Corrosion allowance for piping classes is 6 mm, so spacer and spade thickness must be increased accordingly. A 12" pipe has a wall thickness of Schedule 120 (25.4mm) and spacer inside diameter must match the 12" inside diameter. Materials must meet standards of NACE MR 0175/ISO 15156.
Original Description:
Original Title
Drawing for Item 194 SPADE&SPACER rev 1 (3) (1)
Corrosion allowance for piping classes is 6 mm, so spacer and spade thickness must be increased accordingly. A 12" pipe has a wall thickness of Schedule 120 (25.4mm) and spacer inside diameter must match the 12" inside diameter. Materials must meet standards of NACE MR 0175/ISO 15156.
Corrosion allowance for piping classes is 6 mm, so spacer and spade thickness must be increased accordingly. A 12" pipe has a wall thickness of Schedule 120 (25.4mm) and spacer inside diameter must match the 12" inside diameter. Materials must meet standards of NACE MR 0175/ISO 15156.
shall be increased accordingly based on 6mm corrosion allowance. 12" pipe wall thickness is Schedule 120 (25.4mm), Spacer ID shall be in accordance with 12" ID Materials shall be in accordance with NACE MR 0175/ ISO 15156