Professional Documents
Culture Documents
GF-OGF4-J-SP-1008
PIPING AND VALVES
GARRAF OPERATIONS
GF-OGF4-J-SP-1008
EPPM/ATCO
PP 03.04.19
The signing, countersigning or other endorsements of any drawings and documentation by PCIHBV’s Representative, agents or
employees shall neither be interpreted as implying the responsibility for the correctness and accuracy of such documents nor
relieving the CONTRACTOR of its obligations to review all information, data, drawings, and specifications provided by PCIHBV.
Class 1
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
REVISION HISTORY
1 25/02/2019 UPDATE
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
TABLE OF CONTENTS
1 GENERAL ........................................................................................................................................ 4
4 REFERENCES................................................................................................................................. 9
10 MATERIALS .................................................................................................................................. 20
16 THERMOWELLS ........................................................................................................................... 25
1 GENERAL
Garraf Development and Production Service Contract (DPSC) was signed on 18th January
2010 by South Oil Company of the Republic of Iraq (SOC) of one part and PETRONAS
Carigali Iraq Holding B.V, Japan Petroleum Exploration Company (JAPEX) and North Oil
Company (NOC) of the second part for the Garraf Contract Area which was subsequently
made effective on 10th February 2010.
Garraf field takes its name from the Shatt Al Garraf waterway, a tributary of the River Tigris.
It is one of a group of undeveloped fields sometimes referred to as the Garraf axis fields. The
others include Nasiriyah and Rafidain.
Garraf Contract Area (GCA) is located onshore in the province of Thi Qar, approximately 250
km southeast of Baghdad, 275km northwest of Basra and 85 km from Nasiriyah town. Garraf
is within Widyan Mesopotamia Basin which covers an area of 350 sq km.
Two (2) proven formation in Garraf are being considered for development, namely Mishrif
and Yamama. At the same time, there are opportunities available to appraise deeper Zubair
and Ratawi formations.
Garraf Oil Development are envisaged into several phases based on the full field
development production forecast of Mishrif formation.
The following picture depicts the wellpad and trunk lines network in all phases of development
from Mishrif formation.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
The scope of work for this PROJECT will consist of the following main items:
Development of two (2) new wellpads, i.e. Wellpad G (2 sectors) and Wellpad K (5
sectors) complete with trunkline for each wellpad. Wellpad G trunkline to Wellpad
B while Wellpad K trunkline to Wellpad H;
Execution of Well Tie-in works from wellhead to isolation valves upstream of MPFS
for existing Wellpad D (2 nos), Wellpad E (8 nos), Wellpad F (4 nos), Wellpad H (7
nos), and Wellpad J (3 nos).
Installation of three (3) units of new MPFM (free issue by PCIHBV) at existing
wellpad P, wellpad J and wellpad C.
2 DOCUMENT SCOPE
The Scope of this document includes the codes and standards, parameters, criteria,
methodology, software, load cases, calculations and documentation etc. to be considered as
a guide line while performing the Piping / Pipeline flexibility analysis for the OIL GATHERING
FACILITIES PHASE 4.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
This document covers the general requirements in relation to equipment nozzle evaluation
and critical cases pertaining to stress analysis of piping system and pipeline. This
specification is applicable for Piping / Pipeline carried out in accordance with ASME B31.3 /
ASME B31.4 and does not cover any instrumentation tubing.
This specification is also applicable for Piping Stress Calculation of Package Units. The
package suppliers shall be responsible for their calculation reports.
3.1 Definitions
For the purpose of this report, the following definitions shall be apply:
3.2 Abbreviations
BB Bolted Bonnet
BC Bolted Cover
BE Beveled End
Br Bronze
BS British Standards
BW Butt Welding
CA Corrosion Allowance
CONC Concentric
Cr Chromium
CS Carbon Steel
ECC Eccentric
FF Flat Face
GALV Galvanized
Gr Grade
HEX Hexagonal
LR Long Radius
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
MFG Manufacturing
Max Maximum
Min Minimum
Mm Millimeters
Mo Molybdenum
OD Outside Diameter
PE Plain End
R Radius
RED Reducing
RF Raised Face
SB Screwed Bonnet
Sch Schedule
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
SMLS Seamless
SS Stainless Steel
STD Standard
SW Socket Weld
TE Threaded End
THK Thickness
WB Welded Bonnet
WN Welded Neck
4 REFERENCES
The codes and standards specified herein form a part of the requirements of this specification
in the manner and to the extent specified. Reference to any Standard or Code shall mean
the latest edition of that Standard or Code including addenda or supplements or revisions
thereto at the time of the project.
The latest edition, unless specified otherwise, of the following codes and standards shall
establish the minimum standards for the work. EPC CONTRACTOR may use alternate
standards that meet or exceed those listed if approved by COMPANY.
Metallic Gaskets for Pipe Flanges – Ring Joint, Spiral Wound and
ASME B16.20
Jacketed
Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex,
ASME B18.2.1
HeFlange,Lobed Head, and Lag Screws (Inch Series)
Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex
ASME B18.2.2
Flange, and Coupling Nuts (Inch Series)
BS 1873 Steel Globe and Globe Stop and Check Valves (flanged and
butt welding ends) for the Petroleum, Petrochemical and Allied
Industries
BS 5154 Copper Alloy Globe, Globe Stop and Check, Check and Gate
Valves
BS EN ISO 17292 Metal ball valves for petroleum, petrochemical and allied
industries
BS EN ISO 15761 Steel gate, globe and check valves for sizes DN 100 and
smaller, for the petroleum and natural gas industries
BS EN ISO 10434 Bolted bonnet steel gate valves for the petroleum,
petrochemical and allied industries
API Specification 6A Specification for Well head and Christmas Tree Equipment
API Standard 594 Check Valves: Flanged, Lug, Wafer and Butt Welding
Steel Gate, Globe, and Check Valves for Sizes NPS 4 (DN
API Standard 602
100) and Smaller for the Petroleum and Natural Gas Industries
API Standard 608 Metal Ball Valves – Flanged, Threaded and Welding End
API Standard 609 Butterfly Valves: Double Flanged, Lug and Wafer Type
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
MSS-SP-6 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-
End Flanges of Valves and Fittings
MSS-SP-25 Standard Marking Systems for Valves, Fittings, Flanges and Unions
NACE MR 0175 / ISO 15156 Petroleum and Natural Gas Industries – Materials for Use in H2S-
Contaning Environment in Oil and Gas Production
NACE TM 0284 Evaluation of Pipeline and Pressure Vessel Steels for Resistant
to Hydrogen Induced Cracking
ASTM A106 Specification for Seamless Carbon Steel Pipe for High
Temperature Service.
ASTM A182 Specification for Forged or Roll Alloy Steel pipe Flanges,
Forged fittings and valves and parts for High temperature
service.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
ASTM A193 Alloy-Steel and Stainless Steel Bolting for High Temperature or
High Pressure Service and Other Special Purpose Applications
ASTM A194 Carbon and Alloy Steel Nuts for Bolts for High Pressure or
High Temperature Service, or Both
ASTM A216 Specification for steel castings, carbon, suitable for fusion
welding for high temperature service.
ASTM A234 Specification for Piping Fittings of Wrought Carbon Steel and
Alloy Steel for Moderate and Elevated Temperatures.
ASTM A333 Standard Specification for Seamless and Welded Steel Pipe
for Low-Temperature Service.
ASTM A350 Specification for Carbon and Low Alloy Steel Forgings,
requiring notch toughness testing for piping components.
ASTM A370 Standard test methods and definition~ for mechanical testing
of steel Products.
ASTM A420 Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low
Temperature Service.
ASTM A516 Carbon Steel Plate for Moderate and Lower, Temperature
Service.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
ASTM A671 Standard Specification for Electric Fusion Welded Steel Pipe for
Atmospheric and Low Temperatures.
This Specification shall be used in conjunction of relevant Data Sheet for Manual Valves.
Deviations from this specification are only acceptable where the EPC CONTRACTOR has
listed in his quotation the requirements he cannot, or does not wish to comply with and the
CONSULTANT / COMPANY has accepted in writing the deviations before the order is placed.
Any technical deviations to the Purchase order and its attachments including, but not limited
to, the Data Sheets and Narrative Specifications shall be sought by the EPC CONTRACTOR
only through TECHNICAL NOTES format. TECHNICAL NOTES require CONSULTANT /
COMPANY review/approval, prior to the proposed technical changes being implemented.
Technical changes implemented prior to CONSULTANT / COMPANY approval are subject
to rejection.
7 ENVIRONMENTAL CONDITIONS
The climate at the facility is desert with blowing sand and abrasive dust with short periods of
torrential rains.
All equipment is suitable for a severe desert environment. All field equipment is capable of
operating satisfactorily and within specified performance limits for the given site conditions.
Extreme Mean
Maximum: 51 °C 35 °C
Minimum: -5 °C 10 °C
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
o
C 9.4 12.0 16.7 21.7 27.9 32.6 34.7 33.4 30.5 24.3 16.8 11.1
7.5 Humidity
Base on available record, the average humidity for Garraf is as stipulated below:
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
% 69 64 51 43 33 23 24 26 30 42 57 66
7.6 Rainfall
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
7.7 Wind
7.9 Earthquakes
Earthquake load shall be calculated in accordance with IBC-2012, Section 1613. Site Class
for Seismic Design is Class D.
7.10 Terrain
The materials are selected based on the process requirements such as medium, pressure,
temperature, flow and the environment of the process facility. After selection of the basic
material for the specified service, a suitable piping class is selected for the design pressure
and temperature. The primary selections of the piping classes are governed by the
characteristics of individual process streams. However, the total numbers of selected piping
classes are assessed for possible standardization and limitation of component varieties. The
design limits specified in the piping classes have been derived from full rated
pressure/temperature (P/T) for flanges given in ASME B16.5 for ASME class rating up to
1500.
The summary of piping classes is given in Appendix A and details of Piping Classes are
provided in Appendix B of this document. The Material of Construction for Valves is
summarized in Appendix F.
The next three digits are for identification and have no specific meaning.
Part -3 – The first digit is used to show if any modifications has been done to the existing
piping classes. The following suffixes shall be used for these classes:
X shows 1st modification
Y shows 2nd modification
Z shows 3rd modification
V shows 4th modification
The second digit G indicates piping class is used for GFDP project.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
9 GENERAL REQUIREMENTS
Line sizes 1/8”, 1/4", 3/8”, 1 1/4", 2 1/2", 3 1/2" and the odd numbered sizes like 5” etc., shall
not be used. These sizes shall also not be used for piping in package units in no case shall
be used for terminal connections of mating pipe work.
Where equipment is supplied with non-standard nozzle size, the connection to piping shall
be adjusted to standard size by means of reducing fitting, immediately adjacent to the
equipment. This reducing fitting shall be supplied by the equipment manufacturer.
All pressures given in this Specification are gauge pressure unless specially noted.
The corrosion allowance specified for the classes shall be considered in the calculation of
the wall thickness. In no case, it shall be reduced to obtain a thinner commercially available
pipe thickness.
Fabricated pipe works and post weld heat treatment shall be in accordance with ASME B31.3,
Para 331 and Table 331.1.1. Additionally, for carbon steel pipes with thickness above 20 mm,
Post Weld Heat Treatment (PWHT) is required as per ASME B31.3. Welds requiring PWHT
shall be prefabricated as much as possible, to minimize field welds.
When Charpy V-notch testing is a requirement, it shall be conducted in accordance with
ASTM Standard A370.
Butt-weld joints shall be used for all sizes, except where other type of joints are specified in
relevant piping classes. Butt weld end preparation for pipes, fittings and flanges shall be as
per ASME B16.25.
Socket-welded ends are not permitted for this project.
Threaded joints shall not be used in process lines except for instrument air lines after the
primary block Valves and galvanized piping classes.
Threaded piping shall be assembled with sufficient unions to allow disassembly for
maintenance, however, use of unions shall be kept to a minimum.
Threaded joints (where permitted above) shall be NPT pipe threads in accordance with ASME
B1.20.1.
Positive material identification (PMI) is required for all SS, Duplex SS and Inconel 625 piping
bulk materials.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
10 MATERIALS
10.1 General
For Carbon Steel Materials, the carbon content shall be 0.23% (maximum) and the Carbon
Equivalent (CE) shall be 0.43% (maximum), which shall be determined with the following
formula.
Where:
Mn (Ni + Cu) (Cr + Mo + V)
CE = C + + +
6 15 5
All materials for Piping Classes designed as SOUR service shall fully meet the requirements
of NACE MR0175 / ISO 15156 Latest edition. Sulphur content shall not exceed 0.010% for
sour service materials.
SSC resistant materials as described in clause A.2 of NACE MR0175 / ISO 15156-2 are
acceptable for use.
Carbon Steel/Low Temp. CS material to be used in Sour service shall be subjected to HIC
testing depending upon the product form as shown in Table below (as per Para 8 of NACE
MR 0175/ ISO 15156-2).
The testing shall be carried out in accordance with NACE TM0284 in addition to the NACE
MR 0175/ ISO 15156 conformances. For all HIC testing, faces to be examined shall be as
specified in NACE TM0284.
Hydrogen-induced cracking (HIC) requirements:
Longitudinally welded piping and piping Sulphur < 0.003 % or HIC test to ISO
components made from plate 15156
The maximum hardness limit of 248 HV10 (22 HRC) in the parent material is acceptable
provided the manufacturer demonstrates during the weldability tests that the hardness in the
weld and the heat affected zone including the values within 0.5mm from the fusion line do
not exceed 248 HV10 (22 HRC).
Pipes shall be manufactured and supplied in compliance with the applicable design code.
The pipe dimensions (such as O.D, schedule, etc.) shall be in accordance with ASME
B36.10M for carbon steel and ASME B36.19M for stainless steel materials.
For piping classes indicated as Sour Service, all materials shall be in accordance with the
requirement of NACE MR0175/ISO 15156 latest edition.
The steel should be fully killed and manufactured by the electric furnace or basic oxygen
process and to fine grain low hydrogen practice.
All Pipes with sizes 3” and above shall be supplied in double random lengths and with sizes
2” and smaller shall be supplied in single random lengths.
All Pipes except galvanized shall be supplied with beveled ends. Beveled ends shall be in
accordance with ASME B16.25. Flame cut weld bevel ends are not permitted. Plain end
pipes, if mentioned, shall have Ends Square cut with burrs removed.
Carbon (CS) and Low Temperature Carbon Steel (LTCS) Pipes shall be fully killed and fine
grained and supplied in normalized or normalized and tempered condition. All stainless steel
pipes shall be supplied in solution annealed condition.
For Pipes specified as “galvanized”, galvanizing shall be in accordance with ASTM A53.
All pipes of welded construction shall be 100% radiographed. The weld seam shall be single
longitudinal.
Fittings shall be manufactured and supplied in compliance with the applicable design code.
Fittings shall be in accordance with ASME B16.9, MSS SP 75, MSS SP 97 or BS 3799 as
applicable for the type of fitting.
Reducing elbows, straight crosses and reducing outlet crosses shall not be used.
Reducing Tees and Reducers shall be with butt welded ends and shall be in accordance with
ASME B16.9. Schedule and wall thickness shall match the adjacent pipes.
Butt weld elbows shall be long radius type (radius equal to 1.5 times NPS) as per ASME
B16.9. Short radius elbows and Pipe Bends shall not be used, unless approved by
CONSULTANT / COMPANY.
All forged fittings shall be normalized. Caps shall be seamless. Tees shall be forged or
extruded. Fabricated Tees (made by joining two pipes) are not acceptable.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
90O angle branch connection shall be as defined in branch connection table. Branch
connection other than 90º angle shall be provided with reinforced pads as per ASME B31.3
requirements.
Butt welding end details shall be as per ASME B16.25.
For fittings specified as “galvanized”, galvanizing shall be in accordance with ASTM A153.
All threaded plugs shall be solid steel plugs.
All fittings of welded construction shall be 100% radiographed / ultrasonic tested.
Flanges shall be manufactured and supplied in compliance with the applicable design code.
Flanges with size 24” and below shall be in accordance with ASME B 16.5 and with size 26”
and above shall be in accordance with ASME B16.47 Series A. API rating flanges (5000,
10000) shall be in accordance with API 6A. The use of other types of flanges is subject to the
approval of the CONSULTANT / COMPANY. Slip on flanges shall not be used in place of
weld neck flanges.
All forged carbon steel flanges shall be normalized.
Flange bore shall match corresponding connecting pipe inside diameter.
Raised face flanges shall have smooth finish giving roughness of Ra 3.2 to 6.3m. For RTJ
flanges, surface finish of gasket groove shall not exceed 1.6m.
Flat face flanges shall have a stock finish giving roughness of Ra 6.3 to 12.5m. Flat face
flanges shall be provided with full-face gaskets. Where a flat face flange is specified, all
dimensions shall be to the designated standard except that the flange shall be supplied
without the raised face. Metallic flat face flanges shall be used at interface between metallic
and non-metallic piping and equipments with flat face nozzles, wherever specified.
Weld Neck Raised Face (WNRF) flanges shall be used for all metallic piping classes with
rating up to ASME Class 2500. RTJ Flanges shall be used for rating above ASME Class
2500#.
Threaded flange up to size 2” shall be used in instrument air service. Threaded flanges shall
be galvanized and as per ASME B16.5. For flanges specified as “galvanized”, galvanizing
shall be in accordance with ASTM A153.
Spectacle blinds, spades and spacers shall be manufactured and supplied in compliance with
design code ASME B16.48 for sizes up to 24”.
Spectacle blinds shall have the same contact surface finish as flanges.
Spectacle blinds shall be used up to the following sizes against class rating as given below
otherwise spades and spacers shall be used.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Size (Inch)
ASME Rating Class
Spec. Blind Spade and Spacer
150 Up to 14” 16” and Above
300 Up to 12” 14” and Above
600 Up to 6” 8” and Above
900 Up to 6” 8” and Above
1500 Up to 6” 8” and Above
Orifice Flanges shall be manufactured and supplied in compliance with design code ASME
B16.36.
Orifice Flanges shall be furnished in pairs and jack screws. Jack screw shall be made of
austenitic stainless steel.
Gaskets shall be manufactured and supplied in compliance with the applicable design code.
The selection of type of Gaskets for raised face, flat face, and ring type joints shall be in
accordance with the relevant piping class.
For ASME rating flanges, all gaskets shall be suitable to be mounted between flanges as per
ASME B16.5 for sizes upto 24” and ASME B16.47 Series A for sizes above 24”. For API
rating flanges (5000 and 10000), RTJ gaskets shall be provided according to API 6A.
Compressed Asbestos Fiber (CAF) and Man Made Mineral Fibers (MMMF) shall not be used.
The use of compressed asbestos fiber gaskets as a jointing material or asbestos in any valve
packing is strictly prohibited. If graphite-based materials cannot be used, e.g. for product
contamination reasons, RPTFE-based materials shall be applied up to a maximum
temperature of 250 °C.
Full face gaskets shall be used in all flat faced flanged joints. Dimensions for flat face flange
gaskets shall be in accordance with ASME B16.21.
Spiral wound graphite-filled gaskets shall be used instead of spiral wound asbestos-filled
gaskets. Spiral wound gaskets, with inner rings shall be used to provide additional strength.
Spiral wound gaskets shall be in accordance with ASME B16.20 with thickness of minimum
4.5 mm in uncompressed state and 3.2 mm after compression.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Ring Joint Type (RTJ) gaskets shall be used for class above ASME Class 2500. RTJ Gaskets
shall comply with requirements in accordance with API 6A. RTJ Gaskets shall be octagonal
in cross section. The hardness and surface finish of RTJ metallic gaskets shall be as per API
6A or as mentioned in respective piping classes. Surface finishes shall pertain to the gasket-
sealing surfaces.
Gasket components made from austenitic stainless steel to ASTM A240-TP316 (L) as
applicable wherever, the product shall be in a solution annealed condition, before assembly.
Gaskets made of austenitic stainless steel shall be capable of successfully passing Inter
Granular Corrosion test in accordance with ASTM A262, practice E.
For sour service, gaskets shall comply with the requirements of NACE MR 0175 / ISO 15156
– latest edition.
Bolting shall be manufactured and supplied in compliance with the applicable design code.
The material for bolting shall be as per respective piping class. Unless otherwise noted, bolt
diameters shall be in accordance with ASME B16.5 (for flange size 24” and smaller), ASME
B16.47 Series A (for flange size above 24”) and as per API 6A (for RTJ flanges).
Stud bolts shall be threaded full length. The length shall be the effective thread length,
excluding end points.
Each stud-bolt shall be supplied with minimum two heavy hexagonal nuts unless otherwise
specified.
Bolting and screw threads shall be UNC for 1” and smaller diameters and 8 UN for large
diameters, Class 2 fit, in accordance with ASME B1.1.
All carbon steel and alloy steel stud bolts shall be Zn Ni/Ceramic Metal Coated + fluorocarbon
coated (FCC).
Hydraulic bolt tensioning shall be used for tightening the bolts of flanged connections of
equipment and piping where conditions require the stress distribution in the bolts to be
properly controlled to obtain a reliable joint.
These conditions generally occur at high pressure and elevated temperature in conjunction
with a medium which is difficult to seal. Hydraulic bolt tensioning shall be applied in the
following cases:
Additional bolt length of 1.5 x Bolt Diameter (minimum) is required to cater for the hydraulic
bolt tensioning equipment. Also additionally, one extra nut is required.
Hardness of bolts / nuts material shall be as per the applicable ASTM standards. All bolting
materials designated for use in sour service shall comply with the requirements of NACE MR
0175 / ISO 15156.
The End of Bolts and Face of Nuts shall be Square with respect to the Centre line.
16 THERMOWELLS
Immersion lengths shall be chosen accordingly from the following table, based on the process
connection nozzle projection length shown from the outer wall of the process pipe / equipment
to the flange face of the nozzle:
Note:
1. Thermo well length is based on nozzle standout indicated above.
2. Any pipeline less than 4” NB shall be locally enlarged to 4”, to install the thermowell
unless the thermowell can be located on a flowing elbow.
3. Wake Frequency calculation as per ASME PTC 19.3 shall be carried out for all
thermowells.
Piping speciality items are engineered items not found in the piping material line classes.
Piping speciality items require an engineering data sheet for enquiry and purchase. The data
sheet will include information on the design / operating conditions, flow rates, material
requirements, connection details and other relevant data.
Speciality items generally fall into two categories:
a) Non-process related where information required specifying the items can be located in
line designation tables and piping material classes. These items include Swivel Joints,
Sample Coolers, and Insulating Gaskets etc.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
a) Process related items where additional information to that required for category (a) above
is necessary for procurement. These items include Spray Nozzles, Flame Arrestors,
Quick Coupling, Sampling Connection. etc.
The type of strainers to be used (such as Y-type, T-type, bucket Type, Cone Type, etc.) shall
be as per P&IDs. Materials shall be as per relevant Piping Classes.
An out of class piping item such as higher rated flanges for a control valve or short radius
elbow is not considered as specialty item.
GA Gate Valve
GL Globe Valve
CP Piston Lift Check Valve
CW Wafer Lug Check Valve
CS Swing Check Valve
BF Ball valve Full Bore
BR Ball Valve Reduced Bore
DB Double Block and Bleed Valve
NE Needle Valve
BU Butterfly Valve
1 ASTM A105N
2 ASTM A216 Gr. WCB
3 ASTM A350 Gr. LF2 CL.1
4 ASTM A352 Gr. LCC
5 ASTM A182 Gr. F316/316L
6 ASTM A351 Gr. CF8M
7 ASTM B564 UNS N06625
8 ASTM A494 CW6MC
9 ASTM B148 UNS C95400
A ASTM A182 Gr. F51
B ASTM A890 Gr. 4A
C ASTM A182 Gr. F52
D ASTM A890 Gr. 5A
E ASTM A216 Gr. WCB + 3mm UNS S32950 Weld
Overlay
F ASTM A105 + 3mm UNS S32950 Weld Overlay
A Automatic
L Lever Operated
H Handwheel Operated
G Gear Operated
N Sour Service
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
For example, Valve Tag Number GA1114HN is Gate Valve, 150#, Raised Face, Body: ASTM
A105N, Trim: SS316 + Stellite 6, Handwheel operated, Sour Service (NACE MR0175 / ISO
15156).
18.2 General
Valves shall be manufactured and supplied in compliance with the applicable design code
specified in valve data sheets.
All valves shall be suitable for services and conditions shown in the respective valve data
sheets and piping classes. Valves shall meet the class rating requirements of ASME B16.34
as applicable, except where otherwise specified in relevant valve data sheets. The
MANUFACTURER/SUPPLIER/VENDOR shall confirm the valve pressure/ temperature
rating at the bidding stage.
MANUFACTURER/SUPPLIER/VENDOR is required to provide guarantee for the trouble-free
performance of the valves covered under this specification. The materials of construction
given in the data sheets are project minimum requirements and the
MANUFACTURER/SUPPLIER/VENDOR is fully responsible to ensure the service life
considering the type of fluid given in the data sheets /piping classes.
Carbon equivalent shall be as per Section 8.1 General (Materials) of this document.
All materials and fabrication for sour service shall comply with NACE MR0175/ ISO15156
latest edition.
All valves shall be of Fire safe design as per API 6FA, API 607, BS EN ISO 10497 as
applicable.
Materials requiring impact testing shall be in accordance with ASME B31.3, Para 323.3.
Method of testing shall be in accordance with ASTM A370.
Carbon Steel Valves used in Piping Classes having corrosion allowance greater than 3.0mm
shall have minimum body wall thickness increased in accordance with ASME B16.34
as noted on the Valve Datasheets.
Specific device for locking facilities shall be provided for all LO/LC valves specified in P&IDs.
All block valves shall be of bi directional construction.
Lifting eyes shall be provided for valves 250Kg and heavier to facilitate maintenance.
Support Lugs shall be provided for valves 250Kg and heavier to facilitate the support beneath
the valve.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Uni-directional valves, check valves or any valves with preferred flow direction where such
designs have been approved by COMPANY shall have a directional arrow mark integral with
the body.
For Flanged end valves, the end flanges shall be integrally cast or forged with body. Valves
with welded-on end flanges shall not be permitted.
Valves with non-rising stem or valves with gear operators shall have position indicators, which
cannot be wrongly oriented, either on initial assembly or during subsequent dismantling and
re-assembly. These shall be clearly graduated and visible to show the open and closed
position of the fully assembled valve.
Stem design shall be of anti-blow out design. The anti blowout stem/body configuration shall
be capable of withstanding the full internal pressure of the valve as per appropriate class.
Stem retention by means of body/stem threads is not acceptable. The stem retainer ring or
collar shall be integral with the stem.
When valves are provided with soft seats, their design shall ensure electric continuity
between the ball and the body, by means of an antistatic device.
There shall be minimum hardness differential of 50 BHN between body and closure seating
surfaces on stainless steel valves.
For sour service, all metal to metal seated valves, the maximum hardness of the body seats,
body back seats and the closure (gate, wedge, disc, blade, etc.) seating surfaces shall be as
per NACE MR0175 /ISO15156.
Face to Face dimensions of flanged valves shall be in accordance with ASME B16.10 and
for dual plate check valves shall be as per API 594 type A.
ENP (Electroless Nickel Plating) on carbon steel and stainless steel surfaces is not
acceptable for any valve component.
Valves shall be designed to operate freely after the stem has remained in one position for an
extended period of service or till the next periodic maintenance.
Elastomeric seals shall be Anti Explosion Decompression (AED) type as applicable.
Bonnet/Cover gaskets for the valves shall be suitable for the service condition specified in
the data sheets.
Gasket contact surface for end flanges shall have surface roughness finishes as follows:
For Spiral Wound Gaskets : Smooth Finish - Ra 3.2µm – 6.3 µm
For Metallic Ring Joint Gaskets : Smooth Finish – Ra 1.6 µm
For Flat Gaskets : Serrated Finish – Ra 6.3 µm – 12.5 µm
Stem packing for all the valves shall be individual rings of square cross section expanded
graphite or braided yarn, treated with a suitable corrosion inhibitor.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
The temperature range for the packing shall be consistent with the maximum/ minimum
design temperature for the valves specified.
Gate, Globe and needle valves shall have provision of emergency stem packing injection
under full line pressure.
Where “PTFE” gaskets, stem seals, gland packing, etc., are specified, the material shall be
virgin or glass fiber-reinforced polytetrafluoroethylene (RPTFE).
Where “Graphite” on gaskets, stem seals, gland packing, etc., are specified, the material shall
be Graphlock/ Garlock Style 98 or equal to control fugitive emissions. Graphite packing shall
contain a corrosion inhibitor to prevent oxidation of the stem.
Bonnet Gaskets shall have corrosion resistance equal, at least, to that of the body and bonnet
materials. Asbestos shall not be used in any case.
18.5 Operator
Methods of valve operation shall be by direct manual operation or through gear operator as
further detailed below.
ASME Class / Rating Ball and Butterfly Valve Gate Valve Globe Valve
150 6” and Larger 14” and Larger -
300 6” and Larger 10” and Larger -
600 6” and Larger 6” and Larger 6” and Larger
900 4” and Larger 4” and Larger 4” and Larger
1500 4” and Larger 4” and Larger 4” and Larger
Ball valves shall be designed and supplied in accordance with BS EN ISO 17292 for sizes
up to 1 1/2” and API 6D / ISO14313 for sizes 2” and above.
The table below serves as a guide in selecting the appropriate ball valve for the service.
Trunnion mounted valves shall be provided with protection against accumulation of ingress
particles in the trunnion house.
All ball valves shall be designed to provide automatic body cavity pressure relief to prevent
over-pressurization of the valve body when the valve is closed. Design of ball valves shall be
such that it allows design pressure applied at either ends at a time or simultaneously (DBB
Sealing Design). MANUFACTURER/SUPPLIER/VENDOR shall submit, in the quotation, a
full explanation of the proposed method of achieving this requirement, including drawings or
sketches.
The ball and stem of all ball valves shall be of solid construction of the material specified.
Fabricated type ball (i.e. with welded in liner) are not acceptable.
Bore for Ball Valves shall be 'Reduced Bore' unless otherwise specified in valve data sheet.
Reduced Bore Ball Valves shall have minimum reduction in bore size as per clause 6.2.2 of
API 6D/ISO 14313 for size up to 24”.
All Ball valves shall be "Fire Safe" in accordance with API-607/API 6FA/ BS EN ISO 10497
and have anti-static devices fitted in accordance with BS EN ISO 17292.
Ball valves shall be designed to seal in both directions, i.e. bi-directional, against all pressures
up to the maximum service pressure rating for the class unless otherwise specified in the
valve data sheet.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
The design of soft seated valve seal / seat arrangement shall be such that the soft seal shall
not displace or get out of shape both under pressure and during the depressurization of the
piping system.
18.7 Specific requirements for Double Block & Bleed (DBB) valves
The double block & bleed shall be of integral modular body design (single forged piece) with
two ball valves for isolation and one needle valve for bleed.
The design of DBB valves shall be as per manufacturer’s standard. However, the ball valves
shall be in accordance with BS EN ISO 17292 and bleed in accordance with ASME B16.34.
Handles / wrench position for primary isolation and secondary isolation valve shall be on
opposite directions. Handles / wrench shall be tubular type, not plate type. The size and
material requirements shall be as specified in the valve data sheets.
In general, the end connection of DBB valve shall be flanged at piping end and 1/2” NPT
female threaded at instrument end.
The Gate valves of size 2” and larger shall be designed and supplied in accordance with API
600. The small bore valves (1 1/2” and smaller) shall be in accordance with API 602.
The design, construction and material requirements shall be as specified in the valve data
sheets.
All Gate Valves shall be provided with back seating facility. Valves shall be provided with
renewable seats for size 2” and larger.
Gate Valves shall be with solid wedge for sizes up to size 1 1/2” and flexible wedge for sizes
2” and larger, outside screw and yoke with non-rising hand wheel. Gate valves shall be
provided with locking facilities by means of suitable brackets.
Hard facing with Stellite 6 shall be applicable for all gate valves body, wedge and backseat.
The Globe valves of size 1 1/2" and below shall be designed and supplied in accordance with
BS EN ISO 15761 and for sizes 2” and above in accordance with BS 1873.
All globe valves shall be suitable for throttling duties. An arrow, to indicate the correct flow
direction shall be part of the body casting or forging or shall be embossed on the valve body.
Gear operated valves shall have operators of a design that will allow the valve to be set in
intermediate throttling positions for long periods without having to lash down the hand wheel.
Globe Valves shall be provided with locking facilities by pad locking without chain. Valves
shall be provided with back seating facility. Hard facing with Stellite 6 shall be applicable for
all globe valves body, disc and backseat.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
The check valve shall be piston lift type for size 1 1/2" and below and dual plate wafer lug
type for size 2” and above, unless otherwise stated elsewhere.
The Check valves of size 1 1/2" and below shall be designed and supplied in accordance
with BS EN ISO 15761 and for size 2” and above in accordance with API 594 Type A. Dual
plate check valves shall be of retainer less design.
The valves with wafer design or solid lug type design shall cover the stud bolt over the entire
length of the valve.
Swing type check valves, if used, shall be suitable for horizontal and vertical upward flows
and shall be designed and supplied in accordance with API 594 Type B.
Hard facing with Stellite 6 shall be applicable for all check valves body, piston/plate seats.
The Butterfly valves shall be designed and supplied in accordance with API 609. The lining
for valves, if applicable, shall be in accordance with BS EN 593.
Lever operated valves shall have throttling levers of the notched plate design to allow positive
positioning in a maximum number of intermediate positions.
Gear operated valves shall have operators of a design that will allow the valves to be set in
intermediate throttling positions for long periods without having to lash down the hand wheel.
Disc strength shall be carried out for valves with size 14” and above as per BS EN 593 and
shall be submitted for COMPANY approval.
If applicable, tapped holes in body lugs for through bolting will not be acceptable. Where
tapped holes are necessary because the valve body design does not allow through bolting
for every bolt, Vendor shall identify, in its quotation (by indicating the item no. of Material
Requisition), which valves require tapped holes and shall include in its quotation, a list stating
the quantity, diameter and effective thread length of the tapped holes for each relevant size
and rating of valve on the requisition.
These tapped holes shall be identified, with the diameter and effective thread length, on the
relevant Vendor drawing for each valve where required.
These tapped holes shall have UNC threads for 1” and smaller diameter threads and 8 UNC
threads for larger diameter, with Class-2 fit in accordance with ASME B1.1.
The design of valves shall be such that the mating pipe work bore shall have adequate disc
swing clearance.
Butterfly Valves shall be provided with integral shouldered shaft to prevent shaft/stem blowout
and to ensure precise positioning of disc.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
18.12 Materials
Material of construction for valves shall be as specified in the respective data sheets.
Materials requiring impact testing shall be in accordance with ASME B31.3, Para 323.3.
Method of testing shall be in accordance with ASTM A370.
All materials shall be brand new, unused, free from defects and identifiable against their
material certificates.
All materials and fabrication for sour service shall comply with NACE MR0175/ ISO 15156.
For sour service, MANUFACTURER/SUPPLIER/VENDOR shall conduct hardness test on
finished components to ensure that the hardness requirements of NACE MR0175 /ISO 15156
are met. Where hardness values in excess of the requirements of NACE Standard are
obtained, the part shall be rejected.
Cast iron shall not be used. Where pressure retaining parts have been specified as forged,
substitution of castings is not permitted without prior authorization by COMPANY.
Castings shall not be impregnated with sodium silicate or any other material to prevent
leakage during pressure testing.
Valve internals (Items other than Body and other pressure retaining parts) manufactured as
Forged Construction only are acceptable. Casting is not acceptable for Valve internals.
All CS and Low Alloy Steel Bolts and Nuts shall be Zn Ni/Ceramic Metal Coated +
fluorocarbon coated (FCC).
Elastomeric seal/seat material if used in valves shall be AED (Anti explosion decompression)
type.
For weld repair qualification the MANUFACTURER/SUPPLIER/VENDOR shall carry out heat
treatment, NDE and Charpy impact testing appropriate to the material being repaired.
The vendor shall carry out the repair of welds after receiving of written approval from
CONSULTANT / COMPANY, of the weld procedure and qualification tests.
All items shall be inspected and tested in accordance with relevant ASTM, ASME, MSS and
BS standards.
All pipes and fittings with welded construction shall be 100% radio graphed / Ultrasonic tested
in accordance with the individual ASTM Standard.
Examinations and / or tests of MANUFACTURER/SUPPLIER/VENDOR items may be
reviewed and / or witnessed by the CONSULTANT / COMPANY or their authorized third party
inspector at the MANUFACTURER/SUPPLIER/VENDOR's facility.
The MANUFACTURER/SUPPLIER/VENDOR is responsible for informing the EPC
CONTRACTOR about the availability of goods for inspection and testing.
Valve hydrostatic testing shall be as per BS EN 12266-1 & 2 (Supersedes BS 6755 Part 1)
or API 598 as appropriate or as specified in the valve data sheets. However, the valve
hydrotest pressure shall be as per ASME B16.34 based on Material group and Class Rating.
Brand new unused gaskets shall be installed in valve bonnet and cover joints that were
opened for any reason during the course of testing.
Any valve gland packing or stem seal that leaked during testing shall be replaced with brand
new material following thorough drying of the gland and packing cavity. Shell and Seat
hydrostatic testing shall then be repeated for these valves.
Unless otherwise stated, the material certification type shall be as per EN 10204 type 3.2 for
sour service materials and EN 10204 type 3.1 for non-sour service materials.
Following testing, all components, especially valve body cavities, shall be thoroughly dried
prior to preparation for packing and shipment. All gasket surfaces shall be thoroughly cleaned
and dried prior to preparation for packing and shipment.
Fire safe test shall be as per BS EN ISO 10497 (Supersedes BS 6755 Part 2) or API 6FA.
All valves offered shall have qualified Fire test certification. Antistatic device test shall be as
per BS EN 12266-1&2 (Supersedes BS 6755 Part 2).
Marking of the all piping components shall be done as per MSS SP 25.
Packaging, marking, preservation and shipping shall be done in accordance with ASTM
A700.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Material shall be packed ready for export in a manner which allows easy handling and
prevents damage. MANUFACTURER/SUPPLIER/VENDOR shall submit their standard
packing procedure to CONSULTANT / COMPANY for approval.
Pipe ends shall be protected with hard plastic caps.
Thin wall pipes shall not be overloaded with multi-layer of pipes while shipping. All thin wall
pipes shall be braced suitably at the end to avoid ovality.
Open ends of fittings and flanges shall be protected properly.
All valves shall be packaged in the full open position. Valves shipped with mounted actuators
shall be packaged in a manner that will prevent damage while in transit. The package shall
be adequately protected against corrosion and mechanical damage during shipment to Plant
site and outdoor storage.
Water proof barrier material shall be used for stainless steel materials to protect against
chlorine attack by exposure to salt water atmosphere.
Carbon steel and stainless steel items are not allowed to be stored together and shall be
packed separately.
Piping Assembly details for general instruments, vents and drain connections on piping shall
be as per Standard Piping Connection Details Doc. No. GF-OGF4-J-37-8001.
Painting and Coating shall be as per Specification for coating and painting Doc No. GF-
OGF4-R-SP-1001.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
APPENDIX-A
SUMMARY OF PIPING CLASSE
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Design Design
Piping Design ASME Class C.A. PWHT RT MT PT
Service Fluid Matl. Pipe Pressure Temp. Notes
Class Code / Facing mm (Note 1.6) (Note 1.3) (Note 1.4) (Note 1.5)
(barg) (ºC)
Utility / Plant Air (AU),
Nitrogen (NT), Vent (Atm) ASME 19.6 to -29 to
011412XG Non Sour Cl.150 / RF 1.0 CS A106 Gr.B NO 10% 10% -
(VA), Fuel Gas (FG), Hot B31.3 16.6 120
Oil (HO)
River Water (RW),
Produced Water (WO),
ASME A106 Gr.B / A672 19.6 to -29 to
011432XG Waste Water (WW), Non Sour Cl.150 / RF 3.0 CS NO 10% 10% -
B31.3 Gr.C65 Cl.22 15.8 150
Water Injection LP (WI),
Diesel Fuel (FD)
Closed Drains (DC),
Open Drains (DH & DN),
ASME A106 Gr.B / A672 19.6 to -29 to 2.1, 2.2, 2.3,
011440XG Vent (Atm) (VA), Flare Sour Cl.150 / RF 3.0 CS YES 100% 100% -
B31.3 Gr.C65 Cl.22 15.8 150 2.7
(Atm) (FA), Process Gas
(PG), LP Flare (FL)
Closed Drains (DC),
Open Drains (DH & DN),
ASME 19.6 to -29 to 1.8, 2.1, 2.2,
011441XG Vent (Atm) (VA), Flare Sour Cl.150 / RF 3.0 CS A106 Gr.B YES 100% 100% -
B31.3 15.8 150 2.3, 2.7
(Atm) (FA), Process Gas
(PG)
Closed Drains (DC),
Open Drains (DH & DN), ASME 19.6 to -29 to 2.1, 2.2, 2.3,
011440YG Sour Cl.150 / RF 6.0 CS A106 Gr.B YES 100% 100% -
Process Water (PW), B31.3 15.8 150 2.7
Process Gas (PG)
GENERAL NOTES
1.1 THIS ATTACHMENT DOES NOT INCLUDE INSTRUMENTATION TUBING.
1.2 NDE REQUIREMENTS AND OTHER TESTING REQUIREMENTS SHALL BE IN ACCORDANCE WITH ASME B31.3.
1.3 RT- RADIOGRAPHIC TESTING APPLICABLE TO BUTT WELDS ONLY.
1.4 MT-MAGNETIC PARTICLE EXAMINATION APPLICABLE TO FILLET AND BRANCH WELDS.
1.5 PT-DYE PENETRANT EXAMINATION APPLICABLE TO FILLET AND BRANCH WELDS.
1.6 PWHT IS BASED ON ASME B 31.3, TABLE 331.1.1. WHERE EVER "NO" IS STATED, PWHT IS NOT REQUIRED, AS THE THICKNESSES ARE LESS THAN THE LIMITS
SPECIFIED IN
ASME B 31.3. WHERE "YES" IS STATED, PWHT SHALL BE AS SPECIFIED IN CLAUSE 2.3 MENTIONED BELOW. PWHT SHALL BE CARRIED OUT IN ACCORDANCE
WITH ASME B31.3.
1.7 FOR VALVE BODY, TRIMS, PACKING AND SEAL MATERIALS ETC. REFER ATTACHMENT B OF THIS DOCUMENT.
1.8 THIS PIPING CLASS SHALL BE USED AT YAMAMA PRODUCTION.
SPECIFIC NOTES
2.1 ALL MATERIALS FOR SOUR SERVICE SHALL CONFORM TO NACE MR 0175/ISO15156 AND ALL WELDED PIPES SHALL QUALIFY HIC TEST AS PER NACE TM 02 84.
2.2 MATERIAL OF CONSTRUCTION FOR VALVES AND OTHER METALLIC WETTED PARTS SHALL CONFORM TO NACE MR 0175/ISO15156 FOR SOUR SERVICE.
2.3 FOR CARBON STEEL PIPING IN SOUR SERVICE THE REQUIREMENT OF NACE MR 0175/MR ISO 15156 SHALL BE FULFILLED FOR ALL WELDS. ADDITIONALLY,
FOR C.S. PIPING
EXCEEDING 20 MM WALL THICKNESS, PWHT IS REQUIRED AS PER ASME B31.3.
2.4 IMPACT TESTING SHALL BE IN ACCORDANCE WITH ASME B31.3, PARA.323.3. THE METHOD OF TESTING TO BE IN ACCORDANCE WITH ASTM A370.
2.5 ALL AUSTENITIC STAINLESS FORGINGS SHALL BE 100% LIQUID PENETRANT EXAMINED AS PER ASTM A961 SUPPLEMENTARY REQUIREMENTS S56, WITH
ACCEPTANCE CRITERIA
TO ASME B16.34, ANNEX-D.
2.6 ALL AUSTENITIC STAINLESS STEEL COMPONENTS SHALL BE ANNEALED CONDITION AS PER ASTM A182, SUPPLEMENTARY REQUIREMENT S3.
2.7 100 % HARDNESS TESTING OF WELDMENTS ARE REQUIRED FOR MATERIALS USED FOR SOUR SERVICE, STRESS RELIEVING LINES ETC.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
APPENDIX-B
DETAILS OF PIPING CLASSES
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011412XG
Service AU, NT, VA, HO Corrosion Allowance 1 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 120
Pressure Bar g 19.6 19.6 19.2 17.7 16.6
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 011412XG
Service AU, NT, VA, HO Corrosion Allowance 1 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 120
Pressure Bar g 19.6 19.6 19.2 17.7 16.6
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
600# /
Thickness RF /
WN Flange 1/2 2 ASTM A105N, ASME B16.5 Note 6
Same As 3.2-6.3 m
Pipe
1500# /
Thickness RF /
WN Flange 1/2 24 ASTM A105N, ASME B16.5 Note 7
Same As 3.2-6.3 m
Pipe
300# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 14 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 16 24 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Gasket 1/2 24 150# -
Spiral Wound, Graphite filled,
Gasket 1/2 24 300# - SS316 Winding, SS 316 Inner Ring Note 2
Gasket 1/2 2 600# - / CS Centering Ring, ASME B16.20, Note 6
Thk.=4.5mm
Gasket 1/2 24 1500# - Note 7
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr. B7
Stud Bolt / Nut 1/2 24 All -
/ A194 Gr. 2H, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF1115L
Body:A105N, Ball: SS316,PTFE,
1/2 1 1/2 150# Note 1
Floating Ball, ISO 17292, Lever
Operated,
BF1125L
Body:A216 Gr. WCB, Ball: SS316,
2 4 150# Note 1
PTFE, Floating Ball, API 6D, Lever
Flanged RF Operated,
Ball Valve (FB)
/ 3.2-6.3 m BF1125G
Body:A216 Gr. WCB, Ball: SS316,
6 8 150# Note 1
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BF112UG
Body:A216 Gr. WCB, Ball: CS +
10 24 150# Note 1
3mm SS316 Weld Overlay, PTFE,
Trunnion Mounted, API 6D, Gear
BR1115L
Flanged RF Body:A105N, Ball: SS316,PTFE,
Ball Valve (RB) 1/2 1 1/2 150#
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011412XG
Service AU, NT, VA, HO Corrosion Allowance 1 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 120
Pressure Bar g 19.6 19.6 19.2 17.7 16.6
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR1125L
Body:A216 Gr. WCB, Ball: SS316,
2 4 150#
PTFE, Floating Ball, API 6D, Lever
Operated,
BR1125G
Body:A216 Gr. WCB, Ball: SS316,
6 8 150#
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR112UG
Body:A216 Gr. WCB, Ball: CS +
10 24 150#
3mm SS316 Weld Overlay, PTFE,
Trunnion Mounted, API 6D, Gear
GA1114H
Body:A105N, Wedge:SS316 +
1/2 1 1/2 150#
Stellite 6, API 602, Handwheel
Operated,
GA1124H
Body:A216 Gr. WCB,
2 8 150#
Wedge:SS316 + Stellite 6, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA112UH
Body:A216 Gr. WCB, Wedge:CS +
10 12 150#
3mm SS316 Weld Overlay, API
600, handwheel Operated,
GA112UG
Body:A216 Gr. WCB, Wedge:CS +
14 24 150#
3mm SS316 Weld Overlay, API
600, Gear Operated,
GL1114H
Flanged RF Body:A105N, Disc:SS316 + Stellite
1/2 1 1/2 150#
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
Globe Valve
GL1124H
Flanged RF Body:A216 Gr. WCB, Disc:SS316 +
2 8 150#
/ 3.2-6.3 m Stellite 6, BS 1873, Handwheel
Operated,
NE1114H
Flanged RF Body:A105N, Disc:SS316 + Stellite
Needle Valve 1/2 1 1/2 150# Note 4
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
CP1114A
Flanged RF
1/2 1 1/2 150# Piston Lift Type, Body:A105N,
/ 3.2-6.3 m
Disc:SS316 + Stellite 6, ISO 15761,
Check Valve CW1924A
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 150#
3.2-6.3 m A216 Gr. WCB, Disc:SS316 +
Stellite 6, API 594 Type A,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011412XG
Service AU, NT, VA, HO Corrosion Allowance 1 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 120
Pressure Bar g 19.6 19.6 19.2 17.7 16.6
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CW192UA
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 24 150# A216 Gr. WCB, Disc: CS + 3mm
3.2-6.3 m
SS316 Weld Overlay,
API 594 Type A
Flanged RF DB1715L
Double Block and
1/2 2 150# (3.2-6.3 m) Body:A105N, Ball: SS316,PTFE, Note 5
Bleed Valve
x NPT(F) Floating Ball, Lever Operated,
Notes:
Class 011432XG
Service RW, WO, WW, WI, FD Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 011432XG
Service RW, WO, WW, WI, FD Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
26 18 Thickness
ASTM A234 Gr. WPB, Welded,
x x Same As BW
ASME B16.9
48 46 Pipe
ASTM A106 Gr. B, Seamless,
Nipple 1/2 1 1/2 Sch.160 BBE
ASME B36.10M, L=100mm
Thickness
Weldolet 1/2 12 Same As BW ASTM A105N, MSS SP 97 Note 3
Pipe
150# /
Thickness RF / ASTM A105N, MFG. STD., Flanged
Flangeolet 1/2 2 Note 3
Same As 3.2-6.3 m end as per ASME B16.5
Pipe
1/2 24 150# / ASTM A105N, ASME B16.5
Thickness RF /
WN Flange
26 48 Same As 3.2-6.3 m ASTM A105N, ASME B16.47 SR.A
Pipe
1/2 24 RF / ASTM A105N, ASME B16.5
Blind Flange 150#
26 48 3.2-6.3 m ASTM A105N, ASME B16.47 SR.A
1/2 24 300# / ASTM A105N, ASME B16.5 Note 2
Thickness RF /
WN Flange
26 48 Same As 3.2-6.3 m ASTM A105N, ASME B16.47 SR.A Note 2
Pipe
RF /
Blind Flange 1/2 24 300# ASTM A105N, ASME B16.5 Note 2
3.2-6.3 m
1500# /
Thickness RF /
WN Flange 1/2 24 ASTM A105N, ASME B16.5 Note 6
Same As 3.2-6.3 m
Pipe
150# /
FF /
Thickness
WN Flange 2 24 6.3 to 12.5 ASTM A105N, ASME B16.5 Note 7
Same As
m
Pipe
300# /
FF /
Thickness
WN Flange 2 24 6.3 to 12.5 ASTM A105N, ASME B16.5 Note 8
Same As
m
Pipe
300# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 14 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
16 24 RF / ASTM A516 Gr. 70, ASME B16.48
Blind and Spacer 150#
26 48 3.2-6.3 m ASTM A516 Gr. 70, ASME B31.3
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011432XG
Service RW, WO, WW, WI, FD Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 48 150# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 48 300# - Note 2
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 15 1500# - Note 6
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr. B7
Stud Bolt / Nut 1/2 48 All -
/ A194 Gr. 2H, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF1115L
Body:A105N, Ball: SS316,PTFE,
1/2 1 1/2 150# Note 1
Floating Ball, ISO 17292, Lever
Operated,
BF1125L
Body:A216 Gr. WCB, Ball: SS316,
2 4 150# Note 1
PTFE, Floating Ball, API 6D, Lever
Operated,
Flanged RF
Ball Valve (FB) BF1125G
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: SS316,
6 8 150# Note 1
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BF112UG
Body:A216 Gr. WCB, Ball: CS +
10 48 150# 3mm SS316 Weld Overlay, PTFE, Note 1
Trunnion Mounted, API 6D, Gear
Operated,
BR1115L
Flanged RF Body:A105N, Ball: SS316,PTFE,
Ball Valve (RB) 1/2 1 1/2 150#
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
BR1125L
Body:A216 Gr. WCB, Ball: SS316,
2 4 150#
PTFE, Floating Ball, API 6D, Lever
Flanged RF Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR1125G
Body:A216 Gr. WCB, Ball: SS316,
6 8 150#
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011432XG
Service RW, WO, WW, WI, FD Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR112UG
Body:A216 Gr. WCB, Ball: CS +
10 48 150# 3mm SS316 Weld Overlay, PTFE,
Trunnion Mounted, API 6D, Gear
Operated,
GA1114H
Body:A105N, Wedge:SS316 +
1/2 1 1/2 150#
Stellite 6, API 602, Handwheel
Operated,
GA1124H
Body:A216 Gr. WCB,
2 8 150#
Wedge:SS316 + Stellite 6, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA112UH
Body:A216 Gr. WCB, Wedge: CS +
10 12 150#
3mm SS316 Weld Overlay, API
600, Handwheel Operated,
GA112UG
Body:A216 Gr. WCB, Wedge: CS +
14 48 150#
3mm SS316 Weld Overlay, API 600
/ ASME B16.34, Gear Operated,
GL1114H
Body:A105N, Disc:SS316 + Stellite
1/2 1 1/2 150#
6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL1124H
Body:A216 Gr. WCB, Disc:SS316 +
2 8 150#
Stellite 6, BS 1873, Handwheel
Operated,
NE1114H
Flanged RF Body:A105N, Disc:SS316 + Stellite
Needle Valve 1/2 1 1/2 150# Note 4
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
CP1114A
Flanged RF
Check Valve 1/2 1 1/2 150# Piston Lift Type, Body:A105N,
/ 3.2-6.3 m
Disc:SS316 + Stellite 6, ISO 15761,
CW1924A
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 150#
3.2-6.3 m A216 Gr. WCB, Disc:SS316 +
Stellite 6, API 594 Type A
Check Valve CW192UA
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 48 150# A216 Gr. WCB, Disc: CS + 3mm
3.2-6.3 m
SS316 Weld Overlay, API 594 Type
A
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011432XG
Service RW, WO, WW, WI, FD Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S.
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Flanged RF DB1715L
Double Block and
1/2 2 150# (3.2-6.3 m) Body:A105N, Ball: SS316,PTFE, Note 5
Bleed Valve
x NPT(F) Floating Ball, Lever Operated,
BU1124L
Body: A216 Gr.WCB, Disc: SS316
3 4 150#
+ Stellite 6, Shaft: SS 316, API 609
Cat. B, Lever Operated
BU1124G
Double Body: A216 Gr.WCB, Disc: SS316
6 8 150#
Butterfly Valve Flanged RF + Stellite 6, Shaft: SS 316, API 609
/ 3.2-6.3 m Cat. B, Gear Operated
BU112UG
Body: A216 Gr.WCB, Disc: CS +
10 48 150# 3mm SS316 Weld Overlay, Shaft:
SS 316, API 609 Cat. B, Gear
Operated
Notes:
Class 011440XG
Service DC, DH, DN, VA, FA, PG, FL Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 011440XG
Service DC, DH, DN, VA, FA, PG, FL Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
300# /
Thickness RF /
WN Flange 1/2 24 ASTM A105N, ASME B16.5 Note 2
Same As 3.2-6.3 m
Pipe
RF /
Blind Flange 1/2 24 300# ASTM A105N, ASME B16.5 Note 2
3.2-6.3 m
600# /
Thickness RF /
WN Flange 1/2 2 ASTM A105N, ASME B16.5 Note 7
Same As 3.2-6.3 m
Pipe
1500# /
Thickness RF /
WN Flange 1/2 4 ASTM A105N, ASME B16.5 Note 8
Same As 3.2-6.3 m
Pipe
300# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 14 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 16 24 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316L Winding, SS 316L Inner
Gasket 1/2 24 150# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled, SS316
Winding, SS 316L Inner Ring / CS
Gasket 1/2 24 300# - Note 2
Centering Ring, ASME B16.20
Thk.=4.5mm
Spiral Wound, Graphite filled, SS316
Winding, SS 316L Inner Ring / CS
Gasket 1/2 2 600# - Note 7
Centering Ring, ASME B16.20
Thk.=4.5mm
Spiral Wound, Graphite filled, SS316
Winding, SS 316L Inner Ring / CS
Gasket 1/2 4 1500# - Note 8
Centering Ring, ASME B16.20
Thk.=4.5mm
Bolt Full threaded, Heavy Hexagonal
Nut, ASTM A193 Gr. B7M / A194 Gr.
Stud Bolt / Nut 1/2 24 All -
2HM, Zn Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF111HLN
Flanged RF Body:A105N, Ball: 13%Cr,PTFE,
Ball Valve (FB) 1/2 1 1/2 150# Note 1
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011440XG
Service DC, DH, DN, VA, FA, PG, FL Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BF112HLN
Body:A216 Gr. WCB, Ball: 13%Cr,
2 4 150# Note 1
PTFE, Floating Ball, API 6D, Lever
Operated,
BF112HGN
Body:A216 Gr. WCB, Ball: 13%Cr,
6 8 150# Note 1
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BF112SGN
Body:A216 Gr. WCB, Ball: CS +
10 24 150# 3mm 13%Cr Weld Overlay, PTFE, Note 1
Trunnion Mounted, API 6D, Gear
Operated,
BR111HLN
Body:A105N, Ball: 13%Cr, PTFE,
1/2 1 1/2 150#
Floating Ball, ISO 17292, Lever
Operated,
BR112HLN
Body:A216 Gr. WCB, Ball: 13%Cr,
2 4 150#
PTFE, Floating Ball, API 6D, Lever
Operated,
Flanged RF
Ball Valve (RB) BR112HGN
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: 13%Cr,
6 8 150#
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR112SGN
Body:A216 Gr. WCB, Ball: CS +
10 24 150# 3mm 13%Cr Weld Overlay, PTFE,
Trunnion Mounted, API 6D, Gear
Operated,
GA111FHN
Body:A105N, Wedge: 13%Cr +
1/2 1 1/2 150#
Stellite 6, API 602, Handwheel
Flanged RF Operated,
Gate Valve
/ 3.2-6.3 m GA112FHN
Body:A216 Gr. WCB, Wedge:
2 8 150#
13%Cr + Stellite 6, API 600,
Handwheel Operated,
GA112GHN
Body:A216 Gr. WCB, Wedge: CS +
10 12 150#
3mm 13%Cr Weld Overlay, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA112GGN
Body:A216 Gr. WCB, Wedge: CS +
14 24 150#
3mm 13%Cr Weld Overlay, API 600,
Gear Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011440XG
Service DC, DH, DN, VA, FA, PG, FL Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
GL111FHN
1/2 1 1/2 150# Body:A105N, Disc: 13%Cr + Stellite
6, ISO 15761, Handwheel Operated,
Flanged RF
Globe Valve GL112FHN
/ 3.2-6.3 m
Body:A216 Gr. WCB, Disc: 13%Cr +
2 8 150#
Stellite 6, BS 1873, Handwheel
Operated,
NE111FHN
Flanged RF
Needle Valve 1/2 1 1/2 150# Body:A105N, Disc: 13%Cr + Stellite Note 5
/ 3.2-6.3 m
6, ISO 15761, Handwheel Operated,
CP111FAN
Flanged RF
1/2 1 1/2 150# Piston Lift Type, Body:A105N, Disc:
/ 3.2-6.3 m
13%Cr + Stellite 6, ISO 15761,
CW192FAN
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 150#
3.2-6.3 m A216 Gr. WCB, Disc: 13%Cr +
Check Valve
Stellite 6, API 594 Type A,
CW192GAN
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 24 150# A216 Gr. WCB, Disc: CS + 3mm
3.2-6.3 m
13%Cr Weld Overlay, API 594 Type
A,
Flanged RF DB171HLN
Double Block and
1/2 2 150# (3.2-6.3 m) Body:A105N, Ball: 13%Cr, PTFE, Note 6
Bleed Valve
x NPT(F) Floating Ball, Lever Operated,
Notes:
1) Use only when indicated on P&IDs.
2) Use for connection with Class 300 rating flanges / nozzles etc.
3) See branch connection (Appendix-D) for branch connection type.
4) All material shall be suitable for use in sour environment and shall be certified to NACE MR 0175 / ISO 15156
Latest Edition.
5) Use for sample connection.
6) Use for interface with instruments.
7) Use for connection with Class 600 rating flanges / nozzles etc.
8) Use for connection with Class 1500 rating flanges / nozzles etc.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011441XG
Service DC, DH, DN, VA, FA, PG Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 011441XG
Service DC, DH, DN, VA, FA, PG Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
RF /
Blind Flange 1/2 24 300# ASTM A105N, ASME B16.5 Note 2
3.2-6.3 m
600# /
Thickness RF /
WN Flange 1/2 2 ASTM A105N, ASME B16.5 Note 7
Same As 3.2-6.3 m
Pipe
1500# /
Thickness RF /
WN Flange 1/2 4 ASTM A105N, ASME B16.5 Note 8
Same As 3.2-6.3 m
Pipe
300# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 14 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 16 24 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 150# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 300# - Note 2
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 2 600# - Note 7
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 4 1500# - Note 8
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1/2 24 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF111DLN
Body:A105N, Ball: Inconel
1/2 1 1/2 150# Note 1
625,PTFE, Floating Ball, ISO
Flanged RF 17292, Lever Operated,
Ball Valve (FB)
/ 3.2-6.3 m BF112DLN
Body:A216 Gr. WCB, Ball: Inconel
2 4 150# Note 1
625, PTFE, Floating Ball, API 6D,
Lever Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011441XG
Service DC, DH, DN, VA, FA, PG Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BF112DGN
Body:A216 Gr. WCB, Ball: Inconel
6 8 150# Note 1
625, PTFE, Trunnion Mounted, API
6D, Gear Operated,
BF112VGN
Body:A216 Gr. WCB, Ball: CS +
10 24 150# 3mm Inconel 625 Weld Overlay, Note 1
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR111DLN
Body:A105N, Ball: Inconel 625,
1/2 1 1/2 150#
PTFE, Floating Ball, ISO 17292,
Lever Operated,
BR112DLN
Body:A216 Gr. WCB, Ball: Inconel
2 4 150#
625, PTFE, Floating Ball, API 6D,
Lever Operated,
Flanged RF
Ball Valve (RB) BR112DGN
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: Inconel
6 8 150#
625, PTFE, Trunnion Mounted, API
6D, Gear Operated,
BR112VGN
Body:A216 Gr. WCB, Ball: CS +
10 24 150# 3mm Inconel 625 Weld Overlay,
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
GA111AHN
Body:A105N, Wedge: Inconel 625 +
1/2 1 1/2 150#
Stellite 6, API 602, Handwheel
Flanged RF Operated,
Gate Valve
/ 3.2-6.3 m GA112AHN
Body:A216 Gr. WCB, Wedge:
2 8 150#
Inconel 625 + Stellite 6, API 600,
Handwheel Operated,
GA112EHN
Body:A216 Gr. WCB, Wedge: CS +
10 12 150#
3mm Inconel 625 Weld Overlay,
Flanged RF API 600, Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA112EGN
Body:A216 Gr. WCB, Wedge: CS +
14 24 150#
3mm Inconel 625 Weld Overlay,
API 600, Gear Operated,
GL111AHN
Flanged RF Body:A105N, Disc: Inconel 625 +
Globe Valve 1/2 1 1/2 150#
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 011441XG
Service DC, DH, DN, VA, FA, PG Corrosion Allowance 3 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
GL112AHN
Body:A216 Gr. WCB, Disc: Inconel
2 8 150#
625 + Stellite 6, BS 1873,
Handwheel Operated,
NE111AHN
Flanged RF Body:A105N, Disc: Inconel 625 +
Needle Valve 1/2 1 1/2 150# Note 5
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
CP111AAN
Flanged RF
1/2 1 1/2 150# Piston Lift Type, Body:A105N, Disc:
/ 3.2-6.3 m
Inconel 625 + Stellite 6, ISO 15761,
CW192AAN
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 150#
3.2-6.3 m A216 Gr. WCB, Disc: Inconel 625 +
Check Valve
Stellite 6, API 594 Type A,
CW192EAN
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 24 150# A216 Gr. WCB, Disc: CS + 3mm
3.2-6.3 m
Inconel 625 Weld Overlay, API 594
Type A,
DB171DLN
Flanged RF
Double Block and Body:A105N, Ball: Inconel 625,
1/2 2 150# (3.2-6.3 m) Note 6
Bleed Valve PTFE, Floating Ball, Lever
x NPT(F)
Operated,
Notes:
011440YG
<Class
Service DC, DH, DN, PW Corrosion Allowance 6 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
011440YG
<Class
Service DC, DH, DN, PW Corrosion Allowance 6 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
600# /
Thickness RF /
WN Flange 1/2 24 ASTM A105N, ASME B16.5 Note 9
Same As 3.2-6.3 m
Pipe
1500# /
Thickness RF /
WN Flange 1/2 24 ASTM A105N, ASME B16.5 Note 8
Same As 3.2-6.3 m
Pipe
RF /
Blind Flange 1/2 24 300# ASTM A105N, ASME B16.5 Note 2
3.2-6.3 m
300# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 14 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 16 24 150# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 150# - Ring / CS Centering Ring, ASME
B16.20
Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 300# - Note 2
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 600# - Note 9
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 1500# - Note 8
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1/2 24 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF111MLNX
Flanged RF Body:A105N, Ball: Monel, PTFE,
Ball Valve (FB) 1/2 1 1/2 150# Note 1,5
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
011440YG
<Class
Service DC, DH, DN, PW Corrosion Allowance 6 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BF112MLNX
Body:A216 Gr. WCB, Ball: Monel,
2 4 150# Note 1,5
PTFE, Floating Ball, API 6D, Lever
Operated,
BF112MGNX
Body:A216 Gr. WCB, Ball: Monel,
6 8 150# Note 1,5
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BF112RGNX
Body:A216 Gr. WCB, Ball: CS +
10 24 150# 3mm Monel Weld Overlay, PTFE, Note 1,5
Trunnion Mounted, API 6D, Gear
Operated,
BR111MLNX
Body:A105N, Ball: Monel, PTFE,
1/2 1 1/2 150# Note 5
Floating Ball, ISO 17292, Lever
Operated,
BR112MLNX
Body:A216 Gr. WCB, Ball: Monel,
2 4 150# Note 5
PTFE, Floating Ball, API 6D, Lever
Operated,
Flanged RF
Ball Valve (RB) BR112MGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: Monel,
6 8 150# Note 5
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR112RGNX
Body:A216 Gr. WCB, Ball: CS +
10 24 150# 3mm Monel Weld Overlay, PTFE, Note 5
Trunnion Mounted, API 6D, Gear
Operated
GA111KHNX
Body:A105N, Wedge: Monel +
1/2 1 1/2 150# Note 5
Stellite 6, API 602, Handwheel
Flanged RF Operated,
Gate Valve
/ 3.2-6.3 m GA112KHNX
Body:A216 Gr. WCB, Wedge:
2 8 150# Note 5
Monel + Stellite 6, API 600,
Handwheel Operated,
GA112LHNX
Body:A216 Gr. WCB, Wedge: CS +
10 12 150# Note 5
3mm Monel Weld Overlay, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA112LGNX
Body:A216 Gr. WCB, Wedge: CS +
14 24 150# Note 5
3mm Monel Weld Overlay, API 600,
Gear Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
011440YG
<Class
Service DC, DH, DN, PW Corrosion Allowance 6 mm
Rating/Facing 150 # / RF Material C.S. NACE (Note 4)
Temperature ºC -29 38 50 100 150
Pressure Bar g 19.6 19.6 19.2 17.7 15.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
GL111KHNX
Body:A105N, Disc: Monel + Stellite
1/2 1 1/2 150# Note 5
6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL112KHNX
Body:A216 Gr. WCB, Disc: Monel +
2 8 150# Note 5
Stellite 6, BS 1873, Handwheel
Operated,
NE111KHNX
Flanged RF Body:A105N, Disc: Monel + Stellite
Needle Valve 1/2 1 1/2 150# Note 5,6
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
CP111KANX
Flanged RF
1/2 1 1/2 150# Piston Lift Type, Body:A105N, Disc: Note 5
/ 3.2-6.3 m
Monel + + Stellite 6, ISO 15761,
CW192KANX
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 150# Note 5
Check Valve 3.2-6.3 m A216 Gr. WCB, Disc: Monel +
Stellite 6, API 594 Type A,
CW192LANX
Wafer Lug / Dual Plate Wafer Lug Type, Body:
10 24 150# Note 5
3.2-6.3 m A216 Gr. WCB, Disc: CS + Monel
Weld Overlay, API 594 Type A,
Flanged RF DB171MLNX
Double Block and
1/2 2 150# (3.2-6.3 m) Body:A105N, Ball: Monel, PTFE, Note 5,7
Bleed Valve
x NPT(F) Floating Ball, Lever Operated,
Notes:
1) Use only when indicated on P&IDs.
2) Use for connection with Class 300 rating flanges / nozzles etc.
3) See branch connection (Appendix-D) for branch connection type.
4) All material shall be suitable for use in sour environment and shall be certified to NACE MR 0175 / ISO 15156
Latest Edition.
5) C.A. = 6mm shall be considered in thickness calculation for carbon steel parts in contact with fluid.
6) Use for sample connection.
7) Use for interface with instruments.
8) Use for connection with Class 1500 rating flanges / nozzles etc.
9) Use for connection with Class 600 rating flanges / nozzles etc.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 013411XG
Service CI, WM Corrosion Allowance 0 mm
Rating/Facing 150 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -50 38 50 100 150
Pressure Bar g 19.0 19.0 18.4 16.2 14.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
ASTM A312 TP316/316L,
1/2 3/4 Sch.40S BE
Seamless, ASME B36.19M
Pipe
ASTM A358 Gr. 316 / 316L,
1 8 Sch.10S BE
Welded, ASME B36.19M
Thickness
ASTM A403 WP316/316L-S,
Cap 1/2 8 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S, L.R.,
45 Elbow 1/2 8 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S, L.R.,
90 Elbow 1/2 8 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S,
Tee Equal 1/2 8 Same As BW
ASME B16.9
Pipe
3/4 1/2 Thickness
ASTM A403 WP316/316L-S,
Tee Reducing X X Same As BW
ASME B16.9
8 6 Pipe
3/4 1/2 Thickness
Reducer ASTM A403 WP316/316L-S,
X X Same As BW
Concentric ASME B16.9
8 6 Pipe
3/4 1/2 Thickness
Reducer ASTM A403 WP316/316L-S,
X X Same As BW
Eccentric ASME B16.9
8 6 Pipe
1/2 3/4 Sch.40S ASTM A312 TP 316/316L,
Nipple BBE Seamless, ASME B36.19M,
1 1 1/2 Sch.10S L=100mm
Thickness
ASTM A182 F316/316L,
Weldolet 1/2 3 Same As BW Note 3
MSS SP 97
Pipe
150# /
ASTM A182 F316/316L,
Thickness RF /
Flangeolet 1/2 2 MFG. STD., Flanged end as per Note 3
Same As 3.2-6.3 m
ASME B16.5
Pipe
150# /
Thickness RF / ASTM A182 F316/316L,
WN Flange 1/2 8
Same As 3.2-6.3 m ASME B16.5
Pipe
RF / ASTM A182 F316, ASME B16.5
Blind Flange 1/2 8 150#
3.2-6.3 m
300# /
Thickness RF / ASTM A182 F316/316L,
WN Flange 1/2 8 Note 2
Same As 3.2-6.3 m ASME B16.5
Pipe
RF / ASTM A182 F316, ASME B16.5
Blind Flange 1/2 8 300# Note 2
3.2-6.3 m
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 013411XG
Service CI, WM Corrosion Allowance 0 mm
Rating/Facing 150 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -50 38 50 100 150
Pressure Bar g 19.0 19.0 18.4 16.2 14.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
300# /
Thickness RF / ASTM A182 F316/316L,
Orifice Flange 1 8
Same As 3.2-6.3 m ASME B16.36
Pipe
RF / ASTM A240-316, ASME B16.48
Spectacle Blind 1/2 8 150#
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 8 150# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 8 300# - Note 2
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Class 013411XG
Service CI, WM Corrosion Allowance 0 mm
Rating/Facing 150 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -50 38 50 100 150
Pressure Bar g 19.0 19.0 18.4 16.2 14.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
GA1164H
Body:A351 CF8M, Wedge:SS316 +
2 8 150#
Stellite 6, API 600, Handwheel
Operated,
GL1154H
Body:A182 F316/316L, Disc:SS316
1/2 1 1/2 150#
+ Stellite 6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL1164H
Body:A351 CF8M, Disc:SS316 +
2 8 150#
Stellite 6, BS 1873, Handwheel
Operated,
NE1154H
Flanged RF Body:A182 F316/316L, Disc:SS316
Needle Valve 1/2 1 1/2 150# Note 4
/ 3.2-6.3 m + Stellite 6, ISO 15761, Handwheel
Operated,
CP1154A
Flanged RF Piston Lift Type, Body:A182
1/2 1 1/2 150#
/ 3.2-6.3 m F316/316L, Disc:SS316 + Stellite 6,
ISO 15761,
Check Valve
CW1964A
Wafer Lug / Dual Plate Wafer Lug Type,
2 8 150#
3.2-6.3 m Body:A351 CF8M, Disc:SS316 +
Stellite 6, API 594 Type A,
DB1756L
Flanged RF
Double Block and Body:A182 F316/316L, Ball: SS316,
1/2 2 150# (3.2-6.3 m) Note 5
Bleed Valve Filled PTFE, Floating Ball, Lever
x NPT(F)
Operated,
Notes:
Class 018011XG
Service AI, WP Corrosion Allowance 0 mm
C.S. Galvanized
Rating/Facing 150 # / RF Material
(Note 1)
Temperature ºC 0 90
Pressure Bar g 16.0 16.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
ASTM A106 Gr. B, Galvanized,
1/2 2 Sch.80 NPT(M)
Seamless, ASME B36.10M
Pipe
ASTM A106 Gr. B, Seamless,
3 6 Sch.40 BE
ASME B36.10M
ASTM A105, Galvanized, ASME
1/2 2 3000# NPT(F)
B16.11
Cap Thickness
ASTM A234 Gr. WPB, Seamless,
3 6 Same As BW
ASME B16.9
Pipe
ASTM A105, Galvanized, ASME
1/2 2 3000# NPT(F)
B16.11
45 Elbow Thickness
ASTM A234 Gr. WPB, Seamless,
3 6 Same As BW
ASME B16.9
Pipe
ASTM A105, Galvanized, ASME
1/2 2 3000# NPT(F)
B16.11
90 Elbow Thickness
ASTM A234 Gr. WPB, Seamless,
3 6 Same As BW
ASME B16.9
Pipe
ASTM A105, Galvanized, ASME
1/2 2 3000# NPT(F)
B16.11
Tee Equal Thickness
ASTM A234 Gr. WPB, Seamless,
3 6 Same As BW
ASME B16.9
Pipe
3/4 1/2
ASTM A105, Galvanized, ASME
x x 3000# NPT(F)
B16.11
2 1 1/2
Tee Reducing
3 1 1/2 Thickness
ASTM A234 Gr. WPB, Seamless,
x x Same As BW
ASME B16.9
6 4 Pipe
3/4 1/2
Reducing ASTM A105, Galvanized, ASME
x x 3000# NPT(F)
Coupling B16.11
2 1 1/2
Bevel Large
3 1 1/2 Thickness
Concentric End x ASTM A234 Gr. WPB, Seamless,
x X Same As
Swage Nipple NPTM MSS SP 95
4 2 Pipe
Small End
Bevel Large
3 1 1/2 Thickness
Eccentric Swage End x ASTM A234 Gr. WPB, Seamless,
x X Same As
Nipple NPTM MSS SP 95
4 2 Pipe
Small End
4 3 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
x x Same As BW
Concentric ASME B16.9
6 4 Pipe
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 018011XG
Service AI, WP Corrosion Allowance 0 mm
C.S. Galvanized
Rating/Facing 150 # / RF Material
(Note 1)
Temperature ºC 0 90
Pressure Bar g 16.0 16.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
4 3 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
x x Same As BW
Eccentric ASME B16.9
6 4 Pipe
Class 018011XG
Service AI, WP Corrosion Allowance 0 mm
C.S. Galvanized
Rating/Facing 150 # / RF Material
(Note 1)
Temperature ºC 0 90
Pressure Bar g 16.0 16.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CP459CA
Piston Lift Type, Body: B148 UNS
Check Valve 1/2 2 800# NPT(F)
C95400, Disc: Aluminium Bronze,
BS 5154 Sr.A,
CW199CA
Wafer Lug / Dual Plate Wafer Lug Type, Body:
Check Valve 3 6 150#
3.2-6.3 m B148 UNS C95400, Disc:
Aluminuim Bronze, API 594 Type A,
Notes:
Class 031440XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 031440XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
RF /
Blind Flange 1/2 24 300# ASTM A105N, ASME B16.5
3.2-6.3 m
300# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 12 300# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 14 24 300# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 300# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 600# - Note 7
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 1500# - Note 8
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1/2 24 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF211HLNX
Body:A105N, Ball: 13%Cr, PTFE,
1/2 1 1/2 300# Note 1,4
Floating Ball, ISO 17292, Lever
Operated,
BF212HLNX
Flanged RF Body:A216 Gr. WCB, Ball: 13%Cr,
Ball Valve (FB) 2 4 300# Note 1,4
/ 3.2-6.3 m PTFE, Floating Ball, API 6D, Lever
Operated,
BF212HGNX
Body:A216 Gr. WCB, Ball: 13%Cr,
6 8 300# Note 1,4
PTFE, Trunnion Mounted, API 6D,
Gear Operated,
BF212SGNX
Body:A216 Gr. WCB, Ball: CS +
Flanged RF
Ball Valve (FB) 10 24 300# 3mm 13%Cr Weld Overlay, RPTFE, Note 1,4
/ 3.2-6.3 m
Trunnion Mounted, API 6D, Gear
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 031440XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR211HLNX
Body:A105N, Ball: 13%Cr, RPTFE,
1/2 1 1/2 300# Note 4
Floating Ball, ISO 17292, Lever
Operated,
BR212HLNX
Body:A216 Gr. WCB, Ball: 13%Cr,
2 4 300# Note 4
RPTFE, Floating Ball, API 6D,
Lever Operated,
Flanged RF
Ball Valve (RB) BR212HGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: 13%Cr,
6 8 300# Note 4
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR212SGNX
Body:A216 Gr. WCB, Ball: CS +
10 24 300# 3mm 13%Cr Weld Overlay, RPTFE, Note 4
Trunnion Mounted, API 6D, Gear
Operated,
GA211FHNX
Body:A105N, Wedge: 13%Cr +
1/2 1 1/2 300# Note 4
Stellite 6, API 602, Handwheel
Operated,
GA212FHNX
Flanged RF Body:A216 Gr. WCB, Wedge:
Gate Valve 2 8 300# Note 4
/ 3.2-6.3 m 13%Cr + Stellite 6, API 600,
Handwheel Operated,
GA212GGNX
Body:A216 Gr. WCB, Wedge: CS +
10 24 300# Note 4
3mm 13%Cr Weld Overlay, API
600, Gear Operated,
GL211FHNX
Body:A105N, Disc: 13%Cr + Stellite
1/2 1 1/2 300# Note 4
6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL212FHNX
Body:A216 Gr. WCB, Disc: 13%Cr
2 8 300# Note 4
+ Stellite 6, BS 1873, Handwheel
Operated,
NE211FHNX
Flanged RF Body:A105N, Disc: 13%Cr + Stellite
Needle Valve 1/2 1 1/2 300# Note 4,5
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
CP211FANX
Flanged RF
Check Valve 1/2 1 1/2 300# Piston Lift Type, Body:A105N, Disc: Note 4
/ 3.2-6.3 m
13%Cr + Stellite 6, ISO 15761,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 031440XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CW292FANX
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 300# Note 4
3.2-6.3 m A216 Gr. WCB, Disc: 13%Cr +
Stellite 6, API 594 Type A,
CW292GANX
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 24 300# A216 Gr. WCB, Disc: CS + 3mm Note 4
3.2-6.3 m
13%Cr Weld Overlay, API 594 Type
A,
CS212FANX
Swing Check Type, Body: A216 Gr.
2 8 300# Note 1,4
WCB, Disc: 13%Cr + Stellite 6, API
Flanged RF 594 Type B,
/ 3.2-6.3 m CS212GANX
Swing Check Type, Body: A216 Gr.
10 24 300# Note 1,4
WCB, Disc: CS + 3mm 13%Cr
Weld Overlay, API 594 Type B,
Flanged RF DB271HLNX
Double Block and
1/2 2 300# (3.2-6.3 m) Body:A105N, Ball: 13%Cr, RPTFE, Note 4,6
Bleed Valve
x NPT(F) Floating Ball, Lever Operated,
Notes:
Class 031441XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 031441XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
RF /
Blind Flange 1/2 24 300# ASTM A105N, ASME B16.5
3.2-6.3 m
300# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 12 300# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 14 24 300# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 300# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 600# - Note 7
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 1500# - Note 8
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1/2 24 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF211DLNX
Body:A105N, Ball: Inconel 625,
1/2 1 1/2 300# Note 1,4
RPTFE, Floating Ball, ISO 17292,
Lever Operated,
BF212DLNX
Flanged RF Body:A216 Gr. WCB, Ball: Inconel
Ball Valve (FB) 2 4 300# Note 1,4
/ 3.2-6.3 m 625, RPTFE, Floating Ball, API 6D,
Lever Operated,
BF212DGNX
Body:A216 Gr. WCB, Ball: Inconel
6 8 300# Note 1,4
625, RPTFE, Trunnion Mounted,
API 6D, Gear Operated,
BF212VGNX
Body:A216 Gr. WCB, Ball: CS +
Flanged RF
Ball Valve (FB) 10 24 300# 3mm Inconel 625 Weld Overlay, Note 1,4
/ 3.2-6.3 m
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 031441XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR211DLNX
Body:A105N, Ball: Inconel 625,
1/2 1 1/2 300# Note 4
RPTFE, Floating Ball, ISO 17292,
Lever Operated,
BR212DLNX
Body:A216 Gr. WCB, Ball: Inconel
2 4 300# Note 4
625, RPTFE, Floating Ball, API 6D,
Lever Operated,
Flanged RF
Ball Valve (RB) BR212DGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: Inconel
6 8 300# Note 4
625, RPTFE, Trunnion Mounted,
API 6D, Gear Operated,
BR212VGNX
Body:A216 Gr. WCB, Ball: CS +
10 24 300# 3mm Inconel 625 Weld Overlay, Note 4
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
GA211AHNX
Body:A105N, Wedge: Inconel 625 +
1/2 1 1/2 300# Note 4
Stellite 6, API 602, Handwheel
Operated,
GA212AHNX
Flanged RF Body:A216 Gr. WCB, Wedge:
Gate Valve 2 8 300# Note 4
/ 3.2-6.3 m Inconel 625 + Stellite 6, API 600,
Handwheel Operated,
GA212EGNX
Body:A216 Gr. WCB, Wedge: CS +
10 24 300# Note 4
3mm Inconel 625 Weld Overlay,
API 600, Gear Operated,
GL211AHNX
Body:A105N, Disc: Inconel 625 +
1/2 1 1/2 300# Note 4
Stellite 6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL212AHNX
Body:A216 Gr. WCB, Disc: Inconel
2 8 300# Note 4
625 + Stellite 6, BS 1873,
Handwheel Operated,
NE211AHNX
Flanged RF Body:A105N, Disc: Inconel 625 +
Needle Valve 1/2 1 1/2 300# Note 4,5
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
CP211AANX
Flanged RF
Check Valve 1/2 1 1/2 300# Piston Lift Type, Body:A105N, Disc: Note 4
/ 3.2-6.3 m
Inconel 625 + Stellite 6, ISO 15761,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 031441XG
Service FS, PG, PW Corrosion Allowance 6 mm
Rating/Facing 300 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 51.1 51.1 50.1 46.6 45.1
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CW292AANX
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 300# Note 4
3.2-6.3 m A216 Gr. WCB, Disc: Inconel 625 +
Stellite 6, API 594 Type A,
CW292EANX
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 24 300# A216 Gr. WCB, Disc: CS + 3mm Note 4
3.2-6.3 m
Inconel 625 Weld Overlay, API 594
Type A,
CS212AANX
Swing Check Type, Body: A216 Gr.
2 8 300# Note 1,4
WCB, Disc: Inconel 625 + Stellite 6,
Flanged RF API 594 Type B,
/ 3.2-6.3 m CS212EANX
Swing Check Type, Body: A216 Gr.
10 24 300# Note 1,4
WCB, Disc: CS + 3mm Inconel 625
Weld Overlay, API 594 Type B,
DB271DLNX
Flanged RF
Double Block and Body:A105N, Ball: Inconel 625,
1/2 2 300# (3.2-6.3 m) Note 4,6
Bleed Valve RPTFE, Floating Ball, Lever
x NPT(F)
Operated,
Notes:
Class 033411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 300 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC 83
Pressure Bar g 20
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 033411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 300 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC 83
Pressure Bar g 20
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 3 300# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A320 Gr. L7
Stud Bolt / Nut 1/2 3 All -
/ A194 Gr. 7, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF2156L
Body:A182 F316/316L, Ball: SS316,
1/2 1 1/2 300# Note 1
Filled RPTFE, Floating Ball, ISO
Flanged RF 17292, Lever Operated,
Ball Valve (FB)
/ 3.2-6.3 m BF2166L
Body:A351 CF8M, Ball: SS316,
2 3 300# Note 1
Filled RPTFE, Floating Ball, API 6D,
Lever Operated,
BR2156L
Flanged RF Body:A182 F316/316L, Ball: SS316,
1/2 1 1/2 300#
/ 3.2-6.3 m Filled RPTFE, Floating Ball, ISO
17292, Lever Op,
Ball Valve (RB)
BR2166L
Flanged RF Body:A351 CF8M, Ball: SS316,
2 3 300#
/ 3.2-6.3 m Filled RPTFE, Floating Ball, API 6D,
Lever Operated,
GA2154H
Body:A182 F316/316L,
1/2 1 1/2 300#
Wedge:SS316 + Stellite 6, API 602,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA2164H
Body:A351 CF8M, Wedge:SS316 +
2 3 300#
Stellite 6, API 600, Handwheel
Operated,
GL2154H
Body:A182 F316/316L, Disc:SS316
1/2 1 1/2 300#
+ Stellite 6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL2164H
Body:A351 CF8M, Disc:SS316 +
2 3 300#
Stellite 6, BS 1873, Handwheel
Operated,
NE2154H
Flanged RF Body:A182 F316/316L, Disc:SS316
Needle Valve 1/2 1 1/2 300# Note 3
/ 3.2-6.3 m + Stellite 6, ISO 15761, Handwheel
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 033411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 300 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC 83
Pressure Bar g 20
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CP2154A
Flanged RF Piston Lift Type, Body:A182
1/2 1 1/2 300#
/ 3.2-6.3 m F316/316L, Disc:SS316 + Stellite 6,
ISO 15761,
Check Valve
CW2964A
Wafer Lug / Dual Plate Wafer Lug Type,
2 3 300#
3.2-6.3 m Body:A351 CF8M, Disc:SS316 +
Stellite 6, API 594 Type A,
DB2756L
Flanged RF
Double Block and Body:A182 F316/316L, Ball: SS316,
1/2 2 300# (3.2-6.3 m) Note 4
Bleed Valve Filled RPTFE, Floating Ball, Lever
x NPT(F)
Operated,
Notes:
Class 061440XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 061440XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
RF /
Spectacle Blind 1/2 6 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 24 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 600# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 6 10 1500# - Note 6
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1/2 24 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF311HLN
Body:A105N, Ball: 13%Cr, RPTFE,
1/2 1 1/2 600# Note 1
Floating Ball, ISO 17292, Lever
Operated,
BF312HLN
Body:A216 Gr. WCB, Ball: 13%Cr,
2 4 600# Note 1
RPTFE, Trunnion Mounted, API 6D,
Lever Operated,
Flanged RF
Ball Valve (FB) BF312HGN
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: 13%Cr,
6 8 600# Note 1
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
BF312SGN
Body:A216 Gr. WCB, Ball: CS +
10 24 600# 3mm 13%Cr Weld Overlay, RPTFE, Note 1
Trunnion Mounted, API 6D, Gear
Operated,
BR311HLN
Flanged RF Body:A105N, Ball: 13%Cr, RPTFE,
Ball Valve (RB) 1/2 1 1/2 600#
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
BR312HLN
Body:A216 Gr. WCB, Ball: 13%Cr,
2 4 600#
RPTFE, Trunnion Mounted, API 6D,
Flanged RF Lever Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR312HGN
Body:A216 Gr. WCB, Ball: 13%Cr,
6 8 600#
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061440XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR312SGN
Body:A216 Gr. WCB, Ball: CS +
10 24 600# 3mm 13%Cr Weld Overlay, RPTFE,
Trunnion Mounted, API 6D, Gear
Operated,
GA311FHN
Body:A105N, Wedge: 13%Cr +
1/2 1 1/2 600#
Stellite 6, API 602, Handwheel
Operated,
GA312FHN
Body:A216 Gr. WCB, Wedge:
2 4 600#
13%Cr + Stellite 6, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA312FGN
Body:A216 Gr. WCB, Wedge:
6 8 600#
13%Cr + Stellite 6, API 600, Gear
Operated,
GA312GGN
Body:A216 Gr. WCB, Wedge: CS +
10 24 600#
3mm 13%Cr Weld Overlay, API
600, Gear Operated,
GL311FHN
Body:A105N, Disc: 13%Cr + Stellite
1/2 1 1/2 600#
6, ISO 15761, Handwheel
Operated,
GL312FHN
Flanged RF Body:A216 Gr. WCB, Disc: 13%Cr
Globe Valve 2 4 600#
/ 3.2-6.3 m + Stellite 6, BS 1873, Handwheel
Operated,
GL312FGN
Body:A216 Gr. WCB, Disc: 13%Cr
6 8 600#
+ Stellite 6, BS 1873, Gear
Operated,
NE311FHN
Flanged RF Body:A105N, Disc: 13%Cr + Stellite
Needle Valve 1/2 1 1/2 600# Note 4
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
CP311FAN
Flanged RF
1/2 1 1/2 600# Piston Lift Type, Body:A105N, Disc:
/ 3.2-6.3 m
13%Cr + Stellite 6, ISO 15761,
Check Valve CW392FAN
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 600#
3.2-6.3 m A216 Gr. WCB, Disc: 13%Cr +
Stellite 6, API 594 Type A,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061440XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CW392GAN
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 24 600# A216 Gr. WCB, Disc: CS + 3mm
3.2-6.3 m
13%Cr Weld Overlay, API 594 Type
A,
CS312FAN
Flanged RF Swing Check Type, Body: A216 Gr.
2 8 600# Note 1
/ 3.2-6.3 m WCB, Disc: 13%Cr + Stellite 6, API
594 Type B,
CS312GAN
Flanged RF Swing Check Type, Body: A216 Gr.
10 24 600# Note 1
/ 3.2-6.3 m WCB, Disc: CS + 3mm 13%Cr
Weld Overlay, API 594 Type B,
Flanged RF DB371HLN
Double Block and
1/2 2 600# (3.2-6.3 m) Body:A105N, Ball: 13%Cr, RPTFE, Note 5
Bleed Valve
x NPT(F) Floating Ball, Lever Operated,
Notes:
Class 061441XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 061441XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
RF /
Spectacle Blind 1/2 6 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 24 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1/2 24 600# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 6 10 1500# - Note 6
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1/2 24 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF311DLN
Body:A105N, Ball: Inconel 625,
1/2 1 1/2 600# Note 1
RPTFE, Floating Ball, ISO 17292,
Lever Operated,
BF312DLN
Body:A216 Gr. WCB, Ball: Inconel
2 4 600# Note 1
625, RPTFE, Trunnion Mounted,
API 6D, Lever Operated,
Flanged RF
Ball Valve (FB) BF312DGN
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: Inconel
6 8 600# Note 1
625, RPTFE, Trunnion Mounted,
API 6D, Gear Operated,
BF312VGN
Body:A216 Gr. WCB, Ball: CS +
10 24 600# 3mm Inconel 625 Weld Overlay, Note 1
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR311DLN
Flanged RF Body:A105N, Ball: Inconel 625,
Ball Valve (RB) 1/2 1 1/2 600#
/ 3.2-6.3 m RPTFE, Floating Ball, ISO 17292,
Lever Operated,
BR312DLN
Body:A216 Gr. WCB, Ball: Inconel
2 4 600#
625, RPTFE, Trunnion Mounted,
Flanged RF API 6D, Lever Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR312DGN
Body:A216 Gr. WCB, Ball: Inconel
6 8 600#
625, RPTFE, Trunnion Mounted,
API 6D, Gear Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061441XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR312VGN
Body:A216 Gr. WCB, Ball: CS +
10 24 600# 3mm Inconel 625 Weld Overlay,
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
GA311AHN
Body:A105N, Wedge: Inconel 625 +
1/2 1 1/2 600#
Stellite 6, API 602, Handwheel
Operated,
GA312AHN
Body:A216 Gr. WCB, Wedge:
2 4 600#
Inconel 625 + Stellite 6, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA312AGN
Body:A216 Gr. WCB, Wedge:
6 8 600#
Inconel 625 + Stellite 6, API 600,
Gear Operated,
GA312EGN
Body:A216 Gr. WCB, Wedge: CS +
10 24 600#
3mm Inconel 625 Weld Overlay,
API 600, Gear Operated,
GL311AHN
Body:A105N, Disc: Inconel 625 +
1/2 1 1/2 600#
Stellite 6, ISO 15761, Handwheel
Operated,
GL312AHN
Flanged RF Body:A216 Gr. WCB, Disc: Inconel
Globe Valve 2 4 600#
/ 3.2-6.3 m 625 + Stellite 6, BS 1873,
Handwheel Operated,
GL312AGN
Body:A216 Gr. WCB, Disc: Inconel
6 8 600#
625 + Stellite 6, BS 1873, Gear
Operated,
NE311AHN
Flanged RF Body:A105N, Disc: Inconel 625 +
Needle Valve 1/2 1 1/2 600# Note 4
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
CP311AAN
Flanged RF
1/2 1 1/2 600# Piston Lift Type, Body:A105N, Disc:
/ 3.2-6.3 m
Inconel 625 + Stellite 6, ISO 15761,
Check Valve CW392AAN
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 600#
3.2-6.3 m A216 Gr. WCB, Disc: Inconel 625 +
Stellite 6, API 594 Type A,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061441XG
Service FS Corrosion Allowance 3 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CW392EAN
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
10 24 600# A216 Gr. WCB, Disc: CS + 3mm
3.2-6.3 m
Inconel 625 Weld Overlay, API 594
Type A,
CS312AAN
Flanged RF Swing Check Type, Body: A216 Gr.
2 8 600# Note 1
/ 3.2-6.3 m WCB, Disc: Inconel 625 + Stellite 6,
API 594 Type B,
CS312EAN
Flanged RF Swing Check Type, Body: A216 Gr.
10 24 600# Note 1
/ 3.2-6.3 m WCB, Disc: CS + 3mm Inconel 625
Weld Overlay, API 594 Type B,
DB371DLN
Flanged RF
Double Block and Body:A105N, Ball: Inconel 625,
1/2 2 600# (3.2-6.3 m) Note 5
Bleed Valve RPTFE, Floating Ball, Lever
x NPT(F)
Operated,
Notes:
Class 061440YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1 2 Sch.XXS
3 4 Sch.160 ASTM A106 Gr. B, Seamless, ASME
BE
6 8 Sch.120 B36.10M
Pipe 10 24 Sch.100
Thickness
ASTM A234 Gr. WPB, Seamless,
Cap 1 24 Same As BW
ASME B16.9
Pipe
ASTM A234 Gr. WPB, Seamless,
1 24 Thickness
L.R., ASME B16.9
45 Elbow Same As BW
ASTM A234 Gr. WPB, Welded, L.R.,
28 28 Pipe
ASME B16.9
ASTM A234 Gr. WPB, Seamless,
1 24 Thickness
L.R., ASME B16.9
90 Elbow Same As BW
ASTM A234 Gr. WPB, Welded, L.R.,
28 28 Pipe
ASME B16.9
Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Equal 1 24 Same As BW
ASME B16.9
Pipe
1 1/2 1 Thickness
ASTM A234 Gr. WPB, Seamless,
X X Same As BW
ASME B16.9
24 20 Pipe
Tee Reducing
28 16 Thickness
ASTM A234 Gr. WPB, Welded,
X X Same As BW
ASME B16.9
28 22 Pipe
1 1/2 1 Thickness
ASTM A234 Gr. WPB, Seamless,
X X Same As BW
ASME B16.9
Reducer 24 20 Pipe
Concentric 28 18 Thickness
ASTM A234 Gr. WPB, Welded,
X X Same As BW
ASME B16.9
28 18 Pipe
1 1/2 1 Thickness
ASTM A234 Gr. WPB, Seamless,
X X Same As BW
ASME B16.9
Reducer 24 20 Pipe
Eccentric 28 18 Thickness
ASTM A234 Gr. WPB, Welded,
X X Same As BW
ASME B16.9
28 18 Pipe
Class 061440YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Thickness
Weldolet 1 8 Same As BW ASTM A105N, MSS SP 97 Note 2
Pipe
600# /
Thickness RF / ASTM A105N, MFG. STD., Flanged
Flangeolet 1 2 Note 2
Same As 3.2-6.3 m end as per ASME B16.5
Pipe
1 20 ASTM A105N, ASME B16.5
600# /
22 22 Thickness RF / ASTM A105N, MSS SP 44
WN Flange
24 24 Same As 3.2-6.3 m ASTM A105N, ASME B16.5
Pipe
28 28 ASTM A105N, ASME B16.47 SR.A
1500# /
Thickness RF /
WN Flange 10 18 ASTM A105N, ASME B16.5 Note 7
Same As 3.2-6.3 m
Pipe
1 20 ASTM A105N, ASME B16.5
22 22 RF / ASTM A105N, MSS SP 44
Blind Flange 600#
24 24 3.2-6.3 m ASTM A105N, ASME B16.5
28 28 ASTM A105N, ASME B16.47 SR.A
600# /
Thickness
RF /
Orifice Flange 1 24 Same As ASTM A105N, ASME B16.36
3.2-6.3 m
Pipe
RF /
Spectacle Blind 1 6 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 24 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled, SS316
Winding, SS 316L Inner Ring / CS
1 20
Centering Ring, ASME B16.20
Thk.=4.5mm
Gasket 600# -
Spiral Wound, Graphite filled, SS316
Winding, SS 316L Inner Ring / CS
22 22
Centering Ring, MSS SP 44
Thk.=4.5mm
Spiral Wound, Graphite filled, SS316
Winding, SS 316L Inner Ring / CS
Gasket 24 28 600# -
Centering Ring, ASME B16.20
Thk.=4.5mm
Spiral Wound, Graphite filled, SS316
Winding, SS 316L Inner Ring / CS
Gasket 10 18 1500# -
Centering Ring, ASME B16.20
Thk.=4.5mm
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061440YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Bolt Full threaded, Heavy Hexagonal
Nut, ASTM A193 Gr. B7M / A194 Gr.
Stud Bolt / Nut 1 28 All -
2HM, Zn Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF311HLNX
Body:A105N, Ball: 13%CR, RPTFE, Note
1 1 1/2 600#
Floating Ball, ISO 17292, Lever 1,4
Operated,
BF312HLNX
Body:A216 Gr. WCB, Ball: 13%CR, Note
2 4 600#
RPTFE, Trunnion Mounted, API 6D, 1,4
Lever Operated,
Flanged RF
Ball Valve (FB) BF312HGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: 13%CR, Note
6 8 600#
RPTFE, Trunnion Mounted, API 6D, 1,4
Gear Operated,
BF312SGNX
Body:A216 Gr. WCB, Ball: CS +
Note
10 24 600# 3mm 13%CR Weld Overlay, RPTFE,
1,4
Trunnion Mounted, API 6D, Gear
Operated,
BR311HLNX
Body:A105N, Ball: 13%CR, RPTFE,
1 1 1/2 600# Note 4
Floating Ball, ISO 17292, Lever
Operated,
BR312HLNX
Flanged RF Body:A216 Gr. WCB, Ball: 13%CR,
Ball Valve (RB) 2 4 600# Note 4
/ 3.2-6.3 m RPTFE, Trunnion Mounted, API 6D,
Lever Operated,
BR312HGNX
Body:A216 Gr. WCB, Ball: 13%CR,
6 8 600#
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR312SGNX
Body:A216 Gr. WCB, Ball: CS +
Flanged RF
Ball Valve (RB) 10 24 600# 3mm 13%CR Weld Overlay, RPTFE, Note 4
/ 3.2-6.3 m
Trunnion Mounted, API 6D, Gear
Operated,
GA311FHNX
Body:A105N, Wedge: 13%CR +
1 1 1/2 600# Note 4
Stellite 6, API 602, Handwheel
Flanged RF Operated,
Gate Valve
/ 3.2-6.3 m GA312FHNX
Body:A216 Gr. WCB, Wedge:
2 4 600# Note 4
13%CR + Stellite 6, API 600,
Handwheel Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061440YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
GA312FGNX
Body:A216 Gr. WCB, Wedge:
6 8 600# Note 4
13%CR + Stellite 6, API 600, Gear
Flanged RF Operated,
Gate Valve
/ 3.2-6.3 m GA312GGNX
Body:A216 Gr. WCB, Wedge: CS +
10 24 600# Note 4
3mm 13%CR Weld Overlay, API
600, Gear Operated,
GL311FHNX
1 1 1/2 600# Body:A105N, Disc: 13%CR+ Stellite Note 4
6, ISO 15761, Handwheel Operated,
GL312FHNX
Flanged RF Body:A216 Gr. WCB, Disc: 13%CR
Globe Valve 2 4 600# Note 4
/ 3.2-6.3 m + Stellite 6, BS 1873, Handwheel
Operated,
GL312FGNX
6 8 600# Body:A216 Gr. WCB, Disc: 13%CR Note 4
+ Stellite 6, BS 1873, Gear Operated
NE311FHNX
Flanged RF Note
Needle Valve 1 1 1/2 600# Body:A105N, Disc: 13%CR + Stellite
/ 3.2-6.3 m 4,5
6, ISO 15761, Handwheel Operated,
CP311FANX
Flanged RF
1 1 1/2 600# Piston Lift Type, Body:A105N, Disc: Note 4
/ 3.2-6.3 m
13%CR + Stellite 6, ISO 15761,
Check Valve CW392FANX
Wafer Lug / Dual Plate Wafer Lug Type, Body:
2 8 600# Note 4
3.2-6.3 m A216 Gr. WCB, Disc: 13%CR +
Stellite 6, API 594 Type A,
CW392GANX
Dual Plate Wafer Lug Type, Body:
Wafer Lug /
Check Valve 10 24 600# A216 Gr. WCB, Disc: CS + 3mm Note 4
3.2-6.3 m
13%CR Weld Overlay, API 594 Type
A,
Flanged RF DB371HLNX
Double Block and Note
1 2 600# (3.2-6.3 m) Body:A105N, Ball: 13%CR, RPTFE,
Bleed Valve 4,6
x NPT(F) Floating Ball, Lever Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type.
3) All material shall be suitable for use in sour environment and shall be certified to NACE MR 0175 / ISO 15156
Latest Edition.
4) C.A. = 6mm shall be considered in thickness calculation for carbon steel parts in contact with fluid.
5) Use for sample connection.
6) Use for interface with instruments.
7) Use for connection with Class 1500 rating flanges / nozzles etc.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061441YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1 2 Sch.XXS
3 4 Sch.160 ASTM A106 Gr. B, Seamless,
Pipe BE
6 8 Sch.120 ASME B36.10M
10 24 Sch.100
Thickness
ASTM A234 Gr. WPB, Seamless,
Cap 1 24 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
45 Elbow 1 24 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
90 Elbow 1 24 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Equal 1 24 Same As BW
ASME B16.9
Pipe
1 1/2 1 Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Reducing X X Same As BW
ASME B16.9
24 20 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Concentric ASME B16.9
24 20 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Eccentric ASME B16.9
24 20 Pipe
ASTM A106 Gr. B, Seamless,
Nipple 1 1 1/2 Sch.XXS BBE
ASME B36.10M, L=100mm
Thickness
Weldolet 1 8 Same As BW ASTM A105N, MSS SP 97 Note 2
Pipe
600# /
Thickness RF / ASTM A105N, MFG. STD., Flanged
Flangeolet 1 2 Note 2
Same As 3.2-6.3 m end as per ASME B16.5
Pipe
600# /
Thickness RF /
WN Flange 1 24 ASTM A105N, ASME B16.5
Same As 3.2-6.3 m
Pipe
1500# /
Thickness RF /
WN Flange 10 18 ASTM A105N, ASME B16.5 Note 7
Same As 3.2-6.3 m
Pipe
RF /
Blind Flange 1 24 600# ASTM A105N, ASME B16.5
3.2-6.3 m
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061441YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
600# /
Thickness
RF /
Orifice Flange 1 24 Same As ASTM A105N, ASME B16.36
3.2-6.3 m
Pipe
RF /
Spectacle Blind 1 6 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 24 600# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 1 24 600# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
Gasket 10 18 1500# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1 24 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF311DLNX
Body:A105N, Ball: Inconel 625,
1 1 1/2 600# Note 1,4
RPTFE, Floating Ball, ISO 17292,
Lever Operated,
BF312DLNX
Body:A216 Gr. WCB, Ball: Inconel
2 4 600# Note 1,4
625, RPTFE, Trunnion Mounted,
API 6D, Lever Operated,
Flanged RF
Ball Valve (FB) BF312DGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: Inconel
6 8 600# Note 1,4
625, RPTFE, Trunnion Mounted,
API 6D, Gear Operated,
BF312VGNX
Body:A216 Gr. WCB, Ball: CS +
10 24 600# 3mm Inconel 625 Weld Overlay, Note 1,4
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
BR311DLNX
Body:A105N, Ball: Inconel 625,
1 1 1/2 600# Note 4
RPTFE, Floating Ball, ISO 17292,
Flanged RF Lever Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR312DLNX
Body:A216 Gr. WCB, Ball: Inconel
2 4 600# Note 4
625, RPTFE, Trunnion Mounted,
API 6D, Lever Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061441YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR312DGNX
Body:A216 Gr. WCB, Ball: Inconel
6 8 600#
625, RPTFE, Trunnion Mounted,
API 6D, Gear Operated,
BR312VGNX
Body:A216 Gr. WCB, Ball: CS +
10 24 600# 3mm Inconel 625 Weld Overlay, Note 4
RPTFE, Trunnion Mounted, API 6D,
Gear Operated,
GA311AHNX
Body:A105N, Wedge: Inconel 625 +
1 1 1/2 600# Note 4
Stellite 6, API 602, Handwheel
Operated,
GA312AHNX
Body:A216 Gr. WCB, Wedge:
2 4 600# Note 4
Inconel 625 + Stellite 6, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA312AGNX
Body:A216 Gr. WCB, Wedge:
6 8 600# Note 4
Inconel 625 + Stellite 6, API 600,
Gear Operated,
GA312EGNX
Body:A216 Gr. WCB, Wedge: CS +
10 24 600# Note 4
3mm Inconel 625 Weld Overlay,
API 600, Gear Operated,
GL311AHNX
Body:A105N, Disc: Inconel 625+
1 1 1/2 600# Note 4
Stellite 6, ISO 15761, Handwheel
Operated,
GL312AHNX
Flanged RF Body:A216 Gr. WCB, Disc: Inconel
Globe Valve 2 4 600# Note 4
/ 3.2-6.3 m 625 + Stellite 6, BS 1873,
Handwheel Operated,
GL312AGNX
Body:A216 Gr. WCB, Disc: Inconel
6 8 600# Note 4
625 + Stellite 6, BS 1873, Gear
Operated,
NE311AHNX
Flanged RF Body:A105N, Disc: Inconel 625 +
Needle Valve 1 1 1/2 600# Note 4,5
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
CP311AANX
Flanged RF
Check Valve 1 1 1/2 600# Piston Lift Type, Body:A105N, Disc: Note 4
/ 3.2-6.3 m
Inconel 625 + Stellite 6, ISO 15761,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 061441YG
Service FS Corrosion Allowance 6 mm
Rating/Facing 600 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 102.1 102.1 100.2 93.2 90.2
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CW392AANX
Dual Plate Wafer Lug Type, Body:
2 8 600# Note 4
A216 Gr. WCB, Disc: Inconel 625 +
Stellite 6, API 594 Type A,
Wafer Lug /
CW392EANX
3.2-6.3 m
Dual Plate Wafer Lug Type, Body:
10 24 600# A216 Gr. WCB, Disc: CS + 3mm Note 4
Inconel 625 Weld Overlay, API 594
Type A,
DB371DLNX
Flanged RF
Double Block and Body:A105N, Ball: Inconel 625,
1 2 600# (3.2-6.3 m) Note 4,6
Bleed Valve RPTFE, Floating Ball, Lever
x NPT(F)
Operated,
Notes:
Class 063411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 600 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 to 150
Pressure Bar g 110.7
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Class 063411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 600 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 to 150
Pressure Bar g 110.7
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 3 600# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A320 Gr. L7
Stud Bolt / Nut 1/2 3 All -
/ A194 Gr. 7, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
Body:A182 F316/316L, Ball: SS316,
Flanged RF
Ball Valve (RB) 1/2 1 1/2 600# Filled RPTFE, Floating Ball, ISO
/ 3.2-6.3 m
17292, Lever Op,
Flanged RF Body:A182 F316/316L, Ball: SS316,
Double Block and
1/2 1” 1/2 600# (3.2-6.3 m) Filled RPTFE, Floating Ball, Lever Note 4
Bleed Valve
x NPT(F) Operated,
Notes:
Class 091440XG
Service FS, DC Corrosion Allowance 6 mm
Rating/Facing 900 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 83
Pressure Bar g 143.0 143.0 143.0 143.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1 3 Sch.XXS
4 6 Sch.160 ASTM A106 Gr. B, Seamless,
Pipe BE
8 10 Sch. 140 ASME B36.10M
12 20 Sch.120
Thickness
ASTM A234 Gr. WPB, Seamless,
Cap 1 20 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
45 Elbow 1 20 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
90 Elbow 1 20 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Equal 1 20 Same As BW
ASME B16.9
Pipe
1 1/2 1 Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Reducing X X Same As BW
ASME B16.9
20 18 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Concentric ASME B16.9
20 18 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Eccentric ASME B16.9
20 18 Pipe
ASTM A106 Gr. B, Seamless,
Nipple 1 1 1/2 Sch.XXS BBE
ASME B36.10M, L=100mm
Thickness
Weldolet 1 6 Same As BW ASTM A105N, MSS SP 97 Note 2
Pipe
1500# /
Thickness RF / ASTM A105N, MFG. STD., Flanged
Flangeolet 1 2 Note 2
Same As 3.2-6.3 m end as per ASME B16.5
Pipe
ASTM A105, Seamless, L=450mm
Flanged (One flanged end
Ends RTJ- 1.6 m to suit API 5000 Type
Transition Piece 4 1/16 x 6 Sch. 160 Note 9
(4 1/16-RTJ 6B 4 1/16” flange and other flanged
and 6-RF) end RF – Ra 3.2-6.3 m to suit 6”
ASME Cl.900 Flange)
1500# /
Thickness RF /
WN Flange 1 2 ASTM A105N, ASME B16.5
Same As 3.2-6.3 m
Pipe
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 091440XG
Service FS, DC Corrosion Allowance 6 mm
Rating/Facing 900 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 83
Pressure Bar g 143.0 143.0 143.0 143.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
900# /
Thickness RF /
3 20 ASTM A105N, ASME B16.5
Same As 3.2-6.3 m
Pipe
RF /
1 2 1500# ASTM A105N, ASME B16.5
3.2-6.3 m
Blind Flange
RF /
3 20 900# ASTM A105N, ASME B16.5
3.2-6.3 m
1500# /
Thickness RF /
1 2 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
Orifice Flange
900# /
Thickness RF /
3 20 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
API 5000 /
Thickness RTJ /
WN Flange 4 1/16 4 1/16 ASTM A105N, API 6A Type 6B Note 5
Same As 1.6 m
Pipe
RF /
1 2 1500# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spectacle Blind
RF /
3 6 900# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 20 900# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316L Winding, SS 316L Inner
1 2 1500# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Gasket
Spiral Wound, Graphite filled,
SS316L Winding, SS 316L Inner
3 20 900# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Octagonal Ring Type, Soft Iron,
Gasket 4 1/16 4 1/16 API 5000 - Max. Hardness 90 BHN, API 6A Note 5
Type 6B
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1 20 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF611JLNX
Flanged RF Body:A105N, Ball: 13%CR, PEEK,
Ball Valve (FB) 1 1 1/2 1500# Note 1,4
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 091440XG
Service FS, DC Corrosion Allowance 6 mm
Rating/Facing 900 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 83
Pressure Bar g 143.0 143.0 143.0 143.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BF612JLNX
Body:A216 Gr. WCB, Ball: 13%CR,
2 2 1500# Note 1,4
PEEK, Trunnion Mounted, API 6D,
Lever Operated.,
BF512JLNX
Body:A216 Gr. WCB, Ball: 13%CR,
3 3 900# Note 1,4
PEEK, Trunnion Mounted, API 6D,
Lever Operated.,
BF512JGNX
Body:A216 Gr. WCB, Ball: 13%CR
4 8 900# Note 1,4
PEEK, Trunnion Mounted, API 6D,
Gear Operated.,
BF512TGNX
Body:A216 Gr. WCB, Ball: CS +
10 20 900# 3mm 13%CR Weld Overlay, PEEK, Note 1,4
Trunnion Mounted, API 6D, Gear
Operated.,
BR611JLNX
Body:A105N, Ball: 13%CR, PEEK,
1 1 1/2 1500# Note 4
Floating Ball, ISO 17292, Lever
Operated,
BR612JLNX
Body:A216 Gr. WCB, Ball: 13%CR,
2 2 1500# Note 4
PEEK, Trunnion Mounted, API 6D,
Flanged RF Lever Operated.,
Ball Valve (RB)
/ 3.2-6.3 m BR512JLNX
Body:A216 Gr. WCB, Ball: 13%CR,
3 3 900# Note 4
PEEK, Trunnion Mounted, API 6D,
Lever Operated.,
BR512JGNX
Body:A216 Gr. WCB, Ball: 13%CR,
4 8 900# Note 4
PEEK, Trunnion Mounted, API 6D,
Gear Operated.,
BR512TGNX
Body:A216 Gr. WCB, Ball: CS +
Flanged RF
Ball Valve (RB) 10 20 900# 3mm 13%CR Weld Overlay, PEEK, Note 4
/ 3.2-6.3 m
Trunnion Mounted, API 6D, Gear
Operated.,
GA611FHNX
Body:A105N, Wedge:13%CR +
1 1 1/2 1500# Note 4
Stellite 6, API 602, Handwheel
Flanged RF Operated,
Gate Valve
/ 3.2-6.3 m GA612FHNX
Body:A216 Gr. WCB, Wedge:
2 2 1500# Note 4
13%CR + Stellite 6, API 600,
Handwheel Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 091440XG
Service FS, DC Corrosion Allowance 6 mm
Rating/Facing 900 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 83
Pressure Bar g 143.0 143.0 143.0 143.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
GA512FHNX
Body:A216 Gr. WCB, Wedge:
3 3 900# Note 4
13%CR + Stellite 6, API 600,
Handwheel Operated,
GA512FGNX
Body:A216 Gr. WCB, Wedge:
4 8 900# Note 4
13%CR + Stellite 6, API 600, Gear
Operated,
GA512GGNX
Body:A216 Gr. WCB, Wedge: CS +
10 20 900# Note 4
3mm 13%CR Weld Overlay, API
600, Gear Operated,
GL611FHNX
Body:A105N, Disc: 13%CR +
1 1 1/2 1500# Note 4
Stellite 6, ISO 15761, Handwheel
Operated,
GL612FHNX
Body:A216 Gr. WCB, Disc: 13%CR
2 2 1500# Note 4
+ Stellite 6, BS 1873, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL512FHNX
Body:A216 Gr. WCB, Disc: 13%CR
3 3 900# Note 4
+ Stellite 6, BS 1873, Handwheel
Operated,
GL512FGNX
Body:A216 Gr. WCB, Disc: 13%CR
4 8 900# Note 4
+ Stellite 6, BS 1873, Gear
Operated,
NE611FHNX
Flanged RF Body:A105N, Disc: 13%CR +
Needle Valve 1 1 1/2 1500# Note 4,6
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
CP611FANX
Flanged RF
Check Valve 1 1 1/2 1500# Piston Lift Type, Body:A105N, Disc: Note 4
/ 3.2-6.3 m
13%CR + Stellite 6, ISO 15761,
CW692FANX
Dual Plate Wafer Lug Type, Body:
2 2 1500# Note 4
A216 Gr. WCB, Disc: 13%CR +
Wafer Lug / Stellite 6, API 594 Type A,
Check Valve
3.2-6.3 m CW592FANX
Dual Plate Wafer Lug Type, Body:
3 8 900# Note 4
A216 Gr. WCB, Disc: 13%CR +
Stellite 6, API 594 Type A,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 091440XG
Service FS, DC Corrosion Allowance 6 mm
Rating/Facing 900 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 83
Pressure Bar g 143.0 143.0 143.0 143.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CW592GANX
Dual Plate Wafer Lug Type, Body:
10 20 900# A216 Gr. WCB, Disc: CS + 3mm Note 4
13%CR Weld Overlay, API 594
Type A,
Flanged RF DB671JLNX
1 2 1500# (3.2-6.3 m) Body:A105N, Ball: 13%CR, PEEK, Note 4,7
Double Block and x NPT(F) Floating Ball, Lever Operated,
Bleed Valve DB611JLNX
Flanged RF
1 2 1500# Body:A105N, Ball: 13%CR, PEEK, Note 4,8
/ 3.2-6.3 m
Floating Ball, Lever Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type.
3) All material shall be suitable for use in sour environment and shall be certified to NACE MR 0175 / ISO 15156
Latest Edition.
4) C.A. = 6mm shall be considered in thickness calculation for carbon steel parts in contact with fluid.
5) Use only at interface with API 5000 flanges at wellhead.
6) Use for sample connection.
7) Use for interface with instruments.
8) Use for chemical injection lines.
9) Use only at well heads to connect API flange and ASME pipe.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 093411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 900 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 38 50 100 150
Pressure Bar g 148.9 148.9 144.3 126.6 115.5
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
ASTM A312 TP316/316L,
Pipe 1/2 3 Sch.40S BE
Seamless, ASME B36.19M
Thickness
ASTM A403 WP316/316L-S,
Cap 1/2 3 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S, L.R.,
45 Elbow 1/2 3 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S, L.R.,
90 Elbow 1/2 3 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S,
Tee Equal 1/2 3 Same As BW
ASME B16.9
Pipe
3/4 1/2 Thickness
ASTM A403 WP316/316L-S,
Tee Reducing X X Same As BW
ASME B16.9
3 2 Pipe
3/4 1/2 Thickness
Reducer ASTM A403 WP316/316L-S,
X X Same As BW
Concentric ASME B16.9
3 2 Pipe
3/4 1/2 Thickness
Reducer ASTM A403 WP316/316L-S,
X X Same As BW
Eccentric ASME B16.9
3 2 Pipe
ASTM A312 TP 316/316L,
Nipple 1/2 1 1/2 Sch.40S BBE Seamless, ASME B36.19M,
L=100mm
Thickness
ASTM A182 F316/316L, MSS SP
Weldolet 1/2 1 Same As BW Note 2
97
Pipe
1500# /
ASTM A182 F316/316L, MFG.
Thickness RF /
Flangeolet 1/2 2 STD., Flanged end as per ASME Note 2
Same As 3.2-6.3 m
B16.5
Pipe
1500# /
Thickness RF / ASTM A182 F316/316L, ASME
1/2 2
Same As 3.2-6.3 m B16.5
Pipe
WN Flange
900# /
Thickness RF / ASTM A182 F316/316L, ASME
3 3
Same As 3.2-6.3 m B16.5
Pipe
RF /
1/2 2 1500# ASTM A182 F316, ASME B16.5
3.2-6.3 m
Blind Flange
RF /
3 3 900# ASTM A182 F316, ASME B16.5
3.2-6.3 m
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 093411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 900 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 38 50 100 150
Pressure Bar g 148.9 148.9 144.3 126.6 115.5
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1500# /
Thickness RF / ASTM A182 F316/316L, ASME
1 2
Same As 3.2-6.3 m B16.36
Pipe
Orifice Flange
900# /
Thickness RF / ASTM A182 F316/316L, ASME
3 3
Same As 3.2-6.3 m B16.36
Pipe
RF /
1/2 2 1500# ASTM A240-316, ASME B16.48
3.2-6.3 m
Spectacle Blind
RF /
3 3 900# ASTM A240-316, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
1/2 2 1500# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Gasket
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
3 3 900# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A320 Gr.L7 /
Stud Bolt / Nut 1/2 3 All -
A194 Gr.7, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF6157L
Body:A182 F316/316L, Ball: SS316,
1/2 1 1/2 1500# Note 1
PEEK, Floating Ball, ISO 17292,
Lever Operated,
BF6167L
Body:A351 CF8M, Ball: SS316,
2 2 1500# Flanged RF Note 1
Ball Valve (FB) PEEK, Trunnion Mounted, API 6D,
/ 3.2-6.3 m
Lever Operated,
BF5167L
Body:A351 CF8M, Ball: SS316,
3 3 900# PEEK, Trunnion Mounted, API 6D, Note 1
Lever Operated,
BR6157L
Body:A182 F316/316L, Ball: SS316,
1/2 1 1/2 1500#
PEEK, Floating Ball, ISO 17292,
Flanged RF Lever Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR6167L
Body:A351 CF8M, Ball: SS316,
2 2 1500#
PEEK, Trunnion Mounted, API 6D,
Lever Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 093411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 900 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 38 50 100 150
Pressure Bar g 148.9 148.9 144.3 126.6 115.5
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR5167L
Body:A351 CF8M, Ball: SS316,
3 3 900#
PEEK, Trunnion Mounted, API 6D,
Lever Operated,
GL6154H
Body:A182 F316/316L, Disc:SS316
1/2 1 1/2 1500#
+ Stellite 6, ISO 15761, Handwheel
Operated,
GL6164H
Flanged RF Body:A351 CF8M, Disc:SS316 +
Globe Valve 2 2 1500#
/ 3.2-6.3 m Stellite 6, BS 1873, Handwheel
Operated,
GL5164H
Body:A351 CF8M, Disc:SS316 +
3 3 900#
Stellite 6, BS 1873, Handwheel
Operated,
NE6154H
Flanged RF Body:A182 F316/316L, Disc:SS316
Needle Valve 1/2 1 1/2 1500# Note 3
/ 3.2-6.3 m + Stellite 6, ISO 15761, Handwheel
Operated,
CP6154A
Flanged RF Piston Lift Type, Body:A182
1/2 1 1/2 1500#
/ 3.2-6.3 m F316/316L, Disc:SS316 + Stellite 6,
ISO 15761,
CW6964A
Dual Plate Wafer Lug Type,
2 2 1500# Body:A351 CF8M, Disc:SS316 +
Check Valve
Stellite 6, API 594 Type A,
Wafer Lug /
3.2-6.3 m CW5964A
Dual Plate Wafer Lug Type,
3 3 900# Body:A351 CF8M, Disc:SS316 +
Stellite 6, API 594 Type A,
DB6757L
Flanged RF
Body:A182 F316/316L, Ball: SS316,
1/2 2 1500# (3.2-6.3 m) Note 4
PEEK, Floating Ball, Lever
x NPT(F)
Double Block and Operated,
Bleed Valve DB6157L
Flanged RF Body:A182 F316/316L, Ball: SS316, Note 4,
1/2 2 1500#
(3.2-6.3 m) PEEK, Floating Ball, Lever 5
Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type
3) Use for sample connection.
4) Use for interface with instruments
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 093811XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 900 # / RF Material Duplex SS (S31803)
Temperature ºC -29 38 50 100 150
Pressure Bar g 155.1 155.1 155.1 152.0 137.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
RF /
3 3 900# ASTM A182 F51, ASME B16.5
3.2-6.3 m
1500# /
Thickness RF /
1 2 ASTM A182 F51, ASME B16.36
Same As 3.2-6.3 m
Pipe
Orifice Flange
900# /
Thickness RF /
3 3 ASTM A182 F51, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
1/2 2 1500# ASTM A240-S31803, ASME B16.48
3.2-6.3 m
Spectacle Blind
RF /
3 3 900# ASTM A240-S31803, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled, UNS
S31803 Winding, UNS S31803
1/2 2 1500# -
Inner Ring / Centering Ring, ASME
B16.20 Thk.=4.5mm
Gasket
Spiral Wound, Graphite filled, UNS
S31803 Winding, UNS S31803
3 3 900# -
Inner Ring / Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A320 Gr.L7 /
Stud Bolt / Nut 1/2 3 All -
A194 Gr.7, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF61APL
Body:A182 F51, Ball: UNS S31803,
1/2 1 1/2 1500# Note 1
PEEK, Floating Ball, ISO 17292,
Lever Operated,
BF61BPL
Body:A890 Gr.4A Ball: UNS
2 2 1500# Flanged RF Note 1
Ball Valve (FB) S31803, PEEK, Trunnion Mounted,
/ 3.2-6.3 m
API 6D, Lever Operated,
BF51BPL
Body:A890 Gr.4A Ball: UNS
3 3 900# S31803, PEEK, Trunnion Mounted, Note 1
API 6D, Lever Operated,
BR61APL
Body:A182 F51, Ball: UNS S31803,
1/2 1 1/2 1500#
PEEK, Floating Ball, ISO 17292,
Flanged RF Lever Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR61BPL
Body:A890 Gr.4A Ball: UNS
2 2 1500#
S31803, PEEK, Trunnion Mounted,
API 6D, Lever Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 093811XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 900 # / RF Material Duplex SS (S31803)
Temperature ºC -29 38 50 100 150
Pressure Bar g 155.1 155.1 155.1 152.0 137.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR51BPL
Body:A890 Gr.4A Ball: UNS
3 3 900#
S31803, PEEK, Trunnion Mounted,
API 6D, Lever Operated,
GL61AQH
Body:A182 F51, Disc:UNS S31803
1/2 1 1/2 1500#
+ Stellite 6, ISO 15761, Handwheel
Operated,
GL61BQH
Flanged RF Body:A890 Gr.4A, Disc:UNS
Globe Valve 2 2 1500#
/ 3.2-6.3 m S31803 + Stellite 6, BS 1873,
Handwheel Operated,
GL51BQH
Body:A890 Gr.4A, Disc:UNS
3 3 900#
S31803 + Stellite 6, BS 1873,
Handwheel Operated,
NE61AQH
Flanged RF Body:A182 F51, Disc:UNS S31803
Needle Valve 1/2 1 1/2 1500# Note 3
/ 3.2-6.3 m + Stellite 6, ISO 15761, Handwheel
Operated,
CP61AQA
Flanged RF Piston Lift Type, Body:A182 F51,
1/2 1 1/2 1500#
/ 3.2-6.3 m Disc:UNS S31803 + Stellite 6, ISO
15761,
CW69BQA
Dual Plate Wafer Lug Type,
2 2 1500# Body:A890 Gr.4A, Disc:UNS
Check Valve
S31803 + Stellite 6, API 594 Type A
Wafer Lug /
3.2-6.3 m CW59BQA
Dual Plate Wafer Lug Type,
3 3 900# Body:A890 Gr.4A, Disc:UNS
S31803 + Stellite 6, API 594 Type A
DB67APL
Flanged RF
Body:A182 F51, Ball: UNS S31803,
1/2 2 1500# (3.2-6.3 m) Note 4
PEEK, Floating Ball, Lever
x NPT(F)
Double Block and Operated,
Bleed Valve DB61APL
Flanged RF Body:A182 F51, Ball: UNS S31803, Note 4,
1/2 2 1500#
(3.2-6.3 m) PEEK, Floating Ball, Lever 5
Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type
3) Use for sample connection.
4) Use for interface with instruments
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
1/2 6 Sch.XXS
8 8 25.4mm
10 10 31.75mm
12 12 34mm
ASTM A106 Gr. B, Seamless,
14 14 37mm
ASME B36.10M
16 16 42mm
Pipe 18 18 46mm BE
20 20 51mm
24 24 60mm
26 26 54mm
28 28 58mm ASTM A672 Gr.C65 CL.22, EFW,
100% Radiography, ASME
30 30 62mm B36.10M
32 32 65mm
Thickness
ASTM A234 Gr. WPB, Seamless,
Cap 1/2 32 Same As BW
ASME B16.9
Pipe
ASTM A234 Gr. WPB, Seamless,
1/2 24 Thickness
L.R., ASME B16.9
45 Elbow Same As BW
ASTM A234 Gr. WPB, Welded,
26 32 Pipe
L.R., ASME B16.9
ASTM A234 Gr. WPB, Seamless,
1/2 24 Thickness
L.R., ASME B16.9
90 Elbow Same As BW
ASTM A234 Gr. WPB, Welded,
26 32 Pipe
L.R., ASME B16.9
ASTM A234 Gr. WPB, Seamless,
1/2 24 Thickness
ASME B16.9
Tee Equal Same As BW
ASTM A234 Gr. WPB, Welded,
26 32 Pipe
ASME B16.9
3/4 1/2
ASTM A234 Gr. WPB, Seamless,
x x
Thickness ASME B16.9
24 20
Tee Reducing Same As BW
26 12
Pipe ASTM A234 Gr. WPB, Welded,
x x
ASME B16.9
32 30
3/4 1/2
ASTM A234 Gr. WPB, Seamless,
x x
Thickness ASME B16.9
Reducer 24 20
Same As BW
Concentric 26 18
Pipe ASTM A234 Gr. WPB, Welded,
x x
ASME B16.9
32 30
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151432XG
Service WI Corrosion Allowance 3 mm
Rating/Facing 1500 # / RF Material C.S.
Temperature ºC -5 38 50 83
Pressure Bar g 239.0 239.0 239.0 239.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
3/4 1/2
ASTM A234 Gr. WPB, Seamless,
x x
Thickness ASME B16.9
Reducer 24 20
Same As BW
Eccentric 26 18
Pipe ASTM A234 Gr. WPB, Welded,
x x
ASME B16.9
32 30
ASTM A106 Gr. B, Seamless,
Nipple 1/2 1 1/2 Sch.XXS BBE
ASME B36.10M, L=100mm
ASTM A106 Gr. B, Seamless,
Nipple 1/2 1 1/2 Sch.XXS BOE/TOE
ASME B36.10M, L=100mm
Thickness
Weldolet 1/2 12 Same As BW ASTM A105N, MSS SP 97 Note 2
Pipe
1500# /
Thickness RF / ASTM A105N, MFG. STD., Flanged
Flangeolet 1/2 2 Note 2
Same As 3.2-6.3 m end as per ASME B16.5
Pipe
1500# /
Thickness RF /
WN Flange 1/2 24 ASTM A105N, ASME B16.5
Same As 3.2-6.3 m
Pipe
RF /
Blind Flange 1/2 24 1500# ASTM A105N, ASME B16.5
3.2-6.3 m
1500# /
Thickness RF /
Orifice Flange 1 24 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 6 1500# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 24 1500# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 24 1500# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr. B7
Stud Bolt / Nut 1/2 24 All -
/ A194 Gr. 2H, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF6117L
Flanged RF Body:A105N, Ball: SS316,PEEK,
Ball Valve (FB) 1/2 1 1/2 1500# Note 1
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
BF6127L
Flanged RF Body:A216 Gr. WCB, Ball: SS316,
Ball Valve (FB) 2 3 1500# Note 1
/ 3.2-6.3 m PEEK, Trunnion Mounted, API 6D,
Lever Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151432XG
Service WI Corrosion Allowance 3 mm
Rating/Facing 1500 # / RF Material C.S.
Temperature ºC -5 38 50 83
Pressure Bar g 239.0 239.0 239.0 239.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BF6127G
Body:A216 Gr. WCB, Ball: SS316,
4 8 1500# Note 1
PEEK, Trunnion Mounted, API 6D,
Gear Operated,
BF612UG
Body:A216 Gr. WCB, Ball: CS +
10 24 1500# 3mm SS316 Weld Overlay, PEEK, Note 1
Trunnion Mounted, API 6D, Gear
Operated,
BR6117L
Body:A105N, Ball: SS316,PEEK,
1/2 1 1/2 1500#
Floating Ball, ISO 17292, Lever
Operated,
BR6127L
Body:A216 Gr. WCB, Ball: SS316,
2 3 1500#
PEEK, Trunnion Mounted, API 6D,
Lever Operated,
Flanged RF
Ball Valve (RB) BR6127G
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: SS316,
4 8 1500#
PEEK, Trunnion Mounted, API 6D,
Gear Operated,
BR612UG
Body:A216 Gr. WCB, Ball: CS +
10 24 1500# 3mm SS316 Weld Overlay, PEEK,
Trunnion Mounted, API 6D, Gear
Operated,
GA6114H
Body:A105N, Wedge:SS316 +
1/2 1 1/2 1500#
Stellite 6, API 602, Handwheel
Operated,
GA6124H
Flanged RF Body:A216 Gr. WCB,
Gate Valve 2 3 1500#
/ 3.2-6.3 m Wedge:SS316 + Stellite 6, API 600,
Handwheel Operated,
GA6124G
Body:A216 Gr. WCB,
4 8 1500#
Wedge:SS316 + Stellite 6, API 600
/ ASME B16.34, Gear Operated,
GA612UG
Flanged RF Body:A216 Gr. WCB, Wedge: CS +
Gate Valve 10 24 1500#
/ 3.2-6.3 m 3mm SS316 Weld Overlay, API
600, Gear Operated,
GL6114H
Flanged RF Body:A105N, Disc:SS316 + Stellite
Globe Valve 1/2 1 1/2 1500#
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151432XG
Service WI Corrosion Allowance 3 mm
Rating/Facing 1500 # / RF Material C.S.
Temperature ºC -5 38 50 83
Pressure Bar g 239.0 239.0 239.0 239.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
GL6124H
Body:A216 Gr. WCB, Disc:SS316 +
2 3 1500#
Stellite 6, BS 1873, Handwheel
Operated,
GL6124G
4 8 1500# Body:A216 Gr. WCB, Disc:SS316 +
Stellite 6, BS 1873, Gear Operated
NE6114H
Flanged RF Body:A105N, Disc:SS316 + Stellite
Needle Valve 1/2 1 1/2 1500# Note 3
/ 3.2-6.3 m 6, ISO 15761, Handwheel
Operated,
CP6114A
Flanged RF
1/2 1 1/2 1500# Piston Lift Type, Body:A105N,
/ 3.2-6.3 m
Disc:SS316 + Stellite 6, ISO 15761,
CW6924A
Dual Plate Wafer Lug Type, Body:
2 8 1500#
A216 Gr. WCB, Disc:SS316 +
Check Valve
Stellite 6, API 594 Type A
Wafer Lug /
CW692UA
3.2-6.3 m
Dual Plate Wafer Lug Type, Body:
10 24 1500# A216 Gr.WCB, Disc: CS + 3mm
SS316 Weld Overlay, API 594 Type
A
CS6124A
Flanged RF Swing Check Valve, Body:A216 Gr.
Check Valve 2 8 1500# Note 5
/ 3.2-6.3 m WCB, Disc: SS316 + Stellite 6, API
594 Type B
Flanged RF DB6717L
Double Block and
1/2 2 1500# (3.2-6.3 m) Body:A105N, Ball: SS316,PEEK, Note 4
B leed Valve
x NPT(F) Floating Ball, Lever Operated,
DB6117L
Double Block and Flanged RF Note 3,
1/2 2 1500# Body:A105N, Ball: SS316,PEEK,
Bleed Valve (3.2-6.3 m) 6
Floating Ball, Lever Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type.
3) Use for sample connection.
4) Use for interface with instruments.
5) To be used only when “dissimilar check valves” is specified in P&IDs.
6) Use for chemical injection.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151440XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1 4 Sch.XXS
ASTM A106 Gr. B, Seamless,
Pipe 6 8 Sch.160 BE
ASME B36.10M
10 20 Sch.140
Thickness
ASTM A234 Gr. WPB, Seamless,
Cap 1 20 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
45 Elbow 1 20 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
90 Elbow 1 20 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Equal 1 20 Same As BW
ASME B16.9
Pipe
1 1/2 1 Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Reducing X X Same As BW
ASME B16.9
20 18 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Concentric ASME B16.9
20 18 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Eccentric ASME B16.9
20 18 Pipe
ASTM A106 Gr. B, Seamless,
Nipple 1 1 1/2 Sch.XXS BBE
ASME B36.10M, L=100mm
Thickness
Weldolet 1 6 Same As BW ASTM A105N, MSS SP 97 Note 2
Pipe
1500# /
Thickness RF / ASTM A105N, MFG. STD., Flanged
Flangeolet 1 2 Note 2
Same As 3.2-6.3 m end as per ASME B16.5
Pipe
ASTM A105, Seamless, L=450mm
Flanged (One flanged end
Ends RTJ- 1.6 m to suit API 5000 Type
Transition Piece 4 1/16 x 6 Sch. 160 Note 9
(4 1/16-RTJ 6B 4 1/16” flange and other flanged
and 6-RF) end RF-3.2-6.3 m to suit 6” ASME
Cl.1500 Flange)
1500# /
Thickness RF /
WN Flange 1 20 ASTM A105N, ASME B16.5
Same As 3.2-6.3 m
Pipe
RF /
Blind Flange 1 20 1500# ASTM A105N, ASME B16.5
3.2-6.3 m
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151440XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1500# /
Thickness
RF /
Orifice Flange 1 20 Same As ASTM A105N, ASME B16.36
3.2-6.3 m
Pipe
API 5000 /
Thickness RTJ /
WN Flange 4 1/16 4 1/16 ASTM A105N, API 6A Type 6B Note 5
Same As 1.6 m
Pipe
RF /
Spectacle Blind 1 6 1500# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 20 1500# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316L Winding, SS 316L Inner
Gasket 1 20 1500# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Octagonal Ring Type, Soft Iron,
Gasket 4 1/16 4 1/16 API 5000 - Max. Hardness 90 BHN, API 6A Note 5
Type 6B
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1 20 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF611JLNX
Body:A105N, Ball: 13%CR, PEEK,
1 1 1/2 1500# Note 1,4
Floating Ball, ISO 17292, Lever
Operated,
BF612JLNX
Body:A216 Gr. WCB, Ball: 13%CR,
2 3 1500# Note 1,4
PEEK, Trunnion Mounted, API 6D,
Lever Operated.,
Flanged RF
Ball Valve (FB) BF612JGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: 13%CR
4 8 1500# Note 1,4
PEEK, Trunnion Mounted, API 6D,
Gear Operated.,
BF612TGNX
Body:A216 Gr. WCB, Ball: CS +
10 20 1500# 3mm 13%CR Weld Overlay, PEEK, Note 1,4
Trunnion Mounted, API 6D, Gear
Operated.,
BR611JLNX
Flanged RF Body:A105N, Ball: 13%CR, PEEK,
Ball Valve (RB) 1 1 1/2 1500# Note 4
/ 3.2-6.3 m Floating Ball, ISO 17292, Lever
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151440XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR612JLNX
Body:A216 Gr. WCB, Ball: 13%CR,
2 3 1500# Note 4
PEEK, Trunnion Mounted, API 6D,
Lever Operated.,
BR612JGNX
Body:A216 Gr. WCB, Ball: 13%CR,
4 8 1500# Note 4
PEEK, Trunnion Mounted, API 6D,
Gear Operated.,
Flanged RF
Ball Valve (RB) BR612TGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: CS +
10 20 1500# 3mm 13%CR Weld Overlay, PEEK, Note 4
Trunnion Mounted, API 6D, Gear
Operated.,
GA611FHNX
Body:A105N, Wedge:13%CR +
1 1 1/2 1500# Note 4
Stellite 6, API 602, Handwheel
Operated,
GA612FHNX
Body:A216 Gr. WCB, Wedge:
2 3 1500# Note 4
13%CR + Stellite 6, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA612FGNX
Body:A216 Gr. WCB, Wedge:
4 8 1500# Note 4
13%CR + Stellite 6, API 600, Gear
Operated,
GA612GGNX
Body:A216 Gr. WCB, Wedge: CS +
10 20 1500# Note 4
3mm 13%CR Weld Overlay, API
600, Gear Operated,
GL611FHNX
Body:A105N, Disc: 13%CR +
1 1 1/2 1500# Note 4
Stellite 6, ISO 15761, Handwheel
Operated,
GL612FHNX
Flanged RF Body:A216 Gr. WCB, Disc: 13%CR
Globe Valve 2 3 1500# Note 4
/ 3.2-6.3 m + Stellite 6, BS 1873, Handwheel
Operated,
GL612FGNX
Body:A216 Gr. WCB, Disc: 13%CR
4 8 1500# Note 4
+ Stellite 6, BS 1873, Gear
Operated,
NE611FHNX
Flanged RF Body:A105N, Disc: 13%CR +
Needle Valve 1 1 1/2 1500# Note 4,6
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151440XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CP611FANX
Flanged RF
Check Valve 1 1 1/2 1500# Piston Lift Type, Body:A105N, Disc: Note 4
/ 3.2-6.3 m
13%CR + Stellite 6, ISO 15761,
CW692FANX
Dual Plate Wafer Lug Type, Body:
2 8 1500# Note 4
A216 Gr. WCB, Disc: 13%CR +
Stellite 6, API 594 Type A,
Wafer Lug /
Check Valve CW692GANX
3.2-6.3 m
Dual Plate Wafer Lug Type, Body:
10 20 1500# A216 Gr. WCB, Disc: CS + 3mm Note 4
13%CR Weld Overlay, API 594
Type A,
Flanged RF DB671JLNX
1 2 1500# (3.2-6.3 m) Body:A105N, Ball: 13%CR, PEEK, Note 4,7
Double Block and x NPT(F) Floating Ball, Lever Operated,
Bleed Valve FS
Flanged RF
1 2 1500# Body:A105N, Ball: 13%CR, PEEK, Note 4,8
/ 3.2-6.3 m
Floating Ball, Lever Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type.
3) All material shall be suitable for use in sour environment and shall be certified to NACE MR 0175 / ISO 15156
Latest Edition.
4) C.A. = 6mm shall be considered in thickness calculation for carbon steel parts in contact with fluid.
5) Use only at interface with API 5000 flanges at wellhead.
6) Use for sample connection.
7) Use for interface with instruments.
8) Use for chemical injection lines.
9) Use only at well heads to connect API flange and ASME pipe.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151441XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1 4 Sch.XXS
ASTM A106 Gr. B, Seamless,
Pipe 6 8 Sch.160 BE
ASME B36.10M
10 20 Sch.140
Thickness
ASTM A234 Gr. WPB, Seamless,
Cap 1 20 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
45 Elbow 1 20 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
90 Elbow 1 20 Same As BW
L.R., ASME B16.9
Pipe
Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Equal 1 20 Same As BW
ASME B16.9
Pipe
1 1/2 1 Thickness
ASTM A234 Gr. WPB, Seamless,
Tee Reducing X X Same As BW
ASME B16.9
20 18 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Concentric ASME B16.9
20 18 Pipe
1 1/2 1 Thickness
Reducer ASTM A234 Gr. WPB, Seamless,
X X Same As BW
Eccentric ASME B16.9
20 18 Pipe
ASTM A106 Gr. B, Seamless,
Nipple 1 1 1/2 Sch.XXS BBE
ASME B36.10M, L=100mm
Thickness
Weldolet 1 6 Same As BW ASTM A105N, MSS SP 97 Note 2
Pipe
1500# /
Thickness RF / ASTM A105N, MFG. STD., Flanged
Flangeolet 1 2 Note 2
Same As 3.2-6.3 m end as per ASME B16.5
Pipe
ASTM A106 Gr. B, Seamless,
Flanged L=450mm (One flanged end
Ends
Transition Piece 4 1/16 x 6 Sch. 160 RTJ- 1.6 m to suit API 5000 Note 9
(4 1/16-RTJ
4 1/16” flange and other flanged end
and 6-RF)
RF-3.2-6.3 m to suit 6” ASME pipe)
1500# /
Thickness RF /
WN Flange 1 20 ASTM A105N, ASME B16.5
Same As 3.2-6.3 m
Pipe
RF /
Blind Flange 1 20 1500# ASTM A105N, ASME B16.5
3.2-6.3 m
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151441XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
1500# /
Thickness
RF /
Orifice Flange 1 20 Same As ASTM A105N, ASME B16.36
3.2-6.3 m
Pipe
API 5000 /
Thickness RTJ /
WN Flange 4 1/16 4 1/16 ASTM A105N, API 6A Type 6B Note 5
Same As 1.6 m
Pipe
RF /
Spectacle Blind 1 6 1500# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 8 20 1500# ASTM A516 Gr. 70, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316L Winding, SS 316L Inner
Gasket 1 20 1500# -
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Octagonal Ring Type, Soft Iron,
Gasket 4 1/16 4 1/16 API 5000 - Max. Hardness 90 BHN, API 6A Note 5
Type 6B
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A193 Gr.
Stud Bolt / Nut 1 20 All - B7M / A194 Gr. 2HM, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
BF611BLNX
Body:A105N, Ball: Inconel 625,
1 1 1/2 1500# Note 1,4
PEEK, Floating Ball, ISO 17292,
Lever Operated,
BF612BLNX
Body:A216 Gr. WCB, Ball: Inconel
2 3 1500# Note 1,4
625, PEEK, Trunnion Mounted, API
6D, Lever Operated.,
Flanged RF
Ball Valve (FB) BF612BGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: Inconel
4 8 1500# Note 1,4
625 PEEK, Trunnion Mounted, API
6D, Gear Operated.,
BF612WGNX
Body:A216 Gr. WCB, Ball: CS +
10 20 1500# 3mm Inconel 625 Weld Overlay, Note 1,4
PEEK, Trunnion Mounted, API 6D,
Gear Operated.,
BR611BLNX
Flanged RF Body:A105N, Ball: Inconel 625,
Ball Valve (RB) 1 1 1/2 1500# Note 4
/ 3.2-6.3 m PEEK, Floating Ball, ISO 17292,
Lever Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151441XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BR612BLNX
Body:A216 Gr. WCB, Ball: Inconel
2 3 1500# Note 4
625, PEEK, Trunnion Mounted, API
6D, Lever Operated.,
BR612BGNX
Body:A216 Gr. WCB, Ball: Inconel
4 8 1500# Note 4
625, PEEK, Trunnion Mounted, API
6D, Gear Operated.,
Flanged RF
Ball Valve (RB) BR612WGNX
/ 3.2-6.3 m
Body:A216 Gr. WCB, Ball: CS +
10 20 1500# 3mm Inconel 625 Weld Overlay, Note 4
PEEK, Trunnion Mounted, API 6D,
Gear Operated.,
GA611AHNX
Body:A105N, Wedge:Inconel 625 +
1 1 1/2 1500# Note 4
Stellite 6, API 602, Handwheel
Operated,
GA612AHNX
Body:A216 Gr. WCB, Wedge:
2 3 1500# Note 4
Inconel 625 + Stellite 6, API 600,
Flanged RF Handwheel Operated,
Gate Valve
/ 3.2-6.3 m GA612AGNX
Body:A216 Gr. WCB, Wedge:
4 8 1500# Note 4
Inconel 625 + Stellite 6, API 600,
Gear Operated,
GA612EGNX
Body:A216 Gr. WCB, Wedge: CS +
10 20 1500# Note 4
3mm Inconel 625 Weld Overlay,
API 600, Gear Operated,
GL611AHNX
Body:A105N, Disc: Inconel 625 +
1 1 1/2 1500# Note 4
Stellite 6, ISO 15761, Handwheel
Operated,
GL612AHNX
Flanged RF Body:A216 Gr. WCB, Disc: Inconel
Globe Valve 2 3 1500# Note 4
/ 3.2-6.3 m 625 + Stellite 6, BS 1873,
Handwheel Operated,
GL612AGNX
Body:A216 Gr. WCB, Disc: Inconel
4 8 1500# Note 4
625 + Stellite 6, BS 1873, Gear
Operated,
NE611AHNX
Flanged RF Body:A105N, Disc: Inconel 625 +
Needle Valve 1 1 1/2 1500# Note 4,6
/ 3.2-6.3 m Stellite 6, ISO 15761, Handwheel
Operated,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 151441XG
Service FS Corrosion Allowance 6 mm
Rating/Facing 1500 # / RF Material C.S. NACE (Note 3)
Temperature ºC -29 38 50 100 150
Pressure Bar g 162.0 162.0 162.0 162.0 162.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
CP611AANX
Flanged RF
Check Valve 1 1 1/2 1500# Piston Lift Type, Body:A105N, Disc: Note 4
/ 3.2-6.3 m
Inconel 625 + Stellite 6, ISO 15761,
CW692AANX
Dual Plate Wafer Lug Type, Body:
2 8 1500# Note 4
A216 Gr. WCB, Disc: Inconel 625 +
Stellite 6, API 594 Type A,
Wafer Lug /
Check Valve CW692EANX
3.2-6.3 m
Dual Plate Wafer Lug Type, Body:
10 20 1500# A216 Gr. WCB, Disc: CS + 3mm Note 4
Inconel 625 Weld Overlay, API 594
Type A,
DB671BLNX
Flanged RF
Body:A105N, Ball: Inconel 625,
1 2 1500# (3.2-6.3 m) Note 4,7
PEEK, Floating Ball, Lever
x NPT(F)
Double Block and Operated,
Bleed Valve DB611BLNX
Flanged RF Body:A105N, Ball: Inconel 625,
1 2 1500# Note 4,8
/ 3.2-6.3 m PEEK, Floating Ball, Lever
Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type.
3) All material shall be suitable for use in sour environment and shall be certified to NACE MR 0175 / ISO 15156
Latest Edition.
4) C.A. = 6mm shall be considered in thickness calculation for carbon steel parts in contact with fluid.
5) Use only at interface with API 5000 flanges at wellhead.
6) Use for sample connection.
7) Use for interface with instruments.
8) Use for chemical injection lines.
9) Use only at well heads to connect API flange and ASME pipe.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 153411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 38 50 100 150
Pressure Bar g 248.2 248.2 240.6 211.0 192.5
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
ASTM A312 TP316/316L,
1/2 1 Sch.80S BE
Seamless, ASME B36.19M
Pipe
ASTM A312 TP316/316L,
1 1/2 3 Sch.160 BE
Seamless, ASME B36.19M
Thickness
ASTM A403 WP316/316L-S,
Cap 1/2 3 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S, L.R.,
45 Elbow 1/2 3 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S, L.R.,
90 Elbow 1/2 3 Same As BW
ASME B16.9
Pipe
Thickness
ASTM A403 WP316/316L-S,
Tee Equal 1/2 3 Same As BW
ASME B16.9
Pipe
3/4 1/2 Thickness
ASTM A403 WP316/316L-S,
Tee Reducing X X Same As BW
ASME B16.9
3 2 Pipe
3/4 1/2 Thickness
Reducer ASTM A403 WP316/316L-S,
X X Same As BW
Concentric ASME B16.9
3 2 Pipe
3/4 1/2 Thickness
Reducer ASTM A403 WP316/316L-S,
X X Same As BW
Eccentric ASME B16.9
3 2 Pipe
1/2 1 Sch.80S ASTM A312 TP 316/316L,
Nipple BBE Seamless, ASME B36.19M,
1 1/2 1 1/2 Sch.160 L=100mm
Thickness
ASTM A182 F316/316L, MSS SP
Weldolet 1/2 1 Same As BW Note 2
97
Pipe
1500# /
ASTM A182 F316/316L, MFG.
Thickness RF /
Flangeolet 1/2 2 STD., Flanged end as per ASME Note 2
Same As 3.2-6.3 m
B16.5
Pipe
1500# /
Thickness RF / ASTM A182 F316/316L, ASME
WN Flange 1/2 3
Same As 3.2-6.3 m B16.5
Pipe
RF /
Blind Flange 1/2 3 1500# ASTM A182 F316, ASME B16.5
3.2-6.3 m
1500# /
Thickness RF / ASTM A182 F316/316L, ASME
Orifice Flange 1 3
Same As 3.2-6.3 m B16.36
Pipe
RF /
Spectacle Blind 1/2 3 1500# ASTM A240-316, ASME B16.48
3.2-6.3 m
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 153411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 38 50 100 150
Pressure Bar g 248.2 248.2 240.6 211.0 192.5
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Spiral Wound, Graphite filled,
SS316 Winding, SS 316 Inner Ring
Gasket 1/2 3 1500# -
/ CS Centering Ring, ASME B16.20
Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A320 Gr.L7 /
Stud Bolt / Nut 1/2 3 All -
A194 Gr.7, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF6157L
Body:A182 F316/316L, Ball: SS316,
1/2 1 1/2 1500# Note 1
PEEK, Floating Ball, ISO 17292,
Flanged RF Lever Operated,
Ball Valve (FB)
/ 3.2-6.3 m BF6167L
Body:A351 CF8M, Ball: SS316,
2 3 1500# Note 1
PEEK, Trunnion Mounted, API 6D,
Lever Operated,
BR6157L
Body:A182 F316/316L, Ball: SS316,
1/2 1 1/2 1500#
PEEK, Floating Ball, ISO 17292,
Flanged RF Lever Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR6167L
Body:A351 CF8M, Ball: SS316,
2 3 1500#
PEEK, Trunnion Mounted, API 6D,
Lever Operated,
GL6154H
Body:A182 F316/316L, Disc:SS316
1/2 1 1/2 1500#
+ Stellite 6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL6164H
Body:A351 CF8M, Disc:SS316 +
2 3 1500#
Stellite 6, BS 1873, Handwheel
Operated,
NE6154H
Flanged RF Body:A182 F316/316L, Disc:SS316
Needle Valve 1/2 1 1/2 1500# Note 3
/ 3.2-6.3 m + Stellite 6, ISO 15761, Handwheel
Operated,
CP6154A
Flanged RF Piston Lift Type, Body:A182
1/2 1 1/2 1500#
/ 3.2-6.3 m F316/316L, Disc:SS316 + Stellite 6,
ISO 15761,
Check Valve
CW6964A
Wafer Lug / Dual Plate Wafer Lug Type,
2 3 1500#
3.2-6.3 m Body:A351 CF8M, Disc:SS316 +
Stellite 6, API 594 Type A,
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 153411XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material S.S. DUAL CERTIFIED
Temperature ºC -29 38 50 100 150
Pressure Bar g 248.2 248.2 240.6 211.0 192.5
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
DB6757L
Flanged RF
Body:A182 F316/316L, Ball: SS316,
1/2 2 1500# (3.2-6.3 m) Note 4
PEEK, Floating Ball, Lever
x NPT(F)
Double Block and Operated,
Bleed Valve DB6157L
Flanged RF Body:A182 F316/316L, Ball: SS316, Note 4,
1/2 2 1500#
(3.2-6.3 m) PEEK, Floating Ball, Lever 5
Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type
3) Use for sample connection.
4) Use for interface with instruments
5) Use for chemical injection lines.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 153811XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material Duplex SS (S31803)
Temperature ºC -29 38 50 100 150
Pressure Bar g 159.0 159.0 159.0 159.0 159.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
ASTM A790 UNS S31803,
1/2 1 Sch.80S BE
Seamless, ASME B36.19M
Pipe
ASTM A790 UNS S31803,
1 1/2 3 Sch.40S BE
Seamless, ASME B36.19M
Thickness
ASTM A815 UNS S31803 Class
Cap 1/2 3 Same As BW
WP-S, ASME B16.9
Pipe
Thickness
ASTM A815 UNS S31803 Class
45 Elbow 1/2 3 Same As BW
WP-S, L.R., ASME B16.9
Pipe
Thickness
ASTM A815 UNS S31803 Class
90 Elbow 1/2 3 Same As BW
WP-S, L.R., ASME B16.9
Pipe
Thickness
ASTM A815 UNS S31803 Class
Tee Equal 1/2 3 Same As BW
WP-S, ASME B16.9
Pipe
3/4 1/2 Thickness
ASTM A815 UNS S31803 Class
Tee Reducing X X Same As BW
WP-S, ASME B16.9
3 2 Pipe
3/4 1/2 Thickness
Reducer ASTM A815 UNS S31803 Class
X X Same As BW
Concentric WP-S, ASME B16.9
3 2 Pipe
3/4 1/2 Thickness
Reducer ASTM A815 UNS S31803 Class
X X Same As BW
Eccentric WP-S, ASME B16.9
3 2 Pipe
1/2 1 Sch.80S ASTM A790 UNS S31803,
Nipple BBE Seamless, ASME B36.19M,
1 1/2 1 1/2 Sch.40S L=100mm
Thickness
Weldolet 1/2 1 Same As BW ASTM A182 F51, MSS SP 97 Note 2
Pipe
1500# /
Thickness RF / ASTM A182 F51, MFG. STD.,
Flangeolet 1/2 2 Note 2
Same As 3.2-6.3 m Flanged end as per ASME B16.5
Pipe
1500# /
Thickness RF /
WN Flange 1/2 3 ASTM A182 F51, ASME B16.5
Same As 3.2-6.3 m
Pipe
RF /
Blind Flange 1/2 3 1500# ASTM A182 F51, ASME B16.5
3.2-6.3 m
1500# /
Thickness RF /
Orifice Flange 1 3 ASTM A182 F51, ASME B16.36
Same As 3.2-6.3 m
Pipe
RF /
Spectacle Blind 1/2 3 1500# ASTM A240-S31803, ASME B16.48
3.2-6.3 m
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 153811XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material Duplex SS (S31803)
Temperature ºC -29 38 50 100 150
Pressure Bar g 159.0 159.0 159.0 159.0 159.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
Spiral Wound, Graphite filled, UNS
S31803 Winding, UNS S31803
Gasket 1/2 3 1500# -
Inner Ring / Centering Ring, ASME
B16.20 Thk.=4.5mm
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A320 Gr.L7 /
Stud Bolt / Nut 1/2 3 All -
A194 Gr.7, Zn Ni/Ceramic Metal
Coated + Fluorocarbon Coated
BF61APL
Body:A182 F51, Ball: UNS S31803,
1/2 1 1/2 1500# Note 1
PEEK, Floating Ball, ISO 17292,
Flanged RF Lever Operated,
Ball Valve (FB)
/ 3.2-6.3 m BF61BPL
Body:A890 Gr.4A Ball: UNS
2 3 1500# Note 1
S31803, PEEK, Trunnion Mounted,
API 6D, Lever Operated,
BR61APL
Body:A182 F51, Ball: UNS S31803,
1/2 1 1/2 1500#
PEEK, Floating Ball, ISO 17292,
Flanged RF Lever Operated,
Ball Valve (RB)
/ 3.2-6.3 m BR61BPL
Body:A890 Gr.4A Ball: UNS
2 3 1500#
S31803, PEEK, Trunnion Mounted,
API 6D, Lever Operated,
GL61AQH
Body:A182 F51, Disc:UNS S31803
1/2 1 1/2 1500#
+ Stellite 6, ISO 15761, Handwheel
Flanged RF Operated,
Globe Valve
/ 3.2-6.3 m GL61BQH
Body:A890 Gr.4A, Disc:UNS
2 3 1500#
S31803 + Stellite 6, BS 1873,
Handwheel Operated,
NE61AQH
Flanged RF Body:A182 F51, Disc:UNS S31803
Needle Valve 1/2 1 1/2 1500# Note 3
/ 3.2-6.3 m + Stellite 6, ISO 15761, Handwheel
Operated,
CP61AQA
Flanged RF Piston Lift Type, Body:A182 F51,
1/2 1 1/2 1500#
/ 3.2-6.3 m Disc:UNS S31803 + Stellite 6, ISO
15761,
Check Valve
CW69BQA
Wafer Lug / Dual Plate Wafer Lug Type,
2 3 1500#
3.2-6.3 m Body:A890 Gr.4A, Disc:UNS
S31803 + Stellite 6, API 594 Type A
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 153811XG
Service CI Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material Duplex SS (S31803)
Temperature ºC -29 38 50 100 150
Pressure Bar g 159.0 159.0 159.0 159.0 159.0
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
DB67APL
Flanged RF
Body:A182 F51, Ball: UNS S31803,
1/2 2 1500# (3.2-6.3 m) Note 4
PEEK, Floating Ball, Lever
x NPT(F)
Double Block and Operated,
Bleed Valve DB61APL
Flanged RF Body:A182 F51, Ball: UNS S31803, Note 4,
1/2 2 1500#
(3.2-6.3 m) PEEK, Floating Ball, Lever 5
Operated,
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type
3) Use for sample connection.
4) Use for interface with instruments
5) Use for chemical injection lines.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 156520XG
Service FS Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material INCONEL 625 (Note 5)
Temperature ºC -29 38 50 100 150
Pressure Bar g 258.6 258.6 258.6 257.6 250.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
ASTM B444 UNS N06625,
1 3 Sch.10S BE
Seamless, ASME B36.19M
Pipe
ASTM B444 UNS N06625,
4 8 Sch.40S BE
Seamless, ASME B36.19M
Thickness
ASTM B366 WPNCMC, L.R.,
45 Elbow 1 8 Same As BW
Seamless, ASME B16.9
Pipe
Thickness
ASTM B366 WPNCMC, L.R.,
90 Elbow 1 8 Same As BW
Seamless, ASME B16.9
Pipe
Thickness
Reducer ASTM B366 WPNCMC, Seamless,
8x6 Same As BW
Concentric ASME B16.9
Pipe
Thickness
ASTM B564 UNS N06625, MSS
Weldolet 1 2 Same As BW Note 2
SP-97
Pipe
1500# /
ASTM B564 UNS N06625, MFG.
Thickness RF /
Flangeolet 1 2 STD., Flanged end as per ASME Note 2
Same As 3.2-6.3 m
B16.5
Pipe
ASTM B444 UNS N06625,
15.5mm x Seamless, L=200MM (One end to
Transition Piece 5 1/8 x 6 BW Note 6
Sch.40S suit 5 1/8 API 5000 Type 6B flange
and other end to suit Pipe)
1500# /
Thickness RF / ASTM B564 UNS N06625, ASME
WN Flange 1 8
Same As 3.2-6.3 m B16.5
Pipe
API 5000 / RTJ / ASTM B564 UNS N06625, API 6A
WN Flange 5 1/8 5 1/8 Note 4
15.5mm 1.6 m Type 6B
RF / ASTM B564 UNS N06625, ASME
Blind Flange 1 8 1500#
3.2-6.3 m B16.5
RF / ASTM B443 UNS N06625, ASME
Spectacle Blind 1 6 1500#
3.2-6.3 m B16.48
Spiral Wound, Graphite filled,
Inconel 625 Winding, Inconel 625
Gasket 1 8 1500# -
Inner Ring / CS Centering Ring,
ASME B16.20, Thk.=4.5mm
Octagonal Ring Type, Inconel 625,
Gasket 5 1/8 5 1/8 API 5000 - Note 4
API 6A Type 6B
Bolt Full threaded, Heavy
Hexagonal Nut, ASTM A320
Stud Bolt / Nut 1 8 All - Gr.L7M / A194 Gr.7M, Zn
Ni/Ceramic Metal Coated +
Fluorocarbon Coated
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Class 156520XG
Service FS Corrosion Allowance 0 mm
Rating/Facing 1500 # / RF Material INCONEL 625 (Note 5)
Temperature ºC -29 38 50 100 150
Pressure Bar g 258.6 258.6 258.6 257.6 250.8
Inch Size Rating End / Face
Items Description Notes
From To Sch. /Thk. Finish
BF617BLN
Flanged RF Body:B564 UNS N06625, Ball:
1 1 1500# Note 1
Ball Valve (FB) / 3.2-6.3 m Inconel 625, PEEK, Floating Ball,
ISO 17292, Lever Operated,
BR617BLN
Flanged RF Body:B564 UNS N06625, Ball:
Ball Valve (RB) 1 1 1500#
/ 3.2-6.3 m Inconel 625, PEEK, Floating Ball,
ISO 17292, Lever Operated,
GL617AHN
Flanged RF Body:B564 UNS N06625, Disc:UNS
1 1 1500#
Globe Valve / 3.2-6.3 m N06625 + Stellite 6, ISO 15761,
Handwheel Operated,
DB677BLN
Flanged RF
Double Block and Body:B564 UNS N06625, Ball:
1 1/2 1 1/2 1500# (3.2-6.3 m) Note 3
Bleed Valve Inconel 625, PEEK, Floating Ball,
x NPT(F)
Lever Operated
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type
3) Use for interface with instruments.
4) Use only at interface with API 5000 flanges at wellhead.
5) All material shall be suitable for use in sour environment and shall be certified to NACE MR 0175 / ISO 15156
Latest Edition.
6) Use only at well heads to connect API flanges and pipes.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
APPENDIX-C
DETAILS OF PIPELINE CLASSES
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Notes:
1/2 1 Sch.XXS
1 1/2 2 Sch.160 ASTM A106 Gr. B, Seamless,
4 6 Sch.80 ASME B36.10M
8 10 Sch.60
ASTM A106 Gr. B, Seamless,
16 16 Sch.60 Note 9
ASME B36.10M
16 16 9.00mm API 5L GR.X65 PSL2, HFW
16 16 10.40mm API 5L GR.X65 PSL2, HFW Note 6
18 18 9.40mm API 5L GR.X65 PSL2, HFW
18 18 10.90mm API 5L GR.X65 PSL2, HFW Note 6
20 20 9.80mm API 5L GR.X65 PSL2, HFW
Pipe 20 20 11.40mm BE API 5L GR.X65 PSL2, HFW Note 6
ASTM A672 GR.C65 CL.22, EFW,
20 20 14.27mm 100% RADIOGRAPHY, ASME Note 10
B36.10M
22 22 10.10mm API 5L GR.X65 PSL2, HFW
22 22 12.00mm API 5L GR.X65 PSL2, HFW Note 6
24 24 10.5mm API 5L GR.X65 PSL2, HFW Note 11
24 24 12.4mm API 5L GR.X65 PSL2, HFW Note 11
24 24 17.48mm
26 26 17.48mm ASTM A672 GR.C65 CL.22, EFW,
100% RADIOGRAPHY, ASME
28 28 19.05mm B36.10M
30 30 19.05mm
Thickness
ASTM A234 Gr. WPB, Seamless,
1/2 10 Same As BW
ASME B16.9
Pipe
ASTM A860 WPHY65, Seamless,
16 16 Sch.60 BW Note 9
MSS SP-75
16 16 10.40mm
Cap ASTM A860 WPHY65, Seamless,
18 18 10.90mm BW Note 6
MSS SP-75
20 20 11.40mm
ASTM A860 WPHY65, Seamless,
20 20 14.27mm BW Note 10
MSS SP-75
22 22 10.10mm ASTM A860 WPHY65, Seamless,
BW
22 22 12.00mm MSS SP-75 Note 6
API 5L GR.X65, HFW, R = 6D, ISO
16 16 Sch.60 BW Note 9
15590-1
Hot Induction 16 16 10.40mm
Bend 45º API 5L GR.X65, HFW, R = 6D, ISO
18 18 10.90mm BW
15590-1
20 20 11.40mm
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
600# /
Thickness RF /
2 10 ASTM A105N, ASME B16.5 Note 8
Same As 3.2-6.3 m
WN Flange Pipe
600# /
RF / Note 6,
18 18 10.90mm ASTM A694 Gr.F65, ASME B16.5
3.2-6.3 m 8
Thick
600# /
RF / Note 6,
20 20 11.40mm ASTM A694 Gr.F65, ASME B16.5
3.2-6.3 m 8
Thick
WN Flange
600# /
RF / Note 8,
20 20 14.27mm ASTM A694 Gr.F65, ASME B16.5
3.2-6.3 m 10
Thick
1/2 10 ASTM A105N, ASME B16.5
16 18 ASTM A694 Gr.F65, ASME B16.5
RF /
Blind Flange 20 20 300# ASTM A694 Gr.F65, ASME B16.5
3.2-6.3 m
24 24 ASTM A694 Gr.F65, MSS SP 44
26 30 ASTM A694 Gr.F65, MSS SP 44
300# /
Thickness RF /
1 10 ASTM A105N, ASME B16.36
Same As 3.2-6.3 m
Pipe
Orifice Flange 300# / RF /
16 16 ASTM A694 Gr.F65, ASME B16.5 Note 9
Sch.60 3.2-6.3 m
300# /
RF /
16 16 10.40mm ASTM A694 Gr.F65, ASME B16.5 Note 6
3.2-6.3 m
Thick
300# /
RF /
Orifice Flange 18 18 10.90mm ASTM A694 Gr.F65, ASME B16.5 Note 6
3.2-6.3 m
Thick
RF /
Spectacle Blind 1/2 12 300# ASTM A516 Gr.65, ASME B16.48
3.2-6.3 m
RF /
Blind and Spacer 14 18 300# ASTM A516 Gr.65, ASME B16.48
3.2-6.3 m
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
1/2 20
Ring / CS Centering Ring, ASME
B16.20 Thk.=4.5mm
Gasket 300# -
Spiral Wound, Graphite filled,
SS316 Winding, SS 316L Inner
22 22
Ring / CS Centering Ring, MSS SP
44 Thk.=4.5mm
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Notes:
1) Use only when indicated on P&IDs.
2) See branch connection (Appendix-D) for branch connection type.
3) All material shall be suitable for use in sour environment and shall be certified to NACE MR0175 / ISO 15156
Latest edition.
4) C.A. = 6mm shall be considered in thickness calculation for carbon steel parts in contact with fluid.
5) Use for interface with instruments.
6) Pipeline thickness inside facilities and crossings.
7) To be installed on piggable pipeline.
8) Use for connection with Class 600 rating flanges / nozzles etc.
9) For Phase 1 and 2, 16” piping shall be of ASTM A106 Gr. B material of Sch.60. Fitting and Flanges shall match
the pipe wall thickness.
10) For Phase 1, 2 and 3, 20” piping shall be of ASTM A672 Gr.C65 Cl.22 material of 14.27mm thickness. Fitting
and Flanges shall match the pipe wall thickness.
11) For phase 4, piping shall be of API 5L X65 PSL2 material of 10.5/12.4 mm thickness. Fitting and Flanges shall
match the pipe wall thickness.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
APPENDIX-D
BRANCH TABLE
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
BRANCH TABLE
011412XG, 011432XG, 011440RG, 011440XG, 011441XG , 011440YG, 013411XG, 031440RG,
031440XG, 031441XG, 033411XG, 061440XG, 061441XG, 061440YG, 061441YG, 063411XG, 091440XG,
093411XG, 093811XG, 151432XG, 151440XG, 151441XG, 153411XG, 153811XG, 156520XG
0.5 T
0.75 RT T
1 RT RT T
1.5 RT RT RT T
2 W W RT RT T
3 W W W RT RT T
4 W W W W RT RT T
6 W W W W W RT RT T
8 W W W W W W RT RT T
10 W W W W W W RT RT RT T
12 W W W W W W W RT RT RT T
H
14 W W W W W W W RT RT RT RT T
E
16 W W W W W W W RT RT RT RT RT T
A 18 W W W W W W W W RT RT RT RT RT T
D 20 W W W W W W W W RT RT RT RT RT RT T
E 24 W W W W W W W W W RT RT RT RT RT RT T
R 26 W W W W W W W W W W RT RT RT RT RT RT T
28 W W W W W W W W W W RT RT RT RT RT RT RT T
30 W W W W W W W W W RT RT RT RT RT RT RT RT RT T
32 W W W W W W W W W W W RT RT RT RT RT RT RT R
T
34 W W W W W W W W W W W * RT RT RT RT RT RT R
T
36 W W W W W W W W W W W * RT RT RT RT RT RT R
T
38 W W W W W W W W W W W * * RT RT RT RT RT R
T
40 W W W W W W W W W W W * * RT RT RT RT RT R
T
42 W W W W W W W W W W W * RT RT RT RT RT RT R
T
44 W W W W W W W W W W W * * * RT RT RT RT R
T
46 W W W W W W W W W W W * * * * RT RT RT R
T
48 W W W W W W W W W W W * * * * RT RT RT R
T
0.5 0.75 1 1.5 2 3 4 6 8 10 12 14 16 18 20 24 26 28 30
BRANCH
T EQUAL TEE
RT REDUCING TEE
W WELDOLET
* PIPE TO PIPE OR REINFORCED PAD
BRANCH TABLE
011412XG, 011432XG, 011440RG, 011440XG, 011441XG , 011440YG, 013411XG, 031440RG,
031440XG, 031441XG, 033411XG, 061440XG, 061441XG, 061440YG, 061441YG, 063411XG, 091440XG,
093411XG, 093811XG, 151432XG, 151440XG, 151441XG, 153411XG, 153811XG, 156520XG
32 T
H 34 RT T
E 36 RT RT T
A 38 RT RT RT T
D 40 RT RT RT RT T
42 RT RT RT RT RT T
E
44 RT RT RT RT RT RT T
R
46 RT RT RT RT RT RT RT T
48 RT RT RT RT RT RT RT RT T
32 34 36 38 40 42 44 46 48
BRANCH
T EQUAL TEE
RT REDUCING TEE
W WELDOLET
* PIPE TO PIPE OR REINFORCED PAD
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
BRANCH TABLE
018011XG
0.5 T
0.75 RT T
H
1 RT RT T
E
A 1.5 RT RT RT T
D 2 RT RT RT RT T
E
3 TH TH TH TH TH T
R
4 TH TH TH TH TH RT T
6 TH TH TH TH TH RT RT T
BRANCH
T EQUAL TEE
RT REDUCING TEE
TH THREADOLET
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
APPENDIX-E
BOLT LENGTH TABLE
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
Notes:
1) Bolt length for orifice flange shall be referred to 300# rating bolt length.
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
APPENDIX-F
MATERIAL OF CONSTRUCTION FOR VALVES
EPCC OF OIL GATHERING FACILITIES (PHASE 4)
SPECIFIC NOTES:
2.1 All materials shall conform to NACE MR0175/ISO 15156 latest edition.
2.2 Seat housing shall be protected with weld overlay with material similar to trim.
2.3 All ball valves in wet sour service shall have the following extra requirements:
2.3.1 The upper and lower trunnion bearings shall be of SS 316 with RPTFE coated material as minimum.
2.3.2 Trunnion bearing protection by gasket O-ring allocated in bearing retainer.
2.3.3 Valve shall be provided with sealant injection featuring grease injection