Professional Documents
Culture Documents
BILL OF QUANTITIES
General Excavation by mechanical means in all types of soil including dense soil,
discentegrated/ weathered/ soft rock including necessary manual excavation for
2 dressing the edges & leveling, all leads and lifts. But for hard rock owners should Cuft 8500.00 20/- per cuft 170,000/-
pay the excavation charges.
Providing and fixing reinforcement for RCC work with high yield strength ribbed
tor steel (HSD) bar of various diameters and grade of steel as specified below
conforming to IS or equivalent BS specification including cutting and waste,
bending, hoisting, fabricating and placing in position according to drawings and
binding the reinforcement with galvanised annealed binding wire of double fold
of 18 gauge and providing PVC cover blocks for placing the reinforcements in
#REF! position and for maintaining the cover specified and/or according to relevant IS
or equivalent BS code.
Providing, fabricating and erecting of steel form work at all levels and places
wherever needed/ specified as per drawing including striking/ smooth finished
MS plates with adjustable steel props of acceptable staging system and with
sufficient bracing as approved by consultant. Cost to include designing of proper
form work and staging system to suit the requirements, Submission of design
#REF! calculations and shop drawings for approval, sealing the joints with heavy duty
brown self adhesive tape.
Providing and laying autoclaved aerated red brick masonry with 190mm x 90mm
x 90mm thick in super structure above plinth level up to floor 2 level with RCC
band at sill level and lintel level with approved block laying polymer modified
#REF! adhesive mortar all complete as per direction of Engineer-in-Charge.
cement mortar for brick work 1 : 4 (1 cement : 4 fine sand), finished smooth
complete including hacking the surface, etc. complete for all levels and heights.
#REF! Cuft 440.00
Providing & laying 12 mm thick cement plaster to ceiling and RCC surfaces in
cement mortar 1 : 4 (1 cement : 4 fine sand), finished smooth complete
including hacking the surface, scaffolding etc. complete for all levels and heights.
#REF! Sqft 1400.00
Providing & laying 15 mm thick cement Plaster to Internal walls columns, piers
etc. in cement mortar 1 : 4 (1 cement : 4 sand; 75% fine sand & 25% coarse
sand) on plain side of wall or R.C.C. Rate shall include cost of cement, surface
preparation, hacking, cleaning, curing, labour, necessary tools&tackles and
#REF! scaffolding etc. complete for all levels and heights as per the Directions of Sqft 3800.00
Engineer / Architect.
Providing and applying 18mm thick cement plaster on extrenal faces of walls in
two coats under layer 12mm thick with cement mortar 1:5 (1 Cement : 5 sand;
Coarse Sand 50% and fine sand 50%) and top layer 6 mm thick CM1:4 (1:
cement: 4 coarse sand) to External wall surface at all heights and levels including
providing and mixing of approved brand water proofing compound (Conplast
WL) the rate shall include cost of cement, surface preparation, hacking,
#REF! cleaning, curing, labour, necessary tools&tackles and scaffolding etc. complete Sqft 1800.00
for all levels and heights as per the Directions of Engineer / Architect.
Mason Charges for brickwork and plastering 2 3300.00 130/-per sft 858,000/-
Ventilators (2 x 3) 3 nos
2 2500/- per vent 15,000/-
Gate 20000/-
10% of variation may occur due site location. GRAND TOTAL 7,499,698/-