Professional Documents
Culture Documents
Issued on 09/06/2015
1
Not control document. Issued on 09/06/2015
1. SET UP
Select suitable location and connect solutions as below:
Fig 4 a Fig 4 b
N.B. For reliable operation and to provide a safe working environment please
ensure that the table/bench supporting is strong and stable enough to support the
weight and size of the analyzer and accessories. (e.g. optional autosampler)
2. If you have the optional autosampler please remove from shipping box carefully. Check
contents against packing list. If anything is missing contact provider/supplier.
3. Ensure that is sufficient space for the analyzer and any peripherals on level well-
supported surface in well–ventilated location avoiding exposure to direct sunlight or
near to potential interfering devices( e.g. Centrifuges or fans)
2
Not control document. Issued on 09/06/2015
Check that reagent tubes are connected correctly and not loose
Check that power cords are connected to the analyzer (and autosampler, if needed)
Open the front cover to ensure that there are no leakages around shear valve and
syringes
Check for any salt stains around tubing and reagent containers
Empty waste container and reset the waste level in the Main
menu/Diagnostics/Reagent status panel
To power up the Abacus 5 analyzer
1. Turn on main power switch to the up positions “1” on the rear panel located near the
power connection
2. If the optional autosampler is installed, turn on the power position using switch on
right of unit.
3. Turn on printer or any other peripherals
To start the user interface
1. Press on the standby power switch near top of rear panel. N.B. The standby switch
springs back down after activation.
2. This starts the following sequence of events
a) The internal computer starts
b) The embedded MS Windows SW starts up and the display initializes a color change
in the screen
c) The screen displays the A5 logo screen and start-up status is displayed in the
bottom right corner of the logo.
d) If in multi-user option is enabled a user ID 7 password is required
e) The Abacus 5 main menu is displayed
f) The screens below are shown
3
Not control document. Issued on 09/06/2015
4
Not control document. Issued on 09/06/2015
A5 Shut down
A5 Powering off
Preparing Abacus 5 for shipment
5
Not control document. Issued on 09/06/2015