Professional Documents
Culture Documents
Submittal No.: 44
SUBMITTAL FORM
for APPROVAL of DRAWINGS, DOCUMENTS, SAMPLES and ETC. Date: 15-Jan-21
INFORMATION 2
ACTION CODE
TO: Prestige Bougainvillea, Noida
APPROVED A
APPROVED with B
COMMENTS
CC: M/s PDA
REJECTED C
WE ARE SENDING HERE WITH THE DRAWING / DOCUMENTS / SAMPLES LISTED BELOW.
REVIEW D
(DELETE AS NECESSARY)
Document CODE
No.
S/N Reference No. DESCRIPTION TYPE
Copies SUBMITTED for ACTION
NO. REV. (1) (2)
Comments
Email dated Refer Comments in
1 Soft copy JMC/PRE/EL/01 R4 MARKETING OFFICE LIGHT & POWER LAYOUT SD 1 B
15.01.2021 Drawing
Email dated Give Printable
2 Soft copy JMC/PRE/EL/01 R4 MARKETING OFFICE LIGHT & POWER LAYOUT SLD SD 1 C
15.01.2021 drawing
Email dated Refer Comments in
3 Soft copy JMC/PRE/EL/01 R4 MARKETING OFFICE LIGHT & POWER CONDUIT LAYOUT SD 1 B
15.01.2021 Drawing
Email dated Refer Comments in
4 Soft copy JMC/PRE/EL/01 R4 MARKETING OFFICE LIGHT EMERGENCY CONDUIT LAYOUT SD 1 B
15.01.2021 Drawing
Email dated Refer Comments in
5 Soft copy JMC/PRE/EL/01 R4 MARKETING OFFICE LIGHT & POWER UPS CONDUIT LAYOUT SD 1 B
15.01.2021 Drawing
Email dated MARKETING OFFICE LIGHT & POWER UNDER FLOOR CONDUIT Refer Comments in
6 Soft copy JMC/PRE/EL/01 R4
LAYOUT
SD 1 B
15.01.2021 Drawing
Email dated MARKETING OFFICE LIGHT & POWER UNDER FLOOR CONDUIT Duplicate item pls
7 Soft copy JMC/PRE/EL/01 R4
LAYOUT
SD 1 C
15.01.2021 check
Email dated
8 Soft copy JMC/PRE/EL/01 R4 MARKETING OFFICE LIGHT & POWER DIMENSION LAYOUT SD 1 B
15.01.2021
Email dated
9 Soft copy JMC/PRE/EL/01 R4 MARKETING OFFICE ELEVATION LAYOUT SD 1 B
15.01.2021
Consultant to enter Action Codes and Remarks, and return to Contractor through the Client.
REMARKS:
NOTE: Correction or comments made relative to submittals during this review DO NOT relieve the contractor from compliance with the requirements of drawings and specifications. This check is only for review of
general conformance with design concept of the project and general compliance with the information given in the contract documents. The contractor is responsible for confirming and correlating all quantities and
dimensions slecting fabrication processes and techniques of construction; coordinating his work with that of other trades, and performing his work in a safe and satisfactory manner.
COPIES: CONTRACTOR SUBMITTED BY DATE
(1) Code to be entered by Contractor * TYPE: SD - Shop Drawings GT - Guarantee / Warrantee MD - Manufacturer's Data SM - Sample
TI - Test / Inspection CA - Calculation CT - Certificates MS - Method Statement
(2) Code to be entered by Consultant or Client SC - Schedule RP - Report OT - Others