Professional Documents
Culture Documents
ACT-SOFT-VERIF-FAIL
On the Active Controller card, the Alarm severity is Critical (CR) and Service
Affecting (SA).
On the Standby Controller card, the Alarm severity is Minor (MN) and Non-
Service affecting (NSA En el indicador luminoso LED amarillo de la placa
muestra gravedad del controlador activo, la gravedad de la alarma es crítica
(CR) y que afecta al servicio (SA). En el indicador luminoso LED amarillo
de la placa muestra gravedad del controlador en espera, la gravedad de la
alarma es menor (MN) y que no afecta al servicio (NSA).
The working software running on the control card in the NCS system is
tampered with or the working software running on the system did not
originate from Cisco. El software de trabajo que se ejecuta en el vlaén
del control en el sistema NCS se manipula con o el software de trabajo
que se ejecuta en el sistema no originó de Cisco.
Problem present in the software stored in the protect or standby card
Procedure
Step 3 After the control card is activated, download the software on the standby
partition or the standby code volume on the protect flash.
If the troubleshooting procedure does not clear the alarm, log into the
Technical Support Website at
http://www.cisco.com/c/en/us/support/index.html or call the Cisco
Technical Assistance Center (1 800 553-2447) to report the problem.