Professional Documents
Culture Documents
Wheel Alignment
Specifications
Torque
Description Value
Nuts-pas ball joint 40–55Nm
Nuts-rear upper arm to subframe 90–110Nm
Nuts-rear wheel toe-in adjust 90–110Nm
cardiagn.com
Specifications
Wheel alignment:
Front
cardiagn.com
cardiagn.com
8. Ensure wheel mounting clamps are adjusted to correct 4. Rear wheel toe-out angle adjust:
size and fitted securely to vehicle. a. Loosen 2 nuts securing trailing arm to subframe.
9. Ensure cameras are fitted and aligned correctly. b. Adjust toe-out angle to specification.
10. Carry out run-out compensation in accordance with
c. Tighten lock nut to 90–110Nm.
equipment manufacturer's instructions. Lower vehicle,
and allow vehicle suspension to return to level. d. Repeat above for other side.
11. Ensure steering wheel is in the central position.
Adjust
1. Observe readings from test equipment and adjust
geometry as required.
General Data
2. Front wheel alignment adjust:
a. Loosen lock nut on front track rod.
b. Adjust track rod to specification.
c. Tighten lock nut to 40–55Nm.
d. Repeat above for other side. S 344014