You are on page 1of 2

Sl.

Description Qty Unit Rate Amount Remarks


No.
Option - 2 Demolition Existing damaged walls & Construct New Boundary Wall as per exiaitng same finish.
A

1 Demolition Works:

All related equipment, labours and loader trucks or trailers to include as


well as loading and unloading. All RAK Municipality Permits and NOC's of
a Electricity, Water, Sewerage / Drainage, Etisalat & RTA included.
Demolishing contractor to make sure that surface is free from any debris or
constructions material debris and plain and flattened surface before
handing over to Client. to be coordinated with adjacent occupants.

Dismantling and removal of any damaged boundary wall, remove filled


i earth, debris from between boundary wall & neighbor wall and to be 50 RM 290 14,500
disposed to municipality approved waste disposal areas.

2 EARTHWORKS GENERAL NOTES:

a Excavation

excavate to reduce levels for Service Block & other foundations for
i 93.6 Cu.m 35 3,276
boundary wall Foundations.

b Back Filling

filling with 250mm thk. Road Base -Service Block & other foundations for
i 19.5 Cu.m 196 3,822
boundary wall Foundations.

c Compaction

Compaction Works till 95% of MDD for All Excavated Areas & under
i 78 Sq.m 35 2,730
Slab on Grade

3 SUBSTRUCTURE WORKS

a Blinding concrete (Grade 20) using moderate sulphate resistant cement


with, shuttering and reinforcement as specified

b 100mm thick blinding for boundary wall Footings 7 Cu.m 560 3,640

Reinforced concrete (Grade 40) using moderate sulphate resistant cement


with 0.4 water cement ratio, Reinforcement shall be high yield bars with
c characteristic strength of 460N/sq. mm. and mild steel round bars with
characteristic strength of 250N/sq. mm. all complying with BS4449.
(including shuttering and reinforcement as specified).

i for boundary wall Footings 9 Cu.m 1350 12,150

ii Strap Beams 8 Cu.m 1350 10,530

iii Columns 4 Cu.m 1250 4,388

iv Tie Beams 2.6 Cu.m 1250 3,250


Sl.
Description Qty Unit Rate Amount Remarks
No.

4 MASONRY WORKS

a 200mm thick Solid Block Work for super structure 59 Sq.m 149 8,717
200mm thick Hollow concrete masonry units bedded in mortar including
b 195 Sq.m 129 25,155
reinforcement and anchoring where necessary

c Coppoing finish for boundary wall top 40mm thick 65 Rm 65 4,225

d Bittuman paint production coat for below earth super structure. 65 RM 26 1,690

5 WALL FINISHES

a Plaster

15 mm thick to receive Paint finishes till soffit Level (Paint Measured


i 65 23,660
separately)
b Wall Paint 364 Sq.m 0
Grafio Paint as per the existing same finish primer, base coat and top coat
i 49 17,836
as per the approved sample by clint. (External Wall)
Note: All contract terms & conditions applicable.
Sample to be approved for colour/model/material prior starting the work. Branded items should be used.
Warranty certificate must be provided for the new items installed and water proofing as per standards.
Delivery note, Signed job sheet from the tenant/supervisor and Work Order copy must be attached along with the invoice.
Quality of supplied items and executed installation should be as per standards. Work should be done causing minimum disturbance to the tenants.
To be provide the protection sheets to cover while the activity is in progress. The whole of the Works shall be under full time supervision.

You might also like