This document provides specifications for hot rolled steel bars used to reinforce concrete, including dimensions, chemical composition limits, mechanical properties, and testing requirements. The bars must be made of steel with controlled carbon content between 0.15-0.25% and have a minimum yield strength of 400 MPa. Dimensions range from 10-40mm in diameter or square cross-section, and testing involves tensile and bending tests to ensure the bars meet strength and ductility standards.
This document provides specifications for hot rolled steel bars used to reinforce concrete, including dimensions, chemical composition limits, mechanical properties, and testing requirements. The bars must be made of steel with controlled carbon content between 0.15-0.25% and have a minimum yield strength of 400 MPa. Dimensions range from 10-40mm in diameter or square cross-section, and testing involves tensile and bending tests to ensure the bars meet strength and ductility standards.
This document provides specifications for hot rolled steel bars used to reinforce concrete, including dimensions, chemical composition limits, mechanical properties, and testing requirements. The bars must be made of steel with controlled carbon content between 0.15-0.25% and have a minimum yield strength of 400 MPa. Dimensions range from 10-40mm in diameter or square cross-section, and testing involves tensile and bending tests to ensure the bars meet strength and ductility standards.