Professional Documents
Culture Documents
Course Information:
ECW 341 Water Engineering Laboratory (Semester 05)
CO1: Construct the experiments, data analysis and interpretation methods related to basic fluid mechanics, hydraulics, hydrology and water quality
using standard test and measurement. :(P5)
CO2: Demonstrate leadership skills in task related to water engineering. :(A5).
PO4: Conduct investigations of well-defined problems; locate and search relevant codes and catalogues, conduct standard tests and measurements.
PO6: Demonstrate knowledge of the societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to engineering
technician practice and solutions to well defined engineering problems.
1
ECW341@ Diploma Kejuruteraan Awam Universiti Teknologi MARA
A. LABORATORY ACTIVITIES
Course synopsis:
This course reinforces concepts introduced in basic fluid mechanics, hydraulics, hydrology and water quality. Students are required to conduct experiments, analyze
and interpret data and prepare laboratory reports.
Hydraulics At the end of the laboratory session, students should be able to: • LABORATORY
F2F
i. Determination of head loss in pipes due to
4 •
friction, fittings, sudden expansion, and i) Able to conduct and construct the determination of head loss in
LABORATORY
(2 hours) pipes due to friction, fittings, sudden expansion and contraction REPORT
contraction. laboratory experiments. (CO1 – PO4)
(Preparation)
LEVEL 1
31/10/22 ii. Measurement of flow over broad ii) Able to conduct and construct the measurement of flow over
– crested/sharp crested weir. broad crested/sharp crested weir laboratory experiments. (CO1 –
04/11/22 PO4)
iii) Analyze and interpret the data based on obtained data. (CO2 –
PO6)
2
ECW341@ Diploma Kejuruteraan Awam Universiti Teknologi MARA
At the end of the laboratory session, students should be able to:
5
Hydraulics • LABORATORY
(2 hours) F2F
i. Determination of hydraulic parameters in i) Able to conduct and construct the determination of hydraulic
parameters in uniform flow for open channels laboratory • LABORATORY LEVEL 1
07/11/22 uniform flow for open channels. REPORT
experiments. (CO1 – PO4)
– (Preparation)
ii) Analyze and interpret the data based on obtained data. (CO2 –
11/11/22
PO6)
6 At the end of the laboratory session, students should be able to:
(2 hours) Hydraulics • LABORATORY
F2F
i. Determination of turbine performance and i) Able to conduct and construct the determination of turbine • LABORATORY
14/11/22 performance and measurement of pump efficiency, head and LEVEL 1
measurement of pump efficiency, head and REPORT
– discharge laboratory experiment (CO1 – PO4) (Preparation)
discharge ii) Analyze and interpret the data based on obtained data. (CO2 –
18/11/22
PO6)
21/11/2022 – 27/11/2022
CUTI PERTENGAHAN SEMESTER - (MID SEMESTER BREAK)
3
ECW341@ Diploma Kejuruteraan Awam Universiti Teknologi MARA
10 At the end of the laboratory session, students should be able to: • LABORATORY
Water Quality i) Able to conduct and construct the measurement of chemical F2F
(2 hours)
parameters of water laboratory experiment (CO1 – PO4) • LABORATORY LEVEL 1
i. Measurement of biological parameters of ii) Analyze and interpret the data based on obtained data. (CO2 – REPORT
19/12/22 (Preparation)
– water: Enumeration of Bacteria PO6)
23/12/22
24/12/2022 – 01/01/2023
SPECIAL LEAVE / / CUTI KHAS PERAYAAN
Hydrology
4
ECW341@ Diploma Kejuruteraan Awam Universiti Teknologi MARA
13
(2 hours)
F2F OBSERVATION
16/01/23 (PRACTICAL TEST 2)
– PRACTICAL TEST 2 Individual : 10 – 20 minutes.
20/01/23
*Date and topics are
• Measurement of physical parameters of water: Dissolved Oxygen (DO) & Biochemical Oxygen Demand (BOD)
subjected to changes
14 • Measurement of chemical parameters of water: JAR Test - Measurement of water turbidity.
(2 hours) • Measurement of biological parameters of water: Enumeration of Bacteria ONLINE EXIT SURVEY
Note: 23 – 24/01/2023
23/01/23 (Chinese New Year)
–
27/01/23
30/01/23
– STUDY WEEK
05/02/23
06/02/23
– FINAL ASSESSMENT
21/02/23
22/02/23
– SEMESTER BREAK
19/03/23
* Engineering activities will be conducted face to face (F2F) for all campuses.
Assessment Weightage
Continous Assessment
Individu
• Laboratory Observation x 1 nos : 20%
• Practical Test x 2 nos (20 + 20 ) : 40%
Group
• Laboratory Report x 3 nos : 30%
• Assignment/Mini Project : 10%
5
ECW341@ Diploma Kejuruteraan Awam Universiti Teknologi MARA
References
• Yunus A. Cengel, Reno, John M Cimbala. (2014). Fluid mechanics : Fundamental and Application 3rd Edition. Mc Graw Hill Higher Education
• Satinder Ahuja. (2013). Monitoring water quality, pollution assessment, analysis and remediation. Elsevier
• K Subramanya. (2013). Hydrology Engineering 4th Edition. Mc Grawhill: New Delhi
• Hammer Mark, J., Mark J. Hammer Jr. (2012).Water and wastewater technology 7th Edition.Pearson/ Prentice Hall
• Malaysian Standard (1991). MS1228: Code of Practice for Design and Installation of Sewarge System. Department of Standard, Malaysia
• Standard Methods for the Examination of Water and Wastewater (1999). American Public Health Association, American Water Works Association, Water
Environment Federation
Prepared By:
(CAROLINE PETER)
Course Coordinator ECW341
UiTM SARAWAK
Verified By:
6
ECW341@ Diploma Kejuruteraan Awam Universiti Teknologi MARA