Professional Documents
Culture Documents
Chutchai Phromngam
Authorized Inspector & Supervisor
Line ID: cphromngam
cphromngam@eagle.org
FIG-1
Cont’d
2/6
PWHT : Yes [Required by construction iaw paragraph 6.4.2 and Table 6.8 of ASME VIII.2
Background:
Qualifying a WPS to be using for butt weld shell plate [see Fig-2] by coupon used plates mat’l SA-537 Cl2
(quenched and tempered) with T=42 mm. The coupon was one-Sided Weld, with GTAW, SMAW and SAW
process and PWHT performed.
Cont’d
Note: See detail of test coupon at Fig-3. 5/6
By using information provided on page no. 3 through page no.5 above, what minimum set of weld metal
impact specimens and HAZ impact specimens are required to compliance with the ASME Section VIII
Div.2 Edition 2021 requirements?
D. 3 set of weld metal[each of GTAW/SMAW/SAW] and 6 set of HAZ [ 2set for each of GTAW/SMAW/SAW ].
E. None of above.