Professional Documents
Culture Documents
PM20163
PM20163
corners, if we are using the spiral on option extra material will remove same. we are using high-
speed machining and also a high-speed tool. Plz, let me know how to resolve this issue. EX: - If we
are using a Diameter 6-ball nose cutter for a radius up to 3mm there is stock left up to 60 to 80
microns.
As per the TeamViewer session, your issue is when you are using the step and shallow finishing
strategy you found that the stock is left in corners and if you are using the spiral option that time the
material is not left but the line mark is showing on the surfaces in PowerMill.
We have a good discussion on the call, and we have checked your issue. Sorry for this inconvenience
caused. You informed me that when you are using the PowerMill-2016 version you did not face this
issue and you have cleared this issue with the machine tool supplier also.
I have requested to you please send your 2016 and 2022 projects to us for further investigation.
If you need further assistance with this case, please reply to this email, and I will be happy to help
you.