Professional Documents
Culture Documents
87
Culvert
8.9
880.57 894.35
87
0.5mø
<--
6
8.7
87 8.74
To
87
2
8.0
876.55
2IL
Ku
901.40
87 8 6.4
900.84
7.7 77 2I
n
Ø100mm GROUTED (GRADE 30
da
4 . 11 L
87 7.06
sa
87
ng
8.0
NON-SHRINK) T25 SOIL NAIL IN
87 7.14
6
894.97
87
881.29 897.66
877.54
Co 5m w
6m LENGTH @ 1.5m C/C
0.
87 74.8 3
BH3
nc. ide
8
87
5.6 7I
7.1
5 L
dr a
886.48 893.48
1IL N 656223.694
87
9
877.01 901.96
877 .49IL
5.0 PROPOSED ERDOX TERRA
5. 6
878.09
in
876
87 E 767120.335
.17
888.65
877
A REINFORCED (TYPE B) 892.04 RL 896.01m
.18
874.13IL 896.01
0
600
Sump
END OF LINE T25 SOIL NAIL IN
874.12IL
903.09
875
876
.93 887.56
882.03 896.93
876.04
6m LENGTH @ 1.5 C/C
.44
Culvert 874
.84
1mø 889.15
SB B 886.09 895.34
87
872.48IL
883.2
0
877.32
600
4.5
5 893.28
875 .39I
876.99
BH2
874
870.08
875
.11 L
879.56 885.39
0
N 656205.902 891.36
.41
882.53
00
875.99
875.58 882.41
E 767064.874
0.
A
CH
87 876.42 889.26
4.2
1 880.75 881.87 884.01
RL 884.01m 904.13
870.37IL
m
891.85
886.94
00
60
878.72 883.4
00
878.82 882.34
.0
873.49 875.69 879.13 882.55
11
SGHR 100 MACMAT WITH
87
877.59
3.8
CH
879.71 881.71 884.08 887.52 891.09
B
1
871.77
868.17
873.72
873.63
877.45 884.00 889.02
HYDROSEEDING FINISH IF
869.12 875.99 878.46 879.76
867.25 873.33 C
877.87 880.11 884.24 886.14 887.14 EXPOSED SURFACE IS SOIL
873
Limit of 878.05
879.81 884.68
.39
903.13
slope failure 877.95 00
60
868.3 868.29
875.65 878.02 884.00 884.88
866.12
877.77
864.69
868.28
865.46 880.73
883.38
883.20 884.07 Ø100mm GROUTED (GRADE 30
877.15 NON-SHRINK) T25 SOIL NAIL IN 897.97
868.05
865.93
870.71
PROPOSED ERDOX
877.62
TERRA 881.59
880.29
882.37 6m LENGTH @ 1.5m C/C
PROPOSED ERDOX TERRA
864.53 C
REINFORCED (TYPE 878.02 B) 895.20
879.92
873.61
REINFORCED 856.13
(TYPE A)
Lim
87 879.99
861.9 0.5 880.08
it of
854.97IL
87 .48
868.57
Earth
7.6 IL
855.17
854.92
87 .53
7
870.07
87
874.09
6
drain
slop
00
863.39
877.09
.
58
e
87 .87
5.9 IL
86 875.86
CH
87 5.13
failu
5
9.4 House
87
3
6 873.29
re
879.38
864 .17
869 877
867.03 869 872.71 874.43 878.94IL
854.48 .84 .97 L
6I 879.2
860.55 873.59 6.8 6
.77 87 7.14
872 87 878.98
860.27 870 IL
.49 .1 6
872 2.61
3IL
864.04 87
854.6
852.2
879.87
871 House
2
878.89 Store
858.0
.16 8
87 .51
71 878.99
87
2.2 IL
.49
1
6
879.12
87
862.6
858.11
2.2
7
ERDOX TERRA REINFORCED
PROPOSED ERDOX TERRA REINFORCED (TYPE A) (TYPE B) AS WING WALL
885
875
870
865
Datum R.L 0.000m 860
875.821 875.821
Ground Level
CH 11.000
CH 16.648
CH 36.502
CH 58.000
CH 71.892
CH 84.537
CH 0.000
Chainage/Station (road1)
This proposal and/or presentation may contain any design, plans, methods, applications, drawings, renderings, Drawing
schematics, design studies, models and the like, that are made, drawn, created, drafted and/or invented ("Maccaferri PLAN & ELEVATION VIEW OF PROPOSED ERDOX
intellectual property") by Maccaferri (M) Sdn. Bhd. And its related corporations ("Maccaferri "). The Maccaferri intellectual Title: TERRA REINFORCED RETAINING SYSTEM KSM
property contained herein is merely for information and evaluation purposes only. All Maccaferri intellectual property shall
be owned by Maccaferri. Maccaferri reserves and retains all copyright and any other intellectual property rights and SLOPE REMEDIAL WORK AT KM 5.00, JALAN
interest in Maccaferri intellectual property at all times. You agree that you shall not obtain any rights whatsoever in the Project No: Client: Drawn: KIBBAS MOHIMBOYON KUNDASANG, SABAH
Maccaferri intellectual property. KSM
Drawing No: Units: Scale: Rev:
Checked:
MM/KDS/01
METRIC NTS 0 Printed on:
NOT FOR CONSTRUCTION
Rev: Issue / Revision: Drawn: App: Date: 06/09/2022
ERDOX TERRA
CH. 11.000 REINFORCED (TYPE B)
AS WING WALL
ELEVATION VIEW
BOUNDARY LINE
RL 880m
Ø75mm PERFORATED UPVC SUBSOIL PIPE
WRAPPED WITH GEOTEXTILE IN 4m LENGTH
@ 3m C/C; +3°~5° INCLINATION FROM HORIZONTAL SEE NOTE 1
. VARIES FROM
APPROX. 1.2m TO 5.1m
MIN.1000 APPROX. 3600 PROPOSED NEW ROAD
SLOPE HEIGHT
EROSION CONTROL MACMAT WITH ANCHOR RC TOE DRAIN
PIN MIN. 600mm DEPTH WITH HYDROSEEDING RC CASCADE DRAIN
ERDOX TERRA
REINFORCED (TYPE A) PROPOSED FINISHED
LEVEL RL 874.876m
Ø75mm PERFORATED UPVC
OUTLET PIPE @ 3m C/C
DRAINAGE COMPOSITE
.
RL 871.776m
CUT SLOPE ANGLE
APPROX. 21° TO 28°
15°
PROPOSED CUT SECTION
NOTE:
1. GUNITE FINISH IF EXPOSED SURFACE IS SHALE.
SGHR 100 MACMAT WITH HYDROSEEDING FINISH IF
EXPOSED SURFACE IS SOIL.
This proposal and/or presentation may contain any design, plans, methods, applications, drawings, renderings, Drawing
schematics, design studies, models and the like, that are made, drawn, created, drafted and/or invented ("Maccaferri CROSS SECTION A - A (CHAINAGE 11.000)
intellectual property") by Maccaferri (M) Sdn. Bhd. And its related corporations ("Maccaferri "). The Maccaferri intellectual Title:
KSM
property contained herein is merely for information and evaluation purposes only. All Maccaferri intellectual property shall
be owned by Maccaferri. Maccaferri reserves and retains all copyright and any other intellectual property rights and SLOPE REMEDIAL WORK AT KM 5.00, JALAN
interest in Maccaferri intellectual property at all times. You agree that you shall not obtain any rights whatsoever in the Project No: Client: Drawn: KIBBAS MOHIMBOYON KUNDASANG, SABAH
Maccaferri intellectual property. KSM
Drawing No: Units: Scale: Rev:
Checked:
MM/KDS/02
METRIC NTS 0 Printed on:
NOT FOR CONSTRUCTION
Rev: Issue / Revision: Drawn: App: Date: 06/09/2022
ERDOX TERRA REINFORCED (TYPE A) ERDOX TERRA REINFORCED (TYPE B)
3.1m HEIGHT x 3.6m WIDTH. 3.1m HEIGHT x 3.6m WIDTH.
FOUNDATION REALISED BY ANCHORAGE FOUNDATION REALISED BY RC BASE
BOUNDARY LINE
ORIGINAL SLOPE PROFILE
SEE NOTE 1
0
5
2
4
PIN MIN. 600mm DEPTH WITH HYDROSEEDING
RC CASCADE DRAIN
RC TOE DRAIN
ERDOX TERRA
15°
REINFORCED (TYPE A) PROPOSED FINISHED
LEVEL RL 873.674m
Ø75mm PERFORATED UPVC
OUTLET PIPE @ 3m C/C
MACDRAIN W1061
DRAINAGE COMPOSITE
.
T25 SOIL NAIL IN 6m LENGTH @ 1.5m C/C
CUT SLOPE ANGLE
APPROX. 35° TO 45°
15°
PROPOSED CUT SECTION
NOTE:
1. GUNITE FINISH IF EXPOSED SURFACE IS SHALE.
SGHR 100 MACMAT WITH HYDROSEEDING FINISH IF
EXPOSED SURFACE IS SOIL.
This proposal and/or presentation may contain any design, plans, methods, applications, drawings, renderings, Drawing
schematics, design studies, models and the like, that are made, drawn, created, drafted and/or invented ("Maccaferri
Title: CROSS SECTION B - B (CHAINAGE 25.000)
intellectual property") by Maccaferri (M) Sdn. Bhd. And its related corporations ("Maccaferri "). The Maccaferri intellectual KSM
property contained herein is merely for information and evaluation purposes only. All Maccaferri intellectual property shall
be owned by Maccaferri. Maccaferri reserves and retains all copyright and any other intellectual property rights and SLOPE REMEDIAL WORK AT KM 5.00, JALAN
interest in Maccaferri intellectual property at all times. You agree that you shall not obtain any rights whatsoever in the Project No: Client: Drawn: KIBBAS MOHIMBOYON KUNDASANG, SABAH
Maccaferri intellectual property. KSM
Drawing No: Units: Scale: Rev:
Checked:
MM/KDS/03
METRIC NTS 0 Printed on:
NOT FOR CONSTRUCTION
Rev: Issue / Revision: Drawn: App: Date: 06/09/2022
ERDOX TERRA
REINFORCED (TYPE A)
ELEVATION VIEW
CH. 58.000
BOUNDARY LINE
ERDOX TERRA
REINFORCED (TYPE B)
AS WING WALL
DOWNSLOPE UPSLOPE
15°
ERDOX TERRA PROPOSED FINISHED
REINFORCED (TYPE A) LEVEL RL 872.049m
.
RL 868.949m
CUT SLOPE ANGLE
APPROX. 45° TO 65°
15°
PROPOSED CUT SECTION
COLLECTOR PIPE
NOTE:
1. GUNITE FINISH IF EXPOSED SURFACE IS SHALE.
SGHR 100 MACMAT WITH HYDROSEEDING FINISH IF
EXPOSED SURFACE IS SOIL.
This proposal and/or presentation may contain any design, plans, methods, applications, drawings, renderings, Drawing
schematics, design studies, models and the like, that are made, drawn, created, drafted and/or invented ("Maccaferri
intellectual property") by Maccaferri (M) Sdn. Bhd. And its related corporations ("Maccaferri "). The Maccaferri intellectual Title: CROSS SECTION C - C (CHAINAGE 58.000)
KSM
property contained herein is merely for information and evaluation purposes only. All Maccaferri intellectual property shall
be owned by Maccaferri. Maccaferri reserves and retains all copyright and any other intellectual property rights and SLOPE REMEDIAL WORK AT KM 5.00, JALAN
interest in Maccaferri intellectual property at all times. You agree that you shall not obtain any rights whatsoever in the Project No: Client: Drawn: KIBBAS MOHIMBOYON KUNDASANG, SABAH
Maccaferri intellectual property. KSM
Drawing No: Units: Scale: Rev:
Checked:
MM/KDS/04
METRIC NTS 0 Printed on:
NOT FOR CONSTRUCTION
Rev: Issue / Revision: Drawn: App: Date: 06/09/2022
BOUNDARY LINE
SEE NOTE 1
BOUNDARY LINE
38°
APPROX. RL 878m
3
0
4
3
APPROX. 1.5 m TO 4.2m
RC TOE DRAIN
PROPOSED FINISHED LEVEL
15°
RL 872.749m TO RL 871.292m
APPROX. RL 871m TO
RL 867.92m
.
T25 SOIL NAIL IN 6m LENGTH @ 1.5m C/C
CUT SLOPE ANGLE
APPROX. 35° TO 45°
22°
NOTE:
1. GUNITE FINISH IF EXPOSED SURFACE IS SHALE.
SGHR 100 MACMAT WITH HYDROSEEDING FINISH IF
EXPOSED SURFACE IS SOIL.
This proposal and/or presentation may contain any design, plans, methods, applications, drawings, renderings, Drawing Project:
schematics, design studies, models and the like, that are made, drawn, created, drafted and/or invented ("Maccaferri TYPICAL CROSS SECTION Designed:
intellectual property") by Maccaferri (M) Sdn. Bhd. And its related corporations ("Maccaferri "). The Maccaferri intellectual Title: (CHAINAGE 58.000 TO CH. 105.000) KSM
property contained herein is merely for information and evaluation purposes only. All Maccaferri intellectual property shall
be owned by Maccaferri. Maccaferri reserves and retains all copyright and any other intellectual property rights and SLOPE REMEDIAL WORK AT KM 5.00, JALAN
interest in Maccaferri intellectual property at all times. You agree that you shall not obtain any rights whatsoever in the Project No: Client: Drawn: KIBBAS MOHIMBOYON KUNDASANG, SABAH
Maccaferri intellectual property. KSM
Drawing No: Units: Scale: Rev:
Checked:
MM/KDS/05
METRIC NTS 0 Printed on:
SS
NOT FOR CONSTRUCTION
Rev: Issue / Revision: Drawn: App: Date: 06/09/2022
SIDE VIEW
DETAIL OF ROPE CONNECTION NOTES:
SECONDARY STEEL WIRE MESH
HEB 120 STEEL BEAM STEEL PLATE 1. ERDOX TERRA REINFORCED DESCRIPTION:
100x60x20mm THK.
BASE OF STRUCTURE 3.1m - 3.6m The entire structure (the full kit consists of carpentry, steel ropes,
facing made of steel wire mesh or wire rope panel and accessories) is
FILLET WELD
SPHERICAL JOINT - MAX 18000 kg BOLT Ø 20 x 160 7mm THK. CE marked in compliance with the Regolamento Europeo Prodotti da
GRADE 10.9 Costruzione (CPR 305/11) or, in alternative, with CVT (Certificato di
Valutazione Tecnica), issued by Consiglio Superiore dei Lavori
Pubblici, according to the DM 17/01/2018 (Norme Tecniche per le
Costruzioni) specifications for all the construction materials and
products for structural use. Each structure shall be produced under a
TUBE Ø 88.9 5mm THK.
quality process according to UNI EN ISO 9001:2015. The
FILLET WELD 7mm THK.
pre-assembled mono-anchored structure shall be characterised by a
AM
3. POLIMAC POLYMER COATING PERFORMANCE:
BE
D
a) Resistance to UV radiation: the tensile strength and elongation at
DE
VI
DETAIL OF THE CARVING OF ENTIRE BEAM break of the base compound after 2,500 hours of exposure to QUV-A
DI
DETAIL OF THE SPHERICAL JOINT
STEEL PLATE
(ISO 4892-3 mode 1) do not change more than 25% from the initial
BOLTS 10mm THK. test results.
Ø20mm
STEEL CABLE MESH Ø 8mm, b) Outwearing accelerated aging test: When subjected to the neutral
OPENING 300x300mm WITH salt spray tests (EN ISO 9227) after 6000 hours of exposure
HEB 120
AM
PERIMETER STEEL ROPE Ø12mm
the mesh shall not show more than 5% of DBR (Dark Brown
BE
STEEL BEAM
D
Rust).
DE
VI
DI
4. MacDrain W1061 PERFORMANCE:
HEB 120 a) In-plane flow capacity (soft/soft contact): Not less than 1.5
STEEL BEAM
DETAIL OF THE CARVING ON THE DIAGONALS Litre/(m.s) at i= 1 at 20kPa pressure as per EN ISO 12958.
DETAIL OF END CONNECTION b) Tensile Strength (MD): Not less than 16.5kN/m as per EN ISO
STIFFENER PLATE 10mm THK. 10319.
BRACING CABLE (N° 08)
STEEL WIRE ROPE Ø16 MM (UNI EN 12385-4) 5. INSTALLATION:
ZINC COATED (UNI EN 10264-2)
BOLT M30x160 GRADE 8.8 Please refer to Maccaferri installation guidelines.
6. FOUNDATION:
STEEL PLATE 10mm THK.
2A 2A HEB 120 STEEL BEAM RSS foundation as per Project Consultant design.
BOLT M27x160 GRADE 8.8
7. DRAINAGE:
ANCHORAGE TYPE FOUNDATION
Geocomposite drainage is based on the assumption that the
BOLT M27x220 GRADE 8.8 2B 2B transmissivity required is less than the proposed in-plane flow
capacity . Project Consultant to advise if higher capacity is required
based on the subsurface investigation and actual site condition.
CONNECTED TO
ANCHORAGE SYSTEM
Surface drainage to Project Consultant design to prevent surface
runoff infiltration into the reinforced soil structure.
CENTRAL NODE
LENGTH FROM 3 m TO 6 m
PLAN VIEW
This proposal and/or presentation may contain any design, plans, methods, applications, drawings, renderings, Drawing Project:
schematics, design studies, models and the like, that are made, drawn, created, drafted and/or invented ("Maccaferri ERDOX TERRA REINFORCED STRUCTURE Designed:
intellectual property") by Maccaferri (M) Sdn. Bhd. And its related corporations ("Maccaferri "). The Maccaferri intellectual Title: (TYPE A) KSM
property contained herein is merely for information and evaluation purposes only. All Maccaferri intellectual property shall
be owned by Maccaferri. Maccaferri reserves and retains all copyright and any other intellectual property rights and
SLOPE REMEDIAL WORK AT KM 5.00, JALAN
interest in Maccaferri intellectual property at all times. You agree that you shall not obtain any rights whatsoever in the Project No: Client: Drawn: KIBBAS MOHIMBOYON KUNDASANG, SABAH
Maccaferri intellectual property. KSM
Drawing No: Units: Scale: Rev:
Checked:
MM/KDS/06
METRIC NTS 0 Printed on:
SS
NOT FOR CONSTRUCTION
Rev: Issue / Revision: Drawn: App: Date: 06/09/2022
NOTES:
DETAIL OF ROPE CONNECTION 1. ERDOX TERRA REINFORCED DESCRIPTION:
SIDE VIEW
The entire structure (the full kit consists of carpentry, steel ropes,
HEB 120 STEEL BEAM STEEL PLATE facing made of steel wire mesh or wire rope panel and accessories) is
SECONDARY STEEL WIRE MESH 100x60x20mm THK. CE marked in compliance with the Regolamento Europeo Prodotti da
BASE OF STRUCTURE 3.1m - 3.6m
Costruzione (CPR 305/11) or, in alternative, with CVT (Certificato di
FILLET WELD
SPHERICAL JOINT - MAX 18000 kg BOLT Ø 20 x 160 7mm THK.
Valutazione Tecnica), issued by Consiglio Superiore dei Lavori
GRADE 10.9 Pubblici, according to the DM 17/01/2018 (Norme Tecniche per le
Costruzioni) specifications for all the construction materials and
products for structural use. Each structure shall be produced under a
quality process according to UNI EN ISO 9001:2015. The
pre-assembled mono-anchored structure shall be characterised by a
TUBE Ø 88.9 5mm THK.
design load not lower than 540 kN, with front facing of about 11 sqm
FILLET WELD 7mm THK.
and bottom folding. The central tie rod length shall be between 3.0 m
AM
break of the base compound after 2,500 hours of exposure to QUV-A
BE
ED
(ISO 4892-3 mode 1) do not change more than 25% from the initial
ID
test results.
V
DETAIL OF THE CARVING OF ENTIRE BEAM
DI
DETAIL OF THE SPHERICAL JOINT b) Outwearing accelerated aging test: When subjected to the neutral
STEEL PLATE
BOLTS 10mm THK. salt spray tests (EN ISO 9227) after 6000 hours of exposure
STEEL CABLE MESH Ø 8mm,
Ø20mm the mesh shall not show more than 5% of DBR (Dark Brown
OPENING 300x300mm WITH Rust).
HEB 120
AM
PERIMETER STEEL ROPE Ø12mm
BE
STEEL BEAM
D
4. MacDrain W1061 PERFORMANCE:
DE
VI
a) In-plane flow capacity (soft/soft contact): Not less than 1.5
DI
Litre/(m.s) at i= 1 at 20kPa pressure as per EN ISO 12958.
HEB 120 b) Tensile Strength (MD): Not less than 16.5kN/m as per EN ISO
STEEL BEAM
DETAIL OF THE CARVING ON THE DIAGONALS 10319.
DETAIL OF END CONNECTION
STIFFENER PLATE 10mm THK.
5. INSTALLATION:
BRACING CABLE (N° 08) Please refer to Maccaferri installation guidelines.
STEEL WIRE ROPE Ø16 MM (UNI EN 12385-4)
ZINC COATED (UNI EN 10264-2) 6. FOUNDATION:
BOLT M30x160 GRADE 8.8
RSS foundation as per Project Consultant design.
CONCRETE PLATE
CENTRAL NODE
PLAN VIEW
This proposal and/or presentation may contain any design, plans, methods, applications, drawings, renderings, Drawing Project:
schematics, design studies, models and the like, that are made, drawn, created, drafted and/or invented ("Maccaferri ERDOX TERRA REINFORCED STRUCTURE Designed:
intellectual property") by Maccaferri (M) Sdn. Bhd. And its related corporations ("Maccaferri "). The Maccaferri intellectual Title: (TYPE B) KSM
property contained herein is merely for information and evaluation purposes only. All Maccaferri intellectual property shall SLOPE REMEDIAL WORK AT KM 5.00, JALAN
be owned by Maccaferri. Maccaferri reserves and retains all copyright and any other intellectual property rights and
interest in Maccaferri intellectual property at all times. You agree that you shall not obtain any rights whatsoever in the Project No: Client: Drawn: KIBBAS MOHIMBOYON KUNDASANG, SABAH
Maccaferri intellectual property. KSM
Drawing No: Units: Scale: Rev:
Checked:
MM/KDS/07
METRIC NTS 0 Printed on:
SS
NOT FOR CONSTRUCTION
Rev: Issue / Revision: Drawn: App: Date: 06/09/2022
3000mm WIDTH
SLOPE HEIGHT
.
POLYPROPYLENE.
NTS MINIMUM
DURABILITY PERFORMANCES
REQUIREMENTS
MAX 150mm
.
ALL ROPES TO BE CONNECTED TO
3000
DETAIL A
100mm 100mm
Safety Factor
-10
0.000
0.250
0.500
0.750
1.000
1.250 1.775
1.500
1.750
2.000
2.250
-20
2.500
2.750
3.000
3.250
20.00 kN/m2
3.500 W
3.750
4.000
4.250
4.500 35.00 kN/m2
4.750
-30
5.000
5.250
5.500
5.750
6.000+
Max Axial Force = 106 kN @ FOS of 2
W
-40
Calculated
Automa cally
fill 19 Mohr-Coulomb 0 29 Water Surface
Calculated
Safety Factor
0.000
0.250
0.15
0.500 1.521
0.750
-10
1.000
1.250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
3.250
-20
3.500
3.750
4.000
4.250 W
4.500
4.750
5.000
5.250 35.00 kN/m2
5.500
-30
5.750
6.000+
W
-40
Automa cally
shale 27 Generalised Hoek-Brown 75000 0.49251 0.000418942 0.522344 Water Surface
Calculated
Automa cally
fill 19 Mohr-Coulomb 0 29 Water Surface
Calculated
1.000
1.250
1.500
1.750
2.000
2.250
-20
2.500
2.750
3.000
3.250
3.500
20.00 kN/m2 W
3.750
-25
4.000
4.250
4.500
4.750
5.000 35.00 kN/m2
5.250
-30
5.500
5.750
6.000+
W
-40
Calculated
Automa cally
s2 18.7 Mohr-Coulomb 10 25 Water Surface
Calculated
Automa cally
s3 20 Mohr-Coulomb 25 25 Water Surface
Calculated
Automa cally
shale 27 Generalised Hoek-Brown 75000 0.49251 0.000418942 0.522344 Water Surface
Calculated
Automa cally
fill 19 Mohr-Coulomb 0 29 Water Surface
-50
Calculated
0.000 1.515
0.250
0.15
0.500
0.750
1.000
1.250
1.500
1.750
2.000
2.250
2.500
-20
2.750
3.000
3.250
3.500
3.750 W
4.000
4.250
4.500
4.750
5.000 35.00 kN/m2
5.250
-30
5.500
5.750
6.000+
W
-40
Automa cally
fill 19 Mohr-Coulomb 0 29 Water Surface
Calculated
Page 1 of 2 edesign.maccaferri.com
Coating ---
Type of mesh Steelgrid HR 100
Geometry
Description Symbol Value Unit
Slope Height H 11.0 m
Slope Angle β 45.0 deg
Length of the slope L 15.56 m
Unstable Soil Thickness s 2.2 m
Tension Crack z -2.0 m
Water Table
Description Symbol Value Unit
Water table depth dw 0.5 m
Hydraulic head Hw 2.6 m
Geotechnical Parameters
Description Symbol Value Unit
Soil Friction Angle φ 23.0 deg
Effective Cohesion c’ 16.0 kPa
Unit Weight γ 19.0 kN/m³
Saturated Unit Weight γsat 19.0 kN/m³
Seismic Coefficients
Description Symbol Value Unit
Vertical seismic coefficient kv -
Horizontal seismic coefficient kh -
Mac S-design | Copyright© 2018 - 2022 | v 20220322 | All Rights Reserved © Officine Maccaferri Spa 2020 | Notice: The results are provided under the “Software terms and conditions” disclosure
agreement available under the personal area at https://edesign.maccaferri.com/
Mac S-design - Technical Report
Soil Slope design software
Page 2 of 2 edesign.maccaferri.com
Pre-analysis Result
FS0 0.98
Computed tension crack depth [m] 2.54
Analysis
Mesh Check Verified
Factor of Safety 2.0
Max mesh Working Ratio [%] 14.5
Max Nd [kN] 29.7
Md [kN m] 1.19
Nyd [kN] 225.8
Myd [kN m] 1.2
M-N check Verified
Computed tension crack depth [m] 3.11
Anchors Parameters
Description Symbol Value Unit
Nail pattern - Squared -
Anchors spacing l 2.0 m
External Bar Diameter φe 25.0 mm
Internal Bar Diameter φi 0.0 mm
Drilling hole diameter d 100.0 mm
Corrosion Crown c 0.0 mm
Grout-soil limit bond stress Tb 0.2 MPa
Steel Yield stress fyy 460.0 MPa
Partial Factor on bond stress γb 1.0 -
Partial Factor on pull-out force γF 1.0 -
Partial Factor on Steel γs 1.0 -
Cross Sectional Area As 490.87 mm²
Bar Radius - Thickness t 12.5 mm
Amplifying Factor as for Bustamante Doix α 1.0 -
Anchors Analysis
Effective length [m] 0.47
Total length [m] 4.00
Pull-out Check Verified
Shear Check Verified
Mac S-design | Copyright© 2018 - 2022 | v 20220322 | All Rights Reserved © Officine Maccaferri Spa 2020 | Notice: The results are provided under the “Software terms and conditions” disclosure
agreement available under the personal area at https://edesign.maccaferri.com/