Professional Documents
Culture Documents
MEEN221101010
Load=100kg
Safety factor=10
Yield strength=200MPa=200*10^6 Pa
Density of steel=7.9g/cm^3=7750kgm^-3
Corrosion rate=100*10^-6m/year
Thickness?
Area=200*200
Area=40000mm^2
=0.04m^2
Thickness=FL/Y*SF*A
F=mg=100*9.8=980N
Thickness=1.225*10^-3 m^2
QUESTION 2:
The most economic option is would be third option spray painting the whole frame as it is the cheapest
option among the three given with a cost of 40/m^2.
QUESTION 3:
The less economic option can become most suitable when the service condition of the frame is such that
it is exposed to harsh, environment or heavy use.
For Example: marine or industrial condition. In such cases the corrosion protection offered by
electroplating or spray painting would be more important than the cost difference.