Professional Documents
Culture Documents
ANSWER
Chutchai Phromngam
Authorized Inspector & Supervisor
Line ID: cphromngam
cphromngam@eagle.org
FIG-1
Cont’d
ANSWER
2/10
Cont’d
Shell thickness 50 mm.
FIG-2
QUIZ: ASME AND NBIC CODE KNOWLEDGE ISSUE 363
QUIZ: ASME AND NBIC CODE KNOWLEDGE ISSUE 363
FIG-3 Temporary attachments for
ANSWER field site assembly,
Cont’d Mat’l SA-516 Gr 485, Thickness 25 mm.
4/10
Vessel Design Data:
Background:
Qualifying a WPS to be using for temporary attachment weld to shell plate [see page 3 and 4] by coupon
used plate mat’l SA-516 Gr 485 (nomalized) with T=25 mm welding to mat’l SA-537 Cl2 (quenched and
tempered) with T=25 mm. The coupon was Two-Sided Weld, and PWHT is no performed.
ANSWER
SMAW process used with electrode E-8018-C1. Cont’d
5/10
By using information provided on page no. 2 through page no.5 above, what minimum set of weld metal
impact specimens and HAZ impact specimens are required to compliance with the ASME Section VIII
Div.2 Edition 2021 requirements?
C. 1 set of weld metal, 1 set of HAZ for mat’l SA-516, and 1 set of HAZ for mat’l SA-537.
D. 2 set of weld metal, 2 set of HAZ for mat’l SA-516, and 2 set of HAZ for mat’l SA-537.
E. None of above.
ANSWER
Cont’d
Reference Code para: 1 set of weld metal, 2 set of HAZ for mat’l SA-516, and 2 set of HAZ for mat’l SA-537 6/10
Solution
Cont’d
ANSWER
7/10
Cont’d
ANSWER
8/10
Cont’d
ANSWER
9/10
ANSWER
10/10