Professional Documents
Culture Documents
NORTH ZONAL
ADMINISTRATION BUILDING
2018
INTRODUCTION
As a result of the workshop study, the group in which I developed this project was defined, The
area was proposed to be transformed as a new urban center, answering to a potential growth
and potential of development after the transfer of the International Airport "Mariscal Sucre" to
the outskirts of the city, the creation of the Multimodal Station "El Labrador" corresponding to
the subway system of Quito and the implementation of the city of the "Metropolitan Park
Bicentennial", who replaces the old airport. To transform it into a civic/cultural center that
promotes cultural diversity and the attention of civic and public needs of the citizens.
ARCHITECTURE
A connection with the existing building is
generated by means of a programmatic
bridge to allow an urban passage on the
first floor and generate permeability.
The existing building will be incorporated
into the project to be implemented as a
completion of the premises.
URBAN STRATEGIES PUBLIC SPACE
The accelerated growth of the city to the north begins. People from
the city Pedestrian Flow taken
to stablish points of
interest in the project.
Identity Solutions
Pedestrian flow to
cultural buiding.
1921
P
C
Calle Juan de C
azcaray
Wide: 8.80 m
blockade.
Building placement.
Highest buildable height zone (2 commerce levels + 10 housing
levels on buildings)
Architeture interevntion for civic and administration use
Building placement
N: +9.60
N: +3.8
N: +1.8
N: +/- 0.0
FRONTAL FACADE
N: +9.60
N: +1.8
N: +/- 0.0
ARCHITECTURE
NOMBRE DEL PROYECTO CONTIENE LEYENDA
ARO1060 - TITULACIÓN Administración Zonal "Eugenio Espejo"
1 - FACHADA ESTE
FACHADAS
NOMBRE ESCALA Ubicación LONGITUDINALES 2 - FACHADA OESTE
N : +7.50
Canaleta metalica para agua (ESPESOR 1CM )
Pernos de sujecion
Malla Electrosoldada
courtyard, then to highlight the Cieloraso de aluminio 6161 e=10 mm, acabado negro mate
Wind management throughout the project
Placa de vidrio laminado 6 mm
Wind speed: 8km/h
accesses and configure the geometry Estructura de Acero acabado negro mate
Facade geometry designed to capture
and distribuite wind insde.
Window openings
on the first floor and generate
N : +2.5
RAMPA DE SUBIDA
Contrapiso de supresion de impacto HC 1:3:3 (15cm espesor) Facade geometry designed to capture
and wind into the interior of the project, and distribuite wind insde.
Junta de dilatacion de poliestireno expandido de baja densidad (ESP 1 CM)
malla electrosoldada
N : 0.00
PLANTA BAJA
3/5
7/7
DETALLEDE
DETALLES
NOMBRE
NOMBRE ESCALA
ESCALA Ubicación
Ubicación CONSTRUCTIVO
FACHADA 3D COD
COD
DAVID
DAVID SEBASTIAN
SEBASTIAN BADILLO
BADILLO LARREA
LARREA Zonal
Zonal Av.Av.
LaLa
"Y""Y"
y y ARQ-ALZADOS-03
ARQ-ALZADOS-03
UNIVERSIDAD
UNIVERSIDAD DE DE
LASLAS AMERICAS
AMERICAS Juan
Juan dede Azcaray
Azcaray
FLOOR PLAN AND ARCHITECTURE CONCEPT
SECTION
The patio in its conception serves as an element of articulation since around it are the activities that are developed across each single program
and also set up the project in such a way that the climatic conditions benefit and do not affect its internal conditions, thus taking advantage of the
climatic conditions and not requiring the use of mechanic ventilation..
COMPLEMENTARY IMAGES