Professional Documents
Culture Documents
GPEE6.0T01TIBBGDE
Page 1 of 1 Date of Issue : 16/03/2021
CONDITIONS Current ratings are calculated in accordance with IEC 60287-1-1 at an ambient air
temperature of 30Deg C and maximum operating temperature of 90Deg C. Cable assumed
horizontal on a non continuous bracket
Plastic duct in Air assumed. Calculations are based on one wire / cable per duct. The duct
medium temperature is assumed at 50 °C and the inner and outer dimensions of the duct are
26mm and 30mm respectively
Short Circuit Ratings
Symmetrical Fault Rating
kA
0,6
All dimensions on this data sheet are nominal unless otherwise stated and are subject to manufacturing tolerances.
The user is referred to the requirements of specification SANS 10142-1 for LV cable installations that are required to be adhered to.
Note must be taken by the user of the current ratings (SANS 10198-4), volt drop figures (SANS 10198-2) and other electrical performance data
for electric cables as given in specifications SANS 10142-1 and SANS10142-2.
Other supply lengths are available on request, please contact the nearest Aberdare Cables branch for details.
POSSIBLE SPECIFICATION CHANGES: Aberdare’s policy of continuous improvement may result in changes to the finished product, the
parameters of which may differ from the published parameters on the data sheet. Aberdare reserves the right to change product specifications
from time to time to effect improvements and /or enhancements and accepts no liability arising from any difference between the published
parameters of this data sheet and the finished product, unless by prior written agreement.
DISCLAIMER. Every effort has been made to ensure the information contained in these data sheets is correct. Aberdare disclaim responsibility
for any action , proceedings , liabilities , claims , damages , costs , losses and expense in relation to or arising out of incorrect utilisation of this
information.