Professional Documents
Culture Documents
PART NUMBERS
260650-101
260902-101
260902-102
262325-101
262902-101
262902-102
PAGE ISSUE
NUMBER DATE
Q
1981, by TOTCO, All Rights Reserved
A
INSTRUCTION MANUAL 26-73
---- -~
INSTRUCTION MANUAL 26-73
INSTRUCTION MANUAL 26-73 1
TABLE OF CONTENTS
TABLE OF CONTENTS
Section Page
’ _ LIST
~~ -- OF ILLUSTRATltiNS~ :
ii
Figure Title Page
iv
INSTRUCTION MANUAL 26-73
SECTION I
INTRODUCTION
l-l INTRODUCTION
l-2 This manual contains an illustrated parts breakdown for the Three- and
Four-Pen Drilling Recorder manufactured by TOTCO.
l-3 This section describes how to use the GROUP ASSEMBLY PARTS LIST, NUMERICAL
INDEX (when included), and other related information.
l-5 The GROUP ASSEMBLY PARTS LIST section (See Figures 2-1 and subsequent) in-
cludes detailed or exploded views accompanied by parts lists keyed to the
index numbers on the illustrations. Index numbers on the illustration are circled
if the component or subassembly is broken down by a subsequent detail illustration
and parts list. Each assembly is listed in its disassembly order. Part descrip-
tions show a relationship to an assembly by indentation. The relationship of a
part to the next higher assembly (NHA) or main group may also be shown by cross-
reference notes. Attaching parts immediately follow the items they attach and
are identified by (AP) following the description. Attaching parts indent to the
same level as the items attached.
l-6 FIGURE AND INDEX NUMBER COLUMN. Three groups of digits separated by dashes
make up this column (i.e. X-X-XX). The first two groups represent the
figure number of the corresponding illustration. The last group of digits is the
index number of each part found in the illustration. An asterisk ($c) instead of
an index number indicates the part is not illustrated.
l-7 PART NUMBER COLUMN. This column lists TOTCO part numbers and standard
items. The entry STD HDW in this column identifies hardware without an
assigned part number and indicates availability from commercial sources. Infor-
mation for purchase of these items is contained in the DESCRIPTION column.
l-8 DESCRIPTION COLUMN. This column describes each assembly, its attaching
parts, and detail parts of the assembly. Indentation shows relationship
of parts to the assembly. Parts identified with (AP) are attaching parts for
items and assemblies. Where it is impractical to show completely in one illustra-
tion all detail parts of any one subassembly, the subassembly is illustrated
completely assembled as part of one illustration and a separate, disassembled
view of the subassembly is furnished. A notation in parentheses following a
d&scription cross-refers a subassembly to its illustration or refers to the figure
and index number of the subassembly on the NHA illustration.
l-9 Listed parts are indented to indicate item relationship to the NHA. The
description of each assembly is followed in the list (except for attaching
parts) by its detail parts indented one column to the right (See 4, Figure l-l).
To determine the NHA of a part or assembly, note the column in which the first word
_, of the nomenclature appears. The first item directly above which appears one column
to the left (except for attaching parts) is the NHA.
l-l
INSTRUCTION MANUAL 26-73
,1 Figure number.
II
accompanying parts list. Index numbers in parts
list are assigned in disassembly order. An /
asterisk indicates that a part is not illustrated.
TCO 815-06212)w811 .
1 Locate the system or top assembly (end item) 4 Locate the required part on the detail illustra-
illustration. / tion and note the index number asslgned to the
part
\
3 Use the associated parts list (the FIGURE
number on the illustration and the parts list
must match) to find the detail illustration that
has a breakdown of the applicable component
or subassembly.
x0 81%05213115/811
l-4
INSTRUCTION MANUAL26-73
l-10 UNITS PER ASSEMBLY COLUMN. This column lists the number of units required
for one MIA. Therefore, the quantities specified are not necessarily the
total number used per installation or end item. AR denotes that parts should be
selected as required. The term REF denotes parts which are listed for reference
purposes. Units per assembly for other REF items are shown on the appropriate
figures referenced in the DESCRIPTION column. NP denotes parts not procurable.
1-11 USE ON CODE COLUMN. Code letters in this column show variations in parts
on two or more similar assemblies. Parts peculiar to a particular assembly
are identified by the same code letter as the main assembly; common parts are un-
coded.
l-13 The NUMERICAL INDEX section contains a numerical listing of parts and/or
drawings that are listed in the GROUP ASSEMBLY PARTS LIST. Standard
hardware items are not included.
l-15 Additional informative lists, such as a SPARE PARTS LIST and FUSE LIST,
follow the GROUP ASSEMBLY PARTS LIST section or NUMERICAL INDEX section
(as applicable).
l-16
___-___-_. HOW TO USE THE ILLUSTRATED PARTS BREAKDOWN
l-17 If the part number of an item is known, turn to the NUMERICAL INDEX and
find the applicable figure and index number. Use the figure and index
number to locate the illustration and description of the part in the GROUP ASSEMBLY
PARTS LIST.
l-18 If the part number of an item is unknown, turn to the system or top assembly
illustration (usually the first illustration in the GROUP ASSEMBLY PARTS
LIST). Trace back through the applicable component or subassembly detail illustra-
tions to locate the one in which the required item appears and is identified with
an index number. When the correct illustration has been located, use the FIGURE
number of that illustration to find the corresponding parts list. Use the index
number of the required item (assigned in the corresponding illustration) to locate
the item in the parts list.
l-5
INSTRUCTION MANUAL 26-73
SECTION II
SECTION PARTS
GROUP ASSEMBLY II LIST
’ GRQIJP ASSEMB1.Y PARTS I.IST I
2-o
*
INSTRUCTION MANUAL26-73
2-l
INSTRUCTION MANUAL 26-73
INSTRUCTION MANUAL 26-73
2-3
INSTRUCTION MANUAL 26-73
2-4
INSTRUCTION MANUAL 26-73
2-5
INSTRUCTION MANUAL 26-73
2-6
INSTRUCTION MANUAL 26-73
1 1 1
1 1 1
1 1 1
1 1
1 1
1 1 1
1 1
1 1
1 1 1
1 1 1
2-7
.
/
1.I 4
26 73’3
2-8
INSTRUCTION MANUAL 26-73
2-9
INSTRUCTION MANUAL 26-73
2-10
INSTRUCTION MANUAL 26-73
2-l 1
INSTRUCTION MANUAL 26-73
I
/ 35 I
16
I’ ,
/
20
I--‘iI
41 ’
40
42
P
Jb
G
\
I
I I
I
-
\ i
&- 32
J
FIGURE 2-3. DIAPHRAGM ASSEMBLY
2-12
INSTRUCTION MANUAL 26-73
__-
-Fm& UNITS USE
INDEX DESCRIPTION PER ON
NO. PART NUMBER
~_~ 1234567
___._ --~_~-~-_.-_------~-~--~~~~~-~~~~~-~~---~~---~ ASSY
..------ CODE
2-13
INSTRUCTION MANUAL 26-73
2-14
INSTRUCTION MANUAL 26-73
2-15
INSTRUCTION MANUAL 26-73
-A-
13
‘.
2-16
INSTRUCTION MANUAL 26-73
2-17
INSTRUCTION MANUAL26-73
1 14
64
d
13 7
12
b \ \ x?
I
11
2-18
INSTRUCTION MANUAL 26-73
2-19
INSTRUCTION MANUAL 26-73
INSTRUCTION MANUAL 26-73
** Use with Type EB sensator for deadline loads between 35,000 and 50,000 lbs
(15,680 and 22,400 daN; 15,909 and 22,727 kg).
*** Use with Type EB sensator for deadline loads between 55,000 and 100,000 lbs
(24,640 and 448,000 daN; 25,000 and 45,455 kg).
2-21
INSTRUCTION MANUAL 26-73
2-22
INSTRUCTION MANUAL 26-73
2-23
INSTRUCTION MANUAL 26-73
** Replaces 261280-101
2-24
INSTRUCTION MANUAL 26-73
2-25
INSTRUCTION MANUAL 26-73
:. .’ _I,._
,;.. :, I,_’
2-26
.
2-27
INSTRUCTION MANUAL 26-73
2-28
INSTRUCTION MANUAL26-73
\ \
2-29
INSTRUCTION MANUAL 26-73
2-30
INSTRUCTION MANUAL 26-73
2-3 1
INSTRUCTION MANUAL 26-73
2-32
INSTRUCTION MANUAL 26-73
2-33
INSTRUCTION MANUAL 26-73
-----.
\ \
\
\--
/’
SINGLE TACHOMETER GENERATOR SYSTEM
RIGHT-ANGLE DRIVE
/
2-34
INSTRUCTION MANUAL 26-73
2-35
INSTRUCTION MANUAL 26-73
2-36
INSTRUCTION MANUAL 26-73
2-37
INSTRUCTION MANUAL 26-73
2673113
-
2-38
INSTRUCTION MANUAL 26-73
2-39
INSTRUCTION MANUAL 26-73
FIGURE 2-13. RPM, PUMP RATE AND ELECTRIC TORQUE CYLINDER ASSEMBLY
2-40
INSTRUCTION MANUAL 26-73
2-41
INSTRUCTION MANUAL 26-73
2-42
INSTRUCTION MANUAL 26-73
2-43
01 I
\
CL-91 'Wl-iNVId NOILXlXLSNI
St/-Z
t100-6Z90f6 8Z-
QOO-TZ90L6 LZ-
SOT-OSOO9Z
ZTO-TZ90L6 9z-
CZO-S9T896 sz-
SOO-TZ90L6 ‘IZ-
TOO-LfiL9f6 EZ-
C$O-009896 zz-
TTET9Z TZ-
9S?T9Z oz-
TOT-TKT9Z
8TO-WT896 6T-
600~Et/Z666 8T-
ZECT9Z LT-
f CET9Z 9T-
ECCT9Z ST-
9TCT9Z +7T-
8TET9Z CT-
f TCT9Z ZT-
6TS09Z TT-
TOE-tlTCT9Z OT-
600-E9Z666 6-
ZTET9Z 8-
MCTH(ILLS f-
OZET9Z 9-
ZZET9Z S-
tl$ZT9Z +7-
M(IH CLLS c-
f T9Z9Z Z-
TZCT9Z T-
ZOT-OCCT9Z
TOT-OCET9Z -ST-Z
--
3ao3 ISSV f9SfiEZT X3B4flN JXVd ‘ON
NO B3d NOILdIXX3a X3aNI
39-l SL1NL-l 9 3xll31d
EL-9Z ?VIlNVM NOLTXMLSNI
9+7-z
'BNV?g L.d3? ATiVNOIdN33NI 33Vd SIHL
EL-9Z TVnNVM NOIL3l-lXLSNI
ftl-z
(71 30 T 7=x8 ;LINn anbao& mu,3373 l 9r-z 3m3Id
I
I @
\
\
\
\
\
EL-9Z ?VnNW NOIXXlXLSNI
INSTRUCTION MANUAL26-73
1
I’
/ I
---
/ I
I-
2-48
INSTRUCTION MANUAL 26-73
2-49
INSTRUCTION MANUAL 26-73
2-50
INSTRUCTION MANUAL 26-73
2-17- 261375-101 SHUNT BOX ASSY, Electric torque (for ... .REF A
1.219/1.438 dia cable) (See 2,
Figure 2-16 for NHA)
263175-102 SHUNT BOX ASSY, Electric torque (for ... .REF B
1.438/1.875 dia cable) (See 2,
Figure 2-16 for NHA)
-1 949822-005 . CONNECTOR, Watertight, l-1/2" ...... .2 A
949822-006 . CONNECTOR, Watertight, 2" ........ .2 B
-2 979439-015 . O-RING ................. . 2
-3 948108-006 . LOCKNUT (AP) .............. .2 A
948108-007 LOCKNUT (AP) . . .2 B
-4 STD HDW : BOLT, Hex hd, ;/;-;4'x'3;4: is; ;A;)' . . .2
-5 999310-015 . WASHER, Flat, 3/8, sst (AP) ....... .2
-6 999321-008 . LOCKWASHER, 3/8, sst (AP) ........ . 2
-7 950807-008 . LUG, Cable (for 500,000 to 750,000 ... . 2
circ mil cable)
-8 STD HDW . NUT, Hex, heavy, l/2-13, sst (AP) .... . 2
-9 STD HDW . LOCKWASHER, l/2, sst (AP) ........ .2
-10 999310-019 . WASHER, Flat, l/2, sst (AP) ....... . 4
-11 STD HDW . BOLT, Hex hd, l/2-13 x l-3/4, sst (AP) . .2
-12 935624-005 . SHUNT, l,OOOA, 100 mV ...... .l
-12A STD HDW . SCREW, No 8-32 x 5/16, b;ais: ...... .REF
-13 STD HDW . SCREW, Bind hd, No 8-32 x 5/8 ...... .2
-14 999310-006 . WASHER, Flat, No 8. ........... . 2
-15 STD HDW . LOCKWASHER, No 8. ............ .2
-16 261383-302 . BASE, Shunt ............... . 1
-17 261383-301 . BASE, Shunt ............... .l
-18 955701-012 . CONNECTOR, Watertight, l/2" ....... . 1
-19 979447-016 .O-RING .................. . 1
-20 948108-002 . LOCKNUT (AP) ...... .2
-21 999212 . DECAL, 'DANGER'H;G; ;O;TiG;" ...... . 1
-22 261376-1 . BOX ASSY, Shunt ............. .l A
261376-2 . BOX ASSY, Shunt ............. .l B
2-51
INSTRUCTION MANUAL 26-73
31
I 30
ill
2-52
INSTRUCTION MANUAL 26-73
2-53
INSTRUCTION MANUAL 26-73
2-19- 260733-101 VALVE & BRACKET ASSY, Remote control air . .REF A
(See 16, Figure 2-l for NHA)
260733-102 VALVE & BRACKET ASSY, Remote control air . .REF B
(See 16, Figure 2-l for NHA)
-1 STD HDW . NUT, Hex, l/4-20UNC, sst (AP) . . . . . . . 3
-2 STD HDW . LOCKWASHER, Split, l/4, sst (AP) . . . . . 3
-3 STD HDW . SCREW, Machine, l/4-20UNC x 1, sst (AP) . . 3
-4 971152-008 . CONNECTOR, Male, 5/16-45' flared . . . . . 2 A
971156-002 . CONNECTOR, Male, l/4 NPT tube to . . . . . 2 B
l/4 NPT
-5 260737-301 . LABEL, "ON-OFF" . . . . . . . . . . . . . . 1
-6 976736-001 . VALVE ASSY, 2-way selector . . . . . . . . 1
-7 STD HDW . NUT, Hex, l/4-20UNC, sst (AP) . . . . . . . 4
-8 STD HDW . LOCKWASHER, Split, l/4, sst (AP) . . . . . 4
-9 STD HDW . SCREW, Machine, hex hd, . . . . . . . . . . 4
l/4-20UNC x 1, sst (AP)
-10 260734 . BRACKET, Mounting, valve. . . . . . . . . . 1
-11 260748-301 . PLATE, Identification . . . . . . . . . . . 1 A
260748-302 . PLATE, Identification . . . . . . . . . . . 1 B
2-54
INSTRUCTION MANUAL 26-73
2-55
INSTRUCTION MANUAL 26-73
f!
22
2673,m
2-56
INSTRUCTION MANUAL 26-73
2-57
INSTRUCTION MANUAL 26-73
2-58
INSTRUCTION MANUAL 26-73
2-20-39 STD HDW . . BOLT, Hex hd, l/2-13 x l-1/2, sst (AP) . 4
-40 999310-019 . . WASHER, Flat, l/2, sst (AP) . . . . . . . 4
-41 260432 . . UPRIGHT ASSY, Long wall mount, LH . . . . 1
-42 260431 . . UPRIGHT ASSY, Long wall mount, RH . . . . 1
2-59
INSTRUCTION MANUAL 26-73
RECORDER
CHANNEL 1 2 3
260 124 X X X X
260125 X X X X
260144 X X X X
260 145 X X X X
RECORDER
CHANNEL 1 2 3
260 129 X X X X
260 138 X X X X
260148 X X X X
2-60
INSTRUCTION MANUAL 26-73
RECORDER
CHANNEL 1 2 3
TIME
CHART SCALE TYPE OF SENSING &
PART NO. (HRS > WEIGHT (1000 DAN) PENETRATION FLUID PRESSURE,
PUMP STROKES,
DIAPHRAGM SENSATOR TORQUE,
RPM,
% MUD FLOW,
12 24 180/360 & 540/720 180/360 & 540/720 % PIT LEVEL
260193 X X X X
260194 X X X X
260195 X X X X
260196 X X X X
2-61
INSTRUCTION MANUAL 26-73
..
1.’
2-62
INSTRUCTION MANUAL 26-73
2-63
INSTRUCTION MANUAL 26-73
2-64
INSTRUCTION MANUAL 26-73
2-21-39 STD HDW . . BOLT, Hex hd, l/2-13 x l-1/2, sst (AP) . 4
-40 999310-019 . . WASHER, Flat, l/2, sst (AP) . . . . . . . 4
-41 260432 . . UPRIGHT ASSY, Long wall mount, LH . . . . 1
-42 260431 . . UPRIGHT ASSY, Long wall mount, RH . . . . 1
RECORDER
CHANNEL 1 2 3&4
262124 X
262125 X
262144 X
262145 X
2-65
INSTRUCTION MANUAL 26-73
RECORDER
CHANNEL 1 2 3** 4**
TIME
CHART SCALE TYPE OF SENSING &
PART NO. (HRS) WEIGHT (1000 KG) PENETRATION A B C B
12 24 180 180/360
262128 X X X X X
262150 x X X X X
RECORDER
CHANNEL 1 2 3&4
TIME
CHART SCALE TYPE OF SENSING &
PART NO. (HRS) WEIGHT (1000 DAN) PENETRATION FLUID PRESSURE,
PUMP STROKES,
DIAPHRAGM SENSATOR TORQUE,
RPM,
% MUD FLOW,
12 24 180/360 & 180/360 & % PIT LEVEL
540/720 540/720
262126 X X X X
262193 X X X X
262195 X X X X
262196 X X X X
I
2-66
INSTRUCTION MANUAL 26-73
2-67
INSTRUCTION MANUAL 26-73
2-68
INSTRUCTION MANUAL 26-73
2-69
INSTRUCTION MANUAL 26-73
2-70
INSTRUCTION MANUAL 26-73
2-71
INSTRUCTION MANUAL 26-73
,-
/
I' 4.5
2-72
INSTRUCTION MANUAL 26-73
2-73
INSTRUCTION MANUAL 26-73
2-74
INSTRUCTION MANUAL 26-73
2-75
INSTRUCTION MANUAL26-73
5-
0
4
FIGURE 2-28. AIR MOTORREGULATORASSEMBLY
2-76
INSTRUCTION MANUAL 26-73
2-77
INSTRUCTION MANUAL 26-73
//
/
/’
2-78
INSTRUCTION MANUAL 26-73
2-29- 260594-101 OILER ASSY, Air motor (See 10, Figure 2-27 . REF
for NHA)
-1 261196 . LABEL, "TOTCO REGULATOR AND OILER" .... 1
972313-001 . LUBRICATOR 1
-2 .. RING ASSY, Clamp (Wilkerson) (not ... 1
normally replaced)
-3 + .. O-RING ................. 1
GRP-95-613 .. BOWL ASSY (Wilkerson) ......... 1
-4 972313-018 ... BOWL, Metal ............. 1
-5 GRP-95-705 ... GAUGE, Sight (Wilkerson) ....... 1
-6 ... DRAIN COCK (Wilkerson) ........ 1
-7 LRP-96-137 .. TUBE ASSY, Siphon (Wilkerson) ..... 1
-8 972313-023+ .. O-RING ................. 1
-9 LRP-30-415 .. ADAPTER (Wilkerson). .......... 1
-10 LRP-40-004 .. BALL (Wilkerson) ............ 1
-11 972313-027 .. FLOW GUIDE ............... 1
-12 .. SCREW, Flow guide (Wilkerson) ..... 1
-13 .. TUBE, Spacer (Wilkerson) ........ 1
-14 972313-013 .. SCREW, Adjustment ........... 1
-15 972313-023+ .. O-RING ................. 1
-16 972313-002** .. DOME, Sight .............. 1
-17 972313-022**/+. . O-RING . . . . . . . . . . . . . . . . . 2
-18 . . FILL PLUG (Wilkerson) . . . . . . . . . 1
-19 + . . O-RING (Wilkerson) . . . . . . . . . . . 1
-20 GRP-49-023 . . CHECK VALVE (Wilkerson) . . . . . . . . 1
-21 . . BODY ASSY (Wilkerson) (not normally . . 1
replaced separately)
972313-012 KIT, Repair, dome. . . . . . . . . . . . . . REF
972313-011 KIT, Repair, o-ring. . . . . . . . . . . . . REF
2-79
INSTRUCTION MANUAL 26-73
SEE DEiAlL C
2-80
INSTRUCTION MANUAL 26-73
30
31
46 41 \45
2-81
INSTRUCTION MANUAL 26-73
57-9
/
/
/
/
DETAIL A
2-82
INSTRUCTION MANUAL26-73
66
DETAIL C
2-83
INSTRUCTION MANUAL 26-73
2-84
INSTRUCTION MANUAL 26-73
2-85
INSTRUCTION MANUAL 26-73
2-86
INSTRUCTION MANUAL 26-73
2-30-82 STD HDW . . SCREW, Sot hd, l/4-20 x 3/8, sst (AP) . . 2
-83 999216-015 .. WASHER ................. .
-84 262254-101 .. BEARING ASSY, On-off lever ....... 1
(press fit assy)
-85 STD HDW . . SCREW, Sot hd, No lo-24 x 3/8, sst (AP) . 3
-86 260955 .. LINK, Clutch shaft to penetration .... 1
pen arm
-87 982600-013 .. COLLAR, Shaft (includes setscrew) .... 1
-88 260956 .. ANCHOR ................. .
-89 STD HDW .. NUT, Hex, No 10-32, sst (AP). ...... 1
-90 260257 .. COLLAR ................. .
-91 STD HDW .. SETSCREW, Cup pt, sot hd, ........ 1
No lo-32 x 5/16 (AP)
-92 260266 .. SPRING ................ ..l
-93 260722-301 .. LEVER, Remote control ......... .l
-94 STD HDW .. SETSCREW, Cup pt, sot hd, ....... .2
No lo-32 x 5/16 (AP)
-95 260260-301 .. CAM, Clutch .............. .l
-96 999290-011 .. PIN, Spring (AP) ............ .l
-97 260251 .. SHAFT, Clutch ............. .l
-98 260242 .. BUTTON ASSY, Release, top cover .... .l
-99 999246-010 .. PIN, Spring .............. .l
-100 260243 .. SPRING,Release ............. .
-101 264120-301 .. PLATE, Nomenclature-on/off, English .. .l C
264120-302 .. PLATE, Nomenclature-on/off, Metric ... .l D
264120-303 .. PLATE, Nomenclature-on/off, SI ..... .l E
-102 STD HDW . . SCREW, Bind hd, No 8-32 x 3/8, sst (AP). .4
-103 260728 .. LABEL, Instruction ........... .l
-104 260916-301 .. SEAL, Channel, LH ........... .l
-105 260916-302 .. SEAL, Channel, RH ........... .l
-106 STD HDW .. SCREW, Hex hd, 1/2-13x1, sst ...... .4
-107 260904-101 .. HOUSING ASSY, Recorder, English/S1 ... .l C,E
(See Figure 2-44 for breakdown)
260904-102 .. HOUSING ASSY, Recorder Metric ..... .l D
(See Figure 2-44 for breakdown)
2-87
INSTRUCTION MANUAL26-73
SEE DETAIL C
2-88
INSTRUCTION MANUAL 26-73
2-89
INSTRUCTION MANUAL 26-73
61
‘>
DETAIL A
66
DETAIL C
2-91
INSTRUCTION MANUAL 26-73
2-92
INSTRUCTION MANUAL 26-73
2-93
INSTRUCTION MANUAL 26-73
2-31-44 STD HDW . . SCREW, Sot hd, l/4-20 x 5/8, sst (AP). . 4
-45 970615-003 .. TUBING, Black nylon .......... AR
-46 968605-005 .. ELBOW,Female ............. 1
-47 971132-004 .. CONNECTOR, Bulkhead .......... 1
-48 260801-101 . . CYLINDER ASSY, Air (See Figure 2-43 . . 1
for breakdown)
-49 STD HDW .. NUT, Hex, l/4-20, sst (AP) ....... 2
-50 STD HDW .. LOCKWASHER, Split, l/4, sst (AP) .... 2
-51 STD HDW . . SCREW, Hex hd, l/4-20 x 3/4, sst (AP) . 2
-52 999275-003 .. PLUG, Button .............. 1
-53 260288 .. COVER, Pulley, English ......... 1 C
260426 .. COVER, Pulley, Metric ......... 1 D
260189 .. COVER, Pulley, SI ........... 1 E
-54 STD HDW . . SCREW, Hex hd, l/4-20 x 2-l/4, sst (AP). 3
-55 STD HDW .. LOCKWASHER, Split, l/4, sst (AP) .... 3
-56 265163-301 .. PULLEY, Measuring, English ....... 2 C
265163-302 .. PULLEY, Measuring, Metric ....... 2 D
265163-305 .. PULLEY, Measuring, SI ......... 2 E
-57 999290-015 .. PIN, Spring (AP) ............ 2
-58 260277 .. SPACER ................. 2
-59 999290-009 .. PIN, Spring .............. 1
-60 999216-015 .. WASHER ................. 2
-61 265313-301 .. SHAFT, Measuring pulley ........ 1
-62 262275 .. HOUSING, Bearing ............ 2
-63 STD HDW . . SCREW, Sot hd, l/4-20 x 5/8, sst (AP) . 6
-64 985818-003 .. BEARING ................ 4
-65 260273 .. SPACER, Bearing housing ........ 2
260927-101 . . FLANGE ASSY, Lower measuring pulley . . 1
(inseparable)
-66 265313-301 ... SHAFT, Pulley (press fit assy) .... 1
-67 265314 ... FLANGE ................ 1
-68 260278 ... FACING, Clutch (bonded to item 67) .. 1
-69 260452-101 .. BRACKET ASSY, Guide tube, English ... 1
(welded assy)
260452-102 .. BRACKET ASSY, Guide tube, Metric .... 1
(welded assy)
260452-103 .. BRACKET ASSY, Guide tube, SI ...... 1
-70 STD HDW . . SCREW, Sot hd, 3/8-16 x 3/4, sst (AP) . 4
-71 262219 .. BRACKET, Penetration counter ...... 1
-72 STD HDW . . SCREW, Sot hd, l/4-20 x 5/8, sst (AP) . . 2
260261 .. LEVER ASSY, Clutch ........... 1
-73 STD HDW . . SCREW, Sot hd, l/4-20 x 7/8, sst (AP) . . 2
-74 999310-012 .. WASHER, Flat (AP) ............ 2
-75 999254-018 ... RING, Retaining ............ 2
-76 260263 ... SHAFT, Bracket ............ 1
-77 260252-101 ... LEVER ASSY, Clutch (press fit assy) .. 1
-78 260262 ... BRACKET, Clutch lever ......... 1
-79 260264 . . BEARING ASSY, clutch (press fit assy) . . 1
-80 STD HDW . . SCREW, Flat hd, No 4-40 x 3/8, sst (AP) . 3
-81 260925 .. LEVER, On-off .............. 1
-82 STD HDW . . SCREW, Sot hd, l/4-20 x 3/8, sst (AP) . . 2
-83 999216-015 .. WASHER ................. .
2-94
INSTRUCTION MANUAL 26-73
2-95
INSTRUCTION MANUAL 26-73
2-96
INSTRUCTION MANUAL 26-73
2-97
INSTRUCTION MANUAL 26-73
2-98
INSTRUCTION MANUAL 26-73
2-99
INSTRUCTION MANUAL 26-73
/’
3
/
6
2-100
I
INSTRUCTION MANUAL 26-73
2-101
INSTRUCTION MANUAL 26-73
\7
2-102
INSTRUCTION MANUAL 26-73
2-103
INSTRUCTION MANUAL 26-73
2-104
INSTRUCTION MANUAL 26-73
2-105
INSTRUCTION MANUAL 26-73
22
2-106
INSTRUCTION MANUAL 26-73
2-36- 261120-101 PEN ARM ASSY, Weight (See 21, ....... REF
Figure 2-30 and 21, Figure
2-31 for NHA)
-1 STD HDW . SCREW, Sot hd, No 8-32 x 3/8, sst (AP) . . 1
-2 261244 . PLUG, Nylon ............... 1
-3 STD HDW . SCREW, Hex hd, No 8-32 x 3/4, sst. .... 1
T4 STD HDW . WASHER, Flat, No 8, sst. ......... 1
-5 261122 . SPRING .................. 1
-6 261140 . HOLDER, Pen ............... 1
-7 261124 . ARM ASSY (press fit assy) ........ 1
-8 STD HDW . SCREW, Sot hd, No 5-40 x l/2, sst (AP) . . 4
-9 STD HDW . LOCKWASHER, Split, No 5, sst (AP). .... 4
-10 STD HDW . SCREW, Sot hd, No 4-40 x 3/4, sst. .... 1
-11 261132 . BUSHING ................. 1
-12 261130 . CLEVIS, Pen arm ............. 1
-13 261133-301 PLATE, Index, 6, 8 or 8, 10, 12 lines 1
-14 STD HDW : SCREW, Sot hd, No 2-56 x 3/16 (AP) ...... 2
-15 261129 . SCREW, Clamp, slider ........... 1
-16 261128 . SLIDER, Arm ............... 1
-17 261127 . KNOB, Slider ............... 1
-18 STD HDW . SETSCREW, Cup pt, No 8-32 x 3/16, sst (AP) 1
-19 261126 . LOCATOR, Slider ............. 1
-20 STD HDW . SCREW, Sot hd, No 6-32 x 3/8, sst. .... 2
-21 STD HDW . WASHER, Flat, No 6, sst. ......... 2
-22 261137 .BRIDGE,Bracket ............. 1
-23 261125 . ARM ASSY, Ratio (press fit assy) ..... 1
-24 261136 . PILLAR, Bracket ............. 2
-25 261135 . BRACKET, Penarm. ............ 1
2-107
INSTRUCTION MANUAL 26-73
2-108
INSTRUCTION MANUAL 26-73
2-38- 264111-102 RETRACTOR ASSY, Pen arm (See 27, Figure . . .REF A
2-30 for NHA)
264111-103 RETRACTOR ASSY, Pen arm (See 27, Figure . . .REF B
2-31 for NHA)
-1 260415 . COLLAR, Stop . . . . . . . . . . . . . . . 1
-2 STD HDW . SETSCREW, Sot hd, No lo-32 x l/4, sst (AP). 2
-3 260416 .HANDLE,Stop . . . . . . . . . . . . . ..l
-4 260417 . SPRING, Detent . . . . . . . . . . . . . . 1
-5 260418 . BEARING, Ball, 3/16 dia, sst. . . . . . . . 1
-6 260412-101 . BRACKET ASSY, LH (press fit assy) . . . . . 1
-7 STD HDW . SCREW, Sot hd, No lo-24 x l/2, sst (AP) . . 4
-8 STD HDW . NUT, Hex, No 10-24, sst (AP). . . . . . . . 4
-9 260414 . COLLAR, Shaft . . . . . . . . . . . . . . . 1
-10 264033 . BRACKETASSY, RH . . . . . . . . . . . . . 1
-11 264094-102 . RETRACTING ASSY . . . . . . . . . . . . . . 1
264094-103 . RETRACTING ASSY . . . . . . . . . . . . . . 1
-12 264096 . MOUNT, Name tag holder . . . . . . . . . . 2
-13 STD HDW . SETSCREW, Cone pt, No 4-40 x l/4 (AP) . . . 2
-14 STD HDW . SCREW, Flat hd, No 4-40 x l/4 (AP). . . . . 2
2-109
INSTRUCTION MANUAL 26-73
2-39- 260963-101 INDEX ASSY, Hub, English/S1 (See 29, .... REF A
Figure 2-30 and 29, Figure
2-31 for NHA)
260963-102 INDEX ASSY, Hub, Metric (See 29, ...... REF B
Figure 2-30 and 29, Figure
2-31 for NHA)
-1 999317-023 . RING, Retaining ............. 1
-2 260 940 . PENTAGON, Index, English/S1 ....... 1 A
c 260 966* . PLATE, Index, Metric ........... 1 B
-3 999290+01 . ROLLPIN (AP) ............... 1
260939 . GEAR ASSY, Index, Eng/SI (staked assy) . . 1 A
260965 . GEAR ASSY, Index, Metric (staked assy) . . 1 B
-4 260831 .. PIN.Drive ............... NP
-5 260968 .. GEAR, 120 tooth, English/S1 ...... NP A
260832 .. GEAR, 116 tooth, Metric ........ NP B
-6 260938 . SPRING, Friction ............. 1
260 937 . DISC ASSY, Index, English/S1 ....... 1 A
260830 . DISC ASSY, Index, Metric ......... 1 B
-7 260 967 .. PIN.Drive ............... 5 A
260967 .. PIN, Drive ............... 4 B
-8 260936 .. HUB, Index (press fit in item -9) ... 1
-9 260 969 .. DISC, English/S1 ............ 1 A
260 964* .. DISC, Metric .............. 1 B
260945 CAM SHAFT ASSY, Index (See 33, Figure 2-30 . REF
and 33, Figure 2-31 for NHA)
-10 260947 .CAM,Index................ 1
-11 STD HDW . SCREW, Sot hd, cap, No 8-32 x 3/4 (AP) . . 1
-12 260946 . SHAFT,Cam................ 1
-13 999276405 .ROLLPIN . . . . . . . . . . . . . . . . . 1
2-110
INSTRUCTION MANUAL 26-73
\
‘.
2-111
INSTRUCTION MANUAL 26-73
2-113
INSTRUCTION MANUAL 26-73
13
I 12
6\ v
2-114
INSTRUCTION MANUAL 26-73
2-41- 261350-101 PEN ARM AND LEVER ASSY, 3-pen recorder, . . REF
(See 43, Figure 2-30 for NHA)
261351-101 . ARMASSY, Pen . . . . . . . . . . . . . . 1
-1 STD HDW . SCREW, Sot hd, No 8-32 x l/2, sst (AP) . . 2
-2 STD HDW . WASHER, Flat, No 8, sst (AP) . . . . . . . 2
-3 STD HDW . . SCREW, Pen pressure adjust, hex hd, . . 1
sst, No 8-32 x 3/4
-4 STD HDW . . WASHER, Light, No 8, sst . . . . . . . . 1
-5 261122 . . SPRING, Pen pressure . . . . . . . . . . 1
-6 261140 . . HOLDER, Pen . . . . . . . . . . . . . . 1
-7 261338-101 . . ARM ASSY (press fit assy). . . . . . . . 1
-8 261352-101 . LEVER ASSY, Pen arm (press fit assy) . . . 1
-9 261137-304 .BRIDGE,Bracket . . . . . . . . . . . . . 1
-10 STD HDW WASHER, Flat, No 6, sst (AP) . . . . . . . 2
-11 STD JlDW : SCREW, Sot hd, No 6-32 x 3/8, sst (AP) . . 2
-12 261136 . PILLAR, Bracket . . . . . . . . . . . . . 2
-13 261135-301 . BRACKET, Pen arm. . . . . . . . . . . . . 1
2-115
INSTRUCTION MANUAL 26-73
I 12
I
15
0
26 x3,48
2-116
I
INSTRUCTION MANUAL 26-73
2-42- 262610-101 PEN ARM AND LEVER ASSY, 4-pen recorder. .. REF
(third and fourth pen positions)
(See 43, Figure 2-31 for NHA)
261351-101 . ARM ASSY, Pen .............. 2
-1 STD HDW . SCREW, Sot hd, No 8-32 x 2-l/2, sst (AP). 4
-2 STD HDW . WASHER, Flat, No 8, sst (AP). ...... 4
-3 STD HDW . . SCREW, Pen pressure adjust, hex hd, . . 1
sst, No 8-32 x 3/4
-4 STD HDW .. WASHER, Light, No 8, sst. ....... 1
-5 261122 .. SPRING, Pen pressure. ......... 1
-6 261140 .. HOLDER, Pen .............. 1
-7 261338-101 .. ARM ASSY, (press fit assy). ...... 1
264063-111 . LEVER ASSY, Pen arm (third pen. ..... 1
position)
-8 263608 .. LEVER, Pen arm. ............ 1
-9 264070-302 .. SHAFT, Pen arm. ............ 1
-10 999246-008 .. ROLLPIN ................ 1
264063-108 . LEVER ASSY, Pen arm (fourth pen ..... 1
position)
-11 263607 .. LEVER, Clevis ............. 1
-12 263608 .. LEVER, Pen arm. ............ 1
-13 264070-307 .. SHAFT, Pen arm. ............ 1
-14 999246-008 .. ROLLPIN ................ 2
-15 262613 .BRACRET ................. 1
-16 262614 .BRIDGE ................. 1
-17 STD HDW . SCREW, Sot hd, No 8-32 x 3/8, sst .... 2
-18 STD HDW . WASHER, Flat, No 8, sst ......... 2
-19 262615 . PIN, Dowel ............... 2
2-117
INSTRUCTION MANUAL 26-73
267349
i
2-118
INSTRUCTION MANUAL 26-73
2-43- 260801-101 AIR CYLINDER ASSY (See 48, Figure 2-30 ... REF
and 48, Figure 2-31 for NHA)
-1 260804 . BASE.Aircylinder ............ 1
-2 STD HDW . NUT, Hex, l/4-20, sst (AP) ........ 2
-3 STD HDW LOCKWASHER, Split, l/4, sst (AP) .. 2
-4 STD HDW : SCREW, Flat hd, l/4-20 x 2-l/8, sst (AP).... 2
-5 260803 .cAM ................... 1
-6 999243-009 .SETSCREW ................. 1
-7 968638-001 . ELBOW,Male ............... 1
978916-002 . CYLINDER ASSY .............. 1
-8 978916-015 .. TIEROD ................ 2
-9 STD HDW .. LOCKWASHER, Split, No. 10, sst ..... 2
-10 978916-016 .. HEAD,Rear ............... 1
-11 978916-011 .. GASKET, Cylinder ............ 2
-12 F153-0822 .. CYLINDER (Bellows Co.) ......... 1
-13 978916-012 .. PISTON & ROD ASSY ........... 1
-14 978916-014 .. O-RING ................. 1
-15 978916-013 .. O-RING ................. 1
-16 978916-017 .. CAP .................. 1
-17 260802 . SPRING (Color coded gray stripe) ..... 1
-18 260716-302 . SPACER, Piston rod ............ 1
2-119
INSTRUCTION MANUAL 26-73
B 63
/ 8
\
1'9 ir
2-120
INSTRUCTION MANUAL 26-73
2-121
INSTRUCTION MANUAL 26-73
I
\
‘\
3-
d0
:’ \ B
2-122
INSTRUCTION MANUAL 26-73
2-123/2-124
INSTRUCTION MANUAL 26-73
SECTION III
NUMERICAL INDEX
3-l
INSTRUCTION MANUAL 26-73
3-2
INSTRUCTION MANUAL 26-73
3-3
INSTRUCTION MANUAL 26-73
3-5
INSTRUCTION MANUAL 26-73
3-6
INSTRUCTION MANUAL 26-73
3-7
INSTRUCTION MANUAL 26-73
261401-106 2-l-3
261314-301 2-15-10 2-8-
261314-302 2-13-15 261401-107 2-1-3
261316 2-10-13 2-8-
2-13-14 261401-108 2-1-3
2-15-14 2-8-
261317 2-15-12 261401-109 2-1-3
261318 2-l-8 261401-109 2-8-
2-15-13 261412 2-1 O-8
261320 2-l O-6
261417 2-10-12
261320 2-13-11 261424-001 2-10-10
2-15-6 261424-002 2-10-10
261321 2-l o-2 261424-003 2-10-10
2-15-1 261424-004 2-10-10
261322 2-10-5 261427 2-10-12
2-13-7 261430 2-8-l
2-15-5 261430 2-9-
261330-101 2-14-2 261433 2-9-10
2-15-
261434 2-9-4
261330-102 2-14-2 261435 2-9-5
2-15- 261456 2-10-20
261331-101 2-15- 2-l 5-20
261331-102 2-10- 261512 2-13-16
261332 2-10-14 261513 2-l 3-6
2-15-17 261519-301 2-10-l 1
261333 2-10-16 261548 2-7-6
2-15-15 261549 2-7-l 4
261337 2-15-16
261734-101 2-l l-2
261338-101 2-4 l-7 2-l 2-
2-42-7 261734-102 2-1 l-2
261350-101 2-30-43 2-12-
2-4 l- 261736-301 2-1 2-4
261351-101 2-41- 261736-302 2-l 2-4
2-42- 261737 2-12-9
261352-101 2-4 l-8 261780-102 2-l l-4
261375-101 2-16-2 2-13-
261375-101 2-17- 2-16-6
3-8
INSTRUCTION MANUAL 26-73
PART NUMBER
262061
FIGURE AND
INDEX NUMBER
2-18-26
PART NUMBER
262437
FIGURE AND
INDEX NUMBER
2-21-
I
262110-101 2-16-3 262460 2-21-
2-18- 262610-101 2-3 l-43
262110-102 2-1 6-3 2-42-
2-18- 262613 2-42-15
262111 2-18-3 1 262614 2-42-16
262112 2-18-14 262615 2-42-l 9
262113 2-18-11 262616 2-13-8
262114 2-18-29 262617 2-10-2
3-9
INSTRUCTION MANUAL 26-73
3-10
INSTRUCTION MANUAL 26-73
3-12
INSTRUCTION MANUAL26-73
999304-011 2-22-2
2-22-12
999304-012 2-26-20
999304-014 2-26-l 1
999310-006 2-17-14
999310-012 2-30-38
2-30-74
2-3 1-38
2-3 l-74
999310-019 2-21-15
2-21-21
2-2 l-25
2-21-28
2-21-33
2-2 l-37
2-2 l-40
999311-001 2-3-4
999317-017 2-30-25
999324-032 2-35-l 6
999331-010 2-33-13
3-1313-14
INSTRUCTION MANUAL 26-73
SECTION IV
SPARE PARTS LIST
I SPARE PARTS LIST,
4-l GENERAL
4-2 This section contains information for parts which are recommended for
stocking as spares. Spare parts list, Table 4-1, includes back-up spare
parts and items which should be replaced during disassembly or overhaul of system
components. An inventory of readily available spare parts will reduce the loss of
equipment operating time when repairs are necessary. Table 4-l does not list
standard hardware items. Sufficient information for obtaining these items is
contained in the Group Assembly Parts List, Section II.
4-3 Customer selection of spare parts from the list in Table 4-l will vary with
equipment specifically supplied (i.e. sensors etc.) for use with the drilling
recorder. Locate and identify each recommended item in the appropriate illustration
in Section II and determine if the item should be stocked as a spare part.
4-4 Recommended spare parts for equipment associated with the drilling recorder
system are given in appropriate instruction manuals listed under RELATED
PUBLICATIONS.
FIGURE & Qm
INDEX NO. PART NUMBER DESCRIPTION USED
4-l
INSTRUCTION MANUAL 26-73
4-2