Professional Documents
Culture Documents
1. National Structural Code of the Philippines 2015, NSCP 2015, 2nd Printing – Generally for the entire
Analysis and Design Requirements
2. National Building Code of the Philippines
MATERIAL
Concrete Strength, f'c
Slab, Stair, Curbs, and SOG 20.7 MPa (3000 psi) ASTM C94
Beams, Columns, Footings 27.6 MPa (4000 psi) ASTM C94
Reinforcing Steel Bar, fy
Note: Material strengths shall follow the values stated above if not defined on computation
SOIL DATA
Soil Bearing Capacity 150 kPa Assumed
Soil Unit Weight 17.00 kN/m3 Table 204-1
3.0 LOADS:
Design Loads and forces are those resulting from the self-weight of the building including all other permanent loads
referred to as the Dead Loads, occupancy or non-permanent loads referred to as the Live Loads, and earthquake loads
as sometimes called as Seismic Loads acting in most critical combinations using the appropriate load factors as
recommended by the governing national structural code of the Philippines.