This report was run on: Jul 06, 2022 01:10:33 AM with the following parameters Parent Asset: "All" Maintenance Type: "All" Assets Code Description Schedule Description Status Time Est Hours Electric Stacker (TMF-RD-ES), Inverter SM7 weekly calibration needed Every 18 hour(s) Active 663.00 Generator (TMF-RD-IG), Machine Press (TMF- RD-MP), Multimedia Projector (TMF-HO-BR), Split Heating and Cooling Pump (TMF-HO-AO- SSHP) Task Description Assigned to Time Est Hours Group Name Nesting Multiplier (labor) Test User 1.00 Check drive belt tension 1.00 Motor Weekly Inspection Realign the motor 1.50 Motor Weekly Inspection (labor) Test User Realign the motor 1.00 Separator Weekly PM Checklist (labor) Test User 600.00 Grease the motor bearings 0.75 Separator Weekly PM Checklist Grease the shaft bearings 2.00 Separator Weekly PM Checklist (labor) Test User 2.00 Change oil 0.20 Generator Maintenance Change plug and filters every 200 ph 0.20 Generator Maintenance (labor) Test User 2.00 Check batter Charge 0.10 Generator Maintenance Restart generator every 30 days and allow it to run for a few minutes. 0.50 Generator Maintenance (labor) Test User 4.00 (labor) Test User 8.00 (labor) Test User 6.00 Grease the bearings 2.00 Centrifuge Annual PM Checklist Check for damage 0.50 Centrifuge Annual PM Checklist Replace seals 0.50 Centrifuge Annual PM Checklist General wipedown of system 0.50 Centrifuge Annual PM Checklist (labor) Michael 1.00 (labor) Test User (labor) Tech 4.00 (labor) Randy Test 1.00 (labor) Test User (labor) Test User (labor) Michael (labor) Test User 5.00 (labor) Test User Open each hatch and inspect teeth for misalignment 0.50 Dryer Monthly PM Checklist General wipedown of system 1.00 Dryer Monthly PM Checklist Grease the motor bearings 0.25 Dryer Monthly PM Checklist Clean the rollers 1.00 Extractor Daily PM Grease the bearings 1.50 Extractor Daily PM (labor) Test User Change oil 0.20 Generator Maintenance Change plug and filters every 200 ph 0.20 Generator Maintenance Check batter Charge 0.10 Generator Maintenance Restart generator every 30 days and allow it to run for a few minutes. 0.50 Generator Maintenance (labor) Tech 3.00 General wipedown of system 1.75 Separator Monthly PM Checklist Check drive belt tension 1.00 Motor Weekly Inspection Grease the motor bearings 0.75 Separator Monthly PM Checklist (labor) Test User - Spanish 2.00 Realign the motor 1.50 Motor Weekly Inspection Grease the shaft bearings 2.00 Separator Monthly PM Checklist (labor) Test User 1.00