Professional Documents
Culture Documents
SUMMARY
Advantages
Levelling effect was improved by enhancing the migration of
disperse dyes during application on polyester
Gives very good dispersion for dyes with big molecules and their
combination with other dyes
Does not impede full colour yield
Acts as a stripping agent at higher usage levels
Features
Low foaming
Uniform dyeing for dyes with different molecule size
Promotes re-levelling of dyestuff in faulty dyed polyester
Storage
Type Non-ionic
Application
In high-temperature dyeing equipment, at the commencement of the dyeing cycle add
The dispersed dyestuffs are then added to the bath and temperature gradually raised to the
peak dyeing temperature (130o to 1350 C), maintained there as required, followed by the
cooling phase, and draining.
For stripping faulty dyeing, level of Levexon® LCD Liq is raised to 10 - 14 gm/litre, pH adjusted to
5 with 1 to 2 gm/litre Buffer and the material treated at 1300 to 1350C for 60 to 90 minutes.
Half-tone printed colour effects can be obtained by using a blank print paste containing 2.5
parts Levexon® LCD Liq per 100 parts of paste as a base or overprint (wet-on-wet) depending
on the design, followed by high-temperature fixation in loop-steamer.
Non-warranty:
The information in this publication is believed to be accurate and is given in good faith, but no representation
or warranty as to its completeness or accuracy is made. Suggestions for uses or applications are only
opinions. Users are responsible for determining the suitability of these products for their own particular
purpose. No representation or warranty, expressed or implied, is made with respect to information or
products including, without limitation, warranties of merchantability, fitness for a particular purpose, non-
infringement of any third party patent or other intellectual property rights including, without limit, copyright,
trademark and designs. Any trademarks identified herein are trademarks of the Harris & Menuk Chemicals
Pvt. Ltd.,