Professional Documents
Culture Documents
(036A,036B) , EIGHTEEN.
ENGINEER'S ESTIMATE
ISLAMABAD
CIVIL WORK
A EARTH WORK
i EXCAVATION
Excavation in all kinds of subsurface soil
material, upto required depth in foundation
and trenches including dressing & compaction
of excavated area upto 95% modified AASHTO
density and disposal of surplus excavated
material within the boundary limits of whole of 321 CM 424 136,053
the site area, or stockpiling at designated
places. as approved by The Engineer
B BACK FILL
Fill & Back fill in layers 150 mm thick
compacted upto 95% modified AASHTO density
with all lead and lifts, under floor with suitable
approved selected excavated material
obtained under item of excavation, including
shifting, laying in layers, breaking clods, 184 CM 530 97,483
watering ramming etc. complete in all respect
as per drawing, BOQ, specification or as
directed by the engineer incharge.
10 MARLA VILLAS TYPE- C (036A,036B) , EIGHTEEN.
ENGINEER'S ESTIMATE
EARTH WORKS
AMOUNT
SR# DESCRIPTION QTY UNIT RATE
(PKR)
C TERMITE PROOFING
Providing and spraying of anti termite
treatment using FMC ( Biflex) / Jaffer Brothers
(Agenda) or its equivalent and as per
manufacturer's instructions on all area of soil
in contact with the permanent structure
including under the foundation and on sides of
excavation ,before and after the earth filling
has been completed. The work will be done by
457 SM 161 73,577
a specialist sub-contractor approved by the
Engineer. Job shall be complete in all respects
and conforming to the requirements of
drawings, specifications and to the entire
satisfaction and approval of the Engineer.
BITUMINOUS COATING
Providing and applying 02 coats of water
proofing compound using bitumen coating
1020 applied hot at 4.9 kg per
E 10kg/sqm(substructure) complete in all respect
& confirming to the requirements of drawings
and specifications or as directed by the
Engineer incharge.
02 coats of bituminous coating on UGWT
i external walls (Drawing No. S-10) 21.60 m2 451.00 9,741.60
f D-7 900x2200 Single leaf hinged (as per Design) 1.98 Sm 12,912.00 25,565.76
g D-8 800x2220 Single leaf hinged (as per Design) 17.60 Sm 12,912.00 227,251.20
h D-9 800x2220 Single leaf hinged (as per Design) 5.28 Sm 12,912.00 68,175.36
B IRONMONGERY
D-1 1350x2200 Single leaf hinged (as per
a 1.00 Nos 7,125.00 7,125.00
Design)
D-2 1200x2500 Single leaf hinged (as per
b 1.00 Nos 7,125.00 7,125.00
Design)
D-3 1050x2200 Single leaf hinged (as per
c 4.00 Nos 7,125.00 28,500.00
Design)
D-4 1025x2200 Single leaf hinged (as per
d 1.00 Nos 7,125.00 7,125.00
Design)
D-5 1000x2200 Single leaf hinged (as per
e 1.00 Nos 7,125.00 7,125.00
Design)
f D-6 900x2200 Single leaf hinged (as per Design) 6.00 Nos 7,125.00 42,750.00
g D-7 900x2200 Single leaf hinged (as per Design) 1.00 Nos 7,125.00 7,125.00
10 MARLA VILLAS TYPE- C (036A,036B) , EIGHTEEN.
BILL OF QUANTITIES
DOORS AND WINDOWS
AMOUNT
SR# DESCRIPTION QTY UNIT RATE
(PKR)
h D-8 800x2220 Single leaf hinged (as per Design) 10.00 Nos 7,125.00 71,250.00
i D-9 800x2220 Single leaf hinged (as per Design) 3.00 Nos 7,125.00 21,375.00
MD-1 900x2200 Single leaf hinged (as per
j 1.00 Nos 7,125.00 7,125.00
Design)
MD-2 900x2100 Single leaf hinged (as per
k 2.00 Nos 7,125.00 14,250.00
Design)
MD-3 800x2200 Single leaf hinged (as per
l 1.00 Nos 7,125.00 7,125.00
Design)
C ALUMINUM WORKS
Powder coated aluminum windows and
ventilators premium model (of approved
colour) with fixed/ sliding/ openable window/
ventilator shutters using 2mm thick minimum
double glazed aluminum sections with
minimum 100mm wide frame, including 5mm
thick double glazed Single side tempered clear
glass (frosted glass in windows and ventilators
of toilet areas), openable/ sliding fly proof
shutters with fly/ insect screen in openable
sections of windows/ ventilators matching
hardware door handles locking arrangement
with approved stays fixing with stainless steel
screws sealing the joints between aluminum
sections and adjoining surfaces with
I W1 13.42 Sm 16,812.50 225,623.75
II W2 11.76 Sm 16,812.50 197,715.00
III W3 16.40 Sm 16,812.50 275,725.00
IV W4 5.94 Sm 16,812.50 99,866.25
V W5 7.05 Sm 16,812.50 118,528.13
VI W6 1.60 Sm 16,812.50 26,900.00
VII W7 1.20 Sm 16,812.50 20,175.00
VIII W8 3.52 Sm 16,812.50 59,180.00
IX W9 1.92 Sm 16,812.50 32,280.00
X v1 1.92 Sm 16,812.50 32,280.00
XI v2 1.44 Sm 16,812.50 24,210.00
XII v3 0.60 Sm 16,812.50 10,087.50
TOTAL AMOUNT (5) 2,113,153.35
10 MARLA VILLAS TYPE- C (036A,036B) , EIGHTEEN.
BILL OF QUANTITIES
FINISHES WOKRS
SR# DESCRIPTION QTY UNIT RATE AMOUNT (PKR)
6 FINISHES (FLOORS & WALLS)
A INTERNAL FINISHES FLOORS & WALLS
Porcelain Tiles Floor for Maid 300mm x
300mm (PT-01)
P/L colour, glazed /non skid vitrified Porcelain
Tiles (polished) not exceeding 900 sq/cm each,
(Rak make) on any floor with dry bond (stile
i bond) over a base of 1`` th cement mortar (1:3) 89.00 Sm 5,187.50 461,687.50
including jointing to tiles with joint filler of
approved quality and as directed by the
Engineer Incharge.
Perlino Marble
Providing and laying A quality Perlino marble
slab (Prepolished) on floors, stair, sills as per
approved size jointed and groove fill with
ix approved grout/ filler including edging, cutting,
grinding and chemical. Complete in all respect
and as directed by the Engineer Incharge.
Enamel
Providing and applying 3 coats of enamel
Jotun paint including surface preparation for
primer on plastered wall and ceiling to form
ii smooth base for plastic emulsion paint, 55.10 Sm 645.60 35,572.56
including sanding filling where required etc.
complete in all respect.
C FALSE CEILING
Providing and fixing 12.5 mm gypsum board
false ceiling including cost of fiber tape for
joints, s.s suspension with adjustable clumps,
i pelmets and all Accessories and hardware etc. 333.00 Sm 3,766.00 1,254,078.00
Complete in all respect as per design.
i) Ground floor
a 1718 x 600 16.08 Sm 17,485.00 281,158.80
ii) 1st floor
a 1500x 600 10.00 Sm 17,485.00 174,850.00
b 1600 x 600 20.00 Sm 17,485.00 349,700.00
c 2365 x 600 7.50 Sm 17,485.00 131,137.50
For Media Wall 19.50 Sm 17,485.00 340,957.50
E WPC PANEL
Providing and installation of WPC Wall at
Media Wall including his accessories . all hard
ware as per approved brand and complete in
all
respect as per drawings or as directed by the
Architect.
i) Ground floor 9.75 Sm 3,465.00 33,783.75
F WOODEN AND GLASS RAILING
Stair hand railing comprising wooden top rail
and 12 mm tempered glass with fixing , cutting,
grooving polishing, embedding aluminum
channel in wall or floor/steps rawal bolt base
plate etc., complete in all respects as per
drawings.
H GLASS PARTITION
Providing and fixing Tempered glass partition
of approved make including 12mm thick best
quality imported tinted/frosted Tempered
glass and aluminum fitting coated, jointing
I 13.50 Sm 16,812.50 226,968.75
,sealing lugs cutting holes and making good
damages to wall etc. complete as required in
any floor as directed by Engineer In charge.
I EXTERNAL FINISHES
External paint weather shield paint for
i external wall, beams, columns, parapet, 450.00 Sm 620.00 279,000.00
brackets, sills, features etc.
J ROOF WATER PROOFING
Providing and laying, Terrazzo Mosaic tiles, 300
mm x 300 mm x 25 mm of white cement, on
walls and floors laid, set in CM (1:2) and joints
i grouted with white / colored cement, chemical 248.40 Sm 2,690.00 668,196.00
polished, complete.
stone cladding
P/L colour, stone in split shape/pattern not
exceeding 6000 sq/cm each, (Imported make)
on walls, with dry bond (stile bond)over a base
iv of ½`` the cement mortar (1:3) including 55.43 Sm 6,830.00 378,586.90
jointing to tiles with joint filler of approved
quality and as per direction of Engineer
Incharge.
L PAVEMENT
P:C:C Under Tile
Providing and laying upto 75mm thick plain
cement concrete 1:3:6 for paving arrangement 225.32 Sm 1,748.50 393,979.01
complete in all respect as shown on drawings.
Pavement
Providing and laying 50mm thick colour
(imported pigment) cement Interlock paving of
approved make (mechanically compressed and
vibrated factory manufactured) not exceeding
4 sft each in any approved pattern/shape on
floors foot paths parking areas hard standing
ii etc. laid in approved pattern set in 1:4 cement 225.32 Sm 1,650.00 371,784.60
mortar and joints grouted/pointed with
coloured cement (1:2) using imported
pigments, including cutting where required
complete in all respect as shown on drawings.
50mm thick
M HEEL KERB
10 MARLA VILLAS TYPE- C (036A,036B) , EIGHTEEN.
BILL OF QUANTITIES
FINISHES WOKRS
SR# DESCRIPTION QTY UNIT RATE AMOUNT (PKR)
Providing and laying 75mm thick colour/ non
colour (imported pigment) cement heel kerb of
approved make (mechanically compressed and
vgibrated factory manufactured) not exceeding
1 Rm in any approved pattern/ shape on floors
foot paths parking areas hard standing etc. laid
21.00 Rm 650.00 13,650.00
in approved pattern set in 1:4 cement mortar
and joints grouted/pointed with coloured
cement (1:2) using imported pigments,
including cutting where required complete in
all respect as shown on drawings.
N LANDSCAPE
Providing and maintaining landscape in green
and external area of plot including earth
leveling ,dressing, grass laying, granular stone
i where required complete in all respect as 54.92 Sm 850.00 46,682.00
shown on drawings.