Professional Documents
Culture Documents
hi Dear members ,
I was thinking , about a topic it is
What may the Transmission Engineer need in the Capacity of aggregation layer and
Access layer ?
The OSN 1800 Series can give you all what you need starting from E1 to 200G ,
Here I want to make overview on some of the OSN-1800 Types :-
1- OSN 1800 I Enhanced
I find this equipment amazing only 1U that can serve in many scenarios, the
Main board of it (A1UXCL) can work as ( System control, cross-connect, clock
board or Universal Line board , SDH Line , Ethernet Line board or Tributary
board )
In this small NE you can support (E1 , FE, GE ,
STM1,STM4,STM16,STM64,10GE,OTU1,OTU2,OTU2e)
Table 1 Logical boards of the TMA1UXCL board
Logical Logical Board Type Physical Port Basic Function
Board Type Boards That
Can Be
Configured
on the NMS
System A1UXCL System control, CLK/TOD/MON, Supports functions such as
control, cross- cross-connect, ALMI/O, ETH, and system control, service
connect, and A1SCC and clock board USB grooming, and clock processing.
clock board Grooms ODU0, ODU1, ODU2,
A1STG
ODU2e, ODUflex, VC-4, VC-3,
VC-12, and packet services.
Line board A1PSND2 Universal line OUT1/IN1 and Converts the SDH signals and
board OUT2/IN2 packet data packets whose total
(SDH/packet) bandwidth does not exceed 20
Gbit/s into two OTU2/OTU2e
signals for transmission.
A1SLND SDH line Transmits two STM-16/STM-
board 64 signals.
A1EX2 Universal line Transmits two 10GE LAN
board signals.
A1UND1 Universal line Converts OTN signals, SDH
board signals, and packet data packets
(OTN/SDH/pac whose total bandwidth does not
ket) exceed 5 Gbit/s into two OTU1
signals for transmission.
A1UND2 Universal line Converts OTN signals, SDH
board signals, and packet data packets
(OTN/SDH/pac whose total bandwidth does not
Table 1 Logical boards of the TMA1UXCL board
Logical Logical Board Type Physical Port Basic Function
Board Type Boards That
Can Be
Configured
on the NMS
ket) exceed 20 Gbit/s into two
OTU2/OTU2e signals for
transmission.
Tributary A1G12A Tributary TX1/RX1 and Transmits/Receives
board board TX2/TX2 10GE, GE (optical), and
FE (optical) signals when
functioning as a packet
board.
Transmits/Receives
STM-16, STM-4, and
STM-1 signals when
functioning as an SDH
board.
Transmits/Receives
STM-64, STM-16, STM-4,
STM-1, 10GE LAN, 10GE
WAN, GE (optical), and
FE (optical) signals when
functioning as an OTN
tributary board.
TX3/RX3 and Transmits/Receives
TX4/TX4 10GE, GE (optical), and
GE (electrical) signals
when functioning as a
packet service board.
Transmits/Receives
GE (optical/electrical)
signals when functioning as
an EoS board.
TX5/RX5 and Transmits/Receives
TX6/TX6 GE optical and electrical
signals when functioning as
a packet service board.
Transmits/Receives
GE (optical/electrical)
signals when functioning as
an EoS board.
TX7/RX7 and Transmits/Receives
TX8/TX8 GE (optical) and FE
(optical) signals when
functioning as a packet
board.
Transmits/Receives
STM-16, STM-4, and
STM-1 signals when
functioning as an SDH
board.
Transmits/Receives
STM-16, STM-4, STM-1,
Table 1 Logical boards of the TMA1UXCL board
Logical Logical Board Type Physical Port Basic Function
Board Type Boards That
Can Be
Configured
on the NMS
GE (optical), and FE
(optical) signals when
functioning as an OTN
tributary board.
GE1 to GE4 Transmits/Receives
GE (electrical) and FE
(electrical) signals when
functioning as a packet
service board.
Transmits/Receives
GE (electrical) and FE
(electrical) signals when
functioning as an EoS
board.
2- OSN 1800 II E
This enhanced version is suitable for aggregation , It is a bit bigger than OSN 1800I
with 8 slots .
The main board supports several scenarios as the customer wants , the
TNZ1UXCL/TNZ2UXCL Board can work as (System control, cross-connect, and
timing board or Universal line board (SDH+packet services) or TDM board or Packet
Board ).
the OptiX OSN 1800 II Enhanced chassis provides a maximum of 160G OTN
capacity, 160G packet capacity, and 50G SDH higher-order and 20G SDH lower-
order capacities .
Table 1 Application scenarios of the UXCL board
Application Logical Board on the NMS Board Type Basic Function
Scenario
Scenario 1 Z1UXCL System control, Provides the functions of a
(TNZ1UXCL cross-connect cross-connect, system control, cross-connect,
board)/Z2UXCL and timing timing board, and implements
(TNZ2UXCL cross-connect board cross-connections of ODUk (k =
board) 0, 1, 2, 2e, flex)/VC-4/VC-3/VC-
Z1SCC (system control 12 services and switching of
board) packet services.
Z1STG (timing board)