Professional Documents
Culture Documents
CONTRACT : LSTK
REVISION RECORD
ORIGINATED CHECKED APPROVED
REV DESCRIPTION DATE
BY BY BY
Nishant Sharma Muhammad Asim Rabee Zakaria
01B IFR – Issued for Review 05-Nov-20
ENVIRONMENT
Crane Location: Indoors Outdoors Both
N/A
Temperature: Max: 50°C Min: 0°C Seismic Zone: D Wind Design Load
Hazardous Area: Yes No If Yes, Specify Class Zone Group
Electrical Enclosure Type: IP 55
Unusual conditions (Dust, Fumes, Etc.), Yes, The area is desert with dust storms, sands storms with elements in like compounds
of calcium, silicon, magnesium, aluminum, potassium, chlorides and sodium which cause severe corrosion in high humidity conditions.
MECHANICAL DESIGN
Crane Design shall be in accordance with Crane Manufactures Assosiation of America (CMAA)
Specification: ( Single Girder Overhead Crane with overhung trolley )
Crane Service Classification: D Bridge: ISO Std. Classification Trolley: overhung
Plant Utilities: Electricity: 400 Volts 3 Phase 50 Hertz Air: N/A
TYPE
CRANE MOTIONS SPEEDS
Electric Air Manual
Hoist 2 Speed: (BY SUPPLIER)
Trolley 2 Speed: (BY SUPPLIER)
Bridge 2 Speed: (BY SUPPLIER)
Control Type Specify pendant push button control for long travel, cross travel and hoist motions.
Remarks:
1. All dimensions in meters unless otherwise noted.
2. Mark capacity (tons) and Buyer's Equipment on each side of bridge. Also mark capacity on both sides of hook
block. (Both in Engilish & Arabic)
3. Maximum Humidity: 99%
JO / EWO
DATA SHEET FOR DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT NO. REV NO.
JO NO.
ELECTRIC OVERHEAD TRAVELLING(EOT) CRANE DAT
EWO NO.
BUS MANUFACTURING FACILITY - - DN-DAT-008 2 OF 4 03G
JEDDAH SAUDI ARABIA
DOUBLE / SINGLE GIRDER EOT (BRIDGE) CRANES
BRIDGE CRANE MANUFACTURER
All asterisks must be filled by SUPPLIER and returned with Quotation
Number Of Girders Refer table at sheet 4 Type * Size *
Type Of Construction:
Type * No. Wheels * Wheel Diameter *
Wheel Material * Tread Hardness * Type Swiveling Type
Type Tread (Taper or Straight * Type Wheel Bearings *
Bearing Manufacturer * Minimum L-10 Life As Per applicable Crane Service Classification
Bridge Drive Type Gear Reducer Manufacturer *
No. Reductions * Type Gears * Enclosure *
Type Lubrication *
Bridge Brake (If Required) Type Yes Torque Rating 150% Manufacturer *
Type/ Size Bridle Rails *
Remarks Earthing to the crane shall be effected thru track rails and crane structure. All electrical equipments mounted
on crane shall be connected to its structure by means of earthing links.Crane end trucks shall be the swiveling type
End truck wheel shall be hardened to a minimum hardness of 375 BHN
TROLLEY
Trolley Frame Construction
Trolley Trucks Type * No. Wheels * Wheel Diameter *
Wheel Materials * Tread Hardness * Type *
Type Wheel Bearings * Bearing Manufacturer * L-10 Life *
Trolley Drive Type * Bearing Reducer Manufacturer *
No. Reductions * Type Gears * Enclosure *
Type Lubrication *
Trolley Brake (If Required) Type * Torque Rating * Manufacturer *
Type / Size Of Trolley Rails *
Remarks The wheel assemblies for the hoist trolley shall be the swiveling type
HOIST
Manufacturer * Model No. * Capacity Per ASME HST- 4, Class H5
Drum Diameter * Material *
Hoist Drive Type * Gear Reducer Manufacturer
No. Reductions * Type Gears * Enclosure *
Type Lubrication *
Wire Rope * Diameter * Construction * Core *
No. of Parts Supporting Load * Type Reeving *
Diameter of Sheaves Material *
Load Brake Type * Manufacturer * Torque Rating *
Motor Brake Type * Manufacturer * Torque Rating *
Hook Type * Material *
Limit Switches (Yes or No) Upper Yes Lower Yes Type * Manufacturer *
Remarks
MOTOR DATA
kW (hp) RPM m/sec Type Insulation Manufacturer
*Hoist * * * * * *
Trolley * * * * * *
Bridge * * * * * *
* Submit Speed Torque Curve For Hoist with Quotation Yes No
CONTROL DATA
Manufacturer * Location * NEMA Enclosure Class *
No of Speed Points * Hoist * Bridge * Trolley * Resistor's Class *
Control Station * Type * Location *
Remarks
POWER DISTRIBUTION
JO / EWO
DATA SHEET FOR DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT NO. REV NO.
JO NO.
ELECTRIC OVERHEAD TRAVELLING(EOT) CRANE DAT
EWO NO.
BUS MANUFACTURING FACILITY - - DN-DAT008 3 OF 4 03G
JEDDAH SAUDI ARABIA
EQUIPMENT SERVICE BUILDING
Assembly
outsourcing U-3X01,02,03 SG EOT 3 5 - - 19.5 m * * 8.5 m
parts storage
U-8X01,02,03,
Welding Ara SG EOT 4 5 19.5 m 8.5 m
04
Fire water
U-9X01 SG EOT 1 3 9m 6m
Shelter
where:
EOT- Electrical Overhead Travelling Crane
*-STA (SUPPLIER to advise)
JO / EWO
DATA SHEET FOR DWG. TYPE PLANT NO. INDEX DRAWING NO. SHT NO. REV NO.
JO NO.
ELECTRIC OVERHEAD TRAVELLING(EOT) CRANE DAT
EWO NO.
BUS MANUFACTURING FACILITY - - DN-DAT008 4 OF 4 03G
JEDDAH SAUDI ARABIA