Professional Documents
Culture Documents
UT Blocks For NDT
UT Blocks For NDT
1 M:2020
Notes:
1 . The dimensional tolerance between all surfaces involved in referencing or calibrating shall be within ±0.1 3 mm of detailed dimension.
2. The surface finish of all surfaces to which sound is applied or reflected from shall have a maximum of 3.1 7 µm r.m.s.
3. All material shall be ASTM A36 or acoustically equivalent.
4. All holes shall have a smooth internal finish and shall be drilled 90° to the material surface.
5. Degree lines and identification markings shall be indented into the material surface so that permanent orientation can be maintained.