Professional Documents
Culture Documents
Lift Cylinder Mounts (Bulldozer) - Remove and Install
Lift Cylinder Mounts (Bulldozer) - Remove and Install
Removal Procedure
Required Tools
Table 1
Start By:
Illustration 1 g01411718
Illustration 2 g01411719
2. Attach Tooling (A) and a suitable lifting device to yoke (4). The weight of yoke (4) is approximately 159 kg (350 lb).
Illustration 3 g01411738
Installation Procedure
Required Tools
Table 2
Illustration 4 g01411741
Illustration 5 g01411738
1. Lower the temperature of bearings (6). Install bearings (6) so that the groove in bearings (6) is within Zone (A).
Illustration 6 g01411743
4. Attach Tooling (A) and a suitable lifting device to yoke (4). The weight of yoke (4) is approximately 159 kg (350 lb). Position yoke (4). Use Tooling (E) to install pin (3).
Illustration 7 g01411718
End By:
PIP-10891755
2021/08/03
21:56:21+02:00
i02830376
© 2021 Caterpillar Inc.
Caterpillar:
Confidential Green