Professional Documents
Culture Documents
Concrete : C 25/30
Cylinder compressive strength fck = 25.00 MPa
Tensile strength fctm = 2.60 MPa
Longitudinal steel : B500
Yield strength fyk = 500.00 MPa
1
[GeoStructural Analysis - Cantilever Wall | version 5.19.2.0 | Copyright © 2014 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Potporni zid za zastitu temeljne jame FAZA B
Geometry of structure
Coordinate Depth
No.
X [m] Z [m]
1 0.00 0.00
2 0.00 2.70
3 1.50 2.70
4 1.50 3.00
5 -0.40 3.00
6 -0.40 2.70
7 -0.30 2.70
8 -0.30 0.00
The origin [0,0] is located at the most upper right point of the wall.
Wall section area = 1.38 m2.
0.30
2.70
0.00:1
3.00 3.00
0.10 1.50
0.30
1.90
Soil parameters
Nasip
Unit weight : g = 19.00 kN/m3
Stress-state : effective
Angle of internal friction : jef = 30.00 °
Cohesion of soil : cef = 0.00 kPa
Angle of friction struc.-soil : d = 3.00 °
2
[GeoStructural Analysis - Cantilever Wall | version 5.19.2.0 | Copyright © 2014 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Potporni zid za zastitu temeljne jame FAZA B
Soil : cohesionless
Saturated unit weight : gsat = 20.00 kN/m3
1 - Nasip
Foundation
Type of foundation : soil from geological profile
Terrain profile
Terrain behind construction has the slope 1: 1.00 (slope angle is 45.00 °).
Embankment height is 1.80 m, embankment length is 1.80 m.
1.80
1.80
3.00 3.00
1.90
Water influence
Ground water table is located below the structure.
3
[GeoStructural Analysis - Cantilever Wall | version 5.19.2.0 | Copyright © 2014 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Potporni zid za zastitu temeljne jame FAZA B
Verification No. 1
Forces acting on construction
Name Fhor App.Pt. Fvert App.Pt. Coeff. Coeff. Coeff.
[kN/m] z [m] [kN/m] x [m] overtur. sliding stress
Weight - wall 0.00 -1.03 33.12 0.54 1.000 1.000 1.350
Weight - earth wedge 0.00 -1.63 62.74 0.98 1.000 1.000 1.350
Active pressure 52.45 -1.20 44.45 1.61 1.350 1.350 1.350
Verification of complete wall
Check for overturning stability
Resisting moment Mres = 125.43 kNm/m
Overturning moment Movr = 84.79 kNm/m
Wall for overturning is SATISFACTORY
62.74
+x
1.90
+z
4
[GeoStructural Analysis - Cantilever Wall | version 5.19.2.0 | Copyright © 2014 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Potporni zid za zastitu temeljne jame FAZA B
3.00 3.00
1.90
151.33
151.33
Dimensioning No. 1
Pressure at rest behind the structure - partial results
Layer Thickness a jd cd g Kr Comment
No. [m] [°] [°] [kPa] [kN/m3]
1 0.90 0.00 30.00 0.00 19.00 0.866
2 1.80 0.00 30.00 0.00 19.00 0.500
Pressure at rest distribution behind the structure (without surcharge)
Layer Start [m] sZ sW Pressure Hor. comp. Vert. comp.
No. End [m] [kPa] [kPa] [kPa] [kPa] [kPa]
0.00 0.00 0.00 0.00 0.00 0.00
1
0.90 17.10 0.00 25.65 25.65 0.00
0.90 17.10 0.00 25.65 25.65 0.00
2
2.70 51.28 0.00 42.74 42.74 0.00
Forces acting on construction
Name Fhor App.Pt. Fvert App.Pt. Coeff. Coeff. Coeff.
[kN/m] z [m] [kN/m] x [m] moment norm.force shear for.
Weight - wall 0.00 -1.35 19.43 0.15 1.000 1.350 1.000
5
[GeoStructural Analysis - Cantilever Wall | version 5.19.2.0 | Copyright © 2014 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Potporni zid za zastitu temeljne jame FAZA B
+x
+z 1.90
6
[GeoStructural Analysis - Cantilever Wall | version 5.19.2.0 | Copyright © 2014 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]