Professional Documents
Culture Documents
Feedback Amplifier Lab
Feedback Amplifier Lab
Feedback amplifier
Aim:
To perform transient and AC analysis of Voltage – Voltage Feedback amplifier
and hence determine gain, Bandwidth and GBW.
Procedure:
1. A Voltage -voltage feedback amplifier is obtained by using a resistive feedback
network connected to a single – ended output differential amplifier as shown
below. The single – ended output differential amplifier is obtained using a current
mirror load
3. Set the tail current source ISS to 1mA. For the input voltage, set Amplitude = 10mV,
Offset = 0.6V and Frequency = 1KHz
4. Perform transient analysis and determine the gain using the equation
𝑉out
Av = .
𝑉in
5. Perform AC analysis and note down the gain and the BW. Determine the gain -
BW product GBW.
Observations:
100 KΩ 1 MΩ
Result:
Marks: