Professional Documents
Culture Documents
Usermenu Gas Supply Settings V1.0
Usermenu Gas Supply Settings V1.0
The device features an option-dependent user menu as well as a service menu. Menu control
Device parameters can be changed before surgery in the user menu. The following
pages list a user menu overview. The service menu is protected from unauthorized
access by a numeric code only known to the service technician.
1. Initial Status: The device is turned off. Keep the menu key ⑤ depressed How do I use the user menu?
while briefly pressing the On/Standby key①as well.
2. Continue pressing the menu key until the LED test is finished.
3. Increasingly louder beeps are emitted after the end of the LED test and P is
displayed in the display field for the actual pressure ⑭The device is now in
the first menu level of the user menu.
4. Switch between user and service menu with the +/- keys⑦
5. Confirm the user menu selection with the menu key⑤
6. The values to be set are depicted in the actual gas flow ⑫ display field. The
factory default values are initially displayed - then the last saved value.
7. Use the nominal gas flow Plus or nominal gas flow Minus keys⑦ to select
the desired menu level.
8. Press the Menu key to access the selected menu level. Scroll with the nominal
gas flow Plus or Minus key⑦ to change settings.
9. Save settings with menu key ⑤ You are then automatically switched to the
next higher menu level.
10. Press the reset key ⑥ to exit menu level without saving.
11. Turn the device off and wait 10 seconds before turning back on to enter normal
mode.
12.. Menu P11 is gas supply setting,“01”means bottle mode、“02”means house mode
F104 Usermenu_gas supply setting
Device parameters are changed before surgery with the user menu. The device
features 13 menu levels:
• Language
• Volume
• Occlusion
• Max. nominal pressure
• Gas Flow Rate 1
• Gas Flow Rate 2
• Gas Flow Rate 3
• First pressure value
• Venting system
• Venting time
• Venting pressure
• Gas supply
• Contrast
Menu key (i) (14): Menu selection and confirming key.
Reset key (->0<-) (13): Back to main level, "Escape" key.
Nominal flow keys (+)/(-) (11)/ (12): Scroll function.
1. Press the (i) key (14) to access the selected menu. How do I use the user menu?
2. The user menu or service menu is selected by scrolling with the nominal gas
flow (+) key (11) or nominal gas flow (-) key (12). Select the user menu and
press the (i) key (14) to open the first menu level.
3. Use the nominal gas flow (+) key (11) or (-) key (12) to select the desired menu
level. Press the (i)- key (14) to access the selected menu level. Select a menu
item to access the associated submenu.
4. Scroll with the nominal gas flow (+) or (-) key to change settings in the submenu.
Press the (i) key to save the desired setting. To exit the user menu,
press the (->0<-) key twice.
5. To exit the user menu, press the (->0<-) key (13) twice.
6. The eighth menu is gas supply setting,Select the corresponding mode Press the (i)