You are on page 1of 117

idc group

land development consultants


Building Consent
for
74 Jolson Road
Mt. Wellington
Auckland
< Lot 1,2,3

Lot 4,5,6 >


Drawing Index A Drawing Index A general notes:
Sheet Number Sheet Name Format Sheet Issue Date Revision Sheet Number Sheet Name Format Sheet Issue Date Revision
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
0 Cover A3 12/07/2021 E0-02 Lot 4 Site Plan - Level 1 A3 12/07/2021 and amendments and all T.A requirements.
New Zealand Standards, Compliance
0-000 Drawing Index A3 12/07/2021 E0-03 Lot 4 Plumbing Schematic A3 12/07/2021 documents, NZS3604 2011 and amendments.
0-001 Drawing Index A3 12/07/2021 E0-04 Lot 5 Site Plan - Level 0 A3 12/07/2021 Alternative solutions to comply with The
0-002 Key Notes A3 12/07/2021 E0-05 Lot 5 Site Plan - Level 1 A3 12/07/2021 building code.

0-003 Timber Treatments A3 12/07/2021 E0-06 Lot 5 Plumbing Schematic A3 12/07/2021 2. Architectural drawings to be read as a set
0-004 Timber Treatments A3 12/07/2021 E0-07 Lot 6 Site Plan - Level 0 A3 12/07/2021 and in conjunction with relevant architectural
0-005 Saftey Glazing A3 12/07/2021 E0-08 Lot 6 Site Plan - Level 1 A3 12/07/2021 and structural drawings, calculations,
specifications and all other consent
0-006 Flashings Materials A3 12/07/2021 E0-09 Lot 6 Plumbing Schematic A3 12/07/2021 documentation.
0-007 Flashings Materials A3 12/07/2021 E0-10 Lot 4 Critical Points Calculation A3 12/07/2021
3. The contractor shall verify all dimensions on
A0-00 Site_Existing A3 12/07/2021 E0-11 Lot 5 Critical Points Calculation A3 12/07/2021
site before commencing the work. Use figured
A0-01a Site_Proposed_Level 0 A3 12/07/2021 E0-12 Lot 6 Critical Points Calculation A3 12/07/2021 dimensions in preference to scaled.
A0-01b Site_Proposed_Driveway A3 12/07/2021 E0-14 Lot 4 Slab Plan A3 12/07/2021
4. Construction work to be in accordance with
A0-01c Site_Proposed_Level 1 A3 12/07/2021 E0-15 Lot 5 Slab Plan A3 12/07/2021
New Zealand Building code and standards.
A0-02 Site_Planning Calculation A3 12/07/2021 E0-16 Lot 6 Slab Plan A3 12/07/2021
A0-03 Site_Planning Calculation A3 12/07/2021 E0-17 H1 Calculation & Risk Matrix Lot 4,5,6 A3 12/07/2021 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
A0-04 Site_Management Plan A3 12/07/2021 E1-01 Lot 4 Floor Plan - Level 0 A3 12/07/2021
specifications.
A0-05 Landscaping Plan A3 12/07/2021 E1-02 Lot 4 Floor Plan - Level 1 A3 12/07/2021
B0-01 Lot 1 Site Plan - Level 0 A3 12/07/2021 E1-03 Lot 5 Floor Plan - Level 0 A3 12/07/2021
B0-02 Lot 1 Site Plan - Level 1 A3 12/07/2021 E1-04 Lot 5 Floor Plan - Level 1 A3 12/07/2021 Building Consent
B0-03 Lot 1 Plumbing Schematic A3 12/07/2021 E1-05 Lot 6 Floor Plan - Level 0 A3 12/07/2021
Revision Schedule
B0-04 Lot 1 Critical Points Calculation A3 12/07/2021 E1-06 Lot 6 Floor Plan - Level 1 A3 12/07/2021
No Description Date
B0-05 Lot 1 H1 Calculation & Risk Matrix A3 12/07/2021 E1-07 Lots 4,5,6 Roof Plan A3 12/07/2021
B0-06 Lot 1 Slab Plan A3 12/07/2021 E2-01 Lots 4,5,6 Elevations A3 12/07/2021
B1-01 Lot 1 Floor Plan - Level 0 A3 12/07/2021 E2-02 Lots 4,5,6 Elevations A3 12/07/2021
B1-02 Lot 1 Floor Plan - Level 1 A3 12/07/2021 E2-03 Lots 4,5,6 Elevations A3 12/07/2021
B1-03 Lot 1 Roof Plan A3 12/07/2021 E2-04 Lots 4,5,6 Elevations A3 12/07/2021
B2-01 Lot 1 Elevations A3 12/07/2021 E2-05 Lot 4,5,6 Overall Elevation A3 12/07/2021
B2-02 Lot 1 Elevations A3 12/07/2021 E3-01 Lots 4,5,6 Sections A3 12/07/2021
B3-01 Lot 1 Sections A3 12/07/2021 E3-02 Lots 4,5,6 Sections A3 12/07/2021
C0-01 Lot 2 Site Plan - Level 0 A3 12/07/2021 E3-03 Lots 4,5,6 Sections A3 12/07/2021
C0-02 Lot 2 Site Plan - Level 1 A3 12/07/2021
C0-03 Lot 2 Plumbing Schematic A3 12/07/2021 idc group
C0-04 Lot 2 Critical Points Calculation A3 12/07/2021 land development consultants
C0-05 Lot 2 H1 Calculation & Risk Matrix A3 12/07/2021
C0-06 Lot 2 Slab Plan A3 12/07/2021 Unit 4, building D, 4 Pacific Rise,
C1-01 Lot 2 Floor Plan - Level 0 A3 12/07/2021 Mt Wellington,
Auckland. New Zealand.
C1-02 Lot 2 Floor Plan - Level 1 A3 12/07/2021
p.o. box 91421 Victoria Street West. Auckland
C1-03 Lot 2 Roof Plan A3 12/07/2021
phone: 09 970 1018
C2-01 Lot 2 Elevations A3 12/07/2021 email: info@idcltd.co.nz
C2-02 Lot 2 Elevations A3 12/07/2021
C3-01 Lot 2 Sections A3 12/07/2021 project:
D0-01 Lot 3 Site Plan - Level 0 A3 12/07/2021
74 Jolson Road, Mt Wellington
D0-02 Lot 3 Site Plan - Level 1 A3 12/07/2021
D0-03 Lot 3 Plumbing Schematic A3 12/07/2021
D0-04 Lot 3 Critical Points Calculation A3 12/07/2021 title:

D0-05 Lot 3 H1 Calculation & Risk Matrix A3 12/07/2021 Drawing Index


D0-06 Lot 3 Slab Plan A3 12/07/2021
D1-01 Lot 3 Floor Plan - Level 0 A3 12/07/2021 designed by drawn by checked by
D1-02 Lot 3 Floor Plan - Level 1 A3 12/07/2021 JL FA JL
drawing no. date scale
D1-03 Lot 3 Roof Plan A3 12/07/2021
0-000 12/07/2021 @ A3
D2-01 Lot 3 Elevations A3 12/07/2021
D2-02 Lot 3 Elevations A3 12/07/2021 Job No: 1528
Client: Owner
D3-01 Lot 3 Sections A3 12/07/2021 Contact: 027 872 2235
DP No: Lot 91 DP 45393
E0-01 Lot 4 Site Plan - Level 0 A3 12/07/2021 CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Drawing Index B general notes:
Sheet Number Sheet Name Format Sheet Issue Date Revision
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
F10-01 Construction Details A3 12/07/2021 and amendments and all T.A requirements.
New Zealand Standards, Compliance
F10-02 Construction Details A3 12/07/2021 documents, NZS3604 2011 and amendments.
F10-03 Construction Details A3 12/07/2021 Alternative solutions to comply with The
F10-04 Construction Details A3 22/07/2021 building code.

F10-05 Construction Details A3 12/07/2021 2. Architectural drawings to be read as a set


F10-06 Construction Details A3 12/07/2021 and in conjunction with relevant architectural
F10-07 Construction Details A3 12/07/2021 and structural drawings, calculations,
specifications and all other consent
F10-08 Construction Details A3 12/07/2021 documentation.
F10-09 Construction Details A3 12/07/2021
3. The contractor shall verify all dimensions on
F10-10 Construction Details A3 12/07/2021
site before commencing the work. Use figured
F10-11 Construction Details A3 12/07/2021 dimensions in preference to scaled.
F10-12 Construction Details A3 12/07/2021
4. Construction work to be in accordance with
F10-13 Construction Details A3 12/07/2021
New Zealand Building code and standards.
F10-14 Construction Details A3 12/07/2021
F11-01 Fixing Details A3 12/07/2021 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
F11-02 Fixing Details A3 12/07/2021
specifications.
F12-01 Inter-Floor Stairs Sections A3 12/07/2021
F12-02 Inter-Floor Stairs Sections A3 12/07/2021
F12-03 Inter-Floor Stairs Sections A3 12/07/2021 Building Consent
F12-04 Inter-Floor Stairs Details A3 12/07/2021
Revision Schedule
F13-01 Wet-Area Waterproofing Details A3 12/07/2021
No Description Date
F13-02 Wet-Area Waterproofing Details A3 12/07/2021
F14-01 Fireproofing Details A3 12/07/2021
F14-02 Fireproofing Details A3 12/07/2021
F14-03 Fireproofing Details A3 12/07/2021
F14-04 Fireproofing Details A3 12/07/2021
F14-05 Fireproofing Details A3 12/07/2021
F14-06 Fireproofing Details A3 12/07/2021
F14-07 Fireproofing Details A3 12/07/2021
F14-08 Fireproofing Details A3 12/07/2021
F14-09 Fireproofing Details A3 12/07/2021
F14-10 Fireproofing Details A3 12/07/2021 idc group
F14-11 Fireproofing Details A3 12/07/2021 land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

General Information for Design and Consultants p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


Architectural Design to the zones specified below:
email: info@idcltd.co.nz

Planning Zone - Mixed Housing Suburban Zones


Wind Zone - Medium Wind Zone project:
Earthquake Zone - Zone 1
Exposure Zone - Zone C 74 Jolson Road, Mt Wellington
Roof Truss Design
Roof trusses design and layout by Placemakers title:
Structural Design Drawing Index
Foundation, subfloor structure, retaining walls, mid floor structure, rafters, beams, portals,
posts, bracing design and other SED items by CornerStone Engineering Consultants. Kerry
Pat (09-576 3814 / cornerstone.kerry@gmail.com).
Refer to Engineer's plans, calculations and specifications for detail. designed by drawn by checked by
JL FA JL
Notes for Contractor drawing no. date scale
Site and onsite materials to be secured during demolition and construction. Fencing as 0-001 12/07/2021 @ A3
required to prevent unauthorized access to NZBC F5/AS1 requirements.
Job No: 1528
All levels and dimensions to be checked and verified on site by contractor prior to Client: Owner
Contact: 027 872 2235
commencement of any site or building work. DP No: Lot 91 DP 45393
CT No: NA75B/471
Manufacturer to provide Shop Drawings as required for review prior to fabrication. COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Key Notes - Structure Key Notes - Wall Systems Key Notes - Fire Systems general notes:
S1 Refer to engineer's drawings for concrete foundation design.
Bevel-Back Weatherboard Cladding System (profile, size and finishes to be Type 1 Fire/smoke alarms to be located on main thoroughfares within 3m of doors 1. All work to comply with NZ Building Code,
Refer to Enigneers drawings for mid-floor joist/beam sizes and spacing. 20mm
C1 selected by client) on EX 50x25 H3.2 timber cavity batten on building paper. F1 to bedrooms to NZBC F7/AS1 Domestic smoke alarm system compliance. Final Building Regulations1992, Building Act 2004
Installation to Manufacturer's requirements. E2/AS1 compliance. position of smoke alarms to be confirmed by owner. and amendments and all T.A requirements.
S3 particle board flooring on solid timber joists. Wet area floor joists/nogs spacing
shall be 400mm max New Zealand Standards, Compliance
Selection: to e selectred by owner GIB Intertenancy barrier system (GBTLAB 60b). FRR 60/60/60. Refer to GIB documents, NZS3604 2011 and amendments.
Axon Intertenancy Barrier Systems for Terrace Homes manual for specification. 25mm
S4 Refer to Enigneers drawings for roof rafter sizes and spacing. James Hardie cladding system on proprietary structural cavity batten on underlay Alternative solutions to comply with The
on timber framing. Refer to installation manual for alternative timber batten GIB Barrierline in the middle with 25mm air gap to 90mm framed wall on both building code.
Stria
S5 Pre-nailed timber trusses. Refer to designer's trusses layout plan for details. C4 requirements. Installation to manufacturer's requirement. E2/AS1 compliance. sides. Selected cladding with cavity on underlay on the exterior with approved fire
Linea Profile and finish to be selected by client. stopping to perimeter of intertenancy wall. Penetration in wall to be fire stopped to
2. Architectural drawings to be read as a set
manufacturer's requirements. Selected GIB interior wall lining on the interior.
Wall framing Selection: C4a - Axon, C4b - Stria, C4c - Linea and in conjunction with relevant architectural
Timber framing construction to NZS3604:2011 F4 •For general walls use 10mm GIB Braceline/Noiseline and structural drawings, calculations,
Firth masonry block foundation wall as specified by engineer. Paint or plaster specifications and all other consent
render finish to be selected by client. Selected exterior waterproofing coating •For all other situations refer to G6
Load bearing walls for medium wind zone documentation.
system to all exposed concrete slab/blockwall. Coating to finish 200mm below
Single or top story 16mm GIB Fyreline fixed to Barrierline for entire roof cavity with 200mm min.
C10 underlay/tanking termination edge.
extention beyond ceiling lining.
For stud height up to 2.4m - SG8 90x45 @ 600crs. max. 3. The contractor shall verify all dimensions on
For stud height up to 2.7m - SG8 90x45 @ 600crs. max. Openings in masonry wall to permit stormwater flow and subfloor ventilation. Refer site before commencing the work. Use figured
For stud height up to 3.0m - SG8 90x45 @ 400crs. max. to foundation plan for location. Refer to Engineer's drawings for specifications. 140 framing where required shown in blue fill. dimensions in preference to scaled.
For stud height up to 4.2m - SG8 90x90 @ 300crs. max.
Lower of two stories
90mm timber framing. Selected lining on both sides, Refer to G6 for lining. Exterior fire rated walls within 1m of boundary: James Hardie Linea 4. Construction work to be in accordance with
For stud height up to 2.4m - SG8 90x45 @ 600crs. max.
For stud height up to 2.7m - SG8 90x45 @ 400crs. max. F5 (JHETGL30)on proprietary structural cavity batten on underlay on timber framing. New Zealand Building code and standards.
10mm Gib Fyreline to the interior
For stud height up to 3.0m - SG8 90x45 @ 400crs. max.
or stud height greater than 3.0m - S.E.D Aluminium exterior window & door joineries. Double glazing (R0.26). Powder 5. All proprietary and manufactured items to be
coated finish. See Floor Plans and Window Schedules for locations and sizes. Site installed in accordance with manufacturers
Selected non-combustable soffit lining on soffit battens installed over 16mm Gib
Non load bearing internal walls medium wind zone measure all openings. Windows of less than 1000mm width and sill height less specifications.
S6 than 760mm AFFL, and windows of 1000mm or greater width and sill height less F6 Fyreline on underlay approved fire stopping to perimeter. Penetrations in
For stud height up to 2.7m - SG8 90x45 @ 600crs. max. ceiling/soffit to be fire stopped as per Gib specifications.
For stud height up to 3.3m - SG8 90x45 @ 400crs. max. C13 than 1100mm AFFL require restrictor and saftey glazing. Glazing to comply with
For stud height up to 3.6m - SG8 90x90 @ 400crs. max. NZBC F2/AS1 and NZS4223.3 2016.
For stud height up to 3.9m - SG8 90x90 @ 300crs. max.
Building Consent
Interior door height to be 1980mm unless otherwise specified. Refer floor plans for Key Notes - Miscellaneous
Top Plates: Generally SG8 90x45 top plates plus 140x35 ribbon plates. Type B door leaf width. G1 Selected concrete underlay Installation to manufacture's requirement. Revision Schedule
fixing for trusses to top plates unless specified otherwise by truss designer.
Selection: Moistop 250 No Description Date
Selection of top plates to NZS3604:2011 Table 8.16. Interior door height to be 1980mm unless otherwise specified. Refer floor plans for
door leaf width. Main insulation values to be achieved: walls R2.2, ceiling R3.2, floors concrete
Bottom Plates: Generally M12 bolt fixing for bottom plates to concrete slab to G3 R1.63, floors timber R1.6. Installation to manufacturer's requirements.
NZS3604:2011 Figure 7.21. Selection of bottom plates to NZS3604:2011 Table
8.17. Key Notes - Roof Systems Selected: Pinkbatts/Expol

Lintels: Lintel fixings to NZS3604:2011 Table 8.14. Sill and head trimmers to Asphalt shingle roof cladding on proprietary self-adhesive heavy duty underlay on 4.5mm Hardiflex soffit lining on soffit battens/joists. Paint finished. Refer to Floor
NZS3604:2011 Table 8.15.
G4 Plan for soffit dimensions.
R2 15mm plywood substrate. Profile and colour to be selected by client. Installation by
manufacturer approved installer to manufacturer's requirements.
Selected Gib interior ceiling lining on 70x35 ceiling battens at 400mm crs. max.
Timber Treatment: All timber components timber treatments to NZS3602:2003
Selection: GAF Timberline G5 Where battens can not fix directly to the bottom of rafters/joists use Rondo
suspended ceiling system.
modified as per NZBC B2/AS1. Refer to 0-002 and 0-003 and notes on drawings.
External Gutter & Fascia: Colorsteel gutter and downpipe (generally 80Ø unless
Fixings: stated otherwise). Colour and finishes to be selected by client. H3.2 timber fascia.
•For general walls use 10mm GIB Standard
•All parts of the building shall be securely fastened in accordance with NZS
3604:2011 clause 2.4. Refer to table 2.2 for a guide to fixing types and capacities.
Paint finished. Colour to be selected by client.
•For bracing walls use 10mm GIB Braceline
•For wet area walls use 10mm GIB Aqualine
idc group
•All structural fixings to NZS 3604:2011 Table 4.1 unless otherwise specified by G6 •For acoustic walls use 10mm GIB Noiseline land development consultants
engineer. Key Notes - Access & Safety •For walls require any combination of bracing, wet area, fire and noise use GIB
•All fixings for framing and cladding to NZS 3604:2011 table 4.3 unless otherwise 13mm Superline
specified by engineer. Interfloor Stairs & Handrails: Refer to A12-01 for details. Stair width, landing, tread, Unit 4, building D, 4 Pacific Rise,
riser, pitchline to NZBC D1/AS1. Barrier for stairs to F4/AS1. Handrail (50mm dia.) Mt Wellington,
S7 Timber pole retaining wall. Refer to engineers drawings for retaining wall design. to be 950mm above pitchline. All wall linings and floor coverings in wet areas (such as laundry, kitchen, Auckland. New Zealand.
D1 bathrooms and toilets) shall be H3.2 treated or equivelant to NZS
S8 Masonry retaining wall. Refer to engineers drawings for retaining wall design.
3902:2003:110.3.1. Wet area waterproofing System to all wet area and under tiling.
p.o. box 91421 Victoria Street West. Auckland
Access to front door and stairway shall have a mean coefficient of friction in
accordance with AS/NZS 3661.1 for slip resistance compliance. Membrane to continue up walls 150mm minimum. For timber floors, membrane to
Key Notes - Mechanical & Service G7 be installed on manufacturer approved floor board. Wall areas around shower and
phone: 09 970 1018
email: info@idcltd.co.nz
bath and behind vanities to be waterproofed full height. Membrane applied by
Rinnai Infinity A24 External gas hot water heater located as shown on lower floor Timber framed and lined balustrade 1000mm above finished floor/deck level. Refer manufacturer approved applicator to manufacturers requirements. To E3/AS1
plan and elevations. Unit capacity to be confirmed by manufacturer. No operable D2 to engineer's drawings for specifications. Compliance. project:
M1 window/door opening within 300mm either side of unit and no operable window
opening 1.5m above unit. Final position to be confirmed by contractor. Installation Glass balustrade 1000mm above finished floor/deck level. Side fixed with s.s Selected: AMapleastic Aquadefense on 17mm min. plywood or wet area grade 74 Jolson Road, Mt Wellington
to manufacturers requirements. D3 anchor fixings. Designed and installed by glass supplier. To NZBC F4/AS1. Glass floor board as substrate
selection to NZS:4223: Part 1: 2016.
Two LPG cylinders to be installed next to hot water heater. Cylinders installed on Thermakraft Watergate Plus wall underlay. Installation to manufacturer's title:
top of concrete plinth, restrained to wall with a pair of steel straps with buckle. Selected: Juralco Double Disc Anchor requirements.
Key Notes
Hometech HT150 Ventilation Extraction system installation to manufacturere's Bathroom Glazing: Glazing in bathrooms shall comply with NZBC F2/AS1 and
requirements. Wet areas with an external wall shall have openable window to the NZS4223.3 2016. Refer to 0-004. Flashings (and its hooks/hems) shall be fixed/supported securely in place, with
minimum dimensions to NZBC E2/AS1 Table 7.
M2 outside; wet area with no openable window, and space that contains
designed by drawn by checked by
cooktop/shower/bath shall have mechanical ventilation to NZBC G4/AS1. Extract
Refer to floor plans for location of ceiling access hatch. Flashing material shall be selected/coated according to Exposure Zone as defined JL FA JL
rate to AS1668.2 Table B1. Installation to manufacturer's requirements.
in NZBC E2/AS1 Table 20 & 21 to minimize corrosion. Refer to 0-005 & 0-006. drawing no. date scale

Tile Underfloor Heating (Optional): Warmup undertile heating Installation to 0-002 12/07/2021 1 : 100@ A3
Provide purpose made flashings of compatible material to suit position as
manufacturer's requirements.
recommended by roof/wall cladding manufacturer. All exposed flashing shall be of Job No: 1528
a prefinished material compatible with selected roof/wall cladding. Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
Electrical: Electrical plan to be provided prior to installation. Work to be carried out
by registered electrician. Recessed down lights to compliance with AS/NZS COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
60598.2.2. Insulation around recessed down lights to comply fire requirements. REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Timber Treatments

designed by drawn by checked by


JL FA JL
drawing no. date scale
0-003 12/07/2021 N.T.S@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Timber Treatments

designed by drawn by checked by


JL FA JL
drawing no. date scale
0-004 12/07/2021 N.T.S@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Saftey Glazing

designed by drawn by checked by


JL FA JL
drawing no. date scale
0-005 12/07/2021 @ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Flashings Materials

designed by drawn by checked by


JL FA JL
drawing no. date scale
0-006 12/07/2021 @ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Flashings Materials

designed by drawn by checked by


JL FA JL
drawing no. date scale
0-007 12/07/2021 @ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
70 Alternative solutions to comply with The
building code.
Jo
lso 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
and structural drawings, calculations,
n
specifications and all other consent

74
Ro
documentation.
ad

Jo
3. The contractor shall verify all dimensions on

lso
site before commencing the work. Use figured
dimensions in preference to scaled.

n
Existing trees to

Ro
be removed 4. Construction work to be in accordance with

ad
shown in grey. New Zealand Building code and standards.
5. 5 .1
20
5

5.

5.
5. All proprietary and manufactured items to be

12

5.
22
44°02'10"

5.

5.
installed in accordance with manufacturers

20
Fence line 40.63

5.
5.

20

23

6.
specifications.

82
18

7.
73

17
310°06' Fence line 13.24
Existing garage

5.

7.
Fence line
72

5.

5.
20

18
5.
16
to be removed.

10
Building Consent

10

5.
Jo

5.
G

25
27
5.

ar
lso

5.
14

ag

7.
Revision Schedule

18

6.
e

20
49
n

5.20
No Description Date

7.
Tr
5.

30
Ro

44

ee
5.

5.

Fen
s
20

22
5.

5.
ad

Existing power pole 32

5.

10
27

7.

c
and Existing cabled

e
09
5.

7.
5.

li
11

17
to be removed.

5.

5.

n
30
5.29
5.
5.14

18

e
93
26
5.

5.11
24

6.
28
5.

5.
5.
5.

5.

5.

6.
220°06' 40.23

5.

6.141°02 6.8
25

32
Fence line
26

Eave Level RL=8.25


Floor Level RL=5.89
Existing Dwelling
39

34

19

87
27 Retain

99
Ex Driveway
5. owe
P le
29 r

5.48 5.38 5.

5.
5.3 5.31
po

5.32

5.
29

39

6.76
22
Ex Driveway
0

5.

'
6.46
Ramp

20
5.

5.53 5.42 5.34


idc group

in
5.28
30

5.

4
20

wall 5
5.
5.
5.
220°06' 40.23 Fence line

40
5.
5.

5.

31

6.51
5.

31
land development consultants
41
54

36

32

5.
Deck
310°06' Fence line 10.92

Steps

5.
22

6.03
22
5.36

.3

6
Tr

5.

.8
6
ee

Unit 4, building D, 4 Pacific Rise,


30

3
Existing rock retaining Mt Wellington,
5.
s

25.49
Auckland. New Zealand.
30

6
Existing dwelling wall (500mm max

.6
5.
5.

p.o. box 91421 Victoria Street West. Auckland


to be removed. height) to be removed.

5
28
42

5.
3
5.29 5.27

5.
5.

8
phone: 09 970 1018

F
76

6.
31
45

ence
5.

73
email: info@idcltd.co.nz
5.

30
5.

5.

34

5
Jo

53

.5
56
5.

5.

line
53

37
lso

project:

5.
5.

5.

6.
53
74 Jolson Road, Mt Wellington
54

56
n

5.
5.

5.
5.

5.

82 81
5.
6.35
46

Retaining wall & Fence line


49

40
52

41

60
Ro

6.
220°06' 35.71
ad

5.

5.
5.

5.

6.

6.

title:

6.
66

6.
54
67

68

17

7.
6.
19

6.
13

00

08
30

53
Site_Existing

designed by drawn by checked by


JL FA JL
drawing no. date scale
A0-00 12/07/2021 1 : 200@ A3
Ex SS pipeline 150PE

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
70
general notes:

Jo
lso
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004

n
and amendments and all T.A requirements.

74
Ro
New Zealand Standards, Compliance

ad

Jo
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The

lso
building code.

N
n
Ro
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural

ad
and structural drawings, calculations,
5.
20 5 .1
5 1 2
specifications and all other consent

5.

5.
documentation.

12

5.
22
44°02'10"
3

5.

5.
20
40.63

5.
5.

20

23

6.
82
3. The contractor shall verify all dimensions on

18

7.
73

17
310°06'
site before commencing the work. Use figured

5.

7.
72

5.
dimensions in preference to scaled.

5.
20

18
5.
16

10

10

5.
Jo

5.
4. Construction work to be in accordance with

Pr 050 5.94 in ut

25
27
5.
F

1 = 06 o
lso

New Zealand Building code and standards.

op m

5.
14

detention tank
Stormlite 800L

7.
LL =4. .96

18

6.
SS m d

20
49
IL =3 ic
n

5.20

TV

7.
5. All proprietary and manufactured items to be
IL ubl

5.
M ia

30
Ro

44
installed in accordance with manufacturers
p

H RC
6200

5.

5.
6200 6200

20

22
specifications.

5.
B/

5.
ad

W
13.24

32

5.
1
Ne

10 NewIL 4.Con
27

7.
TV
w Stormlite 850L

N5.1
SWIL 4

09
N
detention tank

7.
e
e
5. I S C

w IL S C
New 225mm dia RCRRJ Co.17

17
w0

5.

5.
Building Consent

1New
3S

I C .3 3 9
SW 4 o
5.29

5.
5.14

L
18
L

93
Class 4 67.2m @ 1% public n

26

4.5 on5.1
SW
5.
New 225mm dia RCRRJ

4.0 on5.32

IL Co
5.11
SS 34

S
24

4.2 n
Class 4 F

6.
2
12.8m @ 1% public

28
5.

5.
5.

5.

Stormlite 800L
5.

Revision Schedule

6.
2
220°06' 40.23

5.

6.141°02 6.8 IL L 4 blic3


25

26
55

39

34

87
detention tank

n
No Description Date

27

99
5900
5.
New BC

29
5.48

5.
5.38

5.
5.3 5.31
5.32 IL 4.65

5.
29

39

6.76
22
New BC

5.

'
6.46
20
5.
5.53 5.42 5.34 IL 4.34

5900
5.28

Pr 50 .06 in ut
30

5.

10 L 6 .52 2 o
op m
4L
20

5.
Stormlite 800L

5.
Stormlite 800L

5.
220°06' 40.23 New 150mm dia upvc

40

SWm d
Ne 4.3 S C
5.
5.

5.

Pr 75m .30

detention tank
5.

31

6.51
5. p C x

NeL 4.2

31
detention tank

IL w S 0

I
Ne 4.4 S
NeL 4.Stormlite 3200L
41

I
54

36
61

6 =5 16
o m
32 es 45

w 0 on

4 .4
I SN16 27.4m @ 1% public

IL w S21
5.

pu 6.8 25
Ne 4.

M ia R
LL =4.

310°06'A/1

5.
w 1 Co
w 08

SW

I2L2

5.

6.03
22
IL

H C
SW
SS

5.36
detention tank

Detention tanks

36
5. C

Ne 54.1 lit n
TV

Co

B/
IL tormntio
30on
sp 0m

S ete

w .308 e 8 tan

Co 5
shown in orange

2
d
it

SW

n .2

6.65
n

.49
6200 6200 6200

Co L
5.
m

W
Stormlite 3200L

F
42

5.
n 5.

W
W

8
00 k 5. idc group

38
detention tank (for 5.29 5.27

5.
76

6.
F
31
45

5.

73
driveway)

5.

30
5.

34

5.
Jo

land development consultants


TV
53

F
56
5.
10.92

57
5.
53

37
lso

TV

5.
5.

5.

6.
53
Unit 4, building D, 4 Pacific Rise,
54

56
n

5.
5.

5.
5.

5.

82 81
5.
Mt Wellington,
6.35

46
49

40
52

41

60
Auckland. New Zealand.
Ro

6.
p.o. box 91421 Victoria Street West. Auckland
220°06' 35.71
ad

5.

5.
5.

5.

6.

6.
6 5 4

6.
66

6.
54
67

68

17

7.
6.
19

6.
13

00

08
phone: 09 970 1018

30

53
email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington
Ex SS pipeline 150PE (Scaled)

title:
Site_Proposed_Level 0

designed by drawn by checked by


JL FA JL
drawing no. date scale
A0-01a 12/07/2021 1 : 200@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.

70
Alternative solutions to comply with The
building code.

N
Jo
2. Architectural drawings to be read as a set

lso
and in conjunction with relevant architectural

n
and structural drawings, calculations,

Ro
specifications and all other consent
documentation.

ad
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

1 5.
4. Construction work to be in accordance with
New Zealand Building code and standards.
20
Ex SW pipeline 375 Concrete

5. All proprietary and manufactured items to be

5.
installed in accordance with manufacturers

18
specifications.

310°06'
72
Building Consent

Jo

Pr 050 5.94 in ut

5.
1 = 06 o
lso

op m

14

detention tank
Stormlite 800L
LL =4. .96

SS m d
Revision Schedule

IL =3 ic
n

5.20

TV
IL ubl
No Description Date

5.
M ia R
Ro

44
p

5.
B/ C
5.

ad
5.

13.24

32
53

1
Ne
61

w
SWIL 4

N e
New 225mm dia RCRRJ Co.17

w
I C
5.

SS
L
Class 4 67.2m @ 1% public n

26
5.

4.0 on5.32
Pr 0505.654 in ut

24
5.

9
5.
1
op m

59

5.

5.

5.
5.
5.

5.
75

5.
LLL 3. .64

220°06' 40.23
71

25

26
55
43

39

34
I 3 ic

SWm d
IL ubl

5.
5.
p

130°06'
M ia R

29
7 o

5.76 5.48
58

5.38

5.3 5.31
5.32
H C

3.66
B/ 5.5

0
5.

5.76

5658

5.
1

5.53 5.42 5.34


56

5.28

30
220°06' 40.23
idc group
1

5.
5.

5.

5.

Pr 75m .30
5.

5. p C x
5.

41

NeL 4.Stormlite 3200L


68

54

36
61

6 =5 16
o m
32 es 45
71

land development consultants

I
LL =4.

310°06'A/1

w 08
5.

Type 2 Cesspit

IL

SS
detention tank
52

5. Co

IL rm tio
with silt trap

30 n
sp 0m

St ete
Unit 4, building D, 4 Pacific Rise,

4.1 lit n
d
it
5.

o
Mt Wellington,
60

8 e 8 tan
Auckland. New Zealand.

n
5.
m

42
p.o. box 91421 Victoria Street West. Auckland

00 k
L
76

phone: 09 970 1018


email: info@idcltd.co.nz

5.
Jo

53
10.92
5.
53
lso

project:

5.
54
n

74 Jolson Road, Mt Wellington


Ro
ad

5.

5.
6

67

68
title:
Site_Proposed_Driveway

designed by drawn by checked by


JL FA JL
drawing no. date scale

Ex SS pipeline 150PE (
A0-01b 12/07/2021 1 : 200@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004

70
and amendments and all T.A requirements.
New Zealand Standards, Compliance

Jo
documents, NZS3604 2011 and amendments.

lso
Alternative solutions to comply with The
building code.

74
Ro
2. Architectural drawings to be read as a set

ad
and in conjunction with relevant architectural

Jo
and structural drawings, calculations,

lso
specifications and all other consent
documentation.

n
Ro
3. The contractor shall verify all dimensions on

ad
site before commencing the work. Use figured
5. 5 .1
20 dimensions in preference to scaled.
5

5.

5.
12

5.
22
44°02'10"

5.

5.
4. Construction work to be in accordance with

20
40.63

5.
5.

20

23

6.
New Zealand Building code and standards.

82
18

7.
73

17
310°06'

5.

7.
72

5.
5. All proprietary and manufactured items to be

5.
20

18
5.
16

10
installed in accordance with manufacturers

10

5.
Jo

specifications.

5.
Pr 050 5.94 in ut

25
27
5.
1 = 06 o
lso

op m

14

7.
LL =4. .96

TV

6.
TV
SS m d

20
49
IL =3 ic
n

5.20

7.
8920 Building Consent
IL ubl

8920 8920
M ia R

30
Ro

5.
B/ C
ad

13.24

32
Revision Schedule
1

7.
No Description Date

09

7.
New 225mm dia RCRRJ

17
5.
5.

18
Class 4 67.2m @ 1% public

26
5.

IL

IL
24

4.2

4.
5.

5.
5.
5.

33 9
5.

Stormlite 800L
5.

5.

6.
2
220°06' 40.23

5.

6.141°02 6.8 IL L 4 blic3


25

32
26
55

39

34

87
detention tank

27

99
5. New BC
5.48 29

5.
5.38
5.3 5.31

5.32 IL 4.65

5.
29

6.76
22
New BC
0

5.

'
6.46
20
5.
5.53 5.42 5.34 5.28 IL 4.34

Pr 50 .06 in ut
30

5.

10 L 6 .52 2 o
op m
4L
20
Stormlite 800L

5.
Stormlite 800L

5.
220°06' 40.23 New 150mm dia upvc

SWm d
Ne 4.3 S C
5.
5.

5.

Pr 75m .30

detention tank
5.

31

6.51
5. p C x

NeL 4.

31
detention tank

IL w S 0

I
Ne 4.4
NeL 4.
41

I
54

36
61

6 =5 16
o m
32 es 45

w 0 on

4 .4
SN16 27.4m @ 1% public
I

IL
5.

pu 6.8 25

M ia R
LL =4.

310°06'A/1

5.
w 1
w 08

SW

I2L2
idc group

22
IL

H C
SW
SS
detention tank

4.2
Co

B/
sp 0m

Co

Co
n

2
it

n
land development consultants

6.65
.49
5.
m

42

8920 8920 Unit 4, building D, 4 Pacific Rise,


8920
76

6.
Mt Wellington,

73
Auckland. New Zealand.
Jo

p.o. box 91421 Victoria Street West. Auckland


5.
10.92

5.
53

37
lso

phone: 09 970 1018


5.

5.

6.
54

email: info@idcltd.co.nz
56
n

5.
5.

5.
5.

5.

82 81
5.
6.35

46
49

40
52

41

60
Ro

6.
220°06' 35.71 project:
ad

5.

5.
5.

5.

6.

6.

6.
66

6.
54
67

68

7.
17

6.
19

6.
74 Jolson Road, Mt Wellington

13

00

08
30

53
title:
Site_Proposed_Level 1
Ex SS pipeline 150PE (Scaled)

designed by drawn by checked by


JL FA JL
drawing no. date scale
A0-01c 12/07/2021 1 : 200@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Lot 1: 163 Lot 2: 141 Alternative solutions to comply with The
Lot 3: 179 building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
Lot 7: 147 Lot 7: 116 Floor Areas and structural drawings, calculations,
Lot 1 specifications and all other consent
Level 0 59 m² documentation.
Level 1 62 m²
3. The contractor shall verify all dimensions on
Total floor area 121 m²
Lot 6: 147 Lot 5: 112 Lot 4: 152 site before commencing the work. Use figured
dimensions in preference to scaled.
Lot 2
Level 0 57 m² 4. Construction work to be in accordance with
Level 1 63 m² New Zealand Building code and standards.
Total floor area 120 m²
5. All proprietary and manufactured items to be
Site_Site Area Lot 3
installed in accordance with manufacturers

1 1 : 400
Level 0
Level 1
63 m²
67 m²
specifications.

Total floor area 130 m² Building Consent

Lot 4 Revision Schedule


Level 0 56 m² No Description Date
Level 1 55 m²
Total floor area 111 m²

Lot 5
Level 0 57 m²
Level 1 54 m²
Total floor area 111 m²

Lot 6
Level 0 58 m²
Level 1 53 m²
Total floor area 111 m² idc group
land development consultants
Lot 1: 66 Lot 2: 68 Legal Description Lot 3
Lot 3: 70 Lot 91 DP 45393 Site Area = 179 m²
Unit 4, building D, 4 Pacific Rise,
Impervious Area = 76 m² (42.5%) Mt Wellington,
Auckland. New Zealand.
Planning Building Coverage = 70 m² (39.1%)
Overall Landscaped Area = 107 m² (59.8%) p.o. box 91421 Victoria Street West. Auckland

Lot 7: 148 Lot 7: 109 Lot 1: 7 Lot 2: 7 Lot 3: 6


Gross Site Area = 1158 m² phone: 09 970 1018
Net Site Area = 1010 m² Lot 4 email: info@idcltd.co.nz
Permeable paving. Lot 6: 6 Lot 5: 6 Lot 4: 10 Impervious Area = 690 m² (59.6%) Site Area = 152 m²
Building Coverage = 385 m² (38.1%) Impervious Area = 70 m² (46%) project:
Landscaped Area = 489 m² (48.4%) Building Coverage = 60 m² (39.5%)
Lot 6: 57 Lot 5: 64 Lot 4: 60 74 Jolson Road, Mt Wellington
Landscaped Area = 86 m² (56.6%)
Lot 1
Site Area = 163 m² Lot 5 title:
Impervious Area = 63 m² (44.8%) Site Area = 112 m²
Building Coverage = 66 m² (38.7%) Net Site Area = 111 m² Site_Planning Calculation

Site_Impervious Area Landscaped Area = 95 m² (58.3%) Impervious Area = 70 m² (62.5%)


Building Coverage = 64 m² (57.6%)
2 1 : 400
Lot 2
Site Area = 141 m²
Landscaped Area = 46 m² (41.4%)
designed by
JL
drawn by
FA
checked by
JL
drawing no. date scale
Impervious Area = 75 m² (53.2%) Lot 6 A0-02 12/07/2021 As indicated@ A3
Building Coverage = 68 m² (48.2%) Gross Site Area = 147 m²
Job No: 1528
Landscaped Area = 73 m² (51.8%) Net Site Area = 131 m² Client: Owner
Impervious Area = 79 m² (53.7%) Contact: 027 872 2235
DP No: Lot 91 DP 45393
Building Coverage = 57 m² (43.5%) CT No: NA75B/471
Landscaped Area = 66 m² (50.4%) COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.
Lot 1: 66 Lot 2: 68
Lot 3: 70 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

Lot 6: 57 Lot 5: 64 Lot 4: 60 4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Site_Building Coverage
3 1 : 400
Building Consent

Revision Schedule
No Description Date

idc group
Lot 1: 95 Lot 2: 73 land development consultants

Lot 3: 107
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
Lot 5: 46
74 Jolson Road, Mt Wellington

title:
Lot 6: 66 Lot 4: 86
Site_Planning Calculation

Site_Landscape Area designed by drawn by checked by

4 1 : 400
JL
drawing no.
FA
date
JL
scale
A0-03 12/07/2021 1 : 400@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
Earthwork Legend Total Earthworks
1. All work to comply with NZ Building Code,
Total cut area: 133.2m² Building Regulations1992, Building Act 2004

70
Cut Fill Total cut volume: 59.9m³ and amendments and all T.A requirements.
New Zealand Standards, Compliance

Jo
Total fill area: 155.9m² documents, NZS3604 2011 and amendments.

lso
Alternative solutions to comply with The
Silt fence Total fill volume: 59.3m³
building code.

74
Ro
2. Architectural drawings to be read as a set

N
Earth stockpile
ad

Jo
and in conjunction with relevant architectural
Fill to create manoeuvring and structural drawings, calculations,

lso
Avg. Fill level from: 5225 Fill to create manoeuvring specifications and all other consent
Avg. Fill level to: 5795 documentation.

n
Construction materials Avg. Fill level from: 5171
Fill area: 9.9m² Cut to create landscaping

Ro
Avg. Fill level to: 5781
Fill volume: 5.6m³ Avg. cut level from: 6560 3. The contractor shall verify all dimensions on
Fill area: 20.1m²

ad
Avg. cut level to: 5950 site before commencing the work. Use figured
Building foundation on ground 5. 5 .1 Fill volume: 12.3m³
20 Cut area: 74.9m² dimensions in preference to scaled.
5

5.

5.
12

5.
Cut volume: 47.9m³

22
44°02'10"

5.

5.
4. Construction work to be in accordance with

20
40.63

5.
5.

20

23

6.
New Zealand Building code and standards.

82
18

7.
Building foundation on piles

73
line of silt fence

17
310°06'

5.

7.
72

5.
5. All proprietary and manufactured items to be

5.
20

18
5.
16

10
installed in accordance with manufacturers

10

5.
Jo

Driveway specifications.

5.
Pr 050 5.94 in ut

25
5950

27
5.
1 = 06 o
lso

op m

14

7.
LL =4. .96

6.
SS m d

20
49
IL =3 ic
n

5.20

7.
Building Consent
IL ubl

M ia R

30
All house foundation on piles,
Ro

no excavation or backfill. 6200 6200 6200

5.
B/ C
ad

13.24

32
Revision Schedule
1

7.
No Description Date

09

7.
N
New 225mm dia RCRRJ 6050 6050

17
N I C

5.
e

N
e
5.

18
Class 4 67.2m @ 1% public

e
w 4.3 on
26

w
SW
5.

IL Co
5.11
L
SS 4

IL S C
S
24

4.2 n

6.
4. on
5.

28
5.

5.

33
5.

5.

6.
2
220°06' 40.23

5.

6.141°02 6.8 IL L 4 blic3


32
25

26
39

34

87
27

99
5.38 5380 5670 New BC

5.
5.32 5840 5812 IL 4.65

39

6.76
'
10000 stabalized

6.46
5.42 5.34 5.28

Pr 50 .06 in ut
10 L 6 .52 2 o
op m
4L
entrance to site

5.
Stormlite 800L

5.
Stormlite 800L

5.
220°06' 40.23 5950

40

SWm d
Ne
5.
5.

5.

Pr 75m .30

detention tank

31

6.51
31
5. p C x

detention tank

Ne 4.4 S

I
NeL 4.Stormlite 3200L
41
54

36

6 =5 16
o m
32 es 45

4 .4
SN16 27.4m @ 1% public
I

IL w S21

pu 6.8 25
6050 6050

NeL 4.

M ia R
LL =4.

310°06'A/1

5.
w 1 Co
w 08

SW

I
idc group

5.

6.03
Fill to create driveway

22
IL

H C
SW
SS

5.36
detention tank

36
Co

B/
Avg. Fill level from: 5250
sp 0m

Co

Co
n

2
it

Avg. Fill level to: 5400

n
land development consultants

6.65
n

.49
Fill area: 16.0m²
5.
m

6200
42

5.
Fill volume: 2.4m³ 6200

38
Unit 4, building D, 4 Pacific Rise,
6200
76

6.
Mt Wellington,

73
Auckland. New Zealand.

All house foundation on piles,


Jo

p.o. box 91421 Victoria Street West. Auckland


10.92
5.

5.
Cut to create landscaping
53

no excavation or backfill.
37
lso

phone: 09 970 1018

5.
Avg. cut level from: 6180
5.

5.

6.
53
54

56

email: info@idcltd.co.nz
n

5.
5.

5.
5.

5.
Avg. cut level to: 5975

82 81
5.
line of silt fence 6.35
46
49

40
52

41

60
Ro

Cut area: 58.3m²

6.
220°06' 35.71 Cut volume: 12m³ project:
ad

5.

5.
5.

5.

6.

6.

6.
66

6.
54
67

68

17

7.
6.
19

6.
74 Jolson Road, Mt Wellington

13

00

08
30

53
Fill to create driveway Fill to create driveway
Avg. Fill level from: 5250 Avg. Fill level from: 5252 Fill to create driveway title:
Avg. Fill level to: 5460 Avg. Fill level to: 5751 Avg. Fill level from: 5547
Avg. Fill level to: 5591 Site_Management Plan
Fill area: 46.5m² Fill area: 35.4m²
Fill volume: 9.8m³ Fill volume: 17.7m³ Fill area: 33.7m²
Ex SS pipeline 150PE (Scaled)

Fill volume: 1.5m³


designed by drawn by checked by
Fill to create manoeuvring Fill to create manoeuvring JL FA JL
Avg. Fill level from: 5651 Avg. Fill level from: 5230 drawing no. date scale
Avg. Fill level to: 5795 Avg. Fill level to: 5781 A0-04 12/07/2021 As indicated@ A3
Fill area: 18m² Fill area: 10m²
Job No: 1528
Fill volume: 2.6m³ Fill volume: 5.5m³ Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,

N
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


1m wide Pedestrain path to have 1m wide Pedestrain crossing to New Zealand Building code and standards.
permeable surface differenciable have permeable surface
from driveway paving. differenciable from driveway paving. 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
specifications.

Screening
around bins Building Consent

Revision Schedule
No Description Date

Landscaping Plan Plant Schedule


1 1 : 200
idc group
Botanincal Name: Common Name: Grade: Spacing: EST. Quantity: land development consultants

Specimen trees:
Unit 4, building D, 4 Pacific Rise,
Landscaping Legend Prunus 'Flex' Flowering Cherry PB95 Where shown 0-2 Mt Wellington,
Auckland. New Zealand.
Gleditsia 'Sunburst' Honey Locust PB95 Where shown 0-2
Lemon Tree PB28 Where shown 0-4 p.o. box 91421 Victoria Street West. Auckland

Motorcourt Specimen Tree Lime Tree PB28 Where shown 0-4 phone: 09 970 1018
Impermeable paving Gleditsia/Prunus Mandarin Tree PB28 Where shown 0-4 email: info@idcltd.co.nz

Motorcourt Fruit Tree Hedge species: project:


Permeable paving Lemon/Lime/Mandarin Pittosporum 'Golf Balls' Low planting to window height PB 12 500mm ?
Griselinia littoralis (Hedge to 1.2m high) PB 12 600mm ? 74 Jolson Road, Mt Wellington
Landscaping Low Plant Eugenia venternatii (Hedge to 2m high) PB 12 1000mm ?
Open jointed pavers or pebbles Pittosporum 'Golf Balls' Trachelospermum 'Star Jasmine' (Hedge to 2m high) PB 12 750mm ? title:

Landscaping Hedging Landscaping Plan


Timber deck Griselinia littoralis (1.2m high)
Planting Notes
designed by drawn by checked by
Lawn Hedging JL FA JL
Low mow grass Eugenia venternatii (1.0 - 1.8m high) All plants and trees to be true to name and species. All substitutions to be approved by Landscape Achitect. drawing no. date scale
All PB 95 grade trees to be minimum in ground height of 1.8m at the time of planting A0-05 12/07/2021 As indicated@ A3
Fencing Retractable Clothes Line All plants and trees to be healthy and free of disease and/or injury at time of planting.
Job No: 1528
Low fence (visually accessible over 1.2m) All plants and trees to be planted to the same depth as growing in container. Client: Owner
Rubbish & Recyling Bins All plants and trees to be watered prior to planting Contact: 027 872 2235
DP No: Lot 91 DP 45393
Fencing All Hedge rows to be finished with a 100mm layer of bark mulch. CT No: NA75B/471

Full high fence (up to 2m) Solar/battery wall-mount light All trees to be double staked and tied. COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
Plant numbers and locations indiucated may vary. Final numbers will need to confirmed on site prior to construction. REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural

N
20m² outdoor living Extent of outlook and structural drawings, calculations,
infringment.
5. 5.1
specifications and all other consent
documentation.
20
5

5.
3. The contractor shall verify all dimensions on

12
site before commencing the work. Use figured
dimensions in preference to scaled.

5.
1m yard set back 4. Construction work to be in accordance with

18
New Zealand Building code and standards.

310°06'
5. All proprietary and manufactured items to be

5.
installed in accordance with manufacturers

20
specifications.
5 4 3 2 1
Site Service Legend
DN
dp DN DP Downpipe Building Consent
5 4 3 2 1
5.
7
8 9
6 CP Cesspit (silttrap) Revision Schedule
14
10
5 No Description Date
vp
4
3
11
CD Channel drain
12
5.20
2 13

TV
Living 1 14
FW Floor waste gully
15
UP 6200
ds
GT Gully trap
5.

Garage

W
TV Terminal vent
13.24

32
1m yard set back

Dining
ds from
VP Vent pipe
above
DS Discharge stack
F

Entry
Stormlite 800L
idc group
5.

detention tank Kitchen Manhole


26
5.

land development consultants


24

Soak hole
dp
5.

IJ Inspection junction Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
32

dp Auckland. New Zealand.

IB Inspection bend p.o. box 91421 Victoria Street West. Auckland


5.

To SW con. gt
Sanitary sewer (1:60min gradient) phone: 09 970 1018
29

5.

email: info@idcltd.co.nz
n.
5. 5.31

co

29

Stormwater (1:100min gradient)


SS
30

project:
To

Drainage Coil 74 Jolson Road, Mt Wellington


5.

5.28
30

Overhead Power Line


title:
Lot 1 Site Plan - Level 0
Pr

Level 0
op

1 designed by
JL
drawn by
FA
checked by
JL
Ce

1 : 100 drawing no. date scale


B0-01 12/07/2021 1 : 100@ A3
ss
pit

Job No: 1528


Client: Owner
Contact: 027 872 2235
A/

DP No: Lot 91 DP 45393


CT No: NA75B/471
1

COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent

N
documentation.
5. 5.1
20 3. The contractor shall verify all dimensions on

5 site before commencing the work. Use figured

5.
dimensions in preference to scaled.

12
4. Construction work to be in accordance with

5.
New Zealand Building code and standards.

18
3m 5. All proprietary and manufactured items to be
310°06' installed in accordance with manufacturers
specifications.

5.
3m

20
Building Consent

vp Revision Schedule
5.
7
8 9 No Description Date
6
14
10
5

TV
4 11
Family
Master 3 12
5.20
2 13
1 14
15
DN 8920
ds/tv
5.

Ens.

W/r
13.24

32

ds to below
Bedroom 1 idc group
Bedroom 2
5.

land development consultants


26
5.
24

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
5.

Auckland. New Zealand.


tv

1m
32
1m

p.o. box 91421 Victoria Street West. Auckland


Shower
1m phone: 09 970 1018
5.

1m email: info@idcltd.co.nz
29

5.
5. 5.31

project:
29
30

74 Jolson Road, Mt Wellington


5.

5.28
30

title:
Lot 1 Site Plan - Level 1
Pr

Level 1 designed by drawn by checked by


op

JL FA JL
2 drawing no. date scale
Ce

1 : 100 B0-02 12/07/2021 1 : 100@ A3


ss

Job No: 1528


Client: Owner
pit

Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471
A/

COPYRIGHT
1

THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF


REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
Sanitary plumbing and drainage system to be designed and installed by Fixture Fixture Unit Discharge Pipe Ø Gradient
licensed plumber drainlayer. To AS/NZS 3500 part 2 requirements. As 1. All work to comply with NZ Building Code,
modified by NZBC:G13/AS3. Basin 1 32/40mm 1:20/1:40 Building Regulations1992, Building Act 2004
Bath 4 40mm 1:40 and amendments and all T.A requirements.
All branch drains to be minimum 100Ø at 1:60min. gradient towards Cleaner's Sink 1 40mm 1:40 New Zealand Standards, Compliance
discharge stack. Additional vent pipe to branch drain exceeding 10m. Bathroom Group 6 80mm 1:60 documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
Dishwasher 3 40mm 1:40 building code.
Where possible connect air admittance valve to main discharge stack Kitchen Sink 3 50mm 1:40
vent at highest possible point. Air admittance valves to be accessable. Laundry(Tub&Washing Machine) 5 40mm 1:40 2. Architectural drawings to be read as a set
Shower 2 40mm 1:40 and in conjunction with relevant architectural
Water Closet Pan 4 80mm 1:60 and structural drawings, calculations,
Floor Waste Gully 0 50mm 1:40 specifications and all other consent
documentation.
S.S. Line 100mm 1:60 min.
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.
Roof clearance as required

Roof clearance as required

Roof clearance as required


Building Consent

Revision Schedule
Roof No Description Date

Level 1 Ceiling
50mmØ vent pipe
50mmØ vent pipe

50mmØ vent pipe


Ens. shower

Level 1 Floor Line


fwg fwg
Level 0 Ceiling
idc group
ij ib
100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient) land development consultants

Unit 4, building D, 4 Pacific Rise,


100mmØ discharge stack pipe

100mmØ discharge stack pipe


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


wc Kitchen laundry
50mmØ vent pipe

email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

fwg fwg Level 0 Floor Line title:


Lot 1 Plumbing Schematic
ij ij Ground Line
100mmØ PVC (1:60min. gradient)
designed by drawn by checked by
JL FA JL
100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient) drawing no. date scale
To SS con.

B0-03 12/07/2021 n.t.s@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


1-W1 (2.5m+45°) and in conjunction with relevant architectural
Eave Level: 11434 and structural drawings, calculations,
specifications and all other consent
Ground Level: 5190

N
documentation.
Distance to boundary: 3809
5. Max. allowable height: 11499
5.1
20 Clearance: 65 1-W 1
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
5

5.
OK dimensions in preference to scaled.

12
4. Construction work to be in accordance with
New Zealand Building code and standards.

5.
18
5. All proprietary and manufactured items to be
installed in accordance with manufacturers

310°06'

3809
specifications.

5.
20
10871 11434 Building Consent

1-S1 Revision Schedule

5.
3242 No Description Date

1-S1 (2.5m+45°)
14

10°
Eave Level: 10871

5.20
Ground Level: 5140
Distance to boundary: 3242
Max. allowable height: 10882
Clearance: 11
5.

OK

10°
13.24

32

45° 10°

idc group
5.

land development consultants


26
5.

10°
24

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


5.

email: info@idcltd.co.nz
29

5.
5. 5.31

project:
29
30

74 Jolson Road, Mt Wellington


5.

5.28
30

title:
Lot 1 Critical Points Calculation
Pr

1_HRIB
designed by drawn by checked by
FA
op

JL JL

3 drawing no.
B0-04
date
12/07/2021
scale
1 : 100@ A3
Ce

1 : 100
ss

Job No: 1528


Client: Owner
pit

Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471
A/

COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
1

REMAIN THE PROPERTY OF IDC GROUP LTD.


general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
Weathertightness Risk Matrix Lot 1 and amendments and all T.A requirements.
New Zealand Standards, Compliance
Elevation 1- East documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
RISK FACTOR LOW MED HIGH V.HIGH SubTotal building code.
Wind Zone (per NZS 3604) 0 0 1 2 0
Number of Stories 0 1 2 4 2 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
Roof/ Wall Intersection Design 0 1 3 5 5 and structural drawings, calculations,
Eaves Width 0 1 2 5 5 specifications and all other consent
Envelope Complexity 0 1 3 6 1 documentation.
Deck Design 0 2 4 6 0
3. The contractor shall verify all dimensions on
total risk score MEDIUM RISK 13 site before commencing the work. Use figured
dimensions in preference to scaled.
Elevation 2- South 4. Construction work to be in accordance with
RISK FACTOR LOW MED HIGH V.HIGH SubTotal New Zealand Building code and standards.
Wind Zone (per NZS 3604) 0 0 1 2 0
5. All proprietary and manufactured items to be
Number of Stories 0 1 2 4 2 installed in accordance with manufacturers
Roof/ Wall Intersection Design 0 1 3 5 5 specifications.
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 1
Deck Design 0 2 4 6 0 Building Consent
total risk score MEDIUM RISK 13
Revision Schedule
No Description Date
Elevation 3- West
RISK FACTOR LOW MED HIGH V.HIGH SubTotal
Wind Zone (per NZS 3604) 0 0 1 2 0
Number of Stories 0 1 2 4 2
Roof/ Wall Intersection Design 0 1 3 5 1
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 0
Deck Design 0 2 4 6 0
total risk score LOW RISK 8

Elevation 4- North idc group


RISK FACTOR LOW MED HIGH V.HIGH SubTotal land development consultants
Wind Zone (per NZS 3604) 0 0 1 2 0
Number of Stories 0 1 2 4 2 Unit 4, building D, 4 Pacific Rise,
Roof/ Wall Intersection Design 0 1 3 5 1 Mt Wellington,
Auckland. New Zealand.
Eaves Width 0 1 2 5 5
p.o. box 91421 Victoria Street West. Auckland
Envelope Complexity 0 1 3 6 1
Deck Design 0 2 4 6 0 phone: 09 970 1018
email: info@idcltd.co.nz
total risk score MEDIUM RISK 9
project:
74 Jolson Road, Mt Wellington

title:
Lot 1 H1 Calculation & Risk
Matrix

designed by drawn by checked by


JL FA JL
drawing no. date scale
B0-05 12/07/2021 1 : 1@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Foundation design by Cornerstone general notes:
Engineering Ltd. Refer to Engineer's plans and
Details. Setout to be by Licensed Surveyor. 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set

N
and in conjunction with relevant architectural
5. 5.1
and structural drawings, calculations,
20 specifications and all other consent
documentation.
5

5.
12
3. The contractor shall verify all dimensions on
3436 site before commencing the work. Use figured

5.
dimensions in preference to scaled.
Setout 9130

18
4. Construction work to be in accordance with
3720 2200 3210

310°06'
New Zealand Building code and standards.

Setout
5269

Setout
5.

4094
5. All proprietary and manufactured items to be

20
400 wide openings in foundation to installed in accordance with manufacturers
400 specifications.
400 allow for floor water flow shown in
400 grey. openings to also be used for
subfloor ventilation. Openings to be

300
Building Consent
600
5.
spaced by mulitples of 400.
14

400
400 Openinings to be located away
Revision Schedule
from steel beams point loads. No Description Date
5.20
Suspended concrete Outline of masonry
system. Refer to Engineer's foundation wall below

5820
drawings for specification. 6200 150
5.

Setout

7620
13.24

32

6200
7020

Refer to Engieer's Rebate at garage door threshold.

1000
drawings for location of
5.

piles and masonry


idc group
26

500

1000 500
foundation wall within
5.

subfloor.
24

land development consultants


400

Setout
1950
5.
Setout

32

400
950

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.
5.

p.o. box 91421 Victoria Street West. Auckland


29

5.
5. 5.31

phone: 09 970 1018


3436 3810 2110 3020 190
29

email: info@idcltd.co.nz
30

Setout
5.

project:

5.28
30

74 Jolson Road, Mt Wellington

title:
Lot 1 Slab Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
B0-06 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
B2-02 Alternative solutions to comply with The
building code.

4 2. Architectural drawings to be read as a set


B2-02 3 1 B2-01 and in conjunction with relevant architectural
2 and structural drawings, calculations,
2 B3-01 specifications and all other consent

N
documentation.

B2-01 3. The contractor shall verify all dimensions on


9130 site before commencing the work. Use figured
dimensions in preference to scaled.
3720 2200 3210
4. Construction work to be in accordance with
90 3630 90 965 90 965 90 3020 190 New Zealand Building code and standards.
D3
5. All proprietary and manufactured items to be
3720 installed in accordance with manufacturers
specifications.
Deck less than 1m
deck 6050
above ground. exempt
from Building Consent.
C13 Building Consent
DN
6050

2000

deck
5 4 3 2 1 DN
90 460 140
Revision Schedule

140

300
5 4 3 2 1
600

No Description Date
7
8 9
6
1/W0-04
1/W0-03
10
G6
31 5
4 11
D3 19 3 12 6200

3170
F10-13
Living
2 13
C4c

TV
F10-09 1 14
15

710 X 1980
11 m² UP Garage
M2
C1

5820
1 18 m² 1

90 1220 90
1020 X 1980

7620
W
B3-01 B3-01
7020

6840

Dining
M1

760 X 1980
7 m² 2700w X 2100h
Entry
idc group
F

1820
garage door
land development consultants
Kitchen 4 m²

500

1000 500
18

90 910 90
9 m²
Unit 4, building D, 4 Pacific Rise,
F10-09 1/W0-01 F6 Mt Wellington,
Auckland. New Zealand.
90

outline of floor above.


p.o. box 91421 Victoria Street West. Auckland
1/W0-02
phone: 09 970 1018
Rangehood , extract
throguh wall. 90 4685 90 355 90 520 90 3020 190 email: info@idcltd.co.nz

90 3630 90 2020 90 3020 190 project:

3810 2110 3210 74 Jolson Road, Mt Wellington

title:
Lot 1 Floor Plan - Level 0
2
B3-01 Lot 1 Window Schedule - Level 0 designed by drawn by checked by
JL FA JL
Mark Width Height Sill Height Head Height drawing no. date scale
B1-01 12/07/2021 1 : 100@ A3

Job No: 1528


1/W0-01 1600 2100 0 2100 Client: Owner
Contact: 027 872 2235
1/W0-02 1800 500 1100 1600 DP No: Lot 91 DP 45393
CT No: NA75B/471
1/W0-03 2800 2100 0 2100
COPYRIGHT
1/W0-04 1500 2100 0 2100 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


B2-02 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
4 documents, NZS3604 2011 and amendments.
B2-02 3 1 B2-01 Alternative solutions to comply with The
building code.
2

N
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
B2-01 2 and structural drawings, calculations,
specifications and all other consent
B3-01
documentation.

3. The contractor shall verify all dimensions on


9130 site before commencing the work. Use figured
dimensions in preference to scaled.
5920 3210
4. Construction work to be in accordance with
90 3630 90 965 90 915 140 3020 190 New Zealand Building code and standards.

Outline of floor below. 5. All proprietary and manufactured items to be


installed in accordance with manufacturers
Extent of racking 22 D1 26 specifications.
shown in red. 1800 F10-10

90 160140
F10-11
1/W1-01 1/W1-02
min. headroom

90

300
1/W1-03
6
7
8 9 Building Consent
10

2010
5

TV
1/W1-09
4
C13 Master 3
11
12
Family Revision Schedule
No Description Date

3130
2 13
12 m² 1 14 9 m²
90 920 90 1220 90 920 90

1220 X 1980
760 X 1980
15
8920
M2
1 1

90 520 90
760 X 1980 710 X 1980

C4c
1/W1-08
W/r

7620
7030
Ens.
B3-01 1220 X 1980 B3-01

3 m²
1220 X 1980
2 m²

760 X 1980
760 X 1980
710 X 1980
Bedroom 1 23

3020
Bedroom 2
1/W1-07

Shower F10-10

1620 X 1980
9 m²
10 m²
2010

3 m² idc group

C4b

90 200 90
land development consultants

290
90

1/W1-05 1/W1-04
1/W1-06
C4a 21 C4b Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
20 28 Auckland. New Zealand.
F10-09
F10-09 F10-12 p.o. box 91421 Victoria Street West. Auckland

90 2620 90 1975 90 965 90 1475 90 1455 190 phone: 09 970 1018


email: info@idcltd.co.nz

90 3020 90 520 90 2020 90 3020 190


project:
3810 5320
74 Jolson Road, Mt Wellington
Lot 1 Window Schedule - Level 1
2
Mark Width Height Sill Height Head Height title:
B3-01
Lot 1 Floor Plan - Level 1
1/W1-01 2000 1000 1000 2000
1/W1-02 1000 2000 0 2000 designed by drawn by checked by
JL FA JL
1/W1-03 1800 1000 1000 2000
drawing no. date scale
1/W1-04 1800 1800 400 2200 B1-02 12/07/2021 1 : 100@ A3
1/W1-05 600 1800 400 2200
Job No: 1528
1/W1-06 1800 1000 1000 2000 Client: Owner
Contact: 027 872 2235
1/W1-07 1600 400 1400 1800 DP No: Lot 91 DP 45393
CT No: NA75B/471
1/W1-08 1000 400 1400 1800
COPYRIGHT
1/W1-09 1600 400 1400 1800 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for roof notes. general notes:
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,

N
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.
2
B3-01 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
specifications.

50
80Ø dp
Building Consent

50

50
Revision Schedule
No Description Date

10°
S4 S5

1 1

10°
45°
B3-01 10° B3-01

50 idc group
R2 land development consultants
10°

80Ø dp

50
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
50

Auckland. New Zealand.


150
50 50 p.o. box 91421 Victoria Street West. Auckland

80Ø dp phone: 09 970 1018


email: info@idcltd.co.nz

project:
2
B3-01
74 Jolson Road, Mt Wellington

title:
Lot 1 Roof Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
B1-03 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:
1
B3-01 1. All work to comply with NZ Building Code,
7 Building Regulations1992, Building Act 2004
F10-03 R2 and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
1-W1 Alternative solutions to comply with The
building code.
Level R

65
2. Architectural drawings to be read as a set
11365 and in conjunction with relevant architectural
and structural drawings, calculations,
C4b specifications and all other consent
Extent of F5 shown documentation.
with orange hatch
Level 1 3. The contractor shall verify all dimensions on
C4a
site before commencing the work. Use figured
8920 dimensions in preference to scaled.
C1 C4c
4. Construction work to be in accordance with
New Zealand Building code and standards.

Level 0 5. All proprietary and manufactured items to be


installed in accordance with manufacturers
6200 C10 specifications.

5190 Building Consent


Opening in foundation to
allow for flood water flow. Revision Schedule
No Description Date

1 Lot 1 Elevation - North


B1-01 1 : 100 2
B3-01

R2
3 10
C4b
Level R
F10-02 F10-05
idc group
11365 land development consultants
11

1-S1 Non-structural window


1/W1-06 13 shroud to be designed and Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
C4a F14-11 1/W1-04 installed by others. Auckland. New Zealand.
27
Level 1 1/W1-05 p.o. box 91421 Victoria Street West. Auckland
F10-12
8920 phone: 09 970 1018

C1 email: info@idcltd.co.nz
C13
1/W0-02
Opening in foundation to project:
allow for flood water flow. 74 Jolson Road, Mt Wellington
Level 0 1/W0-01
6200
title:
Lot 1 Elevations
5140
C10 designed by drawn by checked by
JL FA JL
drawing no. date scale
B2-01 12/07/2021 1 : 100@ A3

2 Lot 1 Elevation - East Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
B1-01 1 : 100 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:
1
1. All work to comply with NZ Building Code,
B3-01 Building Regulations1992, Building Act 2004
9 C4b
and amendments and all T.A requirements.
1-W1 F10-05 New Zealand Standards, Compliance
R2 documents, NZS3604 2011 and amendments.
Level R Alternative solutions to comply with The

65
building code.
11365
C13 2. Architectural drawings to be read as a set
1/W1-09 1/W1-08 1/W1-07 and in conjunction with relevant architectural
and structural drawings, calculations,
C4a specifications and all other consent
Level 1 documentation.
8920
3. The contractor shall verify all dimensions on
C1 site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


D3 New Zealand Building code and standards.
Level 0 C10
6200 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
specifications.
5190 Opening in foundation to
allow for flood water flow.
Building Consent

Revision Schedule

Lot 1 Elevation - South


No Description Date

3
B1-01 1 : 100
2
B3-01

R2
25
Level R F10-11 idc group
11365

11
land development consultants
1-S1
1/W1-03 1/W1-01 C13
11 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
Level 1 1/W1-02 F10-06
p.o. box 91421 Victoria Street West. Auckland
8920
phone: 09 970 1018
1/W0-04 1/W0-03 C1 email: info@idcltd.co.nz

D3 project:

Level 0 74 Jolson Road, Mt Wellington


6200 C10
title:

5140 Lot 1 Elevations


Opening in foundation to
allow for flood water flow.
designed by drawn by checked by
JL FA JL

4 Lot 1 Elevation - West drawing no.


B2-02
date
12/07/2021
scale
1 : 100@ A3

B1-01 1 : 100 Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
2
Refer to Key Notes for Section notes. general notes:

B3-01 1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
11 R2 New Zealand Standards, Compliance
4 F14-09
documents, NZS3604 2011 and amendments.
F10-02 Alternative solutions to comply with The
S4 building code.
Level R S5
2. Architectural drawings to be read as a set
11365 and in conjunction with relevant architectural
C13 S6 and structural drawings, calculations,
specifications and all other consent

1883
Ens. W/r Family documentation.
G7 S3
Level 1 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
8920 C4c dimensions in preference to scaled.
G5 24 12
Dining Garage 4. Construction work to be in accordance with

2400
F10-10 F14-10
Not included termal New Zealand Building code and standards.
G3 envalope. Insulation to all
Level 0 walls and ceilings. 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
6200 specifications.
S2 C10
11
F14-09 Building Consent
S1
Revision Schedule

Lot 1 Section 1
No Description Date

1
B1-01 1 : 100

1
5
B3-01
F10-02

R2 1 idc group
F10-01
S5 land development consultants
Level R
11365 S6 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
C4b Auckland. New Zealand.
Master W/r Shower
G3 p.o. box 91421 Victoria Street West. Auckland

G7 phone: 09 970 1018


Level 1 D3 email: info@idcltd.co.nz

8920
F6 project:
C1
Living Dining Entry 29 74 Jolson Road, Mt Wellington
2400

F10-13 C13
S1
Level 0 title:

6200 Lot 1 Sections


2 30 C10
F10-01 F10-13 designed by drawn by checked by
JL FA JL
drawing no. date scale
1 B3-01 12/07/2021 1 : 100@ A3
F12-01

2 Lot 1 Section 2 Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
B1-01 1 : 100 CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
4
Jo
general notes:

lso
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance

n
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The

Ro
building code.

2. Architectural drawings to be read as a set

ad
and in conjunction with relevant architectural

N
and structural drawings, calculations,
specifications and all other consent
documentation.
20m² outdoor living

5.

5.
12

5.
3. The contractor shall verify all dimensions on

22
44°02'10"

5.
site before commencing the work. Use figured

20
40.63 dimensions in preference to scaled.

20
5610 4. Construction work to be in accordance with
1m yard set back New Zealand Building code and standards.

3864

3477
5. All proprietary and manufactured items to be

5.
Site Service Legend installed in accordance with manufacturers

5.
10
specifications.

10
DP Downpipe
ds DN
5 4 3 2 1
dp Building Consent
CP Cesspit (silttrap)
dp F 7
8 9

Kitchen
6
10
CD Channel drain Revision Schedule
5 No Description Date
Dining 4 11

gt 3 12 Garage FW Floor waste gully


2 13
1 14
15 GT Gully trap
UP
TV Terminal vent
6200

W
Living VP Vent pipe
Stormlite 850L
TV

Entry ds from above detention tank DS Discharge stack

N
N IL C

5.
e
dp

w
Manhole

18
w 4 on
idc group

SW
IL Co
5.1
SS.314
Soak hole
4

land development consultants


.22 n

IJ Inspection junction
Stormlite 800L Stormlite 800L Unit 4, building D, 4 Pacific Rise,
detention tank
detention tank IB Inspection bend Mt Wellington,
Auckland. New Zealand.

Sanitary sewer (1:60min gradient) p.o. box 91421 Victoria Street West. Auckland
n.
co

phone: 09 970 1018


Stormwater (1:100min gradient)
SS

5.
email: info@idcltd.co.nz
To SW con.
To

22
5.

Drainage Coil
project:
20

Overhead Power Line 74 Jolson Road, Mt Wellington

Stormlite 800L title:


5.
5.

New 150mm dia upvc


Ne

31

Lot 2 Site Plan - Level 0


31
Ne

2_Level 0
w
w

1
SW n
SS

designed by drawn by checked by


1 : 100 JL FA JL
Co

drawing no. date scale


Co

C0-01 12/07/2021 1 : 100@ A3


n

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
4
Jo
general notes:

lso
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance

n
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The

Ro
building code.

2. Architectural drawings to be read as a set

ad
and in conjunction with relevant architectural
and structural drawings, calculations,

N
90 3020 90 1220 90 5130 90 specifications and all other consent
documentation.

5.

5.
12

5.
3. The contractor shall verify all dimensions on

22
44°02'10"

5.
site before commencing the work. Use figured

20
40.63 dimensions in preference to scaled.

20
4. Construction work to be in accordance with
3m New Zealand Building code and standards.

5.
5. All proprietary and manufactured items to be

5.
3m
installed in accordance with manufacturers

5.
16

10
specifications.

10
ds/tv Building Consent
90
90

90
7
8 9
6 Revision Schedule
Ens. 10
No Description Date
2700

5
4
Master 11
Family

3010
3710

3 12
2 13
1 14
15
DN
90 920 90

8920

9052090
90

W/r ds to below Stormlite 850L


1710

Bedroom 2
Bedroom 1
detention tank
3020

5.

3020
90 1220 90

18
W/r Shower
Ltv
4
I
idc group
90

land development consultants


.22

90
1m

Stormlite 800L

1m
Unit 4, building D, 4 Pacific Rise,

1m detention tank Mt Wellington,


Auckland. New Zealand.
1m
p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


90 965 90 1475 90 1455 90

5.
email: info@idcltd.co.nz

22
90 1420 90 3020 900 4930 90
5.

project:
20

74 Jolson Road, Mt Wellington

Stormlite 800L title:


5.
5.

New 150mm dia upvc


Ne

31

Lot 2 Site Plan - Level 1


31
Ne

2_Level 1
w
w

2
SW n
SS

designed by drawn by checked by


1 : 100 JL FA JL
Co

drawing no. date scale


Co

C0-02 12/07/2021 1 : 100@ A3


n

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
Sanitary plumbing and drainage system to be designed and installed by Fixture Fixture Unit Discharge Pipe Ø Gradient
licensed plumber drainlayer. To AS/NZS 3500 part 2 requirements. As 1. All work to comply with NZ Building Code,
modified by NZBC:G13/AS3. Basin 1 32/40mm 1:20/1:40 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Bath 4 40mm 1:40
New Zealand Standards, Compliance
All branch drains to be minimum 100Ø at 1:60min. gradient towards Cleaner's Sink 1 40mm 1:40 documents, NZS3604 2011 and amendments.
discharge stack. Additional vent pipe to branch drain exceeding 10m. Bathroom Group 6 80mm 1:60 Alternative solutions to comply with The
Dishwasher 3 40mm 1:40 building code.
Where possible connect air admittance valve to main discharge stack Kitchen Sink 3 50mm 1:40
vent at highest possible point. Air admittance valves to be accessable. Laundry(Tub&Washing Machine) 5 40mm 1:40 2. Architectural drawings to be read as a set
Shower 2 40mm 1:40 and in conjunction with relevant architectural
and structural drawings, calculations,
Water Closet Pan 4 80mm 1:60 specifications and all other consent
Floor Waste Gully 0 50mm 1:40 documentation.
S.S. Line 100mm 1:60 min.
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.
Roof clearance as required

Roof clearance as required


Building Consent

Revision Schedule
Roof No Description Date

Level 1 Ceiling
50mmØ vent pipe

50mmØ vent pipe


Ens. shower

fwg fwg Level 1 Floor Line


idc group
ij ib Level 0 Ceiling
land development consultants
100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient)

Unit 4, building D, 4 Pacific Rise,


100mmØ discharge stack pipe

100mmØ discharge stack pipe


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


wc Kitchen laundry email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
fwg fwg Level 0 Floor Line
Lot 2 Plumbing Schematic
ij ij Ground Line
100mmØ PVC (1:60min. gradient)
designed by drawn by checked by
JL FA JL
100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient) drawing no. date scale
To SS con.

C0-03 12/07/2021 n.t.s@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
74
Jo
general notes:

1. All work to comply with NZ Building Code,

lso
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance

n
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The

Ro
building code.
2-W1 (2.5m+45°)
2. Architectural drawings to be read as a set
Eave Level: 10994 and in conjunction with relevant architectural

ad
Ground Level: 5210 and structural drawings, calculations,
Distance to boundary: 3324 2-W1 (2.5m+45°) specifications and all other consent
Max. allowable height: 11034 Eave Level: 10915 documentation.
Ground Level: 5200

5.
Clearance: 40

5.
2-W 1 Distance to boundary: 3265 3. The contractor shall verify all dimensions on

12
OK

5.
22
site before commencing the work. Use figured
44°02'10" 2-W 2 Max. allowable height: 10965

5.
20
dimensions in preference to scaled.
40.63 Clearance: 50

20
OK 4. Construction work to be in accordance with
New Zealand Building code and standards.

3324
5. All proprietary and manufactured items to be

5.

5.
installed in accordance with manufacturers

3268
5.
16
specifications.

10
10994

10
10915

Building Consent

45°

45°
Revision Schedule
No Description Date

10° 10°

10°
Stormlite 850L
detention tank

5.
18
idc group
10°

land development consultants

Stormlite 800L Unit 4, building D, 4 Pacific Rise,

detention tank Mt Wellington,


Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018

5.
email: info@idcltd.co.nz

22
5.

project:
20

74 Jolson Road, Mt Wellington

title:
Stormlite 800L
5.
5.

New 150mm dia upvc


Ne

Lot 2 Critical Points Calculation


31
31
Ne

w
w

2_Level R
SW n

designed by drawn by checked by


SS

3 1 : 100
JL
drawing no.
FA
date
JL
scale
Co
Co

C0-04 12/07/2021 1 : 100@ A3


n

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Weathertightness Risk Matrix Lot 2 New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
Elevation 1- East building code.

RISK FACTOR LOW MED HIGH V.HIGH SubTotal 2. Architectural drawings to be read as a set
Wind Zone (per NZS 3604) 0 0 1 2 0 and in conjunction with relevant architectural
Number of Stories 0 1 2 4 2 and structural drawings, calculations,
Roof/ Wall Intersection Design 0 1 3 5 3 specifications and all other consent
documentation.
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 1 3. The contractor shall verify all dimensions on
Deck Design 0 2 4 6 0 site before commencing the work. Use figured
dimensions in preference to scaled.
total risk score MEDIUM RISK 11
4. Construction work to be in accordance with
Elevation 2- South New Zealand Building code and standards.

RISK FACTOR LOW MED HIGH V.HIGH SubTotal 5. All proprietary and manufactured items to be
Wind Zone (per NZS 3604) 0 0 1 2 0 installed in accordance with manufacturers
Number of Stories 0 1 2 4 2 specifications.
Roof/ Wall Intersection Design 0 1 3 5 5
Eaves Width 0 1 2 5 5 Building Consent
Envelope Complexity 0 1 3 6 1
Deck Design 0 2 4 6 0
Revision Schedule
total risk score MEDIUM RISK 13 No Description Date

Elevation 3- West
RISK FACTOR LOW MED HIGH V.HIGH SubTotal
Wind Zone (per NZS 3604) 0 0 1 2 0
Number of Stories 0 1 2 4 2
Roof/ Wall Intersection Design 0 1 3 5 1
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 0
Deck Design 0 2 4 6 0
total risk score MEDIUM RISK 8
idc group
Elevation 4- North land development consultants

RISK FACTOR LOW MED HIGH V.HIGH SubTotal


Unit 4, building D, 4 Pacific Rise,
Wind Zone (per NZS 3604) 0 0 1 2 0 Mt Wellington,
Number of Stories 0 1 2 4 2 Auckland. New Zealand.

Roof/ Wall Intersection Design 0 1 3 5 1 p.o. box 91421 Victoria Street West. Auckland

Eaves Width 0 1 2 5 5 phone: 09 970 1018


Envelope Complexity 0 1 3 6 1 email: info@idcltd.co.nz
Deck Design 0 2 4 6 0
total risk score MEDIUM RISK 9 project:
74 Jolson Road, Mt Wellington

title:
Lot 2 H1 Calculation & Risk
Matrix

designed by drawn by checked by


JL FA JL
drawing no. date scale
C0-05 12/07/2021 1 : 1@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
ol
so
Foundation design by Cornerstone general notes:
Engineering Ltd. Refer to Engineer's plans and
1. All work to comply with NZ Building Code,

n
Details. Setout to be by Licensed Surveyor.
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.

Ro
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The

ad
building code.

N
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural

5.
and structural drawings, calculations,

5.
12

5.
specifications and all other consent

22
44°02'10"

5.
documentation.

20
40.63

20
3. The contractor shall verify all dimensions on
9730 site before commencing the work. Use figured
dimensions in preference to scaled.

Setout
1050 4510 2020 3200 1050

3914

5.
4. Construction work to be in accordance with

5.

Setout
3399
New Zealand Building code and standards.

5.
16
Setout Setout

10
400 400

10
5. All proprietary and manufactured items to be
400
installed in accordance with manufacturers
specifications.

300
400

400
400 wide openings in foundation to
allow for floor water flow shown in 400 Building Consent
Suspended concrete
grey. openings to also be used for system. Refer to Engineer's
subfloor ventilation. Openings to be drawings for specification. Revision Schedule
spaced by mulitples of 400. No Description Date

Openinings to be located away 6200


6000

Outline of masonry

5700

6500
from steel beams point loads. foundation wall below

Rebate at garage door threshold.


Refer to Engieer's drawings
for location of piles and

5.
masonry foundation wall
400

18400
within subfloor.

500
Setout

5.11
916

idc group

Setout
400

1950
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.
1050 6505 140 3085 140 1050

5.
p.o. box 91421 Victoria Street West. Auckland

22
Setout
5.

phone: 09 970 1018


20

email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington
5.
5.

31
31

title:
Lot 2 Slab Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
C0-06 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.
C2-02
2. Architectural drawings to be read as a set
2
and in conjunction with relevant architectural
4 C3-01 and structural drawings, calculations,
C2-02 3 1 specifications and all other consent
C2-01
documentation.
2

N
9730 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
C2-01 4510 5220 dimensions in preference to scaled.

Decks less than 1m 90 4330 90 965 90 965 90 3020 90 4. Construction work to be in accordance with
above ground. exempt New Zealand Building code and standards.
from Building Consent. 4510
5. All proprietary and manufactured items to be
Deck installed in accordance with manufacturers
D3 specifications.

6050
Rangehood , extract C13 Building Consent

Deck
2000
throguh wall. 6050
DN

140 210 90
90 5 4 3 2 1
DN Revision Schedule

300
5 4 3 2 1
No Description Date
F 2/W0-03
7
8 9 2/W0-04
6 G6
Kitchen 5
10

Dining 4 11
7 m²

2870
5 m²
3 12 C1
2 13

1020 X 1980 710 X 1980


1 14
15
Garage
UP M2
5820

1 17 m² 1

5700

6500
90 1200 90 1220 90
C3-01 C3-01

W
6200
Living
2700w X 2100h
TV

760 X 1980
16 m²
Entry
garage door idc group
2/W0-02 2 m² M1 land development consultants
1150 90

500
2/W0-01
Deck

6050
DN Unit 4, building D, 4 Pacific Rise,
5 4 3 2 1
Mt Wellington,
Auckland. New Zealand.
outline of floor above.
3660 p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


Deck email: info@idcltd.co.nz
90 5385 90 355 90 520 90 3020 90

6505 140 2945 140 project:


74 Jolson Road, Mt Wellington

2 title:
C3-01
Lot 2 Floor Plan - Level 0

Lot 2 Window Schedule - Level 0 designed by drawn by checked by


JL FA JL
drawing no. date scale
Mark Width Height Sill Height Head Height
C1-01 12/07/2021 1 : 100@ A3

Job No: 1528


2/W0-01 1600 2100 0 2100 Client: Owner
Contact: 027 872 2235
2/W0-02 2800 2100 0 2100 DP No: Lot 91 DP 45393
CT No: NA75B/471
2/W0-03 1800 2100 0 2100
COPYRIGHT
2/W0-04 1500 2100 0 2100 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.
C2-02
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
4 and structural drawings, calculations,
3 specifications and all other consent
C2-02 1 C2-01
documentation.
2

N
2 3. The contractor shall verify all dimensions on
C3-01 site before commencing the work. Use figured
C2-01 dimensions in preference to scaled.

4. Construction work to be in accordance with


9730 New Zealand Building code and standards.

4510 5220 5. All proprietary and manufactured items to be


installed in accordance with manufacturers
90 3020 90 1220 90 965 90 965 3110 90 specifications.
Extent of racking
shown in red. 1900
D1 Building Consent
min. headroom

2/W1-01 2/W1-02 Revision Schedule


D3
90

300
2/W1-03 2/W1-04 No Description Date

140
710 X 1980

90
7
8 9
6
10
2700

5
4
Master 11
Family

3010
3 12
Ens.

3360
2 13
12 m² 1 14 9 m²

760 X 1980
3 m² 15
C1

760 X 1980
90 920 90

1 8920 1

90 520 90
7000

C3-01 C3-01

7210
6910
710 X 1980 1220 X 1980

90 1130 90
1220 X 1980

760 X 1980
760 X 1980
1710

W/r Bedroom 2
2 m² 10 m² 710 X 1980 Bedroom 1
idc group

3020
Shower
90 1220 90

land development consultants


9 m²

2010
W/r
710 X 1980

4 m²
2 m²
C4b Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
210

90

90
Auckland. New Zealand.
2/W1-07
2/W1-06 2/W1-05 p.o. box 91421 Victoria Street West. Auckland
C4a
C13 phone: 09 970 1018
90 1420 90 3875 90 965 90 1475 90 1455 90 email: info@idcltd.co.nz

90 1420 90 3020 90 1820 90 3020 90


project:
4620 5110 74 Jolson Road, Mt Wellington

title:
Lot 2 Window Schedule - Level 1
2 Lot 2 Floor Plan - Level 1
Mark Width Height Sill Height Head Height
C3-01
designed by drawn by checked by
2/W1-01 2000 1000 1000 2000 JL FA JL
drawing no. date scale
2/W1-02 800 1000 1000 2000
C1-02 12/07/2021 1 : 100@ A3
2/W1-03 1000 2000 0 2000
2/W1-04 1800 1000 1000 2000 Job No: 1528
Client: Owner
2/W1-05 1800 1800 400 2200 Contact: 027 872 2235
DP No: Lot 91 DP 45393
2/W1-06 600 1800 400 2200 CT No: NA75B/471

2/W1-07 1800 1000 1000 2000 COPYRIGHT


THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for roof notes. general notes:
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
C2-02 documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.
4
C2-02 3 1 C2-01 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
2

N
2 and structural drawings, calculations,
specifications and all other consent
C3-01 documentation.
C2-01
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
50 specifications.
80Ø dp 50
80Ø dp
Building Consent

50

45°

50
45°
10°
Revision Schedule
No Description Date
S4

1 1
C3-01 C3-01
10°

10°
S5
12
F10-07

80Ø dp
10°

R2
idc group
land development consultants
50

50
50 50 50
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington
2
C3-01 title:
Lot 2 Roof Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
C1-03 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:
1
1. All work to comply with NZ Building Code,
C3-01 R2 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
Level R building code.
11365

50
2. Architectural drawings to be read as a set
2-W2 and in conjunction with relevant architectural
C4b and structural drawings, calculations,
specifications and all other consent
documentation.
Level 1
8920 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
C1 dimensions in preference to scaled.

4. Construction work to be in accordance with


M1 New Zealand Building code and standards.
Level 0
5. All proprietary and manufactured items to be
6200 C10 installed in accordance with manufacturers
specifications.

Opening in foundation to 5200


allow for flood water flow. Building Consent

Revision Schedule

1 Lot 2 Elevation - North No Description Date

C1-01 1 : 100

2
C3-01

R2
idc group
Level R
land development consultants
11365
C4b
Unit 4, building D, 4 Pacific Rise,
2/W1-07 Mt Wellington,
Auckland. New Zealand.

C4a
8
2/W1-05 C13
p.o. box 91421 Victoria Street West. Auckland
Level 1 F10-04
2/W1-06
phone: 09 970 1018
8920 email: info@idcltd.co.nz
Non-structural window
shroud to be designed and
project:
C1 installed by others.
74 Jolson Road, Mt Wellington
Level 0 2/W0-02 2/W0-01
6200 title:
Lot 2 Elevations

Opening in foundation to
designed by drawn by checked by
allow for flood water flow. C10
JL FA JL
drawing no. date scale

2 Lot 2 Elevation - East C2-01

Job No: 1528


12/07/2021 1 : 100@ A3

Client: Owner
C1-01 1 : 100 Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:
1
R2 1. All work to comply with NZ Building Code,
C3-01
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
C4b documents, NZS3604 2011 and amendments.
Level R Alternative solutions to comply with The
building code.
11365

40
2-W1 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
and structural drawings, calculations,
C4a specifications and all other consent
Level 1 documentation.
8920
3. The contractor shall verify all dimensions on
C1 site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


Level 0 D3 C10 New Zealand Building code and standards.

6200 5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.
5210 Opening in foundation to
allow for flood water flow.
Building Consent

Revision Schedule
No Description Date

3 Lot 2 Elevation - South


C1-01 1 : 100
2
C3-01

R2

Level R
idc group
11365
land development consultants

2/W1-04 2/W1-02 2/W1-01 C13


Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
Level 1 2/W1-03
p.o. box 91421 Victoria Street West. Auckland
8920
phone: 09 970 1018
2/W0-04 2/W0-03 C1 email: info@idcltd.co.nz

D3 project:
Level 0 74 Jolson Road, Mt Wellington
6200
C10
title:
Lot 2 Elevations
Opening in foundation to
allow for flood water flow.
designed by drawn by checked by
JL FA JL
drawing no. date scale
C2-02 12/07/2021 1 : 100@ A3

4 Lot 2 Elevation - West Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
C1-01 1 : 100
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Section notes. general notes:

1. All work to comply with NZ Building Code,


2 Building Regulations1992, Building Act 2004
C3-01 and amendments and all T.A requirements.
6 New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
F10-03 R2 Alternative solutions to comply with The
building code.
Level R S5 2. Architectural drawings to be read as a set
11365 and in conjunction with relevant architectural
C1 and structural drawings, calculations,
Master Family specifications and all other consent

2400
G3 documentation.
S3
Level 1 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
8920 dimensions in preference to scaled.
S6
G5 Living Garage 4. Construction work to be in accordance with

2400
New Zealand Building code and standards.
Not included termal
envalope. Insulation to all
5. All proprietary and manufactured items to be
S1 walls and ceilings.
Level 0 installed in accordance with manufacturers
specifications.
6200
S2 C10
Building Consent

Revision Schedule
No Description Date

1 Lot 2 Section 1
C1-01 1 : 100
1
C3-01

2
R2 F12-01
idc group
S4 land development consultants
S5
Level R
Unit 4, building D, 4 Pacific Rise,
11365 S6 Mt Wellington,
Auckland. New Zealand.
C4b
2400

p.o. box 91421 Victoria Street West. Auckland


G3 Bedroom 2 Shower
1927

phone: 09 970 1018


G7 email: info@idcltd.co.nz
Level 1 D3
8920 project:
G4
C1 74 Jolson Road, Mt Wellington
2400

Living Entry
C13
S1 title:
Level 0
Lot 2 Sections
6200
C10
designed by drawn by checked by
JL FA JL
drawing no. date scale
C3-01 12/07/2021 1 : 100@ A3

Job No: 1528

2 Lot 2 Section 2 Client: Owner


Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
C1-01 1 : 100 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.
Extent of outlook
infringment. 3. The contractor shall verify all dimensions on

N
5.

40.63 5. site before commencing the work. Use figured

5.
20

23 4m dimensions in preference to scaled.

6.
82

7.
20m² outdoor living

73
4. Construction work to be in accordance with

17
New Zealand Building code and standards.
1m yard setback

7.
5. All proprietary and manufactured items to be

18
installed in accordance with manufacturers
specifications.
Site Service Legend

6m
5000
5.
5.

dp 25
27

4000
DP Downpipe Building Consent
7
9 8

7.
6
CP Cesspit (silttrap)

setback
6.
10 Revision Schedule

20
5

49
11 4 No Description Date
CD Channel drain

7.
Garage 12 3

1m yard
13 2

30
14 1
15 FW Floor waste gully
UP
vp
6200 Dining GT Gully trap
W

TV Terminal vent

7.
Living

09

7.
VP Vent pipe

17
gt
5.

Entry ds from above


Ne

DS
IL

Discharge stack
18

ds
w
4

Kitchen idc group


I SC
.52 5.

Manhole
L
S
4 o

F land development consultants


.

Soak hole
33 n9

6.
dp
5.

6.141°02 6.8 IL
1

87

IJ Inspection junction Unit 4, building D, 4 Pacific Rise,


27

99
Mt Wellington,
Auckland. New Zealand.
Stormlite 850L
IB Inspection bend
New BC
detention tank p.o. box 91421 Victoria Street West. Auckland
5.

Sanitary sewer (1:60min gradient)


IL 4.65
5.

phone: 09 970 1018


39

6.76

email: info@idcltd.co.nz
22

New BC
'

Stormwater (1:100min gradient)


6.46

IL 4.34 project:
Pr 50 .06 in
Drainage Coil 74 Jolson Road, Mt Wellington
5.

10 6 52
op m
4L
20

Overhead Power Line


5.

Stormlite 800L
L 4.

title:
40

SWm d
Lot 3 Site Plan - Level 0
M ia R
3_Level 0
H C
designed by drawn by checked by

1 JL FA JL
B/
1 : 100 drawing no.
D0-01
date
12/07/2021
scale
1 : 100@ A3
2

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

N
5.

5.
3. The contractor shall verify all dimensions on
40.63

5.
site before commencing the work. Use figured

20

23

6.
dimensions in preference to scaled.

82

7.
73

17
4. Construction work to be in accordance with
New Zealand Building code and standards.

7.
18
5. All proprietary and manufactured items to be
installed in accordance with manufacturers
specifications.
3m

5.
5.

25
27
Building Consent

3m

7.
6.

20
Revision Schedule

TV

49
Family vp No Description Date

7.
30
8920

W/r
Master

7.
09

7.
ds to below

17
Bedroom 2
5.

Bedroom 1
18

Shower ds/tv
idc group
IL

Ens.
. 4

land development consultants


3

tv
5.

6.
1m
319

6.141°02 6.8
5.
1m

87

99
27
Unit 4, building D, 4 Pacific Rise,
1m Mt Wellington,
Auckland. New Zealand.
1m
p.o. box 91421 Victoria Street West. Auckland
5.
5.

39

phone: 09 970 1018

6.76
22

email: info@idcltd.co.nz

New BC

'
6.46
IL 4.34 project:
5.

74 Jolson Road, Mt Wellington

4
20

title:
3_Level 1 Lot 3 Site Plan - Level 1
2 1 : 100
designed by drawn by checked by
JL FA JL
drawing no. date scale
D0-02 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

Sanitary plumbing and drainage system to be designed and installed by Fixture Fixture Unit Discharge Pipe Ø Gradient 1. All work to comply with NZ Building Code,
licensed plumber drainlayer. To AS/NZS 3500 part 2 requirements. As Building Regulations1992, Building Act 2004
modified by NZBC:G13/AS3. Basin 1 32/40mm 1:20/1:40 and amendments and all T.A requirements.
Bath 4 40mm 1:40 New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
All branch drains to be minimum 100Ø at 1:60min. gradient towards Cleaner's Sink 1 40mm 1:40
Alternative solutions to comply with The
discharge stack. Additional vent pipe to branch drain exceeding 10m. Bathroom Group 6 80mm 1:60 building code.
Dishwasher 3 40mm 1:40
Where possible connect air admittance valve to main discharge stack Kitchen Sink 3 50mm 1:40 2. Architectural drawings to be read as a set
vent at highest possible point. Air admittance valves to be accessable. Laundry(Tub&Washing Machine) 5 40mm 1:40 and in conjunction with relevant architectural
Shower 2 40mm 1:40 and structural drawings, calculations,
specifications and all other consent
Water Closet Pan 4 80mm 1:60
documentation.
Floor Waste Gully 0 50mm 1:40
S.S. Line 100mm 1:60 min. 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.
Roof clearance as required

Roof clearance as required

Roof clearance as required


Building Consent

Revision Schedule
No Description Date
Roof
Level 1 Ceiling
50mmØ vent pipe

50mmØ vent pipe

50mmØ vent pipe


shower Ens.

fwg fwg Level 1 Floor Line idc group


ib ij Level 0 Ceiling land development consultants

100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient)


Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
100mmØ discharge stack pipe

100mmØ discharge stack pipe

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz
laundry Kitchen wc

50mmØ vent pipe


project:
74 Jolson Road, Mt Wellington

title:

fwg fwg Level 0 Floor Line Lot 3 Plumbing Schematic


ij ij Ground Line
100mmØ PVC (1:60min. gradient) designed by drawn by checked by
JL FA JL
ib drawing no. date scale
D0-03 12/07/2021 n.t.s@ A3

To SS connection. 100mmØ PVC (1:60min. gradient) Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.
3-W1 (2.5m+45°)
Eave Level: 11071 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
Ground Level: 5820
and structural drawings, calculations,
Distance to boundary: 2811 specifications and all other consent
Max. allowable height: 11131

N
documentation.

5.

5.
40.63 Clearance: 60 3-W 1

5.
20

23

6.
OK 3. The contractor shall verify all dimensions on

82

7.
site before commencing the work. Use figured

73

17
dimensions in preference to scaled.

7.
Fence line 4. Construction work to be in accordance with

18
New Zealand Building code and standards.

2811
5. All proprietary and manufactured items to be

5.
installed in accordance with manufacturers

5.

25
specifications.

27
11071

7.
Building Consent

6.

20
49

7.
Revision Schedule

30
No Description Date

Fence li
12°

12°

7.
12°

09

7.
3-N1 (2.5m+45°)

17
5.

Eave Level: 11434

ne
18

Ground Level: 6915

12°
Distance to boundary: 2300
IL

11433 Max. allowable height: 11715


4

Clearance: 281 idc group


.3 9

OK
5.

6.
31

5.

6.141°02 6.8 IL
87
land development consultants

3-N1
27 Retain

99
2300
Unit 4, building D, 4 Pacific Rise,

New BC Mt Wellington,
5.

Auckland. New Zealand.

IL 4.65
5.

39

p.o. box 91421 Victoria Street West. Auckland

6.76
22

New BC

'
6.46
phone: 09 970 1018

IL 4.34 email: info@idcltd.co.nz


ing wa

Pr 50 .06 in
5.

10 6 52
project:

op m
4L
20

74 Jolson Road, Mt Wellington


Stormlite 800L

L 4.

SWm d
ll

title:

M ia R
3_Level R Lot 3 Critical Points Calculation

H C
3 1 : 100

B/
designed by drawn by checked by
JL FA JL

2
drawing no. date scale
D0-04 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Weathertightness Risk Matrix Lot 3 New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
Elevation 1- East building code.
RISK FACTOR LOW MED HIGH V.HIGH SubTotal
Wind Zone (per NZS 3604) 0 0 1 2 0 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
Number of Stories 0 1 2 4 2 and structural drawings, calculations,
Roof/ Wall Intersection Design 0 1 3 5 5 specifications and all other consent
Eaves Width 0 1 2 5 5 documentation.
Envelope Complexity 0 1 3 6 1
Deck Design 0 2 4 6 0 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
total risk score MEDIUM RISK 13 dimensions in preference to scaled.

4. Construction work to be in accordance with


Elevation 2- South New Zealand Building code and standards.
RISK FACTOR LOW MED HIGH V.HIGH SubTotal
5. All proprietary and manufactured items to be
Wind Zone (per NZS 3604) 0 0 1 2 0 installed in accordance with manufacturers
Number of Stories 0 1 2 4 2 specifications.
Roof/ Wall Intersection Design 0 1 3 5 1
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 1 Building Consent
Deck Design 0 2 4 6 0
Revision Schedule
total risk score MEDIUM RISK 9 No Description Date

Elevation 3- West
RISK FACTOR LOW MED HIGH V.HIGH SubTotal
Wind Zone (per NZS 3604) 0 0 1 2 0
Number of Stories 0 1 2 4 2
Roof/ Wall Intersection Design 0 1 3 5 1
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 0
Deck Design 0 2 4 6 0
total risk score MEDIUM RISK 8
idc group
Elevation 4- North land development consultants
RISK FACTOR LOW MED HIGH V.HIGH SubTotal
Wind Zone (per NZS 3604) 0 0 1 2 0 Unit 4, building D, 4 Pacific Rise,
Number of Stories 0 1 2 4 2 Mt Wellington,
Auckland. New Zealand.
Roof/ Wall Intersection Design 0 1 3 5 5
p.o. box 91421 Victoria Street West. Auckland
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 1 phone: 09 970 1018

Deck Design 0 2 4 6 0 email: info@idcltd.co.nz

total risk score MEDIUM RISK 13 project:


74 Jolson Road, Mt Wellington

title:
Lot 3 H1 Calculation & Risk
Matrix

designed by drawn by checked by


JL FA JL
drawing no. date scale
D0-05 12/07/2021 1 : 1@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Foundation design by Cornerstone general notes:
Engineering Ltd. Refer to Engineer's plans and
Details. Setout to be by Licensed Surveyor. 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.
11430
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
3300 2110 3130 190 2700 4408

N
5.

5.
and structural drawings, calculations,
40.63 150

5.
specifications and all other consent

20

23
Setout

6.
documentation.

82

7.
73

17
3. The contractor shall verify all dimensions on
400 wide openings in foundation to
site before commencing the work. Use figured
allow for floor water flow shown in

7.
dimensions in preference to scaled.

Setout
grey. openings to also be used for suspended slab slab on ground

18
subfloor ventilation. Openings to be 3399 4. Construction work to be in accordance with
spaced by mulitples of 400. 400 400 New Zealand Building code and standards.

5.
Openinings to be located away

5.

25
5. All proprietary and manufactured items to be

Setout
4298
from steel beams point loads.

27
installed in accordance with manufacturers
400

400
specifications.

7.
6.

2000
400

20
Suspended concrete

49
Refer to Engieer's

7.
system. Refer to Engineer's Building Consent
drawings for concrete slab

30
drawings for specification.
on ground specification. Revision Schedule
400
5700

Outline of masonry No Description Date

foundation wall below 150

7200
Setout 6200 Refer to Engieer's

7.
Rebate at garage door threshold. drawings for location of

09
piles and masonry

5200
7.
foundation wall within

17
5.

subfloor.
420
18
1000 500

500

6.
Setout
1950

28
5.

6.
5.

6.141°02 6.8
400 900 idc group
19

87
27

99
land development consultants

Setout
3608
5.
5.

Unit 4, building D, 4 Pacific Rise,

39
Mt Wellington,

6.76
22

Auckland. New Zealand.

'
6.46
p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


5.

email: info@idcltd.co.nz

4
20

5.

project:
40

190 3020 1910 6310 1877 74 Jolson Road, Mt Wellington


Setout
title:
Lot 3 Slab Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
D0-06 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


D2-02
and in conjunction with relevant architectural
2
and structural drawings, calculations,
specifications and all other consent
4 D3-01 documentation.
D2-02 3 1 D2-01
2 11430 3. The contractor shall verify all dimensions on

N
site before commencing the work. Use figured
5410 6020 dimensions in preference to scaled.
D2-01
190 3020 90 965 90 915 140 5930 90 4. Construction work to be in accordance with
New Zealand Building code and standards.

5. All proprietary and manufactured items to be


D3 6050 installed in accordance with manufacturers
specifications.

Deck less than 1m


DN
1 2 3 4 5 above ground. exempt Building Consent
from Building Consent.

140
90

90

3/W0-02 9 8
7
6 Revision Schedule

2000
10

1860
G6 5
4
No Description Date
11
2920

3
12 outline of floor aboeve
13 2
Garage

90
14 1
M2

710 X 1980
17 m²
15
UP 3/W0-03
5700

5520

90 1220 90

Dining

3/W0-04
1020 X 1980
1 1
W

7200
D3-01 8 m² D3-01
C13
C4c Living

5020

5200
2700w X 2100h
760 X 1980

Entry 18 m²
1700

Garage door C1
90 910 90 410 90

3 m²
6200 Kitchen idc group
1000 500

500

Rangehood , extract
90 910 90

3/W0-01 7 m² throguh wall.


F6 land development consultants
F

90
3/W0-05 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

190 3020 90 520 90355 90 6985 90 M1


phone: 09 970 1018
email: info@idcltd.co.nz
190 3020 90 1820 90 6130 90

3210 1910 6310 project:


74 Jolson Road, Mt Wellington

2
title:
D3-01
Lot 3 Floor Plan - Level 0

Lot 3 Window Schedule - Level 0


designed by drawn by checked by
Mark Width Height Sill Height Head Height JL FA JL
drawing no. date scale
D1-01 12/07/2021 1 : 100@ A3
3/W0-01 1600 2100 0 2100
Job No: 1528
3/W0-02 1500 2100 0 2100 Client: Owner
Contact: 027 872 2235
3/W0-03 2800 2100 0 2100 DP No: Lot 91 DP 45393
CT No: NA75B/471
3/W0-04 1800 2100 0 2100
COPYRIGHT
3/W0-05 1800 500 1600 2100 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


D2-02 and in conjunction with relevant architectural
and structural drawings, calculations,
2 specifications and all other consent
4 D3-01
documentation.
D2-02 3 1 D2-01 3. The contractor shall verify all dimensions on
2 site before commencing the work. Use figured

N
dimensions in preference to scaled.
11430
D2-01 4. Construction work to be in accordance with
5410 6020 New Zealand Building code and standards.

190 4120 1010 90 520 90 2210 90 3020 90 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
Extent of racking specifications.
shown in red. 2000
min. headroom
Building Consent
3/W1-01 3/W1-02

90 1200 90 920 90 1560 140


90

7 Revision Schedule
9 8
6

1700
10 No Description Date
D1
2020

TV
11 4
Family 12 3 3/W1-03
13
9 m²

760 X 1980
760 X 1980
14
8920
90 1210 90 520 90 990

15
C6 DN 710 X 1980
C1
C4c

W/r
6910

1 1

3/W1-04
1220 X 1980

7200
1220 X 1980 Master
D3-01 3 m² D3-01
760 X 1980
1420 X 1980
760 X 1980

14 m²

5500
C13

1710
Bedroom 2
710 X 1980 Bedroom 1
9 m² Shower 760 X 1980 idc group
1720

90 1220 90
10 m²

3/W1-05
3 m² Ens. land development consultants
C4b

4 m²
90
290

3/W1-08 3/W1-07 Unit 4, building D, 4 Pacific Rise,


3/W1-06 Mt Wellington,
Auckland. New Zealand.
C4b C4a p.o. box 91421 Victoria Street West. Auckland
190 1455 90 1475 90 920 90 1620 90 2210 90 3020 90
phone: 09 970 1018
email: info@idcltd.co.nz
190 3020 90 1820 90 3020 90 3020 90

5120 6310 project:


74 Jolson Road, Mt Wellington

2
Lot 3 Window Schedule - Level 1
title:
D3-01 Mark Width Height Sill Height Head Height Lot 3 Floor Plan - Level 1

3/W1-01 1800 1000 1000 2000 designed by drawn by checked by


3/W1-02 1000 2000 0 2000 JL FA JL
drawing no. date scale
3/W1-03 2400 1000 1000 2000
D1-02 12/07/2021 1 : 100@ A3
3/W1-04 1800 400 1600 2000
3/W1-05 800 1000 1000 2000 Job No: 1528
Client: Owner
3/W1-06 1800 1000 1000 2000 Contact: 027 872 2235
DP No: Lot 91 DP 45393
3/W1-07 600 1800 400 2200 CT No: NA75B/471
COPYRIGHT
3/W1-08 1800 1800 400 2200 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for roof notes. general notes:
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

D2-02 2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
4 specifications and all other consent
D2-02 3 1 D2-01 documentation.
2 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured

N
dimensions in preference to scaled.
D2-01
2
4. Construction work to be in accordance with
D3-01 New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
50 specifications.

80Ø dp
Building Consent
50

Revision Schedule
S4 No Description Date

50
12°
R2
1 1
D3-01 D3-01
12°

S5
50

12°
80Ø dp
idc group
land development consultants
50

50
150
50 50 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

2 phone: 09 970 1018


email: info@idcltd.co.nz
D3-01

project:
74 Jolson Road, Mt Wellington

title:
Lot 3 Roof Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
D1-03 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
1
D3-01
Refer to Key Notes for Elevation notes. general notes:

1. All work to comply with NZ Building Code,


R2 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
C4b Alternative solutions to comply with The
Level R
building code.

60
11365
3/W1-04 3-W1 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
3/W1-05
C1 and structural drawings, calculations,
specifications and all other consent
Level 1 documentation.
8920 3. The contractor shall verify all dimensions on
C13 site before commencing the work. Use figured
dimensions in preference to scaled.
M1
4. Construction work to be in accordance with
New Zealand Building code and standards.
Level 0 3/W0-04
6200 5. All proprietary and manufactured items to be
5820 installed in accordance with manufacturers
Existing ground line. specifications.

Building Consent

1 Lot 3 Elevation - North Revision Schedule


No Description Date
D1-01 1 : 100

2
D3-01

Non-structural window
shroud to be designed and
installed by others.
R2 idc group
land development consultants

281
Level R
Unit 4, building D, 4 Pacific Rise,
11365 3-N1 Mt Wellington,
Auckland. New Zealand.

C4b C13 p.o. box 91421 Victoria Street West. Auckland


3/W1-06
phone: 09 970 1018
3/W1-08 3/W1-07
Level 1 C4a email: info@idcltd.co.nz

8920 project:
3/W0-05 M1 74 Jolson Road, Mt Wellington

title:
Level 0 3/W0-01 6915
Lot 3 Elevations
6200
Existing ground line
designed by drawn by checked by
Opening in foundation to
JL FA JL
allow for flood water flow.
C10 C1 drawing no. date scale
D2-01 12/07/2021 1 : 100@ A3

2 Lot 3 Elevation - East Job No: 1528


Client: Owner
Contact: 027 872 2235
D1-01 1 : 100 DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:
1
1. All work to comply with NZ Building Code,
D3-01 R2 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Level R Alternative solutions to comply with The
building code.

60
11365
C4b
2. Architectural drawings to be read as a set
Extent of F5 shown and in conjunction with relevant architectural
with orange hatch and structural drawings, calculations,
specifications and all other consent
Level 1 C4a documentation.
8920
3. The contractor shall verify all dimensions on
C4c site before commencing the work. Use figured
dimensions in preference to scaled.
D3
4. Construction work to be in accordance with
Level 0 C10 New Zealand Building code and standards.

6200 5. All proprietary and manufactured items to be


5820 installed in accordance with manufacturers
specifications.

Opening in foundation to
allow for flood water flow. Building Consent

Revision Schedule

3 Lot 3 Elevation - South No Description Date

D1-01 1 : 100

2
D3-01

R2 idc group
land development consultants
281

Level R
11365 3-N1
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
C13
3/W1-03 3/W1-01 p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


Level 1 3/W1-02 email: info@idcltd.co.nz

8920
project:
6915 3/W0-03 3/W0-02 C1
74 Jolson Road, Mt Wellington
D3
Level 0 title:
Lot 3 Elevations
6200 C10

designed by drawn by checked by


Existing ground line
JL FA JL
Opening in foundation to drawing no. date scale
allow for flood water flow. D2-02 12/07/2021 1 : 100@ A3

4 Lot 3 Elevation - West Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
D1-01 1 : 100 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Section notes. general notes:

1. All work to comply with NZ Building Code,


2 Building Regulations1992, Building Act 2004
D3-01 and amendments and all T.A requirements.
New Zealand Standards, Compliance
S5 documents, NZS3604 2011 and amendments.
R2
Alternative solutions to comply with The
building code.
Level R
2. Architectural drawings to be read as a set
11365 S6 and in conjunction with relevant architectural
W/r Master and structural drawings, calculations,

2400
specifications and all other consent
S3 C1 documentation.

Level 1 3. The contractor shall verify all dimensions on


F5 G3 site before commencing the work. Use figured
8920 dimensions in preference to scaled.

G5 C13 4. Construction work to be in accordance with


Garage Living Dining

2400
New Zealand Building code and standards.
Not included termal
C4c envalope. Insulation to all S7
walls and ceilings. 5. All proprietary and manufactured items to be
Level 0 installed in accordance with manufacturers
6200 specifications.
C10 S2 S1
Building Consent
S1 G1
Revision Schedule
No Description Date

1 Lot 3 Section 1
D1-01 1 : 100

1
D3-01
3 R2
F12-02 idc group
S5 land development consultants
Level R S4
11365 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
C4b Auckland. New Zealand.
S6
2400

2044
Shower Bedroom 1 p.o. box 91421 Victoria Street West. Auckland

G7 phone: 09 970 1018


Level 1 D3 email: info@idcltd.co.nz

8920
F6 G3 project:
74 Jolson Road, Mt Wellington
2400

Entry Living
C13 C1
Level 0 title:

6200 Lot 3 Sections

C10 S1
designed by drawn by checked by
JL FA JL
drawing no. date scale
D3-01 12/07/2021 1 : 100@ A3

2 Lot 3 Section 2 Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
D1-01 1 : 100 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set

N
and in conjunction with relevant architectural

5.

6.
and structural drawings, calculations,

5.

6.141°02 6.8 IL L 4 blic3


specifications and all other consent

19

87
detention tank

27

99
documentation.

3. The contractor shall verify all dimensions on


New BC site before commencing the work. Use figured

5.
IL 4.65

5.
3941 dimensions in preference to scaled.

39

6.76
22
New BC

'
4. Construction work to be in accordance with

6.46
New Zealand Building code and standards.
IL 4.34
5. All proprietary and manufactured items to be

5.

4
installed in accordance with manufacturers

20
specifications.

5.
20m² outdoor living.
Stormlite 800L Stormlite 800L

40

6.51
detention tank detention tank

I
Ne 4.4 S
Building Consent

4. .42
IL w S21
5.

pu 6.8
N L24

w 1 Co

5742

52 o
I2
e .

5.

6.03
SW
Revision Schedule

36
No Description Date

in ut
Site Service Legend

Co
Entry

25.49
Dining

n
DP Downpipe

6.65
Garage
n CP Cesspit (silttrap)

5.
F
W

CD Channel drain

38
6200

6.
Kitchen
F

UP Living FW Floor waste gully

73
15
14 1
13 2 GT Gully trap
ds
12
11
3
4 TV
idc group
10
5 TV Terminal vent land development consultants
dp 9 8
6 gt dp ds
7
VP Vent pipe
5.
dp Unit 4, building D, 4 Pacific Rise,
dp

6.
53
Mt Wellington,
1m yard setback. DS Discharge stack Auckland. New Zealand.
5.

82 81
5.

6.35
41

p.o. box 91421 Victoria Street West. Auckland


60

Manhole
phone: 09 970 1018

6.
email: info@idcltd.co.nz
Soak hole

IJ Inspection junction
6.

project:
6.

7.
6.

6.
13

00

74 Jolson Road, Mt Wellington


08
30

53

IB Inspection bend

Sanitary sewer (1:60min gradient)


title:
Lot 4 Site Plan - Level 0
4_Level 0 Stormwater (1:100min gradient)

1 1 : 100
Drainage Coil
designed by drawn by checked by
JL FA JL
Overhead Power Line drawing no. date scale
E0-01 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set

N
and in conjunction with relevant architectural

5.

6.
and structural drawings, calculations,

5.

6.141°02 6.8 IL L 4 blic3


19

87
detention tank specifications and all other consent

27

99
documentation.

New BC 3. The contractor shall verify all dimensions on

5.
site before commencing the work. Use figured
IL 4.65

5.

39
dimensions in preference to scaled.

6.76
22
New BC

'
6.46
4. Construction work to be in accordance with
IL 4.34 New Zealand Building code and standards.

5.
3m 5. All proprietary and manufactured items to be

4
20
installed in accordance with manufacturers

5.
Stormlite 800L specifications.

40
3m

6.51
1m detention
1m tank

I
Ne 4.4

4. .42
IL
Building Consent

5.

pu 6.8
1m

1m

5.
w 1

52 o
I2L2

5.

6.03
22
SW
4

36
Revision Schedule

.21

in ut
No Description Date

Co
Bedroom 1 Bedroom 2

25.49
n
Master

6.65
5.
8920

38

6.
UP Ens.

73
15
14 1 W/r
13 2
12
11
3
4
5
idc group
10
ds/tv 6 ds/tv land development consultants
Shower 9 8
7

5.

6.
53 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
5.

82 81
5.

Auckland. New Zealand.

6.35
41

60

p.o. box 91421 Victoria Street West. Auckland

6.
phone: 09 970 1018
email: info@idcltd.co.nz
6.

6.

7.
6.

6.

project:
13

00

08
30

53

74 Jolson Road, Mt Wellington

4_Level 1 title:
2 1 : 100
Lot 4 Site Plan - Level 1

designed by drawn by checked by


JL FA JL
drawing no. date scale
E0-02 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

Sanitary plumbing and drainage system to be designed and installed by Fixture Fixture Unit Discharge Pipe Ø Gradient 1. All work to comply with NZ Building Code,
licensed plumber drainlayer. To AS/NZS 3500 part 2 requirements. As Building Regulations1992, Building Act 2004
modified by NZBC:G13/AS3. Basin 1 32/40mm 1:20/1:40 and amendments and all T.A requirements.
Bath 4 40mm 1:40 New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
All branch drains to be minimum 100Ø at 1:60min. gradient towards Cleaner's Sink 1 40mm 1:40
Alternative solutions to comply with The
discharge stack. Additional vent pipe to branch drain exceeding 10m. Bathroom Group 6 80mm 1:60 building code.
Dishwasher 3 40mm 1:40
Where possible connect air admittance valve to main discharge stack Kitchen Sink 3 50mm 1:40 2. Architectural drawings to be read as a set
vent at highest possible point. Air admittance valves to be accessable. Laundry(Tub&Washing Machine) 5 40mm 1:40 and in conjunction with relevant architectural
Shower 2 40mm 1:40 and structural drawings, calculations,
specifications and all other consent
Water Closet Pan 4 80mm 1:60
documentation.
Floor Waste Gully 0 50mm 1:40
S.S. Line 100mm 1:60 min. 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Roof clearance as required

Roof clearance as required


Building Consent

Revision Schedule
No Description Date
Roof
Level 1 Ceiling
50mmØ vent pipe

50mmØ vent pipe


Ens. shower

fwg fwg Level 1 Floor Line idc group


ij ij Level 0 Ceiling land development consultants
100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient)
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
100mmØ discharge stack pipe

100mmØ discharge stack pipe


p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz
Kitchen laundry wc
project:
74 Jolson Road, Mt Wellington

title:

fwg fwg Level 0 Floor Line Lot 4 Plumbing Schematic


Ground Line
100mmØ PVC (1:60min. gradient) designed by drawn by checked by
JL FA JL
ib drawing no. date scale
ij E0-03 12/07/2021 n.t.s@ A3

To SS connection. 100mmØ PVC (1:60min. gradient)


Job No: 1528
Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

detention tank 3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

N
4. Construction work to be in accordance with
New Zealand Building code and standards.

5.
4739 5. All proprietary and manufactured items to be

20
installed in accordance with manufacturers
specifications.
Stormlite 800L
detention tank
Stormlite 800L

5.
5.
Building Consent
New 150mm dia upvc 5700

Ne 4.3 S C
detention tank

31
NeL 4.

31
IL w S 0
I

w 0 on
SN16 27.4m @ 1% public 20m² outdoor living.

3600
Revision Schedule

SW
No Description Date

2
Entry

Co
2 m² dp

n
gt Site Service Legend

Garage Dining Kitchen DP Downpipe


8 m²

W
17 m² 7 m² CP Cesspit (silttrap)

CD Channel drain

F
6200 UP
15
14 1
idc group
13 2 FW Floor waste gully
ds 12 3 Living land development consultants
11 4

10
5 13 m² GT Gully trap
dp 6
Unit 4, building D, 4 Pacific Rise,
9 8
7 TV Mt Wellington,
TV Terminal vent Auckland. New Zealand.

dp ds p.o. box 91421 Victoria Street West. Auckland


VP Vent pipe
5.
5.

phone: 09 970 1018


46
49

1m yard setback DS Discharge stack email: info@idcltd.co.nz

Manhole project:
35.71
6.

6.

6. 74 Jolson Road, Mt Wellington


Soak hole
17

19

13
IJ Inspection junction title:

IB Inspection bend Lot 5 Site Plan - Level 0

5_Level 0 Sanitary sewer (1:60min gradient)

1 1 : 100 Stormwater (1:100min gradient)


designed by
JL
drawing no.
drawn by
FA
date
checked by
JL
scale
E0-04 12/07/2021 1 : 100@ A3
Drainage Coil
Job No: 1528
Client: Owner
Overhead Power Line Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

detention tank 3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

N
4. Construction work to be in accordance with
New Zealand Building code and standards.

5.
5. All proprietary and manufactured items to be

20
installed in accordance with manufacturers
specifications.

Stormlite 800L

5.
5.
Building Consent
New 150mm dia upvc

Ne 4.3 S C
detention tank

31
NeL 4.

31
IL w S 0
I

w 0 on
SN16 27.4m @ 1% public Revision Schedule

SW
No Description Date

Co
n
Bedroom 1 Bedroom 2
Master

8920
DN
Shower
15
14 1
Bathroom
idc group
13 2
12 3 W/r land development consultants
11 4
5.

5
10
ds/tv
37

6
9 8 Unit 4, building D, 4 Pacific Rise,
7 Mt Wellington,
Auckland. New Zealand.

ds/tv p.o. box 91421 Victoria Street West. Auckland


5.
5.

5.
phone: 09 970 1018
46
49

40
email: info@idcltd.co.nz

project:
35.71
6.

6.

74 Jolson Road, Mt Wellington


6.
17

19

13
title:

5_Level 1 Lot 5 Site Plan - Level 1

2 1 : 100 designed by drawn by checked by


JL FA JL
drawing no. date scale
E0-05 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

Sanitary plumbing and drainage system to be designed and installed by Fixture Fixture Unit Discharge Pipe Ø Gradient 1. All work to comply with NZ Building Code,
licensed plumber drainlayer. To AS/NZS 3500 part 2 requirements. As Building Regulations1992, Building Act 2004
modified by NZBC:G13/AS3. Basin 1 32/40mm 1:20/1:40 and amendments and all T.A requirements.
Bath 4 40mm 1:40 New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
All branch drains to be minimum 100Ø at 1:60min. gradient towards Cleaner's Sink 1 40mm 1:40
Alternative solutions to comply with The
discharge stack. Additional vent pipe to branch drain exceeding 10m. Bathroom Group 6 80mm 1:60 building code.
Dishwasher 3 40mm 1:40
Where possible connect air admittance valve to main discharge stack Kitchen Sink 3 50mm 1:40 2. Architectural drawings to be read as a set
vent at highest possible point. Air admittance valves to be accessable. Laundry(Tub&Washing Machine) 5 40mm 1:40 and in conjunction with relevant architectural
Shower 2 40mm 1:40 and structural drawings, calculations,
specifications and all other consent
Water Closet Pan 4 80mm 1:60
documentation.
Floor Waste Gully 0 50mm 1:40
S.S. Line 100mm 1:60 min. 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Roof clearance as required

Roof clearance as required


Building Consent

Revision Schedule
No Description Date
Roof
Level 1 Ceiling

50mmØ vent pipe

50mmØ vent pipe


Bathroom shower

fwg fwg Level 1 Floor Line idc group


ij ij Level 0 Ceiling land development consultants

100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient)


Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
100mmØ discharge stack pipe

100mmØ discharge stack pipe


p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz
Kitchen laundry wc
project:
74 Jolson Road, Mt Wellington

title:

fwg fwg Level 0 Floor Line Lot 5 Plumbing Schematic


Ground Line
100mmØ PVC (1:60min. gradient) designed by drawn by checked by
JL FA JL
ij ib drawing no. date scale
E0-06 12/07/2021 n.t.s@ A3

To SS connection. 100mmØ PVC (1:60min. gradient) Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent

N
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

5.
29

5.
4. Construction work to be in accordance with

5. 5.31
New Zealand Building code and standards.

29
30
5. All proprietary and manufactured items to be

5.
installed in accordance with manufacturers

5.28 specifications.

30
Building Consent
Vehicle passing bay. New 150mm dia upvc
Pr 5m

Ne 4.
67
op m

Revision Schedule
SN16 27.4m @ 1% public
IL
No Description Date
310°06'A/1

w 08
Ce x 4

dp

SS
detention tank
TV
ss 50

Co
pit m

Living Entry

n
Dining
Site Service Legend
Stormlite 3200L
5.

detention tank (for DP


m

Garage Downpipe
42

W
driveway)
6200 CP Cesspit (silttrap)

idc group
8920

CD Channel drain
Kitchen 15
UP FW
14
13
Floor waste gully land development consultants
1

gt ds
5.
10.92

F 2
12
3 GT Gully trap
53

Unit 4, building D, 4 Pacific Rise,


4
5 6 7 8 9 10 11
dp Mt Wellington,
dp Auckland. New Zealand.

Stormlite 800L ds dp TV Terminal vent


5.

5.
p.o. box 91421 Victoria Street West. Auckland
detention tank
54

VP
56
1m yard setback Vent pipe

5.
phone: 09 970 1018
email: info@idcltd.co.nz

52
DS Discharge stack
34m² outdoor living
project:
Manhole
220°06' 74 Jolson Road, Mt Wellington
5.

5.
5.

5.

66

Soak hole
54
67

68

3839
title:
IJ Inspection junction
Lot 6 Site Plan - Level 0
6_Level 0 IB Inspection bend

1 1 : 100
Sanitary sewer (1:60min gradient) designed by drawn by
FA
checked by
JL JL
Stormwater (1:100min gradient) drawing no. date scale
E0-07 12/07/2021 1 : 100@ A3
Drainage Coil Job No: 1528
Client: Owner
Contact: 027 872 2235
Overhead Power Line DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on

N
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with

5.
New Zealand Building code and standards.

29

5.
5. 5.31
5. All proprietary and manufactured items to be

29
30
installed in accordance with manufacturers
specifications.

5.
5.28

30
Building Consent
3m
Revision Schedule
New 150mm dia upvc

3m
Pr 5m

No Description Date
1m 1m
Ne 4.
67
op m

IL SN16 27.4m @ 1% public

1m

1m
310°06'A/1

w 08
Ce x 4

SS
detention tank
ss 50

Co
pit m

n Bedroom 1 Bedroom 2
Master
5.
m

42

8920
idc group
Ens. land development consultants
Shower
DN 15
14
13 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
5.
10.92

2
12 Auckland. New Zealand.
3
53

5 6 7 8 9 10 11
4 p.o. box 91421 Victoria Street West. Auckland

ds/tv phone: 09 970 1018


5.

5.

ds/tv email: info@idcltd.co.nz


54

56

5.
52
project:
74 Jolson Road, Mt Wellington

220°06'
5.

5.
5.

5.

title:
66

54
67

68

Lot 6 Site Plan - Level 1

6_Level 1
2 1 : 100
designed by
JL
drawing no.
drawn by
FA
date
checked by
JL
scale
E0-08 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
Sanitary plumbing and drainage system to be designed and installed by Fixture Fixture Unit Discharge Pipe Ø Gradient
licensed plumber drainlayer. To AS/NZS 3500 part 2 requirements. As 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
modified by NZBC:G13/AS3. Basin 1 32/40mm 1:20/1:40
and amendments and all T.A requirements.
Bath 4 40mm 1:40 New Zealand Standards, Compliance
All branch drains to be minimum 100Ø at 1:60min. gradient towards Cleaner's Sink 1 40mm 1:40 documents, NZS3604 2011 and amendments.
discharge stack. Additional vent pipe to branch drain exceeding 10m. Bathroom Group 6 80mm 1:60 Alternative solutions to comply with The
Dishwasher 3 40mm 1:40 building code.
Where possible connect air admittance valve to main discharge stack Kitchen Sink 3 50mm 1:40
2. Architectural drawings to be read as a set
vent at highest possible point. Air admittance valves to be accessable. Laundry(Tub&Washing Machine) 5 40mm 1:40
and in conjunction with relevant architectural
Shower 2 40mm 1:40 and structural drawings, calculations,
Water Closet Pan 4 80mm 1:60 specifications and all other consent
Floor Waste Gully 0 50mm 1:40 documentation.
S.S. Line 100mm 1:60 min.
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Roof clearance as required

Roof clearance as required


Building Consent

Revision Schedule
No Description Date
Roof
Level 1 Ceiling
50mmØ vent pipe

50mmØ vent pipe


Ens. shower

fwg fwg Level 1 Floor Line idc group


ij ij Level 0 Ceiling
land development consultants
100mmØ PVC (1:60min. gradient) 100mmØ PVC (1:60min. gradient)

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
100mmØ discharge stack pipe

100mmØ discharge stack pipe


Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


Kitchen laundry wc email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
fwg fwg Level 0 Floor Line
Lot 6 Plumbing Schematic
Ground Line
100mmØ PVC (1:60min. gradient)
designed by drawn by checked by
JL FA JL
ib
ij drawing no. date scale
E0-09 12/07/2021 n.t.s@ A3
To SS connection. 100mmØ PVC (1:60min. gradient)
Job No: 1528
Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

N
2. Architectural drawings to be read as a set

5.

6.
and in conjunction with relevant architectural

5.

6.141°02 6.8 IL L 4 blic3


19

87
detention tank and structural drawings, calculations,

27

99
specifications and all other consent
documentation.

New BC 3. The contractor shall verify all dimensions on


IL 4.65

5.
site before commencing the work. Use figured

6.76
22
dimensions in preference to scaled.
New BC

'
6.46
IL 4.34 4. Construction work to be in accordance with
New Zealand Building code and standards.

5.

4
20
5. All proprietary and manufactured items to be

5.
installed in accordance with manufacturers
Stormlite 800L

40
specifications.

6.51
detention tank

I
Ne 4.4

4. .42
IL
5.

pu 6.8
5.
Building Consent

w 1

52 o
I2L2

5.

6.03
22
SW
4

36
.21

in ut
Revision Schedule
No Description Date

Co

25.49
10°
n

6.65
10° 6-N1 (2.5m+45°)
10°

Eave Level: 11434


Ground Level: 6840

6.
Distance to boundary: 2306

73
Max. allowable height: 11646
10°
11434 Clearance: 212
OK
idc group
45°

6-N1
2306 land development consultants
5.
10534

6.
53
Unit 4, building D, 4 Pacific Rise,
5.

82 81
5.
1834

Mt Wellington,

6.35 Auckland. New Zealand.


41

60

p.o. box 91421 Victoria Street West. Auckland

6.
phone: 09 970 1018
4-E1 (2.5m+45°) email: info@idcltd.co.nz

4-E1 Eave Level: 10534


6.

6.

7.
6.

6.

Ground Level: 6460


13

00

project:
08
30

53

Distance to boundary: 1834


Max. allowable height: 10795 74 Jolson Road, Mt Wellington
Clearance: 261
OK title:
Lot 4 Critical Points Calculation
4_Level R
3 1 : 100 designed by
JL
drawn by
FA
checked by
JL
drawing no. date scale
E0-10 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
detention tank Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural

N
and structural drawings, calculations,
specifications and all other consent

5.
documentation.

20
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.
Stormlite 800L

5.
5.
New 150mm dia upvc

Ne 4.3 S C
4. Construction work to be in accordance with
detention tank

31
NeL 4.

31
IL w S 0
New Zealand Building code and standards.

w 0 on
SN16 27.4m @ 1% public 5. All proprietary and manufactured items to be

SW
installed in accordance with manufacturers

2
specifications.

Co
n
Building Consent

10°
Revision Schedule
No Description Date

10°

10°
45°

45°
10284
5. idc group

5.
5.

1834
46

40
49

land development consultants

35.71 Unit 4, building D, 4 Pacific Rise,


6.

5-E1 (2.5m+45°)
6.
Mt Wellington,
5-E1

6.
Auckland. New Zealand.
17

Eave Level: 10284


19

13
Ground Level: 6160 p.o. box 91421 Victoria Street West. Auckland

Distance to boundary: 1834 phone: 09 970 1018


Max. allowable height: 10494 email: info@idcltd.co.nz

Clearance: 210
OK
5_Level R project:
74 Jolson Road, Mt Wellington
3 1 : 100
title:
Lot 5 Critical Points Calculation

designed by drawn by checked by


JL FA JL
drawing no. date scale
E0-11 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance

N
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set

5.
and in conjunction with relevant architectural

29

5.
and structural drawings, calculations,

5. 5.31
specifications and all other consent

29
30
documentation.

3. The contractor shall verify all dimensions on

5.
5.28 site before commencing the work. Use figured

30
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.
Pr 5m 11434 New 150mm dia upvc

Ne 4.
67
op m 5. All proprietary and manufactured items to be
SN16 27.4m @ 1% public

IL
installed in accordance with manufacturers

310°06'A/1

w 08
specifications.
Ce x 4

6-S1

SS
detention tank
3645
ss 50

Co
Building Consent
pit m
6-S1 (2.5m+45°)
Eave Level: 11434

10°
Ground Level: 5370 Revision Schedule
No Description Date
Distance to boundary: 3645
5. 10°
m

Max. allowable height: 11515


42
Clearance: 81

10°
OK
5.
10.92

45°
10664
53

10884
10284
5.

idc group

5.

2734
54
2514

56
2134

5.
land development consultants

52
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,

5. 220°06' Auckland. New Zealand.

5.
5.

5.

6-E1 6-E2 6-E3


66

54
p.o. box 91421 Victoria Street West. Auckland
67

68

phone: 09 970 1018


6-E1 (2.5m+45°) 6-E2 (2.5m+45°) 6-E3 (2.5m+45°) email: info@idcltd.co.nz

Eave Level: 10664 Eave Level: 10284 Eave Level: 10884


Ground Level: 5680 Ground Level: 5660 Ground Level: 6060 project:
Distance to boundary: 2514 Distance to boundary: 2134 Distance to boundary: 2734
74 Jolson Road, Mt Wellington
Max. allowable height: 10694 Max. allowable height: 10294 Max. allowable height: 11294
Clearance: 30 Clearance: 10 Clearance: 410
OK OK OK title:
Lot 6 Critical Points Calculation
6_Level R
3 1 : 100
designed by
JL
drawn by
FA
checked by
JL
drawing no. date scale
E0-12 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
5.

6.
5.

6.141°02 6.8
19

87
Foundation design by Cornerstone

27

99
general notes:

5.
Engineering Ltd. Refer to Engineer's plans and

29

5.

5.
5.3 5.31

5.
1. All work to comply with NZ Building Code,

29

39
Details. Setout to be by Licensed Surveyor.

6.76
22
0

5.

'
Building Regulations1992, Building Act 2004

6.46
20
5.
5.28 and amendments and all T.A requirements.

30

5.

4
4917 New Zealand Standards, Compliance

20

5.

Setout
5.

3592
5.
Setout

documents, NZS3604 2011 and amendments.

40
2450

3839

31

6.51
5.

31
Alternative solutions to comply with The
32

Setout

5.
310°06'

5.
22
building code.

5.

6.03
22
5.36

6. 2
36

83
2. Architectural drawings to be read as a set
6200

5.49
6.65
and in conjunction with relevant architectural
5.

and structural drawings, calculations,


Lot 6 Lot 5 Lot 4
42

5.
specifications and all other consent

38

6.
documentation.

73
3. The contractor shall verify all dimensions on
5.
10.92

5.
53

site before commencing the work. Use figured

37

Setout
Setout

5.

2928
5.
2708

dimensions in preference to scaled.


5.

6.
53
54

56

5.
5.

5.
5.

5.

82 81
5.
6.35

46
49

40
52

41

60
4. Construction work to be in accordance with

6.
220°06' 35.71 New Zealand Building code and standards.
5.

5.
5.

5.

6.

6.
66

6.
54

6.
67

68

17

7.
6.
19

6.
13

00

08
30

53
3840 2015 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
Setout Setout specifications.

N
4,5,6 Overall Slab

5.

6.
5.

6.141°02 6.8 IL L 4 blic3


Building Consent

19

87
2 detention tank

27

99
1 : 200 10395 Revision Schedule

New BC No Description Date

5.
3365 2020 4410 600
IL 4.65
5.

39

6.76
22
New BC

'
6.46
IL 4.34

5.

4
20

5.
5.

Stormlite 800L 400 wide openings in foundation to

40
31

6.51
detention tank allow for floor water flow shown in

I
Ne 4.4 S

4. .42
Rebate at garage door threshold. grey. openings to also be used for
IL w S21
5.

pu 6.8
800 400
N L24

5.
w 1 Co
subfloor ventilation. Openings to be
idc group

52 o
I2
e .

5.

6.03
22
spaced by mulitples of 400.
SW

300
36
600

Openinings to be located away


300

in ut
400
1200

land development consultants


from steel beams point loads.
Co

25.49
2200
490

400 Unit 4, building D, 4 Pacific Rise,


n
Mt Wellington,

6.65
n

Refer to Engieer's drawings Auckland. New Zealand.

for location of piles and p.o. box 91421 Victoria Street West. Auckland
Suspended concrete

400
6200 masonry foundation wall

5.
system. Refer to Engineer's within subfloor.
phone: 09 970 1018

6600
4500

email: info@idcltd.co.nz
drawings for specification.

38

6.
3200
Outline of masonry project:

73
perimeter wall below
74 Jolson Road, Mt Wellington
400

400 title:
900

900

900
400 Lot 4 Slab Plan
5.

400 400
6.
53
5.

82 81
5.

designed by drawn by checked by

6.35 FA
41

JL JL
60

drawing no. date scale


6.
E0-14 12/07/2021 As indicated@ A3

2970 2200 4920 Job No: 1528

4_Level 0 Slab Client: Owner


6.

6.

7.
6.

Contact: 027 872 2235


6.

10090
1
DP No: Lot 91 DP 45393
13

00

08
30

CT No: NA75B/471
53

1 : 100 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Foundation design by Cornerstone general notes:
Engineering Ltd. Refer to Engineer's plans and
Details. Setout to be by Licensed Surveyor. 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


10125 site before commencing the work. Use figured

N
dimensions in preference to scaled.
3238 1150 5610

5.
4. Construction work to be in accordance with

20
New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers

5.
5.
specifications.

31
31
Rebate at garage door threshold. 400 400 400
Building Consent

5.36
400

700 500
Revision Schedule
No Description Date

490
Suspended concrete 400
system. Refer to Engineer's
drawings for specification.
5700

6600
6200

5400
Refer to Engieer's drawings
for location of piles and 400
masonry foundation wall
within subfloor. 400 wide openings in foundation to
idc group
400

400
allow for floor water flow shown in
5.

grey. openings to also be used for


900

37

land development consultants


subfloor ventilation. Openings to be
400 400 spaced by mulitples of 400.
Unit 4, building D, 4 Pacific Rise,
Openinings to be located away
5.

5.
5.
5.

Mt Wellington,
from steel beams point loads. Auckland. New Zealand.
46

40
49
52

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018

3238 6760
35.71 Outline of masonry
email: info@idcltd.co.nz
5.

6.

6.

perimeter wall below


6.
54

17

3148 7155
19

project:

13 74 Jolson Road, Mt Wellington

title:
Lot 5 Slab Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
E0-15 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Foundation design by Cornerstone general notes:
Engineering Ltd. Refer to Engineer's plans and
Details. Setout to be by Licensed Surveyor. 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,

N
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on

5.
site before commencing the work. Use figured

29
dimensions in preference to scaled.

5.
5. 5.31

29
4. Construction work to be in accordance with

30
9458 New Zealand Building code and standards.

5.
5120 1100 3238 5. All proprietary and manufactured items to be
5.28

30
installed in accordance with manufacturers
specifications.

400 400 Building Consent


Rebate at garage door threshold.
310°06'

Revision Schedule
No Description Date

400

400
500
Refer to Engieer's drawings Suspended concrete
for location of piles and system. Refer to Engineer's
6200
masonry foundation wall drawings for specification.
5.

within subfloor.

5700
5920
42

6300
6200

idc group
400 wide openings in foundation to

400
5.
10.92

land development consultants


400

allow for floor water flow shown in


53

600
380

grey. openings to also be used for


Unit 4, building D, 4 Pacific Rise,
subfloor ventilation. Openings to be 400 400 400 Mt Wellington,
5.

5.
Auckland. New Zealand.
spaced by mulitples of 400.
54

56

Openinings to be located away 4055 3425 1978 p.o. box 91421 Victoria Street West. Auckland

5.
Outline of masonry
from steel beams point loads.

52
foundation wall below phone: 09 970 1018
email: info@idcltd.co.nz

220°06' project:
5.

5.
5.

5.

6.
66

74 Jolson Road, Mt Wellington


54
67

68

17
title:
Lot 6 Slab Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
E0-16 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Weathertightness Risk Matrix Lot 4,5,6 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Elevation 1- East New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
RISK FACTOR LOW MED HIGH V.HIGH SubTotal Alternative solutions to comply with The
Wind Zone (per NZS 3604) 0 0 1 2 0 building code.
Number of Stories 0 1 2 4 2
2. Architectural drawings to be read as a set
Roof/ Wall Intersection Design 0 1 3 5 1
and in conjunction with relevant architectural
Eaves Width 0 1 2 5 5 and structural drawings, calculations,
Envelope Complexity 0 1 3 6 0 specifications and all other consent
Deck Design 0 2 4 6 0 documentation.

total risk score MEDIUM RISK 8 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.
Elevation 2- South
RISK FACTOR LOW MED HIGH V.HIGH SubTotal 4. Construction work to be in accordance with
Wind Zone (per NZS 3604) 0 0 1 2 0 New Zealand Building code and standards.
Number of Stories 0 1 2 4 2 5. All proprietary and manufactured items to be
Roof/ Wall Intersection Design 0 1 3 5 5 installed in accordance with manufacturers
Eaves Width 0 1 2 5 5 specifications.
Envelope Complexity 0 1 3 6 1
Deck Design 0 2 4 6 0
Building Consent
total risk score MEDIUM RISK 13
Revision Schedule
Elevation 3- West No Description Date

RISK FACTOR LOW MED HIGH V.HIGH SubTotal


Wind Zone (per NZS 3604) 0 0 1 2 0
Number of Stories 0 1 2 4 2
Roof/ Wall Intersection Design 0 1 3 5 3
Eaves Width 0 1 2 5 5
Envelope Complexity 0 1 3 6 1
Deck Design 0 2 4 6 0
total risk score MEDIUM RISK 11

Elevation 4- North
RISK FACTOR LOW MED HIGH V.HIGH SubTotal
idc group
Wind Zone (per NZS 3604) 0 0 1 2 0 land development consultants
Number of Stories 0 1 2 4 2
Roof/ Wall Intersection Design 0 1 3 5 5 Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Eaves Width 0 1 2 5 5 Auckland. New Zealand.
Envelope Complexity 0 1 3 6 1
p.o. box 91421 Victoria Street West. Auckland
Deck Design 0 2 4 6 0
phone: 09 970 1018
total risk score MEDIUM RISK 13 email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
H1 Calculation & Risk Matrix Lot
4,5,6

designed by drawn by checked by


JL FA JL
drawing no. date scale
E0-17 12/07/2021 1 : 1@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent

N
E2-02 documentation.

2 3. The contractor shall verify all dimensions on


Lot 5 Lot 4 E3-02 3 site before commencing the work. Use figured
dimensions in preference to scaled.
4 E2-02
10395 5 4. Construction work to be in accordance with
New Zealand Building code and standards.
3365 2020 4410 600
E2-03 5. All proprietary and manufactured items to be
255 3020 90 2020 90 4230 90 510 90 installed in accordance with manufacturers
specifications.

D3
6050 Building Consent
Deck less than 1m
8 above ground. exempt Revision Schedule
F14-06 from Building Consent. No Description Date
DN
90 1220 90 1500 90 510 90

5 4 3 2 1
90

300
Outline of floor above.

90
4/W0-01
1200

4/W0-02
C4c

760 X 1980
2700w X 2100h Entry

4/W0-03
C13

2200
2110
Dining
garage door 6 m²
9 m²
M2

1020 X 1980

90
1 1
5520

F
Garage

6600
W
E3-02 E3-02
4500

17 m²
710 X 1980
F4 Kitchen

3020

3200
F

Living C1
6200 15
14
UP
1
10 m²
7 m² idc group
2870

13 2
G6 12 3
M1 land development consultants
11 4 TV
140 760 90

14076090
5
10
4/W0-04
900

900
6 Unit 4, building D, 4 Pacific Rise,
C4c 9 8
7 Mt Wellington,
140

Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


Rangehood , extract
email: info@idcltd.co.nz
throguh wall.
305 3580 90 355 90 5885 90
project:
305 2970 90 965 90 965 90 4830 90 74 Jolson Road, Mt Wellington
305 2970 2200 4920
title:
Lot 4 Floor Plan - Level 0
2
E3-02
Lot 5 Window Schedule - Level 0 designed by drawn by checked by
JL FA JL
Mark Width Height Sill Height Head Height drawing no. date scale
E1-01 12/07/2021 1 : 100@ A3

4/W0-01 1600 2100 0 2100 Job No: 1528


Client: Owner
4/W0-02 2800 2100 0 2100 Contact: 027 872 2235
DP No: Lot 91 DP 45393
4/W0-03 1800 2100 0 2100 CT No: NA75B/471
COPYRIGHT
4/W0-04 1500 2100 0 2100 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2 2. Architectural drawings to be read as a set


E3-02
E2-02 and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
Lot 5 Lot 4 3 documentation.
4 E2-02
3. The contractor shall verify all dimensions on
5 site before commencing the work. Use figured
dimensions in preference to scaled.

E2-03 4. Construction work to be in accordance with


10395 New Zealand Building code and standards.

255 3020 90 520 90 3020 90 3220 90 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
specifications.
C4b 9
F14-07 C4a
Building Consent
4/W1-01 4/W1-02 4/W1-03 4/W1-04
90

90
Revision Schedule

1620 X 1980
No Description Date
2010

Bedroom 1 Bedroom 2

3020
C13
Master

4/W1-05
C6 10 m² 10 m²
140 760 90 1320 520 390 920 90

15 m²
1 1
5700

760 X 1980

6600
90 90 90

140 760 90 1320 90 1000 90


E3-02 E3-02
760 X 1980

760 X 1980
F4
1620 X 1980
710 X 1980 710 X 1980
C1
15
710 X 1980
Shower 14 1 W/r Ens.
7 4 m²
13 2
12 3 3 m² 3 m²
F14-06
10
11 4
5 idc group
4/W1-08 4/W1-06
900

6
9 8
7 land development consultants
D3 M2
4/W1-07
Unit 4, building D, 4 Pacific Rise,
D1 Mt Wellington,
Auckland. New Zealand.
Extent of racking
p.o. box 91421 Victoria Street West. Auckland
shown in red. 2000
min. headroom from phone: 09 970 1018

Level 1. 305 1960 90 920 90 960 100 960 90 2120 90 2620 90 email: info@idcltd.co.nz

305 2970 2200 4920


project:
74 Jolson Road, Mt Wellington

Lot 4 Window Schedule - Level 1 title:


2 Lot 4 Floor Plan - Level 1
Mark Width Height Sill Height Head Height
E3-02

designed by drawn by checked by


4/W1-01 1800 1800 400 2200
JL FA JL
4/W1-02 600 1800 400 2200 drawing no. date scale
4/W1-03 1000 1000 1000 2000 E1-02 12/07/2021 1 : 100@ A3
4/W1-04 2000 1000 1000 2000 Job No: 1528
4/W1-05 1800 400 1600 2000 Client: Owner
Contact: 027 872 2235
4/W1-06 600 1000 1000 2000 DP No: Lot 91 DP 45393
CT No: NA75B/471
4/W1-07 1000 2000 -800 1200 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
4/W1-08 1000 1000 1000 2000 REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.
E2-01 1
3. The contractor shall verify all dimensions on
E3-03
Lot 6 Lot 5 Lot 5 Lot 4 site before commencing the work. Use figured
2 dimensions in preference to scaled.
10380 4. Construction work to be in accordance with
6 New Zealand Building code and standards.
3365 1150 5610 255
5. All proprietary and manufactured items to be
E2-03 255 3020 90 1060 90 5610 255 installed in accordance with manufacturers
specifications.
255 3630 90
35590 5705 255
D3
Building Consent
lpg cylinder
Outline of against fence.
floor above. Revision Schedule
6050
No Description Date
M1
1720 90 410 90
90

5/W0-01

90 1200
DN
2700w X 2100h 5 4 3 2 1
C4c
Entry

760 X 1980
garage door 5/W0-02
2 m² C1
M2
90 1100 90

2 Dining Rangehood , extract 2

1020 X 1980
Garage Kitchen
5700

5520

throguh wall.
E3-01 E3-01
8 m²

6600
W
17 m² 7 m²
Deck less than 1m

710 X 1980

5220
F4 6200 above ground. exempt

F
15
14
UP
1
from Building Consent.
idc group
2870

13 2
G6 12 3 Living Optional, pack out land development consultants
5/W0-04 11 4 wall to align lining.
13 m²
140 760 90

5
10
900

1 2 3 4 5 6 Unit 4, building D, 4 Pacific Rise,


9 8
7 TV 5/W0-03 C4c Mt Wellington,
140

DN

90
Auckland. New Zealand.

1 2 3 4 5
p.o. box 91421 Victoria Street West. Auckland
6050
DN phone: 09 970 1018
email: info@idcltd.co.nz
6050 C13

project:
255 3020 90 965 90 955 4750 305
74 Jolson Road, Mt Wellington
3275 7155
title:

1 Lot 5 Floor Plan - Level 0


E3-03
Lot 5 Window Schedule - Level 0 designed by drawn by checked by
JL FA JL
Mark Width Height Sill Height Head Height drawing no. date scale
E1-03 12/07/2021 1 : 100@ A3

4/W0-01 1600 2100 0 2100 Job No: 1528


Client: Owner
4/W0-02 2800 2100 0 2100 Contact: 027 872 2235
DP No: Lot 91 DP 45393
4/W0-03 1800 2100 0 2100 CT No: NA75B/471
COPYRIGHT
4/W0-04 1500 2100 0 2100 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
E2-01 documentation.

Lot 6 Lot 5 Lot 5 Lot 4 3. The contractor shall verify all dimensions on
2 site before commencing the work. Use figured
dimensions in preference to scaled.
1
6 4. Construction work to be in accordance with
E3-03
New Zealand Building code and standards.
E2-03 5. All proprietary and manufactured items to be
10380 installed in accordance with manufacturers
specifications.
255 3010 100 3020 90 520 90 3040 255

Building Consent
C4b C13
Revision Schedule
5/W1-01 5/W1-02 5/W1-03 5/W1-04 No Description Date
90

90

90
1620 X 1980
C4a

2010
Bedroom 1 Bedroom 2
3500

C6 10 m² 10 m² Master

4110
90 1000 90 920 90
2 12 m² 2
5700

E3-01 E3-01

6600
760 X 1980
14076090 1320 90 520 90

F4 760 X 1980 760 X 1980


1620 X 1980
710 X 1980 710 X 1980

90
15
710 X 1980
Shower 14
13
1
2 idc group
4 m² 12

2220

2220
3
11 4 Bathroom land development consultants
5 W/r
10
5/W1-07 6 m²
900

6
9 8
7
4 m²
Unit 4, building D, 4 Pacific Rise,

90

90
Mt Wellington,
5/W1-06 5/W1-05 Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland


Extent of racking D1 D3 C1
phone: 09 970 1018
shown in red. 1290 email: info@idcltd.co.nz
min. headroom from
255 2010 90 920 90 2020 90 2740 90 1820 305
Level 1.
project:
3275 7155
74 Jolson Road, Mt Wellington

1
title:
E3-03 Lot 5 Window Schedule - Level 1
Lot 5 Floor Plan - Level 1
Mark Width Height Sill Height Head Height

designed by drawn by checked by


5/W1-01 1800 1800 400 2200 JL FA JL
5/W1-02 600 1800 400 2200 drawing no. date scale
E1-04 12/07/2021 1 : 100@ A3
5/W1-03 1000 1000 1000 2000
5/W1-04 2000 1000 1000 2000 Job No: 1528
Client: Owner
5/W1-05 1600 600 600 1200 Contact: 027 872 2235
DP No: Lot 91 DP 45393
5/W1-06 1000 2000 -800 1200 CT No: NA75B/471

5/W1-07 1000 900 800 1700 COPYRIGHT


THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

N
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.
Lot 6 Lot 5
E2-01 4. Construction work to be in accordance with
2 New Zealand Building code and standards.
E3-03
1 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
E2-04 2 9585 specifications.
1
5120 1100 3365
Building Consent
E2-04 90 4940 90 1100 90 3020 255
Revision Schedule
Deck less than 1m 1850 Outline of No Description Date
above ground. exempt floor above.
from Building Consent. deck
6/W0-01

90 1220 90 1320 90 410 90


90

90
TV 6/W0-02
Living 2700w X 2100h

760 X 1980
Entry

6/W0-04
C13 Dining 13 m²
2 m² Garage Door
7 m² M2

1020 X 1980
1 D3 1
Garage
5130

6050
5009

deck

5520

5700
5920

W
E3-01 E3-01

6300
17 m² F4

710 X 1980
C1
DN
6200 idc group

140 970 90 1790


5
4
Kitchen 15
G6 land development consultants
3
2
UP 14

1 8 m² 1 13
240 610

140 460 90
Unit 4, building D, 4 Pacific Rise,
F 2
12 6/W0-03 Mt Wellington,
3
140 90

Auckland. New Zealand.

600
5 6 7 8 9 10 11
380

4
Rangehood , extract DN p.o. box 91421 Victoria Street West. Auckland
5
throguh wall. 4
phone: 09 970 1018
3
2 email: info@idcltd.co.nz
1

M1
project:
90 5075 90 355 90 3630 255
74 Jolson Road, Mt Wellington
90 3965 90 1020 90 965 90 1080 90 1850 255

4055 3425 2105 title:


Lot 6 Floor Plan - Level 0

2
Lot 6 Window Schedule - Level 0 designed by drawn by checked by
E3-03 FA
JL JL
Mark Width Height Sill Height Head Height drawing no. date scale
E1-05 12/07/2021 1 : 100@ A3

6/W0-01 2000 2100 0 2100 Job No: 1528


Client: Owner
6/W0-02 900 2100 0 2100 Contact: 027 872 2235
DP No: Lot 91 DP 45393
6/W0-03 1500 2100 0 2100 CT No: NA75B/471

6/W0-04 2000 2100 0 2100 COPYRIGHT


THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

N
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
Lot 6 Lot 5 documentation.
E2-01 2
E3-03 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
1 dimensions in preference to scaled.
2
9585
E2-04
4. Construction work to be in accordance with
1 90 3020 90 3020 90 3020 255 New Zealand Building code and standards.
90 3020 90 2010 90 2090 90 1850 255 5. All proprietary and manufactured items to be
E2-04 installed in accordance with manufacturers
specifications.

C4a C13
Building Consent
6/W1-01 6/W1-02 6/W1-03 6/W1-04
90

90

90

90
Revision Schedule
C4b No Description Date

Bedroom 1 Bedroom 2
3020

3020

3020
6/W1-08
Master
3630

C6 9 m² 9 m²
1
13 m² 1

5700
5920

140 960 480 910 90 520 90

140 460 90 1800 90 520 90


90 1010 90 920 90 520 90

E3-01 E3-01

6300
760 X 1980 760 X 1980
1620 X 1980 1620 X 1980
F4

710 X 1980
710 X 1980
90

760 X 1980
8920 Shower
DN 15
140 240 90 2020

Ens. 1620 X 1980 14 3 m²


13
3 m²
3
12
idc group

600
5 6 7 8 9 10 11 6/W1-05
380

4
6/W1-07
land development consultants
6/W1-06

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Extent of racking D3 C1 Auckland. New Zealand.
shown in red. 1300
p.o. box 91421 Victoria Street West. Auckland
min. headroom from 90 1720 90 2155 90 3245 90 1850 255
Level 1. phone: 09 970 1018

4055 3425 2105 email: info@idcltd.co.nz

project:
2
74 Jolson Road, Mt Wellington
E3-03
Lot 6 Window Schedule - Level 1
title:
Mark Width Height Sill Height Head Height Lot 6 Floor Plan - Level 1

6/W1-01 2000 1000 1000 2000


designed by drawn by checked by
6/W1-02 1000 1000 1000 2000 JL FA JL
6/W1-03 600 1800 400 2200 drawing no. date scale
E1-06 12/07/2021 1 : 100@ A3
6/W1-04 1800 1800 400 2200
6/W1-05 600 900 800 1700 Job No: 1528
Client: Owner
6/W1-06 1800 1000 100 1100 Contact: 027 872 2235
DP No: Lot 91 DP 45393
6/W1-07 600 700 800 1500 CT No: NA75B/471

6/W1-08 1800 400 1600 2000 COPYRIGHT


THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for roof notes. general notes:
1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set

N
and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
2 1 2 documentation.
E3-03 E3-03 E3-02
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.
80Ø dp 50 S5 50 3 50 50 50 50 5. All proprietary and manufactured items to be
F14-02 80Ø dp installed in accordance with manufacturers
specifications.
50

50
6 Building Consent

10°
10°

F14-05

10°
Revision Schedule

10°
C4b (side) 10°
No Description Date

Inter-tenancy wall below.

Inter-tenancy wall below.


1 10° 2 1 2
1
E3-01 E3-01 E3-01 E3-01
E3-02
10°

10°
10°
S5

10°
4
80Ø dp
F14-03
45°

50

50

50
45°
50

45°
50
50

80Ø dp
50

50
80Ø dp 50 50
50 50 50 50
idc group
S4 80Ø dp 80Ø dp 80Ø dp S4 R2 80Ø dp
land development consultants
Section 1 C4c (side) S4
Unit 4, building D, 4 Pacific Rise,
Section 2 Mt Wellington,
Auckland. New Zealand.

Section 3 p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz
2 1 2
E3-03 E3-03 E3-02
project:
74 Jolson Road, Mt Wellington

title:
Lots 4,5,6 Roof Plan

designed by drawn by checked by


JL FA JL
drawing no. date scale
E1-07 12/07/2021 1 : 100@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
2 Refer to Key Notes for Elevation notes. general notes:

Lot 5 Lot 6 E3-03 1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
R2
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
6-S1 Alternative solutions to comply with The
C4b building code.
Level R

82
11365 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
and structural drawings, calculations,
6/W1-02 6/W1-01 specifications and all other consent
C13
6/W1-04 C4a documentation.
Level 1 6/W1-03
3. The contractor shall verify all dimensions on
8920 site before commencing the work. Use figured
dimensions in preference to scaled.
Non-structural window C1
shroud to be designed and 4. Construction work to be in accordance with
installed by others. New Zealand Building code and standards.

Level 0 6/W0-02 6/W0-01 D3 5. All proprietary and manufactured items to be


installed in accordance with manufacturers
6200 specifications.

5370
Opening in foundation to Building Consent
allow for flood water flow. C10
Revision Schedule
No Description Date

1 Lot 6 Elevation - West


E1-05 1 : 100

1
Lot 4 Lot 5 E3-03 Lot 5 Lot 6
R2
idc group
land development consultants

C4b (side) C4b Unit 4, building D, 4 Pacific Rise,


Level R Mt Wellington,
Auckland. New Zealand.

11365 p.o. box 91421 Victoria Street West. Auckland


C13
phone: 09 970 1018
5/W1-04 5/W1-03 email: info@idcltd.co.nz

C4a 5/W1-01 Non-structural window


Level 1 5/W1-02 project:
shroud to be designed and
8920 installed by others. 74 Jolson Road, Mt Wellington
C1
5/W0-02
C4c (side) title:

D3 Lots 4,5,6 Elevations


Level 0 5/W0-01
6200
M1 designed by drawn by checked by
JL FA JL
drawing no. date scale
C10 E2-01 12/07/2021 1 : 100@ A3

Job No: 1528

2 Lot 5 Elevation - West Client: Owner


Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
E1-03 1 : 100 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:

1. All work to comply with NZ Building Code,


2 Building Regulations1992, Building Act 2004
E3-02 Lot 4 Lot 5 and amendments and all T.A requirements.
New Zealand Standards, Compliance
R2 documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

C4b (side) 2. Architectural drawings to be read as a set


Level R

212
and in conjunction with relevant architectural
11365 and structural drawings, calculations,
6-N1
C13 specifications and all other consent
documentation.
4/W1-04 4/W1-03
C4a 3. The contractor shall verify all dimensions on
4/W1-01 C4b site before commencing the work. Use figured
Level 1 4/W1-02 dimensions in preference to scaled.
8920
C1 Non-structural window 4. Construction work to be in accordance with
6840 shroud to be designed and New Zealand Building code and standards.
installed by others.
5. All proprietary and manufactured items to be
installed in accordance with manufacturers
Level 0 S7 4/W0-02 4/W0-01 C4c (side) specifications.

6200
Building Consent

Existing ground line Opening in foundation to C10


Revision Schedule
No Description Date
allow for flood water flow.

3 Lot 4 Elevation - West


E1-01 1 : 100
1
E3-02

R2 idc group
land development consultants

C4b
Level R Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
11365
260

p.o. box 91421 Victoria Street West. Auckland

4/W1-05
4-E4 phone: 09 970 1018
C1 email: info@idcltd.co.nz

Level 1
project:
8920
74 Jolson Road, Mt Wellington
M1

title:
C13
Lots 4,5,6 Elevations
Level 0 4/W0-03
6200 6460
designed by drawn by checked by
JL FA JL
drawing no. date scale
E2-02 12/07/2021 1 : 100@ A3

4 Lot 4 Elevation - North Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
E1-01 1 : 100 CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:

2 1. All work to comply with NZ Building Code,


Lot 5 Lot 4 E3-02 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
R2 Alternative solutions to comply with The
building code.

Level R

212
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
11365 6-N1 and structural drawings, calculations,
C13 specifications and all other consent
4/W1-08 4/W1-06 documentation.
C1 3. The contractor shall verify all dimensions on
Level 1 site before commencing the work. Use figured
8920 dimensions in preference to scaled.
4/W1-07
S7 4. Construction work to be in accordance with
New Zealand Building code and standards.

5. All proprietary and manufactured items to be


Level 0 4/W0-04 6840 installed in accordance with manufacturers
specifications.
6200

Building Consent
Opening in foundation to C10
allow for flood water flow. Revision Schedule
No Description Date

5 Lot 4 Elevation - East


E1-01 1 : 100

1
Lot 6 Lot 5 E3-03 Lot 5 Lot 4

idc group
land development consultants

Level R R2
Unit 4, building D, 4 Pacific Rise,
11365 Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

5/W1-07
5/W1-05 C13 phone: 09 970 1018
email: info@idcltd.co.nz
Level 1
8920 C1 project:
5/W1-06
5/W0-04 5/W0-03 74 Jolson Road, Mt Wellington

title:
Level 0 D3
Lots 4,5,6 Elevations
6200

designed by drawn by checked by


JL FA JL
Opening in foundation to C10 drawing no. date scale
allow for flood water flow.
E2-03 12/07/2021 1 : 100@ A3

Job No: 1528

6 Lot 5 Elevation - East Client: Owner


Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
E1-03 1 : 100 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Elevation notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
2 Lot 6 Lot 5 and amendments and all T.A requirements.
New Zealand Standards, Compliance
E3-03
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

R2 2. Architectural drawings to be read as a set


Level R and in conjunction with relevant architectural

82
6-S1 and structural drawings, calculations,
11365
specifications and all other consent
documentation.
C13
6/W1-07 6/W1-05 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
Level 1 6/W1-06 dimensions in preference to scaled.
8920 C1
4. Construction work to be in accordance with
New Zealand Building code and standards.

M1 5. All proprietary and manufactured items to be


installed in accordance with manufacturers
D3 specifications.
Level 0 6/W0-03
6200
Building Consent
5370 Opening in foundation to
C10 Revision Schedule
allow for flood water flow.
No Description Date

1 Lot 6 Elevation - East


E1-05 1
1 : 100 E3-01

R2
idc group
land development consultants
C4b
Level R
Unit 4, building D, 4 Pacific Rise,
11365 Mt Wellington,

10 30
Auckland. New Zealand.

6/W1-08 6-E1 p.o. box 91421 Victoria Street West. Auckland

C4a 6-E2 phone: 09 970 1018

Level 1 email: info@idcltd.co.nz

8920
project:
6/W0-04
C1 74 Jolson Road, Mt Wellington
D3

5660 title:
Level 0 C10
Lots 4,5,6 Elevations
6200
5680
designed by drawn by checked by
JL FA JL
drawing no. date scale
E2-04 12/07/2021 1 : 100@ A3

Job No: 1528

2 Lot 6 Elevation - South Client: Owner


Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471

E1-05 1 : 100 COPYRIGHT


THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
Lot 4 Lot 5 Lot 5 Lot 6 building code.

2. Architectural drawings to be read as a set


Level R and in conjunction with relevant architectural
and structural drawings, calculations,
11365 specifications and all other consent
Level 1 documentation.

8920 3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
Level 0 dimensions in preference to scaled.

6200 4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
1 4,5,6_West specifications.

1 : 200 Building Consent

Revision Schedule
No Description Date

Lot 6 Lot 5 Lot 5 Lot 4

Level R
idc group
11365 land development consultants

Level 1
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
8920 Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland


Level 0
phone: 09 970 1018
6200 email: info@idcltd.co.nz

project:

2 4,5,6_East 74 Jolson Road, Mt Wellington

1 : 200 title:
Lot 4,5,6 Overall Elevation

designed by drawn by checked by


JL FA JL
drawing no. date scale
E2-05 12/07/2021 1 : 200@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Section notes. general notes:

1. All work to comply with NZ Building Code,


2 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Lot 5 Lot 6 E3-03
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
5 R2 Alternative solutions to comply with The
F14-04 building code.
G3
S5 2. Architectural drawings to be read as a set
Level R and in conjunction with relevant architectural
and structural drawings, calculations,
11365 specifications and all other consent
S6 C13 documentation.

2400
Bedroom 2 Bedroom 1 Master
3. The contractor shall verify all dimensions on
F4 site before commencing the work. Use figured
Level 1 S3 dimensions in preference to scaled.
8920 4. Construction work to be in accordance with
New Zealand Building code and standards.
G5 C1
2

2400
Garage Living Dining 5. All proprietary and manufactured items to be
F14-01 Not included termal installed in accordance with manufacturers
S1 envalope. Insulation to all
specifications.
Level 0 walls and ceilings.

6200 C10
1 S2 Building Consent
F14-01
Revision Schedule
No Description Date

1 Lot 6 Section 1
E1-05 1 : 100

Lot 4 Lot 5 Lot 5 Lot 6


1
E3-03 R2
G3 idc group
land development consultants
Level R S5
11365 Unit 4, building D, 4 Pacific Rise,
G5 S6 Mt Wellington,
Auckland. New Zealand.
2400

Master Bedroom 2 Bedroom 1


p.o. box 91421 Victoria Street West. Auckland

Level 1 S3 phone: 09 970 1018


email: info@idcltd.co.nz

8920
project:
Kitchen Dining Garage F4
2400

Not included termal 74 Jolson Road, Mt Wellington


envalope. Insulation to all
walls and ceilings. S1
Level 0 title:
6200 Lots 4,5,6 Sections
S2 C10

designed by drawn by checked by


JL FA JL

2 Lot 5 Section 1 drawing no.


E3-01
date
12/07/2021
scale
1 : 100@ A3

E1-03 1 : 100 Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Section notes. general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
2
and amendments and all T.A requirements.
E3-02 Lot 4 Lot 5 New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.
R2 S5
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
Level R
and structural drawings, calculations,
11365 F4 specifications and all other consent
C13 Master documentation.
Bedroom 2 Bedroom 1 S6

2400
3. The contractor shall verify all dimensions on
C1 site before commencing the work. Use figured
Level 1 S3 dimensions in preference to scaled.

8920 4. Construction work to be in accordance with


New Zealand Building code and standards.
G5
G3

2400
Kitchen Living Garage 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
S1 specifications.
Level 0 S7
6200
S2 C10 Building Consent
S1
Revision Schedule
No Description Date

1 Lot 4 Section 1
E1-01 1 : 100

1
E3-02
4
F12-02
idc group
R2 land development consultants

S5
Level R Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
11365 S4 Auckland. New Zealand.

C4b p.o. box 91421 Victoria Street West. Auckland


2400

G3 Bedroom 2 phone: 09 970 1018


1596

email: info@idcltd.co.nz

Level 1
8920 D3 project:
G4 74 Jolson Road, Mt Wellington
C1
2400

Living Entry
C13 title:

Level 0 Lots 4,5,6 Sections


S2
6200
designed by drawn by checked by
S7 C10 FA
JL JL
drawing no. date scale

2 Lot 4 Section 2 E3-02

Job No: 1528


12/07/2021 1 : 100@ A3

Client: Owner
E1-01 1 : 100 Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Refer to Key Notes for Section notes. general notes:
2
1. All work to comply with NZ Building Code,
5 E3-01 Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
F12-03
New Zealand Standards, Compliance
R2 documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
S5 building code.
Level R
11365 S4 2. Architectural drawings to be read as a set
G5 and in conjunction with relevant architectural
Bedroom 2 and structural drawings, calculations,

2400
G3 specifications and all other consent

1296
C4a documentation.
Level 1
D3 3. The contractor shall verify all dimensions on
8920 site before commencing the work. Use figured
G4 dimensions in preference to scaled.
C1

2400
Living Dining 4. Construction work to be in accordance with
C13 New Zealand Building code and standards.

Level 0 5. All proprietary and manufactured items to be


D3
S1 installed in accordance with manufacturers
6200 specifications.

C10
Building Consent

Revision Schedule
No Description Date

1 Lot 5 Section 2
E1-03 1 : 100 1
E3-01

6
F12-03
R2
S5
Level R
idc group
land development consultants
11365 S4
C4a
Bedroom 1
2400

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,

1346
Auckland. New Zealand.

D3
Level 1 p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


8920
email: info@idcltd.co.nz
G5 C1
Living
2400

project:
G3
74 Jolson Road, Mt Wellington
Level 0
S1
6200 title:
C10 Lots 4,5,6 Sections

designed by drawn by checked by


JL FA JL
drawing no. date scale

2 Lot 6 Section 2 E3-03 12/07/2021 1 : 100@ A3

Job No: 1528


E1-05 1 : 100 Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
GAF ASTM-D226 self-adhesive heavy duty underlay.
1. All work to comply with NZ Building Code,
GAF Asphalt Shingle Roof Cladding. Installation Building Regulations1992, Building Act 2004
to manufacturer's requirements. Profile and and amendments and all T.A requirements.
colour to be selected by client. New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
15mm plywood substrate. Treatment 75 Alternative solutions to comply with The
to manufacturer's requirements. 50 r building code.
cove
Nog between top chord. nd
exte 2. Architectural drawings to be read as a set
Shingle starter roll 180mm and in conjunction with relevant architectural

air gap
and structural drawings, calculations,

10
50 fla
or starter strip with adhesive
specifications and all other consent

dow
bead incorporated.

shing
documentation.

nturn
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
dimensions in preference to scaled.
Selected gutter. Selected R3.2 ceiling
4. Construction work to be in accordance with
insulation. New Zealand Building code and standards.
Metal eave drip edge flashing.

35
H3.2 180x19 timber fascia, 10mm Air vent gap 5. All proprietary and manufactured items to be
finish to be selected by client. installed in accordance with manufacturers
specifications.
Selected wall underlay
R2.2 selected insulation
Bevelback timber weatherboard on H3.1
cavity battens. Installation to NZBC E2/AS1 Building Consent
H3.1 50x20 timber batten.
& manufacturer's requirement. Size and
finishes to be selected by client. Revision Schedule
No Description Date

1 Bevelback Wbd/Shingle Eave_Clipped


B3-01 1:5

Selected bevelback timber weatherboard. Selected interior wall lining


Size and finish to be selected by client. Selected R2.2 insulation
Installation to manufacturer's requirements.
M12 bolt and 50x50x3mm washers at
idc group
H3.1 50x20 timber batten. 0.6m crs. max. refer to NZS:3604 land development consultants

Selected wall underlay DPC


Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Proprietary uPVC vent strip Selected floor lining. Auckland. New Zealand.
min. 15mm from bottom of
p.o. box 91421 Victoria Street West. Auckland
cladding. With 1000mm² of

120mm min for masonry header block


opening per lineal meter. mitre phone: 09 970 1018
cover

225mm min. to unpaved ground


50

150mm min. to paved ground

email: info@idcltd.co.nz
at corners. Keep clear of debris
90mm min for in-situ concrete
15

50
project:
175mm min. to unpaved surface

100mm min. to paved surface

74 Jolson Road, Mt Wellington

title:
Construction Details

designed by drawn by checked by


Foundation design as per FA
Selected concrete slab JL JL
Engineer's specification. drawing no. date scale
underlay. Installation to
F10-01 12/07/2021 1 : 5@ A3
Manufacturer's requirements.

Bevelback Wbd Footing


Job No: 1528
Client: Owner
2 Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
B3-01 1:5 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
GAF ASTM-D226 self-adhesive heavy duty underlay.

GAF Asphalt Shingle Roof Cladding. Installation Proprietary GAF ASTM-D226 self- GAF Asphalt Shingle Roof 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
to manufacturer's requirements. Profile and adhesive heavy duty underlay. Cladding. Installation to and amendments and all T.A requirements.
colour to be selected by client. manufacturer's requirements. New Zealand Standards, Compliance
15mm plywood substrate. As per Profile and colour to be documents, NZS3604 2011 and amendments.
15mm plywood substrate. Treatment shingle manufacturere's requirements. selected by client. Alternative solutions to comply with The
to manufacturer's requirements. 75 building code.
50 r Refer to truss designers drawings
Nog between top chord. cove Shingles to be laid in 2. Architectural drawings to be read as a set
nd for truss spacing & specification.
exte contiuous sequence and in conjunction with relevant architectural
Shingle starter roll 180mm and structural drawings, calculations,

air gap
Joist hanger to support roof trusses. across joint.
or starter strip with adhesive specifications and all other consent

10
50 fla
documentation.
dow
bead incorporated.
Selected R3.2 ceiling insulation.

shing
nturn
Selected gutter. 3. The contractor shall verify all dimensions on
70x35 ceiling battens. site before commencing the work. Use figured
dimensions in preference to scaled.
Metal eave drip edge flashing.
Selected interior ceiling lining. 4. Construction work to be in accordance with
H3.2 180x19 timber fascia,
New Zealand Building code and standards.
finish to be selected by client. Joist hanger to support roof rafters.
Selected R3.2 ceiling
35

5. All proprietary and manufactured items to be


insulation.
Sealant on sealed face of cladding R3.2 skillion ceiling insulation installed in accordance with manufacturers
specifications.
James Hardie Cladding with 10mm Air vent gap Ceiling battens / Joists to suit
selected coating. Installation to
Building Consent
manufacturer's requirements. Selected wall underlay Refer to engineer's drawings
for rafter specification.
Revision Schedule
Proprietary CLD structural batten. If timber R2.2 selected insulation
No Description Date
batten is used, refer to installation manual
for alternative fixing layout. 4 Shingle Roof Pitch Change
B3-01 1:5
3 JH Cladding/Shingle Eave_Clipped
B2-01 1:5

Folded aluminum eaves GAF Asphalt Shingle Roof Cladding on


flashing. End turned down to 130 GAF ASTM-D226 self-adhesive heavy duty idc group
suit roofing profile. Flashing underlay on 15mm plywood substrate.
land development consultants
to E2/AS1 compliance. Installation to manufacturer's requirements.

Unit 4, building D, 4 Pacific Rise,

50
Mt Wellington,
H3.2 timber fascia, finish to be Auckland. New Zealand.
selected by client.
p.o. box 91421 Victoria Street West. Auckland

50
phone: 09 970 1018
email: info@idcltd.co.nz

Eave flashing with kickout. provide 50


min. 50mm cover to cladding. 50mm project:
return behnd soffit lining. 74 Jolson Road, Mt Wellington

James Hardie Cladding with


selected wall underlay title:
selected coating. Installation to
manufacturer's requirements. Construction Details

Proprietary CLD structural batten.


designed by drawn by checked by
If timber batten is used, refer to
JL FA JL
installation manual for alternative drawing no. date scale
fixing layout. F10-02 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner

5 JH Cladding/Shingle Reverse Eave_Clipped Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471

B3-01 1:5
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
As specified by general notes:

Roof truss designer GAF Asphalt Shingle Roof Cladding on 1. All work to comply with NZ Building Code,
Al flashing. 76mm min. width. Building Regulations1992, Building Act 2004
10 76mm min. GAF ASTM-D226 self-adhesive heavy duty
50mm downturn with 10mm kickout and amendments and all T.A requirements.
underlay on 15mm plywood substrate.
New Zealand Standards, Compliance
End shingle to be turned over Installation to manufacturer's requirements. documents, NZS3604 2011 and amendments.
flashing with min. 10mm overhang Alternative solutions to comply with The
and fixed with roofing cement. building code.

50
See product manual.
2. Architectural drawings to be read as a set
90x45 H1.2 fly rafter. and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
H3.2 timber fascia, finish documentation.

35
to be selected by client.
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
Wall underlay to carry dimensions in preference to scaled.
H3.1 timber soffit moulding over top plate.
4. Construction work to be in accordance with
New Zealand Building code and standards.
H3.1 50x20 timber batten. Racking top plate wall. Standard truss refer to roof
truss designers Specifications. 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
Selected wall underlay specifications.

Selected bevelback timber weatherboard. Building Consent


Size and finish to be selected by client.
Installation to manufacturer's requirements.
Revision Schedule
No Description Date

6 Bevelback Wbd/Shingle Barge_Clipped


B3-01 1:5
As specified by

Roof truss designer GAF Asphalt Shingle Roof Cladding on


Al flashing. 76mm min. width.
10 76mm min. GAF ASTM-D226 self-adhesive heavy duty
50mm downturn with 10mm kickout
underlay on 15mm plywood substrate.
Installation to manufacturer's requirements.
idc group
End shingle to be turned over
land development consultants
flashing with min. 10mm overhang
and fixed with roofing cement.
50

See product manual. Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.
90x45 H1.2 fly rafter.
p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


H3.2 timber fascia, finish
35

email: info@idcltd.co.nz
to be selected by client.
Wall underlay to carry
over top plate. project:
H3.1 timber soffit moulding
74 Jolson Road, Mt Wellington

James Hardie Cladding with selected coating. title:


Installation to manufacturer's requirements. Selected wall underlay. Standard truss refer to roof
truss designers Specifications. Construction Details

Proprietary CLD structural batten. If timber Racking top plate wall.


designed by drawn by checked by
batten is used, refer to installation manual FA
JL JL
for alternative fixing layout. drawing no. date scale
F10-03 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner

7 JH Cladding/Shingle Barge_Clipped Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
B2-01 1:5 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.
Selected wall lining.
3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
Selected wall underlay
Selected floor lining. inside dimensions in preference to scaled.

Floor board. Selected R2.2 wall insulation. 4. Construction work to be in accordance with
New Zealand Building code and standards.
James Hardie Cladding.
Installation to manufacturer's 5. All proprietary and manufactured items to be
requirements. installed in accordance with manufacturers
specifications.
Proprietary CLD structural
Selected R1.6 floor insulation. batten. If timber batten is used,
Refer to Engineer's Drawings Building Consent
refer to installation manual for
for mid floor structure details. alternative fixing layout.
Revision Schedule
No Description Date
2/240x45 H3.2 boundary joist.

Wall underlay to carry over top plate. Wire mesh to support insulation.

Selected ceiling lining. Proprietary Cavity base closure with


perforated base and min. 75mm upstand.
Positioned to give 15mm min drip edge
to cladding.

H3.1 timber soffit moulding


refer to floor plans
Selected wall lining. Continuous bead of sealant
for overhang
Selected R2.2 wall insulation.
idc group
outside 70x35 soffit batten at 400crs. max. land development consultants

Selected Wall Underlay fixed to underside of Soffit joists.


Unit 4, building D, 4 Pacific Rise,
4.5mm hardiflex soffit, paint finish. Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

8 JH Cladding/Bevel Wbd Mid-floor Soffit project:


C2-01 1:5 74 Jolson Road, Mt Wellington

title:
Construction Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F10-04 22/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
James Hardie Cladding. Installation to 1. All work to comply with NZ Building Code,
manufacturer's requirements. Building Regulations1992, Building Act 2004
Selected interior and amendments and all T.A requirements.
Proprietary CLD structural batten. If timber batten is used, New Zealand Standards, Compliance
refer to installation manual for alternative fixing layout. wall lining. documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
Selected building paper building code.
Additional blocking to provide
Proprietary Cavity base closure with perforated continuous support for 2. Architectural drawings to be read as a set
baseand min. 75mm upstand. Positioned to give underlay and flashing upstand. and in conjunction with relevant architectural
15mm min drip edge to cladding. and structural drawings, calculations,

flashing
outside inside specifications and all other consent

150
Coating to continue under bottom edge documentation.

50 15
Butynol apron flashing min. 150mm upstand with 3. The contractor shall verify all dimensions on
10mm hem. 150mm min. coverage. Flashing Roof underlay carried up
site before commencing the work. Use figured
installed as per GAF ELK requirements. face of framing behind dimensions in preference to scaled.
upstand flashing and over
GAF Asphalt Shingle Roof Cladding. wall underlay. 150mm min. 4. Construction work to be in accordance with
150
Installation to manufacturer's requirements. underlay upstand. New Zealand Building code and standards.
Profile and colour to be selected by client. coverage 5. All proprietary and manufactured items to be
Selected R2.2 installed in accordance with manufacturers
15mm plywood substrate. Treatment wall insulation. specifications.
to manufacturer's requirements.
GAF ASTM-D226 self-adhesive
Building Consent
heavy duty underlay.

Refer to truss designers drawings Revision Schedule


for truss spacing & specification. No Description Date

9 JH Cladding/Shingle Apron_Parallel
B2-02 1:5
James Hardie Cladding. Installation to
manufacturer's requirements.
Proprietary CLD structural batten. If timber batten is used, Selected interior
refer to installation manual for alternative fixing layout. wall lining. idc group
Selected building paper land development consultants
Additional blocking to provide
Proprietary Cavity base closure with perforated continuous support for
baseand min. 75mm upstand. Positioned to give underlay and flashing upstand. Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
15mm min drip edge to cladding.

flashing
Auckland. New Zealand.
outside inside

150
p.o. box 91421 Victoria Street West. Auckland
Coating to continue under bottom edge

35 15
phone: 09 970 1018
Butynol apron flashing min. 150mm upstand with email: info@idcltd.co.nz
10mm hem. 150mm min. coverage. Flashing Roof underlay carried up
installed as per GAF ELK requirements. face of framing behind
upstand flashing and over project:

GAF Asphalt Shingle Roof Cladding. Installation wall underlay. 150mm min. 74 Jolson Road, Mt Wellington
to manufacturer's requirements. Profile and 150 underlay upstand.
colour to be selected by client.
age
cover
title:
Selected R2.2
15mm plywood substrate. Treatment wall insulation. Construction Details
to manufacturer's requirements.
GAF ASTM-D226 self-adhesive designed by drawn by checked by
heavy duty underlay. JL FA JL
drawing no. date scale
Refer to truss designers drawings F10-05 12/07/2021 1 : 5@ A3
for truss spacing & specification.
Job No: 1528
Client: Owner

10 Axon Panel/Shingle Apron_Transverse Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
B2-01 1:5 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
Selected wall lining. documentation.

Selected wall underlay 3. The contractor shall verify all dimensions on


Selected floor lining. inside site before commencing the work. Use figured
dimensions in preference to scaled.
Floor board. Selected R2.2 wall insulation.
4. Construction work to be in accordance with
H3.1 50x20 timber batten. New Zealand Building code and standards.

Selected bevelback timber 5. All proprietary and manufactured items to be


weatherboard. Size and finish to installed in accordance with manufacturers
be selected by client. Installation specifications.
to manufacturer's requirements.
Refer to Engineer's Drawings
for mid floor structure details. Building Consent
Selected R1.6 floor insulation.

2/240x45 H3.2 boundary joist. Revision Schedule


No Description Date

Wall underlay to carry over top plate. Wire mesh to support insulation.

Selected ceiling lining. Proprietary Cavity base closure with


perforated base and min. 75mm upstand.
Positioned to give 15mm min drip edge
to cladding.

15
H3.1 timber soffit moulding
refer to floor plans
Selected wall lining. Continuous bead of sealant
for overhang
Selected R2.2 wall insulation.
70x35 soffit batten at 400crs. max.
idc group
outside
Selected Wall Underlay fixed to underside of Soffit joists. land development consultants

4.5mm hardiflex soffit, paint finish. Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018

11 Bevelback Wbd Mid-Floor Soffit email: info@idcltd.co.nz

B2-02 1:5 project:


74 Jolson Road, Mt Wellington

title:
Construction Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F10-06 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
Ridge shingle fixed over Leave min 30mm ventilation gap general notes:
Butynol or upstand
ventilation capping with 'Henry' in substrate to apex of ridge
flashings installed as per
HE208R - Rubberised Wet Patch Wall penetrating roof. 1. All work to comply with NZ Building Code,
manufacturers specs with Building Regulations1992, Building Act 2004
Roof Cement' as per manuf's specs Cladding lapped over
shingles laid over and amendments and all T.A requirements.
30 ASTM D226 Heavy duty upstand. New Zealand Standards, Compliance
Proprietary Corflute 'Rigid Roll' or Bitumen based roofing underlay 1. Provide min 150mm documents, NZS3604 2011 and amendments.
30
Cobra ventilation system to ridge. over plywood substrate upstand to flashing Proprietary PVC stop Alternative solutions to comply with The
Fix with clouts to substrate end or steel discharge building code.
2. Provide min into spouting.
Provide solid nogging between 150mm overlap 2. Architectural drawings to be read as a set
GAF asphalt shingles fixed trusses / rafters 60mm down and in conjunction with relevant architectural
and structural drawings, calculations,
to substrate with galvanized from apex to allow for fixing of specifications and all other consent
or hot dip galve clouts substrate and shingles documentation.
Gutter
3. The contractor shall verify all dimensions on
Shingles to provide approx Ply and underlay site before commencing the work. Use figured
15mm min. thick, grade DD or
300mm overlapping cover. dimensions in preference to scaled.
better plywood complying with
Ensure 3 layers of shingles Metal flashing
A/NZS 2269. Untreated for
to all roof areas 4. Construction work to be in accordance with
ventilated truss roof cavities New Zealand Building code and standards.
above 12°. H3 treated for all
Timber trusses / rafters closed cavity roofs, skillion 5. All proprietary and manufactured items to be
roofs, and roofs 12° and below. installed in accordance with manufacturers
specifications.
Raised ripples
IN ALL SITUATIONS LAY SHINGLES SO
LAPS FACE DOWN TO THE DIRECTION OF Building Consent
PREVAILING WIND
Revision Schedule
125mm EXPOSURE
START HERE No Description Date

PROPRIETRY PVC STOP


END ONE PIECE FLASHING

START HERE 125mm 13 Typical Shingle Roof Kickout


EXPOSURE
1 : 10
idc group
25m

mm land development consultants


m

127
Stainless Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Steel Auckland. New Zealand.
fastener Lay shingles across
mm
155
p.o. box 91421 Victoria Street West. Auckland
Valley from smaller
roof to larger D226+ roofing underlay laid over phone: 09 970 1018

15mm construction plywood email: info@idcltd.co.nz

substrate

12 Typical Shingle Roof Ridge Detail Trim shingles to form


project:
74 Jolson Road, Mt Wellington
C1-03 clean lines
nts
Stainless steel or HDG title:
Fascia board clouts to fix GAF shingles to Construction Details
with gutter as roof in accordance with
per plans manufacturers specifications

of valley
designed by drawn by checked by
Center JL FA JL
line drawing no. date scale
F10-07 12/07/2021 1 : 10@ A3
Overlapping shingles to be no
Job No: 1528
closer than 50mm to centre line Client: Owner

14 Typical Shingle Valley Detail of valley Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
1 : 10 THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

Stack/vent pipe with venting D-226+ roofing underlay over 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
cap carried through shingles plywood substrate to be laid so
and amendments and all T.A requirements.
and substrate. Refer to plan as to spill over top of anti- New Zealand Standards, Compliance
for placement and sizing capillary hem documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
'GAF' Asphalt Shingles building code.
laid by approved
applicator with min 3 Flashing to fixed under 2. Architectural drawings to be read as a set
layers of coverage to the asphalt shingles. Fold and in conjunction with relevant architectural
top edge to form min Square of flexible and structural drawings, calculations,
entire roof area Building underlay
flashing tape to a min. specifications and all other consent
10mm anti capillary hem carefully cut to
Dektite 'Nu-Lead' or documentation.
suit pipe of 100mm outside of
'Aluminium' EPDM pipe, ensure seal with 3. The contractor shall verify all dimensions on
flashing around pipe pipe bandage site before commencing the work. Use figured
penetration Folded edges of the boot
dimensions in preference to scaled.
flashing back onto itself to Weatherboard over
Flashign to be laid so create a secondary water flashing tape, 4. Construction work to be in accordance with
as to discharge over barrier carefully cut to suit New Zealand Building code and standards.
lower shingles
Integrated flashing boot pipe and seal with 5. All proprietary and manufactured items to be
Dress lower edge of flashing over flexible sealant Flexible flashing tape installed in accordance with manufacturers
shingles and secure with Henry Continuous bead of 'Holdfast bandage min 25mm specifications.
'Rubberised wet patch roof Blackjack' roof cement on wide all round pipe.
cement' as per manufacturers flashing and concealed half of
specs Building Consent
shingle

Revision Schedule

15 Typical Shingle Roof Penetration 16 Typical Bevelback Wbd Penetration No Description Date

1:5 1 : 10

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

Building underlay Square of flexible


p.o. box 91421 Victoria Street West. Auckland
carefully cut to flashing tape to a
suit pipe min of 100mm phone: 09 970 1018
email: info@idcltd.co.nz
outside of pipe,
ensure seal with
pipe bandage project:
JH Panel over 74 Jolson Road, Mt Wellington
flashing tape,
carefully cut to suit
pipe and seal with title:
flexible sealant Flexible flashing tape Construction Details
bandage min 25mm
wide all round pipe.
designed by drawn by checked by
JL FA JL

17 Typical James Hardie Panel Penetration drawing no.


F10-08
date scale
12/07/2021 As indicated@ A3

1 : 10 Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:
50 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Tight mitred joint to New Zealand Standards, Compliance
50
documents, NZS3604 2011 and amendments.
horizontal weatherboards
Alternative solutions to comply with The

50
building code.
50x50mm min. corner
flashing over building paper 2. Architectural drawings to be read as a set
with hem down each edge. and in conjunction with relevant architectural
and structural drawings, calculations,

50
specifications and all other consent
H3.1 50x20 timber batten. Provide
Tight mitred joint to documentation.
solid support for flashing hem.
horizontal weatherboards
3. The contractor shall verify all dimensions on
Selected bevelback timber 50x50mm min. corner site before commencing the work. Use figured
weatherboard. Size and finish to flashing over building paper dimensions in preference to scaled.
be selected by client. Installation with hem down each edge.
4. Construction work to be in accordance with
to manufacturer's requirements.
Selected wall underlay New Zealand Building code and standards.
H3.1 50x20 timber batten. Provide
Selected wall underlay solid support for flashing hem. 5. All proprietary and manufactured items to be
Selected R2.2 insulation installed in accordance with manufacturers
Selected R2.2 insulation Selected bevelback timber specifications.
Selected interior wall lining weatherboard. Size and finish to
Selected interior wall lining. be selected by client. Installation to
manufacturer's requirements. Building Consent

Revision Schedule
No Description Date

18 Bevelback Wbd Corner_Ext 19 Bevelback Wbd Corner_Int


B1-01 1:5 B1-01 1:5

50
idc group
Edge of sheet to be sealed. land development consultants
50

Proprietary alu. 50x50mm boxed


Unit 4, building D, 4 Pacific Rise,
corner flashing. Installation to Edge of sheet to be sealed. Mt Wellington,
Auckland. New Zealand.
manufacture's requirements.
p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


Proprietary CLD structural Selected R2.2 wall insulation 50x50 James Hardie email: info@idcltd.co.nz
batten. If timber batten is used, under-flashing.
refer to installation manual for
alternative fixing layout. Proprietary CLD structural project:
Selected wall underlay batten. If timber batten is used, 74 Jolson Road, Mt Wellington
Selected wall underlay refer to installation manual for
Selected interior wall lining. alternative fixing layout.
Selected R2.2 wall insulation title:
James Hardie Cladding with James Hardie Cladding with
selecting coating. Installation to Selected interior wall lining. Construction Details
selecting coating. Installation to
manufacturer's requirements. manufacturer's requirements.
designed by drawn by checked by
JL FA JL

JH Cladding Corner_Ext JH Cladding Corner_Int


drawing no. date scale
F10-09 12/07/2021 1 : 5@ A3
20 21
B1-02 1:5 B1-02 1:5 Job No: 1528
Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
50 general notes:

H3.1 50x20 timber cavity batten. 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
H3.1 Scriber cut to fit. Sealant joint with backing rod. and amendments and all T.A requirements.
outside New Zealand Standards, Compliance
Edge of sheet to be sealed. 75x3.15mm jolt head nails Site cut edges to be primed documents, NZS3604 2011 and amendments.

50
pre-drill with 3mm prior to installation. Alternative solutions to comply with The
6-8mm max. building code.
Proprietary alu. 50x50mm boxed uPVC or metal flashing 6x3.15mm HardieFlex nails
corner flashing. Installation to 2. Architectural drawings to be read as a set
150mm wide minimum. James Hardie Cladding with and in conjunction with relevant architectural
manufacture's requirements.
selecting coating. and structural drawings, calculations,
Selected bevelback timber specifications and all other consent
Proprietary CLD structural weatherboard. Size and finish to be H3.1 50x20 timber batten. documentation.
Selected bevelback timber
batten. If timber batten is used, selected by client. Installation to
weatherboard. Size and finish to
refer to installation manual for manufacturer's requirements. Selected wall underlay 3. The contractor shall verify all dimensions on
be selected by client. Installation site before commencing the work. Use figured
alternative fixing layout.
to manufacturer's requirements. dimensions in preference to scaled.
Stud or blocking to suit site Selected R2.2 insulation.
Selected wall underlay Flashing tape applied to requirement. 4. Construction work to be in accordance with
corner. 100mm both sides. Selected interior wall lining.
New Zealand Building code and standards.
James Hardie Cladding with 65 65
Selected R2.2 wall insulation 5. All proprietary and manufactured items to be
selecting coating. Installation to
cover cover installed in accordance with manufacturers
manufacturer's requirements. Selected interior wall lining. specifications.
inside

Building Consent

22 JH Cladding/Bvbk Wbd Corner_Ext 23 JH Cladding/Bvb Wbd Junction_Vertical Revision Schedule


No Description Date

B1-02 1:5 B1-02 1:5


Selected wall lining.
Selected wall underlay
Selected floor lining.
Selected R2.2 wall insulation.
Floor board. Proprietary CLD structural
batten. If timber batten is used,
refer to installation manual for
alternative fixing layout.
idc group
James Hardie Cladding with land development consultants
Refer to Engineer's Drawings selecting coating. Installation to
for mid floor structure details. manufacturer's requirements.
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
2/240x45 H3.2 boundary joist.
p.o. box 91421 Victoria Street West. Auckland
Cavity base closure with perforated
phone: 09 970 1018
base 75mm min. upstand. Positioned email: info@idcltd.co.nz
to form 15mm min. drip edge.
Selected ceiling lining. Wall underlay to lapped project:

50

5 gap
over flashing. 35mm min. cover. 74 Jolson Road, Mt Wellington

50
Aluminium head flashing with 15° slope.
50mm min. upstand behind panel and title:

Selected wall lining. 50mm min. cover over bevelback. Construction Details
Bevelback cladding system.
Selected R2.2 wall insulation.
designed by drawn by checked by
H3.1 50x20 timber batten. JL FA JL
Selected Wall Underlay drawing no. date scale
F10-10 12/07/2021 1 : 5@ A3

JH Cladding/Bvb Wbd Junction_Horizontal


Job No: 1528
Client: Owner
24 Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
B3-01 1:5 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

Selected bevelback timber weatherboard. 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
Size and finish to be selected by client. and amendments and all T.A requirements.
Installation to manufacturer's requirements. Selected R2.2 insulation. New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
H3.1 50x20 timber batten. Alternative solutions to comply with The
building code.
Selected wall underlay Selected interior wall lining.
2. Architectural drawings to be read as a set
Wall underlay to lapped and in conjunction with relevant architectural
over flashing. 35mm min. cover. Refer to engineer's drawing and structural drawings, calculations,
for lintel and beam sizes specifications and all other consent
Cavity base closure with perforated base documentation.

35
75mm min. upstand. Positioned to form Waterproof air seal
15mm min. drip edge. 3. The contractor shall verify all dimensions on
with backing rod
10 cover

site before commencing the work. Use figured


5 gap dimensions in preference to scaled.

Sealant for very high or 4. Construction work to be in accordance with


extra high wind zone New Zealand Building code and standards.
Packer
Aluminium head flashing with 5. All proprietary and manufactured items to be
stop ends and 15° slope installed in accordance with manufacturers
Wall underlay dressed into specifications.
opening. Flexible flashing
Selected aluminium window
tape installed over wall
joinery. Installation to
underlay to corners. 20 Building Consent
manufacturer's requirements. H3.1 Scriber cut to fit.
Install restrictors as required to Line of head flashing
over extend 20mm extenstion
NZBC F4/AS1 requirements. inside H3.1 50x20 timber batten. Revision Schedule
outside beyond at each end. outside 10 No Description Date

Selected aluminium window Selected bevelback timber


cover
joinery. Installation to weatherboard. Size and finish to
Selected aluminium window joinery. manufacturer's requirements. be selected by client. Installation
Installation to manufacturer's 8mm packer. Install restrictors as required to to manufacturer's requirements.
requirements. Install restrictors as NZBC F4/AS1 requirements.
required to NZBC F4/AS1 requirements. Waterproof airseal to perimeter
of trim cavity with expandable
Building paper dressed
foam or sealant as per E2/AS1
10 cover

H3.2 frame block.


into opening with flexible Selected R2.2 insulation.
clause 9.1.6.
flashing tape installed
H3.2 sill block.
Wall underlay dressed into over wrap to corners.
Sill support as required
by joinery manufacturer.
opening. Flexible flashing tape
installed over wall underlay to Packer. idc group
Selected interior wall lining.
corners. Flashing tape installed land development consultants
H3.1 50x20 timber batten. as per E2/AS1 Fig.72B. Waterproof air seal inside
with backing rod. Selected wall underlay
Selected wall underlay Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
Selected bevelback timber
weatherboard. Size and finish to be 26 Bevelback Wbd Window Jamb p.o. box 91421 Victoria Street West. Auckland

selected by client. Installation to


manufacturer's requirements. B1-02 1:5
phone: 09 970 1018
email: info@idcltd.co.nz

Notes
project:
1. Flashing materials must be selected based on environmental exposure, refer
to NZS 3604 and table 20 of NZBC 'E2/AS1' 74 Jolson Road, Mt Wellington
2. Building underlay must comply with acceptable solution NZBC 'E2/AS1' and
NZS 3604
title:
3. Flashing tape must have proven compatibility with the selected building
underlay and other materials with which it comes into contact as per table 21 Construction Details
of 'E2/AS1'
4. Sill support bars must comply with EM6, E2/AS1' and 'B2/AS1'
designed by drawn by checked by
JL FA JL
Refer to the manufacturer or supplier for technical informations of these materials drawing no. date scale
F10-11 12/07/2021 1 : 5@ A3

25 Bevelback Wbd Window Head & Sill Job No: 1528


Client: Owner
Contact: 027 872 2235
B2-02 1:5
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Selected R2.2 insulation. Alternative solutions to comply with The
building code.
James Hardie Cladding with Proprietary CLD structural
selected coating. Installation to batten. If timber batten is used, 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
manufacturer's requirements. refer to installation manual for
and structural drawings, calculations,
alternative fixing layout. specifications and all other consent
Proprietary tape or alternatively documentation.
additional layer of flexible underlay Selected wall underlay
over head flashing. 35mm min. cover 3. The contractor shall verify all dimensions on
Refer to engineer's drawing site before commencing the work. Use figured
Proprietary uPVC vent strip dimensions in preference to scaled.
for lintel and beam sizes

min. cover
Stop end to head flashing behind 4. Construction work to be in accordance with

35
the cladding or seal the flashing Selected interior wall lining. New Zealand Building code and standards.
cover 15

against the cavity battens


5. All proprietary and manufactured items to be
5
10

installed in accordance with manufacturers


One piece aluminium Inseal min 19mm thick x 10mm wide specifications.
Waterproof air seal 3109 alternatively a flexible sealant bead
head flashing with stop
with backing rod applied with a pef rod between window
ends and 15o slope
Packer frame and cladding can be used. Building Consent
outside Continuous protective sealant.
Flashing tape over underlay Wall underlay dressed into
required in corners only. opening. Flexible flashing Line of head flashing over extend Revision Schedule

20mm min. beyond at each end. Proprietary CLD structural batten. No Description Date
tape installed over wall 10 20
underlay to corners.
Selected aluminium window joinery. min.min. James Hardie Cladding with
Installation to manufacturer's selecting coating.
outside inside requirement. install restrictors as

5
required to NZBC F4/AS1 requirements. Selected wall underlay
Selected aluminium window
joinery. Installation to Edge of sheet to be sealed. Selected R2.2 insulation.
manufacturer's requirements. 8mm packer.
Install restrictors as required to
NZBC F4/AS1 requirements. Waterproof air seal Packer. Building paper dressed into opening
with backing rod with flexible flashing tape installed
over wrap to corners. idc group
cover

Edge of sheet and to


10

Waterproof airseal or sealant


be sealed before inside Selected interior wall lining. land development consultants
over PEF rod as per section
window is installed. Selected interior wall lining.
9.1.6 of E2/AS1
Sill support as required Selected R2.2 insulation. Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
by joinery manufacturer. Wall underlay dressed into
opening. Flexible flashing tape 28 JH Cladding Window Jamb Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland


Proprietary CLD structural batten. installed over wall underlay to
B1-02 1:5 phone: 09 970 1018

James Hardie Cladding with corners. Flashing tape installed email: info@idcltd.co.nz

selecting coating. Installation to as per E2/AS1 Fig.72B.


manufacturer's requirements. project:
74 Jolson Road, Mt Wellington
Notes
1. Flashing materials must be selected based on environmental exposure, refer to NZS
3604 and table 20 of NZBC 'E2/AS1' title:
2. Building underlay must comply with acceptable solution NZBC 'E2/AS1' and NZS 3604 Construction Details
3. Flashing tape must have proven compatibility with the selected building underlay and
other materials with which it comes into contact as per table 21 of 'E2/AS1'
4. Sill support bars must comply with EM6, E2/AS1' and 'B2/AS1' designed by drawn by checked by
JL FA JL
drawing no. date scale
refer to the manufacturer or supplier for technical informations of these materials F10-12 12/07/2021 1 : 5@ A3

27 JH Cladding Window Head & Sill Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
B2-01 1:5 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Selected bevelback timber weatherboard. New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Size and finish to be selected by client.
Selected R2.2 insulation. Alternative solutions to comply with The
Installation to manufacturer's requirements. building code.
H3.1 50x20 timber batten.
2. Architectural drawings to be read as a set
Selected interior wall lining.
Selected wall underlay and in conjunction with relevant architectural
and structural drawings, calculations,
Cavity base closure with specifications and all other consent
perforated base 75mm min. documentation.
Refer to engineer's drawing
upstand. Positioned to form
for lintel and beam sizes 3. The contractor shall verify all dimensions on
15mm min. drip edge.
site before commencing the work. Use figured
35

Wall underlay to lapped Waterproof air seal dimensions in preference to scaled.


over flashing. 35mm min. cover. with backing rod
4. Construction work to be in accordance with
cover
10
5 gap

New Zealand Building code and standards.


Sealant for very high or inside
5. All proprietary and manufactured items to be
extra high wind zone
installed in accordance with manufacturers
Packer specifications.
Aluminium head flashing with
stop ends and 15° slope outside Wall underlay dressed into 20
Line of head flashing
opening. Flexible flashing H3.1 Scriber cut to fit. outside Building Consent
Selected aluminium door extension over extend 20mm
joinery. Installation to tape installed over wall
beyond at each end.
underlay to corners. Selected bevelback timber 10
manufacturer's requirements. Revision Schedule
weatherboard. Size and finish to Selected aluminium door
Install restrictors as required to No Description Date
be selected by client. Installation joinery. Installation to
NZBC F4/AS1 requirements.
to manufacturer's requirements. manufacturer's requirements.

29 Bevelback Wbd Door Head Install restrictors as required to


NZBC F4/AS1 requirements.
H3.1 50x20 timber batten.
B3-01 1:5 Building paper dressed
into opening with flexible
flashing tape installed
Flashing tape dressed up 100mm Selected R2.2 insulation. over wrap to corners.
8mm packer.
min. against trimmer stud.
Selected interior wall lining. Packer.
Selected aluminium door
Waterproof airseal to perimeter idc group
of trim cavity with expandable Selected wall underlay inside Waterproof air seal
joinery. Installation to land development consultants
foam or sealant as per section with backing rod.
manufacturer's requirements.
9.1.6 of E2/AS1
Install restrictors as required to
Unit 4, building D, 4 Pacific Rise,
NZBC F4/AS1 requirements. Selected floor finish
31 Bevelback Wbd Door Jamb Mt Wellington,
Auckland. New Zealand.
10 cover

H3.2 frame block. p.o. box 91421 Victoria Street West. Auckland
B1-01 1:5
225mm min. to unpaved ground

phone: 09 970 1018


150mm min. to paved ground

Door sill support bar email: info@idcltd.co.nz

Flashing tape applied to the project:


edge of concrete slab.
74 Jolson Road, Mt Wellington

title:

Foundation / Substructure Construction Details


as per Engineer's specification.
designed by drawn by checked by
Selected concrete underlay. Installation to JL FA JL
Manufacturer's requirements. drawing no. date scale
F10-13 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner

30 Typical Weatherboard Door Sill Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471

B3-01 1:5 COPYRIGHT


THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
TYPICAL HEAD DETAIL Bevelback weatherboard on and structural drawings, calculations,
H3.2 timber cavity batten on building paper. specifications and all other consent
documentation.
R2.2 selected insulation Size and finish to be selected by client.
to external walls. Installation to manufacturer's requirements. 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
Gib interior wall lining. Ex 50 x 25mm H3.2 cavity batten dimensions in preference to scaled.

Building paper to lap over Al. head 4. Construction work to be in accordance with
Additional blocking New Zealand Building code and standards.
flashing upstand flashing. 50mm min. cover
as required.
75mm min.

5. All proprietary and manufactured items to be

5mm gap without seal


Proprietary vented cavity closure strip installed in accordance with manufacturers
specifications.

Continue wall Flashing 15° min slope, rivet to metal angle,


underlay around Powder coated
required at headaluminium
only with ahead flashing
minimum cover of Building Consent
framing. 10mm. Head flashing to be taken 20mm past
H3.1 Scriber cut to fit.. Revision Schedule
Airseal around all sides No Description Date
of meter box
proprietary
Flashing to lap over the metal meter box
metal angle. Metal angle to
be continuous around meter outside Continue building
Airseal around all paper around framing.
box. Seal and rivet in place.
sides of meter box

inside
Flexible flashing
tape at corners
Flexible flashing tape at corners
idc group
10 min. overlap

Airseal around all sides of meter box Metal angle sealed


and rivet in place. Metal angle sealed
and rivet in place. land development consultants

Continue building underlay


Proprietary
around framing Weatherboard on cavity
Unit 4, building D, 4 Pacific Rise,
metal meter box Mt Wellington,
Continuous sealant to metal angle batten on building paper.
Auckland. New Zealand.

Selected interior wall lining. 20 p.o. box 91421 Victoria Street West. Auckland
H3.1 Scriber cut to fit.
Line of head flashing phone: 09 970 1018
TYPICAL SILL DETAIL Seal against meter box. email: info@idcltd.co.nz
over 20mm past H3.1
Scriber cut to fit.
project:
TYPICAL JAMB DETAIL
74 Jolson Road, Mt Wellington

title:

31 Typical Meter Box Construction Details

1:5
designed by drawn by checked by
JL FA JL
drawing no. date scale
F10-14 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Fixing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F11-01 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Fixing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F11-02 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
Level R Level R dimensions in preference to scaled.
11365 11365
4. Construction work to be in accordance with
New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

headroom
3015
Level 1 15 Level 1 15 Revision Schedule
No Description Date
8920 8920 nosing
nosing

Outline of balustrade Outline of balustrade


total stair height

headroom

headroom
280
2720

2219

2219
280
tread
tread
handrail

handrail
950

950
riser
181

riser
181
°
°

34.38
idc group
34.38

pitch
pitch

Level 0 Level 0
land development consultants
6200 6200

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:

1 Lot 1 Stair Section 2 Lot 2 Stair Section 74 Jolson Road, Mt Wellington

B3-01 1 : 50 C3-01 1 : 50 title:


Inter-Floor Stairs Sections

designed by drawn by checked by


JL FA JL
drawing no. date scale
F12-01 12/07/2021 1 : 50@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


Level R Level R site before commencing the work. Use figured
11365 11365 dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

balustrade
headroom
handrail

handrail

1000
3132
950

950
Building Consent

headroom
2634
Level 1 Level 1 15
Revision Schedule
8920 8920 nosing No Description Date
riser
181

total stair height

total stair height


headroom

headroom
2000

2720

2720

riser
181

2219
280 280
15
tread tread
handrail
950

nosing
34.38

°
34.38
pitch

pitch
Level 0 Level 0 idc group
°

6200 6200
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018

3 Lot 3 Stair Section 4 Lot 4 Stair Section email: info@idcltd.co.nz

D3-01 1 : 50 E3-02 1 : 50 project:


74 Jolson Road, Mt Wellington

title:
Inter-Floor Stairs Sections

designed by drawn by checked by


JL FA JL
drawing no. date scale
F12-02 12/07/2021 1 : 50@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


Level R Level R site before commencing the work. Use figured
dimensions in preference to scaled.
11365 11365
4. Construction work to be in accordance with
New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

balustrade
handrail

handril
15 Building Consent

1000

1000

headroom
950

950

2022
headroom

15 nosing
2384

Level 1 Level 1 Revision Schedule


No Description Date
8920 nosing 8920
280

tread
total stair height

headroom
headroom

2072
2720

riser
181

2219

riser
280

181
tread
°

34.48
34.38

idc group
pitch

pitch
Level 0 Level 0

°
6200 6200 land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.
pitch at center of tread
p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

5 Lot 5 Stair Section 6 Lot 6 Stair Section project:


74 Jolson Road, Mt Wellington
E3-03 1 : 50 E3-03 1 : 50
title:
Inter-Floor Stairs Sections

designed by drawn by checked by


JL FA JL
drawing no. date scale
F12-03 12/07/2021 1 : 50@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
Provide interlocking rail to all glass and amendments and all T.A requirements.
blaustrades. Handrail to be tied back to New Zealand Standards, Compliance
walls at ends if possible. Provide posts documents, NZS3604 2011 and amendments.
where no wall is available. In accordence Alternative solutions to comply with The
with NZS 4223.3:2016 building code.

2. Architectural drawings to be read as a set


Toughened laminated frameless glass balustrade and in conjunction with relevant architectural
with proprietary SS anchor fixing. Gib interior wall lining. and structural drawings, calculations,
Design and installed by glass fittings supplier. specifications and all other consent

1000 AFFL
To NZBC F4/AS1 requirements. 45 documentation.

Glass selection to NZS:4223: Part 1: 2016. 3. The contractor shall verify all dimensions on
50mm Ø timber handrail site before commencing the work. Use figured
dimensions in preference to scaled.
Refer to Engineer's plans for typical balustrade / Glass balustrade
mid floor connection details. proprietary handrail 4. Construction work to be in accordance with

Above the pitchline


bracket at 600mm New Zealand Building code and standards.
centres

950mm
5. All proprietary and manufactured items to be
Timber nogging at installed in accordance with manufacturers
proprietary baluster fixing specifications.
handrail fixing locations

2/240x45 boundary joist,


Building Consent
well nailed together.

Lumberlok 6kN strap at Revision Schedule


No Description Date
Interior ceiling lining As specified by engineer the botoom (6/Ø3.15
nails each end).

Typical Glass Balustrade Typical Handrail


1 1 : 10
2 1:5

idc group
land development consultants
189 mm riser

280 mm tread
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


37°

email: info@idcltd.co.nz

15 mm tread projection
project:
74 Jolson Road, Mt Wellington
stairs to comply with
NZBC: D1/AS1 requirements.
title:
Inter-Floor Stairs Details

designed by drawn by checked by


JL FA JL

Typical Stair Tread/Riser drawing no.


F12-04
date scale
12/07/2021 As indicated@ A3

3 1 : 10 Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


10mm GIB aqualine, paint finish Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
Half tile skirting along perimeter of bathroom New Zealand Standards, Compliance
Insulation as required.
Bondbreaker tape documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
10mm GIB aqualine, paint finish building code.
Flexible wet area silicon sealant
Half tile skirting along perimeter of bathroom Selected floor tiles 2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
Flexible wet area silicon sealant Mapleastic Aquadefense liquid and structural drawings, calculations,
applied waterproofing membrane specifications and all other consent
Selected floor tiles documentation.
Mapleastic Aquadefense liquid Screed as required
3. The contractor shall verify all dimensions on

150 mm min.
applied waterproofing membrane

150 mm min.
Warmup undertile heating element site before commencing the work. Use figured
return 150mm up wall installed to manufacturer's requirements. dimensions in preference to scaled.

Screed as required 6mm Marmox insulation board 4. Construction work to be in accordance with
New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

17mm min. plywood or wet area grade 17mm min. plywood or wet area grade
floor board as substrate. Installation to floor board as substrate. Installation to Building Consent
manufacturers requirements manufacturers requirements
Revision Schedule
No Description Date

1 Typical Tiled Skirting 2 Typical Tiled Floor with Undertile Heating


1:5 1:5

Selected tiles 32x32x0.55mm vertical fixed


galvanized steel angle.
10mm GIB aqualine, paint finish
idc group
land development consultants
Wet area sealant
Unit 4, building D, 4 Pacific Rise,
Bondbreaker tape Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland


Mapleastic Aquadefense liquid
applied waterproofing membrane. Selected tiles phone: 09 970 1018
Full extent (floor, wall to ceiling) to email: info@idcltd.co.nz

cover entire shower area. Bondbreak tape


project:
Screed as required Wet area sealant
74 Jolson Road, Mt Wellington
Mapleastic Aquadefense liquid
applied waterproofing membrane.
Full extent (floor, wall to ceiling) title:
to cover entire shower area. Wet-Area Waterproofing Details
17mm min. plywood or wet area grade 10mm GIB Aqualine.
floor board as substrate. Installation to
designed by drawn by checked by
manufacturers requirements FA
JL JL
drawing no. date scale
F13-01 12/07/2021 1 : 5@ A3

3 Typical Tiled Shower Wall 4 Typical Tiled Shower Corner Job No: 1528
Client: Owner

1:5 1:5 Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
10mm GIB Aqualine Alternative solutions to comply with The
10mm GIB Aqualine building code.
Mapleastic Aquadefense liquid
applied waterproofing membrane. Selected tiles 2. Architectural drawings to be read as a set
Floor to ceiling behind wall tiling and in conjunction with relevant architectural
and structural drawings, calculations,
Mapleastic Aquadefense liquid specifications and all other consent

5 -10mm
Selected tiles applied waterproofing membrane. documentation.
Wall to ceiling to cover all sides of
Wet area sealant bath tub 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
Wet area sealant dimensions in preference to scaled.
Selected vanity/kitchen top
Selected bath installed to 4. Construction work to be in accordance with
manufacturer's requirements New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

5 Typical Tiled Wall to Bench 6 Typical Tiled Wall to Bath Revision Schedule
No Description Date

1:5 1:5

Selected tiles

10mm GIB Aqualine

Mapleastic Aquadefense liquid applied


waterproofing membrane. Full extent (floor,
idc group
wall to ceiling) to cover entire shower area land development consultants
GIB Aqualine
Wet area sealant
Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Mapleastic Aquadefense liquid
5 -10mm

Selected shower tray installed to Auckland. New Zealand.

manufacturer's requirements applied


p.o. box 91421 Victoria Street West. Auckland
waterproofing membrane
Shower tray underlay Selected tiles phone: 09 970 1018
150 mm min.

email: info@idcltd.co.nz
upstand

Mapleastic Aquadefense Tap body


continuous liquid applied project:
waterproofing membrane. Silicone sealant 74 Jolson Road, Mt Wellington

Note: Where impact noise


from pipes is an issue, fix all title:
pipes on resilient brackets
17mm min. plywood or wet area grade Wet-Area Waterproofing Details
floor board as substrate. Installation to
manufacturers requirements
designed by drawn by checked by
JL FA JL
drawing no. date scale

7 Typical Tiled Wall to Shower Base 8 Typical Tiled Wall Penetration F13-02 12/07/2021 1 : 5@ A3

Job No: 1528


1:5 1:5 Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
25mm-40mm gap on general notes:
each side 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
Timber wall framing and amendments and all T.A requirements.
New Zealand Standards, Compliance
GIB® plasterboard documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
GIB Barrierline® GIB® Rondo® 140 building code.

Perimeter Channel fixed 2. Architectural drawings to be read as a set


to concrete slab with steel and in conjunction with relevant architectural
and structural drawings, calculations,
anchors at 150mm max. specifications and all other consent
centres from ends and documentation.

600mm max. centres 3. The contractor shall verify all dimensions on


Seal GIB® Rondo® 140 between site before commencing the work. Use figured
dimensions in preference to scaled.
Perimeter Channel to
4. Construction work to be in accordance with
floor slab on one side with New Zealand Building code and standards.
fire/acoustic sealant
5. All proprietary and manufactured items to be
installed in accordance with manufacturers
DPC specifications.

Building Consent
100 min.

Revision Schedule
No Description Date
100 min.

400 min. Continuous GIB®


Rondo® 140 Perimeter
Channel fixed back to
1 GIB_Intertenancy Wall_Base at Slab GIB® Rondo® metal back at 600mm centres idc group
batten system
E3-01 1:5 land development consultants
Boundary joist or solid
blocking Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

GIB® plasterboard
title:
Pink® Batts® R2.2 Fireproofing Details
(90mm) glasswool Floor joist
insulation GIB® Wall Clips at each designed by drawn by checked by
GIB® plasterboard GIB® H-Stud both sides JL FA JL
drawing no. date scale
of wall F14-01 12/07/2021 As indicated@ A3

Job No: 1528


Client: Owner

2 GIB_Intertenancy Wall_Stepped Timber Floor Contact: 027 872 2235


DP No: Lot 91 DP 45393
CT No: NA75B/471

E3-01 1 : 10 COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
Leave 10mm gap between top of specifications and all other consent
GIB Barrierline® and underside of documentation.
battens and fill all gaps with
mineral wool or ceramic fibre cavity 3. The contractor shall verify all dimensions on
site before commencing the work. Use figured
insulation
dimensions in preference to scaled.
Roofing material
4. Construction work to be in accordance with
GIB® Rondo® 140 Perimeter New Zealand Building code and standards.
Channel
5. All proprietary and manufactured items to be
installed in accordance with manufacturers
solid fill barrierline
specifications.

GIB® Rondo® 140 Perimeter Building Consent


Channel
Revision Schedule
No Description Date
GIB® Wall Clips at each GIB® Timber
H-Stud, both sides

45mm stud idc group


GIB® Rondo® 140 Perimeter land development consultants
Channel
Eaves lining GIB® Wall Clips at each GIB®
H-Stud, both sides Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.
Fit solid treated timber batten to
gap at end of wall p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018

Wall underlay GIB® Intertenancy Barrier System email: info@idcltd.co.nz

project:

3 GIB_Intertenancy Wall_Eave Detail 74 Jolson Road, Mt Wellington

E1-07 1 : 10 title:
Fireproofing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F14-02 12/07/2021 1 : 10@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


ll and in conjunction with relevant architectural

f wa and structural drawings, calculations,


so specifications and all other consent
s ide documentation.

, b oth
s 3. The contractor shall verify all dimensions on
e n tre site before commencing the work. Use figured
c
ax .
dimensions in preference to scaled.
m m
600 m 4. Construction work to be in accordance with

s at New Zealand Building code and standards.


a p
l S tr 5. All proprietary and manufactured items to be
l
Wa installed in accordance with manufacturers

600mm max
IB® specifications.

o rG Back to back GIB®


C lips Rondo® 140 Perimeter Building Consent
ll
® Wa Channels installed
GIB GIB Barrierline®
installed horizontally Revision Schedule
No Description Date
horizontally

100mm max.
Nominal 10mm gap Truss chord
between top of GIB
Barrierline® and roof
batten
Truss bottom chord
idc group
land development consultants
16mm GIB Fyreline® fixed
to GIB Barrierline® with
Trimmer placed in trusses chipboard screws at 400mm Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
each side of wall to allow x 400mm max. centres Auckland. New Zealand.

fixing of GIB® Wall Clips p.o. box 91421 Victoria Street West. Auckland

GIB Barrierline® W
. all framing GIB Barrierline® phone: 09 970 1018
email: info@idcltd.co.nz
installed vertically installed vertically

project:
74 Jolson Road, Mt Wellington

4 GIB_Intertenancy Wall_Roof void detail at Horizontal sheeting (Side Elevation) title:


Fireproofing Details
E1-07 1 : 10
designed by drawn by checked by
JL FA JL
drawing no. date scale
F14-03 12/07/2021 1 : 10@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
Fill void between battens with and amendments and all T.A requirements.
mineral wool or ceramic fibre cavity New Zealand Standards, Compliance
insulation, 300mm min. width, documents, NZS3604 2011 and amendments.
40kg/m³ min. density Alternative solutions to comply with The
Nominal 10mm gap between top of building code.
GIB Barrierline® and roof batten
Flexible fire retardant underlay
2. Architectural drawings to be read as a set
and in conjunction with relevant architectural
Roofing material and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.
GIB® Wall Clips at each GIB®
H-Stud both sides of wall 4. Construction work to be in accordance with

clip to joint in GIB Barrierline®


New Zealand Building code and standards.
Continuous GIB® Rondo® 140

600mm max. from GIB® Wall


Perimeter Channel fixed back to 5. All proprietary and manufactured items to be
back at 600mm centres installed in accordance with manufacturers
specifications.

Building Consent
Roof framing

Revision Schedule
No Description Date
GIB Clip®

GIB® plasterboard

200mm minimum
Required insulation minimum
Pink® Batts® R2.2 (115mm)
glasswool idc group
GIB® Rondo® 340 Perimeter
Channel land development consultants

GIB® Wall Clips at each GIB® Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
H-Stud both sides of wall Auckland. New Zealand.

GIB Barrierline® p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018

16mm GIB Fyreline® fixed to GIB email: info@idcltd.co.nz

Barrierline® with chipboard screws


at 400mm max. centres project:
9mm minimum gap 74 Jolson Road, Mt Wellington

title:
25
−40mm gap each side of wall
Fireproofing Details

5 GIB_Intertenancy Wall_Ceiling and Roof


designed by drawn by checked by
E3-01 1:5 JL FA JL
drawing no. date scale
F14-04 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
GIB® Rondo® 140 Perimeter documents, NZS3604 2011 and amendments.
Fill void between battens with Channel Alternative solutions to comply with The
mineral wool or ceramic fibre cavity building code.
insulation, 300mm min. width, Unit 2 roof battens to extend
40kg/m³ min. density across and connect to top plate of 2. Architectural drawings to be read as a set
Unit 1 external wall and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
GIB Weatherline® documentation.

Wall cladding to comply with 3. The contractor shall verify all dimensions on
NZBC E2 site before commencing the work. Use figured
dimensions in preference to scaled.
GIB® Wall Clips at each GIB® 4. Construction work to be in accordance with
H-Stud both sides of wall New Zealand Building code and standards.
Roof truss
5. All proprietary and manufactured items to be
installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

Continous GIB® Rondo® 140


Perimeter Channel fixed back to
back at 600mm centres

GIB Barrierline®

idc group
land development consultants
200mm
min.

GIB® plasterboard Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.
GIB® plasterboard
p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018

16mm GIB Fyreline® fixed to GIB email: info@idcltd.co.nz

Barrierline® with chipboard screws


at 400mm max. centres project:
74 Jolson Road, Mt Wellington
UNIT 1 UNIT 2

title:
Fireproofing Details

6 GIB_Intertenancy Wall_Stepped Roof


designed by drawn by checked by
E1-07 1 : 10 JL FA JL
drawing no. date scale
F14-05 12/07/2021 1 : 10@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
GIB® Wall Clips at each general notes:
GIB® plasterboard GIB Barrierline® GIB® H-Stud, both sides 1. All work to comply with NZ Building Code,
Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


GIB® plasterboard installed in accordance with manufacturers
specifications.

Timber wall framing


Building Consent

Revision Schedule

7 GIB_Intertenancy Wall_Junction with non fire rated wall No Description Date

Wall underlay
E1-02 1:5
External wall cladding to comply
with NZBC E2

GIB® Wall Clips or GIB® Wall


Straps at wall ends both sides
Cavity batten
GIB® plasterboard

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

Fill void between battens with


mineral wool or ceramic fibre cavity title:
insulation, 300mm min. width Fireproofing Details
GIB Barrierline®
designed by drawn by checked by
Timber wall framing FA
JL JL
GIB® Wall Clips at each GIB® drawing no. date scale

H-Stud, both sides F14-06 12/07/2021 1 : 5@ A3

Job No: 1528

GIB_Intertenancy Wall_ Return in External Wall


Client: Owner
Contact: 027 872 2235
8 DP No: Lot 91 DP 45393
CT No: NA75B/471

E1-01 1:5 COPYRIGHT


THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
GIB® plasterboard and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Wall underlay Alternative solutions to comply with The
GIB Barrierline® building code.

External wall cladding to comply 2. Architectural drawings to be read as a set


with NZBC E2 and in conjunction with relevant architectural
and structural drawings, calculations,
Fix solid H3.1 treated timber batten specifications and all other consent
to GIB® Rondo® 140 Perimeter documentation.
Channel only. Timber batten for
fire stopping, not for cladding 3. The contractor shall verify all dimensions on
fixing. Do not connect timber site before commencing the work. Use figured
batten to timber frames on each dimensions in preference to scaled.
side
4. Construction work to be in accordance with
Control joint opposite GIB New Zealand Building code and standards.
Barrierline®. Detail by cladding
supplier 5. All proprietary and manufactured items to be
installed in accordance with manufacturers
GIB® Rondo® 140 Perimeter specifications.
Channel vertically at outer ends of
wall
Building Consent
GIB® Wall Clips or GIB® Wall
Straps at wall ends both sides Revision Schedule
No Description Date

GIB® Wall Clips at each GIB®


H-Stud, both sides
Timber wall framing

9 GIB_Intertenancy Wall_External Timber Frame Wall


E1-02 1:5
idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Fireproofing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F14-07 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Fireproofing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale

10 Fxture Against Fire Wall Detail F14-08

Job No: 1528


12/07/2021 1 : 5@ A3

Client: Owner
1:5 Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


site before commencing the work. Use figured
dimensions in preference to scaled.

4. Construction work to be in accordance with


New Zealand Building code and standards.

5. All proprietary and manufactured items to be


installed in accordance with manufacturers
specifications.

Building Consent

Revision Schedule
No Description Date

idc group
land development consultants

Unit 4, building D, 4 Pacific Rise,


Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

project:
74 Jolson Road, Mt Wellington

title:
Fireproofing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F14-09 12/07/2021 1 : 5@ A3

11 Fire Rated Footing/Eave Detail Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
B3-01 1:5 CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.

3. The contractor shall verify all dimensions on


Villaboard or Fyreline wall lining Selected wall underlay. site before commencing the work. Use figured
dimensions in preference to scaled.
Refer to engineer's drawings for fire James Hardie Linea bevelback
4. Construction work to be in accordance with
rated wall framing specifications weatherboard on proprietary cavity New Zealand Building code and standards.
battens. Installation to NZBC E2/AS1
Selected floor lining. & manufacturer's requirement. Size 5. All proprietary and manufactured items to be
and finishes to be selected by client. installed in accordance with manufacturers
Floor board. specifications.

Blocking between studs


behind flashing. Building Consent
Refer to engineer's drawings
for mid floor framing details. Revision Schedule
Proprietary Cavity base closure with
No Description Date
perforated base and min. 75mm
10mm min. Protecta FR upstand. Positioned to give 15mm
acrylic fire sealant stringer min drip edge to cladding.
and wall fraiming.

50
Additional wall underlay to lap

15
240x45 stringer fixed to full over flashing 35mm min.

35
height studs. Refer to

5
engineer's drawings for stringer Purpose made metal flashing 15°
and fixing details. min. slope. provide 50mm min.
upstand behind cladding and
35mm min. cover over cladding.
Selected ceiling lining on
70x35mm ceiling batten at 400mm R2.2 selected insulation
idc group
crs. max. Refer to engineer's land development consultants
drawing for extent of fire rated James Hardie Linea
ceiling lining (if applicable). bevelback weatherboard on Unit 4, building D, 4 Pacific Rise,
proprietary cavity battens. Mt Wellington,
Auckland. New Zealand.
Villaboard or Fyreline wall lining
p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

12 Fire Rated Mid-Floor Detail project:


74 Jolson Road, Mt Wellington
B3-01 1:5
title:
Fireproofing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F14-10 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.
general notes:

1. All work to comply with NZ Building Code,


Building Regulations1992, Building Act 2004
and amendments and all T.A requirements.
New Zealand Standards, Compliance
documents, NZS3604 2011 and amendments.
Alternative solutions to comply with The
building code.

2. Architectural drawings to be read as a set


and in conjunction with relevant architectural
and structural drawings, calculations,
specifications and all other consent
documentation.
Selected wall lining.
3. The contractor shall verify all dimensions on
Selected wall underlay site before commencing the work. Use figured
Selected floor lining. inside dimensions in preference to scaled.

Floor board. Selected R2.2 wall insulation. 4. Construction work to be in accordance with
New Zealand Building code and standards.
James Hardie Cladding.
Installation to manufacturer's 5. All proprietary and manufactured items to be
requirements. installed in accordance with manufacturers
specifications.
Proprietary CLD structural
Selected R1.6 floor insulation. batten. If timber batten is used,
Refer to Engineer's Drawings Building Consent
refer to installation manual for
for mid floor structure details. alternative fixing layout.
Revision Schedule
2/240x45 H3.2 boundary joist. No Description Date

Wall underlay to carry over top plate. Wire mesh to support insulation.

Selected ceiling lining. Proprietary Cavity base closure with


perforated base and min. 75mm upstand.
Positioned to give 15mm min drip edge
to cladding.

H3.1 timber soffit moulding refer to floor plans


Continuous bead of sealant
for overhang
Selected wall lining. 70x35 soffit batten at 400crs. max. idc group
fixed to underside of Soffit joists. land development consultants
Selected R2.2 wall insulation. outside
4.5mm hardiflex soffit, paint finish.
Selected Wall Underlay Unit 4, building D, 4 Pacific Rise,
Mt Wellington,
Auckland. New Zealand.

p.o. box 91421 Victoria Street West. Auckland

phone: 09 970 1018


email: info@idcltd.co.nz

13 Axon Panel/Bvb Wbd Mid-Floor Fire Rated Soffit project:


B2-01 1:5 74 Jolson Road, Mt Wellington

title:
Fireproofing Details

designed by drawn by checked by


JL FA JL
drawing no. date scale
F14-11 12/07/2021 1 : 5@ A3

Job No: 1528


Client: Owner
Contact: 027 872 2235
DP No: Lot 91 DP 45393
CT No: NA75B/471
COPYRIGHT
THE COPYRIGHT OF THESE DRAWINGS AND ALL PARTS THEREOF
REMAIN THE PROPERTY OF IDC GROUP LTD.

You might also like