Professional Documents
Culture Documents
CONTROL 21490130
MATERIA
ESTUDIO DEL TRABAJO
ALUMNO (A)
MORA TORRES KARLA FERNANDA
NO.CONTROL
21490130
DOCENTE
JULIO CESAR ROMERO GONZALEZ
ACTIVIDAD 4
Unidad I
1) Obtain a nut from a parts bin located within reach, place it on a bolt and
run it down with 7 finger actions.
o A1 B0 G1 A0 B0 P6 F10 A0 B0 P0 A0 = 18x10 = 180 TMU
o 6.48 sec.
o 0.108 min
o 0.0018 hrs.
2) Walk 3 steps to pick up a screwdriver, return 3 steps to place it on a
screw, and turn it down 8 wrist-turns, then aside tool within reach.
A6 B6 G1 A6 B0 P6 F16 A1 B0 P1 A0 = 34x10 = 43*10=430 TMU
o 15.48 sec.
o 0.258 min
o 0.0043 hrs.
3) Obtain a wrench, interlocked with other tools, within reach at the
machine and loosen a nut with 5 wrist-strokes and aside the wrench to a bench
4 steps away.
A1 B0 G1 A0 B0 P0 L16 A0 B0 P1 A0 = 19x10 = 190 TMU
o 6.84 sec.
o 0.114 min
o 0.0019 hrs.
4) Pick up a hammer (within reach) and use 8 arm strikes to drive a nail,
then set the hammer aside.
A1 B0 G1 A1 B0 P0 F16 A1 B0 P1 A0 = 21x10 = 210 TMU
o 7.56 sec.
o 0.126 min
o 0.0021 hrs.
5) An operator picks up a job card (located within reach), reads the
instructions (45 words), and asides the card 3 steps away.
A1 B0 P1 A0 B0 P0 T24 A6 B0 P1 A0 = 33x10 = 330 TMU
o 11.88 sec.
o 0.198 min
o 0.0033 hrs.
MORA TORRES KARLA FERNANDA NO. CONTROL 21490130
o 9 sec.
o 0.15 min
o 0.0025 hrs.
7) An operator obtains a 12-inch fixed-end wrench within reach and fastens
a bolt using 5 arm strokes, then lays the wrench aside.
A1 B0 G1 A1 B0 P0 L32 A1 B0 P1 A0 = 37x10 = 370 TMU
o 13.32 sec.
o 0.222 min
o 0.0037 hrs.
o 6.48 sec.
o 0.108 min
o 0.0018 hrs.
o 1.08 sec.
o 0.018 min
o 0.0003 hrs.
Mora Torres Karla Fernanda NO.CONTROL 21490130
10) An operator gets a cloth from his pocket and wipes the surface of a
metal sheet (0.5 sq. ft.) and returns it to his pocket
A1 B0 G1 A1 B0 P1 S3 A1 B0 P1 A0 = 9x10 = 90 TMU
o 3.24 sec.
o 0.054 min
o 0.0009 hrs.