Professional Documents
Culture Documents
2001 NSCP:
REINFORCED CONCRETE DESIGN 𝐴𝐴𝑔𝑔 𝑓𝑓′𝑐𝑐
𝜌𝜌𝑠𝑠 𝑚𝑚𝑚𝑚𝑚𝑚 = 0.45 � − 1�
𝐴𝐴𝑐𝑐ℎ 𝑓𝑓𝑦𝑦
COLUMN ANALYSIS 2010/2015 NSCP:
𝑃𝑃 = 0.85𝑓𝑓 ′ 𝑐𝑐 𝐴𝐴𝑐𝑐 + 𝐴𝐴𝑠𝑠 𝑓𝑓𝑦𝑦
𝑃𝑃𝑢𝑢 = Ø𝑃𝑃𝑛𝑛 𝜌𝜌𝑠𝑠 𝑚𝑚𝑚𝑚𝑚𝑚 :
Tied Column
Greater of (a) and (b):
Axial Capacity
𝐴𝐴𝑔𝑔 𝑓𝑓′𝑐𝑐
2001 NSCP: (a) 𝜌𝜌𝑠𝑠 𝑚𝑚𝑚𝑚𝑚𝑚 = 0.45 � − 1�
𝐴𝐴𝑐𝑐ℎ 𝑓𝑓𝑦𝑦
𝑃𝑃𝑛𝑛 = 0.80𝑃𝑃 (b) 𝜌𝜌𝑠𝑠 𝑚𝑚𝑚𝑚𝑚𝑚 = 0.12
𝑓𝑓′𝑐𝑐
𝑓𝑓𝑦𝑦
Ø = 0.70
2010/2015 NSCP:
𝑃𝑃𝑛𝑛 = 0.80𝑃𝑃 Dc = diameter of core measured from outer side of
Ø = 0.65 spiral
2001 and 2010 NSCP: 2. A square tied column carries an axial dead load of
560kN and an axial live load of 750kN. Assume f’c =
𝑃𝑃𝑛𝑛 = 0.85𝑃𝑃 28MPa and fy = 275MPa. Use 20mm diameter bars.
Determine the following using 2015 NSCP:
Ø = 0.75
a. Factored load that the column will carry.
b. Using a reinforcement ratio of 2%. Determine
Spacing of spiral
the required dimension of the column rounded
up to the nearest 10mm.
Clear spacing, s c
c. Required number of 20mm bars.
2001/2010 NSCP:
25mm < s c < 75mm
3. A spiral column having a diameter of 600mm is
reinforced with 8-28mm diameter vertical bars
2015 NSCP:
enclosed in a 10mm spiral. Concrete cover is 40mm.
Sc min = 25mm or 4/3d agg
Use f’c = 21MPa and Fy = 415 MPa for main bars and
Sc max = 75mm
Fy = 275 for transverse bars. Determine the following
using 2010 NSCP:
a. Ultimate axial capacity of the column.
b. Minimum spiral ratio.
c. Pitch of the spiral.
CE Board Nov. 2010 load of 4.80kPa. The columns E and H are omitted
4. A square tied column 450mm on sides is reinforced such that the girder BEHK supports the beams DEF
with eight 28-mm main bars equally spaced on all at E and GHI at H. Assume specific gravity of
concrete is 2.40. Use a load combination of 1.4D +
sides. Use clear cover of 40mm. Diameter of ties is
1.7L
12mm. Concrete f’c = 20.70MPa and steel yield
strength fy = 415MPa. Determine the following using
2001 NSCP:
a. Nominal axial load that the column can carry.
4416.49kN
b. Nominal balance load of the column.
1534.19kN
c. Nominal balance moment of the column.
440.13kN-m
S = 2.40m
L1 = L2 = L3 = 6.0m
b = 250mm
h = 450mm
t = 100mm