Professional Documents
Culture Documents
FM200 System Training Test Sheet
FM200 System Training Test Sheet
Name
Function
Qualification module
Session Date
1- After FM200 system actuated, a ……….time delay is provided till the gas
discharged.
A 50 seconds
B 30 seconds
C 60 seconds
D 120 seconds
A 300 psi
B 240 psi
C 360 psi
D 400 psi
5- What will be the status of LED in control panel if you have a Cylinder
Low pressure?
A Alarm
B Trouble
C Supervisory
D Ground fault
A 3 months
B 1 year
C 6 months
D 1 month
A Missing Battery
C Low Voltage
D AC power failure
A 6months
B 1 year
C 2 year
D 3 year
10- What is the detection circuit end of line resistor value?
A 4.3K Ω
B 10 K Ω
C 1.2 K Ω
D 2.4 K Ω
C AC Brown out
B 10 K Ω
C 1.2 K Ω
D 2.4 K Ω
14- What will happen if you activate disable switch inside the panel?
A No detection occurs
C Panel still operates normally, Audible and releasing circuit will not activate in
this stage
D No supervisory occurs
15- What is the Agent Release circuit (Impulse Valve) end of line resistor
value?
A 4.3K Ω
B 10 K Ω
C 1.2 K Ω
D 2.4 K Ω