Professional Documents
Culture Documents
ANSWER
Chutchai Phromngam
Authorized Inspector & Supervisor
Line ID: cphromngam
cphromngam@eagle.org
Shell-and-Tube Heat Exchanger Design Data
Construction Code : ASME Sect VIII Div-1(E2021) + API 660 (9TH ED) and TEMA CLASS “R” (10TH 2019 ED)
Material used
ANSWER
Cont’d
3/7
QUIZ: ASME AND NBIC CODE KNOWLEDGE ISSUE 432
ANSWER
Cont’d
Post-forming heat treatment zone
4/7
In the fabrication of U-bundle heat exchangers, it has required by Used to stress relieve the
stainless steel tubes at U-bend area (see detail on page 3) after forming. Since this post-forming
heat treatment is carried out at temperature greater than of 1040˚C, to compliance with
requirements of ASME SC-VIII.1, tubes material are required to impact test per UHA-51(c)?
B. No
ANSWER
Cont’d
Reference Code para: UHA-51, when charpy specimen has a width along the notch less than 2.5 mm, and UHA-51(c)(1). 5/7
Solution
Cont’d
ANSWER
6/7
ANSWER
7/7