.18 in)
Max load capacity: 38000 N/m (2600 Ibs/ft.)
Pin material: PBT (white)
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
width > 340 mm (13.39 in) ≤ 935 mm (36.81 in): 1,524 m (5 ft.)
width > 935 mm (36.81 in): on request VG 2251
Insert every pitch
3 0 5 5 0 a
Standard material
LFG (GREY)
Low friction
acetal resin Weight:
13,5 Kg/m2 (2.75 lbs/ft2.)
materials details:
7 3 5 6 3 a WIDTH W
ITEM DESCRIPTION
mm in
TPR (WATER BLUE)
85 3.35 LFG2251FT-M0085VG
170 6.69 LFG2251FT-M0170VG
Thermoplastic rubber
255 10.04 LFG2251FT-M0255VG
Information about 340 13.39 LFG2251FT-M0340VG
10,7
materials details:
2
10,7
Flat top Flush grid (Low pressure) 4,35 4,35 850 33.46 LFG2251FT-M0850VG
For insert every 935 36.81 LFG2251FT-M0935VG
2nd or 3th pitch, go to:
1020 40.16 LFG2251FT-M1020VG
3 0 4 9 0 b 1105 43.50 LFG2251FT-M1105VG
30440a 30481a 30500a
1190 46.85 LFG2251FT-M1190VG
1275 50.20 LFG2251FT-M1275VG
Notes: Schematic presentation of all 1360 53.54 LFG2251FT-M1360VG
VG rubber insert 25,4 mm (1”) pitch 1445 56.89 LFG2251FT-M1445VG
belts. Thickness: 12,7 mm (½”)
1530 60.24 LFG2251FT-M1530VG
Also available with side 1615 63.58 LFG2251FT-M1615VG
30490a
indent. Go to: 1700 66.93 LFG2251FT-M1700VG
Revision 001
30490c
1785 70.28 LFG2251FT-M1785VG
3 0 4 9 5 a
30490d
1870 73.62 LFG2251FT-M1870VG
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
2,5 mm
(0.1 in)
ucti
Maint
on
ALL
30490b
App
als
cat
M at
e ri
io n
li
15,2 mm
(0.6 in)
W
170 mm
(6.69 in)
85 mm
12,7 mm
(3.35 in)
(0.5 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
6,35 mm
(0.25 in)
Belt material: low friction acetal resin, grey colour
Rubber material: thermoplastic rubber, waterblue colour, 70 shore A.
Backflex radius: 30 mm (1.18 in)
Max load capacity: 38000 N/m (2600 Ibs/ft.)
Pin material: PBT (white)
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
width > 340 mm (13.39 in) ≤ 935 mm (36.81 in): 1,524 m (5 ft.)
width > 935 mm (36.81 in): on request
VG2 2251 VG3 2251
Insert every 2nd pitch Insert every 3th pitch
3 0 5 5 0 a
Standard material
LFG (GREY)
Low friction
acetal resin Weight:
Weight:
materials details: 13,0 Kg/m2 (2.65 lbs/ft2.) 12,8 Kg/m2 (2.61 lbs/ft2.)
7 3 5 6 3 a WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION
mm in
TPR (WATER BLUE)
85 3.35 LFG2251FT-M0085VG-2 LFG2251FT-M0085VG-3
Thermoplastic rubber 170 6.69 LFG2251FT-M0170VG-2 LFG2251FT-M0170VG-3
255 10.04 LFG2251FT-M0255VG-2 LFG2251FT-M0255VG-3
materials details: 340 13.39 LFG2251FT-M0340VG-2 LFG2251FT-M0340VG-3
Information about 425 16.73
7 3 5 7 0 a LFG2251FT-M0425VG-2 LFG2251FT-M0425VG-3
10,7
LFG2251FT-M0510VG-2 LFG2251FT-M0510VG-3
Other versions on our SmartW Guide® website.
170
595 23.43 LFG2251FT-M0595VG-2 LFG2251FT-M0595VG-3
for 25,4 mm (1”) belts: 85 8,7
680 26.77 LFG2251FT-M0680VG-2 LFG2251FT-M0680VG-3
FT FG LBP
R 9,5 mm
765 30.12 LFG2251FT-M0765VG-2 LFG2251FT-M0765VG-3
Flat top Flush grid (Low pressure)
850 33.46 LFG2251FT-M0850VG-2 LFG2251FT-M0850VG-3
12,7
30490c
indent. Go to:
1785 70.28 LFG2251FT-M1785VG-2 LFG2251FT-M1785VG-3
3 0 4 9 5 a
30490d
1870 73.62 LFG2251FT-M1870VG-2 LFG2251FT-M1870VG-3
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
2,5 mm
Maint
(0.1 in)
on
ALL
30490c
App
als
cat
M at
e ri
io n
li
15,2 mm
(0.6 in)
5 mm
63,6 mm (0.2 in)
(2.5 in)
W
170 mm
(6.69 in)
85 mm 10 mm 12,7 mm
(3.35 in) (0.39 in) (0.5 in)
22,5 mm
(0.89 in)
25,4 mm
grey colour
(1 in)
Rubber material: thermoplastic rubber,
waterblue colour, 70 shore A.
Backflex radius: 30 mm (1.18 in)
Max load capacity: 38000 N/m (2600 Ibs/ft.) 6,35 mm
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
width > 340 mm (13.39 in) ≤ 935 mm (36.81 in): 1,524 m (5 ft.)
width > 935 mm (36.81 in): on request
Standard material
LFG (GREY)
30490c
1785 70.28 LFG2251FT-P-M1785VG LFG2251FT-P-M1785VG-2 LFG2251FT-P-M1785VG-3
30490d 1870 73.62 LFG2251FT-P-M1870VG LFG2251FT-P-M1870VG-2 LFG2251FT-P-M1870VG-3
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
2,5 mm
(0.1 in)
63,6 mm
on
(2.5 in) ALL
30490d
App
als
cat
M at
e ri
io n
li
15,2 mm
(0.6 in)
5 mm
42,1 mm (0.2 in)
(1.66 in) W
170 mm
(6.69 in)
85 mm 10 mm 12,7 mm
(3.35 in) (0.39 in) (0.5 in)
22,5 mm
(0.89 in)
25,4 mm
grey colour
(1 in)
Rubber material: thermoplastic rubber,
waterblue colour, 70 shore A.
Backflex radius: 30 mm (1.18 in)
Max load capacity: 38000 N/m (2600 Ibs/ft.) 6,35 mm
Standard length:
width ≤ 340 mm (13.39 in): 3,048 m (10 ft.)
width > 340 mm (13.39 in) ≤ 935 mm (36.81 in): 1,524 m (5 ft.)
width > 935 mm (36.81 in): on request
Standard material
LFG (GREY)
Low friction
acetal resin 3 0 5 5 0 a Weight: Weight: Weight:
materials details: 13,5 Kg/m2 (2.75 lbs/ft2.) 13,0 (2.65 lbs/ft2.) 12,8 Kg/m2 (2.61 lbs/ft2.)
7 3 5 6 3 a WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION
TPR (WATER BLUE) mm in
85 3.35 LFG2251FT-PT-M0085VG LFG2251FT-PT-M0085VG-2 LFG2251FT-PT-M0085VG-3
Thermoplastic rubber 170 6.69 LFG2251FT-PT-M0170VG LFG2251FT-PT-M0170VG-2 LFG2251FT-PT-M0170VG-3
255 10.04 LFG2251FT-PT-M0255VG LFG2251FT-PT-M0255VG-2 LFG2251FT-PT-M0255VG-3
materials details: 340 13.39 LFG2251FT-PT-M0340VG LFG2251FT-PT-M0340VG-2 LFG2251FT-PT-M0340VG-3
7 3 5 7 0 a 425 16.73 LFG2251FT-PT-M0425VG LFG2251FT-PT-M0425VG-2 LFG2251FT-PT-M0425VG-3
510 20.08 LFG2251FT-PT-M0510VG LFG2251FT-PT-M0510VG-2 LFG2251FT-PT-M0510VG-3
Other versions 595 23.43 LFG2251FT-PT-M0595VG LFG2251FT-PT-M0595VG-2 LFG2251FT-PT-M0595VG-3
for 25,4 mm (1”) belts: LFG2251FT-PT-M0680VG-3
680 26.77 LFG2251FT-PT-M0680VG LFG2251FT-PT-M0680VG-2
FT FG LBP 765 30.12 LFG2251FT-PT-M0765VG LFG2251FT-PT-M0765VG-2 LFG2251FT-PT-M0765VG-3
Flat top Flush grid (Low pressure)
850 33.46 LFG2251FT-PT-M0850VG LFG2251FT-PT-M0850VG-2 LFG2251FT-PT-M0850VG-3
935 36.81 LFG2251FT-PT-M0935VG LFG2251FT-PT-M0935VG-2 LFG2251FT-PT-M0935VG-3
1020 40.16 LFG2251FT-PT-M1020VG LFG2251FT-PT-M1020VG-2 LFG2251FT-PT-M1020VG-3
30440a 30481a 30500a 1105 43.50 LFG2251FT-PT-M1105VG LFG2251FT-PT-M1105VG-2 LFG2251FT-PT-M1105VG-3
1190 46.85 LFG2251FT-PT-M1190VG LFG2251FT-PT-M1190VG-2 LFG2251FT-PT-M1190VG-3
1275 50.20 LFG2251FT-PT-M1275VG LFG2251FT-PT-M1275VG-2 LFG2251FT-PT-M1275VG-3
Notes: Schematic presentation of all 1360 53.54 LFG2251FT-PT-M1360VG LFG2251FT-PT-M1360VG-2 LFG2251FT-PT-M1360VG-3
VG rubber insert 25,4 mm (1”) pitch 1445 56.89 LFG2251FT-PT-M1445VG LFG2251FT-PT-M1445VG-2 LFG2251FT-PT-M1445VG-3
belts. Thickness: 12,7 mm (½”)
1530 60.24 LFG2251FT-PT-M1530VG LFG2251FT-PT-M1530VG-2 LFG2251FT-PT-M1530VG-3
1615 63.58 LFG2251FT-PT-M1615VG LFG2251FT-PT-M1615VG-2 LFG2251FT-PT-M1615VG-3
30490a
1700 66.93 LFG2251FT-PT-M1700VG LFG2251FT-PT-M1700VG-2 LFG2251FT-PT-M1700VG-3
Revision 001
30490c
1785 70.28 LFG2251FT-PT-M1785VG LFG2251FT-PT-M1785VG-2 LFG2251FT-PT-M1785VG-3
30490d 1870 73.62 LFG2251FT-PT-M1870VG LFG2251FT-PT-M1870VG-2 LFG2251FT-PT-M1870VG-3
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
2,5 mm
(0.1 in)
ucti
Maint
on
ALL
30495a
App
als
cat
M at
e ri
io n
li
15,2 mm
(0.6 in)
W
170 mm
(6.69 in)
85 mm
12,7 mm
(3.35 in) (0.5 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
6,35 mm
44 mm 44 mm (0.25 in)
(1.73 in) (1.73 in)
Standard material
LFG (GREY)
Low friction
acetal resin
Weight:
materials details:
13,5 Kg/m2 (2.75 lbs/ft2.)
7 3 5 6 3 a
WIDTH W
TPR (WATER BLUE) ITEM DESCRIPTION
mm in
255 10.04 LFG2251FT-M0255VGS
Thermoplastic rubber
10,7
3 0 5 5 0 a
2
4,35
FT FG LBP
4,35
850 33.46 LFG2251FT-M0850VGS
For insert every
Flat top Flush grid (Low pressure) 2nd or 3th pitch, go to: 935 36.81 LFG2251FT-M0935VGS
1020 40.16 LFG2251FT-M1020VGS
3 0 4 9 5 b
1105 43.50 LFG2251FT-M1105VGS
30440a 30481a 30500a
1190 46.85 LFG2251FT-M1190VGS
1275 50.20 LFG2251FT-M1275VGS
1360 53.54 LFG2251FT-M1360VGS
Notes: Schematic presentation of all 1445 56.89 LFG2251FT-M1445VGS
VG rubber insert 25,4 mm (1”) pitch 1530 60.24 LFG2251FT-M1530VGS
belts. Thickness: 12,7 mm (½”) 1615 63.58 LFG2251FT-M1615VGS
For full rubber surface
Information about 1700 66.93 LFG2251FT-M1700VGS
Revision 001
width. Go to:
30495a this product is only available 1785 70.28 LFG2251FT-M1785VGS
30495d 3 0 4 9 0 a on our Smart Guide® website. 1870 73.62 LFG2251FT-M1870VGS
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
2,5 mm
(0.1 in)
ucti
Maint
on
ALL
30495b
App
als
cat
M at
e ri
io n
li
15,2 mm
(0.6 in)
W
170 mm
(6.69 in)
85 mm
12,7 mm
(3.35 in) (0.5 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
44 mm 44 mm 6,35 mm
(1.73 in) (1.73 in) (0.25 in)
3 0 5 5 0 a
Standard material
LFG (GREY)
Low friction
acetal resin Weight: Weight:
13,0 Kg/m2 (2.65 lbs/ft2.) 12,8 Kg/m2 (2.61 lbs/ft2.)
materials details:
WIDTH W
7 3 5 6 3 a ITEM DESCRIPTION ITEM DESCRIPTION
mm in
TPR (WATER BLUE) 170 6.69 LFG2251FT-M0170VGS-2 LFG2251FT-M0170VGS-3
255 10.04 LFG2251FT-M0255VGS-2 LFG2251FT-M0255VGS-3
Thermoplastic rubber 340 13.39 LFG2251FT-M0340VGS-2 LFG2251FT-M0340VGS-3
Information about
425 16.73 LFG2251FT-M0425VGS-2 LFG2251FT-M0425VGS-3
materials details: this product is only available
10,7
Flat top Flush grid (Low pressure) For every insert, go to: 935
4,35
36.81 LFG2251FT-M0935VGS-2 LFG2251FT-M0935VGS-3
1020 40.16 LFG2251FT-M1020VGS-2 LFG2251FT-M1020VGS-3
3 0 4 9 5 a
1105 43.50 LFG2251FT-M1105VGS-2 LFG2251FT-M1105VGS-3
30440a 30481a 30500a
1190 46.85 LFG2251FT-M1190VGS-2 LFG2251FT-M1190VGS-3
1275 50.20 LFG2251FT-M1275VGS-2 LFG2251FT-M1275VGS-3
1360 53.54 LFG2251FT-M1360VGS-2 LFG2251FT-M1360VGS-3
1445 56.89 LFG2251FT-M1445VGS-2 LFG2251FT-M1445VGS-3
Notes: Schematic presentation of all
VG rubber insert 25,4 mm (1”) pitch 1530 60.24 LFG2251FT-M1530VGS-2 LFG2251FT-M1530VGS-3
belts. Thickness: 12,7 mm (½”) 1615 63.58 LFG2251FT-M1615VGS-2 LFG2251FT-M1615VGS-3
For full rubber surface
1700 66.93 LFG2251FT-M1700VGS-2 LFG2251FT-M1700VGS-3
Revision 001
width. Go to:
1785 70.28 LFG2251FT-M1785VGS-2 LFG2251FT-M1785VGS-3
3 0 4 9 0 a
30495a
ucti
Maint
on
ALL
30495d
(0.10 in)
2,5 mm
63,6 mm
App
als
(2.50 in) cat
M at
e ri
io n
li
(0.60 in)
15,2 mm
5 mm
42,1 mm (0.20 in)
(1.66 in) W
170 mm
(6.69 in)
85 mm
10 mm 12,7 mm
(3.35 in) (0.39 in) (0.5 in)
22,5 mm
(0.89 in)
25,4 mm
(1 in)
VERSION WITH SIDE INDENT
Belt material: low friction acetal resin,
grey colour
Rubber material: thermoplastic rubber, 44 mm 44 mm
6,35 mm
(0.25 in)
waterblue colour, 70 shore A. (1.73 in) (1.73 in)
30495a
1785 70.28 LFG2251FT-PT-M1785VGS LFG2251FT-PT-M1785VGS-2 LFG2251FT-PT-M1785VGS-3
30495d
1870 73.62 LFG2251FT-PT-M1870VGS LFG2251FT-PT-M1870VGS-2 LFG2251FT-PT-M1870VGS-3
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
Ø 10,9 mm
(Ø 0.43 in)
LFG ALL
30500a
App
als
cat
M at
e ri
io n
li
27,2 mm
(1.07 in)
W
170 mm
(6.69 in)
85 mm 12,7 mm
(3.35 in) (0.5 in)
25,4 mm
(1 in)
NG evo conveyor components
®
ROLLER
GUIDE
Standard materials
NGE (GREY BLUE) LFG (GREY)
Information about
this product is only available Low friction materials details:
New Generation®
acetal resin
on our Smart Guide® website. 7 3 5 6 3 a
For roller guides.
Go to: WIDTH W ITEM DESCRIPTION
5 2 5 1 0 a 3 0 5 5 0 a mm in NGE (GREY BLUE) LFG (GREY)
85 3.35 NGE2251LBP-M0085 LFG2251LBP-M0085
170 6.69 NGE2251LBP-M0170 LFG2251LBP-M0170
Other versions 255 10.04 NGE2251LBP-M0255 LFG2251LBP-M0255
for 25,4 mm (1”) belts:
340 13.39 NGE2251LBP-M0340 LFG2251LBP-M0340
FT FG VG 425 16.73
Flat top Flush grid Rubber insert NGE2251LBP-M0425 LFG2251LBP-M0425
510 20.08 NGE2251LBP-M0510 LFG2251LBP-M0510
595 23.43 NGE2251LBP-M0595 LFG2251LBP-M0595
680 26.77 NGE2251LBP-M0680 LFG2251LBP-M0680
30440a 30481a 30490a
765 30.12 NGE2251LBP-M0765 LFG2251LBP-M0765
850 33.46 NGE2251LBP-M0850 LFG2251LBP-M0850
Notes: Schematic presentation of 935 36.81 NGE2251LBP-M0935 LFG2251LBP-M0935
all LBP low pressure 25,4 mm (1”) 1020 40.16 NGE2251LBP-M1020 LFG2251LBP-M1020
pitch belts. Thickness: 12,7 mm (½”) 1105 43.50 NGE2251LBP-M1105 LFG2251LBP-M1105
1190 46.85 NGE2251LBP-M1190 LFG2251LBP-M1190
Revision 001
30500a
1275 50.20 NGE2251LBP-M1275 LFG2251LBP-M1275
30500b
1360 53.54 NGE2251LBP-M1360 LFG2251LBP-M1360
Wider widths available upon request. LBP belts cannot be cut-to-width.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30500b
App
als
cat
M at
e ri
Ø 10,9 mm
(Ø 0.43 in)
io n
li
63,6 mm
(2.5 in)
27,2 mm
(1.07 in)
5 mm
42,1 mm (0.2 in)
(1.66 in)
170 mm
(6.69 in)
85 mm 10 mm 12,7 mm
(3.35 in) (0.39 in) (0.5 in)
25,4 mm
Longer wearlife than acetal
7 3 7 0 0 a
(1 in)
Lower friction than acetal
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact 6,35 mm
Less dust than with acetal chains (0.25 in)
More.........
ROLLER
GUIDE
30500a
materials details: 1275 50.20 NGE2251LBP-PT-M1275
30500b 7 3 5 6 3 a 1360 53.54 NGE2251LBP-PT-M1360
Wider widths available upon request. LBP belts cannot be cut-to-width.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
Notes:
ucti
Maint
on
• Sprockets with single keyway can be used for belt widths up to 680 mm (27-in) and temperature differences of maximum ALL
30550a
App
30°C (86°F).
als
cat
M at
e ri
io n
li
• For wider belts or bigger temperature differences, sprockets with square bores or round bore with double keyway have to
be used.
Drive sprockets are manufactured for a tight fit on the shaft. To order single keyway sprockets capable of floating freely on the
shaft, just add the letter “P” (=plus) to the existing Item description. For example, 2251-14R30M-DPS
Features:
• Split versions: quick and easy replacement. Information about
• Foolproof design. this product is only available
• Excellent wear and chemical resistance. on our Smart Guide® website.
• Recyclable.
Ø OD ØP S
Z mm mm mm
14 113,68 114,18 50,7
See belts:
16 130 130,2 58,7 1” Pitch (25,4mm)
18 146 146,3 66,7 Thickness=12,7mm.
20 162 162,4 74,8
3 0 4 1 0 a
ucti
Maint
• Sprockets with single keyway can be used for belt widths up to 680 mm (27-in) and temperature differences of maximum
on
30°C (86°F). ALL
30550b
App
als
• For wider belts or bigger temperature differences, sprockets with square bores or round bore with double keyway have to be cat
M at
e ri
io n
li
used.
Drive sprockets are manufactured for a tight fit on the shaft. To order single keyway sprockets capable of floating freely on the
shaft, just add the letter “P” (=plus) to the existing Item description. For example, 2251-12R25M-DPMS
New design
3 0 9 9 0 a 25 mm
Ø OD ØP S
Features: Z mm mm mm
S+ 1
+0
• Very high strength.
12 97,9 98,14 42,7
• Split versions: quick and easy replacement.
• Foolproof design. 13 105,54 106,14 46,7
• Completely closed structure, easy to clean 14 114 114,18 50,7
Ø OD
ØP
and to disinfect. 15 122,16 122,2 54,6
• Excellent wear and chemical resistance. 16 130 130,2 58,7
• Recyclable. 18 146 146,28 66,7
20 162 162,37 74,8
DF 21 171 170,42 78,9
21 2251-21S40M-DMS 2251-21S60M-DMS
3 0 4 1 0 a 3 0 5 5 0 a
Material: polyamide (natural white), screws in stainless steel, bushings in brass.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30610a
App
als
cat
M at
e ri
io n
li
(0.63 in)
16 mm
24 mm
(0.94 in)
W WIDTH W
8 mm ITEM DESCRIPTION
(0.31 in) mm in
229 9.00 PPG2500RR-K900
305 12.00 PPG2500RR-K1200
381 15.00 PPG2500RR-K1500
457 18.00 PPG2500RR-K1800
533 21.00 PPG2500RR-K2100
610 24.00 PPG2500RR-K2400
686 27.00 PPG2500RR-K2700
(50,8 mm)
ucti
Maint
mm in mm in mm in Note:
on
ALL
30615a
LFG-COMB2500-M152 152,4 6 63,5 2.5 21,6 0.85 - Use shouldered screws (included) for fixing the
App
als
comb to the conveyor construction. cat
LFG-COMB2500-M190 190,5 7.5 101,3 3.99 38,1 1.5 M at
e ri
io n
li
PAB-COMB2500-M165 165,1 6.5 130,8 5.15 38,1 1.5 - Two caps are supplied with each comb to cover the
long holes.
151,3 mm
(5.96 in)
36,9 mm 77,5 mm X2 included
(1.45 in) (3.05 in)
(0.28 in)
2 mm 4,5 mm 6,5 mm
7 mm
50,8 mm 12,7 mm (0.18 in) (0.26 in)
(0.08 in)
14 -0,1 mm
(Ø 0.39 in)
Ø 10 mm
M5
LH
-0
-0
50,8 mm 20,5 mm
LF
DRIVE SPROCKETS
FOR BELT 2500RR
Features:
• Split versions: quick and easy replacement.
• Excellent wear and chemical resistance.
15 • Recyclable.
9
MOLDED DRIVE SPROCKETS SQUARE BORE - SPLIT
FLOATING
S ++ 01
Ø OD
Z Z
ITEM DESCRIPTION mm mm mm
13 - 2500-13S90M-DS - 13 213,6 212,3 98
16 2500-16S65M-DS 2500-16S90M-DS 2500-16S120M-DS 16 263,7 260,4 122,3
SQ 44,5
Material: acetal.
New design
3 0 9 9 0 a
50 mm Features: Information about
9 mm
• Very high strength. this product is only available
• Split versions: quick and easy replacement. on our Smart Guide® website.
S+ 1
+0
• Foolproof design.
• Completely closed structure, easy to clean See also the sprockets
Ø OD
ØM
ØP
SQ
SPLIT SPROCKETS SQUARE BORE
FLOATING
ucti
Maint
on
ALL
30615b
App
als
cat
M at
e ri
io n
li
Features: Set collars, go to:
• Completely closed structure, easy to clean 5 4 6 3 0 a
and to disinfect.
25 mm • Excellent wear and chemical resistance.
9 mm • Recyclable.
S+ 1
+0
ØM
40X40
ØP
Z
ITEM DESCRIPTION
10 2500-10S40M-DM
Material: polyamide (natural white).
SQ
25 mm
9 mm
Ø 40 Ø 65 Ø 90
Z
ITEM DESCRIPTION
10 - 2500-10R65M-DPM-K2 -
S+ 1
+0
13 - 2500-13R65M-DPM-K2 2500-13R90M-DPM-K2
16 - 2500-16R65M-DPM-K2 2500-16R90M-DPM-K2
Ø OD
10 2500-10R40M-RM - -
Material: polyamide (natural white).
Revision 001
DF
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30617a
App
als
cat
M at
e ri
io n
li
W
150 mm
(5.9 in)
75 mm
12,7 mm
(2.95 in) (0.5 in)
50,8 mm
(2 in)
6,35 mm
(0.25 in)
Polypropylene
materials details:
7 3 5 6 5 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
3 0 6 1 8 a DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR BELT 2502DT
e Co
nanc nstr
ucti
Maint
on
ALL
30618a
App
als
cat
M at
e ri
io n
li
Features:
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
40 mm
17 mm
S+ 1
+0
Ø OD
ØP
SQ
Pin Ø 9 mm
ucti
Maint
on
200 mm
(7.87 in)
11 mm
(0.43 in)
ALL
30620a
App
als
cat
M at
e ri
io n
li
50,8 mm
(2 in)
100 mm
22 mm
(3.94 in)
(0.87 in)
PATENTED
3 0 6 4 0 a WIDTH W
ITEM DESCRIPTION
mm in
VERSION STANDARD (LFG MATERIAL) 300 11.81 LFG2508FTS-M0300
Strength and weight data for other materials available on request. 400 15.75 LFG2508FTS-M0400
Backflex radius: 55 mm (2.17 in) 500 19.69 LFG2508FTS-M0500
Max load capacity: 80 kN/m (5440 lbs) 600 23.62 LFG2508FTS-M0600
Weight: 22,5 kg/m2 (4.59 lbs/ft2.) 700 27.56 LFG2508FTS-M0700
Standard length: 800 31.50 LFG2508FTS-M0800
width ≤ 800 mm (31.5 in): 20 pitches (1,016 m) 900 35.43 LFG2508FTS-M0900
width > 800 mm (31.5 in): 15 pitches (0,762 m) 1000 39.37 LFG2508FTS-M1000
Pin material: PBT (white). 1100 43.31 LFG2508FTS-M1100
Steel pins optionally available.
1200 47.24 LFG2508FTS-M1200
1300 51.18 LFG2508FTS-M1300
1400 55.12 LFG2508FTS-M1400
1500 59.06 LFG2508FTS-M1500
1600 62.99 LFG2508FTS-M1600
Information about
1700 66.93 LFG2508FTS-M1700
this product is only available
1800 70.87 LFG2508FTS-M1800
on our Smart Guide® website.
1900 74.80 LFG2508FTS-M1900
2000 78.74 LFG2508FTS-M2000
Standard material 2100 82.68 LFG2508FTS-M2100
2200 86.61 LFG2508FTS-M2200
LFG (GREY) 2300 90.55 LFG2508FTS-M2300
2400 94.49 LFG2508FTS-M2400
Low friction acetal resin 2500 98.43 LFG2508FTS-M2500
2600 102.36 LFG2508FTS-M2600
materials details: 2700 106.30 LFG2508FTS-M2700
7 3 5 6 3 a 2800 110.24 LFG2508FTS-M2800
2900 114.17 LFG2508FTS-M2900
Also available into 3000 118.11 LFG2508FTS-M3000
PPLG (LIGHT GREY) 3100 122.05 LFG2508FTS-M3100
3200 125.98 LFG2508FTS-M3200
Polypropylene 3300 129.92 LFG2508FTS-M3300
3400 133.86 LFG2508FTS-M3400
3500 137.80 LFG2508FTS-M3500
POM-AS (BLACK) 3600 141.73 LFG2508FTS-M3600
3700 145.67 LFG2508FTS-M3700
Anti-static acetal 3800 149.61 LFG2508FTS-M3800
3900 153.54 LFG2508FTS-M3900
POM-EC (BLACK) 4000 157.48 LFG2508FTS-M4000
4100 161.42 LFG2508FTS-M4100
Electrically 4200 165.35 LFG2508FTS-M4200
conductive acetal 4300 169.29 LFG2508FTS-M4300
4400 173.23 LFG2508FTS-M4400
PP-FR-EC (BLACK) 4500 177.17 LFG2508FTS-M4500
Flame retardant 4600 181.10 LFG2508FTS-M4600
electrically 4700 185.04 LFG2508FTS-M4700
conductive polypropylene 4800 188.98 LFG2508FTS-M4800
Revision 001
3 0 6 4 0 a DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR BELT 2508
e Co
The sprockets for 2508 series have a polygonal shape to provide optimum belt support. nanc nstr
ucti
Maint
This is important for belts that have a large pitch and work with very high loads.
on
ALL
30640a
App
als
Features: cat
M at
e ri
io n
li
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
30 mm
12 mm
S+ 1
+0
Ø OD
ØP
SQ
SQ
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
Pin Ø 10 mm
200 mm
ucti
15 mm
Maint
(7.87 in)
on
(0.59 in)
ALL
30645a
App
als
cat
M at
e ri
io n
li
63,5 mm
(2.50 in)
100 mm 30 mm
PATENTED
(3.94 in)
(1.18 in)
WIDTH W
3 0 6 5 0 a ITEM DESCRIPTION
mm in
100 3.94 LFG2630FTS-M0100
VERSION STANDARD (LFG MATERIAL) 300 11.81 LFG2630FTS-M0300
Strength and weight data for other materials available on request. 400 15.75 LFG2630FTS-M0400
Backflex radius: 60 mm (2.36 in) 500 19.69 LFG2630FTS-M0500
Max load capacity: 115 kN/m (7800 lbs) 600 23.62 LFG2630FTS-M0600
Weight: 29,5 kg/m2 (6.02 lbs/ft2.) 700 27.56 LFG2630FTS-M0700
Standard length: 800 31.50 LFG2630FTS-M0800
width ≤ 800 mm (31.5 in): 16 pitches (1,016 m) 900 35.43 LFG2630FTS-M0900
width > 800 mm (31.5 in): 12 pitches (0,762 m) 1000 39.37 LFG2630FTS-M1000
Pin material: PBT (white). 1100 43.31 LFG2630FTS-M1100
Steel pins optionally available.
1200 47.24 LFG2630FTS-M1200
1300 51.18 LFG2630FTS-M1300
1400 55.12 LFG2630FTS-M1400
1500 59.06 LFG2630FTS-M1500
Information about
1600 62.99 LFG2630FTS-M1600
this product is only available
1700 66.93 LFG2630FTS-M1700
on our Smart Guide® website.
1800 70.87 LFG2630FTS-M1800
1900 74.80 LFG2630FTS-M1900
Standard material 2000 78.74 LFG2630FTS-M2000
LFG (GREY) 2100 82.68 LFG2630FTS-M2100
2200 86.61 LFG2630FTS-M2200
Low friction 2300 90.55 LFG2630FTS-M2300
acetal resin 2400 94.49 LFG2630FTS-M2400
2500 98.43 LFG2630FTS-M2500
materials details:
2600 102.36 LFG2630FTS-M2600
7 3 5 6 3 a 2700 106.30 LFG2630FTS-M2700
2800 110.24 LFG2630FTS-M2800
Also available into 2900 114.17 LFG2630FTS-M2900
3000 118.11 LFG2630FTS-M3000
PPLG (COLOR LIGHT GREY)
3100 122.05 LFG2630FTS-M3100
3200 125.98 LFG2630FTS-M3200
Polypropylene 3300 129.92 LFG2630FTS-M3300
3400 133.86 LFG2630FTS-M3400
POM-AS (BLACK) 3500 137.80 LFG2630FTS-M3500
3600 141.73 LFG2630FTS-M3600
Anti-static acetal 3700 145.67 LFG2630FTS-M3700
3800 149.61 LFG2630FTS-M3800
3900 153.54 LFG2630FTS-M3900
POM-EC (BLACK) 4000 157.48 LFG2630FTS-M4000
4100 161.42 LFG2630FTS-M4100
Electrically
4200 165.35 LFG2630FTS-M4200
conductive acetal
4300 169.29 LFG2630FTS-M4300
4400 173.23 LFG2630FTS-M4400
PP-FR-EC (BLACK)
4500 177.17 LFG2630FTS-M4500
Flame retardant 4600 181.10 LFG2630FTS-M4600
electrically 4700 185.04 LFG2630FTS-M4700
conductive polypropylene
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
212 0mm 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
S+ 1
+0
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
3 0 6 5 0 a DRIVE SPROCKETS
Ø OD
ØP
www.SystemPlastSmartGuide.com FOR BELT 2630
e Co
The sprockets for 2630 series have a polygonal shape to provide optimum belt support. nanc nstr
e
This is important for belts that have a large pitch and work with very high loads.
ucti
Maint
on
ALL
30650a
Features:
App
als
SQ
cat
M at
e ri
• Completely closed structure, easy to clean io n
li
and to disinfect.
• Excellent wear and chemical resistance. 40 mm
• Recyclable. 20 mm
S+ 1
+0
Ø OD
ØP
SQ
On request we can also provide machined sprockets with a different number of teeth or a different bore size.
60X60 90X90 Ø OD ØP S
Z Z
ITEM DESCRIPTION mm mm mm
10 2630-10S60M-D - 10 203,4 205,49 88,2
13 2630-13S60M-D 2630-13S90M-D 13 265,3 265,34 118,2
15 2630-15S60M-D 2630-15S90M-D 15 306,7 305,42 138,2
Material: reinforced polyamide (black).
ucti
Maint
on
LFG ALL
30700a
45 mm
App
als
12,2 mm
(1.77 in)
(0.48 in)
cat
M at
RD=150 mm
e ri
42,1 mm
io n
li
13,5 mm
(0.53 in)
(1.66 in) (RD=5.91 in)
21,4 mm
(0.84 in)
(0.34 in)
8,7 mm
(1.06 in)
27 mm
25,4 mm Ø 8 mm
(1 in) (Ø 0.31 in)
Applications:
The chainbelt magnetic system with
L
closed top plates is best suited for
NG evo conveyor components
®
conveying glass and pet containers (for
R.
made from engineered plastic resin
example PET bottles with petaloid base).
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
2260M FT - 2260M FG
page code:
Good chemical resistance TRAVEL
High abrasion resistance 5 0 0 9 1 a
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains 45 mm
More......... (1.77 in) 2251M FT
12,2 mm
(0.48 in)
42,1 mm RD=150 mm
page code:
13,5 mm
(0.53 in)
LFG
(0.34 in)
8,7 mm
(1.06 in)
27 mm
25,4 mm Ø 8 mm
(1 in) (Ø 0.31 in)
K 134
L
K 134
R.
Applications:
Flush grid chainbelt for magnetic system K 134
with 20% open area is ideal for can TRAVEL
conveying applications.
3 0 7 1 5 a
K 134
45 mm
2251 M FT (1.77 in)
16,2 mm
(0.64 in)
42,1 mm RD=200 mm
(1.66 in)
13,5 mm
(0.53 in)
(RD=7.87 in)
LFG
25,4 mm
(1 in)
12,7 mm
(0.50 in)
(1.06 in)
27 mm
25,4 mm Ø 8 mm
(1 in) (Ø 0.31 in)
L
R.
NGE2251FT-M-K450 NGE Grey Blue 114,3 4.5 500 2,2 1.48 materials details:
Standard length: 120 pitches (3,048 m - 10 ft.) Max load capacity: (LFG-FT): 2000N (450lbs) - (LFG-FG): 1900N (425lbs) 7 3 5 6 3 a
Other widths available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30710a
App
als
2250 TAB FT cat
M at
e ri
io n
li
LFG
45 mm
(1.77 in)
12,2 mm
(0.48 in)
42,1 mm RD=140 mm
(Ø 0.47 in)
(1.66 in) (RD=5.51 in)
12 mm
24,7 mm
(0.97 in)
(0.34 in)
8,7 mm
(0.98 in)
25 mm 25,4 mm
(1 in)
STANDARD TRACKS
FOR TAB SYSTEM
Applications:
The chainbelt magnetic system with closed top plates is best
suited for conveying glass and PET containers (for example
L
PET bottles with petaloid base).
Pin material: Austenic Steel
R.
TRAVEL
2251 TAB FT 45 mm
(1.77 in)
LFG
16,2 mm
(0.64 in)
42,1 mm RD=200 mm
(RD=7.87 in)
(Ø 0.47 in)
(1.66 in)
12 mm
28,7 mm
(1.13 in)
(0.50 in)
12,7 mm
(0.98 in)
25 mm
25,4 mm Ø 8 mm
61 mm (1 in) (Ø 0.31 in)
(2.40 in)
STANDARD TRACKS
FOR TAB SYSTEM
L
Applications:
The chainbelt with closed top plates is best suited for conveying glass Information about this
and PET containers (for example PET bottles with petaloid base). product is only available on our
Smart Guide® website.
Pin Material: Martensitic Stainless Steel
WIDTH L WEIGHT Standard materials
R
ITEM DESCRIPTION MATERIAL
mm in MIN. Kg/m lbs/ft. NGE (GREY BLUE)
K 134
LFG2250FT-TAB-K330 LFG Grey 83,8 3.3 500 1,75 1.17
NGE2250FT-TAB-K330 NGE Grey Blue 83,8 3.3 500 1,75 1.17 New Generation®
LFG2250FT-TAB-K450 LFG Grey 114,3 4.5 500 2,04 1.37
K 134
NGE2250FT-TAB-K450 NGE Grey Blue 114,3 4.5 500 2,04 1.37
LFG (GREY)
LFG2251FT-TAB-K330 LFG Grey 83,8 3.3 500 1,75 1.17
Low friction
NGE2251FT-TAB-K330 NGE Grey Blue 83,8 3.3 500 1,75 1.17
acetal resin
LFG2251FT-TAB-K450 LFG Grey 114,3 4.5 500 2,19 1.47
Revision 001
NGE2251FT-TAB-K450 NGE Grey Blue 114,3 4.5 500 2,19 1.47 materials details:
Standard length: 120 pitches (3,048 m - 10 ft.) Max load capacity: (LFG-FT): 2000N (450lbs) - (LFG-FG): 1900N (425lbs) 7 3 5 6 3 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30715a
App
als
cat
M at
e ri
49 mm io n
li
11 mm
S+ 1
+0
Ø OD
Features: ØP
• Split versions: quick and easy replacement.
• Foolproof design.
• Excellent wear and chemical resistance. DF
• Recyclable.
45 mm
11 mm
S++ 10
Information about
New design this product is only available
on our Smart Guide® website.
3 0 9 9 0 a
Ø OD
Features:
ØM
ØP
3 0 7 1 5 b DRIVE SPROCKETS
www.SystemPlastSmartGuide.com FOR CHAINBELTS 1” PITCH (25,4 mm)
2250 TAB FT - 2251 M FT - 2251 TAB FT - 2260 M FT - 2260 M FG
e Co
nanc nstr
ucti
Maint
on
ALL
30715b
App
als
cat
M at
e ri
io n
li
Features:
• Split versions: quick and easy replacement.
• Foolproof design.
• Excellent wear and chemical resistance.
• Recyclable. See belts with 8,7mm
thickness:
3 0 3 0 0 a
See belts with 12,7mm
thickness:
3 0 4 1 0 a
49 mm
11 mm
S+ 1
+0
Ø OD ØP S
Z mm mm mm
16 130,9 128,9 67,8
DF 18 146,8 144,8 75,7
19 156,3 154,3 80,5
ucti
Maint
on
ALL
30720a
Reduce
App
als
cat
noise level M at
e ri
io n
li
by 12 dB
4,35 mm
(0.34 in)
K330 - 83,8 mm
8,7 mm
(0.17 in)
(0.34 in)
8,7 mm
RD=15 mm
(K330 - 3.3 in)
(RD=0.59 in)
5,2 mm
(0.2 in)
12,7 mm
NG evo conveyor components
®
78,8 mm (0.5 in)
made from engineered plastic resin (3.10 in)
Longer wearlife than acetal
7 3 7 0 0 a
Lower friction than acetal
80,5 mm
(3.17 in)
Good chemical resistance
High abrasion resistance
It meets the requirement for materials as
stated by EC1935/2004 and FDA CFR21
norms for direct food contact
Less dust than with acetal chains
More.........
Features:
L
This system offers a unique solution for sideflexing
R.
applications in plants with modular conveyors.
Applications:
• To be used in the dry end of the line where
bottles or cans run in lanes separated by guides.
• The short pitch makes in-line transfers possible.
Weight: 13,7 kg/m2 (2.8 lbs/ft2.)
Pin material: Ferritic Stainless Steel TRAVEL
Standard material
NGE (GREY BLUE)
New Generation®
materials details:
7 3 5 6 3 a
Other versions
for 12,7 mm (½”) belts:
FT FG
Flat top Flush grid
5 0 0 8 0 a
30110a 30120a 30100a page code: 3 0 1 7 5 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
3 0 7 2 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
Go to:
3 0 6 2 0 a
Go to:
3 0 6 4 5 a
Picture by courtesy of
Revision 001
3 0 7 3 0 a
SIDEFLEXING BELT 2256 - PITCH: 25,4 mm (1”) VERSION WITH RUBBER INSERTS
3 0 7 3 5 a
1,6
3 0 7 4 5 a 3 0 7 5 0 a
1,0
3 0 7 5 5 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30730a
App
als
cat
M at
e ri
io n
li
W
152,4 mm 12,7 mm
(6 in) (0.5 in)
76,2 mm
(3 in) 6,35 mm
(0.25 in)
25,4 mm
(1 in)
R. R.
Pin material: PBT (white)
Open surface: 29% (straight)
Standard length:
width ≤ 24 in: 3,048 m (10 ft.)
width > 24 in: 1,524 m (5 ft.)
3 mm (0.11 in)
Just a clip for pin retention. Attached to the pin retention clip is Attached to the pin retention clip is a Attached to the pin retention clip is a
a slider shoe that can reduce friction TAB that holds the belt down in the TAB-Positioner combination that holds
and act as a wear part. curves. the belt down in the curves but also
guides the belt on straight sections.
WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION
mm in
76 3 LFB2256C-K300 LFB2256S-K300 LFB2256TAB-K300 LFB2256TP-K300
152 6 LFB2256C-K600 LFB2256S-K600 LFB2256TAB-K600 LFB2256TP-K600
229 9 LFB2256C-K900 LFB2256S-K900 LFB2256TAB-K900 LFB2256TP-K900
305 12 LFB2256C-K1200 LFB2256S-K1200 LFB2256TAB-K1200 LFB2256TP-K1200
381 15 LFB2256C-K1500 LFB2256S-K1500 LFB2256TAB-K1500 LFB2256TP-K1500
457 18 LFB2256C-K1800 LFB2256S-K1800 LFB2256TAB-K1800 LFB2256TP-K1800
Revision 001
Mainte
ucti
25,5 mm
(1 in)
on
24,2 mm
B for moreALL
information
ALL
(0.95 in)
or technical support
90
App
C
,5
ls
°
19,15 mm
ccaatt
e ri a
MMaatt
9,3 mm
3,5 mm
(0.36 in)
(0.14 in)
iioonn
li
(0.75 in)
12 mm
(0.47 in)
152,4 mm
12,7 mm
(6 in)
76,2 mm (0.5 in)
(3 in) 6,35 mm
(0.25 in)
25,4 mm
(1 in)
Available Widths: 4” single track, 6” single track, R. R.
6” + multiple of 3” (9”, 12”, 15”, …)
Opening Size (approximate):
8.5x7.3 mm (0.33”x0.28”)
Open Area: 29% (once straight)
Drive Method: Hinge-driven
Materials: POM e NGE
WIDTH W B C R MIN. MAX LOAD CAPACITY BACK FLEX RADIUS WEIGHT This belt is bi-directional and can make
STRAIGHT CURVE both left and right turns. Even S-curves
mm in mm in mm in mm in mm in Kg/m2 lbs/ft. are possible if the load allows for that.
N/m lbs/ft. N lbs
101,6* 4 53,1 2.09 39,3 1.55 250 9.84 The belt is available with several clips
30000 2000 2000 450 25 0.98 7,75 1.58 and guiding systems.
152,4* 6 103,9 4.09 90,1 3.55 335 13.19
228,6 9 180,1 7.09 166,3 6.55 500 19.69
304,8 12 256,3 10.09 242,5 9.55 690 27.17
381 15 332,5 13.09 318,7 12.55 870 34.25
30000 2000 2000 450 25 0.98 7,75 1.58
457,2 18 408,7 16.09 394,9 15.55 1050 41.34
533,4 21 484,9 19.09 471,1 18.55 1225 48.23
609,6 24 561,1 22.09 547,3 21.55 1400 55.12
* Single track
3 0 7 4 0 a
7 3 7 0 0 a
made from engineered plastic resin..
Just a clip for pin retention. Attached to the pin retention clip is
* Single track a slider shoe that can reduce friction Standard materials
and act as a wear part.
WIDTH W LFB (BLUE)
ITEM DESCRIPTION ITEM DESCRIPTION
mm in
Low friction acetal resin
101,6* 4 LFB2256ST-C-K400 LFB2256ST-S-K400
152,4* 6 LFB2256ST-C-K600 LFB2256ST-S-K600
228,6 9 NGE (GREY BLUE)
LFB2256ST-C-K900 LFB2256ST-S-K900
304,8 12 LFB2256ST-C-K1200 LFB2256ST-S-K1200
381 15 LFB2256ST-C-K1500 LFB2256ST-S-K1500 New Generation®
457,2 18 LFB2256ST-C-K1800 LFB2256ST-S-K1800
Revision 001
ucti
Maint
on
ALL
30735a
App
als
cat
M at
e ri
W io n
li
152,4 mm 12,7 mm
(6 in) (0.5 in)
76,2 mm
6,35 mm
(3 in)
(0.25 in)
25,4 mm
(0.83 in)
21 mm
(1 in)
R. R.
Without TAB With slider shoe With TAB With TAB & Positioner
"C" version "S" version "T" version "TP" version
W W
W 8,4 mm (0.33 in) 9,1 mm (0.36 in)
W 3 mm (0.11 in) 3 mm (0.11 in) 3 mm (0.11 in)
4,7 mm (0.18 in)
Just a clip for pin retention. Attached to the pin retention clip is Attached to the pin retention clip is a Attached to the pin retention clip is a
a slider shoe that can reduce friction TAB that holds the belt down in the TAB-Positioner combination that holds
and act as a wear part. curves. the belt down in the curves but also
guides the belt on straight sections.
WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION
mm in
76 3 LFB2256C-K300VG LFB2256S-K300VG LFB2256TAB-K300VG LFB2256TP-K300VG
152 6 LFB2256C-K600VG LFB2256S-K600VG LFB2256TAB-K600VG LFB2256TP-K600VG
229 9 LFB2256C-K900VG LFB2256S-K900VG LFB2256TAB-K900VG LFB2256TP-K900VG
305 12 LFB2256C-K1200VG LFB2256S-K1200VG LFB2256TAB-K1200VG LFB2256TP-K1200VG
381 15 LFB2256C-K1500VG LFB2256S-K1500VG LFB2256TAB-K1500VG LFB2256TP-K1500VG
457 18 LFB2256C-K1800VG LFB2256S-K1800VG LFB2256TAB-K1800VG LFB2256TP-K1800VG
Revision 001
ucti
3 0 9 9 0 a
Maint
on
ALL
30740a
App
als
Features: cat
M at
e ri
io n
li
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable. Set collars, go to:
5 4 6 3 0 a
S ++ 10 18,55 mm
ØP Ø OD Ø M S
Z mm mm mm mm
Ø OD
12 98,1 100 82 41
15 122,2 124,3 106,3 53
18 146,3 147,8 129 65
DF
Ø 25 Ø 30 Ø 40
Z
ITEM DESCRIPTION
10 2256-10R25M-DPMS 2256-10R30M-DPMS -
12 2256-12R25M-DPMS 2256-12R30M-DPMS 2256-12R40M-DPMS
15 2256-15R25M-DPMS 2256-15R30M-DPMS 2256-15R40M-DPMS
18 2256-18R25M-DPMS 2256-18R30M-DPMS 2256-18R40M-DPMS
10 2256-10R25M-RMS 2256-10R30M-RMS -
12 2256-12R25M-RMS 2256-12R30M-RMS 2256-12R40M-RMS
15 2256-15R25M-RMS 2256-15R30M-RMS 2256-15R40M-RMS
18 2256-18R25M-RMS 2256-18R30M-RMS 2256-18R40M-RMS
MACHINED DRIVE SPROCKETS SQUARE BORE - SPLIT
FLOATING
3 0 7 4 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
Go to:
5 2 5 1 0 a
Go to:
3 0 4 9 0 a
Go to:
5 2 6 7 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
* *
• Can also be used in S-curves
on
ALL
30745a
App
als
cat
M at
W
e ri
io n
li
170 mm
(6.69 in)
85 mm
(3.35 in) 12,7 mm
(0.5 in)
31,75 mm
R. R.
(1.25 in)
Features for 2551:
• Radius – width ratio min. 1,0 for tight curves
Weight: 8.2 kg/m2 (1.67 lbs/f2.)
Features for both:
• Optimum product support 22,5 mm
*
(0.89 in)
• Strong design
• For left or right L- or U-turns
• Easy installation and maintenance
(0.59 in)
15 mm
Pin Material: PBT white Type 2551 - Curve ratio 1,0
(0.43 in)
11 mm
Standard length: 6 mm
(0.24 in)
width ≤ 850 mm (33.46 in): 1,524 m (5 ft.)
*
13 mm
(0.51 in)
width > 850 mm (33.46 in): on request W
170 mm
(6.69 in) 12,7 mm
85 mm (0.5 in)
(3.35 in)
Information about this
product is only available
31,75 mm
(1.25 in)
on our Smart Guide® website. R.
Standard material
LFG (GREY)
2351 2551
Without TAB With TAB 2 sides Without TAB With TAB 1 side
WIDTH W WIDTH W
ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION
mm in mm in
255 10.04 LFG2351-M0255 LFG2351TAB-M0255 - - - -
340 13.39 LFG2351-M0340 LFG2351TAB-M0340 340 13.39 LFG2551-M0340 LFG2551TAB-M0340
425 16.73 LFG2351-M0425 LFG2351TAB-M0425 425 16.73 LFG2551-M0425 LFG2551TAB-M0425
510 20.08 LFG2351-M0510 LFG2351TAB-M0510 510 20.08 LFG2551-M0510 LFG2551TAB-M0510
595 23.43 LFG2351-M0595 LFG2351TAB-M0595 595 23.43 LFG2551-M0595 LFG2551TAB-M0595
680 26.77 LFG2351-M0680 LFG2351TAB-M0680 680 26.77 LFG2551-M0680 LFG2551TAB-M0680
Revision 001
ucti
Maint
Features for 2451:
on
ALL
30750a
App
als
Weight: 9.7 kg/m2 (1.98 lbs/ft2.) cat
M at
e ri
io n
li
W
170 mm
(6.69 in)
85 mm 12,7 mm
(3.34 in) (0.5 in)
31,75 mm
(1.25 in)
R.
12 mm
*
Features for 2651:
(0.59 in)
(0.47 in)
15 mm
• Radius – width ratio min. 1.0 for tight curves
Weight: 8,8 kg/m2 (1.8 lbs/ft2.)
*
• Optimum product support
• Easy installation and maintenance W
Pin Material: PBT white 255 mm
Standard length: 170 mm
(10.04 in)
12,7 mm
width ≤ 850 mm (33.46 in): 1,524 m (5 ft.) (6.69 in) (0.5 in)
width > 850 mm (33.46 in): on request
R.
(0.59 in)
15 mm
3 0 7 6 0 a 22,5 mm
(0.43 in)
11 mm
materials details:
765 30.12 LFG2651TAB-M0765 765 30.12 850
7 3 5 6 3 a 850 33.46 LFG2651TAB-M0850 850 33.46 1050
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
30755a
App
als
cat
* * M at
e ri
io n
li
W
170 mm
(6.69 in)
85 mm 12,7 mm
(3.35 in) (0.5 in)
(1.20 in)
30,5 mm
R. R.
31,75 mm
(1.25 in)
Features:
• Radius – width ratio min. 1,6
• For left or right L- or U-turns
• Can also be used in S-curves
22,5 mm
(0.89 in)
*
• Strong design
• Optimum product support
• Easy installation and maintenance
(0.59 in)
15 mm
(0.43 in)
11 mm
13 mm 6 mm
(0.51 in) (0.24 in)
Standard material
Without TAB With TAB 2 sides
LFG (GREY) TPR (WATER BLUE)
e
New design
ucti
Maint
on
Set collars, go to: ALL
30760a
3 0 9 9 0 a
App
als
5 4 6 3 0 a cat
M at
e ri
3 0 9 9 0 a io n
li
Features:
• Very high strength.
• Split versions: quick and easy replacement.
• Foolproof design.
• Completely closed structure, easy to clean
and to disinfect.
• Excellent wear and chemical resistance.
• Recyclable.
DIAMETER OF THE
ØP Ø OD Ø M S
Z mm SUPPORTING WHEEL
mm mm mm mm
10 102,8 107,7 84 45 85,0
13 132,7 138,8 114 60 116,1
15 152,7 159,4 135 70 136,7
16 162,8 169,6 145 75 146,9
30 mm
MACHINED DRIVE SPROCKETS - SPLIT
FIXED
S ++ 10
Ø 30 Ø 40
Z
ITEM DESCRIPTION
Ø OD
10 2351-10R30M-DMS 2351-10R40M-DMS
ØP
ØM
13 2351-13R30M-DMS 2351-13R40M-DMS
15 2351-15R30M-DMS 2351-15R40M-DMS
16 2351-16R30M-DMS 2351-16R40M-DMS
Material: polyamide (natural white), screws in stainless steel,
DF bushings in brass, DIN 6885 key seat.
Ø 30 Ø 40
Z
ITEM DESCRIPTION
See belts 2351-2551: 10 2351-10R30M-RMS 2351-10R40M-RMS
13 2351-13R30M-RMS 2351-13R40M-RMS
3 0 7 4 5 a 15 2351-15R30M-RMS 2351-15R40M-RMS
See belts 2651-2451: 16 2351-16R30M-RMS 2351-16R40M-RMS
3 0 7 5 0 a Material: polyamide (natural white), screws in stainless steel,
See belts 2351VG: bushings in brass.
3 0 7 5 5 a
Ø 30 mm
13 2351-13R23M-WMS 13 116,1
15 2351-15R23M-WMS 23 Max. allowed bore: Ø50 15 136,7
16 2351-16R23M-WMS 16 146,9
Revision 001
TRADITIONAL NEW
Ø 4 mm Ø 10 mm
Bolts in
stainless steel
Bushings in
brass
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
Wider teeth
T-snap lip
Self-retaining
bolts and nuts
The molded sprockets for our 2120-2250 series plastic modular belts have been improved. In comparison
to the previous sprocket design. The new sprockets offer following benefits: 2120 2250
LONGER LIFE
The sprocket teeth have been enlarged by 8% (2250 only) to better transfer the load from sprocket to belt.
This will also result in a longer wear life of sprocket and belt. Moreover, a new material is used, which is
more stable in all application conditions and offers increased impact resistance.
SIMPLER INSTALLATION
Bolts and nuts can be inserted in the proper seats with a small interference, designed to avoid losing Parts snap together
these parts during assembly/disassembly. There will be no more time lost due to bolts or nuts falling to the without fixing bolts
floor while installing a sprocket. The new and unique snap-fastening system is another feature that makes
sprocket assembly much easier. The T-shaped lip at the edge of the sprocket half, simply snaps into its
counterpart in the other half. When put around the shaft, the two halves will stick together even without
fixing the bolts and nuts.
T-snap lip
Note:
3 0 1 6 0 a 3 0 3 9 5 a The new sprockets are completely interchangeable with the previous design.
3 0 1 6 0 c 3 0 3 9 5 c Part numbers and item descriptions are unchanged.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3Modular
0 1belts0 a
&0sprockets
Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
For details and quotations for modular belts in materials not indicated in this catalog please contact
our customer service offices:
Via Guareschi, 2
24060 Telgate (Bergamo) - ITALY
Italy.PTSolutions@regalbeloit.com
Customer Service +39 035 83 51 301 - Fax +39 035 83 51 306
5 0 0 0 5 a INTRODUCTION TO CURVES
www.SystemPlastSmartGuide.com
REGAL OFFERS A COMPLETE RANGE OF CURVES AND STRAIGHT TRACKS, DESIGNED FOR ALL POSSIBLE CONVEYOR APPLICATIONS.
BELOW A BRIEF OVERVIEW OF THE VARIOUS CHARACTERISTICS.
Go to: 5 0 0 0 6 a
Secure chain retention: + +++ ++ positioned on the outside of the centre line radius
of each track which results in a more effective
Support in return part: - ++ + Magnet magnetic field through the curve.
Chain can be lifted for cleaning: ++ - +++
Jamming due to foreign particles: + - ++
0
0
50
20
Solid
00
/N
(R
PE
lubricant UHMWPE
SM
-P
-P
™
D
-S
n®
H
H
ro
ol
U
U
at
N
yl
NYLATRON is believed to be the trademark and/or trade name of Quadrant EPP USA Inc. and is not owned or controlled by Regal Beloit Corporation.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
Introduction to
curves. Go to:
PATENTED 5 0 0 0 5 a
c li c k f
or Index standard magnetic curves
vid e o 5 0 0 1 0 a and TOPTRAC®
Nolu-S™(R) material are a unique compound of UHMWPE and a solid lubricant. They
drastically reduce the coefficient of friction, maintaining the characteristics of UHMWPE.
Nolu-SR™ material have a better thermal conductivity compared with UHMWPE.
0
0
20
00
/N
)
E1
E1
(R
PE
SM
lubricant
• They extends the life of the chain.
-P
-P
S™
D
UHMWPE
G
W
W
H
n®
H
H
u-
ro
ol
U
U
at
N
yl
need replacing. Cost of strips is much lower than the cost of an entire curve
upperpart.
• Reduces the need of high value spare parts. Just a few strips are enough to be
well prepared for maintenance jobs.
Time
Traditional TopTrac®
curve curve
Clip-on profiles
• Replaceable Nolu-SR profiles.
• Reduced maintenance and installation time and costs.
• Independent maintenance for each track.
• Replacing the strips can be done with the curve still mounted in the conveyor.
This drastically reduces the required time for replacement. Maintenance
becomes quicker and easier.
Introduction to
Information about this product is only curves. Go to:
available on our Smart Guide® website.
5 0 0 0 6 a 5 0 0 0 5 a
5 0 1 0 1 a LBP93C TTM78.AC/KMD78.AC
LBP97C TTM82.AC/KMD82.AC
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
1 1 0 7 0 a
5 0 1 1 0 a
1 1 2 3 0 a
COMPACT CURVES AND STRAIGHT TRACKS FOR TAB & BEVEL CHAINS
PAGE
CHAIN TYPES: 878-879-880-881O-2250-2251/ WIDTH: TAB K325-330-450
TAB BEVEL
1 1 0 8 0 a 5 0 1 2 0 a
1 1 2 4 0 a
1 1 0 8 0 a 5 0 1 3 0 a
1 1 2 9 0 a 5 0 1 4 0 a
1 1 2 9 0 a 5 0 1 5 0 a
1 1 1 4 0 a
1 1 4 7 0 a 5 0 1 6 0 a
1 1 5 3 0 a 5 0 1 7 0 a
1 1 5 4 0 a 5 0 1 7 0 a
1 1 5 4 0 a 5 0 1 8 0 a
Revision 001
Pitch 85
44 L
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
13,5
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
27
90 (82)**
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
63 (55)**
10
5 0 0 2 0 a
23 6
MAGNETIC CURVES FOR CHAINS 879M-880M-881M / K325-K330
35
8
www.SystemPlastSmartGuide.com RADIUS 500-590-680-750-860-1000 / BASIC WIDTH: 100
25
R
Maint 10
e Const
nanc M8
For general index, go to:
r
5 0 0 1 0 a
e
75
ucti
on
ALL
50020a
App
c li c k f
als
TL cat
M at
e ri
io n
li
or A
vid e o
Pitch 85 L
For44
stainless steel L Introduction to
magnetic chains,type: curves. Go to:
R
881 M - 881 MO A 5 0 0 0 5 a
Go to:
85
1 1 0 6 0 a = R+
R1
90
10
°
Replacement
23 6
5 0 5 6 5 a
L
35
25
M8
chains, type: - Replaceable wearstrips
879 M - 880 M 75 - Lowest coefficent of friction
K 13 Go to:
4 5 0 0 0 6 a
1 1 2 2 0 a
A TL TL
L
134 Pitch 85 Pitch 85
44 L 44 (K5B- Pitch 180)
R
A
For straight curve
13,5
13,5
go to: R+8
5
27
27
=
R1
5 0 1 4 0 a
90 (82)**
90 (82)**
90
63 (55)**
63 (55)**
°
10
23 6
23 6
6
6
L
35
8
TL
25
35
For type curve: K5B R R
10
M8
**Dimensions (...) are for 1 - Track version series K5A-K5C-K5D-K7-K8 and 2 Track version K5B. 75
TOPTRAC® STANDARD
TRACKS TYPE ITEM DESCRIPTION ITEM DESCRIPTION
TL R L 30° 45° A 90° 30° 45° A 90°
NR. CURVE
PLATE: K325/K330-WIDTH: 82,5/83,8 mm L
PLATE: K325/K330-WIDTH: 82,5/83,8 mm
L
1 100 TTM03-30-01A TTM03-45-01A TTM03-90-01A KMD03-30-01A KMD03-45-01A KMD03-90-01A
R
A
TTM03-30-02A TTM03-45-02A TTM03-90-02A KMD03-30-02A KMD03-45-02A KMD03-90-02A
+85
2 185
R
A
3 270 TTM03-30-03A TTM03-45-03A TTM03-90-03A KMD03-30-03A 1 =R
KMD03-45-03A KMD03-90-03A
R
+85
=R
90
K7 500 0 R
5 440 TTM03-30-05A TTM03-45-05A TTM03-90-05A KMD03-30-05A KMD03-45-05A KMD03-90-05A
90
TL
7 610 TTM03-30-07A TTM03-45-07A TTM03-90-07A KMD03-30-07A KMD03-45-07A KMD03-90-07A
L
1 100 K5C 860 125 TTM09-30-01C TTM09-45-01C TTM09-90-01C KMD09-30-01C KMD09-45-01C KMD09-90-01C
1 100 K5D 1000 0 TTM10-30-01A TTM10-45-01A TTM10-90-01A KMD10-30-01A KMD10-45-01A KMD10-90-01A
• More tracks and different angles available on request.
TL
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 1 0 a Pitch785
5 5Levelers 2 0 1 manual
Engineering 0 a
5Bearing 441 0 a
6 0supports L
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a
13,5
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
27
5 0 0 3 0 a MAGNETIC CURVES FOR CHAINS 879M-880M-881M / K325-K330
90
10
23 6
www.SystemPlastSmartGuide.com RADIUS 500-750-1000 / BASIC WIDTH: 111
6
63
35
8
e Co
nanc nstr
25
For general index, go to:
ucti
R
Maint
5 0 0 1 0 a
on
ALLM8
10
50030a
App
c li c k f
als
75 c a
M at
e ri
tio n
li
or
vid e o
TL
A Introduction to
Pitch 85 curves. Go to:
L
44 L 5 0 0 0 5 a
For stainless steel
R
magnetic chains,type: A
881 M - 881 MO
Go to: +85
=R
1 1 0 6 0 a R1 Replacement
5 0 5 6 5 a
90
10
°
23 6
L
35
25
TL - Replaceable wearstrips
R - Lowest coefficent of friction
10
A
13,5
13,5
+85
For type curve:
27
27
=R
R1 - K43
K4 - K42
90
90
90
°
10
23 6
23 6
6
6
63
63
L
35
8
35
8
TL
25
R R
10
M8
75
A
L A
L
R
A
+85 ®
R
A
1 =R
TOPTRAC STANDARD
R
ITEM DESCRIPTION ITEM DESCRIPTION+85
TRACKS TYPE 1=R
90
TL R L R
°
TL
2 196 TTM05-30-02B TTM05-45-02B TTM05-90-02B KMD05-30-02B KMD05-45-02B KMD05-90-02B
3 281 TTM05-30-03B TTM05-45-03B TTM05-90-03B KMD05-30-03B KMD05-45-03B KMD05-90-03B
TL
4 366 TTM05-30-04B TTM05-45-04B TTM05-90-04B KMD05-30-04B KMD05-45-04B KMD05-90-04B
K4 500 100
5 451 TTM05-30-05B TTM05-45-05B TTM05-90-05B KMD05-30-05B KMD05-45-05B KMD05-90-05B
6 536 TTM05-30-06B TTM05-45-06B TTM05-90-06B KMD05-30-06B KMD05-45-06B KMD05-90-06B
7 621 TTM05-30-07B TTM05-45-07B TTM05-90-07B KMD05-30-07B KMD05-45-07B KMD05-90-07B
8 706 TTM05-30-08B TTM05-45-08B TTM05-90-08B KMD05-30-08B KMD05-45-08B KMD05-90-08B
1 111 TTM11-30-01B TTM11-45-01B TTM11-90-01B KMD11-30-01B KMD11-45-01B KMD11-90-01B
2 196 K42 750 100 TTM11-30-02B TTM11-45-02B TTM11-90-02B KMD11-30-02B KMD11-45-02B KMD11-90-02B
3 281 TTM11-30-03B TTM11-45-03B TTM11-90-03B KMD11-30-03B KMD11-45-03B KMD11-90-03B
Revision 001
1 111 K43 1000 100 TTM12-30-01B TTM12-45-01B TTM12-90-01B KMD12-30-01B KMD12-45-01B KMD12-90-01B
• More tracks and different angles available on request.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
TL TL
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
Pitch Pitch
44 44 L
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
13,5
13,5
27
27
5 0 0 4 0 a MAGNETIC CURVES FOR CHAINS 879M-880M-881M/K450
90
90
10
23 6
23 6
63
63
RADIUS 500-610
8 6
8 6
www.SystemPlastSmartGuide.com
35
25
For general index, go to:
nce Constr
c li c k f
R R na
M8
10
TL 5 0 0 1 0 a TL
ucti
Maint
or 75
on
Pitch Pitch vid e o ALL
50040a
44 44 L
App
als
cat
13,5
M at
e ri
io n
li
27
A
90
10 L
For stainless steel
23 6
23 6
63
Introduction to
8 6
R
magnetic chains,type: A 0
+12 curves. Go to:
35
1=R
25
881 M - 881 MO K450 R
Go to: R 5 0 0 0 5 a
90
M8
10
°
1 1 0 6 0 a 75
L
For type curve:
K27-K21A-K22A TL
Replacement
TL TL TL TL
A
5 0 5 6 5 a
Pitch Pitch Pitch Pit
44 L 44 L 44 44
TL
13,5
13,5
13,5
13,5
R
A
27
63 13,527
27
For plastic magnetic 0
+12
chains, type: =R 44 - Replaceable wearstrips
R1
90
63 (55)** 27 90
90
879 M - 880 M K450 - Lowest coefficent of friction
90
10
°
K1
23 6
23 6
23 6
5 0 0 0 6 a
63
63
Go to:
8 6
8 6
8 6
8 6
34
L
90 (82)**
1 1 2 2 0 a
35
TL
25
R R R R
M8
10
8 6
75
TOPTRAC® R STANDARD
134 TL
ITEM DESCRIPTION ITEM DESCRIPTION
TRACKS TYPE
13,5
L TL L
1 129 0 TTM23-30-01A TTM23-45-01A TTM23-90-01A KMD23-30-01A KMD23-45-01A KMD23-90-01A
K27 610 117
R
R
2 246 0 - A 0 - - KMD23-30-02A KMD23-45-02A KMD23-90-02A A 0
13,5
+ 12 44 L +12
1=R R1
=R
8 6
1 129 K21A 500 125 120 TTM21-30-01CR TTM21-45-01C TTM21-90-01C KMD21-30-01C KMD21-45-01C KMD21-90-01C
90
90
R
°
°
63 (55)** 27
90 (82)**
1 129 K22A 610 125 120 TTM22-30-01C TTM22-45-01C TTM22-90-01C KMD22-30-01C KMD22-45-01C KMD22-90-01C
L
L
• More tracks and different angles available on request. TL
10
8 6
35
TL R
25
TL RADIUS 610-750-860-1000 M8
13,5
10
44 L
75
13,5
44
63 (55)** 27
90 (82)**
A
63 (55)** 27
90 (82)**
6
10 +19
For stainless steel =R
R1
8 6
magnetic chains,type: L
35
R
25
8 6
90
°
1 1 0 6 0 a 75
L
A TL
6
+19 TL TL
=R
R1
13,5
13,5
L 44 L 44
R
A
For plastic magnetic For type curve:
90
63 (55)** 27
63 (55)** 27
90 (82)**
90 (82)**
°
10
K1 Go to: TL
8 6
34
8 6
1 1 2 2 0 a
35
R R
25
75
134 TOPTRAC ®
STANDARD
TRACKS TYPE ITEM DESCRIPTION A ITEM DESCRIPTION
TL
TL R L 30° 45° 90° 30° 45° 90°
NR. CURVE +19
6
13,5
1 =R 44
PLATE: K750-WIDTH: 190,5 mm R PLATE: K750-WIDTH: 190,5 mm
L
1 214 K61 610 125 TTM31-30-01C TTM31-45-01C TTM31-90-01C KMD31-30-01C KMD31-45-01C KMD31-90-01C
R
63 (55)** 27
A
90 (82)**
90
TL R
1 214 K65** 1000 0 TTM33-30-01A TTM33-45-01A TTM33-90-01A KMD33-30-01A KMD33-45-01A KMD33-90-01A
• More tracks and different angles available on request.
Pitch
44 L
1 1 0 1 0 a 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
13,5
Chains & sprockets
27
accessories
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
82 (90)**
55 (63)**
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a 10
6
5 0 0 5 0 a MAGNETIC CURVES FOR CHAINS 879M/880M/881M-K325-330
35
8
25
www.SystemPlastSmartGuide.com R RADIUS 500-750 / OTHER VERSIONS
10
M8
For general index, go to: ance Constr
n75
5 0 0 1 0 a
ucti
Maint
on
ALL
c li c k f
50050a
TL
App
als
or cat
M at
e ri
io n
li
vid e o A
Pitch
44 L L
Introduction to
For stainless steel curves. Go to:
R
magnetic chains,type: A
5 0 0 0 5 a
881 M - 881 MO, go to:
Pi tch
1 1 0 6 0 a R1=R+
10
90
°
Replacement
35
5 0 5 6 5 a
25
L
R
TL
10
M8
For plastic magnetic
chains, type: 75
- Replaceable wearstrips
879 M - 880 M, go to:
- Lowest coefficent of friction
K1 1 1 2 2 0 a
34 5 0 0 0 6 a
A TL TL
134 Pitch
L
Pitch
44 44
R
h
5+Pi0tc 1 4 0 a
27
27
R
R1=
82 (90)**
82 (90)**
0°
3555 (63)**
55 (63)**
10
6
6
L
8
8
R
°
TL
K2 500 100 90
4 370 - - - KMD02-30-04B KMD02-45-04B KMD02-90-04B
TL
5 460 - - - KMD02-30-05B KMD02-45-05B KMD02-90-05B
6 550 - - - KMD02-30-06B KMD02-45-06B KMD02-90-06B
1 110 TTM61-30-01B TTM61-45-01B TTM61-90-01B KMD61-30-01B KMD61-45-01B KMD61-90-01B
2 195 TTM61-30-02B TTM61-45-02B TTM61-90-02B KMD61-30-02B KMD61-45-02B KMD61-90-02B
3 280 TTM61-30-03B TTM61-45-03B TTM61-90-03B KMD61-30-03B KMD61-45-03B KMD61-90-03B
4 365 TTM61-30-04B TTM61-45-04B TTM61-90-04B KMD61-30-04B KMD61-45-04B KMD61-90-04B
K10** 500 100 85
5 450 TTM61-30-05B TTM61-45-05B TTM61-90-05B KMD61-30-05B KMD61-45-05B KMD61-90-05B
6 535 TTM61-30-06B TTM61-45-06B TTM61-90-06B KMD61-30-06B KMD61-45-06B KMD61-90-06B
7 620 TTM61-30-07B TTM61-45-07B TTM61-90-07B KMD61-30-07B KMD61-45-07B KMD61-90-07B
8 705 TTM61-30-08B TTM61-45-08B TTM61-90-08B KMD61-30-08B KMD61-45-08B KMD61-90-08B
1 110 TTM04-30-01A TTM04-45-01A TTM04-90-01A KMD04-30-01A KMD04-45-01A KMD04-90-01A
K3 500 0 90
Revision 001
17
32
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
95 (87)**
5Curves
0 0& tracks
0 5 a 5 1guide5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
63 (55)**
Side
23 6
5 0 0 6 0 a
6
MAGNETIC CURVES FOR CHAINS 882M-8857M/K750-K1000-K1200
23 6
8
R
www.SystemPlastSmartGuide.com RADIUS 500-750-1000 / OTHER VERSIONS
e Co
For general index, go to: nanc nstr
TL
ucti
Maint
c li c k f
5 0 0 1 0 a
on
ALL
50060a
or Pitch A
App
als
vid e o cat
M at
e ri
60 io n
li
L
Pitch
17
L
32
Introduction to
R
For stainless steel A
Pitch curves. Go to:
95 (87)**
8857M
90
10
°
Go to:
23 6
6
1 1 1 1 0 a
L
8
25
R Replacement
8857M VG TL
23 6
5 0 5 6 5 a
10
Go to: M8
75
1 1 1 6 0 a
TL - Replaceable wearstrips
L
- Lowest coefficent of friction
Pitch 5 0 0 0 6 a
For plastic magnetic 60
chains, type:
17
32
882M
10
K1 Go to:
34
95 (87)**
1 1 2 8 0 a
35
63 (55)**
25
882 M VG
23 6
6
Go to:
10
M8
134 1 1 4 0 0 a 75
8
TL
Pitch
A
For type curve: 60
K86-K93-K97
17
32
L
95 (87)**
A tch
+Pi
63 (55)**
=R
R1
90
23 6
6
°
8
10
1 200 TTM42-30-01B TTM42-45-01B TTM42-90-01B KMD42-30-01B KMD42-45-01B KMD42-90-01B
95 (87)**
25
10
L
82
1 1 0 1 0 a 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a 10
22
55
Chains & sprockets
40
accessories
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
35
25
5
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5REquipment
7 0 1 0 a M8
10
75
c li c k f
For general index, go to:
TL
e
A
ucti
Maint
5 0 0 1 0 a or
on
44 vid e o ALL
50070a
App
als
13,5
cat
M at
e ri
io n
li
27
R
A
82
10
22
Introduction to
55
40
TL curves. Go to:
90
35
60
25
5 0 0 0 5 a
°
K 134
For plastic magnetic
5
chains, type:R TL
17
M8
10
32
LBP 879 M K 134 75
Go to:
95
TL TL Replacement
1 1 3 5 0 a
63
44 44 5 0 5 6 5 a
8 22
R
13,5
13,5
27
27
A
82
82
10
- Replaceable
10
wearstrips
22
22
55
55
- Lowest coefficent of friction
40
40
35
25
25
TL
5 0 1 4 0 aA
5
5
R
R R 60
M8 M8
10
10
TL 75 75
17
60
32
TOPTRAC® STANDARD
90
°
TRACKS 10
TL R
CURVE TL
63
35
PLATE: K325/K330-WIDTH: 82,5/83,8 mm PLATE: K325/K330-WIDTH: 82,5/83,8 mm
25
R
1 100 LBP68C 500 TTM68-30-01A TTM68-45-01A
A TTM68-90-01A KMD68-30-01AA KMD68-45-01A KMD68-90-01A
10
M8
R 75
A A
TL
TL 60
TL
60
90
90
A
17
60
°
32
chains, type:
882M
63
A
8 22
Go to: 10
R
1 1 3 6R 0 a
35
90
25
R
°
10
M8 TL
75
TL TL
For type curve: 60 60
TL
LBP86C-LBP93C 60
17
17
LBP97C
32
32
A
95
95
10
63
63
10
8 22
35 8 22
35
R
25
R
A
25
R
10
M8
75
10
M8 TOPTRAC® STANDARD
75
TRACKS TYPE ITEM DESCRIPTION ITEM DESCRIPTION
TL R 30° 45° 90° 30° 45° 90°
NR.
TL CURVE
PLATE: K750-WIDTH: 190,5 mm PLATE: K750-WIDTH: 190,5
TL mm
60
1 214 LBP86C 860 TTM71-30-01AC TTM71-45-01AC TTM71-90-01AC KMD71-30-01AC KMD71-45-01AC KMD71-90-01AC
17
PLATE: K1000-WIDTH:
A 254 mm PLATE: K1000-WIDTH: 254 mm
32
35
A R
• More tracks and different angles available on request.
7
90
°
5
90 (82)**
63 (55)**
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a 10
5Bearing
6 0supports
1 0 a
11
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a
23
35
25
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
7
M8
10
R
5 0 0 8 0 a MAGNETIC CURVES FOR CHAINBELT SERIES 2120M / K330 75
www.SystemPlastSmartGuide.com RADIUS 500-750-1000 / BASIC WIDTHS: 100 AND 111
e Co
For general index, go to: nanc nstr
ucti
Maint
5 0 0 1 0 a
on
ALL
50080a
App
als
TL cat
M at
e ri
io n
li
Pitch 85 L
80,5 100
Introduction to
A curves. Go to:
R
+85 5 0 0 0 5 a
=R
For sideflexing R1
belts, type:
90
2120 M
°
10
Go to:
3 0 7 2 0 a
L
23
35
25
TL
M8
10
R
75
TL
Pitch 85
80,5 100
A
27
5,2
90 (82)**
63 (55)**
A 10
+85
11
=R
R1
23
35
25
7
R 10 M8
75
L
TL
A
L
**Dimensions (…) are valid for the 1 Track version of curve type KA7.
TRACKS TYPE 30° A 45° 90°
TL R L
R
90 (82)**
Side guide brackets &
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a 5 3 5 1 0 a
accessories
63 (55)**
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a 10
23 10
10
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
35
25
5 0 0 9 1 a MAGNETIC CURVES CHAINBELT 2260M / K330
8
R M8
10
www.SystemPlastSmartGuide.com RADIUS 500-750-1000 75
e Co
For general index, go to: nanc nstr
ucti
Maint
5 0 0 1 0 a
c li c k f
on
ALL
50091a
TL
A
App
or
als
vid e o cat
M at
e ri
io n
li
Pitch 85 L
44 L
R
A Introduction to
curves. Go to:
+85 5 0 0 0 5 a
=R
For sideflexing R1
chainbelts, type:
90
°
2260M 10
23 10
K1 Go to:
34
3 0 7 0 0 a Replacement
L
35
5 0 5 6 5 a
25
TL
M8
10
134 75
- Replaceable wearstrips
- Lowest coefficent of friction
For straight curve
go to: 5 0 0 0 6 a
TL TL
5 0 1 4 0Aa
Pitch 85 Pitch 85
44 L 44
R
13,5
13,5
A
27
27
+85
90 (82)**
=R
R1 For type curve:
63 (55)**
90
0°
KB4 10
23 10
63
23 10
8 35 10
10
L
35
25
TL
8
R R M8
10
75
**Dimensions (...) are for 1 - Track version serie KB7.
TOPTRAC® STANDARD
TRACKS TYPE ITEM DESCRIPTION ITEM DESCRIPTIONA
TL R L 30° 45° A 90° 30° 45° 90°
NR. CURVE
L
L PLATE: K330-WIDTH: 83,8 mm P=85 PLATE: K330-WIDTH: 83,8 mm P=85
R
A TTM90-45-03A R1
3 270 TTM90-30-03A TTM90-90-03A KMD90-30-03A KMD90-45-03A KMD90-90-03A
90
KB7** 500 0 85
°
13
27
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
90 (82)**
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
63 (55)**
10
5Curves
0 0& tracks
0 5 a 5 1guide5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
15
Side
15
25
5 0 1 0 1 a
35
25
MAGNETIC CURVES FOR CHAINBELT 2251M / K330-450
5
R
www.SystemPlastSmartGuide.com RADIUS 500-610-750-1000 / BASIC WIDTH: 100 ,111 AND 129 M8
10
75
e Co
For general index, go to: nanc nstr
ucti
Maint
5 0 0 1 0 a
c li c k f
on
ALL
50101a
TL or A
App
als
vid e o cat
M at
e ri
io n
li
Pitch P L
44 100
Introduction to
R
A curves. Go to:
+85 5 0 0 0 5 a
For sideflexing =R
chainbelts, type: R1
90
2251 M
°
10
K1
15
Go to:
34 Replacement
3 0 7 0 0 a
L
25
35
5 0 5 6 5 a
25
TL
R
M8
10
134
75
- Replaceable wearstrips
- Lowest coefficent of friction
For straight curve
go to: TL 5 0 0 0 6 a
A TL
5 0 1 4 0 a Pitch P
100 Pitch P
13,5
44 13,5
44
27
R
A
27
90 (82)**
+85
=R
90 (82)**
R1
63 (55)**
10
63 (55)**
90
15
15
KC4
15
25
35
25
25
L
35
5
R
TL M8
10
5
R
**Dimensions (…) are valid for the 1 Track version of curve type KC7. 75
TOPTRAC® STANDARD 7
TRACKS TYPE ITEM DESCRIPTION ITEM DESCRIPTION
TL R L PITCH
30° 45°
A 90° 30° 45°A 90°
NR. CURVE
L PLATE: K330-WIDTH: 83,8 mm PLATE: K330-WIDTH: 83,8 mm
1 100 TTM84-30-01A TTM84-45-01A TTM84-90-01A KMD84-30-01A KMD84-45-01A KMD84-90-01A
2 185 TTM84-30-02A TTM84-45-02A TTM84-90-02A KMD84-30-02A AKMD84-45-02A KMD84-90-02A
R
A +85
R
5 440 R1
TTM84-30-05A TTM84-45-05A TTM84-90-05A KMD84-30-05A KMD84-45-05A KMD84-90-05A
°
90
9,5
e Co
For general index, go to: nanc nstr
ucti
Maint
5 0 0 1 0 b
on
ALL
50110a
App
als
cat
TL M at
e ri
io n
25li
CURVE TRACKS
18
Introduction to
For steel chains, type: 45 curves. Go to:
881R TAB - 881O TAB
70 5 0 0 0 5 a
Go to:
1 1 0 7 0 a
Pitch
9,5
A
50
R
TL A
For plastic chains, type: tch
877 TAB • 878 TAB +Pi
879 TAB • 880 TAB 25 R1=R
90
18
°
Go to:
45
50
1 1 2 3 0 a
70 TL
2250 TAB• 2251 TAB
Go to:
3 0 7 1 0 a
A
50 R 500 R 610 R 650 R 800
REFERENCE PITCH TRACKS TL
ITEM DESCRIPTION
R
A
1 100 ch
VT880T325R500T1D VT880T325R610T1D VT880T325R650T1D VT880T325R800T1D
880TAB-K325 Pit
880TAB-K330 2 1851=R+ VT880T325R500T2D - - -
2250 TAB K330 85
R
90
3 270 VT880T325R500T3D - - -
°
STRAIGHT TRACKS
00
20
9,5
25
18
45
67
TL
Supply: 1 piece.
Material: UHMWPE; color: black.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
9,5
www.SystemPlastSmartGuide.com CHAIN TYPES 877/878/879/880/881O-TAB K325-330-450-750
CHAINBELT TYPES 2250/2251 TAB K330-K450
e Co
nanc nstr
55
For general index, go to:
ucti
Maint
18
5 0 0 1 0 b
on
ALL
50120a
CURVE
45 TRACKS
App
als
70 cat
M at
e ri
io n
li
9,5
Introduction to
A curves. Go to:
55
881R TAB - 881O TAB
R
18
Go to: A
45
1 1 0 7 0 a
70
90
°
50
TL
Compact curve tracks A
50
For plastic chains, type: REFERENCE TL ITEM DESCRIPTION RADIUS R
R
Go to: 880TAB-K450
TL 130 VTC880T450R610T1D 610
2251TAB-K450
3 0 7 1 0 a
Supply: 1 piece.
Material: UHMWPE; color: black.
STRAIGHT TRACKS
00
41,5
A
50
55
A
881O
19
Go to:
1 1 0 8 0 a
90
15
A
50
TL
A
50 REFERENCE TRACKS TL ITEM DESCRIPTION RADIUS R
R
50
TL
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
6
25
ucti
Maint
5 0 0 1 0 b
on
TL ALL
50130a
App
als
cat
M at
e ri
io n
li
CURVE TRACKS
15
Introduction to
TL curves. Go to:
For Stainless steel 5 0 0 0 5 a
bevel chains, type: 41,5
881R - 881O
A
Go to:
6
50
25
1 1 0 8 0 a
R
TL A
90
°
50
15
880-K325 1 100
A VT880B325R500T1D VT880B325R610T1D
STRAIGHT TRACKS
00
20
A
6
25
B
15
41,5
TL
Information about
this product is only available on our
Smart Guide® website.
A B
CARRY/RETURN STRAIGHT TRACK SECTIONS RETURN TRACK SECTIONS
6
25
e Co
For general index, go to: nanc nstr
e
TL
ucti
Maint
5 0 0 1 0 b
on
ALL
50140a
App
als
cat
M at
e ri
io n
li
CURVE TRACKS
15
TL Introduction to
curves. Go to:
15
For plastic chains, type: 5 0 0 0 5 a
882 TAB A
Go to:
50
1 1 2 9 0 a
R
TL A
90
30
°
24
50
58
TL
90
TL
R R R R
REFERENCE WIDTH
610 650 800 1000
mm
882TAB-K450 130 VT882T450R610T1D A VT882T450R650T1D VT882T450R800T1D -
882TAB-K750 200
50 VT882T750R610T1D VT882T750R650T1D VT882T750R800T1D VT882T750R1000T1D
R
50
STRAIGHT TRACKS
TL
00
20
84
Supply: 1 piece.
TL
Material: UHMWPE; color: black.
STRAIGHT TRACKS
CHAIN TYPES 879M/880M/881M-K325-330/2250M/2251M/2260M-K330
Suitable with
magnetic curves:
879M-880M-881M
5 0 0 2 0 a
5 0 0 3 0 a
Straight track sections 879M-880M-881M
00
5 0 0 5 0 a
20
13,5
TL
2251M
5 0 1 0 1 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 1 4 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
1 1 0 6 0 a
Magnetic curves,
go to:
5 0 0 1 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
30
8
www.SystemPlastSmartGuide.com CHAIN TYPES 882K450-750-1200
TL
e Co
For general index, go to: 58 nanc nstr
ucti
Maint
5 0 0 1 0 b
on
ALL
50150a
App
als
cat
M at
e ri
io n
li
CURVE TRACKS
15
A Introduction to
curves. Go to:
30
8
882
K 134Go to: 50
TL
1 1 2 9 0 a
R
58 A
134
90
°
50
15
A TL
A
50
TL R R R R
REFERENCE
WIDTH 610 650 800 1000
R
A
K450 130 VT882B450R610T1D VT882B450R650T1D VT882B450R800T1D VT882B450R1000T1D
K750 200 VT882B750R610T1D VT882B750R650T1D VT882B750R800T1D VT882B750R1000T1D
90
°
STRAIGHT TRACKS
00
20
A
22
30
B
15
58
A
A B
Carry/Return straight track sections Return track sections
35
29
e Co
For general index, go to: nanc nstr
ucti
TL
Maint
5 0 0 1 0 b
on
ALL
50160a
App
als
cat
M at
35
e ri
io n
li
CURVE TRACKS
35
19
70 Introduction to
curves. Go to:
For plastic chains, type:
1873 5 0 0 0 5 a
Go to: A
35
29
1 1 4 7 0 a 50
TL
R
A
35
90
°
35
50
For steel chains, type:
19
1874 70 TL
Go to:
1 1 1 4 0 a
A
TL 50
R1 R1 R1 R1 R1
TAB CHAINS WIDTH
380 500 610 800 1000
R
mm A
1863-1873
75 VT1873T225R380T1D VT1873T225R500T1D VT1873T225R610T1D VT1873T225R800T1D VT1873T225R1000T1D
1874TAB-K225
90
°
1873
50
STRAIGHT TRACKS
70 Supply: 1 piece.
Revision 001
ucti
Maint
5 0 0 1 0 b
on
ALL
50170a
App
57
als
12
cat
M at
e ri
io n
li
21
21
12
Introduction to
For plastic chains, type: curves. Go to:
1701 TAB 5 0 0 0 5 a
30
30
Go to: 75 57
1 1 5 3 0 a 100 75
100
Supply: 1 piece.
A Material: UHMWPE; color: black.
50
CHAIN TYPE ITEM DESCRIPTION
R
A
1701TAB VT1701T-L2000T1
90
°
APPLICATION
50
100
58
14,5
1710-CTAB
Go to:
1 1 5 4 0 a
9,5
9,5
75 58
TL 75
TL
A
APPLICATION
50
R
A
90
°
50
TL
Supply: 1 piece.
Curves for multiflex TAB chains - Type H Carry/Return track sections Material: UHMWPE; color: black.
PLATE PLATE
CHAIN TYPE TL R ITEM DESCRIPTION CHAIN TYPE TL ITEM DESCRIPTION
WIDTH WIDTH
Revision 001
e Co
For general index, go to: nanc nstr
ucti
Maint
5 0 0 1 0 b
on
ALL
50180a
CURVE TRACKS
App
als
cat
M at
e ri
io n
li
58
Introduction to
9
curves. Go to:
For plastic chains, type:
5 0 0 0 5 a
5 10
30
1713-CTAB
Go to:
1 1 5 4 0 a
6
75
TL
A APPLICATION
50
R
A
90
°
50
TL
STRAIGHT TRACKS
00
20
9
30
510
6
58
75
TL
WEAR STRIPS
5 0 5 2 0 a 5 0 5 3 0 a 5 0 5 5 0 a 5 0 5 6 0 a
5 0 5 8 0 a 5 0 6 0 0 a 5 0 6 0 0 a
5 0 5 7 0 a 5 0 6 5 0 a
DRIVE RIVET FOR WEAR STRIPS GUIDES FOR SIDEFLEXING BELT TOPTRAC® CURVE PROFILES
Revision 001
5 0 5 5 0 b 5 0 5 7 0 a 5 0 5 6 5 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 5 2 0 a WEAR STRIPS
www.SystemPlastSmartGuide.com
MATERIAL: e Co
Extruded ultra high molecular weight polyethylene. nanc nstr
ucti
Maint
Max. continuous service temperature in air 90° C.
on
ALL
50520a
App
als
cat
M at
e ri
See other wear strips: io n
li
Min. order quantity: 180 m
5 0 5 3 0 a
20
VG-L20M-G-200 VG-L20M-B-200 VG-L20M-NS-200 60 m - 60 m
3
2
5,5
2
20
3
7
4
3
23
3
5,8
- - VG-Z21M-NS-150 45 m - 45 m
3
6
6
24
3
8
- - VG-Z22M-NS-100 30 m - 30 m
3
8
3
25
5,5
7
4
5,5
25,5
5
9
- - VG-Z22WM-NS-150 45 m - 45 m
3
9
5
27
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 5 2 0 b WEAR STRIPS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
50520b
App
als
cat
M at
e ri
io n
li
MATERIAL:
Extruded ultra high molecular weight polyethylene.
Max. continuous service temperature in air 90° C.
Water absorption coefficient = 0.
See other wear strips:
5 0 5 3 0 a
Min. order quantity: 180 m
2,8
1,5
3
10
- - VG-JL23M-NS-150 45 m - 45 m
3,2
12
27
2,8 2
5
3
10
1,5
11
3,5
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 5 3 0 a WEAR STRIPS
www.SystemPlastSmartGuide.com
e Co
MATERIAL: nanc nstr
ucti
Maint
Extruded ultra high molecular weight polyethylene.
on
ALL
50530a
App
als
Max. continuous service temperature in air 90° C. cat
M at
e ri
io n
li
Water absorption coefficient = 0.
3,2
- - VG-P18CC-100 30 m - 30 m
1,3
19
- - VG-JS3-075-125-100 30 m - 30 m
4,8
11
25
3
*
9,5
3,2
- - VG-JS100-125-100 30 m - 30 m
1,3
3
19
25
3
*
10,5
- - VG-J100-125T-100 30 m - 30 m
3,8
1,3
38
3
* - VG-JS150-125-W-100 VG-JS150-125-100 30 m - 30 m
9,5
3,2
1,3
3
19
51
3
* - - VG-JS200-125-20 - 6m 60 m
9,5
3,2
1,3
3
19
22
3
19
3
1,3
3
19
23
3
13
- - VG-JEL-078-125-20 - 6m 60 m
3
4,3
11
2,5
Revision 001
5 0 5 3 0 b WEAR STRIPS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
50530b
App
als
cat
M at
e ri
io n
li
See other wear strips:
MATERIAL: 5 0 5 2 0 a
Extruded ultra high molecular weight
polyethylene.
Max. continuous service temperature in UHMWPE
air 90° C. WHITE
Water absorption coefficient = 0.
ITEM DESCRIPTION
25
5
11,5
* VG-JS100-188-100 30 m - 30 m
3,2
1,3
3
19
25
5
* VG-J100-188-100 30 m - 30 m
12
4,8
1,3
38
5
*
11,5
VG-JS150-188-20 - 6m 60 m
3,2
1,3
3
19
51
5
*
11,5
VG-JS200-188-20 - 6m 60 m
3,2
1,3
3
19
22
3
19
* VG-JSL075-188-100 30 m - 30 m
11,5
3,2
5
1,3
3
19
5 0 5 5 0 a WEAR STRIPS
www.SystemPlastSmartGuide.com
MATERIAL: e Co
nanc nstr
Extruded ultra high molecular weight polyethylene.
ucti
Maint
on
Max. continuous service temperature in air 90° C. ALL
50550a
App
als
cat
M at
e ri
io n
li
Min. order quantity: 180m.
-
3
7
- VG-U3042M-NS-20 6 m - 30 m
31
42
VG-U3042M-G-200
4
12
9
3 - 60 m 60 m
VG-U3043RM-G-200 VG-U3043RM-B-200 VG-U3043RM-NS-200
31
43
50 88 50
30
45
R3
ITEM
1,5
15,5
5 DESCRIPTION
R1, See other wear strips:
6,5 4
R3
VG-S4-S3020M-20 6m 30m
20
5 0 5 5 0 b
10
- - VG-U3641M-NS-200 - 60 m 60 m
36
41
3
41
45 - - VG-U4045M-NS-150 - 45 m 45 m
4
5,5
40
4
3
12
9
45
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
50550b
MATERIAL:
App
als
cat
Extruded ultra high molecular weight polyethylene. M at
e ri
io n
li
Max. continuous service temperature in air 90° C.
Water absorption coefficient = 0.
See other wear strips:
Min. order quantity: 180m.
5 0 5 5 0 a
3,7
34
35
27,5
0,4
4,2
10
6,5
15
R
3
2,1
- VG-T2810M-B-10 - - - 3m -
4,1
NOSE BAR
3 0 1 7 5 a
Countersink L
UHMWPE
H
6,5
82˚
11
STEEL
ITEM DESCRIPTION
Revision 001
MIN. MAX
VG-750-10 19 3 5 12,5 PA-POM 100
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 5 6 0 a WEAR STRIPS
www.SystemPlastSmartGuide.com e Co
nanc nstr
ucti
Maint
UHMWPE UHMWPE NOLU-S™
on
ALL
50560a
App
als
cat
M at
e ri
Min. order quantity: 180m. io n
li
ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION
40
3,25
30,5 VG-P330M-G-10 VG-P330M-B-10 VG-P330M-NS-10 3m 30 m
3,3
10
A B C
VG-P640M-G-10 VG-P640M-B-10 VG-P640M-NS-10 3m 30 m
6.5 12 30
VG-P640M-G-20 VG-P640M-B-20 VG-P640M-NS-20 6m 30 m
50
2,8
41
VG-P840M-G-10 VG-P840M-B-10 VG-P840M-NS-10 3m 30 m
8.5 14 27.5
B
60
2,75
6,5
90
81 VG-P680M-B-10 3m 30 m
4
- -
61,5
14
VG-P680M-B-20 6m 30 m
MATERIAL:
APPLICATION: the profile can be used on several conveyors as a chain and belt support in
- Metal profile in stainless steel
combination with standard UHMWPE guides or wear strip.
AISI 304.
- Wear strip in UHMWPE.
SUPPLY:
- 3 or 6 meters. A B
1,5 VG-S1040M-10 3m 30 m
10 10
VG-S1040M-20 6m 30 m
10.5 16 35
VG-SP1040M-G-20 VG-SP1040M-B-20 VG-SP1040M-NS-20 6m 30 m
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
50565a
App
als
cat
M at
e ri
io n
li
NOLU-S™
WEAR STRIPS
28
ITEM DESCRIPTION General Curve Index:
5 0 0 1 0 a
10
3
28
8,10 m 2,70 m
TTMK-C28M-NSR-9
(3x2,7m)
13,5
Curve pages:
3
879M-880M-881M
5 0 0 2 0 a
13 5 0 0 3 0 a
5 0 0 5 0 a
10
28
3
2260M
3
8,10 m 2,70 m
TTMK-T28M-NSR-9
(3x2,7m) 5 0 0 9 1 a
10
3
28 2251M
28 5 0 1 0 1 a
13,5
3
Concept:
13,5
3
5 0 0 0 6 a
13
13
8,10 m 2,70 m
10
TTMK-T13M-NSR-9
3
(3x2,7m)
10
3
TTMK-T13M-NSR-9 TTMK-T28M-NSR-9
TTMK-C28M-NSR-9 TTMK-T28M-NSR-9 TTMK-C28M-NSR-9 TTMK-C28M-NSR-9
ITEM DESCRIPTION
SCR-TTM-110
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
50570a
App
als
cat
M at
e ri
io n
li
VG-SST-1.70-
Valu Guide® rail can be used to form a wear bed grid for metal or plastic belts.
NOTE: For even distribution of load over width of belt, use the same type of guide through out your application.
Aluminum and UHMWPE guide rail for stable and ultra low friction guiding and supporting modular conveyor belts. 13,5
Available in 3M lengths. Minimum radius 457 mm (inside edge). 11,2 10,4
Replaceable UHMWPE strips.
32
26
14
34
10
13
13
10
T-HEAD
22 SCREW M8 T-HEAD
SCREW M8
3,5
18
UHMWPE NOLU-S™
WHITE GUIDE
ITEM DESCRIPTION ITEM DESCRIPTION
Revision 001
VG-BWS-125-10 3m 30 m VG-MBG-50-NS-10 3m 30 m
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 5 8 0 a WEAR STRIPS
www.SystemPlastSmartGuide.com
e Co
See other wear strips: Version for inliners: nanc nstr
e
5 0 6 1 0 a
ucti
Maint
5 0 5 8 0 b
on
ALL
50580a
App
als
cat
M at
e ri
io n
li
See chains infeed:
5 0 6 0 0 a
continue
50580b
MATERIAL: SUPPLY:
- Metal profile in stainless steel AISI 304, AISI 430 or - 3 or 6 meters.
anodized Aluminum. APPLICATION:
- Wear strip in UHMWPE or Nolu-S™ wear strips. - Chain and belt guide.
CHARACTERISTICS:
- Very low friction coefficient.
- High resistance to chemical agents. Information about this product is only
- No liquid absorption. available on our Smart Guide® website.
29
3m 30 m
3
VG-S330M-10 VG-S4-330M-10
19
1,5 -
29,5
3
VG-A330M-10 3m 30 m
11,5
19
- -
8,2
4,6
13,5 VG-A330M-20 6m 30 m
16,5
VG-P330CM-G-200 - - - - 60 m - 60 m
30 3m 30 m
3 VG-P330CRM-G-10 VG-P330CRM-B-10 VG-P330CRM-SD-10 -
4
3
- -
3,2
10
43
2,8
continue
50580b
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 5 8 0 b WEAR STRIPS
www.SystemPlastSmartGuide.com
ucti
Maint
5 0 5 8 0 a
on
ALL
50580b
App
als
cat
M at
e ri
io n
li
Chains guide wear strips:
5 0 6 1 0 a back
50580a continue
50600a
40
VG-SP330CM-G-10 VG-SP330CM-B-10 VG-SP330CM-W-10 VG-SP330CM-SD-10 3m 30 m
4
10
43
3 VG-SP330CRM-G-10 VG-SP330CRM-B-10 VG-SP330CRM-SD-10 3m 30 m
3
-
4
10
23
40
VG-S4P330CM-G-10 VG-S4P330CM-B-10 VG-S4P330CM-W-10 VG-S4P330CM-SD-10 3m 30 m
4
10
43
3 VG-S4P330CRM-G-10 VG-S4P330CRM-B-10 VG-S4P330CRM-SD-10 3m 30 m
3
-
4
10
23
40
VG-AP330CM-G-10 VG-AP330CM-B-10 VG-AP330CM-W-10 VG-AP330CM-SD-10 3m 30 m
4
10
23
ALUMINIUM PROFILE
43
3
VG-AP330CRM-G-10 VG-AP330CRM-B-10 VG-AP330CRM-SD-10 3m 30 m
10 3
-
23
ucti
Maint
5 0 5 8 0 a
on
ALL
50600a
App
als
APPLICATION: rapid wear strip assembly with M6 or M8 screws. back continue cat
M at
e ri
50580b 50600b io n
li
50
C
30
E
D
FOR SCEWS
D
M6 M8
E
B
3,5
A 10 13 B
1
20
B 6,2 8,2
C 4,5 6
F
A
NOTES: screws are not included. NOTES: screws are not included.
ITEM DESCRIPTION ITEM DESCRIPTION
FOR PROFILE D E F FOR PROFILE D E F
M6 M8 M6 M8
30 30 20
10
30x5
M6x65
38
65
50
Ø
Ø7
Ø 38x1,5 10 10
PA-FG
WEARSTRIP CLAMP BLACK
M6 APPLICATION: support of wear strip ITEM DESCRIPTION
NOTES: screws are not included. CL-6065X38 50
TYPE A TYPE B
150
30 40 25 55
4,5
23
2626
A
Ø 6,5
70
16 10
4343
20
40
33
B
10
5 0 6 0 0 b M6 11 13,5 CSHOE-A330 -
back
50580b continue
50600b
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
5 0 5 8 0 a
on
ALL
50600b
App
als
back continue cat
M at
e ri
50600a 50610a io n
li
APPLICATION: shoes are used to help chain guide between idler wheels and wear strip
Information about this product is only
and must be fixed with M5 screws. available on our Smart Guide® website.
18
15
5
17,5
Ø 5,2
9,5
6,2
47
20
30
TK
1,5
14 GRSHOE-S330
13 10
CSHOE-S330
70 20 10
Esag. 8
110
CSHOE-S330
46 30
10
6,5
3
5
23
16
Ø 6,5
11
24 93 70 25 55
267
Esag.10
12 175
19
29,5
40
17
22
10 10
11
4 16 10
6,5
6,5
16 45 25
SIDE TRANSFER GUIDE SHOE - LEFT VERSION SIDE TRANSFER GUIDE SHOE - RIGHT VERSION
PA PA
FOR PROFILE FOR FOR PROFILE FOR
BLACK BLACK
SCREWS SCREWS
Revision 001
5 0 6 1 0 a WEAR STRIPS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
50610a
App
als
cat
M at
e ri
io n
li
back
50600b
BOTTLE
Staggered wear strips are ideal for pressureless
TRAVEL combiners. By using these wear strips you can be sure
that the product moves freely across the chains. During
installation the correct orientation of the profiles has to
be respected.
0,2
10
MATERIAL:
30 30 VG-P330CWSM-NS-20 6m 30 m Extruded ultra high molecular weight polyethylene.
3,2
-Water absorption = 0.
back
50600b
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 6 5 0 a BAR CAPS
www.SystemPlastSmartGuide.com
MATERIAL: e Co
nanc nstr
Extruded ultra high molecular weight polyethylene.
ucti
Maint
** Extruded high molecular weight polyethylene.
on
ALL
50650a
App
als
Water absorption coefficient = 0. cat
M at
e ri
io n
li
See other bar caps:
5 0 6 5 0 b
ITEM DESCRIPTION
1,0
R 3,1 VG-P105RCL-100 VG-P105R-100 30 m - 30 m
R 1,4
- -
8,5
2 -2,4 mm
VG-P105RCL-250 VG-P105R-250 75 m - 75 m
6,1
2,5
4,5
- - - - 30 m - 30 m
15,6
2-2,4 mm
8
3,3
3,2
- VG-P18BC-NS-100 - VG-P18BC-100 30 m - 30 m
12,7
3,2 mm
9,5
12,7
4,1
3,2
VG-PM4BC-NS-100 - VG-PM4BC-100 30 m - 30 m
-
12,7
4 mm
- - VG-PM4BC-250 75 m - 75 m
9,5
10,8
5,3
3
- - - VG-P316BC-100 30 m - 30 m
10,7
5,2 mm
7,7
16
5,1
4,5
- - - VG-P7GABC-100 30 m - 30 m
19
5 mm
14,5
,9
R8
half round
rod 16 mm VG-P58MR-NSR-100 - VG-P58MR-W-100 VG-P58MR-100 30 m - 30 m
9
diameter
R1
Revision 001
0,
0,75 5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 6 5 0 b BAR CAPS
www.SystemPlastSmartGuide.com
MATERIAL: e Co
nanc nstr
Extruded ultra high molecular weight polyethylene.
ucti
Maint
** Extruded high molecular weight polyethylene.
on
ALL
50650b
App
als
Water absorption coefficient = 0. cat
M at
e ri
io n
li
NOLU-S™ ** HMWPE UHMWPE
BAR CAP WHITE WHITE
Min. order quantity: 252 m
ITEM DESCRIPTION
12,6
6,8
3
VG-P14BC-NS-100 - VG-P14BC-100 30 m - 30 m
12,6
6,7 mm
9,6
12,7
8,1
3,1
VG-P516BC-NS-100 - VG-P516BC-100 30 m - 30 m
12,7
8 mm
9,7
18,5
10
3,5
VG-PM10BC-NS-250 - VG-PM10BC-250 75 m - 75 m
16
10 mm
12,5
29
5,3
6,8
VG-P7GAHD-NS-20 - VG-P7GAHD-20 6m 60 m
23,3
18,2
5.2 mm
11
3,2
8,5
- - VG-P18HD-20 - 6m 60 m
19
3,1 mm
10,5
16
8,7
4,8
VG-P316HD-20
- - - 6m 60 m
19
10,3
4,7 mm
16,2
8,7
6,4
- - VG-P14HD-20 - 6m 60 m
19
10,3
6.3 mm
31
25
- VG-P1x1BC-W-20 - 6m - 6m
32
25
Revision 001
25 mm
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 0 6 5 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
Flanges
for Return Rollers 5 1 0 9 0 a
Wearshoes
for return system
5 1 1 7 0 a
Information about this product is only available on our Smart Guide® website.
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
50 84 50 50 85 50 50 85 50 50 88 50 nanc nstr
ucti
Maint
82,5 1,5 82,5 82,5 2,5 82,5 83,8 1,2 83,8 82,5 5,5 82,5
on
ALL
51020a
App
als
cat
M at
e ri
io n
li
1,8 4
Ø 26
ITEM DESCRIPTION
Ø
External diameter
SPACER (LENGTH 39 mm)
FOR ROD
Ø 26
Ø 26
MATERIAL Ø 12 Ø 16 Ø 18 Ø 20
Ø
ITEM DESCRIPTION
External diameter
RETURN ROLLER WITH FLANGE
FOR ROD
Ø 51
Ø 51
Ø 41
Ø 41
Ø
MATERIAL Ø 12 Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
0,5 2,2 0,5 2,2 PE-HD BLACK RF-41B12ML28-PEB RF-41B16ML28-PEB RF-41B18ML28-PEB RF-41B20ML28-PEB 100
27,5 27,5
External diameter
RETURN ROLLER
Ø 24,5
FOR ROD
Ø 41
Ø 42
Ø 41
Ø 42
Ø
MATERIAL Ø 12 Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
49 49 PE-HD BLACK R-41B12ML51-PEB R-41B16ML51-PEB R-41B18ML51-PEB R-41B20ML51-PEB 100
51 51
External diameter
1,8 1,8
Ø 41
Ø 42
Ø 42
MATERIAL Ø 12 Ø 16 Ø 18 Ø 20
Ø
ITEM DESCRIPTION
PE-HD BLACK RF-41B12ML51-PEB RF-41B16ML51-PEB RF-41B18ML51-PEB RF-41B20ML51-PEB 100
49 49
51 51
External diameter
4 4 RETURN ROLLER WITH CENTER FLANGE
FOR ROD
MATERIAL Ø 12 Ø 16 Ø 18 Ø 20
Ø 24,5
Ø 49,5
Ø 24,5
ITEM DESCRIPTION
Ø 41
Ø 41
Ø
Ø
45 45 External diameter
Revision 001
47 47 Information about
this product is only available
Also available in green color. Go to: 5 1 0 6 0 a on our Smart Guide® website.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
53 nanc nstr
ucti
Maint
44
on
ALL
51030a
30 21,5 8,5
App
als
cat
M at
e ri
io n
li
Ø 56,5
Ø 47
Ø 68
Ø 12
Ø 60
Ø 20
27,5
19,5
65 120 65 65 120 65
114,3 5,7 114,3 114,3 1425,7 114,3 142
5,7 5,7
31 31 31 31
Go to: 5 1 0 2 0 a Go to: 5 1 0 2 0 a
Ø 21
Ø 50
Ø 21
Ø 50
Ø 15
Ø 15
2 37 4 4 36 0,5
43 40,5
50 88 50
82,5 5,5 82,5
RETURN ROLLER WITH FLANGE RETURN ROLLER
e Co
nanc nstr
ucti
27
Maint
on
ALL
51040a
App
als
cat
CHARACTERISTICS: M at
e ri
io n
li
- Very low friction coefficient.
- No liquid absorption.
Ø 50
Ø 25
Ø
Ø 50
27
Ø 25
Ø 57
Ø
External
diameter
WATERTIGHT ROLLER WITH RUBBER
FOR ROD
23 2 MATERIAL Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
PE-HD GREEN RR-57B16ML27-PEG RR-57B18ML27-PEG RR-57B20ML27-PEG 100
ROLLER
Ø 49
FOR ROD
MATERIAL Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
Revision 001
e Co
CHARACTERISTICS: nanc nstr
ucti
Maint
- Very low friction coefficient.
on
ALL
51050a
- No liquid absorption.
App
als
- Excellent wear and chemical resistance. cat
M at
e ri
L io n
li
- Completely closed structure, easier to clean and disinfect.
- Watertight.
External
diameter
WATERTIGHT ROLLER
Ø 25,5
FOR ROD
ØE
Ø
MATERIAL ØE ØF L K Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
- 40,5 1,5 R-50B16ML41-PEG R-50B18ML41-PEG R-50B20ML41-PEG
PE-HD 50
K - 43 4 R-50B16ML43-PEG R-50B18ML43-PEG R-50B20ML43-PEG 100
GREEN
60 - 40,5 1,5 R-60B16ML41-PEG R-60B18ML41-PEG R-60B20ML41-PEG
L VERSION WITH FLANGE
PE-HD 50 65 RF-50B16ML43-PEG RF-50B18ML43-PEG RF-50B20ML43-PEG
43 4 100
GREEN 60 75 RF-60B16ML43-PEG RF-60B18ML43-PEG RF-60B20ML43-PEG
Ø 25,5
ØE
ØF
VERSION WITH
FLANGE
K
CHARACTERISTICS:
- Reduced noise level with rubber
- Very low friction coefficient.
- No liquid absorption.
- Excellent wear and chemical resistance.
- Completely closed structure, easier to clean and disinfect.
- Watertight.
50 85 50 50 88 50
L 82,5 2,5 82,5 82,5 5,5 82,5
2
Ø 25,5
ØE
Ø
K
External
diameter
WATERTIGHT ROLLER WITH RUBBER
L
FOR ROD
MATERIAL ØE ØF L K Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
- 40,5 1,5 RR-57B16ML41-PEG RR-57B18ML41-PEG RR-57B20ML41-PEG
Ø 25,5
PE-HD 57
ØE
ØF
e Co
50 50 50 85 50 50 85 50 50 88 50 nanc nstr
84
ucti
Maint
82,5 1,5 82,5 82,5 2,5 82,5 83,8 1,2 83,8 82,5 5,5 82,5
on
ALL
51060a
App
als
cat
M at
e ri
io n
li
1,8 4
Ø 26
ITEM DESCRIPTION
Ø
Ø 26
Ø
ITEM DESCRIPTION
39 PA GREEN R-26B12ML39-PAG
39 R-26B16ML39-PAG R-26B18ML39-PAG R-26B20ML39-PAG 100
External diameter
Ø 51
Ø 41
Ø 41
MATERIAL Ø 12 Ø 16 Ø 18 Ø 20
Ø
ITEM DESCRIPTION
PE-HD
0,5 2,2 0,5 GREEN
2,2 RF-41B12ML28-PEG RF-41B16ML28-PEG RF-41B18ML28-PEG RF-41B20ML28-PEG 100
27,5 27,5
External diameter
RETURN ROLLER
FOR ROD
Ø 24,5
Ø 24,5
Ø 41
Ø 42
MATERIAL Ø 12
Ø 41
Ø 42
Ø 16 Ø 18 Ø 20
Ø
ITEM DESCRIPTION
PE-HD
R-41B12ML51-PEG R-41B16ML51-PEG R-41B18ML51-PEG R-41B20ML51-PEG 100
49 GREEN 49
51 51
External diameter
1,8 1,8
RETURN ROLLER WITH CENTER FLANGE
FOR ROD
MATERIAL Ø 12 Ø 16 Ø 18 Ø 20
Ø 49,5
Ø 49,5
Ø 24,5
Ø 24,5
Ø 41
Ø 41
Ø 42
Ø 42
ITEM DESCRIPTION
Ø
PE-HD
RF-41B12ML51-PEG - RF-41B18ML51-PEG RF-41B20ML51-PEG 100
GREEN
49 49
External diameter
51 51
Ø 49,5
Ø 24,5
ITEM DESCRIPTION
Ø 41
Ø 41
Ø
Ø
PE-HD
RF-41B12ML47-PEG RF-41B16ML47-PEG RF-41B18ML47-PEG - 100
GREEN
45 45
External diameter
47 Information
47 about
Revision 001
e Co
CHARACTERISTICS: Also available with improved nanc nstr
- Very low friction coefficient
ucti
Maint
chemical resistance, go to:
on
- No liquid absorption ALL
51080a
App
als
cat
M at
e ri
- Completely closed structure, easier to clean and disinfect io n
li
- Watertight
85,8
L 84,5 hub
Information about
ØF
ØE
ØE
Ø
Ø
WATERTIGHT ROLLER
FOR ROD
MATE-
ØE L F Ø 12 Ø 14 Ø 16 Ø 18 Ø 20
RIAL
ITEM DESCRIPTION
External diameter
STANDARD VERSION
82,5 - - - R-40B16ML83-PEG R-40B18ML83-PEG R-40B20ML83-PEG
40
84,5 - - - R-40B16ML85-PEG R-40B18ML85-PEG R-40B20ML85-PEG
PE-HD 82,5 - - - R-50B16ML83-PEG R-50B18ML83-PEG R-50B20ML83-PEG
50 50
GREEN 84,5 - - - R-50B16ML85-PEG R-50B18ML85-PEG R-50B20ML85-PEG
82,5 - - - R-60B16ML83-PEG R-60B18ML83-PEG R-60B20ML83-PEG
60
84,5 - R-60B12ML85-PEG R-60B14ML85-PEG R-60B16ML85-PEG R-60B18ML85-PEG R-60B20ML85-PEG
85,8
L = hub
L
ØE
ØE
ØF
Ø
Ø
GREEN
67 85,8 75 RRF-60B16ML86-PEG RRF-60B18ML86-PEG RRF-60B20ML86-PEG
RUBBER MATERIAL: TPR
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
51090a
App
als
GUIDE FLANGE cat
M at
e ri
io n
li
CHARACTERISTICS:
- No liquid absorption.
- Excellent wear and chemical resistance.
100 50 85 50
ØE
82,5 82,5 2,5 82,5
2 2
Ø 2 -0.1
0
GUIDE FLANGE
FOR PIN
MATERIAL ØE Ø 14 Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
50 F-50B14ML2-PPG F-50B16ML2-PPG F-50B18ML2-PPG F-50B20ML2-PPG
60 F-60B14ML2-PPG F-60B16ML2-PPG F-60B18ML2-PPG F-60B20ML2-PPG
PP
70 F-70B14ML2-PPG F-70B16ML2-PPG F-70B18ML2-PPG F-70B20ML2-PPG 100
GREEN
75 F-75B14ML2-PPG - F-75B18ML2-PPG F-75B20ML2-PPG
100 - - F-100B18ML2-PPG F-100B20ML2-PPG
105 50 85 50
ØE 82,5 82,5 2,5 82,5
Ø 25,5
Ø 60
Ø 20 S
GUIDE FLANGE
FOR PIN
MATERIAL ØE S Ø 20
ITEM DESCRIPTION
25,5 7,25 F-26B20ML7-PPG
PP
Revision 001
ucti
Maint
on
ALL
5 1 0 8 0 a
51110a
L
WATERTIGHT ROLLER
App
als
80 cat
M at
e ri
io n
li
CHARACTERISTICS:
- Very low friction coefficient.
- No liquid absorption.
ØE
Ø
WATERTIGHT ROLLER
FOR ROD
MATERIAL ØE L Ø 15 Ø 16 Ø 18 Ø 20
ITEM DESCRIPTION
82,5 R-40B15ML83-PEB-S R-40B16ML83-PEB-S R-40B18ML83-PEB-S R-40B20ML83-PEB-S
External diameter
40
84,5 R-40B15ML85-PEB-S R-40B16ML85-PEB-S R-40B18ML85-PEB-S R-40B20ML85-PEB-S
82,5 R-50B15ML83-PEB-S R-50B16ML83-PEB-S R-50B18ML83-PEB-S R-50B20ML83-PEB-S
PE BLACK 50 50
84,5 R-50B15ML85-PEB-S R-50B16ML85-PEB-S R-50B18ML85-PEB-S R-50B20ML85-PEB-S
82,5 R-60B15ML83-PEB-S R-60B16ML83-PEB-S R-60B18ML83-PEB-S R-60B20ML83-PEB-S
60
84,5 R-60B15ML85-PEB-S R-60B16ML85-PEB-S R-60B18ML85-PEB-S R-60B20ML85-PEB-S
L
80
76
ØEs
ØE
Ø
50 85 50 82,5 85 82,5 50 85 50
82,5 2,5 82,5 82,5 2,5 82,5 82,5 2,5 82,5
2 2
1,75
For flanges for return
rollers, go to:
5 1 0 9 0 a
Revision 001
e Co
nanc nstr
ucti
Maint
on
ALL
51120a
50 85 50
App
als
cat
82,5 2,5 82,5 M at
e ri
io n
li
84 1 84
Information about
this product is only
available on our
Smart Guide® website.
WEAR STRIP
6,2
5 MATERIAL ITEM DESCRIPTION
PE GREEN VG-F206M-G-200 60 m 60 m
10
20
PE BLACK VG-F206M-B-200 60 m 60 m
Nolu®-S VG-F206M-NS-200 60 m 60 m
R 10
WEAR STRIP
PE GREEN VG-F205M-G-200 60 m 60 m
PE BLACK VG-F205M-B-200 60 m 60 m
5
5 1 1 3 0 a
25
25
MATERIAL 20x20 Ø 20
20,5
38
ITEM DESCRIPTION
13
13
For solutions for 101.6 (4”) and 114.3 ( 4 1/2 ) top plates, go to: 5 1 1 6 0 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
5 1 1 2 0 a
51130a
App
als
cat
M at
e ri
io n
li
Side Centre
version version
LITTLE WASHER
32 4 3 3 4 3
26
27 7 10
Ø MATE-
3
15 14
RIAL 20x20 Ø 20 Ø 20
ITEM DESCRIPTION
47
47
20,5
BLACK
13
13
20,5 4 Ø 20
APPLICATION EXAMPLE
100 50 85 100 50 50 88 50 110 50
82,5 82,5 2,5 82,5
82,5 84,5 3,5 84,5 82,5
4 83,5 24 83,5 84 4 84
3,5 3,5 11
75
75 2 BIG STRIKER
Ø3 2,5 2 2,5
MATERIAL
20x20 Ø 20
56
60
38,1
45
ITEM DESCRIPTION
20,5
16,5
13
5 26 7
26,2
75
75
Ø3 7 BIG STRIKER
23
MATERIAL
20x20 Ø 20
56
55
15
ITEM DESCRIPTION
20,5
60°
18
16
13
75
R.5 37,5 37,5 11 APPLICATION EXAMPLE
EXTRA STRIKER
MATERIAL 20x20
55
20,5
Revision 001
e Co
nanc nstr
e
26
ucti
Maint
on
Ø3 ALL
51150a
App
als
cat
M at
e ri
io n
li
15
H
H1
Ø 13,2 15
Ø 18 Ø 20
MATERIAL H H1
ITEM DESCRIPTION
SPT-15R18C - 34 42.5
PA BLACK 100
- SPT-15R20C 30 38
H
H1
Ø 15
17 26 62
105
Ø 18 Ø 20
MATERIAL H H1
ITEM DESCRIPTION
SHOE-15L105-R18C-PAB - 34 42,5
PA BLACK 100
- SHOE-15L105-R20C-PAB 30 38
101,5
26,5
26
40,5
R
75
23
25,6
30,5
53
SLIDING SHOE
For chain return
components, go to:
MATERIAL ITEM DESCRIPTION
5 1 1 2 0 a
Revision 001
PE GREEN 100
SHOE-53L102-S25C-PEG
5 1 1 3 0 a
USE: with spacers SPT-84-R20C.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
51160a
App
als
cat
M at
e ri
io n
li
26 5
12
15
47
36,5
36,5
36,5
20,5
20,5
20,5
20,5
9,5
20,5 4 1620,5 20,5
7,5 27 15 27 7,5 26 26 26
84
WASHER
MATERIAL
84 4 9.5 16
ITEM DESCRIPTION
SLIDING SHOE
FOR SQUARE SHAFT Information about
MATERIAL 20X20 this product is only
ITEM DESCRIPTION available on our
Smart Guide® website.
PE BLACK SHOE-84L68-S20-PEB 100
5 100 50 85 50
82,5 82,5 2.5 82,5
28
41,5
13,5
20,5
5 1 1 7 0 a SLIDING SHOE
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
14,5
Ø
24,5
51170a
App
als
cat
M at
e ri
io n
li
42
Ø6
80,5
Lg
120
SNAP-ON SELF-ADJUSTING 244
SLIDING SHOE
Ø 18 Ø 20 50 Lg. 50
MATERIAL LG 82,5 5,5 82,5
ITEM DESCRIPTION
SHOE-84L244-R18C-PEB SHOE-84L244-R20C-PEB 84
PUSH
PE BLACK - SHOE-85L244-R20C-PEB 85 Lg.
- SHOE-88L244-R20C-PEB 88
50
SHOE-84L244-R18C-PEG SHOE-84L244-R20C-PEG 84
PE GREEN - SHOE-85L244-R20C-PEG 85
ROD Ø 18-20
- SHOE-88L244-R20C-PEG 88
162
R102
35
31
25
16
100 50 50
R
90
5
89,5 1 89,5
89
85
Revision 001
2
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
Single clamps
5 1 7 2 0 a
5 1 6 0 0 a
Double clamps
5 1 6 1 0 a 5 1 7 3 0 a
5 1 5 2 0 a 5 1 6 3 0 a
PRODUCT GUIDES
90
87
90
140
78
87
78
5 1 6 6 0 a 5 1 6 8 0 a 5 1 6 9 0 a 5 1 7 0 0 a 5 1 7 0 3 a
5 1 8 3 0 a 5 1 8 1 0 a 5 1 8 2 0 a 5 1 7 4 0 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
51520a
App
als
cat
M at
e ri
io n
li
For clamps, go to:
5 1 5 1 0 a
continue
51520b
UHMWPE HIGH
METAL UHMWPE UHMWPE NOLU-S™
ANTISTATIC TEMPERATURE
PROFILE WHITE BLACK BLACK RESISTANT
MATE-
RIAL ITEM DESCRIPTION
R7
VG-LSSR-10 VG-LSSR-B-10 VG-LSSR-NS-10 VG-LSSR-SD-10 30 m 3m
-
17
17,5
VG-LGSR-10 VG-LGSR-B-10 30 m 3m
- - -
VG-LGSR-20 VG-LGSR-B-20 30 m 6m
R7
R7
VG-LSSRS-10 30 m 3m
17,5
17
- - - -
17
17,5
VG-LSSRS-20 30 m 6m
R17,5
VG-LSSM-10 VG-LSSM-B-10 VG-LSSM-NS-10 VG-LSSM-SD-10 30 m 3m
R7 -
12,5
17
17,5
-
17,5 VG-LSSM-20 VG-LSSM-B-20 VG-LSSM-NS-20 VG-LSSM-SD-20 30 m 6m
17
R15,6
12,5 VG-LSSMS-10 30 m 3m
R50
- - - -
17,5 12,5
17
- - - -
17,5 VG-LSSMS-20 30 m 6m
17
VG-LSSF-10 30 m 3m
- - - VG-SSF-HT-10
VG-LSSF-20 30 m 6m
17
11
VG-LGSF-10 VG-LGSF-B-10 - - - 30 m 3m
17,5
VG-LGSF-20 VG-LGSF-B-20 - - - 30 m 6m
11
8,7
VG-LSST-.75-10 - - - - 30 m 3m
17,5
18,5
17
17
VG-LSST-.75-20 - - - - 30 m 6m
20
18,54,8
VG-LSSWF-10 - - - - 30 m 3m
8,7
25,4
17
20
VG-LSSWF-20 - - - - 30 m 6m
17,5
17
Revision 001
continue
51520b
17,5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
51520b
App
als
cat
M at
e ri
io n
li
For clamps, go to:
5 1 5 1 0 a Min. order quantity: 180 m
back
51520a continue
51520c
*60m
VG-LSST-1.00-10 - - 30 m 3m
25,4
17
20 VG-LSST-1.00-20 - - 30 m 6m
25,43,5
VG-LSSWF-1.25-10 - - 30 m 3m
8
20
31,75
17
17
VG-LSSWF-1.25-20 - - 30 m 6m
17,5
6,5
VG-LSST-1.25-10 VG-LSST-1.25-NS-10 VG-LSST-1.25-SD-10 30 m 3m
31,75
31,75
17
17,5
VG-LGST-1.25-10 - - 30 m 3m
17 - -
21 VG-LGST-1.25-20 30 m 6m
9,7
6,35
31,75
25,4
VG-LSSMT1.00-10 - - 30 m 3m
31,75
6,5
17
21
30,7
17
6,5
VG-SSTS-1.25-10 30 m 3m
- -
31,75
17
- -
VG-SSTS-1.25-20 30 m 6m
21
31,75
8
21
17
40
17
40
back
51520a continue
51520c
8
21
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
51520c
App
als
cat
M at
e ri
io n
li
For clamps, go to:
UHMWPE UHMWPE
METAL
5 1 5 1 0 a PROFILE WHITE BLACK
back
51520b
MATERIAL
ITEM DESCRIPTION
VG-LSST-1.70-10 - 30 m 3m
17
43
VG-LSST-1.70-20 - 30 m 6m
21
43
21
VG-LSST-2.25-10 VG-LSST-2.25-B-10 30 m 3m
8
21
57,15
17
17
VG-LSST-2.25-20 VG-LSST-2.25-B-20 30 m 6m
7,9
6,3
57,15 3,5
R3
21
7,9
VG-LSST200R-10 - 30 m 3m
51
17
33
17
22,5
25°
51 30 m 3m
VG-LSSMT008-10 -
33
R3
3,5
17
- 30 m 6m
17,5
VG-LSSMT008-20
2
22,5
6,3
3
172
1725°
VG-LSSMT024-10 VG-LSSMT024-B-10 30 m 3m
6 17,5
20
17
21
VG-SSMT-10 - 30 m 3m
20
16,7
6
12,5
7,5
VG-SSMT-20 - 30 m 6m
3
18,2
21
8,5
12,5
17
= =
VG-SSNG-10 - 30 m 3m
17
3
18,2
21,5
Revision 001
16,7
3 Min. order quantity: 180 m
back
51520b
8,5
1,5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
51600a
5 1 5 2 0 a 5 3 5 1 0 a
App
als
cat
M at
e ri
io n
li
continue
51610a
37
37
37
20,5 20,5 20,5
M8
20
27
27
16,5 27
M5 97 45,5
2,5 M5
ØB
ØA
26
26
Ø
28 17,5 28 17,5
WITHOUT
CLAMP Ø 12 Ø 14 Ø 16 WITH SCREW
ØA ØB ROD
TYPE
ITEM DESCRIPTION ITEM DESCRIPTION
10 12 1 CL-CON-P12M CL-CON-P12100M - - CL-CON-P-M8 50
50
12 13,5 2 CL-CON-P14M - CL-CON-P14100M CL-CON-P16100M MATERIAL: clamp in reinforced polyamide
(PA-FG Black), bolts in stainless steel, nut
Material: clamp in reinforced polyamide (PA-FG Black), bolt in stainless steel, nut in nickel plated brass.
in nickel plated brass.
Supply: assembled.
SUPPLY: assembled.
14,5 14,5
CL-CON-PS CL-CON-PS12100M 50
14 113 14
ØDP
30
30
Ø
° 60
60 °
35 35
113
Screw
26
26
M6x20
M6x20 M6x20
5 1 5 2 0 a 5 3 5 1 0 a Nut M6
continue
51610a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
51610a
App
als
cat
M at
e ri
io n
li
h 17
Ø
63
93
back
51600a continue
51620a
100
17,5
33,5
53
56
Material: reinforced polyamide, (PA-FG Black) nut, washer rod in stainless steel. 5 1 5 2 0 a
Supply: assembled.
WITHOUT
Ø 12 Ø 14 Ø 16
ROD For brackets, go to:
ITEM DESCRIPTION
5 3 5 1 0 a
CL-CON-PD CL-CON-PD12100M CL-CON-PD14100M CL-CON-PD16100M 50
9 12,5
Ø12
100
Hex 17
ØDP
9 12,5
Ø12
A
ØDP
24,5
B
L
13,5 8
21,5
Use: to support rods or conical guide rails with increased centers. profiles,
21,5
back
51600a continue
51620a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
Material: Stainless Steel (AISI 304) ALL
51620a
App
als
cat
M at
e ri
io n
li
For profiles, go to: back
51610a continue
51630a
5 1 5 2 0 a
38 13
2
WITHOUT
Ø ROD
19
39
ITEM DESCRIPTION
9 VG-012-01 50
9
38 13
2,5
ROD
C
A
mm mm
ITEM DESCRIPTION
63,5 86 VG-011-01
84 106,5 VG-011-04 50
95,2 117,7 VG-011-03
38 13
2,5
WITHOUT ROD
Ø 10,5
ITEM DESCRIPTION
63,5
VG-011-02 50
150
63,5
5 3 5 1 0 a
RAIL CONNECTOR
CONNECTING ELEMENT
Use: to connect two guide rails.
The part can be tapped on with a hammer.
Material: Stainless Steel (AISI 304). For brackets,
go to:
5 3 5 1 0 a
L D THREADED SIZE = M8
21
mm For profiles,
ITEM DESCRIPTION
2
11,5 L go to:
Revision 001
38 VG-013-015
50 5 1 5 2 0 a
50 VG-013-01
back
51610a continue
51630a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
included. ALL
51630a
App
als
cat
M at
2,5
e ri
26 Kgm. io n
li
Material: Stainless Steel (AISI 304)
14,5
K back
51620a
ITEM DESCRIPTION
mm
K
15,2 VG-018M-01
M8
20 VG-018M-02
100
25,5 VG-018M-03
30 VG-018M-04
ITEM DESCRIPTION
15
M6
VG-009M-01 100
24
19
WITHOUT ROD
Ø8 29 ITEM DESCRIPTION
VG-016-02 50
ØD
59
Supply: assembled.
Use: mount on Ø 12 diameter rod or 25x6 - 25x8, 25x10 flat bar.
S ROUND
FLAT
BAR L S T T1 ITEM DESCRIPTION
BAR
16,2 ØD
17,5
25x6 Ø 12 34 6,5 22,5 25,5 VG-022-01
- 33 9 21,5 25,5 CL-CON-P258M
25x8
25x8 50
28
M8
- 40 9 28 32 CL-CON-P258WM
25x10 - 34 10,5 21,5 26,5 CL-CON-P2510M
T1
T
For profiles, go to: For profiles, go to: For profiles, go to: For brackets, go to:
Revision 001
5 1 5 2 0 a 5 1 7 3 0 a 5 2 5 7 2 a 5 3 5 1 0 a
back
51620a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 1 6 3 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
51640a
App
als
cat
M at
e ri
io n
li
5 3 5 1 0 a
continue
51650a
20
27
27
20
27
20.5 20,5 20,5
37
37 37
34.5
34,5
12 97 37
2.5 6,5
6
Ø
Ø
Ø
Ø12
Ø10
M8
Ø
26
26
M5 M5
Material: clamp in reinforced polyamide, bolt in stainless steel, nut in nickel plated Material: clamp in reinforced polyamide, bolt
brass, rod in stainless steel AISI 303. in stainless steel, nut in nickel plated brass.
Supply: assembled. Supply: assembled.
M6 M6
40
in stainless steel.
50 Supply: assembled.
45 94 45
WITHOUT
139 Ø 12 Ø 14 Ø 16
ROD
ITEM DESCRIPTION
142,5
CL-RD20-P CL-RD20-P12100M CL-RD20-P14100M CL-RD20-P16100M
Ø DP
34,5
for Ø for Ø
20 20
Min. order quantity: 300 pcs.
Revision 001
38,5 38,5
31,5
continue
51650a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
For brackets, go to:
ucti
Maint
on
ALL
51650a
5 3 5 1 0 a
App
als
cat
M at
e ri
io n
li
Material: clamp in reinforced polyamide,
Ex.17
92,5
Ø
68
back
51640a
Supply: assembled.
WITHOUT
Ø 12 Ø 14 Ø 16
100 ROD
Ø 12
ITEM DESCRIPTION
A
40
CL-RD12-PD CL-RD12-PD12100M CL-RD12-PD14100M CL-RD12-PD16100M 50
Ø
A
A
85
WITHOUT ROD Ø 12 Ø 14 Ø 16
TYPE DP A
ITEM DESCRIPTION
8 68
A CL-RD8-PD CL-RD8-PD12100M CL-RD8-PD14100M CL-RD8-PD16100M
10 66 12,5 63 12,5
50
10 66
B CL-RD10-PD CL-RD10-PD12100M CL-RD10-PD14100M CL-RD10-PD16100M
23 23
12 64
APPLICATION EXAMPLE
TYPE A TYPE B
Flange position for assembling Flange position for assembling Flange position for assembling Flange position for assembling
guides with diam. d = 8 mm. guides with diam. d = 10 mm. guides with diam. d = 10 mm. guides with diam. d = 12 mm.
66
66
66
68
68
64
64
L
Ex. 10
ITEM DESCRIPTION
8 58 33 21 18 16 CL-RD8-P258M
M8
WITHOUT ROD
M6
Ø
Y
10 58 33 21 18,5 16 CL-RD10-P258M
Revision 001
ITEM DESCRIPTION 50
5,5 7
12 59 34.5 24 21 19 CL-RD12-P258M
CL-RD8-PF 50 14 58 34 25 22 17.5 CL-RD14-P258M
14,5 3
back
51640a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
METAL PROFILE
UHMWPE GREEN UHMWPE BLACK
MATERIAL
Item description
10 0
R1 VG-SD-G-10 VG-SD-B-10 3m
VG-SD-G-20 VG-SD-B-20 6m
20
VG-GD-G-10 VG-GD-B-10 3m
15
20 VG-GD-G-20 VG-GD-B-20 6m
e Co
nanc nstr
ucti
Maint
on
ALL
51660a
App
als
cat
M at
e ri
io n
li
WITHOUT ROD WITH ROD WITH M8 SCREW
35,5
2,5 14 35,5 For loose
profiles, go to:
5 1 6 6 0 b
Ø12
Ø10
59
59
M8
59
Ø
20
Material: clamp in reinforced polyamide, bolt in stainless steel, nut in nickel Material: clamp in reinforced polyamide, bolt in stainless steel, nut in
plated brass, rod in stainless steel AISI 303. nickel plated brass.
Supply: unassembled. Supply: unassembled.
WITHOUT
Ø 12 Ø 14 Ø 16 WITH SCREW Min. order quantity: 300 pcs.
ROD
ITEM DESCRIPTION ITEM DESCRIPTION
CL-D-P12M CL-D-P12100M CL-D-P14100M CL-D-P16100M 100 CL-D-P-M8 100
SINGLE PLASTIC CLAMP FOR FLAT BAR DOUBLE PLASTIC CLAMP WITH ROD
36
35,5 20
M5
20
26
25x8
90
57
Ø
3,5 7 19 95 26,5
Material: clamp in reinforced polyamide, Material: clamp in reinforced
M8
Supply: assembled.
31
Supply: unassembled.
53
Ø8,2
20
43,5
WITHOUT WITHOUT
Ø 12 Ø 14 Ø 16
ROD ROD
Revision 001
e Co
nanc nstr
For index side
ucti
Maint
guides, go to:
on
ALL
51660b
5 1 5 1 0 a
App
als
cat
M at
e ri
io n
li
STAINLESS STEEL ZINC PLATED STEEL
ITEM DESCRIPTION
1,5
VG-S1020M-10 VG-G1020M-10 3m
20
10
VG-S1020M-20 VG-G1020M-20 6m
10
NOLU-S™
UHMWPE GREEN UHMWPE BLACK
ITEM DESCRIPTION
0
R1 VG-PD-G-10 VG-PD-B-10 VG-PD-NS-10 3m
VG-PD-G-20 VG-PD-B-20 - 6m
15
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
GUIDE RAILS (FLAT TYPE)
ucti
Maint
41
on
ALL
51680a
App
als
cat
M at
e ri
io n
li
Characteristics:
5,87
- Profile can be bent or calendered by means of usual systems.
09
23
6
- Coefficient of linear expansion: 2.5 x 10 -4.
- Temperature range for continuous use in air: -35°C / +70°C.
- Min. bending radius: 200 mm.
78,5
90
32
6 ITEM DESCRIPTION
Notes: when sealing the ends, a 2 mm space must be left between the
silicone and the end of the bar to compensate for linear contraction of the
guide rail at low temparatures. MATERIAL: PE-500 GREEN
VG-H9014M-G-10 3m
Characteristics: To use this guide, a 30x5 mm steelbar should be inserted. 30 m
VG-H9014M-G-20 6m
6.5
14 5 3 5 1 0 a
95
22
34
30
30
25 110
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
Material: Polyethylene PE 500.
on
For brackets, go to: ALL
51690a
16,5
App
als
Characteristics: 5 3 5 1 0 a cat
M at
e ri
io n
li
– Profile can be bent or calendered by means of usual systems.
– Coefficient of linear expansion: 2.5 x 10 -4.
– Temperature range for continuous use in air: -35°C / +70°C.
– Min. bending radius: 200 mm.
70,5
ITEM DESCRIPTION
67
78
Notes: when sealing the ends, a 2 mm space must be left between the PE-500 PE-500
silicone and the end of the bar to compensate for linear contraction of BLACK LIGHT BLUE
the guide rail at low temparatures. VG-H7816M-B-10 VG-H7816M-BL-10 3m
30 m
VG-H7816M-B-20 VG-H7816M-BL-20 6m
Characteristics: To use this guide, a 60x6 mm steel bar or double 13,5 6
M-Profile should be inserted.
Ø4,5
Ø4,5
35 30 5 30 35 30 5 30
8,5
8,5
5 5 35 30 5 30
8,5
5
ITEM ITEM ITEM
DESCRIPTION DESCRIPTION DESCRIPTION
1,5 1,5 1,5
65
65
82
82
65
82
8,5
100 100
8,5
100 *Packaging: 10 pieces,
18 5,5 18 18 complete with fixing screws.
Ø 12 Ø 14 Ø 16
ROD
100
ITEM DESCRIPTION
CL-H7816M-P CL-H7816M-P12100M CL-H7816M-P14100M CL-H7816M-P16100M
60 30
100
WITHOUT
Ø 12 Ø 14 Ø 16
5
ROD
50 20
60 ITEM DESCRIPTION
CL-H7816M-S CL-H7816M-S12100M CL-H7816M-S14100M CL-H7816M-S16100M
3
CLAMP SWIVEL TYPE
Screw M8 Two pieces
Material: clamp, screws, washer and rod in stainless steel
5
82
AISI 304.
50 Surface: tumbling finish. Supply: unassembled.
WITHOUT
Ø 12 Ø 14 Ø 16
31 ROD
ITEM DESCRIPTION
30
22
Min. order quantity: 500 pcs.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
For brackets, go to: ALL
51700a
App
als
15,5 5 3 5 1 0 a cat
M at
e ri
io n
li
Characteristics:
– Profile can be bent or calendered by means of usual systems.
– Coefficient of linear expansion: 2.5 x 10 -4.
– Temperature range for continuous use in air: -35°C / +70°C.
– Min. bending radius: 200 mm. ITEM DESCRIPTION
87
65
76
PE-500 PE-500
Notes: when sealing the ends, a 2 mm space must be left BLACK LIGHT BLUE
between the silicone and the end of the bar to compensate for VG-H8716M-B-10 VG-H8716M-BL-10 3m
linear contraction of the guide rail at low temparatures. 30 m
VG-H8716M-B-20 VG-H8716M-BL-20 6m
Characteristics: To use this guide, a 60x6 mm steel bar or double
M-Profile should be inserted. 5
12,5
Ø4,5
Ø4,5
11,5
Ø4,5
11,5
30 5 30 5 3030 30 5 30 30 5 30
11,5
5 5 30
ITEM ITEM ITEM
DESCRIPTION DESCRIPTION DESCRIPTION
1,5 1,5 1,5
68
68
91
91
68
91
11,5
11,5
11,5
100 100100 *Packaging: 10 pieces,
M6 17 17 17 complete with fixing screws.
63
ØDP
WITHOUT
33 Ø 12 Ø 14 Ø 16
ROD
ITEM DESCRIPTION
CL-H8716M-P CL-H8716M-P12100M CL-H8716M-P14100M CL-H8716M-P16100M 50
WITHOUT
Ø
Ø 12 Ø 14 Ø 16
ROD
ITEM DESCRIPTION
CL-H8716M-SS CL-H8716M-SS12100M CL-H8716M-SS14100M CL-H8716M-SS16100M
31
Revision 001
22 110
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
51703a
App
als
cat
M at
e ri
io n
li
19 5,5
140
Material: Polyethylene PE 1000.
Characteristics:
– Profile can be bent or calendered by means of usual systems. ITEM DESCRIPTION
– Coefficient of linear expansion: 2.5 x 10 -4.
40
– Temperature range for continuous use in air: -35°C / +70°C. PE-1000 PE-1000
BLACK LIGHT BLUE
22
Characteristics: To use this guide, a 60x6 mm steel bar or double VG-H14022M-B-10 VG-H14022M-BL-10 30 m 3m
M-Profile should be inserted.
This profile is also suitable with our clamping systems. For more information, go to SmartGuide® catalog page: 5 1 6 9 0 a
9 11 Screw M8
5
82
Ø
1,5
90
82
Ø
31
100
100
30
50 20 22
60 30
60
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 1 7 1 0 a PRODUCT GUIDES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
For index side
on
guides, go to: ALL
51710a
App
als
5 1 5 1 0 a cat
M at
e ri
io n
li
UHMWPE BLACK
ITEM DESCRIPTION
2,5 8,5 3
R2,5
40,5
25
50
80
68
VG-P840DBM-B-10 3m 30 m 0,55
R6
R6
11
23
19
VG-DB83M-B-10 3m 30 m 0,72
6
83
90°
10 15 0.5 VG-P10MRD-B-100 VG-P10MRD-100 30m 0,056
Ød
not included
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 1 7 1 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
ucti
5 1 5 1 0 a
Maint
on
ALL
51720a
App
als
cat
M at
e ri
io n
li
Helps guide PET and HDPE containers in high speed, air conveying applications. Nolu-SR™ is
made with a proprietary alloy of reinforced UHMWPE and other USDA accepted lubricants,
resulting in a harder, lower friction material that is ideal in these applications. Though designs
differ, the choice should be Nolu-SR, proven to increase throughput, reduce jams and wear
longer.
Material: Nolu-SR is made with a special UHMWPE with modified molecular structure that
helps guide PET containers in high speed applications.
Nolu-SX™ have the same characteristics as Nolu-SR, but with reduced thermal expansion (up
to 40%)
ITEM DESCRIPTION
8,4 2,1
R 3,2
2 - 2,4
0,8
5 0 6 5 0 a
4,2
3,3
VG-NG47-SR-100 30 m 30 m
8
11,9
12,6 6,5
1,9 -2,3
VG-NG49-SX-100 30 m 30 m
6,1
2,5
12,6 6,4
1,9 - 2,3
VG-NG50-SX-100 30 m 30 m
6,1
2,5
19,4
11,7
30 m 30 m
2,3
VG-NG81-SX-100
3,3
8,4
23
9,7
6,1
VG-NG91-SR-100 30 m 30 m
9,9
2,4 4,8
27,9
10,9
5,1
VG-NG110-SR-100 30 m 30 m
9,9
2,2 5,1
32
8,1
5
VG-NG125-SX-100 30 m 30 m
9,9
Revision 001
3 5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
Aluminum guide rail with Nolu-S™ insert is used to guide containers , especially nanc nstr
ucti
Maint
PET and HDPE, in application such as air conveying. Many air conveyor users and NG49 NG125
on
manufacturers have found that brush guides tend to get contaminated with debris, ALL
51730a
App
als
which causes increased friction and marking of PET bottles. Nolu-S have the perfect cat
M at
e ri
io n
li
combination of extremely low friction in a tough UHMWPE based material.
PBG5
NOLU-S will not mark bottles while allowing faster speeds and
greater throughput.
VG-011-04
VG-011-01
PBG5
For clamps, go to:
5 1 5 1 0 a
NOLU-S™
ALUMINIUM NOLU-S™
ANTISTATIC
ITEM DESCRIPTION
20
VG-ABG-10 - - 3m - 30 m 0.50
17
VG-ABG-20 - - 6m - 60 m 0.50
12
17
- VG-PBG7-NS-100 - - 30 m 30 m 0.10
6,5
4,5
6,4
17
6,5
- - VG-PBG7-NSD-100 - 30 m 30 m 0.10
4,5
6,4
NOLU-S™
NOLU-SR™ neck guides and NOLU-S body guides, with
an ultra low coefficient of friction, reduces the degree of
bottle tilt and the corresponding wear problems.
OTHER GUIDES
Other guides (especially brushes), when contaminated,
can cause irregular tilt and orientation of the bottles,
resulting in blockage at curves or inclines.
12,5
VG-ABG2-10 - - 3m - 30 m
13,6
0.50
17
VG-ABG2-20 - - 6m - 60 m
14
3,5
R2
4
12,5
17
2÷3
Revision 001
26
3
16,5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
51740a
App
als
M8 cat
M at
e ri
io n
li
continue
51740b
** HMWPE
A UHMWPE WHITE ANODIZED ALUMINIUM
WHITE
ITEM DESCRIPTION
12
- - VG-A600A-10 3m 30 m
-
11,7
8,4
20
- - VG-A600A-20 6m 60 m
2,5 - VG-P813-10 3m - 30 m
-
VG-P813-W-20 VG-P813-20 - 6m - 60 m
20
-
6,5 - VG-P813-100 - 30 m 30m
- VG-P813F-10 3m - 30 m
-
20 - VG-P813F-20 - 6m - 60 m
-
2,5 - VG-P813F-100 - 30 m 30m
- VG-P816F-10 - 3m 30 m
A A 25 -
- VG-P816F-20 - 6m 60 m
6,5
- VG-P822F-10 - 3m 30 m
35 -
- VG-P822F-20 - 6m 60 m
- VG-P834F-10 - 3m 30 m
53 -
Revision 001
- VG-P834F-20 - 6m 60 m
continue
51740b
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
e
For index side
ucti
Maint
on
guides, go to: ALL
51740b
App
als
5 1 5 1 0 a cat
M at
e ri
io n
li
back
51740a
M8
ITEM DESCRIPTION
- VG-A2520-10 3m 30 m
31
50
9
- VG-A2520-20 6m 60 m
6
12
2,5
VG-P2520BC-10 - 3m 30 m
51
57
VG-P2520BC-20 - 6m 60 n
6,5
Revision 001
back
51740a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
For SpeedsetTM
on
ALL
51810a
brackets, go to:
App
als
cat
M at
e ri
io n
li
5 3 5 9 5 a
EL
EL
LL
LL
RA
RA
PA
PA
BE
BE
T
T
US
US
M
M
S
S
N
N
PI
PI
l
lle
l
lle
ra
ra
pa
pa
e
tb
e
tb
us
us
m
m
ns
ns
Pi
Pi
Loosen the brackets knob, slide the pins BRACKET SPACERS FOR ROD USE
into position, then re-tighten the bracket knobs. Spacers may be required for proper set back of the brackets to allow for the
jointed adjusting rod clevis extension.
ITEM DESCRIPTION
54
27,5 12,5 VG-222JQ-M8 M8 M8
Ø16
Ø19
10
e Co
nanc nstr
ucti
Maint
on
ALL
51820a
App
als
cat
M at
e ri
io n
li
ADJUSTABLE GUIDE RAIL CLAMP
Material: clamp in PA, bolts in stainless steel nuts in nickel plated brass.
Supply: assembled.
ITEM DESCRIPTION
CL-CON-R 10
“OPEN” POSITION
“OPEN” POSITION
25,1
40
40
237
for conical side guides
60 max 35 43 max 35 60
“CLOSED” POSITION
“CLOSED” POSITION
25,1
40
200
200
Use for profile:
for conical side guides
VG-LSSR.. go to:
5 1 5 2 0 a
LSST rail
ing
slid
203 VG-113SM-08G 2
Revision 001
VG-113SM-08G
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 1 8 3 0 a ADJUSTING RODS
www.SystemPlastSmartGuide.com
e
7
ucti
Maint
on
ALL
51830a
App
als
cat
M at
e ri
io n
li
L Ø7,5 7,5
Ø 3 10 Ø
ØD
Ød
L L
FOR ROD Ø 12 FOR ROD Ø 14 FOR ROD Ø 16 FOR ROD Ø 12 FOR ROD Ø 14
ØD ØD
ITEM DESCRIPTION ITEM DESCRIPTION
9,5 12 PG395-D12M110 PG395-D14M110 PG395-D16M110 110 P-D12M200 P-D14M200 200 50
9,5 12 PG395-D12M160 - - 160 50
11,5 13,5 - PG3115-D14M110 PG3115-D16M110 110
Ø L1 Ø 20
MØ
L M10 L
Ø 10 6 Ø 22
10
5
Ø12 Ø14 Ø9
L
L
USE WITH CODE: CL-RD20-P USE WITH CODE: CL-H45S, CL-1040S, CL-1020S.
FOR ROD Ø 14 FOR ROD Ø 16 FOR ROD Ø 12
LATERAL CENTRAL
For
flat bar
40X8
Loose modules
5 2 5 7 0 a 5 2 5 7 1 a 5 2 5 7 2 a 5 2 5 9 2 a
For
flat bar
40X10 Loose Modules
5 2 5 9 0 a
5 2 6 1 2 a
Aluminium 5 2 6 1 1 a Aluminium5 2 6 1 3 a
ACCESSORIES PVC 5 2 6 1 0 a PVC 5 2 6 1 0 a
Loose profiles
5 2 6 5 0 a
Loose rollers
5 2 6 8 0 a
5 2 5 9 4 a 5 2 6 1 4 a
Information about this product is only available on our Smart Guide® website.
5 2 6 7 0 a 5 2 6 7 1 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
9
nanc nstr
Material:
ucti
Maint
Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel.
on
245 ALL
52520a
App
als
cat
9
M at
103
121
Standard packaging: 2 completely assembled guides.
e ri
io n
li
Applications: designed for rugged boxes and containers.
245
Note: each segment can be pulled out without removing pins and rollers.
78
96
9
Features:
9
245 3 • Low noise rollers.
71
53
Ø16,5 34
9
3
Ø16,5 34
9
3
Ø16,5 34 L.
5 245
28 9
46
9
3
Ø16,5 34
1m RG-165H46G1000S RG-165H46G1000G
46
4646
46
3m RG-165H46G3000S RG-165H46G3000G
1m RG-165H71G1000S RG-165H71G1000G
71
7171
3m RG-165H71G3000S RG-165H71G3000G
1m RG-165H96G1000S RG-165H96G1000G
96
S/S
9696
3m RG-165H96G3000S RG-165H96G3000G
1m RG-165H121G1000S RG-165H121G1000G
S/S
121
AISI 430F
121
121
3m RG-165H121G3000S RG-165H121G3000G
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
Pins and metal profile see the table.
on
245 ALL
52521a
App
als
Applications: designed for rugged boxes and containers. cat
M at
e ri
io n
li
121
Note: each segment can be pulled out without removing pins and rollers. The
245 design of the side strap provides a position for the clamp without the need for
screws or other fixing methods on the conveyors.
96
Features:
245
• Low6noise rollers.
71
Ø24 6• Excellent
37,5 for accumulation areas.
9
Ø24 4,5
Ø24 37,5 L.
5 245
9
27
45
9
4,5
Ø24 37,5
PROFILE PROFILE
STAINLESS STEEL ZINC PLATED STEEL
HEIGHT ROLLER BLACK
PIN
ROLLER WHITE ANTISTATIC
ROLLER WHITE MATERIAL
ITEM DESCRIPTION
1m RG-240H45W1000S RG-240H45SD1000S RG-240H45W1000G
454545
45
S/S
2m RG-240H95W2000S RG-240H95SD2000S RG-240H95W2000G 5,0
AISI 430F
95
AISI 430F
120
120
57,5
25,5 30
4
24
2
3,5
CLAMP
Ø9
37
30
ITEM DESCRIPTION
Revision 001
Material: e Co
Straps in reinforced polyamide, rollers in acetal resin. nanc nstr
ucti
Maint
Pins and metal profile see the table.
on
ALL
52530a
App
als
Standard packaging: 50 modules. cat
M at
e ri
io n
li
Applications: designed for rugged boxes and containers.
Features:
• Excellent for accumulation areas.
• Easy and quick installation.
76 37,5 • Low noise rollers.
7,5 30 • Long life and smooth operation.
9
LOOSE MODULES
27
45
RADIUS
ROLLER
9
Ø24
WHITE
5
R
R
Cavity between the rail and the roller block provides ITEM DESCRIPTION EXTERNAL INTERNAL
a position for the rail clamp and this design feature
also prevents the lateral movement of the roller R min R min
0,15 POM RG-240H4545W76
blocks without the need for screws or other fixing 600 460
methods.
Note: roll sections can be quickly assembled by simply sliding into the rail. Once assembled and the
rail is located using clamps the sections can not move laterally.
L = 3m 15 3 27,5
27 9
40
45
9
Ø24 5
L = 3m
50,5
ROLLER RADIUS
WHITE
R
R
ITEM DESCRIPTION
EXTERNAL INTERNAL
R min R min
2,75 POM RG-240H4545W3000S
600 460
20
Profile: stainless steel
7,5
The clamp is designed to fit into the slot in the back of a section as indicated 2,5
in the sketch below.
48,5
CLAMP 20 28,5
BLOCKING:
,5
Clamps fix metal profile ITEM DESCRIPTION Ø8
and lateral straps, thus
37,3
CL-1540S 50
sliding. 304
10
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
INTERMEDIARY ROLLER MODULES FOR CURVED SECTIONS nanc nstr
ONE ROLLER • TWO ROLLERS
ucti
Maint
on
ALL
52550a
App
als
cat
M at
e ri
screws in stainless steel. Pins see the table. io n
li
Conductive version: straps in reinforced polyamide, rollers and pins
in acetal resin.
Supply: supplied as single module L. 85 mm. Features:
Standard packaging: 40 modules. • Low noise rollers.
Applications: designed for rugged boxes and containers. • Excellent for accumulation areas.
COMPONENTS: N° 12 PINS • • Long life and smooth operation.
N° 12 ROLLERS • N° 2 STRAPS • Easy and quick installation.
ONE ROLLER MODULE ROLLER GREEN
CL-1020S
27
49
65
21,5 42 21,5 25
85 30
16,5
Ø16.5
9,5
8
19
21,5 42 21,5 25
85 30
ITEM DESCRIPTION
2 17
27
50
70
10
Ø9
23
25
10
27
Ø16,5 30
10
14
L. 20
10
11
2,025 3m POM RGC30-165H96G3000S RGC30-165H96G3000G CLAMP
76
96
53
ITEM
DESCRIP-
TION
Revision 001
25 SS AISI
10
Ø16,5 30 50 CL-1020S
304
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
52570a
App
als
cat
M at
e ri
io n
li
LENGTH
R
ITEM DESCRIPTION PROFILE
R
mm EXTERNAL INTERNAL
46,5
46,5
46,5
46,546,5
43,5
43,5 43,5
43,5
43,5
For
flat bar ROLLER GREEN R min R min
POM 338
300 250
2222
2727
5050
4141
40X8 RG-210H50-840M-G338
27
41
22
50
22
27
50
41
FLEXIBLE MODULES
6 9 Ø21
Material: straps and spacers: 6 6696 99 9Ø21Ø 2121
Ø
Ø21
reinforced polyamide, rollers and pins:
32
POM-acetal, screws: Stainless steel. 32
32
32 32
30
Application: designed for rugged boxes, 3030 ROLLER WHITE
30 30
containers and shrink-wrapped products.
3333 8 8
RG-105H49-840M-W348
8
8
4141
4949
R min R min
41
33
49
POM 348
41
33
8 8 49
300 250
ROLLER GREEN
8
ROLLER WHITE
8
8
RG-105H81-840M-W348
41
41
For
5050
4141
6565
8181
flat bar
R min R min
50
65
41
81
POM 348
50
41
65
81
ROLLER GREEN
8
10,5
8
RG-86H49-840M-W348
8
4949
4141
R min R min
49
33
41
8 8 49
33
41
POM 348
300 250
9
8
ROLLER GREEN
8
31,5
Loose Stainless Steel and Aluminum profiles are 31,5
31,5
31,531,5
30
available. 30 303030
8 8
4141
R min R min
65
50
81
41
POM 348
65
81
50
41
300 250
Revision 001
ROLLER GREEN
8 8
9
8
RG-86H81-840M-V348
8
5 9 17,59 99 9
Information about this product is only
5 5595 17,5 17,5
99 917,5
17,5
available on our Smart Guide® website.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
52571a
App
als
cat
M at
e ri
io n
li
LENGTH
R
ITEM DESCRIPTION PROFILE
R
mm EXTERNAL INTERNAL
43,5
43,5
43,543,5
3
3
27
50
3 3 2727
50
ROLLER GREEN
27
50
R min R min
50 POM 3000
27
50 RG-210H50-840M-G3000S 300 250
9 Ø21
9 Ø21
9 946,5 Ø21Ø21
46,5
46,546,5
32
32
3032
32 ROLLER WHITE
88 88
30
30 30
8
POM 3000
3333
49
300 250
33
49
ROLLER WHITE
8
3 RG-105H81-840M-W3000S
3
3 3
81
65
81
6565
R min R min
81
65
POM 3000
81
81
65
300 250
ROLLER GREEN
88 88
8
Ø10,5 RG-105H81-840M-G3000S
For loose modules go to page code: Ø10,5
32 Ø10,5
Ø10,5
32
32
5 2 5 7 0 a 32
31,5
31,5
31,5
30
31,5
30
30 30
33 88 8
3 ROLLER WHITE
8
3
3349 8
3 3 RG-86H49-840M-W3000S
3333
49
41
41
49
R min R min
49
For
88 88 33
8 49
POM 3000
flat bar 300 250
40X8 Ø9
Ø9 ROLLER GREEN
11 9 5 9 18 Ø9
5 9 18 Ø9 RG-86H49-840M-G3000S
5 5 9 918 18
30
30
30 30
Roller guide modules can also be supplied in lengths
88 88
8
R min R min
POM 3000
300 250
88 88
8
Ø9 ROLLER GREEN
Ø9
Revision 001
31,5 Ø9 Ø9 RG-86H81-840M-G3000S
31,5
Aluminum 31,531,5
5 2 5 7 2 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
52572a
App
LENGTH
als
cat
R
M at
e ri
io n ITEM DESCRIPTION PROFILE
li
R
mm EXTERNAL INTERNAL
46,5
46,5
46,5
43,5
43,5
43,5
46,5
43,5
50
50
50
50 50
POM
ROLLER GREEN 3000
R min R min
RG-210H50-840M-G3000A 300 250
Ø21
Ø21
Ø 21
61,5
61,5
61,5 Ø21
61,5
48
48
4832
32
32
48
30
30
3032 ROLLER WHITE
For clamps, go to: 30 RG-105H49-840M-W3000A
33 8888
5 1 5 1 0 a
498
49
R min R min
33
49
33
49
8 8 33 33
POM 3000
300 250
ASSEMBLED ROLLERGUIDES
49
888
RG-105H81-840M-W3000A
R min R min
POM 3000
65
81
65
81
65
81
300 250
65 65
81 81
ROLLER GREEN
RG-105H81-840M-G3000A
888
8 8
Ø10,5
For loose modules go to page code: 48 Ø10,5
Ø 10,5
48
48
Ø10,5
5 2 5 7 0 a 48
31,5
31,5
31,5
30
30
30
31,5 ROLLER WHITE
888
30
8 8 33 33498 8
RG-86H49-840M-W3000A
41
33
33
49
33
49
49
R min R min
POM 3000
For 300 250
49
flat bar
888
Go to: www.SystemPlastSmartGuide.com
8 8
RG-86H81-840M-W3000A
page code:
R min R min
65
65 6581
POM 3000
65
81
65
81
81
300 250
81
ROLLER GREEN
888
RG-86H81-840M-G3000A
8 8
Revision 001
Stainless steel Ø9
48
48 Ø99
Ø
48
5 2 5 7 1 a 48
Ø9
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 2 5 9 0 a ROLLER GUIDES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
46,5
46,5
on
ALL
52590a
43,5
43,5
App
als
cat
M at
e ri
io n
li
41
22
27
50
41
22
27
50
LENGTH
R
ITEM DESCRIPTION MODULE
R
55 11
11 mm EXTERNAL INTERNAL
32
32
For 30
30 ROLLER WHITE
flat bar
RG-105H49-1040M-W348
40X10 88
FLEXIBLE MODULES
R min R min
41
33
49
POM 348
41
33
49
300 250
Material: straps and spacers:
reinforced polyamide, rollers and pins:
88
ROLLER GREEN
POM-acetal, screws: Stainless steel.
Ø10,5
Ø 10,5 RG-105H49-1040M-V348
Application: designed for rugged boxes,
33 11
11 18
18
containers and shrink-wrapped products.
31,5
31,5
30
30 ROLLER WHITE
RG-86H49-1040M-W348
88
33
49
41
33
49
POM 348
page: 300 250
5 2 5 7 0 a
88
ROLLER GREEN
Ø99
Ø
RG-86H49-1040M-V348
33 11
11 17,5
17,5
41
41
For
flat bar
40X8
11 9
3 0 1 1 0 a
Example:This roller guide is use with the 2120 LBP belt
5 2 6 5 0 a
Revision 001
Information about this product is only available on our Smart Guide® website.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
52592a
App
als
cat
M at
e ri
io n
li
Roller guide
modules 33 mm, go to:
5 2 5 9 3 a
33
For LENGTH
R
flat bar ITEM DESCRIPTION MODULE
R
40X8 mm EXTERNAL INTERNAL
290 POM
200 220
8
Features:
- Improve design
33
49
RGC20-105H49-840M-G290
15,5
- Reduced dimensions 19,5
- Low noise rollers
- Excellent for accumulation areas
- Long life and smooth operation 8
- Easy and quick installation on flat metal profile 40X8
ROLLER WHITE
RGC18-86H49-840M-W290
54
40
R min R min
290 POM
8
300 250
5 2 5 7 0 a
33
49
ROLLER GREEN
8
15.5 RGC18-86H49-840M-G290
18
41
For
flat bar
40X8
9
L= 3m / 6m
L= 3m / 6m
SHOE
For M Profile stainless steel
VG-S840...,
26 ITEM DESCRIPTION go to page code:
5 2 5 6 0 a
Revision 001
15,5
SHOE-49L26 PA
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
52593a
App
als
cat
M at
e ri
io n
li
Roller guide
modules 19,5 mm, go to:
5 2 5 9 2 a
19.5
For
flat bar LENGTH
R
40X8 ITEM DESCRIPTION MODULE
R
mm EXTERNAL INTERNAL
54
R min R min
Features: 290 POM
103
330 330
- Improve design
8
ROLLER WHITE
RGC32-86H49-840M-W290
40
54
R min R min
290 POM
8
330 330
5 2 5 7 0 a
33
49
ROLLER GREEN
8
29 RGC32-86H49-840M-G290
31,5
41
For
flat bar
40X8
9
L= 3m / 6m
SHOE L= 3m / 6m
5 2 5 6 0 a
Revision 001
SHOE-49L42 PA
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
52594a
App
als
cat
M at
e ri
io n
li
Application: Application:
L= 3m central guide lateral guide
M8 M8
Ø 10,5 Ø 8,6
11,5
81
56
32,5
M8
15.2 11.5
22,5 3 11,5
27 19
Ø 10,5 Ø 8,6 36,1
52
ROLLER ROLLER
TYPE WHITE GREEN
ITEM DESCRIPTION
Bending radius:
RG-105H52-5210M-W3000S RG-105H52-5210M-G3000S min 750 mm
2,05
RG-86H52-5210M-W3000S RG-86H52-5210M-G3000S
15,2
M8 M8
25,5
Ø9
M8
Ø
51
56
14/15
14
25,5
23
81
Ø8
35.7
35,7
30
Ø12
30
3
27 22,5
26,7 26.7 110
CLAMP FOR CENTER GUIDES CLAMP WITH SWIVEL ROD FOR LATERAL GUIDES
Material: Stainless Steel (AISI 304) Material: Stainless Steel (AISI 304)
WITHOUT ROD ROD Ø 12
ITEM DESCRIPTION
ITEM DESCRIPTION
Revision 001
ucti
Maint
on
ALL
52610a
App
als
FLEXIBLE SPEEDRAIL™ cat
M at
e ri
io n
li
Material: profile: PVC, rollers: in acetal resin, screws: stainless steel.
Operating temperature range: -10°F to + 180°F
Features:
• Bend by hand to create corners or S-curves easily.
• Can be twisted to help invert containers.
• Saves time and labor associated with machine bending.
• Compatible with other Valu Guide components. Patent N°.
• Available with beads or roller. 6, 516, 933
7, 147, 098, B2
These
roller guides can be curved.
Min. radius in either direction: 460 mm
.75M
12,5
2 pcs.
37
48
21,5
11,5
2 pcs.
VG-688FLEX-1.4-3M 3m (6 screws M8, Item description: VG-1568M-02,
5 2 6 1 3 a
37
48
14
e Co
ALUMINIUM SPEEDRAIL™ nanc nstr
ucti
Maint
Material:
on
ALL
52611a
App
als
screws: stainless steel cat
M at
e ri
io n
li
Features:
• Easy mounting
• Great for polywrapped containers or PET
• Can be curved on site
• Can be cut to desired length without disassembly
• FDA approved engineered polymer
Patent N°.
Also available with
flexible PVC go to: 5 2 6 1 0 a 6, 516, 933
6, 991, 086, B2
37
LENGTH 3m
15,7 ITEM DESCRIPTION VG-686A-1.25-3M
95
LENGTH 3m
32,5
44,5
37
72 72 55
LENGTH 3m ITEM DESCRIPTION:
37
48
SHOE-94L42
18
48
48
2 pcs. (6 screws M8,
STANDARD Item description: 15 15
14
94
18
PACKAGING: VG-1568M-02, 42 30 25 30
22 included with each section) 15
22
5
6,1
6,1
SIDE PLOW FOR ENTRY 42 30
72 55
SCREW: Stainless steel
10
ITEM DESCRIPTION:
18
18
48
48
15 SHOE-48L42
15
687 SP
94
42 30 25 30
Connecting pins ITEM
MATERIAL DESCRIPTION
22
22
25
6,1
6,1
VG-687SP
ITEM DESCRIPTION: Ø 3 mm
SHOE-48L25
55
1568M - T-head screws M8
ITEM
MATERIAL
18
18
48
48
DESCRIPTION
15 15
25 30 VG-1568M-01 16
22
22
Revision 001
VG-1568M-02 19 10
6,1
6,1
M8 VG-1568M-04 32
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
profile: anodized aluminum, rollers: acetal, ALL
52612a
App
als
cat
M at
e ri
Features: io n
li
Patent N°.
• Easy mounting 6, 516, 933
• Great for polywrapped containers or PET 6, 991, 086, B2
• Can be curved on site
• Can be cut to desired length without disassembly
• FDA approved engineered polymer
Ø11.5
These
roller guides can be curved. 1
1.5
Min. radius in either direction: 610 mm
29
ITEM DESCRIPTION VG-687-1.4-3M 25 ITEM DESCRIPTION VG-687-3.3-3M
25 74
12
6
LENGTH 3m
18 LENGTH 3m
47,1
37
6,5 36
55
37
101
84
50 24
2 pcs. (6 screws M8, Item 2 pcs. (6 screws M8, Item
37
12,5
2,3
25
NOSE PLOW FOR CENTER GUIDES NOSE PLOW FOR CENTER GUIDES
Item description
VG-687NP-1.4M
21 M8 687 LDB
Lane divider bracket
8,2
ITEM
687 SP connecting pins, 25 50 MATERIAL
4,1
DESCRIPTION
go to:
30
21
Revision 001
5 2 6 1 1 a Ø 3 mm 20
73 n°2 VG-687LDB-M8
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
e
ALUMINIUM SPEEDRAIL™
ucti
Maint
on
ALL
52613a
App
Material:
als
cat
M at
e ri
io n
li
profile: anodized aluminum, rollers: acetal,
Patent N°.
screws: stainless steel 6, 516, 933
Features: 6, 991, 086, B2
• Easy mounting
• Great for polywrapped containers or PET
• Can be curved on site
• Can be cut to desired length without disassembly
• FDA approved engineered polymer
These
roller guides can be curved.
Min. radius in either direction: 305 mm
95
5 2 6 1 0 a
Side plow for entry, Side plow for adjustment, Side plow for entry,
go to: go to: go to:
5 2 6 1 1 a 5 2 6 1 1 a 5 2 6 1 1 a
e Co
nanc nstr
ucti
Maint
on
ALUMINIUM SPEEDRAIL™ ALL
52614a
App
als
cat
M at
e ri
Material: io n
li
profile: anodized aluminum, rollers: acetal, Patent N°.
screws: stainless steel 6, 516, 933
6, 991, 086, B2
Features:
• Easy mounting
• Great for polywrapped containers or PET
• Can be curved on site
• Can be cut to desired length without disassembly
• FDA approved engineered polymer
These
roller guides can be curved.
Min. radius in either direction: 610 mm
28
ITEM DESCRIPTION VG-688-1.4-3M 25 ITEM DESCRIPTION VG-688-3.3-3M
25
LENGTH 3m LENGTH 3m
37
55
37
101
84
Nose plow,
Nose plow, go to:
for center guides,go to:
5 2 6 1 2 a 5 2 6 1 2 a
21 M8
5 2 6 1 1 a 5 2 6 1 2 a
30
21
73
20
Ø 3 mm
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
52650a
App
als
cat
M at
e ri
io n
li
ITEM DESCRIPTION
8
VG-A840M-10 3m 30 m
11,5
17
40
11,5
5
VG-A840M-20 6m 30 m
30
5 0 5 6 0 a
For clamps, go to:
5 1 5 1 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
A
ucti
Maint
37
on
ALL
52670a
17,5 B 17,5
1,3
Ø11
App
als
cat
M at
e ri
io n
li
20
R75
11,5
M6
6,8
11,6
Type:
VERSION WITH 3 ROLLERS B = Center distance of fasteners
MR Multi rollers, suitable for irregular shaped products
50
1,4
SR Plastic rollers with noise reducing characteristics Ø11
SSA Plastic rollers with micro ball bearings for ultra low
20
coefficient of friction R75
11,5
M6
9,5 Min
23,5 15 Max
Ø11
20
R75
Material:
11,5
MR SR SSA MR SR SSA
e Co
nanc nstr
ucti
Maint
on
ALL
52671a
App
als
Type: cat
M at
e ri
io n
li
SR Plastic rollers with noise reducing characteristics
SSA Plastic rollers with micro ball bearings for ultra low coefficient of friction
1,5
3,8
22
5
R7
17,5
M8
included 11,3
22
17,5
M8
included 19,5
50
Ø 11,3 13 6,5
3,8
22
M8
17,5
included
Material:
6” VERSION 9” VERSION
Body: Acetal thermoplastic resin
Rollers: Acetal (type SSA), Thermoplastic resin with noise reducing Roller type: A=154 - S=3 Roller type: A=225 - S=1.5
characteristics (type SR)
Pins, hardware and micro ball bearings (SSA only): Stainless steel SR SSA SR SSA
Fastener
TMC-K600R3SR-FM TMC-K600R3SSA-FM TMC-K900R3SR-FM TMC-K900R3SSA-FM
M8
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
52680a
App
als
cat
M at
e ri
io n
li
Ø10,5
Ø16,5
Ø6,3
Ø4,5
Ø6,5
Ø9
0,5x45° 7 8,5
2,75 9 13,75
16
25,5
Ø6,3
Ø10
Ø24
Ø21
Ø9
32,5
Ø8,6
Ø4,2
Ø6,5
32,5 64,5
Ø8,6
Ø8,6
Ø4,2
Ø4,2
Ø6,5
Ø6,5
64,5
ROLLER WHITE ROLLER GREEN ROLLER WHITE ROLLER GREEN
Ø8,6
Ø4,2
A
B PAGE CODE
TYPE 1 TYPE 2 TYPE 1 TYPE 2
35 - 31 5 3 5 5 5 a
B B - 61 38,5 5 3 5 6 0 a
A A 65 - 30 5 3 5 5 5 a 5 3 5 5 5 a
66 - 30,5 5 3 5 1 5 a
SIDE GUIDE BRACKETS
STAINLESS STEEL
- 78,5 30 5 3 5 5 5 a
- 89 38,5 5 3 5 6 0 a
A
TYPE 1 TYPE 2 B PAGE CODE 5 3 5 6 5 a
TYPE 1 TYPE 2
69 - 31 5 3 5 2 5 a MOUNTING TOP
A A
B B
77 70 43 5 3 5 3 5 a
- 69 44 5 3 5 4 5 a
5 3 5 8 5 a
LATERAL BRACKETS ANGLE BRACKETS ANGLE BRACKETS SPEEDSET™ GUIDE DRIP TRAY PHOTOCELL CLAMP
STAINLESS STEEL THERMOPLASTIC STAINLESS STEEL RAIL ADJUSTMENT BRACKETS ASSEMBLY
5 3 5 7 0 a 5 3 5 7 5 a 5 3 5 8 0 a 5 3 5 9 5 a 5 3 6 0 0 a 5 3 6 0 5 a
CLAMP FOR
CROSS BLOCKS T CLAMPS QUICK RELEASE CROSS BLOCK
PHOTOCELLS
e Co
nanc nstr
ucti
Maint
on
ALL
53515a
App
als
cat
M at
e ri
io n
li
50 45
39
2
Ø
4,5 30,5
66
195
154
4
57
71
K 9
8
40 62,5
15
K Ø 12 Ø 14
MATERIAL mm
ITEM DESCRIPTION
9 BKF-66W31L-90P12 BKF-66W31L-90P14
PA-FG 50
10,5 BKF-66W31L-105P12 BKF-66W31L-105P14
5 3 6 0 0 a 5 3 5 1 5 b
8,5
44
8,5
5,8
8,5 5858 8,5
11
58
75
85
57
Material: reinforced polyamide, eyebolt and washer in stainless steel AISI 304, knob 11 11 11
in polyamide with nickel plated brass insert.
8,5
5,8
55 5
5
5050
4444
50
05
15
51 4,5 15
4,5 15
Without
SP-7550T15 50
lip
PA-FG
Revision 001
With
SP-7550T15L 50
lip
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
rt
stainless steel AISI 304, knob in polyamide with nickel
ucti
his
Maint
on
plated brass insert. ALL
53515b
typ e of
Note: max recommended tightening torque 40Nm.
App
als
cat
M at
e ri
io n
li
b
ra
cke
t
50
VERSION WITH PLASTIC KNOB
SLOT K Ø 12 Ø 14
40
ITEM DESCRIPTION
Ø
9 BKF-66W31L-90P12E BKF-66W31L-90P14E 50
30,5
66
196
5 3 6 0 0 a
K
40
50
VERSION WITH HIGH KNOB
SLOT K Ø 12 Ø 14
56
ITEM DESCRIPTION
2
9 50
Ø
BKF-66W31L-90P12H BKF-66W31L-90P14H
30,5
212
66
5 3 6 0 0 a
This bracket is suitable for use in For other type of For spacer for brackets
combination with brackets with rotating top. brackets, go to: go to:
Revision 001
5 3 5 2 5 a 5 3 5 1 5 a 5 3 5 1 5 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
50 51
on
ALL
53525a
App
als
cat
M at
e ri
io n
li
Ø
40
204
65
45
71
44 71 5 3 6 0 0 a
STAINLESS STEEL
PLASTIC AISI 304
Ø 12 Ø 14 Ø 16 Ø 20 Ø 12 Ø 14 Ø 16
ITEM DESCRIPTION
BKF-79W30-P14
This bracket is suitable for use in combination
with brackets with fixed top.
5 3 5 1 5 a 30
SP-10049T15L
For spacer for brackets
Adjustable bracket go to:
Material: reinforced polyamide, eyebolt and washer in 5 3 5 1 5 a SP-10049T15
stainless steel AISI 304, knob in polyamide with nickel plated
brass insert.
Revision 001
e Co
Material: reinforced polyamide, eyebolt and washer in nanc nstr
stainless steel AISI 304, knob in polyamide with nickel
ucti
Maint
on
plated brass insert. ALL
53525b
App
als
cat
M at
Ø
e ri
io n
li
69
Ø 12 Ø 14 Ø 16
ITEM DESCRIPTION
Ø 12
ITEM DESCRIPTION
BKR-84W31LP-P12B 50
87
ITEM DESCRIPTION
31 40
40 Ø30
2,5
Ø11
5 3 5 2 5 a
MATERIAL ITEM DESCRIPTION
120
PA-FG BK-49W31L 50
go to:
5 3 5 2 5 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ACCESSORIES ALL
53535a
App
als
cat
M at
e ri
io n
li
50 64 64 BKF-79W30-P14
10/15
SP-R36T10
30
43
22,5
22,5
Ø
SP-10049T15L
40
SP-10049T15
43 4,5
72
72
234
15 15
5
150
150
100
95
69,5
43 85 85
55
10
15
100
90
90
80
PLASTIC
5
Ø 12 Ø 14 Ø 16 Ø 20 10,5
3,5 15 3,5 15
PLASTIC ITEM DESCRIPTION 18,5
Without
lip BKR-72W43P-P12 BKR-72W43P-P14 BKR-72W43P-P16
* BKR-72W43P-P20
ITEM
TYPE MATERIAL DESCRIPTION
With
lip BKR-77W43LP-P12 BKR-77W43LP-P14 BKR-77W43LP-P16 * BKR-77W43LP-P20 Without
SP-10049T15 50
STAINLESS STEEL AISI 304 ITEM DESCRIPTION lip
PA-FG
Without With
lip BKR-72W43S-P12 BKR-72W43S-P14 BKR-72W43S-P16
* - lip
SP-10049T15L 50
With
lip BKR-77W43LS-P12 BKR-77W43LS-P14 BKR-77W43LS-P16 * -
SPACER FOR ADJUSTABLE
HEADS IN PA-FG
brackets, go to:
Note: screw regulates rod position and head adjustability. 10 SP-R36T10
100
Max recommended tightening torque 4 Kgm. 5 3 5 3 5 b 15 SP-R36T15
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
Material: reinforced polyamide, eyebolt and washer in nanc nstr
stainless steel AISI 304, knob in polyamide with nickel
ucti
Maint
on
plated brass insert. ALL
53535b
App
als
cat
M at
e ri
22,5
io n
li
40
VERSION WITH CLOSED TOP
70
Ø 12 Ø 14 Ø 16
ITEM DESCRIPTION
194
40
Ø 12
88
ITEM DESCRIPTION
212
Ø 12 Ø 14 Ø 16
88
252
ITEM DESCRIPTION
Ø30
Ø30
40
5 3 5 3 5 a
Without lip BK-50W43 50
For spacer for brackets,
PA-FG
go to:
Revision 001
e Co
nanc nstr
ucti
Maint
50 64
on
ALL
53545a
App
als
cat
M at
e ri
ACCESSORIES io n
li
Ø
BKF-79W30-P14
30
40 44
69
22,5
240
SP-10944T15L
SP-10944T15
159
109
80
15 15
K 32
16,5
44 82
PLASTIC
Ø 12 Ø 14 Ø 16
18,5 44
5,5
2 28 2
7,5
5
Slot K
BKR-69W44P-85P12 BKR-69W44P-85P14 BKR-69W44P-85P16
8,5
103,5
112
Slot K
87
85
109
91
5
10,5 15
Slot K 3,5 15 10,5
10,5
ADJUSTABLE BRACKET
Material: bracket and adjustable head in reinforced To view spacer for adjustable heads in
polyamide; eyebolt, nut, screws and washer in stainless steel AISI 304; knob PA-FG, go to:
in polyamide PA-FG with nickel plated brass insert.
5 3 5 3 5 a
Revision 001
ucti
Maint
on
ALL
45
53545b
App
als
cat
M at
e ri
io n
li
67
Ø 12 Ø 14 Ø 16
SLOT K
ITEM DESCRIPTION
8,5 BKR-67W44P-85P12B BKR-67W44P-85P14B BKR-67W44P-85P16B
50
10,5 BKR-67W44P-105P12B BKR-67W44P-105P14B BKR-67W44P-105P16B
Ø
62
40
85
218
K
Suitable for drip tray brackets;
go to:
50 5 3 6 0 0 a
Ø
40
85
40
258
PA-FG 50
K 10,5 BK-47W44-105 5 3 5 4 5 a
16,5
44
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
74 62 e Co
nanc nstr
37,3
ucti
Maint
on
Ø 22 ALL
53555a
App
als
Ø 12 Ø 14 cat
M at
e ri
io n
li
MATERIAL
ITEM DESCRIPTION
87
PA-FG BKE-85W22-P12 BKE-85W22-P14 50
197
180
10
go to:
48
72
12
24,5
5 3 6 0 0 a
Ø8,8 11
41
50 45
2
Ø 12
Ø
MATERIAL
171
ITEM DESCRIPTION
60
6 30
130
PA-FG BKF-65W30L-P12 50
45 5
20
Ø11,5 8
40 60
50 45
Ø 12 Ø 14
MATERIAL
ITEM DESCRIPTION
2
4,5 31
Ø
4
123
go to:
5 3 6 0 0 a
9 8
14
40 62
50 51
30
79
Ø 12 Ø 16
112
MATERIAL
ITEM DESCRIPTION go to:
5 3 5 4 5 a
Revision 001
8
e Co
nanc nstr
ucti
Maint
on
ALL
53560a
App
als
cat
M at
e ri
io n
li
52
50
41
Ø
54
38
61
61
180
164
84
K 7
5
40 65
WITH HIGH KNOB
Suitable for drip tray brackets Ø 12 Ø 12
SLOT K SLOT K
go to: ITEM DESCRIPTION ITEM DESCRIPTION
5 3 6 0 0 a 9 BKF-61W38-90P12
50
9 BKF-61W38-90P12H
50
10,5 BKF-61W38-105P12 10,5 BKF-61W38-105P12H
50
50 52
54
41
Ø
38
89
89
187,5
204
9,5
84
K 7
5
40 65
Suitable for drip tray brackets
go to:
BRACKET WITH EYEBOLT
AND KNOB 5 3 6 0 0 a
Material: reinforced polyamide, eyebolt WITH HIGH KNOB
and washer in stainless steel AISI 304, Ø 12 Ø 12
knob in polyamide with nickel plated SLOT K SLOT K
ITEM DESCRIPTION ITEM DESCRIPTION
brass insert.
Revision 001
e Co
nanc nstr
ucti
Maint
* Suitable with
on
ALL
Ø
53565a
Speedset™ adjustment:
App
als
cat
M at
n!
e ri
K
esig
5 3 5 9 5 a io n
li
d D acer.
nde r sp
Exteneed fo
64
No
3 10,4
161
47
75
W 35
Ø 12-13 Ø 14 Ø 16 Ø 20
W K
ITEM DESCRIPTION
Ø
Note: Versatile, sanitary design, high temperature or corrosive
10,4 environments, tall or short, fixed or swivel.
150
47
75
73 35
Ø 12-13 Ø 14 Ø 16 Ø 20
ITEM DESCRIPTION
47
97
10,4
225
107
84
87 38
Ø 12-13 Ø 14 Ø 16 Ø 20
ITEM DESCRIPTION
Revision 001
e Co
nanc nstr
e
For plastic version, go to:
ucti
Maint
on
ALL
53570a
5 3 6 2 5 a
App
als
cat
M at
e ri
io n
li
STAINLESS STEEL GUIDE RAIL BRACKETS
29 2923 23 23 23
Ø 12-13
M6
M6
ITEM DESCRIPTION
102
102
102
102
51
51
76
76
64
64
VG-254K-S-12 10
31 31
10 3
10 3 3 3
40 40 40 40
32 3239 39 39 39
M6
127M6
Ø 12-13 Ø 16
100
127
100
127
127
75
75
50
50
ITEM DESCRIPTION
VG-253K-S-12 VG-253K-S-58 10 31 31
10 3,5
10 3,5 3,5 3,5
55 55 55 55
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
POLYAMIDE BRACKETS
ucti
Maint
on
ALL
53575a
App
als
cat
M at
e ri
io n
li
12,5
8,3 10
12,5
8,3 10
48
17
115
150
14
75
48
14
40
8,3
40
40
8,3
58 12,5
40
92
58 12,5
ITEM DESCRIPTION ITEM DESCRIPTION 92
VG-245-H-BK 10 VG-245-J-BK 10
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
53580a
App
als
cat
M at
e ri
io n
li
39
50
140
26
37
19 33,5
28
30
33,5 19
70
30
15
28
3
15
3
28 30 12 28 30 12
18
18
11
11
40
40
11
11
70 70
ITEM
MATERIAL MATERIAL ITEM DESCRIPTION
DESCRIPTION
STAINLESS STAINLESS
WITHOUT LIP STEEL BKL-140L70-SS 50 WITHOUT LIP STEEL BKL-70L70-SS 50
AISI 304 AISI 304
51
43 43
FIXED BRACKET
18
8
77,5
154
77,5
55,5
78
45
10,5 12
12
Revision 001
STAINLESS
WITHOUT LIP STEEL BKZ-154-SS 50 26
AISI 304 31
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 3 5 8 5 a MOUNTING TOP
www.SystemPlastSmartGuide.com
e Co
Ø36
Ø36 nanc nstr
Ø29,8
ucti
Maint
Ø29,8
on
Ø ALL
53585a
App
als
cat
M at
e ri
io n
li
24
20 25
64
48
2,5
40
2,5
35
M10 M10
Material: reinforced polyamide; eyebolt, nut and washer in stainless Material: head in reinforced polyamide, insert in nickel plated brass, screw
steel AISI 304. and washer in stainless steel AISI 304.
Ø 12 Ø 14 Ø 16 Ø 12
ITEM DESCRIPTION ITEM DESCRIPTION
TOP-20P-P12B TOP-20P-P14B TOP-20P-P16B 50 TOP-40P-P12BB 50
50
50 Ø36
Ø36
38,5
Ø30
Ø30
38,5
Ø
65
49
Ø
40
B
M10 M10
2,5
2,5
Material: reinforced polyamide, eyebolt, screw, nut, washer in stainless Material: reinforced polyamide, eyebolt, screw, nut, washer in stainless
steel AISI 304, nut and hexagonal bushing in nickel plated brass. steel AISI 304, nut and hexagonal bushing in nickel plated brass.
VERSION VERSION VERSION VERSION
Ø B WITHOUT KNOB WITH KNOB Ø WITHOUT KNOB WITH KNOB
ITEM DESCRIPTION ITEM DESCRIPTION
12 TOP-23P-P12T TOP-23P-P12K 12 TOP-40P-P12T TOP-40P-P12K
14 23 TOP-23P-P14T TOP-23P-P14K 14 TOP-40P-P14T TOP-40P-P14K 50
50
16 TOP-23P-P16T TOP-23P-P16K 16 TOP-40P-P16T TOP-40P-P16K
20 24 TOP-24P-P20T TOP-24P-P20K
50
Ø30
45
M10
B
50
Ø
Ø
Ø30
Ø15
40
M10
L
4
44
Ø
B
M10 M10
Material: screws and heads in stainless steel AISI 304. Material: screws and heads in stainless steel AISI 304.
VERSION VERSION VERSION VERSION
Ø B WITHOUT KNOB WITH KNOB Ø L B WITHOUT KNOB WITH KNOB
ITEM DESCRIPTION ITEM DESCRIPTION
12 25 TOP-25S-P12T TOP-25S-P12K 40 TOP-40S-P12T TOP-40S-P12K
14 24 TOP-24S-P14T TOP-24S-P14K 50 12 60 15 TOP-60S-P12T TOP-60S-P12K
16 23 TOP-23S-P16T TOP-23S-P16K 90 TOP-90S-P12T TOP-90S-P12K
60 TOP-60S-P14T TOP-60S-P14K
14 16 50
For other type of mounting block, 90 TOP-90S-P14T TOP-90S-P14K
go to: 40 TOP-40S-P16T TOP-40S-P16K
Revision 001
16 60 17 TOP-60S-P16T TOP-60S-P16K
5 3 5 9 0 a 90 TOP-90S-P16T TOP-90S-P16K
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 3 5 9 0 a ROD MOUNTS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
VALU GUIDE® ROD MOUNTS ALL
53590a
App
als
cat
M at
e ri
io n
li
New Valu Guide Rod Mounts, used for holding and positioning adjusting rods. These strong,
yet economical mounts are available in a selection of rod diameter sizes, fixed or rotating
configurations, and various
tightening methods.
Material: rod mounts in stainless steel, eyebolt and washer and nuts in stainless steelknob
in polyamide with nickel plated brass insert.
25,4
38,1
9.7
38
16 mm (12 – 13 mm rod)
17,5 mm (14 mm rod)
19 mm (16 mm rod)
22 mm (20 mm rod)
.4
WITH KNOB 25
Ø 12-13 Ø 14 Ø 16 Ø 20 Positioning tabs
lock the rod
ITEM DESCRIPTION to brackets slots
at 90°.
VG-641T-K-12 VG-641T-K-14 VG-641T-K-58 VG-641T-K-20 8
67
46
39
A
30,5 31
24 38,6
* Ø20 versions can be converted to SpeedSet™ brackets * Ø20 versions can be converted to SpeedSet™ brackets
5 3 5 8 5 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
53595a
App
als
153 cat
M at
e ri
io n
li
75
Ø51
ITEM DESCRIPTION TRAVEL
153
30 VG-Q-75-40-M8 M8
M10
0-40 mm
Ø13,5
VG-Q-75-40-M10 M10
M8
40 max.
Tethered Positioning
Spacer shown.
VG-QT-01
Clip-on spacers for SPEEDSET™ Various brackets are available for Speedset™
adjustment systems. Go to:
ITEM DESCRIPTION
5 3 5 2 5 a
VG-QSC-10M 10 mm Red
5 3 5 3 5 a
VG-QSC-12M 12 mm Blue
VG-QSC-16M 16 mm Black
VG-QSC-20M 20 mm Green 10
5 3 5 6 5 a
Can be connected to the bracket or the
machine with the VG-QT-01 tether.
VG-QSC-25M 25 mm Purple
VG-QSC-30M 30 mm Orange
5 3 5 8 5 a
VG-QSC-40M 40 mm Grey
Revision 001
VG-QT-01 225 mm 5 3 5 9 0 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
53600a
App
als
cat
M at
e ri
io n
li
Material: metal support in stainless steel AISI 304,
clamp in polyamide.
Accessories: fixing washer code 13252
20°
23,5
Ø4
Ø4
K
Ø4
K
27 13
16,56
6
L
16,5
L
27
10
L
8,5 17,5
8,5 17,5
7 7
8,5 17,5
34
34
34
70
72
1,5 1,5
16,5 6
35 35 35
2
22,5 22,5 22,5
30
30
30
FIXING WASHER
Ø4
23,5
Ø40
7,5
ITEM R1,5
DESCRIPTION Ø10,5
Revision 001
Ø30
DTS-R40 50
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
53605a
App
als
cat
M at
e ri
io n
li
150
TYPE A
CAP-10M-PAB
Ø10
CC-16-10M-10M ITEM DESCRIPTION
TUBE-R105-6000 KIT
PC-25-10M-0M
Ø10 TYPE A
150
PC-KIT-0M 25*
19
TYPE B
TC-20-10M
Material: clamps in reinforced polyamide, tightening bolt
and connecting tubes in stainless steel AISI 304, closing
caps in polyethylene. ITEM DESCRIPTION
Components: nr° 1 T-Clamp, nr° 1 clamp, nr° 1 cross block, KIT
nr° 2 connecting tubes, nr° 4 closing caps. TYPE B
Supply: unassembled. PC-KIT-19M 25*
*Packaging: 25 completely kit.
TUBE:
- external d. 10 mm
- thickness 1 mm
1,5
- length 6 m
Material: Stainless Steel AISI 304
Material: PA-FG black
8,4
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 3 6 1 0 a CROSS BLOCKS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
Material: Acetal resin with stainless steel fasteners.
ucti
Maint
HEAVY DUTY
on
21 53,6 ALL
53610a
16
App
DP ITEM DESCRIPTION
als
cat
M at
e ri
io n
li
DP
10/ 8 VG-619-10M
M5 DP 12/10 VG-619-12M 10
14/12 VG-619-14M
M5 ITEM DESCRIPTION
10/ 8 CC-16-10M-10M - -
Ø22
50
DP2
PHOTOCELL CLAMP
TYPE A TYPE B TYPE C
T-CLAMP REFLECTOR CLAMP
DP1
60
M5
15 25 20 60
15 25 20
Ø10,5
40
ØDF
20
30
30
4
Ø6,5
M5 M5
1,2
DP1
DP1
30
8
15
Ø5,8
40,5
56 Ø8
5 3 6 2 0 a
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
53615a
App
als
cat
M at
e ri
io n
li
Features: cross blocks, in a variety of 76
bore configurations, including square bore 25
combinations, are manufactured from reinforced
polyamide.
DP1
5 3 6 1 0 a
Ø30
DP2
5 3 6 2 0 a
DP 1
DP 2 12/ 10 14/ 12 15 16/ 14 18 20/ 16
ITEM DESCRIPTION
12/ 10 CC-25-12M-12M - - - - -
14/ 12 - CC-25-14M-14M - - - -
15 - - CC-25-15M-15M - - -
50
16/ 14 CC-25-12M-16M * CC-25-14M-16M CC-25-15M-16M CC-25-16M-16M - -
18 - CC-25-14M-18M CC-25-15M-18M CC-25-16M-18M CC-25-18M-18M -
20/ 16 - CC-25-14M-20M - CC-25-16M-20M CC-25-18M-20M CC-25-20M-20M
M6
DP
Ø32
DP
Use: it connects two round or square rods at 90°. These clamps can also be assembled
for 2 parallel rods.
DP
ITEM DESCRIPTION
VG-60-14M-14M 14 12
Revision 001
VG-60-18M-18M 18 - 100
VG-60-20M-20M 20 16
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 3 6 2 0 a CROSS BLOCKS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
DP1 20
on
ALL
53620a
App
als
10 20 10 cat
M at
e ri
io n
li
40
20
Example application Adjustment with bolts
13 19 13 40 DP2
45
10 20 10
13 19 13
1
DP
rapid adjustment of both vertical and horizontal
45
DP2
side rail positions with the release of a single bolt
or knob.
Material: reinforced polyamide, screws in
stainless steel AISI 304.
Supply: assembled. ITEM DP 1 DP2
DESCRIPTION
CC-20-12M-12M 12 12
Ø30 50
CC-20-14M-14M 14 14
23
Ø13 Ø13
CC-19-12MK-12MK 100
Ø36
Material: housing in reinforced polyamide, ITEM DP 1 DP2
DESCRIPTION
21
Ø 50
Ø 50
Components:
• Housing in reinforced polyamide.
25
5 3 6 1 5 a
144
Features:
• Connects one round rod with flat bar at 90°.
A
ITEM FLAT Ø 40
DP 1
DESCRIPTION BAR
Revision 001
CC-42-12MK-825MK 12 25x8
50
CC-42-12MK-625MK 12 25x6
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 3 6 2 5 a T-CLAMP
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
53625a
App
als
cat
M at
e ri
io n
li
DP1
25,5
M6
85,5
30
DP 1
55
ITEM DESCRIPTION 75
For stainless steel version, go to:
TC-60-14M 14 12 5 3 5 7 0 a
TC-60-18M 18 - 100
TC-60-20M 20 16
BRACKET
TYPE A TYPE B
FOR ROD
TYPE A TYPE B
130
Ø
90
90
50
ITEM DESCRIPTION
SMB-60-14MK90 SMB-60-14MK 14 12
SMB-60-16MK90 SMB-60-16MK 16 14 50
Revision 001
Ø
11 9
11 9
SMB-60-20MK90 SMB-60-20MK 20 16
60
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
53630a
App
als
cat
M at
e ri
io n
li
ADVANTAGES:
Ø35
GRUB
39,5
SCREW M5
ITEM FLAT
INTERNAL BLOCK DP 1
DESCRIPTION BAR
12
Nickel
CC-42-12MQ-825MK 12 25x8 50
Ø30 Plated Brass
8
42
135
25
27
Ø40
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
e
POS. A
ucti
Maint
POS. B
on
ALL
53635a
App
als
cat
M at
e ri
io n
li
90
POS. C 7 52
75
Ø DF PC-9075-14M 14
32 PC-9075-15M 15
PC-9075-16M 16 50
For other type of clamp 14,5 25 PC-9075-18M 18
for photocells, go to: 25,5 PC-9075-20M 20
5 3 6 4 0 a
4
56
ITEM DESCRIPTION
Ø30
14,5
142
30
2,5
30
166,5
18 20,5
19
45°
ITEM DESCRIPTION
= =
34
18
IND-350R18M-20M
35 60
2,
15
(WITH HOLE)
conveyors and machines.
Material: PA-FG.
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
53640a
App
als
125 78 cat
M at
e ri
io n
li
48
55
110
123
30
13 32
38
29 14,5 24,5
Movement
on the 52
40,5
three axis 65
48
55
110
123
30
62
13 32
38
Ø20
39 1187 29 14,5 24,5
120
65 52 40,5
Movement
on the
Ø32
Ø32
three axis
Ø20
25,5 60 25,5
Material: cross clamp in reinforced polyamide, tightening bolt and tube 111
in stainless steel.
Supply: assembled.
Note: max recommended tightening torque 2 Kgm.
5 3 6 4 5 a CROSS BLOCKS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
Material: cross block in reinforced polyamide, bolts and nut
ucti
Maint
in stainless steel, adjustable handles in reinforced polyamide
on
ALL
53645a
App
als
cat
Application: for use in areas where frequent adjusting is M at
e ri
io n
li
required for vertical movement.
Supply: assembled.
Note: max recommended tightening torque 3 Kgm.
DP2
DP2
35
35
72
124 124 72
TYPE HV TYPE H
103
103
103
DP2
DP2
DP2
72
50
40 20 CC-52-S40M-R20M CC-52-S40M-R20MH CC-52-S40MH-R20MH CC-52-S40MH-R20M
40 20 CC-52-S40M-S20M CC-52-S40M-S20MH CC-52-S40MH-S20MH CC-52-S40MH-S20M
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 3 6 5 0 a CROSS BLOCKS
www.SystemPlastSmartGuide.com
e Co
Material: cross block in reinforced polyamide, bolts and nut in nanc nstr
ucti
Maint
stainless steel, adjustable handles in reinforced polyamide with
on
ALL
53650a
App
als
Application: for use in areas where frequent adjusting is required cat
M at
e ri
io n
li
for vertical movement.
Supply: assembled.
Note: max recommended tightening torque 3 Kgm.
60
DP2
35
35
72
72
124 124
TYPE HV TYPE H
103
103
103
DP2
72
72
5 3 6 4 5 a
TYPE STANDARD TYPE V TYPE HV TYPE H
DP 1 DP2
ITEM DESCRIPTION
38.1 16 CC-52-R38M-R16M CC-52-R38M-R16MH CC-52-R38MH-R16MH CC-52-R38MH-R16M
38.1 18 15 CC-52-R38M-R18M CC-52-R38M-R18MH CC-52-R38MH-R18MH CC-52-R38MH-R18M
38.1 20 CC-52-R38M-S20M CC-52-R38M-S20MH CC-52-R38MH-S20MH CC-52-R38MH-S20M
38.1 20 CC-52-R38M-R20M CC-52-R38M-R20MH CC-52-R38MH-R20MH CC-52-R38MH-R20M
50
42.2 16 CC-52-R42M-R16M CC-52-R42M-R16MH CC-52-R42MH-R16MH CC-52-R42MH-R16M
42.2 18 15 CC-52-R42M-R18M CC-52-R42M-R18MH CC-52-R42MH-R18MH CC-52-R42MH-R18M
Revision 001
SIDE MOUNTING
TOP BRACKETS
5 4 0 2 0 a
SIDE MOUNTING
TOP BRACKETS
5 4 0 5 0 a
SUPPORT HEADS
5 4 0 6 0 a
CONNECTING JOINTS
5 4 0 7 0 a
CONNECTING JOINTS
STAINLESS STEEL
5 4 0 8 0 a
SUPPORT BASES
5 4 0 3 0 a
5 4 0 4 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Material: reinforced polyamide. Screw, nut and washers in stainless steel AISI 304
Maint
on
Note: the bracket can be inclined by 5° in both directions when using the lower hole and the upper slot hole. ALL
54020a
App
There are two optional holes that can easily be opened by removing the thin membrane.
als
cat
M at
e ri
io n
li
In this way the centre distance of the holes can be:
• Enlarged to 70 mm or
• Reduced to 30 mm
Then it is also possible to use an incline of 10° in both directions
20 70
24,5
30 14 11
Ø10,5
74
97
TUBE Ø 48.3
30
MATERIAL
175
ITEM DESCRIPTION
Ø10,5
12
PA-FG
VG-3050-R150 25
BLACK
60
M8
Ø
55 Ø6
20 70
19
93,5
60
201
122
M8
61
DF 44,5
19,5
80 Ø 64
DF - TUBE Ø DF -TUBE
MATERIAL 48.3 50.9 40X40
ITEM DESCRIPTION
PA-FG
VG-3050E-R150 VG-3050E-R200T VG-3050E-S40M 25
BLACK
20 78
10,5
3930
125
30
185
TUBE Ø 60.3
MATERIAL
10,5
ITEM DESCRIPTION
M10
PA-FG
VG-3050-R200 25
60
BLACK
Ø 76
Revision 001
92
52,5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 4 0 3 0 a SUPPORT BASES
www.SystemPlastSmartGuide.com
e Co
Features: Increased stability. Self cleaning design for all support bases in this page nanc nstr
ucti
Maint
Material: Reinforced polyamide threaded bushings and spacers in nickel plated brass.
on
ALL
54030a
App
als
cat
M at
e ri
io n
li
85 See bipods with joint:
5 4 0 3 0 b
Ø450
Ø490
Ø80
ØDF1
M16
69
145
BIPODS
Zn: Zinc Plated Steel TUBE Ø - DF1
SS AISI 304: 42,4 48,3 50,9 60,3
Stainless steel (1 ¼”) (1 ½”) - (2”)
FASTENERS ITEM DESCRIPTION
PA-FG
BLACK Zn VG-BP-R125-BM16-G VG-BP-R150-BM16-G - VG-BP-R200-BM16-G
15
SS AISI 304 VG-BP-R125-BM16-S VG-BP-R150-BM16-S VG-BP-R200T-BM16-S VG-BP-R200-BM16-S
85
ØDF1
Ø80
M16
Ø450
Ø490
69
145
TRIPODS
Zn: Zinc Plated Steel TUBE Ø - DF1
SS AISI 304: 42,4 48,3 50,9 60,3
Stainless steel
(1 ¼”) (1 ½”) - (2”)
FASTENERS ITEM DESCRIPTION
PA-FG
Revision 001
5 4 0 3 0 b SUPPORT BASES
www.SystemPlastSmartGuide.com
85 e Co
nanc nstr
ucti
Maint
on
ALL
54030b
App
als
104 cat
M at
e ri
io n
li
69
Ø490
See bipods
Ø450
ØDF1
DF2
Ø80 & tripods:
5 4 0 3 0 a
105
M16
69
145
Zn: Zinc Plated Steel
SS AISI 304: Stainless steel BIPODS 180° WITH JOINT
TUBE Ø - DF1
PA-FG
BLACK 48.3 50.9 60.3
(1 ½”) - (2”)
TUBE Ø FASTENERS ITEM DESCRIPTION
DF2
42,4 Zn VG-BPT-R150-R125-BM16-G VG-BPT-R200T-R125-BM16-G VG-BPT-R200-R125-BM16-G
(1 ¼”) SS AISI 304 VG-BPT-R150-R125-BM16-S VG-BPT-R200T-R125-BM16-S VG-BPT-R200-R125-BM16-S
15
48,3 Zn VG-BPT-R150-R150-BM16-G - -
(1 ½”) SS AISI 304 VG-BPT-R150-R150-BM16-S - VG-BPT-R200-R150-BM16-S
85
104
69
ØDF1
ØDF2
Ø80
105
M16
Ø450
Ø490
69
145
Zn: Zinc Plated Steel
SS AISI 304: Stainless steel BIPODS 120° WITH JOINT
TUBE Ø - DF1
PA-FG
BLACK 48.3 50.9 60.3
(1 ½”) - (2”)
TUBE Ø FASTENERS ITEM DESCRIPTION
DF2
42,4 Zn VG-BPV-R150-R125-BM16-G - -
(1 ¼”) SS AISI 304 VG-BPV-R150-R125-BM16-S VG-BPV-R200T-R125-BM16-S VG-BPV-R200-R125-BM16-S
Revision 001
15
48,3 Zn VG-BPV-R150-R150-BM16-G - -
(1 ½”) SS AISI 304 VG-BPV-R150-R150-BM16-S - VG-BPV-R200-R150-BM16-S
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 4 0 4 0 a SUPPORT BASES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
54040a
App
als
cat
M at
e ri
io n
li
87,5
135
50
BPS-4020-S45M-BM16-S BPS-4020-S50M-BM16-S 15
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
125
Maint
125
on
ALL
54050a
App
als
cat
M at
e ri
io n
li
45
45
R46 R46
10,5 10,5
160
160
95
95
70
70
25
25
Side mounting top bracket with
20
20
expansion plug:
- for round Tubes Ø 48,3/50,9 x1.5 mm;
60,3 60,3 M M
- for square Tubes 40x40x2 mm.
7
7
Ø
39
39
76
76
30
30
polyamide.
Conical insert in reinforced polyamide.
Threaded bushing in nickel plated brass.
Bolt and washer in stainless steel.
Note: max recommended tightening TUBE Ø TUBE
torque 2.5 Kgm. PATENTED 48.3 50.9 40X40
Application: the bracket can be inclined
ITEM DESCRIPTION
by 30°.
PA-FG
M10 VG-3051-R150-NB VG-3051-R200T-NB VG-3051-S40M-NB 25
BLACK
50 102,5
Ø9 12 48 32,5
Material: reinforced polyamide, screws and nuts in
M8 stainless steel AISI 304.
Note: max. recommended tightening torque 1.5
Kgm.
4
Ø65
101
47,5
TUBE Ø 48,3
81
Ø
PA-FG
ITEM DESCRIPTION
Ø9
BLACK
VG-3052-R150 25
Ø
71
82
47
84 17 72 17
7
106
10
126
TUBE Ø 48,3
115
PA-FG
ITEM DESCRIPTION
BLACK
Ø25
Revision 001
VG-3055-R150 25
115
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a Frame & structure
5 4 0 1 0 a
supports
5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5Miscellaneous
4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 4 0 6 0 a SUPPORT HEADS
www.SystemPlastSmartGuide.com
e Co
L1 10 90 nanc nstr
e
9
ucti
Maint
on
M8 ALL
54060a
App
als
cat
M at
e ri
io n
li
D.E.
Ø35
132
116
92
Ø
55
65 25 75
85 100
Material: reinforced polyamide; screw, nut and washers in stainless steel AISI 304.
Note: max. recommended tightening torque 2 Kgm.
TUBE Ø
42,4 48,3 50,9 60,3
D.E. L1 ITEM DESCRIPTION
PA-FG 65 43 - VG-3080-R150 - -
BLACK 65 43 - - VG-3080-R200T -
76 43 - - - VG-3080-R200
6 74
Ø34
Ø65
70
95
TUBE Ø
M8 48,3 50,9
70
ITEM DESCRIPTION
95 26 54 PA-FG
BLACK
VG-3070-R150 VG-3070-R200T 25
Ø9 M8 73,5
Ø9
TUBE Ø
Ø
60,3
140
116
100
ITEM DESCRIPTION
PA-FG
BLACK
VG-3087-R200 25
5 4 0 7 0 a CONNECTING JOINTS
www.SystemPlastSmartGuide.com
e Co
DP1/Q1 A B C D E F nanc nstr
ucti
Maint
42,4 134 68 86 45 60 3
on
ALL
54070a
48,3 134 68 86 45 60 3
App
als
cat
M at
e ri
io n
li
PA-FG 50,9 146 80 98 51 60 3
BLACK 60,3 146 80 98 51 60 3
40 134 68 86 45 60 3
50 146 80 98 51 60 3
M8 DP1
M8 Q1
D
D
A
E
E
DP2/ Q2 F DP2/ Q2 F
Material: reinforced polyamide, screws and nuts in
stainless steel AISI 304. C B C B
Note: max. recommended tightening torque 1.5 Kgm.
TUBE Ø TUBE
DP2 Q2
DP1/Q1 42,4 48,3 50,9 60,3 40 50
ITEM DESCRIPTION
42,4 VG-3110-R125-R125 - - - - -
48,3 VG-3110-R150-R125 VG-3110-R150-R150 - - - -
50,9 VG-3110-R200T-R125 VG-3110-R200T-R150 VG-3110-R200T-R200T - - -
25
60,3 VG-3110-R200-R125 VG-3110-R200-R150 VG-3110-R200-R200T VG-3110-R200-R200 - -
40 - - - - VG-3110-S40M-S40M -
50 - - - - - VG-3110-S50M-S50M
E D
F
DP1
A
M8
C
B 42,4
5 4 0 8 0 a CONNECTING JOINTS
www.SystemPlastSmartGuide.com
Ø10,5 35
e Co
nanc nstr
e
Ø11
ucti
Maint
on
ALL
54080a
App
als
cat
25
M at
e ri
io n
li
100
40 12 Flat Bar
25 x 8
Ø 48,3
128
39 88
Ø 48,3
,3
48
Ø
Thickness: S = 2 mm.
Surface: tumbling finish.
Use: with Tubes Ø 48,3
Note: the connecting joint is supplied without screws.
Material: Stainless Steel AISI 304. Material: Stainless Steel AISI 304.
TC-R150-S 25 TCHD-R150-R150-S 25
100 50 85 50
82,5 82,5 2,5 82,5
TEE-S2015-BM8 20 x 20 x 1.5
A
M8
20
PA BLACK 100
TEE-S2020-BM8 20 x 20 x 2
20
5 4 0 8 0 z APPLICATION EXAMPLES
www.SystemPlastSmartGuide.com
Go to:
5 4 0 1 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5 4products
5 1 0 a
Miscellaneous
5 Equipment
7 0 1 0 a
5 4 5 1 0 a MISCELLANEOUS PRODUCTS
www.SystemPlastSmartGuide.com MACHINE GUARDING
TUBE JOINTS
5 4 5 2 0 a
PANEL CLAMPS
5 4 5 3 0 a
MOUNTING
PROFILES
5 4 5 4 0 a
HANDLES
5 4 5 6 0 a
DOOR LOCKS
5 4 5 7 0 a
DOOR STOP
5 4 5 2 0 a HINGES
5 4 5 5 0 a
MISCELLANEOUS COMPONENTS
RATCHET
END PLUGS HANDLES
5 4 5 3 0 a 5 4 6 2 0 a
KNOBS
5 4 6 0 0 a SHAFT COLLAR
5 4 6 1 0 a 5 4 6 3 0 a
Information about this
product is only available on
Revision 001
5 4 5 2 0 a TUBE JOINTS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
54520a
App
als
cat
M at
e ri
io n
li
25 30
,4 ,4 ,2 ,2
25 30
FOR TUBES
25 X 25 X 1,5 mm - 30 X 30 X 2 mm
25,4
44
30,2
42
TYPE: L TYPE: T
Application: Application:
joints can be used with joints can be used with square Tubes
square Tubes 25x25x1,5 mm. 30x30x2 mm.
DOOR STOP
Ø 4,5
Ø8
4 6 5
15 52
DOOR STOP
ITEM
A B
Application: door stop is normally DESCRIPTION
PA-FG A
used in order to support and
BLACK 25 31 DS-25M52 52
position doors or windows of
100
machine guards. 30 36 DS-30M52
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5 4products
5 1 0 a
Miscellaneous
5 Equipment
7 0 1 0 a
5 4 5 3 0 a PANEL CLAMPS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
54530a
App
als
cat
M at
e ri
io n
li
R12 S
PANEL CLAMPS
8
Material: reinforced polyamide
25
9
with stainless steel bolt.
12
Application: panel clamp permits rapid
8
installation of panels. A
Supply: assembled. 24 B
8,5 15
7,5
Ø 7,5
18
M6
25
40
Ø 4,5
7,5
FIXING BLOCK
15
Application: block permits rapid
installation of the panels and can
be used with panels of different ITEM DESCRIPTION
PA-FG
thickness.
Supply: without screws. BLACK
PMB-40M6-PAB 10
END PLUGS
A A
5
B
A
A
A B ITEM DESCRIPTION
25 13,5 CAP-25M-PAB
Application:
30 14 CAP-30M-PAB 100
square Tubes, dimensions:
25x25x1,5 mm or 25x25x1,2 mm; 50 15 CAP-50M-PAB
30x30x2 mm; 50x50x2,5 mm.
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5 4products
5 1 0 a
Miscellaneous
5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
54540a
App
als
Application: this profile can be used with cat
M at
e ri
io n
li
plain Tubes 25x25 mm in different materials. If
used for the mounting of panels and windows
it offers the possibility to remove the panels
3 to 5 mm
without disassembling the complete structure,
thanks to the special profile in PVC, partially
FLEXIBLE
rigid and partially flexible.
EDGE
19
MATERIAL
PVC
ITEM DESCRIPTION
8
GP-25S-PVCB-2500 2,5 m 10
PVC RIGID
L.=2,5 m
FLEXIBLE 3 to 6 mm
EDGE MATERIAL
PVC
ITEM DESCRIPTION
6,4
GP-L25S-PVCB-2500 2,5 m 10
25
6,5 1,5
9,5
Item description
SF-CD1-6M-PVCB-2000 2m 10
7,5
Ma
25 x 6 L.= 2 m
mm
1,5
1,5
ITEM DESCRIPTION
Revision 001
25 SF-SPS-6M-PVCB-2000 2 m* 10
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5 4products
5 1 0 a
Miscellaneous
5 Equipment
7 0 1 0 a
5 4 5 5 0 a HINGES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
54550a
App
als
cat
M at
e ri
50 B io n
li
A
F
HINGE
46
70
ITEM
F A B
Material: reinforced polyamide, pin in stainless R9 DESCRIPTION
steel AISI 430. 6,5 10,5 6 VG-633-M6
Note: door can be opened up to 180°. 50
30 10 10 8,5 13,5 4 VG-633-M8
Supply: assembled.
HINGE
L1
L1
L
Material: reinforced
polyamide, pin and screw M
C
A
up to 180°.
Supply: assembled. D G F F
B
TYPE 1 TYPE 2 TYPE 3 TYPE 4
ITEM DESCRIPTION
A B C D E F G H I L L1 M
TYPE 1 TYPE 2 TYPE 3 TYPE 4
4,2 HNG-40M5-PAB - HNG-40R4C-PAB HNG-40R4-PAB
39 40 25 25 10 10.5 15 14 3 M5 -
5,5 - - - HNG-40R5-PAB
M5 HNG-49M5-PAB HNG-49M514-PAB HNG-49R5C-PAB HNG-49R5-PAB
49 49 31 30 11 13 19 17 4 5,5 14
M6 HNG-49M6-PAB - - - 50
M5 HNG-65M5-PAB - - -
64 65 40 40 13.5 15 23 24 5 M6 6,5 17 HNG-65M6-PAB HNG-65M617-PAB HNG-65R6C-PAB HNG-65R6-PAB
M8 HNG-65M8-PAB - - -
23,5
18 11,5 11,5
M M M
=
N
N
L
L
49,5
80
6
33
HINGE
23
=
5 4 5 6 0 a DOOR HANDLES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
54560a
App
als
cat
M at
e ri
io n
li
HANDLE
26
Material: reinforced polyamide.
ITEM
I L C H H1 A B D D D
DESCRIPTION
93,5 112 21 36 30 13 6 HDL-94-R6-PAB
10,5 6,5
8,5 HDL-117-R6-PAB
H
H1
117 15 50
A
139 26 41 34 6 13 8,5 HDL-117-R8-PAB
B
120 10 4 10,5 6,5 d I
HDL-120-R6-PAB
L
28
M ITEM DESCRIPTION
40
HANDLE
30
29
Material: polyamide, threaded insert in brass. M10 HDL-120-M10-PAB 50 98
M
120
138
34
ITEM DESCRIPTION
HANDLE VG-632-M8-PAB 50
35
15
M A B ITEM DESCRIPTION
HDL-120-M8-PAB
M8
34
99 117 HDL-117-M8-PAB
16
HANDLE 15°
25
Min. order quantity: 200 pcs. M A
Material: polyamide, threaded insert in
brass. B
44
132
24
15°
25
ITEM
TYPE DESCRIPTION
44
Closed Open
24
closed FT-HDL-1-PAB
50
9
open FT-HDL-1C-PAB
88
Revision 001
Ø 6,5
SAFETY HANDLE WITH COVER Min. order quantity: 200 pcs. 109
130
9
88 Ø 6,5
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5 4products
5 1 0 a
Miscellaneous
5 Equipment
7 0 1 0 a
5 4 5 7 0 a DOOR LOCKS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
54570a
App
als
cat
M at
e ri
3 23,5 io n
li
Ø19
Ø5,5
ITEM
B
A B
Ø6,9
DESCRIPTION
A
Ø3,5
15
MAGNETIC LOCK 22,5 45 FT-MAG-45-R5
Ø9 100
16
7,5
Application: the magnetic lock 16 37 59,5 FT-MAG-60-R5
guarantees rapid door locking. 30 30
It is easy to install and can be
used with various structures in
different materials.
31 12
Ø 4,5
50
Ø8
19
ITEM DESCRIPTION
32
13
FT-LOCK32-R4 100
SPRING LOADED LATCH
8
14 28
Application: the latch guarantees
a secure locking of doors and
windows, and prevents the 22 38
9,5
H = 30 ÷ 36 (min. - max)
H1 = 23÷28 (min. - max)
ITEM DESCRIPTION
FT-LOCK-R24 10
Ø 24,5
20 16
H1
Application instructions
1.5÷10
(see drawing):
Assembly 1 for situations with
18
5 4 6 0 0 a KNOBS
www.SystemPlastSmartGuide.com
e Co
For other knobs go to: 5 4 6 1 0 a nanc nstr
ucti
Maint
on
41 ALL
54600a
App
als
32 cat
M at
e ri
Wr.19 io n
li
100
Ø 22
M
ITEM DESCRIPTION
Material: reinforced polyamide with nickel plated M8 M10
brass insert. 50 25
Note: max. torque on the knob 3,5 Kgm. KNF-50H41-M8H KNF-50H41-M10H
40
10 9 21
Wr.19
ITEM DESCRIPTION
M10 M10
Material: reinforced polyamide, insert in nickel
plated brass. KNF-50H40-M10
Note: max. torque on the knob 2 Kgm. 50 25
9
Wr.19 ITEM DESCRIPTION
M6 M10
M
Wr.19 9
ITEM DESCRIPTION
M10
M
56
Wr.19 9
ITEM DESCRIPTION
M10
Wr.19
M10
L L1 ITEM DESCRIPTION
Ø15
ITEM DESCRIPTION
Ø34
M
M12 M16
Material: reinforced polyamide, hexagonal
insert in nickel plated brass. KNF-80H51-M12H KNF-80H51-M16H
Revision 001
5 4 6 1 0 a KNOBS
www.SystemPlastSmartGuide.com
e Co
For standard knobs go to: 5 4 6 0 0 a nanc nstr
ucti
Maint
on
ALL
54610a
App
als
STARKNOB MALE cat
M at
e ri
io n
li
Material: polyamide, threaded insert in stainless steel AISI 304.
Note: starknob DIN 6335.
ITEM DESCRIPTION
L H H D1
M6 M8 M10
D=20
10 KNM-20H13-M610 - -
15 KNM-20H13-M615 - -
13 7 8,5
20 KNM-20H13-M620 - -
25 KNM-20H13-M625 - -
D D=25
10 KNM-25H16-M610 - -
15 KNM-25H16-M615 - -
16 8,5 11,5
20 KNM-25H16-M620 - -
H
25 KNM-25H16-M625 - -
h
D=30
15 KNM-30H21-M615 KNM-30H21-M815 -
20 KNM-30H21-M620 KNM-30H21-M820 -
100
L
20,5 11,5 14
25 KNM-30H21-M625 KNM-30H21-M825 -
30 KNM-30H21-M630 KNM-30H21-M830 -
d D=40
d1 15 KNM-40H26-M615 KNM-40H26-M815 -
20 KNM-40H26-M620 KNM-40H26-M820 KNM-40H26-M1020
25 25,5 14,5 17 KNM-40H26-M625 KNM-40H26-M825 KNM-40H26-M1025
30 KNM-40H26-M630 KNM-40H26-M830 KNM-40H26-M1030
35 - - KNM-40H26-M1035
D=50
15 KNM-50H32-M615 KNM-50H32-M815 -
20 KNM-50H32-M620 KNM-50H32-M820 KNM-50H32-M1020
32 19 22
25 KNM-50H32-M625 KNM-50H32-M825 KNM-50H32-M1025
30 KNM-50H32-M630 KNM-50H32-M830 KNM-50H32-M1030
STARKNOB FEMALE
ITEM DESCRIPTION
H
L H H1 D1
L
H1
M6 M8 M10
D=30
d D1
15 20,5 11,5 14 KNF-30H21-M6 KNF-30H21-M8 -
D=40
100
17 25,5 14,5 17 KNF-40H26-M6 KNF-40H26-M8 -
D=50
17 30 19 22 KNF-50H32-M6 KNF-50H32-M8 KNF-50H32-M10
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5 4products
5 1 0 a
Miscellaneous
5 Equipment
7 0 1 0 a
5 4 6 2 0 a RATCHET HANDLES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
54620a
App
als
cat
M at
e ri
io n
li
Material: polyamide, insert in nickel plated brass. Material: polyamide, threaded insert in stainless steel AISI 304.
B B
H
H1
H
H1
H3
H2
H3
H2
D1
D2
D1
D2
A A
D
S
Dimensions applicable for both versions
FEMALE VERSION MALE VERSION
THREAD A B H D S D2 H1 H3
ITEM DESCRIPTION D1 H2 ITEM DESCRIPTION D1 H2
RH-45-M6-S M6 8 M6 53 45 33,5 16 10,5 12 29 7,5 RH-45-M615-S 15
RH-65-M8-S M8 11 50 M8 75 65 41 20 13,5 15 34 7,5 RH-45-M620-S M6 20
RH-80-M10-S M10 16 M10 92 80 53 24 16,5 20 44 7,5 RH-45-M630-S 30
RH-65-M820-S 20
RH-65-M825-S 25 50
M8
RH-65-M830-S 30
RH-65-M860-S 60
RH-80-M1025-S 25
M10
RH-80-M1030-S 30
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
A
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a 5 4products
5 1 0 a
Miscellaneous
5 Equipment
7 0 1 0 a
Ød
5 4 6 3 0 a K SET COLLARS
H
www.SystemPlastSmartGuide.com
e Co
L
nanc nstr
ucti
Maint
Ød ØD
on
ALL
54630a
VERSION ROUND
K
BORE VERSION WITH KEYWAY
App
als
cat
M at
e ri
io n
li
L
ØD
A
COLLAR
SHAFT
H
Ød Ød
K K
L
L
ØD ØD
A 18
ITEM
d A DESCRIPTION
30x30 60x60 VG-SC-S30M
40x40 72x72 VG-SC-S40M
d
60x60 95x95 VG-SC-S60M
Revision 001
Material: reinforced polyamide, bolts in stainless steel and insert in nickel plated brass and nut in galvanized steel.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
Single Lag
hole pad
5 5 6 3 0 a
Welded
endplates
5 5 7 6 5 c
5 5 5 7 0 a 5 5 6 7 5 a 5 5 7 2 0 a
75 - 80 5 5 6 1 5 a - 5 5 6 9 0 a 5 5 7 0 5 a
5 5 7 8 0 a
5 5 5 8 5 a
5 5 6 0 0 a
100
5 5 6 1 5 a 5 5 6 6 0 a 5 5 6 7 5 a 5 5 7 0 5 a
5 5 6 4 5 a 5 5 8 4 0 a 5 5 6 9 0 a 5 5 7 2 0 a
Threaded
125 5 5 7 9 5 a 5 5 7 3 5 a tube ends
5 5 8 1 0 a
5 5 8 2 5 a 5 5 7 6 5 a
General tolerance on total height L ± 2 mm
Revision 001
Information about this product is only available on our Smart Guide® website.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
15° ALL
55525a
App
als
M cat
M at
e ri
io n
li
L2
L
19,5
3
Ø 40
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
mm mm ANTI-SLIP
STANDARD
WITH RUBBER
M8 71 43 LA40H-PM8L70 LA40H-PM8L70R
Zinc Plated Steel
71 43 LA40H-PM10L70 LA40H-PM10L70R
M10
99 71 LA40H-PM10L100 LA40H-PM10L100R 2A 14 12.000
M8 71 43 LA40H-SM8L70 LA40H-SM8L70R
Stainless Steel AISI 304
71 43 LA40H-SM10L70 LA40H-SM10L70R
M10
99 71 LA40H-SM10L100 LA40H-SM10L100R 2A 14 12.000
99 71 LA40H-SM12L100 LA40H-SM12L100R
M12
153 125 LA40H-SM12L155 LA40H-SM12L155R
M16 149 119 LA40-SM16L150 LA40-SM16L150R 15A 13 12.000
Ø 10 mm
e Co
nanc nstr
ucti
Maint
on
ALL
55540a
App
als
15° cat
M at
e ri
io n
li
M
L2
L
19,5
3
Ø 50
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
mm mm
ANTI-SLIP
STANDARD
WITH RUBBER
M8 71 43 LA50H-PM8L70 LA50H-PM8L70R
71 43 LA50H-PM10L70 LA50H-PM10L70R
M10
Zinc Plated Steel
M10
99 71 LA50H-SM10L100 LA50H-SM10L100R 2A 14 12.000
99 71 LA50H-SM12L100 LA50H-SM12L100R
M12
153 125 LA50H-SM12L155 LA50H-SM12L155R
99 69 LA50-SM16L100 LA50-SM16L100R
M16 149 119 LA50-SM16L150 LA50-SM16L150R 15A 13 12.000
Ø 10 mm
55 shore hardness.
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
55555a
App
als
cat
M at
e ri
io n
li
15°
M 15°
M
L2
L2
L
L
23
14
Ø 60
3
Ø 60
2
MATERIAL
MATERIAL
MATERIAL
SPINDLE
SPINDLE
SPINDLE
L L2 L L2
TYPE
TYPE
NUT
M M ITEM DESCRIPTION
mm mm mm mm
ANTI-SLIP
STANDARD
WITH RUBBER
94 60 LA60H-PM16L95 LA60H-PM16L95R 115 90 LA60E-PM12L115
Zinc Plated Steel
149 115 LA60H-PM16L150 LA60H-PM16L150R M12 135 110 LA60E-PM12L135 15E 9 9.000
Zinc Plated Steel
M16
179 145 LA60H-PM16L180 LA60H-PM16L180R 2B 20 155 130 LA60E-PM12L155
15.000
229 195 LA60H-PM16L230 LA60H-PM16L230R 95 70 LA60E-PM16L95
M20 179 145 LA60H-PM20L180 LA60H-PM20L180R M16 145 120 LA60E-PM16L145 13 12.000
15A
M24 236 195 LA60H-PM24L235 LA60H-PM24L235R 2C 24 185 160 LA60E-PM16L185
M16 3C 24 4.000
104 62 LA60H-NM16L105-SN LA60H-NM16L105R-SN INOX M20 185 155 LA60E-SM20L185 16 12.000
L2
14
Ø 60
2
Ø 24,5 mm
Ø 14,5 mm
RPAD5306
Ø 19 mm
Ø 10 mm
e Co
nanc nstr
MATERIAL
MATERIAL
e
ITEM DESCRIPTION
ucti
SPINDLE
SPINDLE
Maint
L L2
TYPE
on
NUT
M
mm mm
ALL
55570a
ANTI-SLIP
App
STANDARD
als
WITH RUBBER cat
M at
e ri
io n
li
95 70 LA80-02B-PM10L95 - 15D 7
M10 10.000
150 125 LA80H-02B-PM10L150-PN LA80H-02B-PM10L150R-PN 2A 14 FE.ZN
115 90 LA80-02B-PM12L115 -
15E 9
135 110 LA80-02B-PM12L135 -
M12 13.000
150 125 LA80H-02B-PM12L150-PN LA80H-02B-PM12L150R-PN 2A 14 FE.ZN
155 130 LA80-02B-PM12L155 - 9
Zinc Plated Steel
L2
M20 185 160 LA80-02B-PM20L185 LA80-02B-PM20L185R 16 18.000
M10 95 70 LA80-02B-SM10L95 - 15D 7 10.000
L
95 70 LA80-02B-SM12L95 - 15E 9 Ø 8,5
95 70 LA80H-02B-SM12L95-SN LA80H-02B-SM12L95R-SN 2A 14 INOX
15,5
17
115 90 LA80-02B-SM12L115 -
Stainless Steel AISI 304
2,5
145 120 LA80-02B-SM16L145 -
M16 145 120 LA80-02B-SM16L145-SN LA80-02B-SM16L145R-SN 15A 13 15.000 INOX
185 160 LA80-02B-SM16L185 -
185 160 LA80-02B-SM16L185-SN LA80-02B-SM16L185R-SN INOX
205 180 LA80-02B-SM16L205 -
Base: Reinforced polyamide. Without Nut
Characteristics:
The foot can be fixed to the floor by opening the signs marked on the base.
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
mm mm ANTI-SLIP
STANDARD
WITH RUBBER
M10 100 70 LA80H-PM10L100 LA80H-PM10L100R 15°
Plated Steel
95 70 LA80H-SM12L95 LA80H-SM12L95R 2A 14
AISI 304
M12
150 125 LA80H-SM12L150 LA80H-SM12L150R 15.000
95 70 LA80-SM16L95 LA80-SM16L95R
M16 15A 13
145 120 LA80-SM16L145 LA80-SM16L145R
18
Ø 80
e Co
Characteristics: nanc nstr
ucti
The foot can be fixed to the floor by opening the signs marked on the base.
Maint
on
ALL
55585a
App
als
cat
M at
e ri
io n
li
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
mm mm ANTI-SLIP
STANDARD
WITH RUBBER
99 60 LA100H-02B-PM16L100 LA100H-02B-PM16L100R
154 115 LA100H-02B-PM16L155 LA100H-02B-PM16L155R
M16
184 145 LA100H-02B-PM16L185 LA100H-02B-PM16L185R
Zinc Plated Steel
L2
154 115 LA100H-02B-SM16L155 LA100H-02B-SM16L155R
M16
184 145 LA100H-02B-SM16L185 LA100H-02B-SM16L185R
L
234 195 LA100H-02B-SM16L235 LA100H-02B-SM16L235R 2B 19
18.000
124 85 LA100H-02B-SM20L125 LA100H-02B-SM20L125R
Ø12,5
M20 154 115 LA100H-02B-SM20L155 LA100H-02B-SM20L155R
184 145 LA100H-02B-SM20L185 LA100H-02B-SM20L185R
28
23
M24 160 115 LA100H-02B-SM24L160 LA100H-02B-SM24L160R 2C 24
3
Ø 74
PA.FE
Characteristics:
The foot can be fixed to the floor by opening the signs marked on the base.
MATERIAL
SPINDLE
SPINDLE
L L2
TYPE
M ITEM DESCRIPTION
mm mm
100 70 LA100E-02B-PM16L100
15°
150 120 LA100E-02B-PM16L150 M
Zinc Plated Steel
M16 13 12.000
190 160 LA100E-02B-PM16L190
210 180 LA100E-02B-PM16L210 15A
L2
Ø 12,5
220 190 LA100E-02B-PM20L220
100 70 LA100E-02B-SM16L100
19,5
Stainless Steel AISI 304
22
Ø 24,5 mm
Ø 14,5 mm
RPAD9308
Ø 19 mm
Ø 19 mm
e Co
nanc nstr
15°
ucti
Maint
on
M ALL
55600a
App
als
cat
M at
e ri
io n
li
L2
L
Ø11,5
27
15
3
Ø83
Ø110
Characteristics:
The foot can be fixed to the floor by opening the signs marked on the base.
MATERIAL
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
NUT
M
mm mm ANTI-SLIP
STANDARD
WITH RUBBER
153 115 LA110H-02B-PM16L155 LA110H-02B-PM16L155R
M16 183 145 LA110H-02B-PM16L185 LA110H-02B-PM16L185R
Zinc Plated Steel
RPAD10108
Ø 19 mm
e Co
15° nanc nstr
ucti
Maint
M
on
ALL
55615a
App
als
cat
M at
e ri
io n
li
L2 New hygienic design prevents dirt getting
L
Ø 12,5
28
15,5
Ø 54
ØD
Characteristics:
The foot can be fixed to the floor by opening the signs marked on the base.
MATERIAL
SPINDLE
SPINDLE
L L2
TYPE
M ITEM DESCRIPTION
mm mm
98 70 LAS80-02B-SM12L100
Stainless Steel AISI 304
M12 9
128 100 LAS80-02B-SM12L130
98 70 LAS80-02B-SM16L100 18 13.000
M16 13
168 140 LAS80-02B-SM16L170
SPINDLE
L L2
TYPE
M ITEM DESCRIPTION
mm mm
103 70 LAS100-02B-SM16L105
AISI 304
M16 13
173 140 LAS100-02B-SM16L175 18 15.000
SPINDLE
L L2
TYPE
M ITEM DESCRIPTION
mm mm
103 70 LAS120-02B-SM16L105
AISI 304
M16 13
173 140 LAS120-02B-SM16L175 18 18.000
e Co
nanc nstr
MATERIAL
MATERIAL
e
ITEM DESCRIPTION
ucti
SPINDLE
SPINDLE
Maint
L L2
TYPE
on
NUT
M
mm mm 15°
ALL
55630a
ANTI-SLIP
App
STANDARD
als
WITH RUBBER M cat
M at
e ri
io n
li
103 71 LA60H-01-PM10L105 -
M10
157 125 LA60H-01-PM10L155 -
L2
Zinc Plated Steel
2A 14
M12 157 125 LA60H-01-PM12L155 LA60H-01-PM12L155R
L
M14 157 125 LA60H-01-PM14L155 - 15.000 FE.ZN
103 69
23
LA60-01-PM16L105 LA60-01-PM16L105R
14
M16 153 119 LA60-01-PM16L155 - 15A 13 30 50 15
3
193 159 LA60-01-PM16L195 -
Ø9
103 69 LA60-01-SM16L105 LA60-01-SM16L105R
AISI 304
Ø 60
Ø 60
SS
95
SPINDLE
L2
L2
L L2
TYPE
M ITEM DESCRIPTION
mm mm
L
L
103 69 LA60S-01-PM16L105
Zinc Plated
23
23
Steel
14
14
103 69 LA60S-01-SM16L105
SS
RPAD5207
Ø 15 mm
SPINDLE
L L2
TYPE
M ITEM DESCRIPTION
mm mm
L2
Ø12.5
Steel
50 76 19
SS
SPINDLE TYPE
Ø 100
Revision 001
145
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
Characteristics: nanc nstr
e
The foot can be fixed to the floor by opening the signs marked on the base.
ucti
Maint
on
ALL
55645a
App
als
cat
M at
e ri
io n
li
MATERIAL
SPINDLE
L L2
TYPE
M
mm mm ANTI-SLIP
STANDARD
WITH RUBBER
171 115 LA123H-02B-PM16L170 LA123H-02B-PM16L170R
M16
251 195 LA123H-02B-PM16L250 LA123H-02B-PM16L250R
Zinc Plated Steel
L2
171 115 LA123H-02B-SM16L170 LA123H-02B-SM16L170R
M16 201 145 LA123H-02B-SM16L200 LA123H-02B-SM16L200R
Stainless Steel AISI 304
L
141 85 LA123H-02B-SM20L140 LA123H-02B-SM20L140R 2B 19
171 115 LA123H-02B-SM20L170 LA123H-02B-SM20L170R
M20
201 145 LA123H-02B-SM20L200 LA123H-02B-SM20L200R 25.000 Ø10,5
45
251 195 LA123H-02B-SM20L250 LA123H-02B-SM20L250R
17
146 85 LA123H-02B-SM24L145 LA123H-02B-SM24L145R
176 115 LA123H-02B-SM24L175 LA123H-02B-SM24L175R
3
M24 2C 24 Ø 91
206 145 LA123H-02B-SM24L205 LA123H-02B-SM24L205R
Ø 123
256 195 LA123H-02B-SM24L255 LA123H-02B-SM24L255R
Base: Reinforced polyamide.
PA.FE Polyamide with Steel Insert
Ø 24,5 mm
RPAD12208
Ø 19 mm
Characteristics:
The foot can be fixed to the floor by opening the signs marked on the base.
MATERIAL
SPINDLE
SPINDLE
L L2 ITEM DESCRIPTION
TYPE
M
mm mm ASSEMBLED
100 70 LA120E-02B-PM16L100
M16 13 18.000
Plated Steel
M16 13 18.000
190 160 LA120E-02B-SM16L190
AISI 304
LA120E-02B-SM20L145
M20 190 160 LA120E-02B-SM20L190 16 20.000
L
Ø 90
SPINDLE TYPE ANTI-SLIP PAD
Ø 120
15A 15B Item description:
Ø 14,5 mm
RPAD11207
Revision 001
Ø 19 mm
55 shore hardness.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
Characteristics:
on
ALL
55660a
The foot can be fixed to the floor by opening the signs marked on the base.
App
als
cat
M at
e ri
io n
li
MATERIAL
SPINDLE
L L2
TYPE
M
mm mm ANTI-SLIP
STANDARD
WITH RUBBER
156 98 LAF123H-02B-PM16L155 LAF123H-02B-PM16L155R
M16
206 148 LAF123H-02B-PM16L205 LAF123H-02B-PM16L205R
Zinc Plated Steel
M
156 98 LAF123H-02B-PM20L155 LAF123H-02B-PM20L155R 22
6B 30.000
M20 212 154 LAF123H-02B-PM20L210 LAF123H-02B-PM20L210R
L2
256 198 LAF123H-02B-PM20L255 LAF123H-02B-PM20L255R
L
156 98 LAF123H-02B-SM20L155 LAF123H-02B-SM20L155R
Stainless Steel
AISI 304
49
19
M24 206 148 LAF123H-02B-SM24L206 LAF123H-02B-SM24L206R 24
3
Base: Reinforced polyamide. Ø 91
Ø 123
Characteristics:
The foot can be fixed to the floor by opening the signs marked on the base.
MATERIAL
SPINDLE
L L2
TYPE
M
mm mm ANTI-SLIP
STANDARD
WITH RUBBER
M20 203 135 LAX123H-02B-PM20L205 LAX123H-02B-PM20L205R 7 24
Zinc Plated
Steel
8°
AISI 304
Ø 12,5
49
19
Ø 91
Ø 123
Ø 28 mm
e Co
nanc nstr
ucti
Maint
on
ALL
55675a
App
als
cat
M at
e ri
io n
li
8° 8°
H L L2
ØD M ITEM DESCRIPTION
mm mm mm M M
75 53 LSS50-SM10L75
M10 7
125 103 LSS50-SM10L125
95 78 LSS50-SM12L95
L2
L2
M12 9
50 21 3.000 155 138 LSS50-SM12L155
L
100 78 LSS50-SM16L100
M16 13 140 118 LSS50-SM16L150
H
210 188 LSS50-SM16L210
75 53 LSS75-SM10L75
M10 7
125 103 LSS75-SM10L125
100 78 LSS75-SM12L100
ØD
ØD
M12 9
160 138 LSS75-SM12L160
75 23 8.000
M14 11 160 138 LSS75-SM14L160
100 78 LSS75-SM16L100
M16 13 140 118 LSS75-SM16L140 I
210 188 LSS75-SM16L210
Material, spindle and washer: Stainless Steel AISI 304
Base: Stainless Steel AISI 304 + vulcanized rubber.
105 78 LSS100-SM16L105 Rubber: 70 shore hardness.
M16 13 145 118 LSS100-SM16L145
215 188 LSS100-SM16L215
100 30 20.000 155 123 LSS100-SM20L155
M20 16
230 198 LSS100-SM20L230
165 133 LSS100-SM24L165
M24 19
205 173 LSS100-SM24L205
110 78 LSS125-SM16L110
M16 13 150 118 LSS125-SM16L150
220 188 LSS125-SM16L220
125 32 30.000 155 123 LSS125-SM20L155
M20 16
230 198 LSS125-SM20L230
165 133 LSS125-SM24L165
M24 19
205 173 LSS125-SM24L205
8° 8°
M M
I H L L2
ØD M ITEM DESCRIPTION
mm mm mm mm
L2
L2
75 53 LSS75-01-SM10L75
M10 7
125 103 LSS75-01-SM10L125
L
100 78 LSS75-01-SM12L100
M12 9
75 52.5 23 8.000 160 138 LSS75-01-SM12L160
6
H
100 78 LSS75-01-SM16L100
M16 13 140 118 LSS75-01-SM16L140
210 188 LSS75-01-SM16L210
Ø15
ØD
ØD
I H L L2
ØD M ITEM DESCRIPTION
mm mm mm mm
105 78 LSS100-01-SM16L105
I With fixing hole
M16 13 145 118 LSS100-01-SM16L145
215 188 LSS100-01-SM16L215
100 65 30 20.000 155 123 LSS100-01-SM20L155
M20 16 Material, spindle and washer: Stainless Steel AISI 304
230 198 LSS100-01-SM20L230
Revision 001
165 133 LSS100-01-SM24L165 Base: Stainless Steel AISI 304 + vulcanized rubber.
M24 19
205 173 LSS100-01-SM24L205 Rubber: 70 shore hardness.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
Material, spindle and washer: Stainless Steel AISI 304 nanc nstr
ucti
Maint
on
Base: Stainless Steel AISI 304 + vulcanized rubber. ALL
55690a
App
als
Rubber: 55 shore hardness. cat
M at
e ri
io n
li
8° 8°
M M
H L L1 L2 B ITEM DESCRIPTION
ØD M
mm mm mm mm mm ASSEMBLED
L2
L2
75 23 8.000 M20 235 210 130 85 LSSC75-SM20L235
M24 185 160 110 55 LSSC75-SM24L185
L1
L1
2 2
B
L
L
1 1
H L L1 L2 B ITEM DESCRIPTION
ØD M
mm mm mm mm mm ASSEMBLED
H
100 30 20.000 M20 240 210 130 85 LSSC100-SM20L240
M24 190 160 110 55 LSSC100-SM24L190
M
1 mm 2 mm
ØD
ØD
H L L1 L2 B ITEM DESCRIPTION M16 13 19
ØD M
mm mm mm mm mm ASSEMBLED
M20 16 24
M16 245 210 130 85 LSSC125-SM16L245 M24 19 27
125 32 30.000 M20 245 210 130 85 LSSC125-SM20L245
M24 195 160 110 55 LSSC125-SM24L195
I
8° 8°
I H L L1 L2 B
M M
ØD M ITEM DESCRIPTION
mm mm mm mm mm mm
L2
L1
2 2
B
B
L
1 1
I H L L1 L2 B
ØD M ITEM DESCRIPTION
mm mm mm mm mm mm
A MIN A MAX
ØD
ØD
L1 =160
56,6 95,4
B =55
L1 =210
Revision 001
45,6 114,5
B =85
I
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
55705a
App
als
cat
M at
L2
e ri
L2
io n
li
Ø12,5
17
17
ØD Ø
ØD
MATERIAL
MATERIAL
SPINDLE
SPINDLE
SPINDLE
SPINDLE
& BASE
& BASE
L2 ØI L2
TYPE
TYPE
M ITEM DESCRIPTION M ITEM DESCRIPTION
mm mm mm
50 18.000
Zinc
AISI 304
M16 20 50 18.000
135 LMP80H-SM16L165 7 M20 135 LMP80H-02-SM20L165 24
AISI 304
MATERIAL
SPINDLE
SPINDLE
SPINDLE
SPINDLE
& BASE
& BASE
L2 ITEM DESCRIPTION ØI L2
TYPE
TYPE
M M ITEM DESCRIPTION
mm ASSEMBLED mm mm
85 26.000
M24 125 LMP125-PM24L155 19 125 LMP125-02-PM24L155
8 M24 19
M30 185 LMP125-PM30L215 24 185 LMP125-02-PM24L215 8
115 LMP125H-SM16L145 M30 185 LMP125-02-PM30L215 24
M16 20
Stainless Steel
Stainless Steel
Ø 28 mm
8° 8°
e Co
M M nanc nstr
ucti
Maint
on
ALL
55720a
App
als
cat
M at
e ri
L2
io n
L2
li
Ød
H
H
3
Ø
ØD
ØD
Characteristics:
The foot can be fixed to the floor.
Version with zinc plated steel spindles have yellow painted base plates. Version with zinc plated steel spindles have yellow painted base plates.
MATERIAL
MATERIAL
SPINDLE
SPINDLE
SPINDLE
& BASE
& BASE
L2 ØI ØD H L2
TYPE
TYPE
M H ITEM DESCRIPTION M ITEM DESCRIPTION
mm mm mm mm mm
M16 20 M16 20
135 LMM80H-PM16L175 135 LMM80H-02-SM16L175 7
7
115 LMM80H-PM20L155 M20 135 LMM80H-02-SM20L175 24
304
135 LMM80H-SM16L175
7
115 LMM80H-SM20L155
M20 24
304
SPINDLE
SPINDLE
SPINDLE
SPINDLE
& BASE
& BASE
L2 ØI L2
TYPE
TYPE
M30 24
185 LMM120-PM30L230 115 LMM120H-02-SM20L160 7
M20 24
115 LMM120H-SM16L160 135 LMM120H-02-SM20L180
M16 20
Stainless Steel AISI
304
Ø 28 mm
e Co
VERSION WITH 4 HOLES nanc nstr
ucti
Maint
on
8°
ALL
55735a
App
als
M cat
M at
e ri
io n
li
L2
L
Ø9
30
S
Ø 99
Ø 123,5
MATERIAL
SPINDLE
SPINDLE
& BASE
L L2
TYPE
M S ITEM DESCRIPTION
mm mm
7
160 115 LMPH123H-04-PM20L160
20 24
180 135 4 LMPH123H-04-PM20L180 10.000
170 125 LMPH123-04-PM24L170
24 19
230 185 LMPH123-04-PM24L230 8
30 230 185 LMPH123-04-PM30L230 24
155 115 LMPH123H-04-SM16L155
Stainless Steel AISI
16 20
175 135 LMPH123H-04-SM16L175
7
160 115 LMPH123H-04-SM20L160
304
20 3 24 6.000
180 135 LMPH123H-04-SM20L180
24 170 125 LMPH123-04-SM24L170 19
8
30 170 125 LMPH123-04-SM30L170 24
SPINDLE TYPE
7 8
Ø 28 mm
Ø 28 mm
d Ø H D ITEM
mm mm mm DESCRIPTION
H
e Co
nanc nstr
ucti
Maint
on
ALL
55750a
App
als
cat
M at
e ri
io n
li
L
Ø 30 18
Ø 40
Ø 50
MATERIAL
MATERIAL
SPINDLE
SPINDLE
SPINDLE
SPINDLE
L L
TYPE
TYPE
M ITEM DESCRIPTION M ITEM DESCRIPTION
mm mm
Zinc Plated Steel
55 LFM30-PM8L55 M8 55 LFM50-PM8L55
Plated Steel
M8
75 LFM30-PM8L75 M10 75 LFM50-PM10L75
Zinc
9 5.000 9 9.000
55 LFM30-PM10L55 55 LFM50-PM12L55
M10 M12
75 LFM30-PM10L75 75 LFM50-PM12L75
55 LFM30-SM8L55 M8 75 LFM50-SM8L75
Stainless Steel
Stainless Steel
M8
AISI 304
AISI 304
75 LFM30-SM8L75 55 LFM50-SM10L55
9 5.000 M10 9 9.000
55 LFM30-SM10L55 75 LFM50-SM10L75
M10
75 LFM30-SM10L75 M12 75 LFM50-SM12L75
SPINDLE
L
TYPE
M ITEM DESCRIPTION
mm
Zinc Plated Steel
M8 55 LFM40-PM8L55
55 LFM40-PM10L55
M10 9 7.000
75 LFM40-PM10L75
M12 75 LFM40-PM12L75
M8 55 LFM40-SM8L55
Stainless Steel
55 LFM40-SM10L55
AISI 304
M10
75 LFM40-SM10L75 9 7.000
55 LFM40-SM12L55
M12
75 LFM40-SM12L75
Base: Polyethylene.
SPINDLE TYPE
9
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 C0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
S
L
www.SystemPlastSmartGuide.com
e Co
A nanc nstr
C 1
TYPE
ucti
Maint
B
on
ALL
55765a
App
als
cat
M at
e ri
io n
li
S
C
L
ROUND TUBES MAX.STATIC LOAD
A
S
L
TYPE 2 Ø MM 30 38 42 48 50 60
B
N 3.000 5.000 6.000 6.000 6.500 8.000
Stated load values are meant for static conditions.
Such values have to be adequately reduced in presence of high
A
frequency vibrations or dynamic loads. To contact your local Technical
B Support check our website: www.systemplast.com or send an email to
SystemPlastTechSupport@RegalBeloit.com
Material:
Polyamide; threaded bush in nickel plated brass.
EXTER- INTER-
THICKNESS
TUBE MM
B C L S
TYPE
mm mm mm mm
DIAMETER MM M10 M12 M14 M16 M20
C
SQUARE TUBES MAX.STATIC LOAD
mm 25 30 35 38 40 50 60
S
L
Material:
Polyamide; threaded bush in nickel plated brass.
THICKNESS
B C L S
mm mm mm mm
DIAMETER MM M8 M10 M12 M14 M16 M20
5 5 7 6 5 c WELDED ENDPLATES
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
55765c
App
als
cat
M at
e ri
io n
li
A1
S
A M
Welding
A A1 S
M ITEM DESCRIPTION
mm mm mm
M12 TWP-S4030-M12
M16 40 40 TWP-S4030-M16
3
M20 TWP-S4030-M20
M16 50 50 TWP-S5030-M16
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
ALL
55780a
L2
App
als
cat
M at
e ri
io n
li
L
19
MATERIAL
SPINDLE
15°
Zinc Plated
22.000
M16 97 70 LA80S-PM16L95 15A 13
L2
97 70 LA80SH-SM12L95
M12 2A 14
Stainless Steel
L
152 125 LA80SH-SM12L150
AISI 304
22.000
97 70 LA80S-SM16L95
19
M16 15A 13
147 120 LA80S-SM16L145 Ø 80
L L2 SPINDLE
M ITEM DESCRIPTION
mm mm TYPE
Zinc Plated
15°
Steel
AISI 304
Steel
L2
99 69 LA80S-02-SM16L100 22.000
M16 15A 13
149 119 LA80S-02-SM16L150
L
Ø9
16,5
19
Ø 56
Ø 80
SPINDLE TYPE
2A 15A
For standard version, go to:
Ø 14,5 mm
Ø 15 mm
5 5 5 7 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
8°
ucti
Maint
on
M ALL
55795a
App
als
cat
M at
e ri
io n
li
L2
L
Ø12,5
25,5
Ø 74
Ø 102
3,5
Characteristics:
The foot can be fixed to the floor by opening the signs marked on the base.
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
mm mm STANDARD ANTI-SLIP
WITHOUT RUBBER WITH RUBBER
156,5 115 LAX102H-02B-PM16L150 -
Zinc Plated
M16 20
Steel
M16 20
AISI 304
RPAD9308
Anti-slip pad: oil resistant rubber,
55 shore hardness.
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
ucti
Maint
on
ALL
55810a
App
als
Solid base series cat
M at
e ri
io n
li
The solid base will help equipment builders meet the requirements of the USDA
and other government agencies, related to the prevention of contamination of food
products and the growth of bacteria.
Characteristics:
The foot can be fixed to the floor.
MATERIAL
SPINDLE
SPINDLE
L L2 15°
TYPE
M ITEM DESCRIPTION
mm mm
M
Zinc Plated Steel
L2
M20 24 25.000
182 145 LA100SH-02-PM20L180
L
M24 190 145 LA100SH-02-PM24L190 2C
97 60 LA100SH-02-SM16L95 Ø12,5
M16
Stainless Steel
2B
26
22
152 115 LA100SH-02-SM20L150 24 25.000
M20
232 195 LA100SH-02-SM20L230 Ø 75
M24 190 145 LA100SH-02-SM24L190 2C
Ø 100
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
mm mm STANDARD ANTI-SLIP
WITHOUT RUBBER WITH RUBBER
M16 182 135 LAX100H-02-PM16L180 LAX100H-02-PM16L180R 20
Zinc Plated
7
M20 182 135 LAX100H-02-PM20L180 - 24
Steel
25.000
M24 232 185 LAX100-02-PM24L185 LAX100-02-PM24L185R 19
8 8°
M30 172 125 LAX100-02-PM30L170 LAX100-02-PM30L170R 24
162 115 LAX100H-02-SM16L160 - M
Stainless Steel
M16 19
182 135 LAX100H-02-SM16L180 LAX100H-02-SM16L180R 7
AISI 304
8
M30 232 185 LAX100-02-SM30L185 LAX100-02-SM30L185R 24
Base: Reinforced polyamide.
L
Ø11,5
34
24,5
Ø 73
4
Ø 100
Ø 24,5 mm
Ø 28 mm
Ø 28 mm
Ø 19 mm
e Co
nanc nstr
ucti
Maint
on
ALL
55825a
App
als
15° cat
M at
e ri
io n
li
M
L2
L
28
3
Ø 100
ITEM DESCRIPTION
MATERIAL
SPINDLE
SPINDLE
L L2 ASSEMBLED
TYPE
M
mm mm STANDARD ANTI-SLIP
WITHOUT RUBBER WITH RUBBER
99 60 - LA100H-PM16L100R
Zinc Plated Steel
M16
154 115 LA100H-SM16L155 LA100H-SM16L155R
154 115 LA100H-SM20L155 LA100H-SM20L155R 2B 20
304
18.000
M20 184 145 LA100H-SM20L185 LA100H-SM20L185R
234 195 LA100H-SM20L235 LA100H-SM20L235R
M24 190 145 LA100H-SM24L190 LA100H-SM24L190R 2C 24
Base: Reinforced polyamide.
Ø 24,5 mm
Ø 19 mm
e Co
nanc nstr
ucti
Maint
on
ALL
55840a
App
als
cat
M at
e ri
io n
li
Characteristics:
The foot can be fixed to the floor.
M
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
mm mm STANDARD ANTI-SLIP
L2
WITHOUT RUBBER WITH RUBBER
M16 153 98 LAF123H-02-PM16L155 LAF123H-02-PM16L155R
Zinc Plated Steel
22
M20 209 154 LAF123H-02-PM20L210 LAF123H-02-PM20L210R
L
6B 35.000
M24 253 198 LAF123H-02-PM24L255 LAF123H-02-PM24L255R 24
Ø12,5
M30 253 198 LAF123H-02-PM30L255 - 30
46
20,5
Stainless Steel
153 98 LAF123H-02-SM20L155 -
AISI 304
M20 22
3
203 148 LAF123H-02-SM20L205 - 6B 35.000 Ø 98,5
Ø 123
M24 203 148 LAF123H-02-SM24L205 LAF123H-02-SM24L205R 24
Characteristics: 8°
The foot can be fixed to the floor. M
MATERIAL
ITEM DESCRIPTION
SPINDLE
SPINDLE
L L2
TYPE
M
L2
mm mm STANDARD ANTI-SLIP
WITHOUT RUBBER WITH RUBBER
Zinc Plated Steel
20,5
Ø 28 mm
SKWEZLOC®
SHAFT GRUB ECCENTRIC SKWEZLOC®
TYPE PN GOLDTM
DIAMETER SCREWS RING SHAFT LOCK
SHAFT LOCK
Ø 12 - Ø 19 5 6 0 3 0 a - - -
UCFL
UCFH
Ø 20 - Ø 40 5 6 0 2 0 a 5 6 0 4 0 a - -
TRIATHLON® UCFH Ø 30 - Ø 40 - - -
BEARING 5 6 0 4 2 a
CRFTS-
PN GOLD™ Ø 30 - Ø 40 - - -
PN 5 6 0 4 4 a
BEARING
CL Ø 30 - Ø 40 5 6 0 9 0 a 5 6 0 9 0 a - -
Ø 12 - Ø 19 5 6 0 6 0 a - - -
UCF
UCFQ
Ø 20 - Ø 40 5 6 0 5 0 a 5 6 0 7 0 a - -
TRIATHLON® UCFQ Ø 30 - Ø 40 - - -
BEARING 5 6 0 7 2 a
PN GOLD™ CRFS-PN Ø 30 - Ø 40 - - -
BEARING
5 6 0 7 4 a
CS Ø 30 - Ø 40 5 6 1 0 0 a 5 6 1 0 0 a - -
OTHER VERSIONS: 5 6 0 1 0 b
SKWEZLOC®
SHAFT GRUB ECCENTRIC SKWEZLOC®
TYPE PN GOLDTM
DIAMETER SCREWS RING SHAFT LOCK
SHAFT LOCK
UCP Ø 20 - Ø 40 5 6 1 1 0 a 5 6 1 1 0 a - -
UCPA Ø 20 - Ø 30 5 6 1 2 0 a 5 6 1 2 0 a - -
SQL Ø 12 - Ø 20 5 6 1 3 0 a 5 6 1 3 0 a - -
UCFB Ø 20 - Ø 30 5 6 1 4 0 a 5 6 1 4 0 a - -
UCHE Ø 20 - Ø 35 5 6 1 5 0 a 5 6 1 5 0 a - -
UCT Ø 20 - Ø 35 5 6 1 6 0 a 5 6 1 6 0 a - -
UCTT Ø 20 - Ø 35 5 6 1 7 0 a 5 6 1 7 0 a - -
OTHER VERSIONS: 5 6 0 1 0 a
e
eccentric ring, go to: shaft diameters. Go to:
ucti
Maint
Shaft Lock with
on
ALL
5 6 0 4 0 a 5 6 0 3 0 a
56020a
grub screw
App
als
cat
M at
e ri
io n
li
For new Sealmaster® For new Sealmaster® Skwezloc®
Skwezloc® bearings, go to: PN GOLDTM bearings, go to:
5 6 0 4 2 a 5 6 0 4 4 a
Z
J
TECHNICAL INFORMATION
- Types UFL and UCFH have solid polyamide housings for ultimate strength,no trap
for contamination ( UCFL types have a ribbed back).
- Good resistance against many corrosive chemicals such as water, oils, greases,
petrol, milk, wine, alcoholic beverages.
- Available
Ø in chrome steel and stainless steel
Ø (suitable for food, beverage and
C
A
pharmaceutical industry).
- Housings also available as complete sealed units for improved protection (wash
down resistant version).
- Max. mis-alignment between shaft and housing: 2.5°
Grub
screws
COMPONENTS ØØ Ø ØØ Ø
C
A
C
A
C
A
130
40 45 11 67 69 35 UCFLX208-40M UCFLX208-40M-SS 50002 50002APE UCFLX208-40M-CEC UCFLX208-40M-OEC
40 144 43 9 63 65 35 UCFH208-40M UCFH208-40M-SS 50002 50002APE UCFH208-40M-CEC UCFH208-40M-OEC
ucti
Maint
on
ALL
56030a
App
als
cat
M at
e ri
io n
li
Also available for 20-40 mm
shaft diameters. Go to:
5 6 0 2 0 a
TECHNICAL INFORMATION
- Types UFL have solid polyamide housings for ultimate strength, no trap for contamination.
- Good resistance against many corrosive chemicals such as water, oils, greases, petrol, milk,
wine, alcoholic beverages.
Shaft lock with - Housings also available as complete sealed units for improved protection (wash down resistant
grub screw version).
- Max. mis-alignment between shaft and housing: 2.5°
Z
J WEIGHT
A B C F J
KG(IND.)
76,5 11 100 56 12 0,18
Z Z Z
J J J
B Ta U
F T Grub V
Screws
Ø Ø Ø Ø Ø Ø
C
A
C
A
C
A
COMPONENTS
Housing in reinforced polyamide. Seals in
NBR rubber. High precision self-aligning B B B Ta U
Ta Ta U U
ball bearings in chrome- or stainless steel, F F F
pre-lubricated. Grease nipples and spacers T T T V V V
from nickel plated brass. Washers (where
used) in AISI 304 (DIN 1.4301). Safety cap in STANDARD VERSIONS WASH DOWN RESISTANT VERSION
polypropylene.
(When fitted with a stainless steel bearing, BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
the grease nipple is in stainless steel). CLOSED OPEN
CHROME STEEL SAFETY SAFETY CLOSED CAP OPEN CAP
CAP CAP
SHAFT
A T Ta U V Z ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
12 UCFH201-12M UCFH201-12M-CEC UCFH201-12M-OEC
15 UCFH202-15M UCFH202-15M-CEC UCFH202-15M-OEC
76,5 32,5 10,5 47 49 26 50008 50008APE
16 UCFH016-16M UCFH016-16M-CEC UCFH016-16M-OEC
17 UCFH203-17M UCFH203-17M-CEC UCFH203-17M-OEC
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5 6 0supports
Bearing 1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
shaft diameters. Go to:
ucti
Maint
on
5 6 0 2 0 a ALL
5 6 0 3 0 a
56040a
App
als
cat
M at
e ri
io n
li
For new Sealmaster® For new Sealmaster® Skwezloc®
Skwezloc® bearings, go to: PN GOLDTM bearings, go to: Shaft lock with
5 6 0 4 2 a 5 6 0 4 4 a eccentric ring
Z
J
TECHNICAL INFORMATION
- Types UFL and UCFH have solid polyamide housings for ultimate strength, no trap for
contamination (UCFL types have a ribbed back).
- Good resistance against many corrosive chemicals such as water, oils, greases, petrol, milk,
wine, alcoholic beverages.
- Available in chrome steel and stainless steel (suitable for food, beverage and pharmaceutical
industry).
Ø Ø units for improved protection (wash down
C
A
Z Z Z
Detail UFL
J J J
Eccentric
Ring
Ø Ø Ø Ø Ø Ø
COMPONENTS
Housing in reinforced polyamide. Seals in
NBR rubber. High precision self-aligning
ball bearings in chrome- or stainless
steel, pre-lubricated. Grease nipples Ta Ta Ta U U U
and spacers from nickel plated brass. T T T V V V
Washers (where used) in AISI 304 (DIN
1.4301). STANDARD VERSION WASH DOWN RESISTANT VERSION
Safety cap in polypropylene. (When fitted
with a stainless steel bearing, the grease BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
nipple is in stainless steel). CHROME STEEL CLOSED OPEN
CLOSED CAP OPEN CAP
SAFETY SAFETY
CAP CAP
SHAFT
A T Ta U V Z ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 76,5 39 8,5 47 49 26 UFLX204-20ME 50008 50008APE UFLX204-20ME-CEC UFLX204-20ME-OEC
20 39,4 8,5 48 50 26 UCFH204-20ME 50007 50007APE UCFH204-20ME-CEC UCFH204-20ME-OEC
25 90 38,4 7,5 52 54 25 UCFLX205-25ME 50003A 50003AAPE UCFLX205-25ME-CEC UCFLX205-25ME-OEC
30 40,7 5 52 54 25 UCFLXX206-30ME 50003A 50003AAPE UCFLXX206-30ME-CEC UCFLXX206-30ME-OEC
25 40,4 9,5 52 54 29 UCFH205-25ME 50011 50011APE UCFH205-25ME-CEC UCFH205-25ME-OEC
99
30 40,7 5 52 54 25 UCFLX206-30ME 50003A 50003AAPE UCFLX206-30ME-CEC UCFLX206-30ME-OEC
30 42,2 6,5 51 53 29 * UCFH206-30ME 50001 50001APE * UCFH206-30ME-CEC * UCFH206-30ME-OEC
35 117 49,4 10,5 67 69 35 UCFLX207-35ME 50002 50002APE UCFLX207-35ME-CEC UCFLX207-35ME-OEC
40 53,7 10 67 69 35 * UCFLXX208-40ME 50002 50002APE * UCFLXX208-40ME-CEC * UCFLXX208-40ME-OEC
35 48,4 9,5 64 66 33 UCFH207-35ME 50004 50004APE UCFH207-35ME-CEC UCFH207-35ME-OEC
Revision 001
130
40 54,7 11 67 69 35 UCFLX208-40ME 50002 50002APE UCFLX208-40ME-CEC UCFLX208-40ME-OEC
40 144 52,7 9 63 65 35 UCFH208-40ME 50002 50002APE UCFH208-40ME-CEC UCFH208-40ME-OEC
ucti
Maint
For shaft lock with
on
grub screw, go to: ALL
56042a
App
als
5 6 0 2 0 a cat
M at
e ri
io n
li
For shaft lock with
eccentric ring, go to:
5 6 0 4 0 a
Z
14
FEATURES AND BENEFITS
- High Phosphorous Nickel Plated Bearing Inner & Outer Ring for exceptional corrosion resistance.
- High Performance Triple Lip Seal to minimize contamination ingress and retain lubrication.
- Locking collar centers the shaft in the bearing bore and secures the shaft with near perfect
concentricity.
- Reduced Bolt Hole Spacing to replace OEM compact conveyor designs with 30mm and 40mm shaft
148
117
Ø diameters. Ø Ø
- Durable polyamide housing with corrosion resistant bolt hole spacers.
- Securely fastened snap in end cap to further protect bearing with drain hole to prevent liquid build up
inside.
- Lubed for Life design with Tapered Land Outer ring race profile to direct lubrication into the ball path.
- Max. mis-alignment between shaft and housing: 2°
11 U
Ta
F T V
COMPONENTS
Housing in reinforced polyamide light grey. High precision self-aligning ball bearings in hardened
corrosion resistant steel. Spacers in nickel plated brass. Safety cap in polypropylene (transparent-yellow).
SHAFT
T Ta U V Z F
Ø
30 41,2 2 51 53 33 80
40 46,7 2 67 69 35 103
Z Z
14 14
Torx® key T25
Skwezloc®
shaft lock
148
148
117
117
Ø Ø Ø Ø Ø Ø
11 11 U U
Ta Ta
F F T T V V
ucti
Maint
For shaft lock with
on
grub screw, go to: ALL
56044a
App
als
5 6 0 2 0 a cat
M at
e ri
io n
li
For shaft lock with
eccentric ring, go to:
5 6 0 4 0 a
For new Sealmaster®
Skwezloc® bearings, go to:
Torx® key T25
5 6 0 4 2 a Skwezloc® PN GOLDTM
shaft lock
Z
2,5
FEATURES AND BENEFITS
Sealmaster PN GOLDTM mounted bearings feature high phosphorus, electroless nickel coated steel insert
with patented seal technology available in either setscrew or SKWEZLOC® concentric locking collar,
316 stainless casting and high strength housing configurations. The high performance triple lip seal is the
latest innovation of over 10 patents on sealing technology. The combination of stainless flingers and FKM
lip materials provide a strong contaminant resistance andØ GoldPlex FG (USDA H1) food grade grease
117
®
Ø Ø
C
loss. Specially engineered for industries with corrosive wash down environments such as food and
beverage, pharmaceuticals and chemical processing. PN GOLD mounted ball bearings provide
outstanding performance in demanding corrosive environments.
COMPONENTS
11 Bearing
Ta Housing Material: 316 PassivatedUstainless steel
Bearing V
F T Insert Material: High phosphorus electroless nickel coated steel
Seal Material: High performance triple lip seal
Self Alignment: +/- 2°
Lock Type: Skwezloc concentric locking collar
Temperature: -29° to 104° C (-20° to 220° F)
Grease: Sealmaster GoldPlex-FG
End cap in stainless steel (bolts included) - must be ordered separately
SHAFT
T Ta U V Z F C
Ø
30 39,6 1,6 45,3 46,5 29 82,6 141
40 44,4 1,6 53,2 54,4 32,3 105,6 157
Ø Ø Ø
C
11 U
Ta V
F T
e
eccentric ring, go to: shaft diameters. Go to:
ucti
Maint
Shaft lock with
on
ALL
5 6 0 7 0 a 5 6 0 6 0 a
56050a
grub screw
App
als
cat
M at
e ri
io n
li
For new Sealmaster® For new Sealmaster® Skwezloc®
Skwezloc® bearings, go to: PN GOLDTM bearings, go to:
5 6 0 7 2 a 5 6 0 7 4 a
Z
J
C C TECHNICAL INFORMATION
- Type UCFQ has a solid polyamide housing for ultimate strength, no trap for contamination.
(UCF type has a ribbed back).
B A B AØ Ø
- Good resistance against many corrosive chemicals such as water, oils, greases, petrol, milk,
wine, alcoholic beverages.
- Available in chrome steel and stainless steel (suitable for food, beverage and pharmaceutical
A Ta
A U industry).
B T V
B
- Housings also available as complete sealed units for improved protection (wash down
Type A: Type B:
resistant version).
Flat bearing with Flat bearing with
- Max. mis-alignment between shaft and housing: 2.5°
grease nipple grease nipple VERSION UCFQ VERSION UCFX, UCFZ, UCFF AND UCFXX
WEIGHT
(angle 25°) and ribs. (horizontal 0°). A C
KG (IND.) B J B J
63,5 11 0,2 86 10 86 19
70 11 0,3 95 12,5 98 19
77 11 - - - 110 25
82,5 11 0,5 108 12,5 110 25
92 14 0,6 118 16 118 25
Detail UCFX 101,5 14 0,8 130 16 130 25
UCFXX-UCFZ
(back) VERSION WITH GRUB SCREWS
Detail UCFQ Z Z Z
(back) J J J
Grub
C screws
C C Type B Type B
COMPONENTS B AB A B A Ø Ø Ø Ø Ø Ø
Housing in reinforced polyamide.
Seals in NBR rubber. High precision
self-aligning ball bearings in chrome
or stainless steel, pre-lubricated.
Grease nipples and spacers from A A A Ta Ta Ta U U U
nickel plated brass. Washers (where B B B T T T V V V
used) in AISI 304 (DIN 1.4301).
Safety cap in polypropylene. Type A Type A
(When fitted with a stainless steel STANDARD VERSION WASH DOWN RESISTANT VERSION
bearing, the grease nipple is in
stainless steel). BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
CLOSED OPEN
CHROME STEEL STAINLESS STEEL CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
TYPE A T Ta U V Z ITEM DESCRIPTION ITEM DESCRIPTION
Ø PART NO. PART NO.
20 A 63,5 33,5 8,5 48 50 26 UCFQ204-20M UCFQ204-20M-SS 50007 50007APE UCFQ204-20M-CEC UCFQ204-20M-OEC
25 B 63 34,5 7,5 50 52 34,5 UCFX205-25M UCFX205-25M-SS 50003A 50003AAPE UCFX205-25M-CEC UCFX205-25M-OEC
20 B 34 9 50 52 25 UCFZ204-20M UCFZ204-20M-SS 50003A 50003AAPE UCFZ204-20M-CEC UCFZ204-20M-OEC
70
25 A 36,5 9,5 52 54 29 UCFQ205-25M UCFQ205-25M-SS 50011 50011APE UCFQ205-25M-CEC UCFQ205-25M-OEC
30 B 46 14 68 70 36 UCFX206-30M UCFX206-30M-SS 50004 50004APE UCFX206-30M-CEC UCFX206-30M-OEC
77
40 B 44 10 68 70 36 UCFXXX208-40M UCFXXX208-40M-SS 50004 50004APE UCFXXX208-40M-CEC UCFXXX208-40M-OEC
25 B 38,5 11,5 53 55 31 UCFZ205-25M UCFZ205-25M-SS 50001 50001APE UCFZ205-25M-CEC UCFZ205-25M-OEC
30 A 36,5 6,5 51 53 29 * UCFQ206-30M UCFQ206-30M-SS 50001 50001APE * UCFQ206-30M-CEC * UCFQ206-30M-OEC
82,5
35 B 43,5 11,5 67 69 35 UCFX207-35M UCFX207-35M-SS 50002 50002APE UCFX207-35M-CEC UCFX207-35M-OEC
40 B 45 11 67 69 35 * UCFXX208-40M UCFXX208-40M-SS 50002 50002APE * UCFXX208-40M-CEC * UCFXX208-40M-OEC
35 A 41,5 9,5 64 66 33 UCFQ207-35M UCFQ207-35M-SS 50004 50004APE UCFQ207-35M-CEC UCFQ207-35M-OEC
Revision 001
92
40 B 45 11 67 69 35 UCFX208-40M UCFX208-40M-SS 50002 50002APE UCFX208-40M-CEC UCFX208-40M-OEC
40 A 101,5 43 9 63 65 35 UCFQ208-40M UCFQ208-40M-SS 50002 50002APE UCFQ208-40M-CEC UCFQ208-40M-OEC
ucti
Maint
on
ALL
56060a
App
als
cat
M at
e ri
io n
li
Also available for 20-40 mm
shaft diameters. Go to:
ZShaft lock with
5 6 0 5 0 a grub screw
J
C
TECHNICAL INFORMATION
- Type UCFQ has a solid polyamide housing for ultimate strength; no trap for
contamination.
- Good resistance against many corrosive chemicals such as water, oils,
B A greases, Ø
Ø petrol, milk, wine, alcoholic beverages. Ø
- Housings also available as complete sealed units for improved protection
(wash down resistant version).
- Max. mis-alignment between shaft and housing: 2.5°
A WEIGHT
A B Ta C J U
KG(IND.)
B
54 76 T 11 10 0,18 V
Detail UCFQ
Z Z
(back)
J J
C
Grub C
screws
COMPONENTS B A B A Ø Ø Ø Ø Ø Ø
Housing in reinforced polyamide.
Seals in NBR rubber. High precision
self-aligning ball bearings in chrome or
stainless steel, pre-lubricated. Grease
A A
nipples and spacers from nickel plated B B
Ta Ta U U
brass. Washers (where used) in AISI 304 T T V V
(DIN 1.4301).
Safety cap in polypropylene. STANDARD VERSION WASH DOWN RESISTANT VERSION
(When fitted with a stainless steel
BEARINGS BEARINGS CHROME STEEL
bearing, the grease nipple is in stainless SEPARATE SEPARATE
steel). STAINLESS CLOSED OPEN
CHROME STEEL SAFETY SAFETY CLOSED CAP OPEN CAP
STEEL
CAP CAP
SHAFT PART NO. PART NO.
A T Ta U V Z ITEM DESCRIPTION ITEM DESCRIPTION
Ø
12 UCFQZ201-12M - UCFQZ201-12M-CEC UCFQZ201-12M-OEC
15 47 49 UCFQZ202-15M - UCFQZ202-15M-CEC UCFQZ202-15M-OEC
54 32,5 10,5 26 50008 50008APE
16 UCFQZ016-16M - UCFQZ016-16M-CEC UCFQZ016-16M-OEC
17 47,5 49,5 UCFQZ203-17M - UCFQZ203-17M-CEC UCFQZ203-17M-OEC
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5 6 0supports
Bearing 1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e
shaft diameters. Go to:
ucti
Maint
on
5 6 0 5 0 a ALL
5 6 0 6 0 a
56070a
App
als
cat
M at
e ri
io n
li
For new Sealmaster® For new Sealmaster® Skwezloc®
Skwezloc® bearings, go to: PN GOLDTM bearings, go to: Shaft lock with
5 6 0 7 2 a 5 6 0 7 4 a eccentric ring
Z
J
C C TECHNICAL INFORMATION
- Type UCFQ has a solid polyamide housing for ultimate strength; no trap for contamination.
(UCF type has a ribbed back).
B A B AØ Ø
- Good resistance against many corrosive chemicals such as water, oils, greases, petrol, milk,
wine, alcoholic beverages.
- Available in chrome steel and stainless steel (suitable for food, beverage and pharmaceutical
A Ta
A U industry).
B T V
B - Housings also available as complete sealed units for improved protection (wash down
Type A: Type B:
resistant version).
Flat bearing with Flat bearing with
- Max. mis-alignment between shaft and housing: 2.5°
grease nipple grease nipple VERSION UCFQ VERSION UCFX, UCFZ, UCFF AND UCFXX
WEIGHT
(angle 25°) and ribs. (horizontal 0°). A C
KG (IND.) B J B J
63,5 11 0,2 86 10 86 19
70 11 0,3 95 12,5 98 19
77 11 - - - 110 25
82,5 11 0,5 108 12,5 110 25
92 14 0,6 118 16 118 25
Detail UCFX 101,5 14 0,8 130 16 130 25
UCFXX-UCFZ
(back) VERSION WITH ECCENTRIC RING
Detail UCFQ Z Z Z
(back) Eccentric J J J
ring
C C C Type B Type B
B A B A
B A Ø Ø Ø Ø Ø Ø
COMPONENTS
Housing in reinforced polyamide. Seals in
NBR rubber. High precision self-aligning
ball bearings in chrome- or stainless
steel, pre-lubricated. Grease nipples
A A A Ta Ta Ta U U U
and spacers from nickel platedB brass.B B T T T V V V
Washers (where used) in AISI 304 (DIN
1.4301). Type A Type A
Safety cap in polypropylene.
(When fitted with a stainless steel STANDARD VERSION WASH DOWN RESISTANT VERSION
bearing, the grease nipple is in stainless BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
steel). CHROME STEEL
CLOSED OPEN
CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
TYPE A T Ta U V Z ITEM DESCRIPTION ITEM DESCRIPTION
Ø PART NO. PART NO.
20 A 63,5 39,4 8,5 48 50 26 UCFQ204-20ME 50007 50007APE UCFQ204-20ME-CEC UCFQ204-20ME-OEC
25 B 63 38,4 7,5 50 52 25 UCFX205-25ME 50003A 50003AAPE UCFX205-25ME-CEC UCFX205-25ME-OEC
20 B 39,9 9 50 52 25 UCFZ204-20ME 50003A 50003AAPE UCFZ204-20ME-CEC UCFZ204-20ME-OEC
70
25 A 40,4 9,5 52 54 29 UCFQ205-25ME 50011 50011APE UCFQ205-25ME-CEC UCFQ205-25ME-OEC
30 B 49,7 14 68 70 36 UCFX206-30ME 50004 50004APE UCFX206-30ME-CEC UCFX206-30ME-OEC
77
40 B 53,7 10 68 70 36 UCFXXX208-40ME 50004 50004APE UCFXXX208-40ME-CEC UCFXXX208-40ME-OEC
25 B 42,4 11,5 53 55 31 UCFZ205-25ME 50001 50001APE UCFZ205-25ME-CEC UCFZ205-25ME-OEC
30 A 42,2 6,5 51 53 29 * UCFQ206-30ME 50001 50001APE * UCFQ206-30ME-CEC * UCFQ206-30ME-OEC
82,5
35 B 50,4 11,5 67 69 35 UCFX207-35ME 50002 50002APE UCFX207-35ME-CEC UCFX207-35ME-OEC
40 B 54,7 11 67 69 35 * UCFXX208-40ME 50002 50002APE * UCFXX208-40ME-CEC * UCFXX208-40ME-OEC
35 A 48,4 9,5 64 66 33 UCFQ207-35ME 50004 50004APE UCFQ207-35ME-CEC UCFQ207-35ME-OEC
Revision 001
92
40 B 54,7 11 67 69 35 UCFX208-40ME 50002 50002APE UCFX208-40ME-CEC UCFX208-40ME-OEC
40 A 101,5 52,7 9 63 65 35 UCFQ208-40ME 50002 50002APE UCFQ208-40ME-CEC UCFQ208-40ME-OEC
e
grub screw, go to:
ucti
Maint
on
ALL
5 6 0 5 0 a
56072a
App
als
cat
M at
e ri
io n
li
For shaft lock with
eccentric ring, go to:
5 6 0 7 0 a
Ø- Reduced Bolt Hole Spacing to replace OEM Ø compact conveyor designs with 30mm andØ40mm shaft
diameters.
- Durable polyamide housing with corrosion resistant bolt hole spacers.
- Securely fastened snap in end cap to further protect bearing with drain hole to prevent liquid build up
inside.
- Lubed for Life design with Tapered Land Outer ring race profile to direct lubrication into the ball path.
82,5 - Max. mis-alignmentTa between shaft and housing: 2° U
110 T V
COMPONENTS
Housing in reinforced polyamide light grey. High precision self-aligning ball bearings in hardened
corrosion resistant steel. Spacers in nickel plated brass. Safety cap in polypropylene (transparent-yellow).
SHAFT
T Ta U V Z
Ø
30 41,2 2 51 53 33
40 46,7 2 67 69 35
Z Z
Torx® key T25 14 14
Skwezloc®
shaft lock
11 11
82,5
110
Ø Ø Ø Ø Ø Ø
82,5 82,5 Ta U U
Ta
110 110 T T V V
e
grub screw, go to:
ucti
Maint
on
ALL
5 6 0 5 0 a
56074a
App
als
cat
M at
e ri
io n
li
For shaft lock with
eccentric ring, go to:
5 6 0 7 0 a
Z
2,5
loss. Specially engineered for industries with corrosive wash down environments such as food and
beverage, pharmaceuticals and chemical processing. PN GOLD mounted ball bearings provide
outstanding performance in demanding corrosive environments.
COMPONENTS
82,5 Ta Material: 316 Passivated stainless steel U
Bearing Housing
B T
Bearing Insert Material: High phosphorus electroless nickelVcoated steel
Seal Material: High performance triple lip seal
Self Alignment: +/- 2°
Lock Type: Skwezloc concentric locking collar
Temperature: -29° to 104° C (-20° to 220° F)
Grease: Sealmaster GoldPlex-FG
End cap in stainless steel (bolts included) - must be ordered separately
SHAFT
T Ta U V Z B
Ø
30 39,6 1,6 45,3 46,5 29 108
40 44,4 1,6 53,2 54,4 32,3 111
11
82,5
Ø Ø Ø
B
82,5 Ta U
B T V
e Co
nanc nstr
ucti
Maint
on
ALL
56080a
App
als
cat
M at
e ri
io n
li
C Z
Ta U
L 16,5 V
T
Grub
B BA A B A screwsØ Ø Ø ØØ Ø
TECHNICAL INFORMATION
- Good resistance against many corrosive
chemicals such as water, oils, greases, petrol,
milk, wine, alcoholic beverages. TaTa Ta UU U
- Available in chrome steel and stainless
LL steel
L 16,5 16,5
16,5 VV V
bearings, (suitable for food, beverage and TT T
pharmaceutical industry).
- Housings also available as complete sealed units
for improved protection (wash down resistant STANDARD VERSION WASH DOWN RESISTANT VERSION
version).
BEARINGS BEARINGS CHROME STEEL
- Max. mis-alignment between shaft and housing: SEPARATE SEPARATE
CHROME CLOSED OPEN
2.5° STAINLESS STEEL
STEEL SAFETY SAFETY CLOSED CAP OPEN CAP
CAP CAP
SHAFT PART NO. PART NO.
A B C L T Ta U V Z ITEM DESCRIPTION ITEM DESCRIPTION
Ø
25 95,5 76,2 8,5 71 33 6 48 50 25 UCFG205-25M UCFG205-25M-SS 50009 50009APE UCFG205-25M-CEC UCFG205-25M-OEC
30 113 91 11 84,1 35,5 5,5 54 56 27 UCFG206-30M UCFG206-30M-SS 50027 50027APE UCFG206-30M-CEC UCFG206-30M-OEC
35 126,5 101,5 11 93,7 41,5 9,5 60 62 33 UCFG207-35M UCFG207-35M-SS 50010 50010APE UCFG207-35M-CEC UCFG207-35M-OEC
Z Z Z
Eccentric
ring
Ø Ø Ø Ø Ø Ø
COMPONENTS
Housing in reinforced polyamide. Seals in NBR Ta Ta Ta U U U
rubber. High precision self-aligning ball bearings in T T T V V V
chrome- or stainless steel, pre-lubricated. Grease
nipples and spacers from nickel plated brass.
Washers (where used) in AISI 304 (DIN 1.4301). STANDARD VERSION WASH DOWN RESISTANT VERSION
Safety cap in polypropylene.
(When fitted with a stainless steel bearing, the BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
grease nipple is in stainless steel). CHROME STEEL CLOSED OPEN
SAFETY SAFETY CLOSED CAP OPEN CAP
CAP CAP
SHAFT
A B C L T Ta U V Z ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
25 95,5 76,2 8,5 71 36,9 6 48 50 25 UCFG205-25ME 50009 50009APE UCFG205-25ME-CEC UCFG205-25ME-OEC
Revision 001
e Co
99 nanc nstr
e
35,5
ucti
Maint
on
ALL
56090a
App
als
cat
M at
e ri
io n
li
TECHNICAL INFORMATION
Ø with polished stainless steel cover.
Ø- Housing reinforced and protected
117
147
Grub
screws
Ø Ø
117
147
Ø Ø
117
147
55
Ta 55
Ta 66
11 16,5 66
11 T16,5
T
STANDARD VERSIONS WASH DOWN RESISTANT VERSION
35,535,5
Eccentric
ring
Ø Ø Ø Ø
COMPONENTS
Housing in reinforced polyamide. Cover Ta Ta 55 55
housing in stainless steel AISI 304-DIN 16,516,5 66 66
1.4301. Seals in NBR rubber. Self aligning T T
ball bearing in chrome or stainless steel,
STANDARD VERSIONS WASH DOWN RESISTANT VERSION
pre-lubricated. Nickel plated brass ball-
type grease nipple. Spacers from nickel BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
plated brass. Safety cap in polypropylene. CHROME STEEL CLOSED OPEN
CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
T Ta ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
30 48,7 13 CL206-30ME 50002 50002APE CL206-30ME-CEC CL206-30ME-OEC
Revision 001
ucti
Maint
on
TECHNICAL INFORMATION ALL
56100a
App
- Housing reinforced and protected with polished
als
cat
M at
e ri
io n
li
stainless steel cover.
82,5
Ø Ø no
111
35,5 35,5
Grub
screws
82,5
Ø Ø Ø Ø
111
11
11
82,5 82,5 Ta Ta 55 55
111 111 16,5 16,5 66 66
T T
STANDARD VERSION WASH DOWN RESISTANT VERSION
35,5
35,5
Eccentric
ring
Ø Ø Ø Ø
COMPONENTS
Housing in reinforced polyamide.
Cover housing in stainless steel
AISI 304-DIN 1.4301. Seals in NBR
rubber. Self aligning ball bearing Ta Ta 55 55
in chrome or stainless steel, 16,5
16,5 66 66
T T
pre-lubricated. Nickel plated brass
ball-type grease nipple. Spacers
from nickel plated brass. STANDARD VERSION WASH DOWN RESISTANT VERSION
Safety cap in polypropylene. BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
CLOSED OPEN
CHROME STEEL CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
T Ta ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
30 48,7 13 CS206-30ME 50002 50002APE CS206-30ME-CEC CS206-30ME-OEC
35 49,4 10,5 CSX207-35ME 50002 50002APE CSX207-35ME-CEC CSX207-35ME-OEC
Revision 001
e Co
nanc nstr
ucti
Maint
on
WEIGHT ALL
56110a
A A1 B C C1 D E E1 F
KG(IND.)
App
B
als
cat
M at
e ri
io n
li
91 103 127 33,3 16 67 11 17 31 0,33
FE 97 109 135 36,5 16 72,5 11 17 35 0,42
C1 111 129 156 42,9 21,5 87 13 22 41 0,55
D 117 135 164 47,6 21,5 95 13 22 45 Ø 0,78
C 129 147 179 49,2 21,5 100 13 22 48 0,97
C1
A Ta U
A1 T V
B VERSION WITH GRUB SCREWS
B B
F EF E
Grub
TECHNICAL INFORMATIONC1 C1 screws
- Good resistance against many corrosive. D D Ø Ø
Chemicals such as water, oils, greases, petrol,
milk, wine, alcoholic beverages. C C
- Available in chrome steel and stainless steel C1 C1
bearings, (suitable for food, beverage and A A Ta Ta U U
pharmaceutical industry). A1 A1 T T V V
- Housings also available as complete sealed B B
units for improved protection (wash down STANDARD VERSION WASH DOWN RESISTANT VERSION
resistant version).
BEARINGS BEARINGS CHROME STEEL
- Max. mis-alignment between shaft and housing: SEPARATE SEPARATE
2.5° CHROME CLOSED OPEN
STAINLESS STEEL SAFETY SAFETY CLOSED CAP OPEN CAP
STEEL
CAP CAP
SHAFT
A T Ta U V ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 91 36 11 50,5 52,5 UCP204-20M UCP204-20M-SS 50013 50013APE UCP204-20M-CEC UCP204-20M-OEC
25 97 39,5 12,5 55 57 UCP205-25M UCP205-25M-SS 50009 50009APE UCP205-25M-CEC UCP205-25M-OEC
30 111 46 16 65 67 UCP206-30M UCP206-30M-SS 50010 50010APE UCP206-30M-CEC UCP206-30M-OEC
35 117 49 17 67 69 UCP207-35M UCP207-35M-SS 50010 50010APE UCP207-35M-CEC UCP207-35M-OEC
40 129 45 11 63 65 UCP208-40M UCP208-40M-SS 50014 50014APE UCP208-40M-CEC UCP208-40M-OEC
BB
B
Eccentric
ring
COMPONENTS ØØ
Ø
Housing in reinforced polyamide. Seals in NBR
rubber. High precision self-aligning ball bearings
in chrome- or stainless steel, pre-lubricated.
TaTa
Ta UU
U
Grease nipples and spacers from nickel plated
TT T VV
V
brass. Washers (where used) in AISI 304 (DIN
1.4301). Safety cap in polypropylene.
(When fitted with a stainless steel bearing, the STANDARD VERSION WASH DOWN RESISTANT VERSION
grease nipple is in stainless steel). SEPARATE SEPARATE BEARINGS CHROME STEEL
BEARINGS
CLOSED OPEN
CHROME STEEL CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
A T Ta U V ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 91 41,9 11 50,5 52,5 UCP204-20ME 50013 50013APE UCP204-20ME-CEC UCP204-20ME-OEC
25 97 43,4 12,5 55 57 UCP205-25ME 50009 50009APE UCP205-25ME-CEC UCP205-25ME-OEC
30 111 51,7 16 65 67 UCP206-30ME 50010 50010APE UCP206-30ME-CEC UCP206-30ME-OEC
Revision 001
e Co
nanc nstr
ucti
Maint
on
ALL
56120a
App
WEIGHT
als
A B C D E F cat
M at
e ri
KG(IND.) io n
li
Z
50,8 70 33,3 65 M8 16 0,30
50,8 75 36,5 72 M10 16 0,37
76,2 98 42,9 85 M10 24 0,50
D Ø
C
F
E U VERSION WITH GRUB SCREWS
Ta
A V
H
B
T ZZ Z
Grub
TECHNICAL INFORMATION D D screws
D ØØ Ø
- Good resistance against many corrosive CC C
chemicals such as water, oils, Fgreases,
F F
petrol, milk, wine, alcoholic beverages.
- Available in chrome steel, and stainless E E E TaTa Ta UU U
steel bearings, (suitable for food, beverage A A A HH H VV V
and pharmaceutical industry). BB B
TT T
- Housings also available as complete sealed
units for improved protection (wash down STANDARD VERSION WASH DOWN RESISTANT VERSION
resistant version).
BEARINGS BEARINGS CHROME STEEL
- Max. mis-alignment between shaft and SEPARATE SEPARATE
housing: 2.5° CHROME CLOSED OPEN
STAINLESS STEEL SAFETY SAFETY CLOSED CAP OPEN CAP
STEEL
CAP CAP
SHAFT PART NO. PART NO.
A H T Ta U V Z ITEM DESCRIPTION ITEM DESCRIPTION
Ø
20 50,8 16 35,5 10,5 49 51 32 UCPA204-20M UCPA204-20M-SS 50008 50008APE UCPA204-20M-CEC UCPA204-20M-OEC
25 50,8 18 39 12 54 56 36 UCPA205-25M UCPA205-25M-SS 50007 50007APE UCPA205-25M-CEC UCPA205-25M-OEC
30 76,2 20 42 12 59 61 40 UCPA206-30M UCPA206-30M-SS 50003A 50003AAPE UCPA206-30M-CEC UCPA206-30M-OEC
Z Z Z
Eccentric
ring
Ø Ø Ø Ø Ø
Ø
COMPONENTS
Housing in reinforced polyamide. Seals in NBR
rubber. High precision self-aligning ball bearings in
Ta Ta U U U
Ta
chrome- or stainless steel, pre-lubricated. Grease
H H H V V V
nipples and spacers from nickel plated brass.
Washers (where used) in AISI 304 (DIN 1.4301). T T T
Safety cap in polypropylene. STANDARD VERSION WASH DOWN RESISTANT VERSION
(When fitted with a stainless steel bearing, the SEPARATE SEPARATE BEARINGS CHROME STEEL
BEARINGS
grease nipple is in stainless steel). CLOSED OPEN
CHROME STEEL CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
A H T Ta U V Z ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 50,8 16 41,4 10,5 49 51 32 UCPA204-20ME 50008 50008APE UCPA204-20ME-CEC UCPA204-20ME-OEC
Revision 001
e Co
nanc nstr
ucti
Maint
on
ALL
56130a
App
als
cat
M at
e ri
io n
li
T T T
16,5 16,5 16,5 Ta Ta Ta Ta T Ta
T Ta T
Ø Ø ØØ Ø Ø
75,5
75,5
75,5
Grub
10,5
36
10,5
10,5
36
36
screws
9 9 9
75 75 75 14 14
36 36
14
14 14
36 14 10 10 10 10 10 10 41,5 41,5 41,5
20 20 20 20 20 20 43,5 43,5 43,5
LEFT VERSION RIGHT VERSION
STANDARD VERSION
BEARINGS SEPARATE SEPARATE
CLOSED OPEN
CHROME STEEL STAINLESS STEEL
TECHNICAL INFORMATION SHAFT SAFETY CAP SAFETY CAP
T Ta PART NO. PART NO.
- Good resistance against many corrosive chemicals Ø ITEM DESCRIPTION
such as water, oils, greases, petrol, milk, wine, LEFT VERSION
alcoholic beverages.
- Available in chrome steel, and stainless steel 12 26,5 4,5 SQLL201-12M - 50012 50012APE
bearings, (suitable for food, beverage and 15 26,5 4,5 SQLL202-15M - 50012 50012APE
pharmaceutical industry). 16 26,5 4,5 SQLL203-16M - 50012 50012APE
- Housings also available as complete sealed units 17 26,5 4,5 SQLL203-17M - 50012 50012APE
for improved protection (wash down resistant 20 27 2 SQLL204-20M SQLL204-20M-SS 50012 50012APE
version).
RIGHT VERSION
- Max. mis-alignment between shaft and housing:
2.5° 12 26,5 4,5 SQLR201-12M - 50012 50012APE
15 26,5 4,5 SQLR202-15M - 50012 50012APE
16 26,5 4,5 SQLR203-16M - 50012 50012APE
17 26,5 4,5 SQLR203-17M - 50012 50012APE
20 27 2 SQLR204-20M SQLR204-20M-SS 50012 50012APE
16,516,5 Ta Ta T T Ta Ta T T
Eccentric
Ø Ø Ø Ø
3675,5
75,5
ring
10,5
10,5
36
9 9
75 75 14 1436 3614 14 10 10 10 10 41,541,5
20 20 20 20 43,543,5
STANDARD VERSION
COMPONENTS SEPARATE SEPARATE
Housing in reinforced polyamide. Seals in NBR BEARINGS CHROME STEEL CLOSED OPEN
rubber. High precision self-aligning ball bearings in SHAFT SAFETY CAP SAFETY CAP
chrome- or stainless steel, pre-lubricated. Grease T Ta ITEM DESCRIPTION PART NO. PART NO.
Ø
nipples and spacers from nickel plated brass. LEFT VERSION
Washers (where used) in AISI 304 (DIN 1.4301).
Safety cap in polypropylene. 20 27 2 SQLL204-20ME 50012 50012APE
Revision 001
ucti
Maint
on
ALL
56140a
WEIGHT
App
als
A B C F L Z cat
KG(IND.) M at
e ri
io n
li
Ø
46 41,3 125 28,6 69 27,5 0,43
Ø
52,4 47,6 140,5 31,7 84 29,5 0,52
C A
COMPONENTS
Housing in reinforced polyamide. Seals in NBR
rubber. High precision self-aligning ball bearings in Ø11
chrome- or stainless steel, pre-lubricated. Grease Ø11 12,5
nipples and spacers from nickel plated brass. 12,5
Washers (where used) in AISI 304 (DIN 1.4301).
Safety cap in polypropylene. STANDARD VERSION WASH DOWN RESISTANT VERSION
(When fitted with a stainless steel bearing, the SEPARATE SEPARATE BEARINGS CHROME STEEL
BEARINGS
grease nipple is in stainless steel). CLOSED OPEN
CHROME STEEL CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
A T Ta U V ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 40,9 10 49,5 51,5 UCFBZ204-20ME 50013 50013APE UCFBZ204-20ME-CEC UCFBZ204-20ME-OEC
46
25 39,4 8,5 52,5 54,5 UCFB205-25ME 50009 50009APE UCFB205-25ME-CEC UCFB205-25ME-OEC
Revision 001
5 6 1 5 0 a 0
S- 0,1
13,5 +0,1
-
HANGER BEARING UCHE
www.SystemPlastSmartGuide.com
e Co
F nanc nstr
ucti
Maint
on
ALL
56150a
4,5 F
App
B
als
B cat
M at
e ri
io n
li
WEIGHT
A B C F H J K L Z
KG(IND.)
62 65 50 25 97,5 45 M16 17 34 0,38
62 70 50 25 97,5 45 M20 17 34 0,38
C C 72 85 57 28 118 56 M24 18,5 Ø
37 0,5 Ø
H 72 90 57 28 118 H56 M24 18,5 37 0,5
0
S- 0,1 0
S- 0,1 +0,1
A 13,5 -
A 13,5 +0,1
-
4,54,5 F F
Eccentric ØØ ØØ
ring
COMPONENTS
Housing in reinforced polyamide. Seals in 28 28
NBR rubber. High precision self-aligning
ball bearings in chrome- or stainless steel, Ta Ta
K K L L
pre-lubricated. Grease nipples and spacers Z Z U U
T T V V
from nickel plated brass. Washers (where
used) in AISI 304 (DIN 1.4301). Safety cap in
polypropylene. STANDARD VERSION WASH DOWN RESISTANT VERSION
(When fitted with a stainless steel bearing, SEPARATE SEPARATE BEARINGS CHROME STEEL
BEARINGS CHROME
the grease nipple is in stainless steel). CLOSED OPEN
STEEL CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
A T Ta U V ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 62 40,9 10 44,5 54,5 UCHEZ204-20ME 50009 50009APE UCHEZ204-20ME-CEC UCHEZ204-20ME-OEC
25 62 40,4 9,5 44,5 54,5 UCHE205-25ME 50009 50009APE UCHE205-25ME-CEC UCHE205-25ME-OEC
Revision 001
ucti
Maint
on
ALL
56160a
App
als
cat
M at
e ri
io n
li
B F
4,5 WEIGHT
A B C F H J ØP R S Z
KG(IND.)
62 92 50 25 97,5 45 19 32 76 34 0,38
C 72
Ø 104 57 28 118 56 22Ø 37 89 37 0,5
0
H
0
S - 0,1 S - 0,1
13,5 +0,1
-
13,5 +0,1
-
A
16 F F VERSION WITH GRUB SCREWS
10
ØP B TB F F
U
R Z 4,5 4,5
V
J T
Grub
TECHNICAL INFORMATION screws Ø Ø
C C Ø Ø
- Good resistance against many corrosive
H H
chemicals such as water, oils, greases,
A A
petrol, milk, wine, alcoholic beverages.
- Available in chrome steel and stainless 16 16
steel (suitable for food, beverage and 10 10
pharmaceutical industry). ØP ØP T T U U
- Housings also available as complete R R Z Z V V
J J T T
sealed units for improved protection
(wash down resistant version).
- Max. misalignment between shaft and STANDARD VERSION WASH DOWN RESISTANT VERSION
housing: 2.5° BEARINGS BEARINGS CHROME STEEL
SEPARATE SEPARATE
CLOSED OPEN
CHROME STEEL STAINLESS STEEL SAFETY SAFETY CLOSED CAP OPEN CAP
CAP CAP
SHAFT PART NO. PART NO.
A T Ta U V ITEM DESCRIPTION ITEM DESCRIPTION
Ø
20 35 5,0 44,5 54,5 UCTZ204-20M UCTZ204-20M-SS UCTZ204-20M-CEC UCTZ204-20M-OEC
62 50009 50009APE
25 36,5 11,3 44,5 54,5 UCT205-25M UCT205-25M-SS UCT205-25M-CEC UCT205-25M-OEC
30 40,5 6,5 51,5 61,5 UCT206-30M UCT206-30M-SS UCT206-30M-CEC UCT206-30M-OEC
72 50010 50010APE
35 42 13,7 51,5 61,5 UCTX207-35M UCTX207-35M-SS UCTX207-35M-CEC UCTX207-35M-OEC
F F
4,5 4,5
Eccentric
ring
Ø Ø Ø Ø
COMPONENTS
Housing in reinforced polyamide. Seals in
NBR rubber. High precision self-aligning
ball bearings in chrome- or stainless steel,
pre-lubricated. Grease nipples and spacers
Ta Ta U U
from nickel plated brass. Washers (where Z Z V V
used) in AISI 304 (DIN 1.4301). Safety cap T T
in polypropylene.
(When fitted with a stainless steel STANDARD VERSION WASH DOWN RESISTANT VERSION
bearing, the grease nipple is in stainless
steel). BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
CLOSED OPEN
CHROME STEEL
SAFETY SAFETY CLOSED CAP OPEN CAP
CAP CAP
SHAFT
A T Ta U V ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 40,9 10 44,5 54,5 UCTZ204-20ME UCTZ204-20ME-CEC UCTZ204-20ME-OEC
62 50009 50009APE
25 40,4 9,5 44,5 54,5 UCT205-25ME UCT205-25ME-CEC UCT205-25ME-OEC
Revision 001
5 6 1 7 0 a 0
HANGER BEARING UCTT
S- 0,1
www.SystemPlastSmartGuide.com
13,5 +0,1
-
e Co
nanc nstr
e
F
ucti
Maint
on
ALL
56170a
App
S- 0,1
als
4,5 F 13,5 +0,1
-
cat
M at
e ri
io n
li
B
F
4,5 F
B B
WEIGHT
C A BØ C F H J K L ØS Z
KG(IND.)
H H 62 92 50 25 97,5 45 M20 17 76 34 0,38
A C 72 104 570 28 118 56 M24 18,5 89 Ø
37 0,5 Ø
A C
0
S- 0,1 S13,5 +0,1
- 0,1 - +0,1
13,5 -
H H
A
28 VERSION WITH GRUB SCREWS
F F A
J Ta K 4,5 F
L 28
B B B B Z
4,5 F U
J J TaVK L
T Z U
TECHNICAL INFORMATION T V
- Good resistance against many
C Ø Ø Ø Ø
corrosive chemicals Csuch as water,Coils, C
H H HGrub H
greases, petrol, milk, wine, alcoholic screws
beverages. A A A A
- Available in chrome steel and stainless 28 28
steel (suitable for food, beverage and
J
pharmaceutical industry). J J J Ta K Ta K L L
Z U U
- Housings also available as complete Z V
T T V
sealed units for improved protection
(wash down resistant version). STANDARD VERSION WASH DOWN RESISTANT VERSION
- Max. mis-alignment between shaft and
BEARINGS BEARINGS CHROME STEEL
housing: 2.5° SEPARATE SEPARATE
CLOSED OPEN
CHROME STEEL STAINLESS STEEL SAFETY SAFETY CLOSED CAP OPEN CAP
CAP CAP
SHAFT PART NO. PART NO.
A T Ta K U V ITEM DESCRIPTION ITEM DESCRIPTION
Ø
20 35 10,0 M16 44,5 54,5 UCTTZ204-20M UCTTZ204-20M-SS UCTTZ204-20M-CEC UCTTZ204-20M-OEC
62 50009 50009APE
25 36,5 9,5 M20 44,5 54,5 UCTT205-25M UCTT205-25M-SS UCTT205-25M-CEC UCTT205-25M-OEC
30 40,5 10,5 M24 51,5 61,5 UCTT206-30M UCTT206-30M-SS UCTT206-30M-CEC UCTT206-30M-OEC
72 50010 50010APE
35 42 10,0 M24 51,5 61,5 UCTTX207-35M UCTTX207-35M-SS UCTTX207-35M-CEC UCTTX207-35M-OEC
4,5 F
Eccentric Ø Ø
ring
COMPONENTS
Housing in reinforced polyamide. Seals in NBR
28
rubber. High precision self-aligning ball bearings
in chrome- or stainless steel, pre-lubricated. Ta K L
Grease nipples and spacers from nickel plated Z U
brass. Washers (where used) in AISI 304 (DIN T V
1.4301). Safety cap in polypropylene.
(When fitted with a stainless steel bearing, the STANDARD VERSION WASH DOWN RESISTANT VERSION
grease nipple is in stainless steel). BEARINGS SEPARATE SEPARATE BEARINGS CHROME STEEL
CLOSED OPEN
CHROME STEEL CLOSED CAP OPEN CAP
SAFETY SAFETY
SHAFT CAP CAP
A T Ta K U V ITEM DESCRIPTION PART NO. PART NO. ITEM DESCRIPTION
Ø
20 40,9 10 M16 44,5 54,5 UCTTZ204-20ME UCTTZ204-20ME-CEC UCTTZ204-20ME-OEC
62 50009 50009APE
25 40,4 9,5 M20 44,5 54,5 UCTT205-25ME UCTT205-25ME-CEC UCTT205-25ME-OEC
Revision 001
5 6 3 0 0 a BALL BEARINGS
www.SystemPlastSmartGuide.com
e Co
nanc nstr
ucti
Maint
on
ALL
56300a
App
als
K E K E cat
M at
e ri
io n
li
STANDARD VERSION WITH GRUB SCREWS
A SPHERE
BEARING LOAD
G Ø G DIMENSION (mm)
RATINGS
PART WEIGHT
ØD D ØD
n m NUMBER DYNAMIC STATIC (KG)
mm n mA B K D E G M N
C (N) CO (N)
12 UC201 40 22 12 24,6 4 M5 16 6 7300 4760 0,15
15 UC202 40 22 12 24,6 4 M5 16 6 7300 4760 0,15
B 16 UC203-16MMB 40 22 12 24,6 4 M5 16 6 7300 4760 0,15
MATERIAL
• Rings and balls in chrome steel. 17 UC203 40 22 12 24,6 4 M5 16 6 7300 4760 0,15
• Grub screws and protection rings are in steel. 20 UC204 47 25 14 29 5 M6 18 7 9850 6580 0,18
• Seals in metal with vulcanised NBR rubber. 25 UC205 52 27 15 34 5,5 M6 19,5 7,5 10800 7800 0,22
30 UC206 62 30 16 40,3 6 M6 22 8 15000 11300 0,40
35 UC207 72 32 17 48 6,5 M8 23,5 8,5 19700 15300 0,45
40 UC208 80 34 18 53 7 M8 25 9 22400 17900 0,62
K E
G BEARING LOAD
Ø DIMENSION (mm)
ØD PART RATINGS WEIGHT
n m D
NUMBER DYNAMIC STATIC (KG)
mm A B K D E G M N
C (N) CO (N)
20 UEC204 47 31 14 33,3 5 M6 23,5 7,5 9850 6580 0,25
MATERIAL B 25 UEC205 52 31 15 38,1 5 M6 23,5 7,5 10800 7800 0,30
• Rings and balls in chrome steel. 30 UEC206 62 35,7 16 44,5 6 M6 26,7 9 15000 11300 0,48
• Grub screws and protection rings are in steel. 35 UEC207 72 38,9 17 55,6 6,5 M8 29,4 9,5 19700 15300 0,53
• Seals in metal with vulcanised NBR rubber. 40 UEC208 80 43,7 18 60,3 6,5 M8 32,7 11 22400 17900 0,70
K E K E
G G
BEARING LOAD
ØD Ø ØD DIMENSION (mm)
n m PART
n RATINGS WEIGHT
D m
NUMBER DYNAMIC STATIC (KG)
mm A B K D E G M N
C (N) CO (N)
20 UCSS204 47 25,7 14 29 5 M6 18,7 7 7300 4900 0,18
B 25 B
UCSS205 52 27 15 34 5,5 M6 19,5 7,5 8100 5800 0,22
MATERIAL
• Rings and balls in stainless steel with 30 UCSS206 62 30 16 40,3 6 M6 22 8 11250 8400 0,40
Cr+Mo to increase corrosion resistance. 35 UCSS207 72 32 17 48 6,5 M8 23,5 8,5 14700 11400 0,45
• Grub screws and protection rings are in stainless steel. 40 UCSS208 80 34 18 53 7 M8 25 9 16800 13400 0,62
• Seals in stainless steel with vulcanized silicon rubber. USE: Where a high resistance to corrosion is required.
GREASE NIPPLES
D
D
C
A A
e Co
nanc nstr
Clip-on safety cap
ucti
Maint
on
ALL
56300b
COLOUR
App
als
cat
M at
e ri
io n
li
- Safety cap in yellow polypropylene.
- For sufficient quantities parts can be produced in different colors or in transparent.
H H
COLOUR
- Safety cap in polypropylene (transparent-yellow).
TYPE B
D
OPEN VERSION CLOSED VERSION
TYPE D H
ITEM DESCRIPTION
CAP7023-B30M-P-YT-SE CAP-C7023-IF-YT-SE B 70 23
CAP8437-B40M-P-YT-SE CAP-C8437-IF-YT-SE B 84 37
H
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
5 7 0 1 0 a INDEX EQUIPMENT
www.SystemPlastSmartGuide.com
DUAL DIVERT VERSION DUAL DIVERT - HEAVY DUTY VERSION FEATURES FOR VERSIONS:
Standard, Heavy Duty, Dual Divert
and Dual Divert-Heavy Duty
Can be used as Infeed
Max. Max.
Passes product straight through
25 Kg 22,7 Kg
Maintain properly product gapping
Max. Max. Max. Stop and divert full 90 degrees
25 Kg 22,7 Kg 5 7 0 2 0 a 50 Kg 5 7 0 2 0 a
Divert on the fly (blended vector angle)
Max. MODTURN VERSION Modturn
50 Kg
Can be used as Infeed
Passes product straight through
Combined action of both PVC
Turning Belts rotate products
90 degrees turn
Max. Max. 180 degrees turn
5 7 0 2 0 a
25 Kg 22,7 Kg Intermediate (Single or Double)
Max. INTERMEDIATE SINGLE VERSION INTERMEDIATE DOUBLE VERSION Can be used as Infeed
50 Kg Passes product straight through
Maintain properly product gapping
Can be used as Gapper / Singulator
5 7 0 2 5 a
SUPPORT LEG KIT - POWER SUPPLY KIT - STAND ALONE KIT - CONTROL CARD, ETC.
5 7 0 8 0 a 5 7 0 3 0 a
Revision 001
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
STANDARD VERSION
A The Modsort® standard module is an all 24-Volt motorized driven roller (MDR) based right angle transfer
and/or diverter station. It integrates easily with other MDR-based conveyors and can also be used to inte-
grate to more traditional conveyor types, providing all interlocks and controls links are properly established.
The Modsort standard module is designed to handle any kind of package, from small packages like polybags
to medium sizes traditional packages. The Modsort standard module can be installed as a true right-angle
B C transfer or can be utilized as an on-the-fly diverter station.
D
Max. Max.
30 Kg 22,7 Kg
INTERNAL EXTERNAL
Max. TURNING LENGTH ZONE HEIGHT UNIT
LENGTH WIDTH WIDTH
50 Kg ITEM DESCRIPTION - COMPLETE UNIT SIZE "E" FRAME WEIGHT
"A" "B"
mm (inch) kg (lbs.)
MS-TRN-AI2-L36W32-28 5 914 (36) 711 (28) 805 (32) 338 x 650 (13.3 x 25.6) 202 (8) 113 (249)
MS-TRN-AI2-L42W32-28 7 1066 (42) 711 (28) 805 (32) 338 x 760 (13.3 x 29.9) 202 (8) 126 (277)
MS-TRN-AI2-L42W38-34 8 1066 (42) 864 (34) 958 (38) 425 x 760 (16.6 x 29.9) 202 (8) 139 (306)
Networked Control Card Ai2
MS-INT-1ZB-L28W38-34 MS-INT-2ZB-L56W38-34 8 711 (28) 1422 (56) 864 (34) 958 (37.7) 202 (8) 115 (253.53) 230 (507.06)
MS-INT-1ZB-L28W40-37 MS-INT-2ZB-L56W40-37 9 711 (28) 1422 (56) 922 (36) 1029 (40.5) 202 (8) 124 (273.37) 240 (529.11)
Networked Control Card Ai2
* The following are believed to be the trademarks and/or trade names of their respective owners and are not owned or controlled
by Regal Beloit Corpotation. PulseRoller, Senergy: Insight Automation, Inc.
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
back
57020a
TAKE-AWAY TRANSFER
MODSORT WIDTH LENGTH
ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION
SIZE
mm (inch)
MODSORT-MSGK-30-16TAW-S MODSORT-MSGK-30-16TAW-D MODSORT-MPES-30-16TAW-S MODSORT-MPES-30-16TAW-D 1, 2 406 (16) 762 (30)
MODSORT-MSGK-30-22TAW-S MODSORT-MSGK-30-22TAW-D MODSORT-MPES-30-22TAW-S MODSORT-MPES-30-22TAW-D 1, 2 559 (22) 762 (30)
MODSORT-MSGK-36-16TAW-S MODSORT-MSGK-36-16TAW-D MODSORT-MPES-36-16TAW-S MODSORT-MPES-36-16TAW-D 3, 4, 5 406 (16) 914 (36)
MODSORT-MSGK-36-22TAW-S MODSORT-MSGK-36-22TAW-D MODSORT-MPES-36-22TAW-S MODSORT-MPES-36-22TAW-D 3, 4, 5 559 (22) 914 (36)
MODSORT-MSGK-36-28TAW-S MODSORT-MSGK-36-28TAW-D MODSORT-MPES-36-28TAW-S MODSORT-MPES-36-28TAW-D 3, 4, 5 711 (28) 914 (36)
MODSORT-MSGK-42-22TAW-S MODSORT-MSGK-42-22TAW-D MODSORT-MPES-42-22TAW-S MODSORT-MPES-42-22TAW-D 6, 7, 8 559 (22) 1066 (42)
MODSORT-MSGK-42-28TAW-S MODSORT-MSGK-42-28TAW-D MODSORT-MPES-42-28TAW-S MODSORT-MPES-42-28TAW-D 6, 7, 8 711 (28) 1066 (42)
MODSORT-MSGK-42-34TAW-S MODSORT-MSGK-42-34TAW-D MODSORT-MPES-42-34TAW-S MODSORT-MPES-42-34TAW-D 6, 7, 8 864(34) 1066 (42)
MODSORT-MSGK-56-36TAW-S MODSORT-MSGK-56-36TAW-D MODSORT-MPES-56-36TAW-S MODSORT-MPES-56-36TAW-D 9 1422 (56) 914 (36)
MODSORT-MSGK-56-42TAW-S MODSORT-MSGK-56-42TAW-D MODSORT-MPES-56-42TAW-S MODSORT-MPES-56-42TAW-D 9 1422 (56) 1067 (42)
MODSORT-MSGK-56-48TAW-S MODSORT-MSGK-56-48TAW-D MODSORT-MPES-56-48TAW-S MODSORT-MPES-56-48TAW-D 9 1422 (56) 1219 (48)
Check also our Low friction bead guides that are including light and heavy duty options.
Go to page: 5 1 5 2 0 a
e Co
nanc nstr
MODFLEX - R800 L1400 A90 R - TM Contact us
ucti
Maint
on
for moreALL
information
or technical support
App
als
cat
M at
e ri
io n
li
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
500 to 2000 mm
A = Angle standard
90° or 180°
PRODUCT
TYPICALLY
L = Width from CONVEYED
200 to 1700 mm
Features:
• Suitable for conveying large and heavy products.
General information: • Safe design (completely closed structure).
• Compact design in relation to the width of the belt (small • High wear resistance.
radius in combination with wide curve possible). • High chemical resistance. Wood panels
• Position and orientation of conveyed products perfectly • Low noise.
controlled and not altered during operation. • Dry run solution.
• Relatively small in-feed and out-feed rolling diameters to
grant a good product transfer. Application:
• High strength and resistance to heavy loads. • Logistics industry and distribution centers.
• High linear speed. • Food and beverage.
• Easy maintenance requirements. • Tiles, bricks and cement production.
H
°
90
90
Ri W 25
Containers
5 7 0 3 5 a 5 7 0 4 0 a 5 7 0 4 5 a 5 7 0 5 0 a
90° Right 90° Left 90° Right with 90° Left with
transfer transfer Cardboard boxes
5 7 0 5 5 a 5 7 0 6 0 a 5 7 0 6 5 a 5 7 0 7 0 a
Revision 001
180° Right 180° Left 180° Right with 180° Left with Plastic cases
transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
RIGHT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60 500 to 2000 mm
A = Angle standard
90° or 180°
°
90
L = Width from
25 W Ri 200 to 1700 mm
5 7 0 4 0 a 5 7 0 4 5 a 5 7 0 5 0 a 5 7 0 5 5 a 5 7 0 6 0 a 5 7 0 6 5 a 5 7 0 7 0 a
Revision 001
90° Left 90° Right with 90° Left with 180° Right 180° Left 180° Right with 180° Left with
transfer transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
LEFT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60
500 to 2000 mm
A = Angle standard
90° or 180°
90
°
L = Width from
Ri W 25 200 to 1700 mm
5 7 0 3 5 a 5 7 0 4 5 a 5 7 0 5 0 a 5 7 0 5 5 a 5 7 0 6 0 a 5 7 0 6 5 a 5 7 0 7 0 a
Revision 001
90° Right 90° Right with 90° Left with 180° Right 180° Left 180° Right with 180° Left with
transfer transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
RIGHT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60 500 to 2000 mm
A = Angle standard
90° or 180°
°
90
L = Width from
25 W Ri 200 to 1700 mm
5 7 0 3 5 a 5 7 0 4 0 a 5 7 0 5 0 a 5 7 0 5 5 a 5 7 0 6 0 a 5 7 0 6 5 a 5 7 0 7 0 a
Revision 001
90° Right 90° Left 90° Left with 180° Right 180° Left 180° Right with 180° Left with
transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
LEFT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60 500 to 2000 mm
A = Angle standard
90° or 180°
90
°
L = Width from
Ri W 25 200 to 1700 mm
5 7 0 3 5 a 5 7 0 4 0 a 5 7 0 4 5 a 5 7 0 5 5 a 5 7 0 6 0 a 5 7 0 6 5 a 5 7 0 7 0 a
Revision 001
90° Right 90° Left 90° Right with 180° Right 180° Left 180° Right with 180° Left with
transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
RIGHT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60 500 to 2000 mm
A = Angle standard
180° 90° or 180°
L = Width from
25 W Ri W 25 200 to 1700 mm
5 7 0 3 5 a 5 7 0 4 0 a 5 7 0 4 5 a 5 7 0 5 0 a 5 7 0 6 0 a 5 7 0 6 5 a 5 7 0 7 0 a
Revision 001
90° Right 90° Left 90° Right with 90° Left with 180° Left 180° Right with 180° Left with
transfer transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
LEFT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60 500 to 2000 mm
A = Angle standard
180° 90° or 180°
L = Width from
25 W Ri W 25 200 to 1700 mm
5 7 0 3 5 a 5 7 0 4 0 a 5 7 0 4 5 a 5 7 0 5 0 a 5 7 0 5 5 a 5 7 0 6 5 a 5 7 0 7 0 a
Revision 001
90° Right 90° Left 90° Right with 90° Left with 180° Right 180° Right with 180° Left with
transfer transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
RIGHT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60 500 to 2000 mm
A = Angle standard
180° 90° or 180°
L = Width from
25 W Ri W 25 200 to 1700 mm
5 7 0 3 5 a 5 7 0 4 0 a 5 7 0 4 5 a 5 7 0 5 0 a 5 7 0 5 5 a 5 7 0 6 0 a 5 7 0 7 0 a
Revision 001
90° Right 90° Left 90° Right with 90° Left with 180° Right 180° Left 180° Left with
transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
ucti
Maint
on
for moreALL
information
LEFT or technical support
App
als
cat
M at
e ri
io n
li
MODFLEX - R800 L1400 A90 R - TM
TM = with transfer
roller modules
(both sides)
R = Right
R = Radius from L = Left
60 500 to 2000 mm
A = Angle standard
180° 90° or 180°
L = Width from
25 W Ri W 25 200 to 1700 mm
5 7 0 3 5 a 5 7 0 4 0 a 5 7 0 4 5 a 5 7 0 5 0 a 5 7 0 5 5 a 5 7 0 6 0 a 5 7 0 6 5 a
Revision 001
90° Right 90° Left 90° Right with 90° Left with 180° Right 180° Left 180° Right with
transfer transfer transfer
1 1 0 1 0 a
Chains & sprockets 5 Wear
0 5 strips
1 0 a Side guide brackets &
5 3 5 1 0 a
accessories 5 5Levelers
5 1 0 a 7Engineering
2 0 1 manual
0 a
3 Modular
0 belts
&0sprockets
1 0 a Chain & belt
5return
1 0systems
1 0 a 5Frame & structure
4supports
0 1 0 a 5Bearing
6 0supports
1 0 a
5Curves
0 0& tracks
0 5 a 5 1guide
Side 5 solutions
1 0 a Miscellaneous
5 4products
5 1 0 a 5 Equipment
7 0 1 0 a
e Co
nanc nstr
Contact us
ucti
Maint
Features for iCOF device:
PATENT PROTECTED
on
for moreALL
information
• Real time monitoring of the line condition. or technical support
App
als
• Addressing all container type (PET, glass and cans). cat
M at
e ri
io n
li
• Continuously measures the coefficient of friction.
• Calculates average value and a trend.
• Triggers an alarm if pre-set limits are reached.
• Can be portable or integrated in line control system.
Benefits:
• No operator intervention required for measuring.
• Easy to define optimum cleaning regime: “Smart Cleaning”.
• Corrective action can be scheduled before efficiency is affected.
• Long term line condition can be analyzed using data from the iCOF device.
Obtained data is used to calculate the average value as well as the trend. The values
7.05 in
can trigger a signal once a pre-set limit is passed. Based on this signal, the user
can check the situation and decide about the required corrective action. The system
can work with Ehernet or Profinet protocol. Output is done through RJ45 connector.
PUCK Obviously for integration in the line control system, a close cooperation with the
OEM is required. The iCOF device can also be used as a stand-alone or portable
device for spot measurements.
SLIDER
1.7 in
3.3 in
0.7 in
168 mm
6.6 in
CAN
ICOF-CAN ICOF-SLIDER-CAN
GLASS
ICOF-GLASS ICOF-SLIDER-GLASS
Revision 001
ucti
Maint
on
for moreALL
information
24V plug or technical support
App
als
Single pin cat
ITEM DESCRIPTION
M at
e ri
24V plug for line io n
li
to power supply
current to iCOF®
ICOF-CONTROLLER MODULE condition monitoring
device
STAND ALONE: Secondary mode, for portable use and quick installation Data line
RJ45 type
(Ethernet)
a) CONTROLLER MODE
7 Inches touch screen, 24V industrial tablet, waterproof
Software and GUI embedded into the controller
Easy and quick connection to the iCOF device
(pre set plugs and cables)
Plug and play
Easy fixing to the conveyor frame
ITEM DESCRIPTION
STAND ALONE: Secondary mode, for portable use and quick installation
b) PC MODE
lternative mode (not recommended - PC often not allowed in line)
A
It requires software for data aquisition (available)
It requires PLC emulator (hardware key supplied apart)
24V adaptor to line current for iCOF condition monitoring
device supplied as optional on request.
IMPORTANT NOTE
This mode of use implies PC rigths at Admin level.Being the architecture of the software is based on the PLC architecture, it may become
necessary to bypass the firewall by opening some backdoors.This often is a not acceptable condition for a PC security.
POWER SUPPLY
ITEM DESCRIPTION
ITEM DESCRIPTION
Easy assembly
B - MASS CONVEYOR 7 2 0 1 2 a
A - PRESSURELESS COMBINER/
DECOMBINER, HIGH SPEED 7 2 0 1 5 a
B - MASS CONVEYOR 7 2 0 1 5 a
A - PRESSURELESS COMBINER/
DECOMBINER, HIGH SPEED 7 2 0 1 9 a
B - MASS CONVEYOR 7 2 0 2 0 a
7 2 0 3 0 a
Revision 001
72010a
back 72013a
continue
A - PRESSURELESS COMBINER/DECOMBINER, HIGH SPEED
B - MASS CONVEYOR
1
1 0 3 0 a Straight • SSL815/SSEL815/SSE815/SS812 with HB pin version
RECOMMENDED CHAIN SERIES
1
1 0 6 0 a Sideflexing • SS/SSL/SSE 881 series with HB pin version
OPTIONAL CHAIN SERIES 1
1 0 3 0 b Straight • S815 series
• Lubrication is recommended for all sections with SS chains. No lube with S815 series.
GENERAL RECOMMENDATIONS • K330 width offers reduced gap between adjacent chains and improve product
handling.
Regardless the conveyor type, its working condition has an impact on the chain’s service life.
Please follow the below recommendation for these particular working condition.
1. Abrasive working conditions: use chain series with HB pin version and keep the conveyor as clean as possible (frequent
cleaning regime);
2. Corrosive working conditions: use chain made of Austenitic Stainless Steel (SSA material);
In case you need support for such application please contact our technical support team at
technicalsupport@systemplast.com
7 2 0 1 0 a 7 2 0 1 3 a
Revision 001
72012a
back 72015a
continue
1
1 1 2 0 a Straight • 802 and 805 series (very high strength)
RECOMMENDED CHAIN SERIES 1 1 1 0 0 a Straight • 8157 series (high strength)
1
1 1 1 0 a Sideflexing • 8857 series
1 1 1 5 0 a Straight • 815 VG
1 1 1 6 0 a Straight • 881 VG
RECOMMENDED CHAIN SERIES 1 1 1 8 0 a Straight • 805 VG
1
1 1 6 0 a 1 1 1 8 0 a Straight • 8857 VG and 8157 VG
1 1 1 5 0 a Straight • 814 VG
GENERAL RECOMMENDATIONS • Lube only on the bottom side for all VG SS chains.
Regardless the conveyor type, its working condition has an impact on the chain’s service life.
Please follow the below recommendation for these particular working condition.
1. Abrasive working conditions: use chain series with HB pin version and keep the conveyor as clean as possible (frequent
cleaning regime);
2. Corrosive working conditions: use chain made of Austenitic Stainless Steel (SSA material);
In case you need support for such application please contact our technical support team at
technicalsupport@systemplast.com
7 2 0 1 0 a 7 2 0 1 2 a
Revision 001
72013a
back 72016a
continue
A - PRESSURELESS COMBINER/DECOMBINER, HIGH SPEED
• K330 width offers reduced gap between adjacent chains and improved product
stability, particularly in side-transferring sections.
GENERAL RECOMMENDATIONS
• NG®evo conveyor components made from engineered plastic resin is
recommended for abrasive conditions as well as for high speed.
B - MASS CONVEYOR
• K330 width offers reduced gap between adjacent chains and improved product
stability, particularly in side-transferring sections.
GENERAL RECOMMENDATIONS •NG®evo conveyor components made from engineered plastic resin is
recommended for abrasive conditions.
• LF material for standard conditions.
1 1 3 1 0 a Straight • 8257
1 1 4 6 0 a Straight • Plate top chain 843-845; 863; 1843; 1873; 1863
RECOMMENDED CHAIN SERIES
1 1 2 8 0 a Sideflexing • 882
7 2 0 1 0 a 7 2 0 1 6 a
Revision 001
72015a
back 72019a
continue
D - INCLINED/DECLINED CONVEYOR
1 1 3 8 0 a Straight • 831 VG
1 1 4 1 0 a Straight • 821 VG and 8257 VG
1 1 4 0 0 a Sideflexing • 882 VG
1 1 4 2 0 a Sideflexing • Plate top chain 1873 VG
• Plate top chains are good choice for application with high start-up frequency.
GENERAL RECOMMENDATIONS
• Lubrication is recommended for ANSI roller chain.
1 1 4 3 0 a • 878 GS
RECOMMENDED CHAIN SERIES
1 1 4 4 0 a • Plate top chain 1873 GS
7 2 0 1 0 a 7 2 0 1 5 a
Revision 001
72016a
back 72020a
continue
Straight
3 0 0 6 0 b
• Series 2120 (width 85mm): 0.5’’ pitch, thickness 8.5 mm;
mostly with positioners
3 0 0 3 0 b
• Series 2121 (single track): 0.5’’ pitch, thickness 8.5 mm; mostly
with positioners
3 0 2 0 0 a
• Series 2190 (single track): 0.75’’ pitch, thickness 8.5 mm; mostly
with positioners
3 0 3 1 0 a
• Series 2250 (single track): 1’’ pitch, thickness 8.5 mm; mostly
with positioners
RECOMMENDED CHAIN SERIES:
Best choice for high demanding
3 0 4 5 0 b
• Series 2251 (width 85mm): 1’’ pitch, thickness 12.7 mm; mostly
with positioners
application: high speed, high
load. 3 0 4 2 0 a
• Series 2252 (single track): 1’’ pitch, thickness 12.7 mm; mostly
Suitable belt series to be with positioners
selected according to the type of
Sideflexing
product.
3 0 7 2 0 a
• Series 2120M-K330 (width 83.8 mm): 0.5’’ pitch,
thickness 8.5 mm;
3 0 7 1 0 a
• Series 2250 TAB-K330/K450 (width 83.8 and 114.3 mm):
1’’ pitch, thickness 8.5 mm;
3 0 7 0 0 a • Series 2260M-K330 (width 83.8): 1’’ pitch, thickness 8.5 mm;
3 0 7 0 0 a
• Series 2251M-K330/K450 (width 83.8 and 114.3 mm):
1’’ pitch, thickness 12.7 mm;
3 0 7 1 0 a
• Series 2251 TAB-K330/K450 (width 83.8 and 114.3 mm):
1’’ pitch, thickness 12.7 mm;
• K330 width offers reduced gap between adjacent chains and improve product
stability, particularly in side-transferring sections.
GENERAL RECOMMENDATIONS • NG®evo conveyor components made from engineered plastic resin is
recommended for abrasive conditions as well as for high speed and/or high
load.
7 2 0 1 0 a 7 2 0 2 0 a
Revision 001
7 2 0 2 1 a D - Inclined/declined conveyor
72019a
back 72021a
continue
B - MASS CONVEYOR
Straight
3
0 0 5 0 a • Series 2120: 0.5’’ pitch, thickness 8.5 mm;
RECOMMENDED CHAIN SERIES 3 0 4 4 0 a • Series 2251: 1’’ pitch, thickness 12.7 mm;
Suitable belt series to be
selected according to the kind of
3 0 4 4 5 a • Series 2252: 1’’ pitch, thickness 12.7 mm;
product. Sideflexing
3 0 7 2 0 a • Series 2120M: 0.5’’ pitch, thickness 8.5 mm;
• K330 width offers reduced gap between adjacent chains and improve product
stability, particularly in side-transferring sections. Ensure the pitch between lanes will
allow for the wider modules
GENERAL RECOMMENDATIONS
• NG®evo conveyor components made from engineered plastic resin is
recommended for abrasive conditions.
• LF material for standard conditions.
7 2 0 1 0 a 7 2 0 1 9 a
Revision 001
7 2 0 2 1 a D - Inclined/declined conveyor
back
72020a
Straight
3 0 4 4 0 a • Series 2251: 1’’ pitch, thickness 12.7 mm;
• K330 width offers reduced gap between adjacent chains and improve product
stability, particularly in side-transferring sections. Ensure the pitch between lanes will
allow for the wider modules
• NG®evo conveyor components made from engineered plastic resin is
GENERAL RECOMMENDATIONS recommended for abrasive conditions. It also has a reduced Coefficient of
Friction
• LF material for standard conditions.
• (1): mostly used in pasteurizer machine;
• (2): mostly used for automotive applications
Straight
3
0 1 0 0 a • Series 2120 VG
RECOMMENDED CHAIN SERIES:
Best choice for high demanding
3 0 3 7 0 a • Series 2250 VG
7 2 0 1 0 a 7 2 0 1 9 a
Revision 001
• Conveyor length and speed......................................... 72115a • Parameters affecting service life................................... 73015a
• Sprocket position for belt............................................. 72120a • Cleaning and maintenance............................................ 73017a
• Matching sprocket sizes chainsbelts running • 2500RR cleaning instructions....................................... 73021a
72130a
sideside........................................................................ • Inspection procedure and replacement criteria............ 73023a
• Sprocket keyway dimensions ...................................... 72132a • Mounting and removal of belt....................................... 73030a
• Curve systems............................................................. 72134a • Powerflex™ belt assembly instructions........................ 73041a
• Construction recommendations 72140a • 2253RT assembly instructions...................................... 73043a
• Transfers...................................................................... 72162a • Installation procedure................................................... 73045a
• Wearstrips ................................................................... 72195a • Installation of curves..................................................... 73047a
• Powerflex™ belt........................................................... 72220a • Bearing mounting instructions...................................... 73052a
• 2256 Sideflexing belts.................................................. 72260a • How to identify a curve................................................. 73058a
• 2253RTC Roller Top belt............................................... 72290a • Troubleshooting............................................................. 73062a
• 2500RR raised rib belt................................................. 72310a
• 2508-2630 heavy duty belts......................................... 72330a
CALCULATIONS AND MATERIALS
• 2080FT micropitch belt................................................ 72350a
Chapters and subchapters complete section index.... 73510a
• 2502DT draining top belt.............................................. 72356a
• Conveyor components - Speedset™ brackets............. 72360a • Product handling........................................................... 73515a
• Pressure of accumulation products.............................. 73522a
Chapters and subchapters complete section index.... 72510a • Thermal expansion........................................................ 73526a
• Raised rib belt 2500...................................................... 73528a
• Extra curves.................................................................. 72515a • 2253RTC Calculations................................................... 73533a
• Self cleaning curves...................................................... 72515b • Bearing.......................................................................... 73542a
• Crate conveying............................................................ 72520a • Materials....................................................................... 73560a
• Gripper chains & selection of gripper version............... 72532a • Storage of plastic chains and belts and RoHs............... 73576a
• Noise reduction............................................................. 72536a • Disposal of products..................................................... 73577a
• Inclined and declined conveyors................................... 72540a • Coefficients of friction of standard materials................ 73578a
• LBP Accumulation........................................................ 72546a • Coefficient of friction - Measurement procedure.......... 73580a
• Roller side guides......................................................... 72552a • Coefficient of friction - Good measurement practice.... 73581a
• Pressureless combiners............................................... 72558a • Chemical resistance of standard materials................... 73586a
• Dry lubrication............................................................... 72564a • Application temperatures.............................................. 73588a
• Dry run considerations.................................................. 72575a • NG®evo conveyor components made from engineered
• Speedset™ brackets..................................................... 72590a plastic resin................................................................... 73700a
• Sideflexing belts............................................................ 72595a
• 2250 - Flight version..................................................... 72615a
• 2253RTC - Roller Top version........................................ 72625a
7 2 0 1 0 a
Revision 001
72010a
CONSTRUCTION DETAILS