Professional Documents
Culture Documents
لدي مشكلة مماثلة الآن مع cb534d لا يتحرك للأمام أو للخلف. فعلت معايرة المقبض مع
لدي مشكلة مماثلة الآن مع cb534d لا يتحرك للأمام أو للخلف. فعلت معايرة المقبض مع
دان ،فني
العمالء الراضون15458 :
.خريج WyoTechالخبرة +17 :سنة .متجر وخبرة ميدانية مع جميع العالمات التجارية الكبرى للمعدات الثقيلة والشاحنات 1995 -
مرحًبا ،اسمي ***** سيسعدني تقديم المساعدة .يمكننا المتابعة حسب الحاجة هنا ،امنحني بعض الوقت لمراجعة معلوماتك ومتابعة
ردودي .المحترفون ليسوا موظفين في الموقع ولكنهم يساعدون هنا كلما سمح الوقت بالوقت بين الوظائف واألسرة وما إلى ذلك .سيختلف
.وقت االستجابة اعتماًد ا على عبء عملي ،وما إلى ذلك .منفصل ،للحالة ،إلخ
"5-2 "CP_Neutral_Flt
"راجع إجراء نظام التشخيص " ،مفتاح القرب للتحكم بالدفع -اختبار
المؤشرات المحايدة لمستشعر المقبض وال يوافق )فقط CB-534Dو : (CB-434Dخطأ محايد )فقط CB-534Dو (CB-434D
.مستشعر القرب .مفتاح القرب المعدل بشكل صحيح .اتصال خاطئ .مستشعر موضع المقبض الخاطئ .مستشعر القرب الخاطئ
"5-2 "CP_Neutral_Flt
"راجع إجراء نظام التشخيص " ،الملف اللولبي لتغيير الدفع -اختبار
فقط الدائرة IRHو . CB-564Dصمام السرعة :اإلخراج مفتوح أو قصير بالنسبة للبطارية /األرضية )فقط IRHو (CB-564D
.المفتوحة .قصير إلى البطارية أو األرض .ملف معيب .اتصال ضعيف
عميلرد
انا فعال اقدر مساعدتك .اآلن أنا في مكان اآللة في موقع العمل .أنا الشخص الوحيد الذي يمكنه التحدث باللغة اإلنجليزية إلى حد ما ،وآمل
أن تساعدني الشاحنة حًقا قبل مغادرة الموقع .مرة أخرى سوف أقدر مساعدتك .شكًر ا
هل تعرف كيفية ضبط مفتاح القرب؟ أو ما هو نوع االختبار الذي يجب علي إجراؤه؟ شكًر ا
دانفني
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
رمز السقوط هذا هو لخطأ الموضع المحايد .ومع ذلك ،ال يوجد دليل الستكشاف األخطاء وإصالحها للخطأ المحايد في الكتيبات .سوف
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 1/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
يوجد هذا القرص. يجب تدوير مقياس الجهد للتحكم في السرعة المتغيرة بالكامل في اتجاه عقارب الساعة، عند تنفيذ هذا اإلجراء:مالحظة
على لوحة العدادات في األجهزة المزودة بهذه الميزة.
قد تكون اآللة عالقة في الدفع األمامي أو قد ال تتحرك لألمام.يمكن أن تفشل وظيفة الدفع األمامي بطريقتين.
نتائج:
2 انتقل إلى اختبار الخطوة. اآللة عالقة في الوضع األمامي- عالق في األمام.
5 تابع لالختبار الخطوة. لن تتحرك الماكينة لألمام- ممنوع السفر إلى األمام.
تحقق من مستشعر موضع عصا الفرح.2 اختبر الخطوة.
7 أدخل مسبار، في الجزء الخلفي من موصل تسخير المستشعرX-1710 Multimeter Probe على طول سلك اإلشارة (جهة االتصال
)3.
7 أدخل مسبار، في الجزء الخلفي من موصل تسخير المستشعرX-1710 )2 متعدد المتر على طول السلك األرضي (التالمس.
Move the joystick to the NEUTRAL position. Check the signal. The signal should be operating at a
50% duty cycle.
The value for the duty cycle starts at 50% in the center position and then the signal rises above
50% as the joystick is moved forward.
Results:
OK - The value for the duty cycle starts at 50% in the center position and then the signal rises
above 50% as the joystick is moved forward. The joystick position sensor is operating normally.
Proceed to Test Step 3.
NOT OK - The value for the duty cycle starts above 50% in the center position and then the signal
remains above 50% as the joystick is moved forward. The signal from the jostick is incorrect.
Repair: Re-check the operation of the joystick and replace the joystick if the problem remains. 1
Stop. مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 2/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
Test Step 3. CHECK THE CIRCUIT FROM THE ECM TO THE FORWARD PROPEL SOLENOID.
Turn the key start switch and the disconnect switch to the OFF position.
At the ECM connector, remove the K725-GN wire from socket 35.
Turn the key start switch and the disconnect switch to the ON position.
Start the machine to check for forward movement. Then, turn off the engine.
Expected Result:
Results:
Stop.
NOT OK - The machine moves forward. The circuit from the ECM to the solenoid may be shorted
to +battery. Proceed to Test Step 4
Test Step 4. CHECK THE SOLENOID CIRCUIT FOR A SHORT TO +BATTERY.
The key start switch and the disconnect remain in the ON position.
At the wire that was removed from the ECM connector (K725-GN), measure the voltage from the
wire to frame ground.
Expected Result:
No voltage is present.
Results:
OK - No voltage is present.
Repair: No voltage is present but the machine still travels forward when the engine is started. The
solenoid may have failed. Replace the solenoid and resume normal machine operation. If a new
solenoid does not solve the problem, check the pump.
Stop.
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 3/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
Results:
YES - The lamp for the brakes turns OFF. The machine still does not move forward. Proceed to
Test Step 6.
Stop.
The disconnect and the key start switch remain in the ON position.
At the brake release solenoid, measure the voltage from contact 1 to contact 2.
Expected Result:
Results:
NOT OK - The voltage is less than 12 DCV. There is a problem with the brake system.
Repair: Troubleshoot the brake system. The brake system includes the following components:
brake switch, neutral start relay number 1, neutral start relay number 2, brake release latching
relay, brake release relay and brake release solenoid. See the schematic at the beginning of this
procedure.
Stop.
At the back of the harness connector for the ECM, insert the probe of the 7X-1710 Multimeter
1
Probe along the signal wire (contact 15).
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 4/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
At the back of the harness connector for the ECM, insert the other 7X-1710 Multimeter Probe
along the ground wire (contact 2).
Turn the disconnect switch and the key start switch to the ON position.
Move the joystick to the NEUTRAL position. Check the signal. The signal should be operating at a
50% duty cycle at 500 Hz.
The value for the duty cycle starts at 50% in the center position and then the signal rises above
50% as the joystick is moved forward. The frequency is constant at 500 Hz.
Results:
OK - The value for the duty cycle starts at 50% in the center position and then the signal rises
above 50% as the joystick is moved forward. The frequency is 500 Hz. The joystick position
sensor is operating normally. Proceed to Test Step 10.
NOT OK - The value for the duty cycle is incorrect or the frequency is not be 500 Hz. The signal
from the jostick is incorrect. Proceed to Test Step 8.
Test Step 8. CHECK FOR POWER AND GROUND AT THE JOYSTICK.
The disconnect switch and the key start switch remain in the ON position.
At the back of the harness connector for the joystick, insert the probe of the 7X-1710 Multimeter
Probe along the power wire 135-BU (contact 1).
At the back of the harness connector for the joystick, insert the probe of the 7X-1710 Multimeter
Probe along the ground wire 200-BK (contact 2).
Results:
Stop. 1
البناء الخاصة بك؟
Test Step 9. CHECK THE JOYSTICK POSITION مرحبًا! كيف يمكنني المساعدة في سؤال معدات
SENSOR.
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 5/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
At the back of the harness connector for the joystick, insert the probe of the 7X-1710 Multimeter
Probe along the signal wire (contact 3).
At the back of the harness connector for the joystick, insert the other 7X-1710 Multimeter Probe
along the ground wire (contact 2).
Move the joystick to the NEUTRAL position. Check the signal. The signal should be operating at a
50% duty cycle at 500 Hz.
The value for the duty cycle starts at 50% in the center position and then the signal rises above
50% as the joystick is moved forward. The frequency is constant at 500 Hz.
Results:
OK - The value for the duty cycle starts at 50% in the center position and then the signal rises
above 50% as the joystick is moved forward. The frequency is 500 Hz. The joystick position
sensor is operating normally.
Repair: The signal wire is open between the joystick and the ECM. Repair the wiring harness or
replace the wiring harness.
Stop.
NOT OK - The value for the duty cycle is incorrect or the frequency is not be 500 Hz. The signal
from the jostick is incorrect.
Repair: The joystick may have failed. Recheck the joystick and replace the joystick if the problem
remains.
Stop.
Turn the key start switch and the disconnect switch to the OFF position.
Results:
YES - The resistance is less than 5 ohms. The ground circuit is good. Proceed to Test Step 11.
1
NO - The resistance is over 5 ohms. The بك؟resistance
البناء الخاصةisمعدات
excessive.
مرحبًا! كيف يمكنني المساعدة في سؤال
Repair: The ground circuit has failed. Repair the ground circuit.
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 6/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
Stop.
The key start switch and disconnect switch remain in the ON position.
At the back of the harness connector for the solenoid, remove the signal wire K725-GN.
At the solenoid, connect one lead from the multimeter to contact 3. Connect the other lead from
the multimeter to the removed wire K725-GN.
Start the machine and move the propel lever to the forward position.
The current is 0 mA is neutral and rises to 1200 mA as the lever is moved forward.
Results:
OK - The current is 0 mA in neutral and rises to 1200 mA as the lever is moved forward. The
proper current is reaching the solenoid. Proceed to Test Step 13.
NOT OK - The current is 0 mA is neutral and does not rise as the lever is moved forward. The
proper signal is not reaching the solenoid. Proceed to Test Step 12.
Test Step 12. CHECK FOR AN OPEN CIRCUIT.
Turn the key start switch and disconnect switch to the OFF position.
At the harness connector for the ECM, connect one lead from the multimeter contact 36 (wire
K725-GN).
At the propel control solenoid, disconnect the 4 pin connector and connect the other lead from the
multimeter to wire K725-GN.
Results:
OK - The resistance is less than 5 ohms. The circuit is not open. The ECM is not sending the
proper signal to the solenoid.
Repair: The ECM may have failed. Ensure that the brake circuit is correct and the signal for brake
release is reaching the ECM. If the problem remains, contact the Technical Communicator at the 1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 7/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
dealership for possible consultation with Caterpillar. This consultation may greatly reduce repair
time.
Stop.
NOT OK - The resistance is over 5000 ohms. The circuit is open between the ECM and the
solenoid.
Repair: Repair the wiring harness or replace the wiring harness.
Stop.
Expected Result:
Results:
Stop.
Stop.
عميلرد
Ok let me read it carefully. Is there a way to move it to load it to the lowboy. Like a bypass or
something?
DANفني
Click below for a schematic also to help... Ill see if there are any tow bypass valves... let me see
Service information
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
DANفني
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 8/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
عميلرد
Dan solved problem the issue was on a silly Billy bolt that almost makes contact to a sensor on
neutral. Moved it a bit closer and it worked. Thanks any ways for all your help.
DANفني
Thanks for the update and glad to hear you got this resolved. It's been a pleasure working with
you on this.
Please take a moment to rate my answers as that is how the site credits my time helping on the
site or let me know if you need more help. 5 star ratings and bonuses are always greatly
appreciated.
عميلرد
Hi Dan so I got some updates. The machine was able to load on the lowboy. But I notice a few
times in which the machine was moving forward or backwards and as soon as I started to play
with the potentiometer and the switch beside it the machine showed the error again 52. I just turn
the machine off then back on and started working fine again. This was until we tried to load it,
when the front roller hit the lowboy ramp and the machine didn't have the enough push or power to
over pass the small ramp, the machine stopped again and needed to be reset (turn off and on) so
it could start moving again. Next time I took some distance and speed so the roller could go over
the ramp with enough momentum. So the main question is why do you think it comes a time in
which the machine lacks of power for any reason may be a bump on the way or the lowboy ramp
and not been able to pass over it the machine protects it self won't move back or fwd with code 52
flashing until its reset. Any help its gladly appreciated
دانفني
1
If it was still trying to travel up the ramps but you had no power in the engine rpm's remained
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
consistent than it sounds more like either a hydraulic pump or drive motor problem or the circuit
going over relief prematurely. I would take a look in your hydraulic filter for fine metal debris that
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 9/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
would look like glitter in the oil and filter which would indicate a pump or component failure. Also if
you can prevent movement you can disconnect the case drain hose from the drive motor and put
a hydraulic plug on the hose then run a hose from the case drain into an empty bucket. Slowly
engaged drive with travel prevented and monitor the case drain as it should come out in low-
volume. If it comes out under high pressure or volume your drive motor is bad. I'll check and see if
I can find anything else about a self protection function but off the top of my head I'm not aware of
one.
نعم ال
كيف يعملJustAnswer
وصف مشكلتك
سيرشدك المساعد
مع ميكانيكي1 :1 دردشة
الخبراء المرخصون متاحون على مدار الساعة طوال أيام األسبوع
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 10/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
Get an Answer
لدي سؤال عن رمز الخطأcat 323dl " اقرأ المزيد ... وضع التنقل المحدود كيف يمكنني التغلب على هذه المشكلة
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,335 satisfied customers
★★★★★
312 cat 7dk (6gk) no rpm in monitor.. governor no good .. Manuel cables were installed. Prv
not actuating correctly and motor bogs .. will crank speed sensor work alone for prv or do i
need to install… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,335 satisfied customers
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 11/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
I need to know what wire does what for the back up alarm on
I need to know what wire does what for the back up alarm on a John deere 870G LC serial #
*****************… read more
Wayne
Journeyman
Vocational, Technical or Trade Scho
1,478 satisfied customers
★★★★★
How do I silence the backup alarm on my D6N Cat.? Serial number ALY02988 … read more
★★★★★
Was in a conversation with Catmastertech about a cat 320 throttle problem. I just today got
to use the information he provided me. I now have a code E15 and E18 and need a code
chart and a calibration… read more
1
catmastertech
Field service technician مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
Vocational, Technical or Trade Scho
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 12/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
2008 450j deceleration pedal not working after calibration … read more
Dan
Technician
Auto Mechanics 1&2/diesel mech
15,458 satisfied customers
Bradley Martin
77 satisfied customers
★★★★★
Hi there. i have a Cat 420eit sn:DAN00662 when i put it in any gear and push the direction
lever to forward or reverse i get a malfuntion light and audible alarm but the machine will
drive. any idea w… read more
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
catmastertech
Field service technician
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 13/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,335 satisfied customers
★★★★★
Don't have power to back up alarm. Fuse ok. Is there a pressure switch that gives the circuit
power when you move? (Case cx 130 track hoe) … read more
Wayne
Journeyman
Vocational, Technical or Trade Scho
1,478 satisfied customers
hi I've a cat 950f series 11the gears are stuck in 3rd in manual mode and second in auto shift
mode the loader still moves backwards and forwards could it be the shifter… read more
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 14/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,335 satisfied customers
hy,I have one CAT D6R Series 2 , strange complaint notice even the machine in neutral ,just
put the speed control to 1 it will move forward and when put to 3rd it will reverse.. … read
more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,335 satisfied customers
Show more
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from
individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general
information, are not intended to substitute for informed professional advice (medical, legal,
veterinary, financial, etc.), or to establish a professional-client relationship. The site and services
are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications
of Experts. To see what credentials have been verified by a third-party service, please click on the
"Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for
EMERGENCY questions which should be directed immediately by telephone or in-person to
qualified professionals.
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 15/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
Disclaimer: Information in questions answers, and other posts on this site ("Posts")
comes from individual users, not JustAnswer; JustAnswer is not responsible for
Posts. Posts are for general information, are not intended to substitute for informed
professional advice (medical, legal, veterinary, financial, etc.), or to establish a
professional-client relationship. The site and services are provided "as is" with no
warranty or representations by JustAnswer regarding the qualifications of Experts.
To see what credentials have been verified by a third-party service, please click on
the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or
designed for EMERGENCY questions which should be directed immediately by
telephone or in-person to qualified professionals. Show Less
Since 2003, we’ve helped more than 9 million people in 196 countries and have an A+ rating
with BBB and a 9.6/10 rating with TrustPilot.
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 16/19
م12:17 2023/2/26 لدي مشكلة مماثلة اآلن معcb534d فعلت معايرة المقبض مع.ال يتحرك لألمام أو للخلف
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 17/19
262/ 12:17 2023/م ال يتحرك لألمام أو للخلف .فعلت معايرة المقبض مع cb534dلدي مشكلة مماثلة اآلن مع
Allison, USA
★★★★★ Rated:
هل فصل الشتاء يخفض فواتير التدفئة الخاصة بي؟ مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
بقلم جيسيكا كليمكزاك
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 18/19
262/ 12:17 2023/م ال يتحرك لألمام أو للخلف .فعلت معايرة المقبض مع cb534dلدي مشكلة مماثلة اآلن مع
JustAnswerحول وظائف
كيف تعمل كن خبيًر ا
غرفة الصحافة كن حليفا
قم بإحالة خبير
.كل الحقوق محفوظة © 2003-2023 JustAnswer LLC. سياسة الخصوصية شروط الخدمة اتصل بنا خريطة الموقع
1
مرحبًا! كيف يمكنني المساعدة في سؤال معدات البناء الخاصة بك؟
https://www.justanswer.com/construction-and-road-equipment/bsyl2-similar-problem-right-cb534d-not-moving.html 19/19