Professional Documents
Culture Documents
Provide Site Office for the exclusive use of Engineer’s representative as per Volume
3, Part 4:
A Establishment A211.1
B Maintenance A211.2
C Removal A211.3
Provide, supply and install project sign board as specified in general specification to
D A279.1
be installed at project site office location.
Provide, supply and install project mobile sign boards as per TPD building permits
E section standards and regulations to be shifted between different sites as per A279.2
Engineer/Client Instructions.
Provide and maintain vehicles engine capacity not less than 2600CC as per
F A 330.1
specification for the use of Engineer including the fuel (2 Nos.)
Provide and maintain one number 4WD Station Wagon vehicle of engine capacity not
G less than 2800CC as per particular specification (with driver) and including the fuel (1 A 330.2
No.)
CARRIED
PAGE NO - A/1
Provide temporary Caravans for the Employer appointed Guards for the specific sites
as instructed as per Volume 3, Part 4, Section 1.4:
DIVISION 01 - DEMOLISION
H Excavate through the Existing ground to foundation levels. E290.1 m3 1008.92 AED 18.00
Backfilling
Backfilling in layers for boundary walls foundation, buildings foundation and below
slab on grade level using suitable materials selected from excavated materials, as per
soil report recommendation and as specified.
Import fill material Sub-Grade with CBR > 30% in layers150mm thick and compact
J to 95% MDD around Exposed Existing boundary foundation to the locations as E635.1 m3 AED 57.00
directed by the Engineer.
CARRIED TO COLLECTION
AMOUNT AED
AED 57,925.00
AED 10,330.00
AED 5,273.90
AED 2,220.40
AED 18,160.56
AED 0.00
AED 0.00
93,909.86
BILL B - CIVIL PAGE NO - B/2
CESMM3
ITEM DESCRIPTION
Ref
CONTINUED
Termite Control
A Allow for Anti-Termite treatment to foundations, slabs, and 20cm perimeter areas X900.1
for guard rooms, control rooms and electrical rooms
DIVISION 03 - CONCRETE
Plain concrete (25 N/mm2) in Type II SRC cement as per including shuttering,
supports all sundries related works to complete the work as per specifications
and drawings.
H Column H900.5
I Beams H900.6
K Parapet H900.8
Roof screeds in lightweight concrete laid to falls and cross falls including
control joints.
m2 AED 3.00
m3 AED 392.00
m3 AED 1,416.00
m3 AED 1,673.00
m3 AED 1,673.00
m3 AED 1,416.00
m3 AED 1,802.00
m3 AED 1,802.00
m3 AED 3,218.00
m3 AED 2,060.00
m2 AED 35.00
CARRIED TO COLLECTION 4,094.83
BILL B - CIVIL PAGE NO - B/3
CESMM3
ITEM DESCRIPTION UNIT QUANTITY RATE AED AMOUNT AED
Ref
CONTINUED
PRECAST CONCRETE -
Supply and erect super structure Precast External wall & parapet panels for the Guard
room as per drawings and to the following :
Wall & parapet panels height : 420cm
Wall & parapet panels perimeter : 1940cm
C H900.9 m2 AED 502.00 AED 0.00
Complete including erection, panels, columns, parapet, dowels, grouting, sealant,
service sleeves, electrical conduits, junction boxes, and ducts. All as per drawings
and specification.
Ref. to structural drawings.
Supply and erect super structure Precast External wall & parapet panels for the
Admin & Control room as per drawings and to the following :
Wall & parapet panels height : 420cm
Wall & parapet panels perimeter : 1940cm
D H900.10 m2 AED 501.00 AED 0.00
Complete including erection, panels, columns, parapet, dowels, grouting, sealant,
service sleeves, electrical conduits, junction boxes, and ducts. All as per drawings
and specification.
Ref. to structural drawings.
Pre-stressed hollow core slab 150mm thick with 80mm thick structure topping
E including supplying, erection, dowels, Grouting, sealant, service sleeves, electrical H900.11 m2 36.7 AED 290.00 AED 10,643.00
conduits, junction boxes and ducts as prescribed by drawings for Guard room
Pre-stressed hollow core slab 150mm thick with 80mm thick structure topping
F including supplying, erection, dowels, Grouting, sealant, service sleeves, electrical H900.12 m2 36.7 AED 290.00 AED 10,643.00
conduits, junction boxes and ducts as prescribed by drawings for Admin. Room
DIVISION 04 - MASONRY
DIVISION 05 - METALS
METAL FABRICATIONS
Specification Section 05500
Supply and fix decorative galvanized steel fence/ grill 1400mm height above precast
concrete panels at front side as per drawings complete including 50x50x2mm thick
powder coated galvanized steel frames and minimum 6mm thick laser cut decorative
D powder coated galvanized steel sheet with all necessary fittings and fixing X190.1
accessories, bolting, as detailed in archititural drawings. Color to selection/approval of
Engineer architect. Full size sample to be produced and submitted for Engineer/Client
Approval.
Supply and fix decorative galvanized steel window grill size 3100X 1700mm height
above precast concrete panels at front side as per drawings Complete including
40x40x2mm thick poder coated galvanized steel frames and minimum 4mm thick
E M900.1
laser cut decorative powder coated galvanized steel sheet, with all necessary
fittings and fixing accessories, bolting, as detailed in archititural drawings. Color
to selection of Engineer architect.
Supply and fix decorative galvanized steel Main Gate size 4000X 2200mm height
at front side as per drawings Complete including 50x50x2mm thick powder coated
F galvanized steel frames and minimum 6mm thick laser cut decorative powder coated M900.2
galvanized steel sheet, with all necessary fittings and fixing accessories, bolting as
detailed in archititural drawings. Color to selection/approval of Engineer architect.
Supply and fix decorative galvanized steel Main Gate size 6000X 2200mm height
at front side as per drawings Complete including 50x50x2mm thick galvanized
G steel frames and minimum 6mm thick laser cut decorative powder coated galvanized M900.3
steel , all necessary fittings and fixing accessories, bolting as detailed in archititural
drawings. Color to selection/approval of Engineer architect.
Supply and fix decorative galvanized steel Main Gate size 3000X 2200mm height
at front side as per drawings Complete iincluding 50x50x2mm thick poder coated
H galvanized steel frames and minimum 6mm thick laser cut decorative powder coated M900.4
galvanized steel sheet, with all necessary fittings and fixing accessories, bolting as
detailed in archititural drawings. Color to selection/approval of Engineer architect.
CAR
PAGE NO - B/4
UNIT QUANTITY RATE AED AMOUNT AED
m2 AED 91.00
m2 AED 72.00
m2 AED 55.00
CONTINUED
Supply and fix decorative galvanized steel Pedestrian gate size 1200X 2200mm
height at front side as per drawings Complete iincluding 50x50x2mm thick powder
coated galvanized steel frames and minimum 6 mm thick laser cut decorative powder
A M900.5
coated galvanized steel sheet , with all necessary fittings and fixing accessories,
bolting as detailed in archititural drawings. Color to selection/approval of Engineer
architect.
Supply and fix decorative galvanized steel Main Gate size 2000X 2200mm height
at front side as per drawings Complete iincluding 50x50x2mm thick powder coated
B galvanized steel frames and minimum 6mm thick laser cut decorative powder coated M900.6
galvanized steel sheet , with all necessary fittings and Fixing accessories, bolting as
detailed in archititural drawings. Color to selection/approval of Engineer architect.
Galvanized Chain link steel fence and gates as shown in the drawings, including
concrete foundation, steel column (Post), steel frame, steel vertical section. steel
C chain link mesh, tension wire, all necessary fittings and accessories. color to M900.7
Engineer's approval fixing on position, Detail drawings to be submitted Engineer's
approval.
Supply, Fabricating and fixing of ladder complete in all respect as per drawing and
D M900.8
specification.
Kitchen Cabinet
HPL built-in kitchen cabinet to fit room dimension including HPL doors panels and
shelves framing, stainless sinks,30mm Black Absolute granite counter tops back
splash, ironmongery and finishes, fixing on position, all as per drawings and
specification, complete.
WATERPROOFING
Specification Section 07122
BELOW-GRADE WATERPROOFING
Polythene sheeting laid on compacted fill.
SUB-STRUCTURE WATERPROOFING
Supply and applying of 3 coats of SBS elastomeric cold applied bitumen water
proofing coating (Single Modified Component Poly-urethane) for substructure as
detailed in drawings and specificationsas and to manufacturer's recommendations
H For Foundations and neck column, tie beams, retaining walls etc. W900.5
CAR
PAGE NO - B/5
UNIT QUANTITY RATE AED AMOUNT AED
m2 AED 43.00
CARRIED TO COLLECTION 1,285.00
BILL B - CIVIL PAGE NO - B/6
CESMM3
ITEM DESCRIPTION
Ref
CONTINUED
A 2 coats of Cold applied bitumen emulsion coating for Toilet and wet areas floor. W190.1
2 coats oxidized bitumen 115/15 rate of 0.25Kg/m2 on foam Concrete top surface or
B W390.1
as per W/P manufacturer instructions.
E Separation layer on water proofing membrane top surface and on thermal insulation. W390.4
4x4 cm sand cement triangular fillet for corners in roof areas as per detailed
G W390.6
drawings.
CAR
PAGE NO - B/6
UNIT QUANTITY RATE AED AMOUNT AED
m2 AED 30.00
m2 AED 11.00
m2 AED 42.00
m2 AED 4.00
m2 AED 59.00
CARRIED TO COLLECTION
BILL B - CIVIL PAGE NO - B/7
CESMM3
ITEM DESCRIPTION
Ref
Supply and installation of aluminum Double skin (Sandwich) or louver doors, including
frames, glazing, powder coated finishing and ironmongery, accessories ,fixing on
position, complete all as per drawings and specification.
Supply and installation of aluminum Windows powder coated with 6mm thick double
glazing (6+12+6), toughened glass, including ironmongery, accessories. All
as per drawings and specification, fixing on position, complete. (Toilet windows to
be 6mm thick single glazed).
DIVISION 09 - FINISHES
Plaster
15mm thick cement / sand internal surfaces plaster as specified including walls above
false ceilings with all related accessories mesh, angles ,metal lath and plaster stops
as directed by the Engineer.
G Walls G900.3
H Ceilings G900.4
20mm thick cement / sand external surfaces plaster as specified including all related
accessories mesh, angles ,metal lath and plaster stops as directed by the Engineer.
Flooring Finishes
(300 X 300) mm White Cement Tile flooring refer to specs . including sand
N cement bedding, , etc. complete. (color/style/pattern/subject to Engineer's Z429.2
approval) For Electrical rooms.
Ceramic Walls
Ceramic Skirting
(300 X 100) mm White Cement Tile Skirting refer to specs to match with Floor
R Z42.3
Tiles (color/style/pattern subject to Engineer's approval) for Electrical rooms.
CAR
PAGE NO - B/7
UNIT QUANTITY RATE AED AMOUNT AED
m2 AED 42.00
m2 AED 49.00
m2 AED 53.00
m2 AED 100.00
m2 AED 91.00
m2 AED 105.00
m2 AED 105.00
CARRIED TO COLLECTION
BILL B - CIVIL PAGE NO - B/8
CESMM3
ITEM DESCRIPTION
Ref
CONTINUED
Roof Finishes
(300 X 300) mm White Cement Tile refer to specs. including black sand bedding,
A expansion joints filler, and upstands treatment, etc. complete. (color/style/pattern Z429.4
subject to Engineer's approval).
Roof Skirting
(300 X 300) mm white Cement Skirting refer to specs including black sand bedding,
B expansion joints filler and upstands treatment, etc. complete.(color/style/pattern Z429.5
subject to Engineer's approval).
Wall Paint
2 coats of washable emulsion paint over two coats of stucco putty over undercoat
C primer as per manufacturer instruction and specifications. colors subject to Engineers V590.1
approval.
Ceiling Paint
2 coats of washable emulsion paint over two coats of stucco putty over undercoat
D V590.2
primer as per manufacturer instruction and specifications.
2 coats of Anti-Bacterial Silicone emulsion paint over two coats of stucco putty over
E V590.3
undercoat primer as per manufacturer instruction and specifications.
2 coats of epoxy Acrylic paint on cement plaster as per manufacturer instruction and
F V790.1
specifications. (color/texture/pattern/subject to Engineer's approval).
Supply and install 8cm thick Interlocking paving concrete stones including 4cm
J black sand bed, compacted 10cm sub- grade material laying cutting, red sand R783.2
filling complete.
PAGE NO - B/8
UNIT QUANTITY RATE AED AMOUNT AED
m2 AED 106.00
m2 AED 23.00
m2 AED 23.00
m2 AED 28.00
m2 AED 33.00
m2 AED 75.00
BILL B - CIVIL PAGE NO - B/9
CESMM3
ITEM DESCRIPTION
Ref
CONTINUED
Maintenance Works
Cutting/Removal/Demolish
Removing the loose, flake & free worn out concrete parts from the concrete
C surface according to the approval of the engineer, and transfer of waste to the D900.4
authorized places.
Dismantling and removal of the existing Grills boundary walls and stored on site
D D900.5
where directed by the Client (APPROXIMATELY 1.9MX0.6M).
F Connect the old concrete with the new concrete using (Bonding Agent). G900.6
Install a clean, rust-free steel Dowels iron or anchoring screws into holes on the
G N900.1
surfaces of different concrete elements, 16 mm diameter.
Supply and installation of a poly modified concrete mortar ready to add water only
when used on a hard, clean, concrete surface and the price includes the removal
of paints , weak/ flake parts from the surface and clean the reinforcing steel from
H X900.3
the rust.
PATCH REPAIR using RENDEROC TG or an equivalent thickness of no more
than 5cm for the layer with the use of EPOXY PRIMER SLOW-SETTING
Supply and installation of a poly modified concrete mortar ready to add water only
when used on a hard, clean, concrete surface and the price includes the removal
J of paints , weak/ flake parts from the surface and clean the reinforcing steel from X900.4
the rust.
Micro-Concrete Repair using (Renderoc La).
Supply and installation of ready-to-use epoxy restoration mortar from three solventfree
compounds for the edges of structural elements not exposed to the sun:
K The edges of columns and the corners of the beams, thickness of up to 5 cm, with X900.5
a density not exceeding 1100 kg / M₃. Resistivity (pressure 40 Nm / M². Curvature
of 15 Nm / M²) after 7 days. The price includes the primer as recommended by the
manufacturer.
Make a circle opening in the concrete parts with a diameter of 10 to 20cm and a
L X900.5
depth of 10 to 20cm.
Two coat of Epoxy Acrylic pain system for Existing boundary surfaces undercoat
primer as per manufacturer instruction & specification including repairing plaster/
M V900.1
concrete surfaces , cracks, flake , clean and remove all the dirts, salt, all to
specifications and drawings (color/texture/pattern subject to Engineer's approval).
PAGE NO - B/9
UNIT QUANTITY RATE AED AMOUNT AED
m3 AED 276.00
m2 AED 31.00
m2 AED 276.00
m2 AED 180.00
m3 AED 6,848.00
m3 AED 9,164.00
m3 AED 13,886.00
m2 AED 66.00