The document outlines various sources of heat gain for a building including:
1. Heat gain from the building envelope through opaque walls, interior glazing, floors/ceilings, and roof/ceiling assemblies.
2. Heat gain from windows in different areas of the building.
3. Heat gain from outdoor infiltration through windows and doors.
4. Heat gain from occupants, artificial lighting, and appliances/equipment.
The total sensible and latent heat loads are calculated, resulting in a total heat load and required cooling load of approximately 111,706 watts.
The document outlines various sources of heat gain for a building including:
1. Heat gain from the building envelope through opaque walls, interior glazing, floors/ceilings, and roof/ceiling assemblies.
2. Heat gain from windows in different areas of the building.
3. Heat gain from outdoor infiltration through windows and doors.
4. Heat gain from occupants, artificial lighting, and appliances/equipment.
The total sensible and latent heat loads are calculated, resulting in a total heat load and required cooling load of approximately 111,706 watts.
The document outlines various sources of heat gain for a building including:
1. Heat gain from the building envelope through opaque walls, interior glazing, floors/ceilings, and roof/ceiling assemblies.
2. Heat gain from windows in different areas of the building.
3. Heat gain from outdoor infiltration through windows and doors.
4. Heat gain from occupants, artificial lighting, and appliances/equipment.
The total sensible and latent heat loads are calculated, resulting in a total heat load and required cooling load of approximately 111,706 watts.
Material R-Value Area Outside air film 0.12 150mm Concrete 0.43 Opaque Wall 1 Inside air film 0.044 Total 0.594 15 U-value 1.683502 Outside air film 0.044 150mm Gypsum Drywall 4.58 Opaque Wall 2 Inside air film 0.044 Total 4.668 20 U-value 0.214225 Outside air film 0.044 150mm Gypsum Drywall 0.43 Opaque Wall 3 Inside air film 0.044 Total 0.518 20 U-value 0 Outside air film 0.12 150mm Concrete 0.43 Opaque Wall 4 Inside air film 0.044 Total 0.594 15 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 4.58 Opaque Wall 5 Inside air film 0.044 Total 4.668 18 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 0.43 Opaque Wall 6 Inside air film 0.044 Total 0.518 18 U-value 0
6mm clear glass on Alum 6.23
Interior Glazing Total 6.23 17.5 U-value 0.160514 Inside air film 0.044 150mm Concrete Sab 0.43 Inside Airfilm 0.044 Floor (ceiling assembly below) Acoustic Board 0.33 Inside air film 0.044 Total 0.892 225 U-value 1.121076 Outside air film 0.12 GI Sheet 0.01 Glass Wool Insulation 1.94 Inside Air Film 0.044 Roof and Ceiling Assembly Acoustic Board 0.33 Inside air film 0.044 Total 2.488 225 U-value 0.401929
Total Heat Gain (W)
II. Heat Gain from Windows
Materials a. Windows at (NE) Regular Single pane clear b. Windows at Board Room (NW) Floor to ceiling Window c. Windows at NE Regular Single pane clear Total Heat Gain (W)
III. Heat Gain from Outdoor Infiltration
Materials a. Windows (total area) Regular Single pane clear b. Doors (total area) Regular Single pane clear Total Heat Gain (W) IV. Heat Gain from Occupant Activities Seated
Total Heat Gain (W)
V. Heat Gain from Artificial Lighting
4-18w Troffer Fluorescent Light
Total Heat Gain (W) VI. Heat Gain from Appliance and Equipment Appliance/Equipment Projector Computer Laptop Sound System with 4-100W Speaker Sound System with 12-100W Speaker Total Heat Gain (W)
TOTAL SENSIBLE HEAT (TOTAL I-VI)
LATENT HEAT LOAD (30% OF SENSIBLE HEAT) TOTAL HEAT LOAD
COOLING LOAD REQUIREMENT
lope Th-Tl QC 1
19 169.29
11 1026.96
11 113.96
19 169.29
11 924.264
11 102.564
11 1199.275
19 3813.3
11 6157.8
Total Heat Gain (W) 13676.703
II. Heat Gain from Windows
DCLF Area QW 60 9 540 85 36 3060 45 2.25 262.8 Total Heat Gain (W) 3862.8
eat Gain from Outdoor Infiltration
INF Area QW 4 9 36 2 5.625 11.25 Total Heat Gain (W) 47.25 IV. Heat Gain from Occupant No. (#) Sens Heat QW 104 2.25 234 Total Heat Gain (W) 234 Heat Gain from Artificial Lighting no. (#) watt QW 4 72 288 Total Heat Gain (W) 288 Gain from Appliance and Equipment no. (#) Watt QW 2 800 1600 4 250 1000 24 65 1560 4 100 400 12 100 1200 Total Heat Gain (W) 5760
TOTAL SENSIBLE HEAT (TOTAL I-VI) 23868.753
AT LOAD (30% OF SENSIBLE HEAT) 7160.6259 TOTAL HEAT LOAD 31029.3789
COOLING LOAD REQUIREMENT 111,705.76
I. Heat Gain from Building Envelope Material R-Value Area Th-Tl QC Outside air film 0.12 150mm Concrete 0.43 Opaque Wall 1 Inside air film 0.044 Total 0.594 12 19 135.432 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 4.58 Opaque Wall 2 Inside air film 0.044 Total 4.668 18 11 924.264 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 0.43 Opaque Wall 3 Inside air film 0.044 Total 0.518 18 11 102.564 U-value 0 Outside air film 0.12 150mm Concrete 0.43 Opaque Wall 4 Inside air film 0.044 Total 0.594 12 19 135.432 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 4.58 Opaque Wall 5 Inside air film 0.044 Total 4.668 16 11 821.568 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 0.43 Opaque Wall 6 Inside air film 0.044 Total 0.518 16 11 91.168 U-value 0
6mm clear glass on Alum 7.23
Interior Glazing Total 7.23 17.5 11 1391.775 U-value 0 Inside air film 0.044 150mm Concrete Sab 0.43 Inside Airfilm 0.044 Floor (ceiling assembly below) Acoustic Board 0.33 Inside air film 0.044 Total 0.892 225 19 3813.3 U-value 0 Outside air film 0.12 GI Sheet 0.01 Glass Wool Insulation 1.94 Inside Air Film 0.044 Roof and Ceiling Assembly Acoustic Board 0.33 Inside air film 0.044 Total 2.488 225 11 6157.8 U-value 0
Total Heat Gain (W) 12422.57
II. Heat Gain from Windows
Materials DCLF Area QW a. Windows at NE Regular Single pane clear 89 9 801 b. Windows at NW Regular Single pane clear 89 36 3204 c. Windows at NE Regular Single pane clear 89 2.25 262.8 Total Heat Gain (W) 4267.8
III. Heat Gain from Outdoor Infiltration
Materials INF Area QW a. Windows (total area) Regular Single pane clear 6.5 9 58.5 b. Doors (total area) Regular Single pane clear 6.5 5.625 36.5625 Total Heat Gain (W) 95.0625 IV. Heat Gain from Occupant No. (#) Sens Heat QW Activities Seated 104 2.25 234 Total Heat Gain (W) 234 V. Heat Gain from Artificial Lighting no. (#) watt QW 4-18w Troffer Fluorescent Light 4 72 288 Total Heat Gain (W) 288 VI. Heat Gain from Appliance and Equipment Appliance/Equipment no. (#) Watt QW Projector 2 800 1600 Computer 4 250 1000 Laptop 24 65 1560 Sound System with 4-100W Speaker 4 100 400 Sound System with 12-100W Speaker 12 100 1200 Total Heat Gain (W) 5760
TOTAL SENSIBLE HEAT (TOTAL I-VI) 23067.4335
LATENT HEAT LOAD (30% OF SENSIBLE HEAT) 6920.23005 TOTAL HEAT LOAD 29987.66355
COOLING LOAD REQUIREMENT 107,955.59
I. Heat Gain from Building Envelope 1
Material R-Value Area Th-Tl QC
Outside air film 0.12
150mm Concrete 0.43 Opaque Wall 4 Inside air film 0.044 Total 0.594 -7 -33 137.214 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 4.58 Opaque Wall 5 Inside air film 0.044 Total 4.668 -38 -87 15432.41 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 0.43 Opaque Wall 6 Inside air film 0.044 Total 0.518 -38 -87 1712.508 U-value 0
6mm clear glass on Alum 7.23
Interior Glazing Total 7.23 0 U-value 0.138313 Inside air film 0.044 150mm Concrete Sab 0.43 Inside Airfilm 0.044 Floor (ceiling assembly below) Acoustic Board 0.33 Inside air film 0.044 Total 0.892 0 U-value 1.121076 Outside air film 0.12 GI Sheet 0.01 Glass Wool Insulation 1.94 Inside Air Film 0.044 Roof and Ceiling Assembly Acoustic Board 0.33 Inside air film 0.044 Total 2.488 0 U-value 0.401929
Total Heat Gain (W) 0
II. Heat Gain from Windows
Materials DCLF Area QW a. Windows at NE Regular Single pane clear -98.8 -206.6 20412.08 b. Windows at NW Regular Single pane clear -44.8 -125.6 5626.88 c. Windows at NE Regular Single pane clear 273.2833 346.2833 419.2833 Total Heat Gain (W) 26458.24
III. Heat Gain from Outdoor Infiltration
Materials INF Area QW a. Windows (total area) Regular Single pane clear 14 19 266 b. Doors (total area) Regular Single pane clear 9.25 12.875 119.0938 Total Heat Gain (W) 385.0938 IV. Heat Gain from Occupant No. (#) Sens Heat QW Activities Seated -99.5 -201.25 20024.38 Total Heat Gain (W) 20024.38 V. Heat Gain from Artificial Lighting no. (#) watt QW 4-18w Troffer Fluorescent Light 114 156 17784 Total Heat Gain (W) 17784 VI. Heat Gain from Appliance and Equipment Appliance/Equipment no. (#) Watt QW Projector 1598 2396 3828808 Computer 496 742 368032 Laptop 106 147 15582 Sound System with 4-100W Speaker 196 292 57232 Sound System with 12-100W Speaker 188 276 51888 Total Heat Gain (W) 4321542
TOTAL SENSIBLE HEAT (TOTAL I-VI) 4386194
LATENT HEAT LOAD (30% OF SENSIBLE HEAT) 1315858 TOTAL HEAT LOAD 5702052
COOLING LOAD REQUIREMENT 73,796.93
I. Heat Gain from Building Envelope Material R-Value Area Th-Tl QC 1 Outside air film 0.12 150mm Concrete 0.43 Opaque Wall 1 Inside air film 0.044 Total 0.594 -59 -85 2978.91 U-value 1.683502 Outside air film 0.044 150mm Gypsum Drywall 4.58 Opaque Wall 2 Inside air film 0.044 Total 4.668 -46 -65 13957.32 U-value 0.214225 Outside air film 0.044 150mm Gypsum Drywall 0.43 Opaque Wall 3 Inside air film 0.044 Total 0.518 -91 -125 5892.25 U-value 0 Outside air film 0.12 150mm Concrete 0.43 Opaque Wall 4 Inside air film 0.044 Total 0.594 -59 -85 2978.91 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 4.58 Opaque Wall 5 Inside air film 0.044 Total 4.668 -136 -185 117446.9 U-value 0 Outside air film 0.044 150mm Gypsum Drywall 0.43 Opaque Wall 6 Inside air film 0.044 Total 0.518 -136 -185 13032.88 U-value 0
6mm clear glass on Alum 8.23
Interior Glazing Total 8.23 0 U-value 0.121507 Inside air film 0.044 150mm Concrete Sab 0.43 Inside Airfilm 0.044 Floor (ceiling assembly below) Acoustic Board 0.33 Inside air film 0.044 Total 0.892 0 U-value 1.121076 Outside air film 0.12 GI Sheet 0.01 Glass Wool Insulation 1.94 Inside Air Film 0.044 Roof and Ceiling Assembly Acoustic Board 0.33 Inside air film 0.044 Total 2.488 0 U-value 0.401929
Total Heat Gain (W) 16936.23
II. Heat Gain from Windows
Materials DCLF Area QW a. Windows at NE Regular Single pane clear -314.4 -422.2 132739.7 b. Windows at NW Regular Single pane clear -206.4 -287.2 59278.08 c. Windows at NE Regular Single pane clear 492.2833 565.2833 638.2833 Total Heat Gain (W) 192656
III. Heat Gain from Outdoor Infiltration
Materials INF Area QW a. Windows (total area) Regular Single pane clear 24 29 696 b. Doors (total area) Regular Single pane clear 16.5 20.125 332.0625 Total Heat Gain (W) 1028.063 IV. Heat Gain from Occupant No. (#) Sens Heat QW Activities Seated -303 -404.75 122639.3 Total Heat Gain (W) 122639.3 V. Heat Gain from Artificial Lighting no. (#) watt QW 4-18w Troffer Fluorescent Light 198 240 47520 Total Heat Gain (W) 47520 VI. Heat Gain from Appliance and Equipment Appliance/Equipment no. (#) Watt QW Projector 3194 3992 12750448 Computer 988 1234 1219192 Laptop 188 229 43052 Sound System with 4-100W Speaker 388 484 187792 Sound System with 12-100W Speaker 364 452 164528 Total Heat Gain (W) 14365012
TOTAL SENSIBLE HEAT (TOTAL I-VI) 14745792
LATENT HEAT LOAD (30% OF SENSIBLE HEAT) 4423737 TOTAL HEAT LOAD 19169529